| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 14000 | Dynabrade® Dynafile (Screw size: (1/8" to 1/2") x 24") (Rpm (no load): 20000) (Overall length: 14-5/8" (371 mm)) (Add to cart: Add To Cart) | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 01-1400-00 | TOOL | 1 | ||
| (CALIB) 01-1400-00-230 | ARINC 429/CSDB DATABUS (CALIBRATION) | 2 | ||
| (CALIB) 35M5M01140001 | TEST DEVICE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 9501501-4000 | VACUUM TOILET-LEAK TESTER (CALIBRATION) | 1 | ||
| (CALIB) 98A52207614000 | BALLAST BALLAST WEIGHT - EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27504014000 | BOARD BOARD-FLAP RIGGING (TRACK 2) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27504114000 | SETTING GAUGE, SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53103014000 | TEMPLATE TEMPLATE,CUTTING-ANTENNA C.14-1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D57004014000 | HOOK-COVER (RIB2-SURGE DOORS) (CALIBRATION) | 1 | ||
| (CALIB) 98D71203014000 | TORQUE WRENCH SET CFM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32301014000 | EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27004014000 | STRUT STRUT - SUPPORT, SPOILER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L53809014000 | SAFETY SUPPORT-S19.1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L71003014000 | LIFTING BEAM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S27005014000 | FLAP JACK LOCKING TOOL | 1 | ||
| (CALIB) 98S52305014000 | FWD RH DOOR LEAKAGE TEST TOOL | 1 | ||
| 00110614000 | ADAPTER-UNILUG SEE REMARKS | 1 | ||
| 0014274A1400000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 00154-014-000 | SCREW PLUG | 1 | ||
| 001U274A1400000 | SPECIAL TOOL | 1 | ||
| 00404-140-000 | PRESSURE SPRING | 1 | ||
| 00407-014-000 | SPRING STEEL CLAMP | 1 | ||
| 00433-814-000 | ANGLED ELBOW COUPLIN | 1 | ||
| 00489-214-000 | NON-RETURN VALVE | 1 | ||
| 00510-214-000 | HOOK WRENCH | 1 | ||
| 01-0514-0000 | Head, Fokker F-27 (Ce) | 1 | ||
| 01-0714-0000 | TOWBAR: MULTI-HD, BOEING 737-100/900 | 2 | ||
| 01-1400-00 | TESTER, DATA BUS | 3 | ||
| 01-1400-00-115 | ARINC 429/CSDB DATABUS | 1 | ||
| 01-1400-00-115/S | ARINC 429/CSDB Databus Analyzer (115 VAC) | 1 | ||
| 01-1400-00-230 | ARINC 429/CSDB DATABUS | 1 | ||
| 01-1400-00-230/S | ARINC 429/CSDB DATABUS ANALYZER (230 VAC) | 1 | ||
| 01-1400-00/DT200 | ARINC 429/CSDB DATABUS ANALYZER DATATRAC 200 | 1 | ||
| 01-1400-00/DT400 | TESTER, DATA BUS | 1 | ||
| 01-914-000 | 1/10A OPTICAL FLAT, FUSED SILICA, 2" DIA | 1 | ||
| 01140006 | 402.6-1/4DR X 6MM UNIFLEX BI-HEX SKT | 1 | ||
| 01140007 | 402.7-1/4DR x 7mm UNIFLEX BI-HEX SKT | 1 | ||
