| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 15000 | PLUG | 4 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 95S55070015000 | TORQUE GUIDE FOR VERTICAL STAB | 1 | ||
| (CALIB) 97S06000015000 | WING SETTING TOOL RIB27/28 | 1 | ||
| (CALIB) 98A21001500000 | TOOL INSTALLATION POSITIONING TOOL-R (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A27407515000 | ACTUATOR TROLLEY-THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A27608015000 | STTNG.GG.ST.ACT.ADJ. (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A32104150000 | PIN-EXTRACTOR-MAIN GEAR PICKUP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A32104150001 | EXTRACTR EXTRACTOR - PIN - MAIN GEAR PIC (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27504015000 | RIGGING BOARD-FLAP RIGGING (TRACK 3) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27504115000 | SETTING GAUGE, SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D52307515000 | SAFETY LOCK-ACTUATOR, CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D54003015000 | R/I RING AT RIB 4/5 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D71203015000 | IDG R/I CRADLE (CFM) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32104015000 | COLLAR SAFETY COLLAR-DOOR CLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32201015000 | NLG NLG-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57103015000 | FASTENER EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27209015000 | ADAPTER ADAPTER-TURN BARREL,UPPER RUDDE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32104015000 | STRUT STRUT-SAFETY, BLG DR FOLDED (WI (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L52108515000 | WEIGHT WEIGHT-BALLAST,SLIDE RAFT MDD 1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S27005015000 | PITCH UNCOUPLING RESET TOOL | 1 | ||
| (CALIB) 98S28002515000 | FUEL PUMP INSTALLATION TOOL | 1 | ||
| (CALIB) 98S53005015000 | CROWN PANEL BTWN FRAME 23&29 | 1 | ||
| (CALIB) 98V27508815000 | HOIST FL DR H-A LINK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V55109015000 | LLF REPAIR TOOL - HTTP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) M28TC0015000 | TEST ADAPTER - DISPENSE PUMP | 1 | ||
| 0-15000 | 0-15000 PSI GAUGE | 1 | ||
| 0-15000 PSI | PRESSURE GAUGE (TOOL) | 1 | ||
| 001-171-500018 | LENS:10GPM, | 1 | ||
| 00134-015-000 | HAND PUMP | 1 | ||
| 00162-150-000 | Hoist-Mini Lift, R/I APU,THS ACT | 1 | ||
| 00162-150-001 | lifting beam | 1 | ||
| 00196-015-000 | WARNING STREAMER | 1 | ||
| 004-150-0010 | ELASTIC-FORMING-TOOL | 1 | ||
| 00460-015-000 | ADAPTER - TRIPOD JACK | 1 | ||
| 00464-315-000 | BALL LOCK PIN | 1 | ||
| 00468-150-000 | SPHERICAL PLAIN BEAR | 1 | ||
| 00489-215-000 | STOP VALVE | 1 | ||
| 00490-815-000 | TOOL | 1 | ||
| 00490-915-000 | INDICATING LABEL | 1 | ||
| 00941-115-000 | CABLE ADAPTOR FOR TRIPOD JACKS | 1 | ||
| 01-0515-0000 | HEAD: TOWBAR,CHALLENGER, TRONAIR,ST | 5 | ||
| 01-1215-000 | TOW BARS(COLLAPSIBLE) | 1 | ||
| 01-1215-0000-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1215-0000-A3 | Towbar, Port Atr 42/72 (Ce) | 1 | ||
| 01-1215-0000A4 | TOWBAR, | 1 | ||
| 01-1951-5000 | COUPLER, | 1 | ||
| 01−1215−0000 | Tow Bar − Collapsible Air Transportable | 7 | ||
| 01500024 | 540.A.3/8-1/4DR x 3/8"AF CROW FOOT | 1 | ||
| 01A1215-0000 | Towbar, Portable Universal (Ce | 1 | ||
| 01B1215-0000 | TOWBAR, PORTABLE UNIVERSAL(CE), | 1 | ||
| 021851-5000 | SPECIFIC TOOL | 1 | ||
| 0261500080 | WASHER | 1 | ||
