| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 110-08 | SWAGE INSPECTION GAUGE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) D11008K3D1E01B1 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| 01011008 | Socket 1/4" 1/4" L.22mm | 1 | |
| 011-00870-00 | GMU 44 | 1 | |
| 0110089 | INSTALLATION TOOL | 1 | |
| 0319110080 | DRIVER,PUMP | 1 | |
| 0390110080 | RING | 1 | |
| 05-3005-1100-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 05-3005-1100-81 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 05-3005-1100-82 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 05-3005-1100-83 | OPTION: HYD, | 1 | |
| 05-3005-1100-84 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 05-3005-1100-85 | OPTION: 220VAC 3PH 50HZ, | 1 | |
| 05-3005-1100-86 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 05-3005-1100-87 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 05-3005-1100-88 | OPTION: 440VAC 3PH 50HZ, | 1 | |
| 05-3005-1100-89 | OPTION: 308VAC 3PH 60HZ, | 1 | |
| 05-7008-1100-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 05-7008-1100-81 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 05-7008-1100-82 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 05-7008-1100-83 | OPTION: 575VAC 3PH 60HZ, | 1 | |
| 05-7008-1100-84 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 05-7008-1100-86 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 05-7008-1100-87 | HYDRAULIC RIG MINERAL | 1 | |
| 05-7008-1100-88 | OPTION: 440VAC 3PH 50HZ, | 1 | |
| 05-7015-1100-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 05-7015-1100-81 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 05-7015-1100-82 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 05-7015-1100-83 | HYD TEST STAND, | 1 | |
| 05-7015-1100-84 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 05-7015-1100-85 | OPTION: 220VAC 3PH 50HZ, | 1 | |
| 05-7015-1100-86 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 05-7015-1100-87 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 05-7015-1100-89 | OPTION: 380VAC 3PH 60HZ, | 1 | |
| 05-7022-1110-08 | OPTION: HOURMETER, | 1 | |
| 05-7023-1100-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 05-7023-1100-81 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 05-7023-1100-82 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 05-7023-1100-83 | OPTION: 575VAC 3PH 60HZ, | 1 | |
| 05-7023-1100-84 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 05-7023-1100-85 | OPTION: 220VAC 3PH 50HZ, | 1 | |
| 05-7023-1100-86 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 05-7023-1100-87 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 05-7023-1100-88 | OPTION: 440VAC 3PH 50HZ, | 1 | |
| 05-7023-1100-89 | OPTION: 380VAC 3PH 60HZ, | 1 | |
| 05-7025-1100-80 | OPTION: 208VAC 3PH 60HZ, | 1 | |
| 05-7025-1100-81 | OPTION: 220/230VAC 3PH 60H, | 1 | |
| 05-7025-1100-82 | OPTION: 440/460VAC 3PH 60H, | 1 | |
| 05-7025-1100-83 | OPTION: 575VAC 3PH 60HZ, | 1 | |
| 05-7025-1100-84 | OPTION: 200VAC 3PH 50HZ, | 1 | |
| 05-7025-1100-85 | OPTION: 220VAC 3PH 50HZ, | 1 | |
| 05-7025-1100-86 | OPTION: 380VAC 3PH 50HZ, | 1 | |
| 05-7025-1100-87 | OPTION: 415VAC 3PH 50HZ, | 1 | |
| 05-7025-1100-88 | OPTION: 440VAC 3PH 50HZ, | 1 | |
