| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 15020 | Norbar 15020 - TW MDL 25 PROF 1/4" SQ DR REV. RAT. N.m ONLY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98A21001502000 | PROTECTIVE PLATE-HEAT EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32101502000 | HOIST HOISTING EQUIPMENT-MLG ACTUATIN (CALIBRATION) (CALIBRATION) | 1 | |
| 0141015020 | EJECTOR ASSY | 1 | |
| 1-50209A | SCREW 5/16-18 X1.25 | 1 | |
| 14C22L215020009 | THIS IS NOT A TOOL | Not Available | Not Available |
| 150-200 | WING COVERS, WINTER USE (set of 2) | 1 | |
| 150-2012 | TOOL | 1 | |
| 150-205 | WING COVERS, ALL YEAR USE (set of 2) | 1 | |
| 150-206 | Mitutoyo 150-206 Micrometer Head 1" | 1 | |
| 150-207 | Mitutoyo 150-207 Micrometer Head 1" | 1 | |
| 150-208 | Mitutoyo 150-208 Micrometer Head 1" | 1 | |
| 1502-0000-000 | HAND PUMP OF TOWBAR（UTOWE170-C-4） | 1 | |
| 15020-00 | WINGRIP VACUUM MODULE | 1 | |
| 15020-00/A320 | A320 WING GRIP | 1 | |
| 15020-00A | VACUM MODULE | 1 | |
| 15020000 | 561-3/4" UNIVERSAL JOINT | 1 | |
| 150203 | Plate Assy Support | 1 | |
| 150204 | WASHER: WROUGHT,ST, | 1 | |
| 1502057 | TEE FITTING, | 1 | |
| 19150-20629 | THIS IS NOT A TOOL | Not Available | Not Available |
| 23310CA015020 | THIS IS NOT A TOOL | Not Available | Not Available |
| 33.04732A-21-50200-10-13 | THIS IS NOT A TOOL | Not Available | Not Available |
| 33.04732A-21-50201-11-14 | THIS IS NOT A TOOL | Not Available | Not Available |
| 33.04733A-21-50200-10-13 | THIS IS NOT A TOOL | Not Available | Not Available |
| 33.04734A-21-50200-10-13 | THIS IS NOT A TOOL | Not Available | Not Available |
| 35-92115-0201 | Herramienta calibra AOA | 1 | |
| 4115-0201W26 | NLG WHEEL AXLE PROTECTOR | 1 | |
| 4115-0201W28 | NLG WHEEL AXLE PROTECTOR | 1 | |
| 615020-101AT1 | Assembly Tool, Marcel | 1 | |
| 826480215020 | EASYC UT 3/4 | 1 | |
| 93A15020 | CONTROL UNIT | 1 | |
| 9556415020 | WASHER | 1 | |
| 9681502004 | O-RING | 1 | |
| 97A71502002000 | TOOL | 1 | |
| 98A10001502000 | COVER,BLANKING-ENGINE AIR INTAKE | 2 | |
| 98A21001502000 | PROTECTIVE PLATE-HEAT EXCHANGER | 4 | |
| 98A210015020000 | PROTECTIVE PLATE | 1 | |
| 98A32101502000 | HOISTING EQUIPMENT-MLG ACTUATING CYLINDER | 5 | |
| 98A71101502000 | HOLD-OPEN FIXTURE - 55 PW FAN COWL | 8 | |
| 98A71101502001 | HOLD-OPEN FIXTURE - 55 PW FAN COWL | 1 | |
| 98A71101502002 | HOLD-OPEN FIXTURE - 55 PW FAN COWL | 1 | |
| A1000150200000 | COVER INLET ENGINE | 1 | |
| A109BF-2150-20 | RECEIVER | 1 | |
| ACTR4150-20 | CENTER TEE FITTING | 1 | |
| ADAG150/200-945 | Air Data Accessories Kit - Gulfstream Galaxy G200 / G150 | 3 | |
| ARP-1.50/2.0-100HZ | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.50"Ø ID x 2.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AT150-20A | CUTTER WHEEL ABRASIVE | 1 | |