| 01140008 | 402.8-1/4DR x 8mm UNIFLEX BI-HEX SKT | 1 | ||
| 01140009 | 402.9-1/4DR x 9mm UNIFLEX BI-HEX SKT | 1 | ||
| 0140004010 | HAND TAP VF1699 | 1 | ||
| 01400040104 | TAP | 1 | ||
| 01400040104/10 | HAND TAP | 1 | ||
| 024314-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 03-5814-0000 | STAND, WING DORNIER 328 | 1 | ||
| 0311400090 | SHOULDERED LUG | 1 | ||
| 040-9501501-4000 | INDICATOR UNIT | 1 | ||
| 042-9501501-4000 | TEST PLUG A330/340 | 1 | ||
| 044-9501501-4000 | TEST PLUG A300/310, A319/320/321 | 1 | ||
| 046-9501501-4000 | CONNECTION ASSEMBLY A330/340 | 1 | ||
| 08-0121-4000 | Engine Stand & Slings | 1 | ||
| 08-0141-4000 | SLING, ENG TFE-731-20R-1B (CE) | 4 | ||
| 08-0701-4000 | Tool, Span Wrench | 1 | ||
| 08-2014-0000 | ENGINE TRANSPORT STA | 9 | ||
| 093314-000 | SOCKET 17MM | 2 | ||
| 1014-00-0005-ENC | 1014-00-0005-ENC;UNIVERSAL ATE CND PRODUCTS LEVEL 1 | 1 | ||
| 1014.00.0000.00 | JACK TRIPOD, NOSE FUSELAGE | 1 | ||
| 110614000 | ADAPTER-UNILUG SEE REMARKS | 1 | ||
| 1140000 | DATA BUS READE | 1 | ||
| 1140006 | 1/4DR x 6mm UNIFLEX BI-HEX SKT | 1 | ||
| 1140007 | 1/4DR x 7mm UNIFLEX BI-HEX SKT | 1 | ||
| 1140008 | 1/4DR x 8mm UNIFLEX BI-HEX SKT | 1 | ||
| 1140009 | 1/4DR x 9mm UNIFLEX BI-HEX SKT | 1 | ||
| 12140000 | 445-3/8" RATCHET ADAPTOR | 1 | ||
| 122680140000 | OPTICAL HARNESS | 1 | ||
| 131.4000 | UAS-UNIVERSAL ASSEMBLY AND DISASSEMBLY STAND | 1 | ||
| 13140000 | 522-1/2" RATCHET ADAPTOR/INLINE RA | 1 | ||
| 14-6821-4000 | TOOLKIT: W, | 1 | ||
| 140-000 | CANOPY COVER, Wrap-Around (fabric wing models) | 1 | ||
| 140-001 | TEST GAUGE | 1 | ||
| 140-002 | CANOPY COVER, Wrap-Around, 140A models | 1 | ||
| 140-003 | GAUGE, 5.000 PSI, 8 1/2" DIA | 1 | ||
| 140-005 | GAUGE, 1500 PSI, 8 1/2"DIA. | 1 | ||
| 1400-001-240 | CASE PELICAN | 1 | ||
| 1400-030 | SOFTWARE FOR CEI VER 201 | 1 | ||
| 14000-001 | MARATHON SHORT OUT RESISTOR | 2 | ||
| 1400040104 | HAND TAP | 1 | ||
| 140005-1 | SPANNER SOCKET | 1 | ||
| 140007-RFX | SCALE, WEIGHING | 1 | ||
| 14Y0140-001 | TRU, WELDING TOOL GDC 100 | 1 | ||
| 15140000 | 563-3/4" RATCHET ADAPTOR (44 TEETH | 1 | ||
| 20130626102914-0001 | TOOL | 1 | ||
| 2014/00.09 | 2014/00.09; FC Type NTT.D3 | 1 | ||
| 201400005 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 201400006 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 212-93014-0001 | Casa Calibration Standard, No.11, Page 3-31, FE-PL-52SN = 4130 Steel, L3149-T42 = 2024-T4 | 1 | ||
| 214-000 | COCKPIT/CANOPY/NOSE COVER | 1 | ||
| 2311400080 | SECTOR | 1 | ||
| 261-191-400-011 | VIBROMETER | 1 | ||
| 290-9501501-4000 | TEST TUBE | 1 | ||