| 0292815000 | PIPE,EXHAUST | 1 | ||
| 03-4015-0000 | STAND, NOSE WESTWIND | 1 | ||
| 03-5815-0000 | TAIL STAND | 2 | ||
| 0301500010 | UNION | 1 | ||
| 0301500020 | DUCT | 1 | ||
| 0301500030 | DUCT | 1 | ||
| 0460-015-000 | JACK ADAPTER | 1 | ||
| 06-5020-1500-08 | OPTION: TO, | 1 | ||
| 06-5021-1500-08 | OPTION: TO, | 1 | ||
| 06-5044-1500-08 | OPTION: TOTALIZER, | 1 | ||
| 071-50001-8102 | TOOL | 1 | ||
| 071-50004-8101 | TEST PANEL | 1 | ||
| 071-50004-8102 | TEST PANEL | 1 | ||
| 071-50004-8103 | TEST PANEL | 1 | ||
| 071-50004-8104 | TEST PANEL | 1 | ||
| 08-2015-0000 | STAND, | 1 | ||
| 1-09415-00-00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1.50000.80 | POWER SOURCE BOROSCOPE | 1 | ||
| 1115-000-01 | TRANSDUCER | 1 | ||
| 115-000-411 | PHASED ARRAY PROBE | 1 | ||
| 115-00039 | HOSE ASSY, | 1 | ||
| 115-00052 | SHAFT&PIST, | 1 | ||
| 115-00056 | Barfield 115-00056 Pitot Static Test Hose Kit, 25 ft L, For Aircraft | 8 | ||
| 115-00057 | ADAPTER: PITOT STATIC, | 4 | ||
| 115-00058 | KIT: HOSE,PITOT ADAPTER,25FT, | 2 | ||
| 1150003-604-004 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1150008-601-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 120780150001 | TEST BOX | 1 | ||
| 121580215000 | HARNESS | 1 | ||
| 121880150001 | CABLE C1 | 1 | ||
| 1397-1500-001 | ODOMETER ADAPTER BOX | 1 | ||
| 141811001500.00 | EWE8000PTG-R - PORTABLE THREAD GENERATOR RADAR | 1 | ||
| 15-0007-43 | LIGHT,COCKPIT A/C | 1 | ||
| 15-0009-01 | BATTERY CHARGER 230 V AC TO 9 V DC 300 MA FOR 429EB | 1 | ||
| 15-0009-10 | CHARGER, BATTERY 110 | 2 | ||
| 15-0009-MO | CHARGER, BATT | 2 | ||
| 15.000 Rpm, Load 45 KW, 300 Amp | Universal Generator Teststand | 1 | ||
| 150-00013 | HOLDTER, BATTERY, | 1 | ||
| 150-00024-0000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1500-000-110 | CASE PELICAN | 1 | ||
| 1500-0064-P1 | BUTTON SWITCH | 1 | ||
| 1500-052-2 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1500.00 | Axle Jack Hand Carry 5t | 1 | ||
| 15000 PSI Gauge | McDaniel Controls Inc Pressure 0 15000 PSI Gauge 316 SS Tube and socket | 1 | ||
| 15000-00 | WINGRIP 350 VACUUM ANCHOR | 1 | ||
| 15000-50 | VACUUM GAUGE | 1 | ||
| 15000001 | TOOL BOX HYDRAULIC | 1 | ||
| 15000002 | TOOL BOX HYDRAULIC | 1 | ||
| 15000003 | TOOL BOX HYDRAULIC | 1 | ||
| 1500019 | EXTENSION, DIAL GAUGE | 1 | ||
| 1500024 | 1/4DR x 3/8"AF CROW FOOT | 1 | ||
| 15000A | JIFFY 360 DEGREE DRILL ATTACHMENT | 1 | ||
| 15000GA | JIFFY 360 DEG ATTACHMENT | 1 | ||
| 15000LB | DYNAMOMETER TOOL | 1 | ||
| 15000M | LIMITED ACCESS 360 DEGREE ATTACHMENT, INTERNAL THREAD CODE A | 1 | ||
| 15000MA | LIMITED ACCESS 360 DEGREE ATTACHMENT, INTERNAL THREAD CODE A | 1 | ||
| 18-4215-0000-A1 | OXYGEN CART ADAPTER, | 1 | ||
| 18-4215-0000A2 | 4 BOTTLE CART W/ OXY BOSTR, | 1 | ||
| 18-4315-000 | CART NITROGEN (COLUMBUS JACK / REGENT MANUFACTURING) | 2 | ||
| 18-4315-0000 | CART: NITROGEN,4BOTTLE,W/BOOSTER, TILTABLE | 4 | ||
| 198-15000-30 | UNITRON POWER CART UDC 28 | 1 | ||
| 198-15000-88T | Unitron Power Systems PwrKart™ 198-15000-88T Ground Power Unit, 208 to 240 V, 380 to 480 V, 28 VDC | 2 | ||
| 200-015-0001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2015000 | Output Lead - 2m (6.5ft) - 2C x 16sqmm - 28V Aircraft Lexan Connector + SB50 | 1 | ||
| 212-92115-0001 | Calibre Flap R/H | 1 | ||
| 212-92115-0002 | Calibre Flap L/H | 1 | ||
| 212-92115-0007 | TOOL | 1 | ||
| 212-92115-0008 | GAUGE, RH INNER FLAP | 1 | ||
