| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 13001 | Norbar 13001 - TW MDL 5 ADJ 1-5 Nm | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98D27504113001 | KIT KIT - FLAP RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104013001 | SPLNTASS SPLINT ASSEMBLY - SIDE STAY (A) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53113001000 | SUPPORT TABLET INSTALL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9213001-0001 | KIT, PRESSURIZATION BLANKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EC013-001 | ENGINE CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| 02-781300100 | JACK, TRONAIR GSE | 1 | |
| 02130018 | 4606.18-11/16-3/8" SPARK PLUG SOCKET,-HEX | 1 | |
| 03-8130-0100 | MAIN JACK | 1 | |
| 04Y0013-001 | PROTECTIVE COVER, JET PIPE | 1 | |
| 08130010 | 1414.T.10-T10 x 1/4 TORX SCREWDRIVER BIT | 1 | |
| 08130015 | 1415.T.15-T15 x 1/4 TORX SCREWDRIVER BIT | 1 | |
| 109-3130-01-113 | T/R STATIC BALANCE TOOL | 1 | |
| 109-3130-01-113 T/R | STATIC BALANCE TOOL | 1 | |
| 109-3130-01-117 | TOOL,BALANCING,TAIL ROTOR | 1 | |
| 109-3130-01-119 | TAIL ROTOR STATIC BALANCING TOOL | 1 | |
| 109-3130-01-121 | Plate Assembly | 1 | |
| 109-3130-01-125 | Spacer Assembly | 1 | |
| 109-3130-01-129 | Spacer Assembly | 1 | |
| 109-3130-01-13 | TAIL ROTOR BALANCING EQUIPMENT | 1 | |
| 109-3130-01-133 | Bushing Assembly | 1 | |
| 109-3130-01-147 | BALANCE SET, TR STATIC BALANCE | 1 | |
| 12145-113-001 | LENS REMOVAL TOOL EMERGENCY EGRESS LIGHT | 1 | |
| 12245-013-001 | BUSH REMOVAL / INSTALL TOOL FLAP ACTUATOR | 1 | |
| 132-006130-01 | PROJECTOR, MULTIMEDIA | 1 | |
| 14ME651300116 | TOOL | 1 | |
| 15713001 | KIT FILET RAPPORTÉ 10X32 | 1 | |
| 162T1300-1-A | ASSEMBLY KIT BUSHING (2IT) | 1 | |
| 162T1300-1-R | REMOVE KIT BUSHING (2IT) | 1 | |
| 170-23213-001 | THIS IS NOT A TOOL | Not Available | Not Available |
| 170-27413-001 | PIN ADAPTER | 1 | |
| 170-83113-001 | TERMINAL DOOR KIT | 1 | |
| 17130011 | ARTICULATED CLAM | 1 | |
| 182513-001 | GENERAL PROCESSOR | 4 | |
| 20130-0104 | THIS IS NOT A TOOL | Not Available | Not Available |
| 20130-0105 | PROBE-WING TANK | 1 | |
| 20130-0106 | PROBE-WING TANK | 1 | |
| 20130-0109 | THIS IS NOT A TOOL | Not Available | Not Available |
| 20130-0112 | THIS IS NOT A TOOL | Not Available | Not Available |
| 20130-0113 | THIS IS NOT A TOOL | Not Available | Not Available |
| 20130-0114 | THIS IS NOT A TOOL | Not Available | Not Available |
| 20130-0116 | THIS IS NOT A TOOL | Not Available | Not Available |
| 2130018 | 3/8" SPARK PLUG SOCKET,-HEX | 1 | |