| 300-9501501-4000 | POMP, VACUUM | 1 | ||
| 3001-1400-00 | 3001-1400-00 | 1 | ||
| 3005A1400-01 | SEAL-INSTALLATION TOOL | 1 | ||
| 3014000F116 | SLEEVE SET ASSY, TOOL | 1 | ||
| 31M14000 | FIXTURE | 1 | ||
| 32A76015-14000 | SUITCASE | 2 | ||
| 3314000 | AIR-HYD | 1 | ||
| 341A35014000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 35-92114-0001 | FLIGHT CONTROLS LOCKING TOOL KIT | 2 | ||
| 35-92140-0001 | distanciador | 1 | ||
| 35-92140-0003 | DISTANCIADOR | 1 | ||
| 35-92214-0001 | ADAPTER RH, JACKING REAR FUSELAGE | 1 | ||
| 351-4000-22GSE | CENTERBODY/NOZZLE PROTECTIVE RUG | 2 | ||
| 351-4000-22GSE-SP | TOOL | 1 | ||
| 351-4000-23GSE | EXHAUST COVER | 2 | ||
| 351-4000-24GSE | EXHAUST DOLLY | 1 | ||
| 355A93-3140-00/PHP | EXTRACTOR MRH BALL JOINT | 1 | ||
| 355A93314000 | EXTRACTOR MRH BALL JOINT | 1 | ||
| 355M03214000 | EXTENSION CABLE LOOM | 1 | ||
| 357-9314-000 | CONNECTOR ADAPTER | 1 | ||
| 35M5M01140000 | TEST SET-THRUST REVERSER MICROSWITCH | 1 | ||
| 35M5M01140001 | TEST SET - THRUST REVERSER MICROSWITCH | 1 | ||
| 365A91-4140-00/PHP | PAD JACKING NOSE L/G | 1 | ||
| 365A91414000 | PED,JACKING MAIN L/G | 2 | ||
| 365A92414000 | PAD JACKING NOSE L/G | 1 | ||
| 365A96-1140-00 | MRB CONTAINER FOR 4BLADES (WOOD) | 1 | ||
| 414-000 | CANOPY COVER | 1 | ||
| 41851140000/10 | M14 HELICOIL PLUS REPAIR KIT | 1 | ||
| 424-0314-000 | CORD POWER | 1 | ||
| 4421214-000 | CHARGE VALVE ASSY | 1 | ||
| 444-65014-000 | SUPPORT | 1 | ||
| 444-65214-000 | WRENCH | 1 | ||
| 5000-0014-0008 | M-SYSTEM MK 8 CHANNELS | 1 | ||
| 5140-00-357-5463 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 5140-00-473-6256 | BAG, TOOL | 1 | ||
| 547-3914-000 | TEST HARNESS | 1 | ||
| 568-2-26714-000 | Plate | 1 | ||
| 58214-0001 | SEAL GUIDE | 1 | ||
| 58214-0001PM | SEAL GUIDE (58214-0001) | 1 | ||
| 58214-0002 | SEAL GUIDE | 1 | ||
| 58214-0002PM | SEAL GUIDE (58214-0002) | 1 | ||
| 6101C14000G20 6101C14-A | TOOL | 1 | ||
| 65000F32140002000 | DISPOSITIF DE LIMITATION GONFL AMORT TPX | 1 | ||
| 686-5014-000 | TEST BENCH | 1 | ||
| 7-10140-001 | FLEXIBLE ENDOSCOPE | 2 | ||
| 7-63140-002 | FLEXIBLE ENDOSCOPE | 1 | ||
| 701-3114000 | ACTUATOR | 1 | ||
| 70140001 | 10940.55-RUBBER COMPOSITION HAMMER | 1 | ||
| 70140002 | 10940.65-RUBBER COMPOSITION HAMMER | 1 | ||
| 70140003 | 10940.75-RUBBER COMPOSITION HAMMER | 1 | ||
| 70140004 | 10940.90-RUBBER COMPOSITION HAMMER | 1 | ||
| 71214-00039 | AVDEL PNEUMATIC GUN TOOL | 1 | ||
| 74140000 | 11068-PISTON RING COMPRESSORS | 1 | ||
| 74140001 | 11068.1-PISTON RING COMPRESSOR SIZE 1 | 1 | ||
| 74140003 | 11068.2-PISTON RING COMPRESSOR SIZE 2 | 1 | ||
