| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 11001 | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | S | 12 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 01-1001-05 | ANALYZER, DATABUS (CALIBRATION) | 2 | ||
| (CALIB) 01-1001-06 | TOOL | 1 | ||
| (CALIB) 01-1001-10 | TOOL | 1 | ||
| (CALIB) 01-1001-11 | TOOL | 1 | ||
| (CALIB) 01-1001-12 | DATA ANALYZER (CALIBRATION) | 1 | ||
| (CALIB) 01-1001-13 | TOOL | 1 | ||
| (CALIB) 01-1001-50 | TOOL | 1 | ||
| (CALIB) 01-1001-60 | TOOL | 1 | ||
| (CALIB) 414900GSE1-1001 | LOCK COLLAR, MFS ACTUATOR SPOILER | 1 | ||
| (CALIB) 429EBP-220 (01-1001-12/882) | ARINC 429 DATABUS ANALYZER (CALIBRATION) | 1 | ||
| (CALIB) 429EBP(01-1001-12/882) | ARINC 429 DATA BUS ANALYZER (CALIBRATION) | 1 | ||
| (CALIB) 636-1100_1GSE | INLET COWL SLING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D71203011001 | BOOTSTRAP SYSTEM PW (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D71203011001_RtSt | BOOTSTRAP SYSTEM PW (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F55307511001 | SLING SLING-R I VERTICAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L54503011001 | DEVICE DEVICE-RI BOOMERANG SPIGOT,EA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) APV7110-01-0G | SLING SLING - INLET COWL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) EME11001L001 | SHUTTLE,ENGINE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) WKJ11001-001 | WEIGHING SYSTEM (1100 KN) (CALIBRATION) (CALIBRATION) | 1 | ||
| 01-1001-00 | ARINC TRANSCEIVER | 1 | ||
| 01-1001-05 | ARINC 429EX DATABUS ANALYZER | 4 | ||
| 01-1001-1 | ANALYSER DATA BUS | 1 | ||
| 01-1001-10 | ANALYZER - DATA BUS, ARINC 429 | 1 | ||
| 01-1001-12 | TESTER ARINC 429 | 5 | ||
| 01-1001-60 | ARINC 429 TX/RX/KINETICS CASE/28 VOLT DC DATABUS ANALYZER | 2 | ||
| 01-1211-0010 | TOWBAR | 1 | ||
| 01-1211-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 0141811001500 | EWE8000PTG-R - PORTABLE THREAD GENERATOR RADAR | 1 | ||
| 0174110010 | COVER | 1 | ||
| 01A1211-0010 | TOWBAR: FALCON,3 ID EYE, | 1 | ||
| 01B1211-0010 | TOWBAR: CUSTOM,FALCON 50/900, | 1 | ||
| 02-0524-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-0530-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-0532-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-0540-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-0566-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-1256-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-2560-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7802-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7804-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7805-0110-01 | PNEUMATIC AIR PUMP, | 1 | ||