| 212-92150-0001 | equipo de nievelacion C-212 | 1 | ||
| 212-93015-0001 | Casa Calibration Standard, No.12, Page 3-37, Use MS20470AD4-10 rivet | 1 | ||
| 2150/00.32 | 2150/00.32;Universal Optical Adapter: ST-Type | 1 | ||
| 2150/00.50 | 2150/00.50;Universal Optical Adapter: DIN 47256-Type | 1 | ||
| 2150/00.51 | 2150/00.51;Universal Optical Adapter: FC-PC FC-APC -Type | 1 | ||
| 2150/00.58 | 2150/00.58;Universal Optical Adapter: SC-PC APC-Type | 1 | ||
| 215000.006 | AXLE JACK - MAIN GEAR | 1 | ||
| 23215-000-00 | NLG ACTUATOR LOCK SAFETY PIN | 1 | ||
| 25-911-5000 | NOSHOK GAUGE | 1 | ||
| 261-150-000-101 | VIBROMETER | 1 | ||
| 261-191-500-011 | VIBROMETER | 1 | ||
| 27-15-00013 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 27-15-00014 | SUPPORT (BLACK) | 2 | ||
| 28.14.9007.115.000 | TOOL BAG (KIT) | 1 | ||
| 28.15.8911.500.000 | LUBRICATOR IN COVER CASE (SET) | 1 | ||
| 31150000 | 3115 - ADAPTOR NEW | 1 | ||
| 31150001 | ADAPTOR | 1 | ||
| 31150001 STAH | 3115 PERĖJIMAS 1/4" STWL | 1 | ||
| 31150002 | (*disc *OBSOLETE see 31160000) - 3115/1-ADAPTOR | 1 | ||
| 31150002 STAH | 3115/1 PERĖJIMAS STWL | 1 | ||
| 321500-0501 | AIR TEST CONSOLE | 1 | ||
| 332A93315000 | LIFTING NUT | 1 | ||
| 35-92115-0001 | HERRAMIENTA CALIBRA AOA | 1 | ||
| 35-93150-0001 | DOLLY, INNER FLAPS | 1 | ||
| 355A91-1150-00 | MAIN ROTOR BLADE SLING | 1 | ||
| 355А91-1150-00 | SLING FOR LIFTING BLADES | 1 | ||
| 35M5M01150000 | TEST SET-DADC | 1 | ||
| 35M5M01150001 | TEST SET - DADC | 2 | ||
| 365A91-1150-00 | SLING MAIN ROTOR BLADE | 1 | ||
| 365A94-8150-00 | SUPPORT ARM ALIGNMENT RIG | 1 | ||
| 3M ID 61500098639 | 3M™ ROTO PEEN ASSEMBLY KIT | 1 | ||
| 40-901-5000 | 0-5000 PSI GAUGE | 1 | ||
| 40-901-5000 (GLYCERINE) | 0-5000 PSI GAUGE - GSE 30 TON JACK | 1 | ||
| 40-911-5000 | 0-5000 PSI GAUGE - GSE (LIQUID FILLED) | 1 | ||
| 40.901-5000PSI-1/4NPT | PRESSURE GAUGE | 1 | ||
| 4215000S16 | 2 POST 15K H | 1 | ||
| 43150002 | *OBSOLETE *OBSOLETE see 43153002* 10760.CV.2-2MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150003 | *OBSOLETE *OBSOLETE see 43153003* - 10760.CV.3-3MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150004 | *OBSOLETE *OBSOLETE see 43153004* 10760.CV.4-4MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150005 | *OBSOLETE *OBSOLETE see 43153005* 10760.CV.5-5MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150006 | 10760.CV.6-6MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150007 | *OBSOLETE *OBSOLETE see 43153007* 10760.CV.7-7MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150008 | *OBSOLETE see 43153008* 10760.CV.8-8MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 43150009 | 9MM HEX KEY WRENCH NICKELPLATE | 1 | ||
| 444-65315-000 | SUPPORT | 1 | ||
| 450910-7715-000 | PROTECTOR MAGNETIC | 1 | ||
| 500-181-30 0-150 0,01 | MITUTOYO | 1 | ||
| 50P9AR/215000.0060 | Axle Jack - main Gear | 1 | ||
| 5106-701-500000 | CYLINDER SUPPORT FIXTURE | 1 | ||
| 5106-701-5000000 | CYLINDER INSTALLATION TOOL FOR INSTALLATION OF CLEVIS | 1 | ||
| 536-101 0-150 0,05 | MITUTOYO | 1 | ||
| 547-3915-000 | MAINTENANCE KIT | 1 | ||
| 568-1-27015-000 | Vapour Pipe | 1 | ||
| 573-622 0-150 0,01 ±0,02 | MITUTOYO | 1 | ||
| 57331-5000 | Hand Crimp Tool | 1 | ||
| 57391-5000 | Hand Crimp Tool | 1 | ||
| 57831-5000 | Manual Terminator | 1 | ||
| 57851-5000 | 1.00/1.27mm I/O Cable Crimp Jig | 1 | ||
| 57861-5000 | 1.00/1.27mm I/O Cable Crimp Jig | 1 | ||
| 59515-0000-01 | GAGE-PLUG | 1 | ||
| 6004-215-00-00 | NLG ACCESS PLATFORM | 1 | ||