| 74140005 | 11068.3-PISTON RING COMPRESSOR SIZE 3 | 1 | ||
| 786A1400-01 | Tube Transfer | 1 | ||
| 80Y0114000 | EN-OUTGE TDS | 1 | ||
| 813914-000 | HEAT GUN | 1 | ||
| 814000_100 | ADJUSTABLE WRENCH | 1 | ||
| 826480214000 | EASY CUT 3/4 | 1 | ||
| 826483314000 | EASY CUT 1IN | 1 | ||
| 826486414000 | EASY CUT 1-1 | 1 | ||
| 846-914-000-1 | Engine Tool | 1 | ||
| 8811514000 | RUN ON AND RUN OFF BLOCK | 1 | ||
| 8812914000 | WAX FI/LINA TOOL | 1 | ||
| 8813414000 | MODULE 2 PACKAGING | 1 | ||
| 8814 214 000/PHP | EXTRACTOR | 1 | ||
| 8814214000 | EXTRACTOR | 1 | ||
| 8816514000 | PROTECTOR | 1 | ||
| 8816714000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 8817314000 | MEASURING TOOL | 1 | ||
| 8817414000 | WRENCH | 1 | ||
| 8817514000 | ENDOSCOPE GUIDES | 1 | ||
| 8818314000 | BOX CASE | 1 | ||
| 8819 114 000/PHP | ARRIEL2C ENG SUPPORT MOUNT | 1 | ||
| 8819114000 | ENGINE CRADDLE | 1 | ||
| 8AT-9114-000 | TORQUE M/R BLADE | 1 | ||
| 9002-01-4000-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 900660014000 | DRILL 54 TAPER LENGTH TYPE | 1 | ||
| 901400-01 | ASSY FIRE DETECTION-RH-ZONE 1 | 1 | ||
| 91-4140-00 | JACKING SUPPORT MAIN LANDING GEAR | 1 | ||
| 9202-01-4000-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 95-92014-0003 | KIT DE NIVELACION | 1 | ||
| 95-92114-0001 | Dolly, Elevator and Rudder | 1 | ||
| 95-93014-0001 | Tool | 1 | ||
| 9501-4000-17 | DELASTEK TEST SET | 1 | ||
| 95011501-4000 | TOOLING: VACUUM TOILET LEAK TESTER | 1 | ||
| 9501501-4000 | VACUUM TOILET-LEAK TESTER | 22 | ||
| 950501-4000 | VACUUM, TOILET SEAT TESTER | 1 | ||
| 97A21102140000 | PLUGS DRAIN-MAST | 1 | ||
| 97F12001014000 | ENGINE OIL FILLING BENCH | 1 | ||
| 97F2441014000 | 400 Hz Generation bench CABIN | 1 | ||
| 97F27207514000 | PIN RIGGING | 1 | ||
| 97S06000014000 | Theodolite Wing Sup Assy | 1 | ||
| 97S06000140000 | TOOL | 1 | ||
| 98000A25001014000 | Loader | 1 | ||
| 98000F12001014000 | Banc huile moteurMechanism Ramp Door | 1 | ||
| 98A08001014000 | ADAPTOR-PLUMB BOB SET | 1 | ||
| 98A27108014000 | PIN - RIGGING, AILERON DRUM | 8 | View Images / Tech Appraisal | |
| 98A2710814000 | TOOL | 1 | ||
| 98A27208514000 | RUDDER FIXTURE - VERTICAL STABILIZER | 1 | ||
| 98A27407514000 | FIXTURE STRUT HORIZONTAL STABILIZER | 2 | ||
| 98A27408014000 | WRENCH SOCKET | 2 | View Images / Tech Appraisal | |
| 98A27504014000 | EXTRACTOR SET-ROLLER SPIGOT PLATES-FLAP REAR TRACKS | 4 | View Images / Tech Appraisal | |
| 98A27601014000 | EQUIPMENT-ADJUSTING,SPOILER AND SPEEDBRAKE SERVO CONTR | 3 | ||
| 98A27604014000 | EXTRACTOR SHAFT SPOILER | 3 | ||
| 98A27608014000 | SAFETY COLLAR SET | 1 | ||
