| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 15001 | CANVAS TOOL ROLL 6 comp | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 361-015-001 | GTF-6 CAPACITANCE TEST SET (CALIBRATION) | 2 | |
| (CALIB) 51500-100 | LATCH TESTER (CALIBRATION) | 2 | |
| 00160-115-001 | EXTENSION SAFETY STAY | 1 | |
| 01-1215-0010 | TOWBAR, | 1 | |
| 0150 017 6700 | TOOL | 1 | |
| 0150 017 7700 | TOOL | 1 | |
| 0150 017 8700 | TOOL | 1 | |
| 0150 017 9700 | TOOL | 1 | |
| 0150-0169600 | HELI-COIL INSTALLATION TOOL | 1 | |
| 0150-0174-700 | INSTALLATION TOOL | 1 | |
| 01500103000 | INSTALL TOOL | 1 | |
| 01500103000/10 | INSTALL TOOL | 1 | |
| 01500104000 | INSTALL TOOL | 1 | |
| 01500104000/10 | INSTALL TOOL | 1 | |
| 01500105000 | INSTALL TOOL | 1 | |
| 01500105000/10 | INSTALL TOOL | 1 | |
| 01500112900 | M12 X 1.25 MANUAL INSTALLATION TOOL FOR HELICOIL CLASSIC | 1 | |
| 01500112900/10 | M12 X 1.25 MANUAL INSTALLATION TOOL FOR HELICOIL CLASSIC | 1 | |
| 01500165600 | INSTALL TOOL | 1 | |
| 01500165600/10 | INSTALL TOOL | 1 | |
| 01500167600 | INSTALLATION TOOL FOR INSERT | 1 | |
| 01500167600/10 | 6-32UNC SL INSTALLATION TOOL | 1 | |
| 01500168600 | INSTALL TOOL | 1 | |
| 01500168600/10 | INSTALL TOOL | 1 | |
| 01500169700 | INSTALL TOOL | 1 | |
| 01500169700/10 | HELICOIL INST.TOOL TYPE H-PSG 10-32 UNF | 1 | |
| 01500174000 | TOOL-INSERTION | 1 | |
| 01500174700/10 | INSTALLATION TOOL | 1 | |
| 01500176700/10 | 5/16UNF SL INSTALLATION TOOL | 1 | |
| 01500177700/10 | INSERTION TOOL 3/8-24 UNF | 1 | |
| 0261500110 | THIS IS NOT A TOOL | Not Available | Not Available |
| 04−6150−0120 | Crane − Floor with Gooseneck Boom | 6 | |
| 042-1500-170 | ENGINE OIL FILLING PUMP SET | 1 | |
| 0465150010 | PLUG | 1 | |
| 05017015001 | KRAFTFORM PLUS 917 SPH PH3 S/D | 1 | |
| 071-50012-8101 | TEST PANEL | 1 | |
| 082215-001 | PORTABLE HYDRAULIC TEST STAND - MODEL HIP-D-9SS | 1 | |
| 114150-01 | PORTABLE MEDIA LOAD-ER | 1 | |
| 115-00136 | LEADS, | 1 | |
| 115001 | Push Inox (manual, stainless steel) | 1 | |
| 1159P41500-1-2 HOE | HOIST | 1 | |
| 1206BB1500164 | TEST GAUGE (RANGE 0 / 2500PSI) | 1 | |
| 15-0015-01 | LABEL BATTERY | 1 | |
| 150-010 | CANOPY COVER, Wrap-Around, (early models,1959-1963) | 1 | |
| 1500104000 | INSTALL TOOL | 1 | |
| 1500105000 | INSTALL TOOL | 1 | |
| 1500160 | KICKSTRIP | 1 | |
| 1500165600 | INSTALL TOOL | 1 | |
| 1500169700 | Thread Gauge for Inserts | 1 | |
| 1500174000 | TOOL | 1 | |
| 1500174700 | TOOL FOR THE INSTALLATION OF THE THREAD INSERTS | 1 | |
| 18-4315-0010 | CART NITROGEN | 1 | |
| 20203600015001 | CRIMP TOOL | 1 | |
| 2024150-01 | TOOL | 1 | |
| 206-215-001-101 | Bender Assembly | 1 | |
| 206-215-001-101/002-101 | B206B/L Trim Tab Tool Set | 1 | |