| 61-5000-3596-1 | 3M 4100 WHITE SUPER | 1 | ||
| 61-5000-9434-9 | HAND PAD | 1 | ||
| 615000-1002 | ACTUATOR ASSY | 1 | ||
| 615000AF1 | Assembly Fixture, Torque | 1 | ||
| 615000AF2 | Assembly Fixture, Spring | 1 | ||
| 615000AT1 | Assembly Tool, Shrink Sleeve | 1 | ||
| 615000AT2 | Assembly Tool, Shear Retainer | 1 | ||
| 615000AT3 | Assembly Tool, Rod End | 1 | ||
| 6201A7015000 | CYLINDER LENGHT ADJUSTING TOOL | 1 | ||
| 6206A701-5000 | CYLINDER LENGTH ADJUSTING TOOL | 1 | ||
| 64001-5000 | Hand Crimp Tool | 1 | ||
| 65001-150-000 | SUPPORT-ENGINE HANDLING CFM56-2,3,5A&5C | 1 | ||
| 65801-G550-85115-000 | Guía para el insertado auxiliar FIN | 1 | ||
| 68D150005-1005 | TRAILER AMMUNITION LOAD | 1 | ||
| 698A10001500000 | COVER | 1 | ||
| 700-1150-001 | REEL DRIVER ADJUSTMENT TOOL | 1 | ||
| 701-500000060 | Cylinder , Damper And Emergency Actuating | 1 | ||
| 7115000-E90 | GREASE PUMP | 1 | ||
| 740007015000034 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 764-1150-000 | HAND REAMER SET | 1 | ||
| 79150001 | 12005/1-SPARE PART STRAP | 1 | ||
| 81.15000-1650-00055 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 81500003 | 7311-TRANSDUCER STORAGE CASE | 1 | ||
| 81500004 | 7312-TRANSDUCER STORAGE CASE | 1 | ||
| 818271715000 | 15 BAND SAW | 1 | ||
| 826480215000 | EASY CUT 3/4 | 1 | ||
| 826486415000 | EASY CUT 1-1 | 1 | ||
| 853-115-000-0 | CLE PLATE JUPE ECROU DENT DIAM. 6S | 1 | ||
| 8708150000 | CHUCK AIR/GAS | 1 | ||
| 8811315000 | TOOL | 1 | ||
| 8811515000 | RUN ON AND RUN OFF BLOCK | 1 | ||
| 8812915000 | WAX FILLING TOOL | 1 | ||
| 8813150000 | SUPPORT | 2 | ||
| 8813150000/PHP | SUPPORT | 1 | ||
| 8813415000 | MODULE 3 PACKAGING | 1 | ||
| 8814615000 | INSPECTION TOOL | 1 | ||
| 8815815000 | FT ASSEMBLY FIXTURE | 1 | ||
| 8816515000 | SHACKLE | 1 | ||
| 8816715000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 8817015000 | BLANK | 1 | ||
| 8817415000 | GUIDE | 1 | ||
| 8819115000 | ENGINE SUPPORT MOUNT | 2 | ||
| 8819715000 | METALLIC CONTAINER ASSEMBLY FOR EXPORT | 1 | ||
| 8S13150000 | TRIPOD | 1 | ||
| 8Z10150-001-34 | DRILL GUIDE | 1 | ||
| 8Z10150-003-34 | DRILL GUIDE | 1 | ||
| 8Z10150-005-34 | DRILL GUIDE | 1 | ||
| 8Z10150-007-34 | DRILL GUIDE | 1 | ||
| 921715000 | CRAFTSMAN 15 IN LATH | 1 | ||
| 93415000 | WEARING PART - RB 1140 | 1 | ||
| 95-25915-0004 | LOWER FORWARD SKIN | 1 | ||
| 95-92015-0001 | ENGINE CONTROL RIGGING SET | 1 | ||
| 95-92015-0003 | ENGINE CONTROL RIGGING SET | 1 | ||
| 95-92115-0001 | Soporte estabilizador vertical | 1 | ||
| 95-92115-0003 | - SUPPORT, VERTICAL STABILIZER | 1 | ||
| 9560150000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 95S55070015000 | OUTIL TORQUAGE AXES FIXATION DERIVE | 1 | ||
| 95S55070015000 (CALIB) | OUTIL TORQUAGE AXES FIXATION DERIVE | 1 | ||
| 95S71003015000 | ALTERNATOR WRENCH | 1 | ||
| 96200L27150002242 | WASHER | 1 | ||
| 96200L27150002248 | SPACER | 1 | ||
| 9681815000 | O'RING SEAL | 1 | ||
| 97D53108315000 | DEVICE MILLING | 1 | ||
| 97S06000015000 | Wing Setting Tool RIB27/28 | 2 | ||
| 97S06008015000 | SET PLUMB BOBS | 1 | ||
| 984-415-000-011 | GSS CABLE | 1 | ||
| 98A08001015000 | PLUMB LINE TOOLS-ENGINE PYLON | 1 | ||
| 98A10001500000 | COVER-SLIP ON,ANGLE OF ATTACK SENSOR | 23 | ||
| 98A21001500000 | INSTALLATION POSITIONING TOOL-REFRIGERATION UNIT PACK | 2 | ||
| 98A27108015000 | STA-LOK/WERKZEUGSATA,ASA-BOLZEN STA-LOK/TOOL SET,ASA-BOLTS | 1 | ||
| 98A27207515000 | RIGGING PIN | 1 | ||