| 98A27901014000 | PIN-RIGGING,NOSE GEAR EMERGENCY LOWERING CONTROL | 7 | View Images / Tech Appraisal | |
| 98A28104014000 | BLANK ADAPTER ASSEMBLY | 1 | ||
| 98A32301014000 | RIGGING PIN | 1 | View Images / Tech Appraisal | |
| 98A52108014000 | BALLAST | 1 | ||
| 98A52207614000 | BALLAST WEIGHT - EMERGENCY EXIT, RH | 2 | ||
| 98A52308014000 | RIGGING PIN SET - UDC DOOR SAFETY MECHANISM | 3 | ||
| 98A53003014000 | INSTALLATION,GPS ANTENNA | 1 | ||
| 98A53009014000 | INSTALLATION, GPS AN | 1 | ||
| 98A53803014000 | CALIBRATION-STANDARD | 1 | ||
| 98A54003014000 | TOOL-BEAM HOISTING ASSY | 1 | ||
| 98A54003114000 | R I GE-PYLON TOOL | 1 | ||
| 98A54403014000 | FWD SHACKLE RL RG R18 | 1 | ||
| 98A57304014000 | DOOR-DUMMY - NACA VENT | 1 | ||
| 98A71103514000 | FAN CORE COWL-PIN LOC | 1 | ||
| 98D27303014000 | TEST TOOL-SIDE STICK CHECKING | 1 | ||
| 98D27309014000 | NEUTRAL SET ELEVATOR ACT | 1 | ||
| 98D27504014000 | BOARD-FLAP RIGGING (TRACK 2) | 11 | View Images / Tech Appraisal | |
| 98D27504014000-104 | L ALU 6063-1X11/2X1/8X151.969LG PRICE PER FT | 1 | ||
| 98D27504114000 | GAUGES-DISTANCE | 13 | ||
| 98D27804014000 | TOOL-BACKSTOP SLAT (TRACKS 1, 2, 3, AND 4) | 12 | ||
| 98D29207514000 | PROTECTIVE EQUPT. | 1 | ||
| 98D29307514000 | SUPPORT | 1 | ||
| 98D32104014000 | GUIDE CONE | 20 | View Images / Tech Appraisal | |
| 98D32104014000-A | Guide cone | 1 | ||
| 98D53103014000 | TEMPLATE,CUTTING-ANTENNA C.14-15 | 2 | ||
| 98D54003014000 | TOOL | 1 | ||
| 98D57004014000 | HOOK-COVER (RIB2-SURGE DOORS) | 25 | View Images / Tech Appraisal | |
| 98D7110H014-000 | SLING,FAN COWLL | 1 | ||
| 98D71203014000 | TORQUE WRENCH SET CFM | 11 | ||
| 98D7203014000 | TOOL | 1 | ||
| 98F07203014000 | TOOL | 1 | ||
| 98F12001014000 | Banc huile moteurMechanism Ramp Door | 1 | ||
| 98F26208414000 | DEVICE,BATTERY REMOVAL INSTALLATION | 1 | ||
| 98F27207514000 | PIN - LOCKING, BELL CRANK ASSEMBLY ACTUATOR | 13 | ||
| 98F28109014000 | TOOL | 1 | ||
| 98F29001014000 | MANIFOLD-LP HYDRAULIC | 1 | ||
| 98F32301014000 | EXTRACTOR-PINTLE/PINS CLG | 5 | ||
| 98F52108214000 | BALLAST WEIGHT EMERGENCY DOOR | 1 | ||
| 98F57004014000 | WING CRADLE SET(A340) | 1 | ||
| 98F57103014000 | WBI - FR47 STRAPS | 1 | ||
| 98K7830H014-000 | HOLD OPEN ROD FOR TR AT 35 DEGREES | 1 | ||
| 98L10108714000 | COVER-INTAKE HHX | 2 | ||
| 98L27004014000 | STRUT - SUPPORT, SPOILER | 3 | ||
| 98L29003014000 | TOOL | 1 | ||
| 98L32104014000 | TOOL-SAFETY | 5 | ||
| 98L53509014000 | PLATFORM-UPPER, LEVEL4 S19 | 2 | ||
| 98L53809014000 | SAFETYSUPPORT-S19.1 | 1 | ||
| 98L57004014000 | R/I TOOL ACTUATOR BUSHES | 1 | ||