| 02-7809-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7810-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7815-0110-01 | OPTION 1, | 1 | ||
| 02-7822-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7828-0110-01 | PNEU. AIR. OPTION, | 1 | ||
| 02-7839-0110-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02110010 | 456.10-3/8DR x 10mm HEX SOCKET | 1 | ||
| 02110011 | 456.11-3/8DR x 11mm HEX SOCKET | 1 | ||
| 02110012 | 456.12-3/8DR x 12mm HEX SOCKET | 1 | ||
| 02110013 | 456.13-3/8DR x 13mm HEX SOCKET | 1 | ||
| 02110014 | 456.14-3/8DR x 14mm HEX SOCKET | 1 | ||
| 02110015 | 456.15-3/8DR x 15mm HEX SOCKET | 1 | ||
| 02110016 | 456.16-3/8DR x 16mm HEX SOCKET | 1 | ||
| 02110017 | 456.17-3/8DR x 17mm HEX SOCKET | 1 | ||
| 02110018 | 456.18-3/8DR x 18mm HEX SOCKET | 1 | ||
| 02110019 | 456.19-3/8DR x 19mm HEX SOCKET | 1 | ||
| 03110014 | 50.DSQ.14-*OBS*1/2" SOCKETS, DBLE SQUARE | 1 | ||
| 0319110010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 04Y 0011-001 | HANDLE (PIVOT DOOR) | 6 | ||
| 05-3005-1100-14 | OPTION: DU, | 1 | ||
| 05-3005-1100-16 | OPTION 16, | 1 | ||
| 05-3010-1100-14 | OPTION: DUAL SYSTEM, | 1 | ||
| 05-3010-1100-16 | OPTION: RE, | 1 | ||
| 05-7008-1100-14 | OPTION: DU, | 1 | ||
| 05-7008-1100-16 | OPTION: RE, | 1 | ||
| 05-7015-1100-14 | CROSS CHEC, | 1 | ||
| 05-7015-1100-16 | HYD UNIT, | 1 | ||
| 05-7022-1100-16 | OPTION: RE, | 1 | ||
| 05-7023-1100-14 | OPTION, | 1 | ||
| 05-7023-1100-16 | OPTION: RE, | 1 | ||
| 05-7046-1100-16 | OPTION: RE, | 1 | ||
| 05057111001 | TOOL | 1 | ||
| 07-110-0120 | SMART CABLE BANANA PLUG ADAPTER | 1 | ||
| 08011001 | PH/PZ.1221-*OBS* TWINBITS (POZI & PH 1) | 1 | ||
| 1-100-131-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1-1001-05 | AIRCRAFT DATA TRANSCEPTOR | 1 | ||
| 109011001-109E023A | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | ||
| 11-001-JT | TOOL | 1 | ||
| 11-001-JT2 | TOOL | 1 | ||
| 11-001A-JT | TOOL | 1 | ||
| 11-001C | TOOL | 1 | ||
| 110-013 | NIPPLE, QUICK DISCONNECT | 1 | ||
| 110-016 | NIPPLE, 1/2"MNPT, PLATED STEELQUICK COUPLER NIPPLE,1/4"MNPT,PLATED STEEL | 1 | ||
| 110-019 | REPLACEMENT GROMMET | 1 | ||
| 1100-15 | RETAINING RING PLIERS | 5 | ||
| 1100-1590-G/D-165 | GUN BARREL DRILL #21 | 1 | ||
| 1100-15PM | PLIERS-RETAINING RING | 1 | ||
| 1100-1890-G/D-165 | GUN BARREL DRILL #12 | 1 | ||
| 110011108 | MANOMETER | 1 | ||
| 1100114 | CALIBRATION BLOCK (2-164-551) NFE | 1 | ||
| 110018-11 | #2 ENG BOOTSTRAP KIT | 1 | ||