| 98A27407515000 | TROLLEY-THS ACTUATOR | 6 | ||
| 98A27408015000 | WRENCH SOCKET | 1 | ||
| 98A27501500000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 3 | ||
| 98A27501500001 | EQUIPMENT-R I FLAP POWER CONTROL UNIT | 1 | ||
| 98A27508015000 | SATZ KONTROLLDORNE LANDEKLAPPE O-STELLUNG CHECK PIN SET-FLAP NEUTRAL SETTING | 7 | ||
| 98A27608015000 | SETTING GAGE SET-ACTUATOR,ADJUSTMENT | 4 | ||
| 98A27901015000 | LOCKING BOLT | 1 | ||
| 98A29208615000 | WRENCH-R I,RAT | 1 | ||
| 98A32101500000 | SAFETY COLLAR-MLG DOOR ACTUATING CYLINDER | 12 | View Images / Tech Appraisal | |
| 98A32104150000 | EXTRACTOR-PIN-MAIN GEAR PICKUP | 2 | ||
| 98A32104150001 | EXTRACTOR - PIN - MAIN GEAR PICKUP | 7 | View Images / Tech Appraisal | |
| 98A32301015000 | EXTRACTOR-HINGE PIN-ACTUATING CYLINDER AIRCRAFT STRUCT | 6 | View Images / Tech Appraisal | |
| 98A32401500000 | RIGGING PIN - BRAKING CONTROL | 13 | View Images / Tech Appraisal | |
| 98A324015000000 | RIGGING PIN | 1 | ||
| 98A52108015000 | BALLAST | 1 | ||
| 98A52308015000 | RIGGING PIN - UDC DOOR INTERLOCK | 3 | ||
| 98A53003015000 | RIVETS INSTALLATION | 1 | ||
| 98A53803015000 | CALIBRATION-STANDARD | 1 | ||
| 98A54003015000 | GEAR - HOISTING PYLON | 1 | ||
| 98A54003115000 | SHORING-PYLONS CANTILEVER | 1 | ||
| 98A54403015000 | BROACHING KIT | 1 | ||
| 98A57103015000 | CALIBRATION STANDARD | 1 | ||
| 98A57304015000 | DOOR-DUMMY - NACA VENT | 1 | ||
| 98A71103515000 | SLING-FAN COWL | 1 | ||
| 98A76101500000 | TOOL | 1 | ||
| 98D07203015000 | JACK ADAPTOR - PYLON | 5 | ||
| 98D23075150000 | SAFETYLOCK ACT CARGO | 1 | ||
| 98D27504015000 | BOARD-FLAP RIGGING (TRACK 3) | 7 | ||
| 98D27504115000 | GAUGES-DISTANCE | 13 | ||
| 98D27804015000 | TOOL-BACKSTOP SLAT (TRACKS 5, 6, 7, AND 8) | 12 | ||
| 98D32104015000 | GUIDE CONE | 19 | ||
| 98D32104015000-A | Guide cone | 1 | ||
| 98D32104615000 | GUIDE CONE | 1 | ||
| 98D52307515000 | SAFETY LOCK-ACTUATOR,CARGO DOORS | 34 | View Images / Tech Appraisal | |
| 98D52307515000-100 | Cargo actuator door gag - A320 | 1 | ||
| 98D52307515000REP13 | HINGE | 1 | ||
| 98D53103015000 | BOX-INSTALLATION TOOL | 1 | ||
| 98D54003015000 | R I RING AT RIB 4 | 6 | ||
| 98D71203015000 | IDG R/I CRADLE (CFM) | 10 | ||
| 98F07203015000 | HOOK AUXILIARY JACK | 1 | ||
| 98F25308415000 | TOOL | 1 | ||
| 98F27207515000 | PIN - LOCKING, BELL CRANK ASSEMBLY | 19 | ||
| 98F28109015000 | TOOL | 2 | ||
| 98F32104015000 | COLLAR-SAFETY-DOOR CLG | 11 | View Images / Tech Appraisal | |
| 98F32201015000 | NLG-R I TOOL | 4 | ||
| 98F32204015000 | SAFETY COLLAR-CLG DOOR | 1 | ||
| 98F32301015000 | HOLDING TOOL-CLG DOOR | 3 | ||
| 98F54003015000 | BEAM ASSY | 1 | ||
| 98F54503015000 | TOOL-INSTALL TL PYRAMID | 1 | ||
| 98F55109015000 | SET-BUSHING REPLACEMENT | 1 | ||
| 98F57004015000 | SPANNER - FWD PINTLE | 2 | ||
| 98F57103015000 | FR47-FASTENERS EXTRAC | 5 | ||
| 98L27209015000 | ADAPTER-TURN BARREL,UPPER RUDDER | 4 | ||
| 98L29003015000 | TOOL | 1 | ||
| 98L32104015000 | STRUT-SAFETY, BLG DR FOLDED (WITHOUT OUTR DR COLLAR) | 2 | ||
| 98L52108515000 | WEIGHT-BALLAST,SLIDE RAFT MDD 1 | 1 | ||
| 98L53509015000 | PLATFORM-UPPER, LEVEL5 S19 | 2 | ||
| 98L53809015000 | Hinge Line Alingment | 1 | ||
| 98L57104015000 | TOOL | 1 | ||
| 98L57508015000 | TOOL | 1 | ||
| 98L7100H015-000 | AOC SCOOP PROTECTION | 1 | ||
| 98S27005015000 | Pitch Uncpl Syst Measuremt | 5 | ||
| 98S27005015000-REVA | PITCH UNCOUPLING MECHANISM MEASUREMENT TOOL | 1 | ||