| 2150-01-D50 ORA-N | EMI SHIELDING GASKET | 1 | |
| 215150-010-200 | THIS IS NOT A TOOL | Not Available | Not Available |
| 231500-11 | FLAP | 1 | |
| 256150-01 | POWER SUPPLY TESTER | 1 | |
| 261500123-2501 | THIS IS NOT A TOOL | Not Available | Not Available |
| 27F-212-35-10-0015-001 | PITOT PROBE-TO-EXTERNAL BENCH TEST ADAPTER | 1 | |
| 291500-1 | VALVE TEST CONSOLE | 1 | |
| 30-2115001-00 | TOOL | 1 | |
| 3032150-018 | REPAIR KIT 848847 | 1 | |
| 32415-001 | SYRINGE | 4 | |
| 32515-001 | CELL PULLER | 4 | |
| 3321500-12B | THIS IS NOT A TOOL | Not Available | Not Available |
| 3321500-17 | TOOL | 1 | |
| 3401500-105 | TOOL, VULCANIZING | 1 | |
| 355A91115001 | ROTORBLADE SLING | 1 | |
| 35M5M0.115.001 | DADC TEST SET | 1 | |
| 361-015-001 | TEST SET FUEL QTY. | 4 | |
| 361-015-001 (CALIB) | GTF-6 CAPACITANCE TEST SET | 1 | |
| 365A91-1150-01 | MAIN ROTOR BLADE SLING | 1 | |
| 365A91-2150-01 | CARGO SLING | 1 | |
| 3791500-1 | VALVE TEST CONSOLE | 1 | |
| 407-015-001-111 | BLADE ASSY, MAIN ROTOR | 1 | |
| 407-215-001-101 | 407 Trim Tab Bender | 1 | |
| 4115-0010W02 | CALIBRATION RING REMOVAL TOOL | 1 | |
| 41500167700 | HERLICOIL PLUS INSTALLAYOION MANDREL UNF 6-4 | 1 | |
| 41500167700/10 | HERLICOIL PLUS INSTALLAYOION MANDREL UNF 6-4 | 1 | |
| 429-215-001-101 | GAUGE ASSEMBLY | 1 | |
| 43150010 | *OBSOLETE see 43153010* 10760.CV.10-10MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150011 | *OBSOLETE see 10016072* 10760.CV.11-11MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150012 | *OBSOLETE see 43153012* 10760.CV.12-12MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150014 | *OBSOLETE see 43153014*10760.CV.14-14MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150017 | *OBSOLETE see 43153017*10760.CV.17-17MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 43150019 | 19MM HEXKEY WRENCH NICKELPLATE | 1 | |
| 45A99515-001 | SLING ASSY | 2 | |
| 491500110 | ALUMINIUM POT | 1 | |
| 51500100 | LATCH TESTER | 1 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 3 | |
| 608-6615-001 | TX CIRCUIT CARD | 1 | |
| 61-5001-1037-6 | SCRUBBING PAD | 1 | |
| 61-5001-4173-6 | ROLOC DISC BROWN | 1 | |
| 61-5001-4178-5 | ROLL SURFACE CONDTIO | 1 | |
| 61-5001-4179-3 | ROLOC DISK MAROON | 1 | |
| 61-5001-7576-7 | 3M SR CUTTER #8, .83INX1.015IN | 2 | |
| 61-5001-7577-5 | 3M SR CUTTER #3, .40INX.975IN | 1 | |
| 615-0015-018-781 | EDDY CURRENT CABLE | 1 | |
| 6150-01-028-4279 | TEST CABLE | 1 | |
| 6150-01-362-8670 | CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL | 1 | |
| 6150-01-393-9676 | CABLE | 1 | |
| 6150015921369 | SIMPLEX MERLIN PORTABLE LB MERLIN 200 HAS TO BE THE MERLIN AND CANNOT BE REPLACED MATCHED WITH NSN ATTACHED. | 1 | |