| 05-7025-1100-89 | OPTION: 380VAC 3PH 60HZ, | 1 | |
| 05-7045-1110-08 | OPTION: HOURMETER, | 1 | |
| 05-7046-1110-08 | OPTION: HOURMETER, | 1 | |
| 05-7047-1100-82 | OPTION: ELEC. 460/60/3PH, | 1 | |
| 05-7047-1100-83 | OPTION: 575VAC 3PH 60HZ, | 1 | |
| 05-7047-1100-85 | OPTION: 220VAC 3PH 50HZ, | 1 | |
| 05-7052-1100-82 | OPTION: 460VAC/60HZ/3PH, | 1 | |
| 05-7052-1100-83 | OPTION: 575VAC/60HZ/3PH, | 1 | |
| 05-7052-1100-86 | OPTION: 380VAC/50HZ/3PH, | 1 | |
| 05-7052-1100-87 | OPTION: 415VAC/50HZ/3PH, | 1 | |
| 05-7052-1100-88 | OPTION: 440VAC/50HZ/3PH, | 1 | |
| 05-7052-1100-89 | OPTION: 380VAC/60HZ/3PH, | 1 | |
| 101-10085A | ADAPTER:, | 1 | |
| 1011008 | 1/4DR x 8 SOCKET SPLINE-DRIVE | 1 | |
| 109-3110-08-01 | FIXTURE SMASH PLATE | 1 | |
| 109-3110-08-1 | BASE | 1 | |
| 2301100830 | RETAINER | 1 | |
| 2411008-5-501 | THIS IS NOT A TOOL | Not Available | Not Available |
| 28011008 | Socket 1/4" 8mm | 1 | |
| 311008 | Pad | 1 | |
| 32110080 | WIRE BRUSH FOR RIVET HOLES | 1 | |
| 32110081 | WIRE BRUSH FOR RIVET HOLES | 1 | |
| 32110082 | WIRE BRUSH FOR RIVET HOLES | 1 | |
| 351-21100-845C | SCRAPER | 1 | |
| 369021100-80907 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D21100-809 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D21100-80907 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 41100808 | Ratchet wrench 8 5/16 L.121mm | 1 | |
| 58211008 | Ersatzteil L-BOXX® 136 Tragegriff | 1 | |
| 59011008 | Calibrating square conn. adapt 3/4" 3/4" | 1 | |
| 7-562110085-001 | TORQUE ADAPTER, M/R MIXER SUPPORT BOLT | 1 | |
| 70102-11008-101 | THIS IS NOT A TOOL | Not Available | Not Available |
| 71-1008-1CFB | NOSE COWL STAND CF6-50 | 1 | |
| 87110080 | Replacement nut f. pipe wrenches 4" | 1 | |
| AT1100-8 | O-RING | 1 | |
| BA-110-08-GB | SWAGE INSPECTION GAUGE | 1 | |
| BAH11100810 | FLAT FILE BASTARD 8IN | 1 | |
| BAH11100812 | 8" FLAT NO 1 CUT | 1 | |
| BAH11100820 | 8IN FLAT FILECUT 2 | 1 | |
| BAH11100822 | FLAT NO 2 CUT | 1 | |
| BAH11100830 | FILE 110 FLAT SMOOTH 8 | 1 | |
| BAH11100832 | 8" Flat File Smooth Cut | 1 | |
| BHC1-1100822 | 8" FILE FLAT C/W HANDLE CUT2 | 1 | |
| BON11008 | BI9/64 BallEnd Hex Insert Bit | 1 | |
| CDI6110080 | RATCHET ASSY. 1/4 NO Q.REL. | 1 | |
| CG9362101-1008 | FIRELOOP ADAPTOR | 1 | |
| CS-AGE-31100-8-18 | JUNTA | 1 | |
| CS-AGE-31100-8-19 | JUNTA | 1 | |
| CS-AGE-31100-8-20 | Junta | 1 | |
| D11008 | JACK - TRIPOD, MAIN BODY/WING | 1 | |
| D11008K3D1B01B0 | TRIPOD JACK | 1 | |
| GSB1011008 | COVER-ECS RAM AIR DUCT (LEFT SIDE) (INCLUDED IN FLYAWAY KIT P/N GSB1000027) | 1 | |
| HAY5711-0080 | MACHINE REAMERS 8MM | 1 | |
| HFS-EB2G1100-8 | SWAGE GAUGE | 1 | |
| HG110-08 | SWAGE GAGE | 1 | |
| IAE1F11008 | ref only - check S2 can MFR | 1 | |
| JHW11008 | HI POL-WRENCH 14 1/4-1-1/16 | 1 | |
| M83461-1-008 | THIS IS NOT A TOOL | Not Available | Not Available |
| MBF2110-08 | COMPOSI-LOK TOOL | 1 | |
| MV061-1008 | COUPLER-FLARE F #10 X #8 | 1 | |
| NAS1611-008A | PACKING, PREFORMED O | 1 | |
| PN2-811008A | 1/2OZ HAMMER BLUE UN1263 | 1 | |
| SEY11100-80 | D90 D80 GOLD SLEEVE 95MML | 1 | |
| VSE-1100-85M-ENC | VSE-1100-85M-ENC;VSE-1100 85 MHz - Encore | 1 | |
| WAVEB2G11008 | STRAIGHT HANDLE PADDLE GAGE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