| 98L57008614000 | RAILSYSTEM - R/I, TRACK 1 | 1 | ||
| 98L57103014000 | TOOL | 1 | ||
| 98L57104014000 | TOOL | 1 | ||
| 98L7810H014-000 | PROTECTION TOOL-FINGER SEAL | 1 | ||
| 98L7830H014-000 | DUMMY, TR CASCADE | 1 | ||
| 98N7830H014-000 | THRUST REVERSER HINGE BOLT BULLET | 1 | ||
| 98NSA506314000 | WRENCH-HOOK,ADAPTER | 5 | View Images / Tech Appraisal | |
| 98NSA506414000 | TOOL-R I,NSA5064-14 | 1 | ||
| 98NSAS06314000 | GROVE NUT WRENCH | 1 | ||
| 98S27005014000 | Safety Wing Flap Actuator | 3 | ||
| 98S27005014000-REVA | SAFETY WING FLAP ACTUATOR | 1 | ||
| 98S52305014000 | Fwd RH Door Leak Test Tool | 2 | ||
| 98S53003014000 | DRILL BUSHING | 1 | ||
| 98S53005014-000A | Calibration Standard, ATR42 PT4 53-56-52:PG406 FIG402 SHT2 | 1 | ||
| 98S53005014-000B | Calibration Standard, ATR42 PT4 53-56-52:PG407 FIG402 SHT3 | 1 | ||
| 98S53005014-000C | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | ||
| 98S53005014-000D | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | ||
| 98S53005014000 | Skin Lap Joint Calibration | 3 | ||
| 98S57105014000 | Fr Spar RIB10/12 Sealing | 2 | ||
| 98S57205014000 | DRILLING | 1 | ||
| 98S71003014000 | WRENCH | 1 | ||
| 98S713014000 | WRENCH | 1 | ||
| 98V07203014000 | ADAPTOR LOAD CELL | 1 | ||
| 98V53509014000 | BH PLATFORM-S19 | 1 | ||
| 98V57508814000 | SUPPORT FLAP LEVER 1-4 | 1 | ||
| 98V71003014000 | TOOL | 1 | ||
| 9938140009 | NUT | 1 | ||
| 99A53803014000 | REFERENCE STANDARD | 1 | ||
| 99D51103014000 | TOOL | 1 | ||
| 99D57103014000 | REFERENCE STANDARD | 5 | ||
| 99D57204014000 | REFERENCE STANDARD | 1 | ||
| 99D57204114000 | CALIBRATION STANDARD | 1 | ||
| 99F53207314000 | AIRBUS CALIBRATION STANDARD A330 PART 6 53-21-36 PAGE 637 FIGURE 620. Includes Test Report and Certificate of Conformance. | 2 | ||
| 99F53303014000 | REFERENCE STANDARD | 1 | ||
| 99F54503014000 | delay line | 1 | ||
| 99F57103014000 | TOOL | 1 | ||
| 99F57204114000 | REFERENCE STANDARD | 1 | ||
| 99F57204140000 | AIRBUS REFERENCE STANDARD A330 Part 6 57-20-02 Page 604 Figure 603. Material: 2024-T351. Includes Test Report and Certificate of Conformance. | 2 | ||
| A1-14-0001-002 | FILAMENT | 3 | ||
| A140004 | JACK 300 KN | 1 | ||
| A32091-4000 | HOLE SAW | 1 | ||
| AC21814000 | ADAPTING ASSY | 1 | ||
| APV7114-00-0 | FAN COWL HOR STICK iss A | 1 | ||
| APV7114-00-0 REV A | FAN COWL HOR STICK | 1 | ||
| ATI14000 | DYNAFILE | 1 | ||
| BS1902100140000 | KIT | 1 | ||
| BUT-SM14000 | USE BUT SMI4500 | 1 | ||
| C114-000 | CANOPY COVER | 1 | ||
| CBR-12-1-N-1-.4000 | TOOL | 1 | ||
| CC670-14000TFIX101 | INBOARD CONTOUR FLAP RIGGING (LH) | 1 | ||