| AT150-20A-U | 6PK 36 GRIT 1/16 CUTOFF WHL | 1 | |
| BF1864L-4995-481-50-2-0-32 | FINAL REAMER 1/2 NOMINAL | 1 | |
| C12051T-1-.5020P | THIS IS NOT A TOOL | Not Available | Not Available |
| CS-295-AG1150201 | Actuador equipado | 1 | |
| E915020 | HYGRO/THERMOMETER GADGET | 1 | |
| EEHD215020 | PRO-LINK , HARDENED CARRY CASE | 1 | |
| EK-1-5-020 | PROBE CABLE (BNC TO MICRODOT) | 1 | |
| EK-1.5-020-LP | CABLE - PROBE BNC MICRODOT 1.5M LONG | 1 | |
| FIR-718-15020-D | CUTTING TOOL | 1 | |
| FSN15020040 | SAFETY VEST LIME COLOR | 1 | |
| G115-020 | CANOPY/ENGINE COVER | 1 | |
| G150-200 | INTAKE PLUGS (set of 2) | 1 | |
| H150-2000-1 | FRAME ASSY, TOP | 1 | |
| H150-2000-10 | CROSS BRACE ASSEMBLY | 1 | |
| H150-2000-11 | TUBE | 1 | |
| H150-2000-12 | ANGLE | 1 | |
| H150-2000-13 | PLATE | 1 | |
| H150-2000-14 | TUBE | 1 | |
| H150-2000-15 | BUSHING | 1 | |
| H150-2000-2 | UPPER FRAME | 1 | |
| H150-2000-20 | PLATE | 1 | |
| H150-2000-21 | PLATE | 1 | |
| H150-2000-22 | PLATE | 1 | |
| H150-2000-23 | PLATE | 1 | |
| H150-2000-24 | PLATE | 1 | |
| H150-2000-25 | PLATE | 1 | |
| H150-2000-26 | TUBE 31" LONG | 1 | |
| H150-2000-27 | TUBE 86.5" LONG | 1 | |
| H150-2000-28 | TUBE 35" LONG | 1 | |
| H150-2000-29 | BAR 3.375" LONG | 1 | |
| H150-2000-3 | UPPER FRAME ASSY | 1 | |
| H150-2000-30 | BAR 26.5" LONG | 1 | |
| H150-2000-31 | REC TUBE 16" LONG | 1 | |
| H150-2000-32 | REC TUBE 19.625" LONG | 1 | |
| H150-2000-33 | RECT TUBE 31.625" LONG | 1 | |
| H150-2000-34 | REC TUBE 25" LONG | 1 | |
| H150-2000-35 | REC TUBE 31" LONG | 1 | |
| H150-2000-36 | REC TUBE 33.625" LONG | 1 | |
| H150-2000-4 | UPPER FRAME ASSY | 1 | |
| H150-2000-5 | UPPER FRAME ASSEMBLY | 1 | |
| H150-2050-1 | SEE HP-6032-1 | 1 | |
| LN94-15020 | COTTER PIN | 1 | |
| M15020 | Guide | 1 | |
| N4150200 | REMOTE CONTROL IV9000 | 3 | |
| OUT15020 | Seal Lifting Tool | 1 | |
| OUT15020PM | SEAL FITTING TOOL | 1 | |
| R150-200 | WING COVERS, WINTER USE (set of 2) | 1 | |
| R150-205 | WING COVERS, ALL YEAR USE (set of 2) | 1 | |
| RSMV-S/SL 15.0-20.0 | RSMV-S/SL ? 15,0 - 20,0 x 110 mm | 1 | |
| S1821502-02 | THIS IS NOT A TOOL | Not Available | Not Available |
| S1821502-06 | THIS IS NOT A TOOL | Not Available | Not Available |
| S2541015020000 | THIS IS NOT A TOOL | Not Available | Not Available |
| ST1864L-4970-481-50-2-0-32 | FINAL REAMER 1/2 | 1 | |
| ST1864L-4995-481-50-2-0-32 | FINAL REAMER 1/2 NOM | 1 | |
| STARD150-20 | SCREW | 1 | |
| T-10173-1502-0101 | TOOL | 1 | |
| XKW 150-20 | POWER SUPPLY | 1 | |
| Z1502-01 | WELDMENT: STEERING AXLE, | 1 | |
| Z1502-02 | WELDMENT, | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