| 618-5615-001 | THIS IS NOT A TOOL | Not Available | Not Available |
| 64099804-6150-01-007-2819 | CABLE ASSEMBLY | 1 | |
| 6504-FE2015001 | SPECIAL WRENCH | 1 | |
| 6531115001 | CABLE | 1 | |
| 65B1500-1 | Boeing | 1 | |
| 687-9715-001 | THIS IS NOT A TOOL | Not Available | Not Available |
| 7-562115001-503 | HADS TEST KIT | 1 | |
| 7-562115001-603 | HADS TEST KIT | 1 | |
| 7-562115001-603/CSAHADS | HADS TEST KIT | 1 | |
| 70072-15001-012 | THIS IS NOT A TOOL | Not Available | Not Available |
| 70072-15001-015 | PLUG KIT, 3INX25 | 1 | |
| 70072-15001-016 | PLUG KIT, 3INX50. | 1 | |
| 701-5001000 | Body ,Assy-Cylinder | 1 | |
| 826486415001 | EASY CUT 1-1 | 1 | |
| 830-8615-001 | POWER SUPPLY TEST CABLE | 1 | |
| 846-011-500-1 | Kit,extractors | 1 | |
| 853-115-001-0 | WRENCH | 1 | |
| 90600F71115001000 | Thrust reverser locking flag | 1 | |
| 9102150-01 | Road Runner Jack Point Aircraft Weighing System | 1 | |
| 9150-01-078-9586 | LUBRICATING FLOUROCENT | 1 | |
| 91500-1 | AMP CRIMP TL 20-14AWG | 8 | |
| 95-92015-001 | ENGINE CONTROL RIGGING SET | 1 | |
| 95-92115-001 | VERTICAL STAB SUPPORT | 1 | |
| 96700-15001-041 | TAIL ROTOR BOOT EXPANDER TOOL | 1 | |
| 97D53108315001 | DEVICE-MILLING,FRAMES | 1 | |
| 980-8015-001 | TEST SET | 1 | |
| 980-9015-001 | CVR TEST SET | 1 | |
| 98A21001500100 | BASE | 1 | |
| 98A27407515001 | TROLLEY-THS ACTUATOR | 1 | |
| 98A27501500101 | TUBE | 1 | |
| 98A27501500102 | HALF SHELL | 1 | |
| 98A27501500103 | LUG | 1 | |
| 98A27501500104 | FORK END | 1 | |
| 98A27501500105 | EYE END | 1 | |
| 98A27501500106 | RIGGING PIN | 1 | |
| 98A27501500150 | CLAMP ASSY | 1 | |
| 98A27508015001 | CHECK PIN SET - FLAP NEUTRAL SETTING | 4 | |
| 98A32101500101 | 1 | ||
| 98A32101500108 | HALF SHELL | 1 | |
| 98A32401500100 | BOLT | 1 | |
| 98A52308015001 | RIGGING PIN | 1 | |
| 98A54003115001 | PROTOTYPE | 1 | |
| 98D7110H015-001 | KIT - FAN COWL BULLETS | 1 | |
| 99A76101500100 | RIGGING PIN ASSY | 1 | |
| 99A76101500101 | PIN RIGGING | 1 | |
| 99A76101500103 | EAR | 1 | |
| A01-670-1500-1 | Brake Pressure Unit - Adjusting And Servicing | 1 | |
| AGE-01215-001 | STOP-AL | 1 | |
| AGE-02715-001 | BASE, RUBBER | 1 | |
| AGE-03815-001 | SPECIAL BIT, CVR MIC SCREW INSTL/REM | 2 | |
| AM-91500-150T-H900 | SAFETY PIN ASSEMBLY | 1 | |
| AM-91500-160T | TOO | 1 | |
| AN/PSM-37 361-015-001 GTF-6 | FUEL CAPACITANCE TEST | 1 | |
| AP150-010-000-1 | GROUND CHECK PRESSURE SOURCE | 1 | |
| ARM0150011001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | |
| ARM01500168700 | 8-36 HELICOIL INSERT TOOL HPSG | 1 | |
| AS15001-3P | LUBRICATED FITTING | 1 | |
| AURY-1.500-1.625/3WL | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, 1.500"-1.625"OD, 3.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AV13J15001 | TOOL | 1 | |