| 2309-S013-001 | DEVICE ASSEMBLY BUSHING | 1 | |
| 2309-S213-001 | BUSHING ALIGNER | 1 | |
| 247A1130-010-001PTE1 | TOOL | 1 | |
| 291300-1 | HOLDER AND DRIVER PROOF LOADING | 1 | |
| 30313-0017 | PIN SHACKLE | 1 | |
| 3130.0199 | HYDRAULIC BRAKE TESTER PUMP | 1 | |
| 31J13001 | BRACKET | 1 | |
| 34130011-01 | ADAPTER # ADAPTOR-CHARGING,PITOT PR | 1 | |
| 350A94-1130-01 | Main Rotor Blade Trim Tab Tools | 1 | |
| 3719013-001 | WAVEGUIDE SWITCH ASSEMBLY | 1 | |
| 407-201-300-101 | Swashplate Rigging Tool | 1 | |
| 415113-001 | POWER SUPPLY | 1 | |
| 444900GSE1-3001 | LOCK COLLAR | 1 | |
| 46313001 | 4631.PH1-NEW-PH1 DRALL+ S'DRIVER EX LONG | 1 | |
| 465130-01 | PORTABLE DATA BASE LDL-4000 | 1 | |
| 465130-01-01 | PORTABLE DATA LOADER | 3 | |
| 46713001 | 4671.1 VDE POZIDRIV SCREWDRIVER PZ1 | 1 | |
| 47513001 | 4751.1 - NEW-No1 FINE ELECTRONIC S'DRIVER | 1 | |
| 491B1613001-007 | COVER | 2 | |
| 500-181-30 0-150 0,01 | MITUTOYO | 1 | |
| 50302130018 | ANNEAU DE JOINT 13X18X2 CUIVRE RECUIT | 1 | |
| 5130-01-232-4042 | RIVETER | 1 | |
| 5130013353554 | HAMMER PNEUMATIC | 1 | |
| 59521-3001 | BOLT | 1 | |
| 61130-012-002 | FLANGE SLEEVE | 1 | |
| 6130-01-361-0642 | BATTERY CHARGER ANALIZER | 1 | |
| 6130-01-511-1908 | THIS IS NOT A TOOL | Not Available | Not Available |
| 6130-01-518-6061 | CONVERTER GPU DC (INPUT VOLT 220,380, VOLTS 28.5 AMPS 600) | 1 | |
| 6130-01-525-1935 | BATTERY | 1 | |
| 6130-01-548-1505 | BATTERY CHARGER | 1 | |
| 6130-01-564-9082 | MOBILE 28V DC AIRCRAFT STARTING UNIT START PAC MODEL 6028QC | 1 | |
| 6130-01-691-0809 | BATTERY | 1 | |
| 62130010 | TRANSITION PART 3/4 "INSIDE 1/2" OUTSIDE | 1 | |
| 641300-1 | SOCKET | 1 | |
| 7-662100113-001 | TOOL KIT, | 1 | |
| 70130010 | 10776-SPECIAL PLANISHING HAMMER | 1 | |
| 70130011 | 10806-PECKING HAMMER | 1 | |
| 70130012 | 10811-PLANISHING AND GROOVING HAMMER | 1 | |
| 70130013 | 10812-PLANISHING AND GROOVING HAMMER | 1 | |
| 703A93-1130-01/PHP | BLADE TRIM TAB | 1 | |
| 703A94-11130-01 | THIS IS NOT A TOOL | Not Available | Not Available |
| 703A94-1130-01 | BLADE TRIM TAB | 2 | |
| 703A94113001/PHP | BLADE TRIM TAB | 1 | |
| 71130011 | 11050.1-TWO ARM PULLER | 1 | |
| 71130012 | TWO ARM PULLER | 1 | |
| 71130013 | 11050N-3-STANDARD TWO ARM PULLER | 1 | |
| 71130014 | 11050N-4-STANDARD TWO ARM PULLER | 1 | |
| 71130015 | 11050N-5-STANDARD TWO ARM PULLER | 1 | |
| 71130016 | 11050N-6-STANDARD TWO ARM PULLER | 1 | |
| 71300161-001 | ENGINE CONSOLE RIGGING KIT | 1 | |
| 72P5413001-LF | COWL DOOR SLING | 1 | |
| 73013001 | SLOTTED SCREWDRIVER W. 2 LAYER ERGO GRIP HANDLE | 1 | |