| 11001A | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | SWAN NECK HANDLE | 11 | 1 | ||
| 11011001 | 405/2QR-1/4" QUICK RELEASE EXTN. 2" | 1 | ||
| 11110010 | 1/4" HI-LOK FINE T RATCHET | 1 | ||
| 12011001 | 427/3QR-3/8DR QUICK RELEASE EXTENSION | 2 | ||
| 121711-001 | DATAFX BATTERY CELL MONITOR | 1 | ||
| 12245-011-001 | ULTRASONIC CALIB.STANDARD LEAR 45 NTM 57-30-05 | 1 | ||
| 13011001 | 509/2QR-1/2DR QUICK RELEASE EXTENSION | 1 | ||
| 141811001500.00 | EWE8000PTG-R - PORTABLE THREAD GENERATOR RADAR | 1 | ||
| 1461100-16 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1561200TF1-1001 | TEST FIXTURE | 1 | ||
| 1561300TF1-1001 | TEST FIXTURE | 1 | ||
| 1561320TF1-1001 | TEST FIXTURE | 1 | ||
| 15W1011-001 | DRAIN LEAKAGE DETEC-TION / MEASUREMENT | 1 | ||
| 160-11001-990 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 18110016 | 12503-STUBBY BIT HOLDER | 1 | ||
| 190-T011-001 | INSTALLATION TOOL BULLET | 1 | View Images / Tech Appraisal | |
| 206-011-100-109 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 206-011-100-145 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2110010 | 3/8DR x 10mm HEX SOCKET | 1 | ||
| 2110011 | 3/8DR x 11mm HEX SOCKET | 1 | ||
| 2110012 | 3/8DR X 12MM HEX SOCKET | 1 | ||
| 2110013 | 3/8DR x 13mm HEX SOCKET | 1 | ||
| 2110014 | 3/8DR x 14mm HEX SOCKET | 1 | ||
| 2110015 | 3/8DR x 15mm HEX SOCKET | 1 | ||
| 2110016 | 3/8DR x 16mm HEX SOCKET | 1 | ||
| 2110017 | 3/8DR x 17mm HEX SOCKET | 1 | ||
| 2110018 | 3/8DR x 18mm HEX SOCKET | 1 | ||
| 2110019 | 3/8DR x 19mm HEX SOCKET | 1 | ||
| 212-41100-16 | pasador roscado | 1 | ||
| 21C3110-014 | ROTOR BLADE GAGE | 1 | ||
| 21C3110-016 | ROTOR BLADE GAGE | 1 | ||
| 21C3110-018 | ROTOR BLADE GAGE | 1 | ||
| 2309-T011-001 | TORQUE WRENCH | 1 | ||
| 2421100160 | EN-DOUILLE ARBRE TL | 1 | ||
| 251A2170TF1-1001 | FIXTURE - CONTROL VALVE FLOW GRIND | 1 | ||
| 274000TF1-1001 | FIXTURE AIRCRAFT MAINTENANCE | 1 | ||
| 274010TF1-1001 | TEST FIXTURE INSTALLATION KEY | 1 | ||
| 274030TF1-1001 | TEST FIXTURE | 1 | ||
| 274610TF1-1001 | TEST FIXTURE | 1 | ||
| 282700TF1-1001 | Test Fixture | 1 | ||
| 283200TF1-1001 | TEST FIXTURE ASSEMBLY, OUTBOARD AILERON PCA | 1 | ||
| 3028011001 | CLINOMETER | 1 | ||
| 31111-001 | STARTER PIPE TIE-ROD CLAMP (AFT) | 1 | ||
| 3161100-1 | Tube | 1 | ||
| 332A91-2110-01 | FUSELAGE TRANSPORT MOUNT | 1 | ||
| 341-1100-1GSE | DOLLY - INLET TRANS-PORT | 1 | ||
| 347-1100-1GSE | SLING, LIFT - ENGINE AIR INLET | 2 | ||
| 350A11-0010-07 | BLADE,MAIN ROTOR | 1 | ||
| 36-11-0010 | GAUGE 0-60 | 1 | ||