| CC670-14000TFIX102 | INBOARD CONTOUR FLAP RIGGING (RH) | 1 | ||
| CGAB 1400-00 | INTERCONNECTING CABLE FOR CGAB 1400 | 1 | ||
| CPN792-6140-001 | COUPLER TEST UNIT | 1 | ||
| D14000100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| DAPT60-0140-00 | EXTRACTOR-BALL | 8 | ||
| DAPT60-0140-00-IAS | EXTRACTOR - BALL | 1 | ||
| DPTR010C2140003500 | TOOL | 1 | ||
| DY14000 | DYNAFILE 1, ABRASIVE BELT TOOL | 1 | ||
| E23140-005 | TEST CABLE | 1 | ||
| E925140000 | TOOL | 1 | ||
| EN837-1/4000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| F1400055 | END-FITTING | 1 | ||
| F26714000 | TOOL | 1 | ||
| F27114000 | TOOL REMOVAL | 1 | ||
| F28014000 | Brake assembly tool | 1 | ||
| F28140000 | TOOL | 1 | ||
| F28214000 | TOOL | 1 | ||
| FK14-000 | CANOPY COVER | 1 | ||
| FTE-01-35-14000 | AILERON SETTING GAGE STA.3860 | 1 | ||
| FTE-01-35-14000 1/2 | PROTRACTOR AILERON TRIM TAB – CN235 | 1 | ||
| FTE-02-35-14000 | AILERON SETTING GAGE STA.7500 | 1 | ||
| FTE-02-35-14000 CN235 | PROTRACTOR AILERON | 1 | ||
| FTE-02-35-14000 TAB-CN235 | PROTRACTOR AILERON SERVO TAB - CN235 | 1 | ||
| FTE-03-35-14000 | AILERON SETTING GAGE STA.5660 | 1 | ||
| FTE01-35-14000-1(LH) | AILERON SETTING GAUGE .STA.3860 | 1 | ||
| FTE01-35-14000-2(RH) | AILERON SETTING GAUGE .STA.3861 | 1 | ||
| FTE02-35-14000-1(LH) | AILERON SETTING GAUGE | 1 | ||
| FTE02-35-14000-2(RH) | AILERON SETTING GAUGE | 1 | ||
| FTE03-35-14000-1(LH) | AILERON SETTING GAUGE | 1 | ||
| G25140001000 | KNOB | 1 | ||
| G698-3140002-101 | Tss?4100 Data Loader Patch Harness | 1 | ||
| G698−3140002−109 | TSS−4100 Data Loader Patch Harness | 2 | ||
| G6983140001−101 | Data Loader Patch Harness | 1 | ||
| GB314-00-0001-01 | GENERAL - REWORK OF THE HOIST TROLLEY (GSE 249) | 1 | ||
| GS14000 | TOOL | 1 | ||
| GS14000-1 | SEAL REMOVER AND INSTALLER | 2 | ||
| GSB2714000 | SPACER FOR SPOILER TENSION REGULATOR | 3 | ||
| HC 130H0014-000 | NOSE LANDING GEAR PINTLE TOOL | 1 | ||
| HC132H0140-000 | LINK/ MLG SUPPORT CHAIN | 1 | ||
| HP14-000 | CANOPY/NOSE COVER, all year use | 1 | ||
| HTE1400-001 | PACKING-PERFORMED | 1 | ||
| HU55281-4-00-041 | STAND CRADLE FITTING | 1 | ||
| IAE1M14000 | FIXTURE LIFTING LPT | 3 | ||
| KL0014-0002 | SPINDLE | 1 | ||
| KL0014-0004 | DRIVE NUT 24MM | 1 | ||
| KL0014-0005 | DRIVER | 1 | ||
| LF201-4000 | GAUGE | 1 | ||
| M314-000 | CANOPY COVER | 1 | ||
| MTOO14-CE201140-0001 | Util montar cir-clip | 1 | ||
| MTOO19-CE201140-000 | Util prensa | 1 | ||
| MUTL-C14000-M100-MFA | MUTL-C14000-M100-MFA;UTILITY CASSETTE WITH SPLITTER 4X10/90 SMF FC/APC | 1 | ||
| MUTL-C14000-M100-MFP | MUTL-C14000-M100-MFP;UTILITY CASSETTE WITH SPLITTER 4X10/90 SMF FC/PC | 1 | ||