| 98S28002515000 | Fuel Pump Installation | 13 | ||
| 98S28002515000-REVE0 | FUEL PUMP INSTALLATION TOOL | 1 | ||
| 98S28002515000260 | NEOPRENE RUBBER | 1 | ||
| 98S2800251500050 | PLEXIGLASS | 1 | ||
| 98S2800251500070 | PLEXIGLASS | 1 | ||
| 98S52305015000 | LARGE CARGO DOOR R/I FITTINGS | 1 | ||
| 98S53003015000 | DRILL BUSHING | 1 | ||
| 98S53005015000 | Skin Lap Joint Calibration | 3 | ||
| 98S53005015000-REVB | CROWN PANEL BTWN FRAME 23&29 | 1 | ||
| 98S55070015000 | TIGHTENING TOOL TORQUE | 1 | ||
| 98S55305015000 | VERTICAL STABILIZER CRADLES | 1 | ||
| 98S71003015000 | Alternator Wrench | 1 | ||
| 98S713015000 | WRENCH | 1 | ||
| 98S8002515000 | PULLER (TOOL) | 1 | ||
| 98V27508815000 | HOIST FLAP DRIVE H AND A LINK | 2 | ||
| 98V27508815000V | HOIST HOIST FLAP DRIVE H AND A LINK | 1 | ||
| 98V32104015000 | HOIST - LEG FAIRING DOOR | 4 | ||
| 98V55109015000 | LLF REPAIR TOOL-HTP | 2 | ||
| 98V57004015000 | R/I KIT, CARDAN BUSHES | 1 | ||
| 99A53107215000 | CALIBRATION STANDARD | 5 | ||
| 99A53107215000-A300 | Airbus Standard, A300 PT6 53-18-00:PG1F FIG4 - CAA+PRIMER | 1 | ||
| 99A53803015000 | REFERENCE STANDARD | 1 | ||
| 99A57103015000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-34 PAGE 405/406 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99A57204415000 | CALIBRATION STANDARD | 1 | ||
| 99A76101500000 | PIN - RIGGING | 3 | ||
| 99A761101500000 | TOOL | 1 | ||
| 99D28207315000 | A320, 28-28-03, PG617, FIG604 | 1 | ||
| 99D51103015000 | TOOL | 1 | ||
| 99D57103015000 | TOOL | 4 | ||
| 99D57204115000 | CALIBRATION STANDARD | 1 | ||
| 99F53303015000 | REFERENCE BLOCK | 2 | ||
| 99F53303115000 | STANDARD, REFERENCE | 3 | ||
| 99F54503015000 | AIRBUS REFERENCE STANDARD A330 54-54-19-991-003-A. MATERIAL: TA6V TITANIUM. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99F57103015000 | REFERENCE BLOCK | 1 | ||
| 99F57204115000 | REFERENCE STANDARD | 1 | ||
| 99L12001015000 | Electrical light : ATEX | 1 | ||
| 99L53303015000 | REFERENCE BLOCK | 1 | ||
| 99L533030150000 | Airbus Standard 53-31-10 | 1 | ||
| 99N28207315000 | CALIBRATION BLOCK | 4 | ||
| A1000150000000 | COVER - SLIP-ON, AOA SENSOR | 1 | ||
| A315-000 | BUBBLE COVER | 1 | ||
| A4907012515000 | TOOL | 1 | ||
| A7111501500060Y | POWER DOOR INTERLOCK VALVE | 1 | ||
| AC21815000 | ADAPTING ASSY | 1 | ||
| AET15000MA | LIMITED ACCESS 360DEG ATTACHME | 1 | ||
| AGE-01500-001 | BACKLASH CALCULATION SOFTWARE | 1 | ||
| AN15000LBS | DYNAMOMETRE | 1 | ||
| ARB-L21-5000 | BATTERY 21700 LI-ION FENIX | 1 | ||
| ASYK-10150-0001 | EPOCH 650 NAVY TRANSDUCER KIT | 1 | ||
| AW-98S28002515000 | BOOST PUMP TOOL | 1 | ||
| AW15000-3 | EVERGREEN WEIGH PLATFORM WHEEL WEIGHER WITH EW9150 METER. (OPT. PRINTER) | 1 | ||
| BAH150003 | SQUEEZE GRIP UTILITY KNIFE | 1 | ||
| BAH150003HSB | 12P HOOK SPARE BLADE SQZ150003 | 1 | ||
| BAH150003SBL | 12P SPARE BLADE SQZ150003 | 1 | ||
| C02181500-001-HFIX | APU INSTALLATION / REMOVAL HOISTING POINTS | 1 | ||
| CA31500-0001 ó AC970028 | Eslinga para sacar el motor del ambalaje | 1 | ||
| CA81500-0001A01 | BARRA-CARGA-RAMPA | 1 | ||
| CBR-14-3-N-1-.5000 | FINISH REAMER | 2 | ||
| CBR-16-0-N-1-5000 | FINISH REAMER | 1 | ||
| CE200615-0001 | LEAF SRING | 1 | ||
| CG9000115-0001 | TEST KIT INERTING LEAKOBSTRUCTION | 1 | ||
| CM15/000S0E0/STD | DIGITAL INDICATOR | 1 | ||
| D000-74015-000W8000-88A00 | TOOL | 1 | ||
| D218515000 | TOOL | 1 | ||
| D24515000-5 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D361-50005-000W8600-81A00 | TOOL | 1 | ||