| 36-1100-1GSE | TOOL | 1 | ||
| 365A91311001 | MAST HOISTING RING | 1 | ||
| 375700GSE1-1001 | RIGGING BAR - HSTA | 2 | ||
| 376060GSE1-1001 | CABLE-RUDDER PCU INTERNAL LEAK DETECT VALVE ELECTRICAL TEST | 1 | ||
| 379-2011-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3791100-1 | GAGE SET SHIM CHECKING | 1 | ||
| 381500TF1-1001 | TEST FIXTURE | 1 | ||
| 381540TF1-1001 | ACTUATOR TEST FIXTURE | 1 | ||
| 381570TF1-1001 | YAW DAMPER TEST FIXTURE | 1 | ||
| 390500TF1-1001 | TEST FIXTURE, RUDDER PCU | 1 | ||
| 390598TF51-1001 | TEST BOX, PRESSURE SENSOR | 1 | ||
| 390600TF1-1001 | Test Fixture, Elevator PCU | 1 | ||
| 390700GSE1-1001 | COLLAR-SPOILER ALIGNMENT / INSTALLATION TOOL | 7 | ||
| 411001 | TESTER - OVERHEAT DETECTION LOOP, AERO FLI | 1 | ||
| 41110013 | 1023-SPECIAL RING SPANNER, 13MM | 1 | ||
| 414900GSE1-1001 | LOCK COLLAR, MFS ACTUATOR SPOILER | 10 | View Images / Tech Appraisal | |
| 414900GSE1-1001ALT | ASSY - SAFETY COLLAR-SPOILER ACTUATOR EMB195 | 1 | ||
| 415200GSE1-1001 | HORIZONTAL STABILIZER RIGGING TOOL | 3 | View Images / Tech Appraisal | |
| 416200GSE1-1001 | TOOL, ACTUATOR RIG-GING - HORIZONTAL STABILIZER | 5 | View Images / Tech Appraisal | |
| 419300TF1-1001 | TEST FIXTURE | 1 | ||
| 429EBP 01-1001-02 | ARINC 429 TX/RX | 1 | ||
| 429EBP-220/01-1001-12 | ARINC 429 Analyzer | 1 | ||
| 43-841100-100 | BLANKING PLUG | 1 | ||
| 445000GSE1-1001 | LOCK COLLAR | 1 | ||
| 449000GSE1-1001 | LOCK COLLAR | 1 | ||
| 456800GSE1-1001 | CLAMP - PCU LOCKING, SPOILER | 1 | ||
| 462900GSE1-1001 | FIXTURE - RIGGING AND MAINTENANCE INTER-FACE, FLIGHT CONTROL SYSTEM | 1 | ||
| 46311001 | 4631.1-PH1 S'DRIVER DRALL+ LONG | 1 | ||
| 483900GSE1-1001 | COLLAR | 1 | ||
| 484300GSE1-1001 | SPOILER, LOCK COLLAR ASSEMBLY | 1 | ||
| 488200GSE1-1001 | LOCKING TOOL-FLAP ACTUATOR | 1 | ||
| 490500GSE1-1001 | MULTI FUNCTION SPOILER (MFS) ACTUATOR PISTON ROD SUPPORT COLLAR | 1 | ||
| 490640GSE1-1001 | GROUND SPOILER ACTUATOR PISTON ROD SUPPORT COLLAR | 1 | ||
| 490700GSE1-1001 | HSTA SECONDARY PIN TOOL | 1 | ||
| 4AS9910011-001 | NOSE JACK PAD - G200 | 3 | ||
| 51-620511-001 | NWA320 TU TEST SOFTWARE (ROCKWELL COLLINS) | 1 | ||
| 5110-01-620-4080 | CABLE TIE GUN | 1 | ||
| 5110-01007 | TOOL | 1 | ||
| 513400GSE1-1001 | NO-BACK TEST GSE | 1 | ||
| 51375151-1001 | DISPLAY | 1 | ||
| 517400GSE1-1001 | COLLAR, GROUND SPOILER ACTUATOR | 1 | ||
| 517540GSE1-1001 | COLLAR, GROUND SPOILER ACTUATOR PISTON ROD SUPPORT | 1 | ||
| 535110014 | ALU LADDER 3 STEPS | 1 | ||
| 6-11001-36 | DRAIN BYPASS TUBE | 4 | ||
| 6-11001-37 | RETAINER KEY | 1 | ||