| B8150-019 | GLAND, | 1 | |
| C00813415-001 | C00813415-001 | 1 | |
| C01615001-GT0002-0001 | AILERON PCU TIE BAR ASSY | 1 | |
| C201-1500-1 | SOLENOID VALVE | 1 | |
| C6U1500-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| C84215-001 | HSTA RIGGING BAR | 5 | |
| CMM2150-01 | PACK REHEATER DIFF PRESS. | 1 | |
| CS-AGE-31500-1549 | Latiguillo Nº3 | 1 | |
| D23111500-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| D23111500-1A | INBOARD LOWER HARNESS | 1 | |
| D3615001800000 | THIS IS NOT A TOOL | Not Available | Not Available |
| D533-15-001 | SWITCH-SHUT OFF | 1 | |
| DP2X 400-01-50-01 | DP2X PNEUMATIC DISPENSER 400ML 1:1 / 2:1 | 1 | |
| DT2515-001S | TRIPOD JACK TELESCOPIC (E170 MAIN) | 1 | |
| EMB-01115-001 | Wrench | 1 | |
| ESRY1.500-1.625 | ELOTEST Standard Rotor Y Probe, 1.500- 1.625 Diameter, Shielded..100Khz-2Mhz | 1 | |
| EX601R47015−001 | Calibration reference standard − piano hinge passenger door (Bombardier Inc.) | 1 | |
| F-16-15-001 | BULKHEAD BLEND TOOL - ES3 | 1 | |
| F01-42-1-15-0010 | SHEAR BOLT FOR TOWBAR FALCON 50/90/900 | 1 | |
| F01-43-1-15-0010 7,2х82 | SHEAR BOLT FOR TOWBAR ЕМВ 170/175/190/195 | 1 | |
| F1150-013 | CARBIDE COUNTERSINK DRILL | 1 | |
| F15-001 | CANOPY COVER (dual seat models) | 1 | |
| F3215001000200 | PIN ASSY–SHORTENING MECHANISM | 1 | |
| F533-R1115-000W6400-01 F533-R1115-001W6400-01 | TOOL | 1 | |
| F533-R1115-000W6400-02 F533-R1115-001W6400-02 | TOOL | 1 | |
| F533-R1115-000W6400-03 F533-R1115-001W6400-03 | TOOL | 1 | |
| F533-R1115-000W6400-04 F533-R1115-001W6400-04 | TOOL | 1 | |
| F533-R1115-000W6400-05 F533-R1115-001W6400-05 | TOOL | 1 | |
| F533-R1115-000W6400-06 F533-R1115-001W6400-06 | TOOL | 1 | |
| F533-R1115-001W6400-01 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=953 | 1 | |
| F533-R1115-001W6400-02 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=953 | 1 | |
| F533-R1115-001W6400-03 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=1456 | 1 | |
| F533-R1115-001W6400-04 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=1456 | 1 | |
| F533-R1115-001W6400-05 | TOOL | 1 | |
| F533-R1115-001W6400-06 | TOOL | 1 | |
| F891500170 | THIS IS NOT A TOOL | Not Available | Not Available |
| G1002440015-001 | External Power Receptacle Support | 1 | |
| GAP51-5001 | DIMPLING DIE 7/16 PILOT (MALE DIE) | 1 | |
| GSB2715001 | TOOL-LEFT GEAR TAB RIGGING (DRAWING AND MYLAR TEMPLATE) | 3 | |
| GSB2715001-IAS | AILERON GEAR TAB RIG TOOL L/H Q400 | 1 | |
| H150E-1500-1 | PUMP ASSY | 1 | |
| HAY01500169700 | 10/32 UNF INSERT TOOL | 1 | |
| HAY01500174700 | 1/4-28 UNF INSERT TOOL | 1 | |
| HRY1.500-1.625 | Adjustable Scanner Probe, Y type for Hocking Mini, 500KHZ-2MHZ | 1 | |