| D8D52307515000 | TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER | 1 | ||
| DRTR010C2150003660 | JACK A/C NOSE A320 | 1 | ||
| E150-000 | CANOPY COVER | 1 | ||
| EADPD1500-01 | MIXCOAT DISPENSER PNEUMATIC F SYSTEM | 1 | ||
| EN837-1(15000PSI) | PERMASWAGE GAUGE 0-15000PSI | 1 | ||
| EN837-1/5000PSI | MANOMETER (0-5000 PSI) | 1 | ||
| ENEW15000 | TORQUE WRENCH, LOW PROFILE | 1 | ||
| ENSA01-CE001500-0301 | Util para prensa | 1 | ||
| F1150-002 | COUNTERSINK DRILL 4,76MM | 1 | ||
| F15-000 | CANOPY COVER (single seat A models) | 1 | ||
| F218515000 | TEST PRESSURE | 1 | ||
| F26515000 | TOOL | 1 | ||
| F26515000-1 | RIVETING TOOL | 3 | ||
| F26715000 | TOOL | 1 | ||
| F27115000 | TOOL INSTALLATION REMOVAL | 1 | ||
| F27415000 | TEST,SUPPORT | 1 | ||
| F27515000 | TEST-SUPPORT | 1 | ||
| F28015000 | TOOL FOR THE INSTALLATION AND REMOVAL OF THE BEARING CUPS | 1 | ||
| F28015000-1 | MLG R/I Bearing cup | 1 | ||
| F28315000 | TOOL | 1 | ||
| F3215000900000 | PIN ASSY–ECCENTRIC | 1 | ||
| F533-R1115-000W6000-01 | JIG ASSEMBLY FLOORGRID SEC 15 CENTER | 1 | ||
| F533-R1115-000W6400-01 F533-R1115-001W6400-01 | TOOL | 1 | ||
| F533-R1115-000W6400-01 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=953 | 1 | ||
| F533-R1115-000W6400-02 F533-R1115-001W6400-02 | TOOL | 1 | ||
| F533-R1115-000W6400-02 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=953 | 1 | ||
| F533-R1115-000W6400-03 F533-R1115-001W6400-03 | TOOL | 1 | ||
| F533-R1115-000W6400-03 | EBV ADAPTER SEK.15 C40 & C40.1 - LH Y=1456 | 1 | ||
| F533-R1115-000W6400-04 F533-R1115-001W6400-04 | TOOL | 1 | ||
| F533-R1115-000W6400-04 | EBV ADAPTER SEK.15 C40.2 & C53.1 - LH Y=1456 | 1 | ||
| F533-R1115-000W6400-05 F533-R1115-001W6400-05 | TOOL | 1 | ||
| F533-R1115-000W6400-06 F533-R1115-001W6400-06 | TOOL | 1 | ||
| FFL74150004 | ELEC RTR GAGE | 1 | ||
| FTE-03-35-15000-1 | PROTRACTOR INNER FLAP | 1 | ||
| FTE-04-35-15000-1 | PROTRACTOR OUTER FLAP | 1 | ||
| FTE03-35-15000-1(LH) | INNER FLAP SETTING GAUGE 2900 | 1 | ||
| FTE03-35-15000-2(RH) | INNER FLAP SETTING GAUGE 2901 | 1 | ||
| FTE04-35-15000 | OUTER FLAP SETTING GAUGE | 1 | ||
| FTE04-35-15000-1(LH) | OUTER FLAP SETTING GAUGE | 1 | ||
| FTE04-35-15000-2 | OUTER FLAP SETTING GAGE RH | 1 | ||
| FTE04-35-15000-2(RH | OUTER FLAP SETTING GAUGE | 1 | ||
| G115-000 | CANOPY COVER | 1 | ||
| G5M5M-115-00000 | DIGITAL AIR TEST SET | 1 | ||
| G5M5M0-115-0000 | TESTSET | 1 | ||
| GAUGE15000PSI | GAUGE FOR RYNGLOK TOOL RTSK8-02-008 | 1 | ||
| Gedore-015000 | Gedore 015000 TLS0022 MICRO FH BLUE - Preset Torque Screwdrivers, Range : 4-22 cN.m / 5.7-32 ozf.in | 1 | ||
| H1500000 | CART | 1 | ||
| H250T1-5000-15 | DIPSTICK | 1 | ||
| H250T1-5000-2 | HYDRAULIC TANK ASSEMBLY | 1 | ||
| HC130H0215-000 | GUIDE SET | 1 | ||
| HK15000TS | GENERATOR THREEPHASE | 2 | ||
| HLA-R-1657-1500-OBT | HP OIL HOSE DOUBLE FEMAKE NATO - ;L:1.5M | 1 | ||
| JAT15000A | JIFFY® 360° Head Attachment - Production Grade - MADE IN THE USA! | 1 | ||
| JP15000-3 | JACK POINT WEIGHING SYSTEM | 1 | ||
| K652622915000GT | TESTER, PUSH-OUT | 1 | ||
| LI80515000 | PARTITION WALLS 45X36E 150MM | 1 | ||
| LIL15000 | ENGINE CYLINDER HONE | 1 | ||
| LIN20150000N | 1-13MM HSS DRILL SET 25PC | 1 | ||
| M15-000 | CANOPY COVER, UTI model | 1 | ||
| M21815000 | SUPPORT D'ESSAI | 1 | ||
| M21915000 | TOOL | 2 | ||
| MET619150000 | 6"/150MM DS150 BENCH GRINDER | 1 | ||
| MHH-015000 | TORQUE S/D 1/4HEX 2-22CN.M | 1 | ||