| 76413001 | 10613.21-BRAKE SPRING PLIERS | 1 | |
| 79130011 | H11050N GR.1-PULLER ARM SIZE: 1 | 1 | |
| 79130012 | PULLER ARM SIZE: 3 | 1 | |
| 79130013 | SPECIAL ARTICLE | 1 | |
| 79130018 | 11056 - REPLACEMENT HOOKS FOR PULLERS | 1 | |
| 800-0130-01 | UFDR Portable Test Interface | 1 | |
| 802-0130-01 | UFDR Portable Test Interface | 1 | |
| 8130010 | T10 x 1/4 TORX SCREWDRIVER BIT | 1 | |
| 8130015 | T15 x 1/4 TORX SCREWDRIVER BIT | 1 | |
| 83200513-001 | CABLE ASSY | 1 | |
| 85713001-001-141C | DUMMY FILLER CAP | 1 | |
| 8SC5013-001 | COVER ECS RAM AIR INTAKE LH | 3 | |
| 913001 | BLACK CASE POLYPRO MEGABAG1000 | 1 | |
| 980-1013-001 | BOARDING MUSIC TEST TAPE | 1 | |
| 981-3013-001 | DUMMY TEST MAGAZINE | 1 | |
| 98A10001013001 | TOOL | 1 | |
| 98A27504113001 | KIT FLAP RIGGING | 1 | |
| 98A27608013001 | TUBE | 1 | |
| 98D27504113001 | KIT - FLAP RIGGING | 15 | |
| 98D27504113001:FAPE3 | KIT-FLAP RIG | 1 | |
| 98D32104013001 | SPLINT ASSEMBLY - SIDE STAY (A) | 19 | |
| 98D53103013001 | TROLLEY-RADOME | 8 | |
| 98D57004013001 | TOOL | 1 | |
| 98F57103013001 | STUDS AND LOCATING PINS | 1 | |
| AC13001 | 3PC WIRE WHL | 1 | |
| AFS-1300-1 | CUSTOM 767 ANGLE BEAM TRANSDUCER 767Part 4 57-50-02 Pages 1-10 | 1 | |
| AGE-01213-001 | PLATE REST 1-AL | 1 | |
| AH130-010 | BUBBLE COVER, extends to cover fwd engine inlet | 1 | |
| AH130-012 | WINDSHIELD/NOSE COVER, std nose configuration, pinches into door jambs | 1 | |
| AH130-015 | INSULATED BUBBLE COVER | 1 | |
| AM013-001/-002 | TOOL | 1 | |
| AP120-0013-001 | TOOL KEY LOCK FAN CO | 1 | |
| AY969-00313-001 | COLLINS CABLES 860F-1/4 R/T 10FT | 1 | |
| C130-010 | WINDSHIELD/FLIGHT DECK AREA COVER | 1 | |
| C130-015 | WINDSHIELD/FLIGHT DECK AREA "BLACKOUT" COVER | 1 | |
| C130-017 | NOSE RADOME COVER | 1 | |
| C130012 | TEST SET,ANTI SKID | 1 | |
| CDI13001101 | DIGITAL PCB FOR QCE215A | 1 | |
| CDI1300133 | KEYPAD FOR 6004CF-II | 1 | |
| CJ1300-1 | SHAFT,1-IN OD,5/8IN-18 THREAD | 1 | |
| E-703A94-1130-01A | TRIM TAB BENDER | 1 | |
| E130-010 | BUBBLE COVER, extends to cover fwd engine inlet | 1 | |
| E130-012 | WINDSHIELD/NOSE COVER, std nose configuration, pinches into door jambs | 1 | |
| E130-015 | INSULATED BUBBLE COVER | 1 | |
| E60913-001 | ASSEMBLY BULLET | 1 | |
| EC013-001 | Engine cradle, TRENT 700 A330 | 1 | |
| EMB-00813-001 | Wrench | 1 | |
| EXBD400-50013-001 | CALIBRATION TEST STANDARDS FOR ECA INSPECTION (DHC) | 1 | |
| EXBD400-50113-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| F71300-1 | HOSE | 1 | |
| FMG-1501-30010A | FORCEMATE MANDREL GAGE | 1 | |