| MUTL-C14000-M100-MLC | MUTL-C14000-M100-MLC;UTILITY CASSETTE WITH SPLITTER 4X10/90 SMF LC/PC | 1 | ||
| MUTL-C14000-M100-MLU | MUTL-C14000-M100-MLU;UTILITY CASSETTE WITH SPLITTER 4X10/90 SMF LC/APC | 1 | ||
| MUTL-C14000-M100-MSC | MUTL-C14000-M100-MSC;UTILITY CASSETTE WITH SPLITTER 4X10/90 SMF SC/PC | 1 | ||
| MUTL-C14000-M100-MSU | MUTL-C14000-M100-MSU;UTILITY CASSETTE WITH SPLITTER 4X10/90 SMF SC/APC | 1 | ||
| MUTL-C14000-M101-MFA | MUTL-C14000-M101-MFA;UTILITY CASSETTE WITH SPLITTER 4X10/90 50UM MMF FC/APC | 1 | ||
| MUTL-C14000-M101-MFP | MUTL-C14000-M101-MFP;UTILITY CASSETTE WITH SPLITTER 4X10/90 50UM MMF FC/PC | 1 | ||
| MUTL-C14000-M101-MLC | MUTL-C14000-M101-MLC;UTILITY CASSETTE WITH SPLITTER 4X10/90 50UM MMF LC/PC | 1 | ||
| MUTL-C14000-M101-MLU | MUTL-C14000-M101-MLU;UTILITY CASSETTE WITH SPLITTER 4X10/90 50UM MMF LC/APC | 1 | ||
| MUTL-C14000-M101-MSC | MUTL-C14000-M101-MSC;UTILITY CASSETTE WITH SPLITTER 4X10/90 50UM MMF SC/PC | 1 | ||
| MUTL-C14000-M101-MSU | MUTL-C14000-M101-MSU;UTILITY CASSETTE WITH SPLITTER 4X10/90 50UM MMF SC/APC | 1 | ||
| MYTB757NB140001 | DISK OQAR CONFIG | 1 | ||
| N4140000 | SPECIFIC FILM; FOR VIDEOSCOPE; OLYMPUS | 1 | ||
| NP60-0140-00 | BALL EXTRACTOR GEAR | 1 | ||
| PA14-000 | CANOPY COVER, over top type | 1 | ||
| PWC32514-0005 | EYE ASSY(REF.SLING-R | 1 | ||
| R114-000 | CANOPY COVER, BELLY STRAP TYPE | 1 | ||
| RS914-0006 | ANEMOMETER 40M/S MAX AIR VELO | 1 | ||
| RV14-000 | CANOPY COVER | 1 | ||
| SM14-000 | CANOPY COVER | 1 | ||
| SP3314000 | COOLANT TESTER FOR HGV | 1 | ||
| SPL-14000 | SPECIAL TOOL | 1 | ||
| ST-24-14-0002-03-04 | CHIMENEA - DRILLING GUIDE - 3/16 EXTERNAL - 1/8 IN | 1 | ||
| ST-24-14-0002-04-04 | CHIMENEA - DRILLING GUIDE - 1/4 EXTERNAL - 1/8 INT | 1 | ||
| ST-24-14-0002-04-06 | CHIMENEA - DRILLING GUIDE - 1/4 EXTERNAL - 3/16 IN | 1 | ||
| ST-24-14-0002-05-04 | CHIMENEA - DRILLING GUIDE - 5/16 EXTERNAL - 1/8 IN | 1 | ||
| ST-24-14-0002-05-06 | CHIMENEA - DRILLING GUIDE - 5/16 EXTERNAL - 3/16 I | 1 | ||
| ST-24-14-0002-05-08 | CHIMENEA - DRILLING GUIDE - 5/16 EXTERNAL - 1/4 IN | 1 | ||
| T-8819114000 | ENGINE STAND | 2 | ||
| TCS1201/4000/10766/38 | TCS1201/4000/10766/38 TOOL SET | 1 | ||
| TMH EC14-00-00 | ENGINE CRADLE | 1 | ||
| TMHCR01-40-00 | 45 Tons - Wheel Axle Jack | 2 | ||
| TR0140-00 | TRANSFORMER | 1 | ||
| U140006+++ | THREAD INSERT | 1 | ||
| URA009140000000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| WDFDATEL1014-000 | AUTO PRESSURISATION TEST SET | 1 | ||
| WIL21400-01 | SPINDLE ASSEMBLY | 1 | ||
| YLB-9501501/4000 | TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