| MTOO01-CE001500-0001 | UTIL MONTAR WARPING TREES DEL SAS | 1 | ||
| N98000D12000015000 | APU COMPLEMENTARY OIL TOOL | 1 | ||
| OED15000 | ARM, TOWING | 1 | ||
| P1500075 | SEALANT REMOVAL TOOL | 1 | ||
| P1500076 | SEALANT REMOVAL TOOL | 1 | ||
| P3BR-92015-0001 | Scissor lift dolly | 1 | ||
| PT-EXP-12500TO15000 | PT-EXP-12500TO15000;Expand PT-Server-12500 to PT-Server-15000 Software | 1 | ||
| PT-EXP-15000TO20000 | PT-EXP-15000TO20000;Expand PT-Server-15000 to PT-Server-20000 Software | 1 | ||
| PT-SERVER-15000 | PT-SERVER-15000;PathTrak Server License for up to 15000 Ports | 1 | ||
| PYT1500005 | D RING .5X2.25IN NONCOND 10PK | 1 | ||
| PYT1500009 | D RING ATTACH W/LOOP 10PK | 1 | ||
| PYT1500010 | DRING MICRO ATTACH W/ADHE 10PK | 1 | ||
| PYT1500018 | 80LB TOOL CINCH 10 PACK | 1 | ||
| PYT1500019 | SHRINK LINK 0.75X1.75IN 25PK | 1 | ||
| PYT1500021 | SHRINK LINK 1.5INX2IN 25PK | 1 | ||
| PYT1500022 | SHRINK LINK 2INX4IN 10PK | 1 | ||
| PYT1500027 | QUICK SPIN ADAPT SM 10PACK | 1 | ||
| PYT1500028 | QUICK SPIN ADAPT M 10PACK | 1 | ||
| PYT1500029 | QUICK SPIN ADAPT LARGE 10PACK | 1 | ||
| PYT1500030 | QUICK SPIN ADAPT XL 10PACK | 1 | ||
| PYT1500031 | QUICK SPIN ADAPT PEN HOLD 10PK | 1 | ||
| PYT1500032 | QUICK ADAPT PEN HOLD COIL 10PK | 1 | ||
| PYT1500033 | QUICK SPIN ADAPT PERM MARK 10P | 1 | ||
| PYT1500051 | HOOK2LOOP EXT 1 X 72IN HVY DTY | 1 | ||
| PYT1500052 | HOOK2RAIL EXT 1 X 72 HVY DUTY | 1 | ||
| PYT1500053 | DBL TRIG EXT .05 X 12 IN | 1 | ||
| PYT1500065 | HOOK2QUIK RNG COIL 2/TAIL | 1 | ||
| PYT1500069 | 52IN STEEL RETRACTOR | 1 | ||
| PYT1500088 | ADJUSTABLE RADIO HOLSTER | 1 | ||
| PYT1500089 | ADJ RADIO HLSTER CLP2LOOP COIL | 1 | ||
| PYT1500090 | CORDLESS TOOL BATTERY HOLSTER | 1 | ||
| PYT1500093 | HAMMER HOLSTER BELT | 1 | ||
| PYT1500095 | HOLSTER POUCH BELT W/RETRACTOR | 1 | ||
| PYT1500096 | SCAFF WR HOLSTER BELT W/RETRTR | 1 | ||
| PYT1500098 | TAPE MEASUR HLSTR BLT W/RETRTR | 1 | ||
| R150-000 | CANOPY COVER | 1 | ||
| R5705601500000 | TOOL-CHECKING | 1 | ||
| RBW1500019 | Extension | 2 | ||
| RV15-000 | CANOPY COVER, over top type | 1 | ||
| S16-0620-150000 | BONDING FIXTURE | 1 | ||
| S16-0621-150000 | BONDING FIXTURE | 1 | ||
| S254151150000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S3S21015000 | M00 TRANSPORTATION CONTAINER | 1 | ||
| SG 8813150000 | TRIPOD SUPPORT | 1 | ||
| SHC-I-150-0,01 | CALIPER | 1 | ||
| SL90-313-1.5000 | INSTALL TOOL | 2 | ||
| SL90-314-1-5000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK | 1 | ||
| SL90-315-1.5000 | INSTALL TOOL | 2 | ||
| SL90-321-5000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 2 | ||
| SL90-374-1.5000 | INSTALL TOOL | 1 | ||
| SPD70150-001-041 | SHIPPING AND STORA | 1 | ||
| SQZ150003 | UNIVERSAL KNIFE | 1 | ||
| SQZ150003-SBL | SPARE BLADE BOX | 1 | ||
| T792997115000000 | TOOL | 1 | ||
| TE515-000-00-10 | PDU TEST SYSTEM (TE515-000-00-100) | 1 | ||
| TF1155-150-00 | HOSE SUPPLY CPU 2IN, | 1 | ||
| TMH CR15-00-00 | AXLE JACK - 60 TON | 2 | ||
| TMH GA15-00-00 | Mobile Fluid Rig (MAX 3000 PSI) | 1 | ||
| TMHCP15-00-00 | MLG JACK | 1 | ||
| U15-000 | CANOPY COVER | 1 | ||
| U21915000 | SPECIFIC TOOL | 1 | ||
| VG-015-00-00 | GAST VACUUM GENERATOR, ET-15HS, SUPPLIER PART # GA33022 | 1 | ||
| WB.15000WAPB | WORKBENCH FACOM 1.5MX0.75M | 1 | ||
| WERA05028150001 | 391 NUTSPINNER FLEX 7.0 X 167M | 1 | ||
| WS7130150000 | BALL VLV BP15/100/1 | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