| FMG-1911-30010A | FORCEMATE MANDREL GAGE | 1 | |
| FYRG-591300-13G01 | TOOL | 1 | |
| G1001020013-001 | NLG WHEEL COVER ASSY | 1 | |
| G1300-13040 | PIN: ROLL,LG,1/8INX1/2IN, | 1 | |
| G1300-13060 | PIN, 1/8 X 3/4 LG ROLL, | 1 | |
| G1300-13100 | PIN: ROLL,LG,1/8INX1IN, | 2 | |
| G1300-13110 | PIN: 1/8X1-1/8 LG ROLL, | 1 | |
| G1300-13120 | PIN, 1/8 X 1-1/4 LG ROLL, | 1 | |
| G1300-13140 | PIN: ROLL,1/8INX1-1/2IN, | 1 | |
| G1300-16040 | PIN: ROLL,LG,5/32INX1/2IN, | 1 | |
| G1300-16050 | PIN: 5/32X5/8 LG ROLL, | 1 | |
| G1300-16055 | PIN: ROLL,LG,5/32INX11/16IN, | 1 | |
| G1300-16100 | PIN: ROLL,LG,5/32INX1IN, | 1 | |
| G1300-16120 | PIN: ROLL,LG,5/32INX1.25IN, | 1 | |
| G1300-19040 | PIN: ROLL,LG,3/16INX1/2IN, | 5 | |
| G1300-19060 | PIN: ROLL,3/16INX3/4IN, | 1 | |
| G1300-19070 | PIN: ROLL,ST, | 1 | |
| G1300-19100 | PIN: ROLL,LG,3/16INX1IN, | 1 | |
| G1300-19140 | PIN: ROLL,ST, | 2 | |
| GS13001 | TEE | 1 | |
| GSB2013001 | EQUALIZER | 1 | |
| HA-703A94-1130-01 | BLADE TRIM TAB | 1 | |
| IAE1J13001 | TOOL | 2 | |
| IAE1J13001R02 | TOOL | 1 | |
| JA-591300-13 | QUICK CONNECT ADAPTER | 1 | |
| JWP13001 | SCRAPER | 1 | |
| LI29113001-1 | DRAWER CABINET 564x725x1000mm | 1 | |
| LI29113001-2 | MASTER KEY | 1 | |
| LI29113001-3 | DRAWER CABINET 2x27E 100mm | 1 | |
| LTCT13001 | HOLDING FIXTURE | 1 | |
| LTCT14130-01 | Puller Assembly, Seal Removal | 1 | |
| MDTS11613-001 | TOP PLATE 'T' CLEAT | 1 | |
| NOR13001 | MODEL 5 TORQUE WR 1/4"DRV NM | 1 | |
| OHSS-212-070-013-001 | Cooler Plug LH or RH | 1 | |
| R2213-001 | CAP:, | 1 | |
| RBE703A94-1130-01 | Main Rotor Blade Trim Tab Tools Assembly | 3 | |
| RBW109-3130-01-119 | Tail Rotor Static Balancing Tool | 2 | |
| RBW109-3130-01-121 | Plate Assembly | 2 | |
| RBW109-3130-01-125 | Spacer Assembly | 2 | |
| RBW109-3130-01-129 | Spacer Assembly | 2 | |
| RBW109-3130-01-133 | Bushing Assembly | 2 | |
| RFP-13001-001-2011 | ADAPTER, TORQUE WRENCH | 1 | |
| S500-213001-TFIX03-0001 | Pressuziration Blanking Kit | 1 | |
| SG703A94-1130-01 | BLADE TRIM TAB | 1 | |
| SK601-30012-001 | TOOL | 1 | |
| SLS-200-013-001 | SWASHPLATE RIGGING TOOL | 1 | |
| STN8130010 | BIT SCREWDRIVER 1/4IN HEX SHA | 1 | |
| STN8130015 | BIT SCREWDRIVER 1/4IN HEX SHA | 1 | |
| TAB 703A94-1130-01 | ENS. STEERING WHEEL TAB | 1 | |
| TJ12513001AAM | JACK | 1 | |
| TJ2S13001 | HYDRAULIC TRIPOD JACK | 1 | |
| TJ2S13001AAM0A0 | TRIPOD JACK | 1 | |
| TJ2S13001AAMAC | TRIPOD JACK:FLY-AWAY 130T WIDE BODY WING, | 2 | |
| WS7130010000 | TAP | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