| HU41500-1 | GUIDE RING | 1 | |
| KL0015-0015 | NUT | 1 | |
| KL415-0010 | ADAPTOR FOR M22X1.55 | 1 | |
| LMV-001-500-1 | Adaptation stockage tbp axevertical | 1 | |
| M15-001 | CANOPY/NOSE COVER, UTI model | 1 | |
| MM36-11-18-715-001 | REV FLOW CHECK CONTROLER TOOL | 1 | |
| MS15001 | GREASE FITTING | 1 | |
| MS15001-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| MS15001-3 | GREASE FITTING | 1 | |
| NM115001-0200 | THIS IS NOT A TOOL | Not Available | Not Available |
| OR15,00- 1,00SIMRIT72NBR872 | THIS IS NOT A TOOL | Not Available | Not Available |
| PYT1500102 | SINGLE TOOL HOLSTR RETRAC BELT | 1 | |
| PYT1500105 | SNGL TOOL HOLSTER BELT DEEP | 1 | |
| PYT1500106 | DUAL TOOL HOLSTER BELT | 1 | |
| PYT1500107 | DUAL TOOL HOLSTER RETRAC BELT | 1 | |
| PYT1500108 | DUAL TOOL HOLSTER HARNESS | 1 | |
| PYT1500110 | COMFORT BELT 28IN TO 36IN | 1 | |
| PYT1500111 | COMFORT BELT 36IN TO 44IN | 1 | |
| PYT1500112 | COMFORT BELT 2XL & 3XL | 1 | |
| PYT1500113 | UTILITY BELT SM-L 28-46IN | 1 | |
| PYT1500114 | UTILITY BELT XL-3XL 40-54IN | 1 | |
| PYT1500116 | BELT LOOP W D RING 10PK | 1 | |
| PYT1500118 | BELT LOOP W TRIGGER 10PK | 1 | |
| PYT1500119 | SMALL PARTS POUCH CANVAS BLACK | 1 | |
| PYT1500120 | SM PARTS POUCH CANVAS CAMO | 1 | |
| PYT1500121 | SMALL PARTS POUCH BELT | 1 | |
| PYT1500123 | SM PARTS POUCH EXDEEP CNVS BLK | 1 | |
| PYT1500126 | TOOL POUCH W D RING AND 2 TRIG | 1 | |
| PYT1500132 | PYTHON UTILITY POUCH | 1 | |
| PYT1500133 | BUCKET 100LB DRAWSTRING CANVAS | 1 | |
| PYT1500134 | LIFT BUCKET 100LB CANVAS H/L | 1 | |
| PYT1500136 | EXTRA DEEP LIFT BKT 4FT | 1 | |
| PYT1500140 | BUCKET 250LB RTD HOOKLOOP VNYL | 1 | |
| PYT1500159 | 2CARABINER COIL TETHER W/SWIVE | 1 | |
| PYT1500175 | QUICK WRAP YLW HD 1IN 10 ROLL | 1 | |
| RI 1500/1 52692 | SPACING WASHER FOR PIPE CUTTER | 1 | |
| RL 1500/1 | GUIDE ROLLERS FOR PIPE CUTTERS | 1 | |
| RRY1.500-1.625 | Rechii Y Probe,1.500"-1.625", 100KHz-2MHz | 1 | |
| S1201001500100 | THIS IS NOT A TOOL | Not Available | Not Available |
| S15001601 | PCB ASSY PROG VERSATORQ2 | 1 | |
| SG215-001 | REMOTE SITE RESCUE STAND | 1 | |
| SHC-I-150-0,1 | CALIPER | 1 | |
| SPD70150-011-041 | MAIN ROTOR BLADE - CONTAINER | 1 | |
| ST926C-375-1500-1400 | 1 | ||
| ST931-500-1687 | BALL STAKE TOOL | 1 | |
| ST932-1062-1500-1-2 | TOOL | 3 | |
| T-AV13J15001 | TOOL | 1 | |
| T-P1500-10 | PEGS SOCKET RAIL 10PK | 1 | |
| URY1.500-1.625 | Unirotor (Universal) Y Probe, 1.500"-1.625" Diameter, 100KHz to 2MHZ | 1 | |
| VES15001221 | KEY PAD | 1 | |
| WER05000015001 | PLASTIC HAMMER CELI INSRT 32MM | 1 | |
| WIA6715-001 | THIS IS NOT A TOOL | Not Available | Not Available |
| WO-20150215001 | TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