| 600-0311-001 | INDEX HEAD | 1 | ||
| 61100-101 | ADAPTER ASSEMBLY, VA | 2 | ||
| 634-1411-001 | EXTENDER | 1 | ||
| 636-1100-1GSE | A320 Inlet Cowl Sling | 6 | ||
| 649-0911-001 | RECORDING CONTROL ADAPTER | 1 | ||
| 671100122 | RICAMBIO PERMASWAGE PER HEAD ASSY | 1 | ||
| 68101L929111001 | GAUGE TOOL FOR TERMINAL CRIMPING | 1 | ||
| 68D050071-1001 | TOOL KIT REPAIR COMPOSITE | 1 | ||
| 68D110031-1001 | LOX CONVERTER VENT ADAPTER TUBE+CONNECTING ADAPTER | 1 | ||
| 68D141171-1001 | CABLE ASSEMBLY, SPECIAL PURPOSE W1 (CAGE CODE 76301) | 1 | ||
| 68D240021-1001 | WAVE GUIDE PRESSURE TESTER | 1 | ||
| 68D290021-1001 | GAUGE, MC-7, 0-700 PSI | 1 | ||
| 7-262110010 | SLING SET- SLING ASSY UNIVERSAL | 1 | ||
| 7-262110018 | COMPRESSOR TOOL PEDA | 1 | ||
| 7-362110011 | SOCKET WRENCH | 1 | ||
| 7-363110010 | ADAPTER,TORQUE WRENCH | 1 | ||
| 70110010 | 10961 300 G-ENGINEERS HAMMER 300G | 1 | ||
| 70110011 | 10961 500 G-ENGINEERS HAMMER 500G | 1 | ||
| 70110013 | 10961 800 G-ENGINEERS HAMMER 800G | 1 | ||
| 70110015 | 10961 1000 G-ENGINEERS HAMMER 1000G | 1 | ||
| 70110016 | 10961 1500 G-ENGINEERS HAMMER 1500G | 1 | ||
| 70110017 | 10961 2000 G-ENGINEERS HAMMER 2000G | 1 | ||
| 71110013 | 11030N-1-UNIVERSAL WHEEL HUB PULLER | 1 | ||
| 71110015 | UNIVERSAL WHEEL HUB PULLER | 1 | ||
| 72900011-001 | Lever Assy Hand Pump | 4 | ||
| 74D510001-1001 | ADAPTER SET, PITOT | 1 | ||
| 7872611001-3 | MAGINFIER | 1 | ||
| 797-9711-001 | ADAPTOR TORQUE WRENCH | 1 | View Images / Tech Appraisal | |
| 7B-5311001 | TOOL | 1 | ||
| 7B-5311001CAL | Fixture | 1 | ||
| 811-0010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 811-00148SV | TEST SET,TTU415E, 600 SERIES | 1 | ||
| 8111001 | WRENCH | 1 | ||
| 82700011-001-138 | TOOL-AILERON RIGGING (DRAWING AND MYLAR TEMPLATE) | 1 | ||
| 846-901-100-1 | Engine Tool | 1 | ||
| 846-911-100-1 | Engine Tool | 1 | ||
| 85101-FE277211001 | Tank Pressure Tool | 1 | ||
| 85JA8211 - 001 | EXTERNAL FUEL TANK DOLLY (CENTERLINE) | 1 | ||
| 8SC5011-001 | KIT, FLYAWAY, MLG WHEEL COVER | 1 | ||
| 90201-11001-71 | WASHER PLATE | 1 | ||
| 9580110010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9682611001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9711100184 | SCREW | 1 | ||
| 988-3511-001 | POWER-POWER SUPPLY TESTING | 1 | ||
| 98A27608011001 | CONTROL BOX - SPOILER, VALVE GROUP | 1 | ||
| 98A27808611001 | TOOL CHECK-WING TIP BRAKE,SLAT FLAP | 1 | ||
| 98A27901011001 | TOOL | 1 | ||
| 98A32301011001 | PIN PLAIN | 1 | ||
| 98A54403011001 | REMOVAL ASSY - BALL JOINT | 4 | ||
| 98A54403011001REP19 | SPRING | 1 | ||
| 98A71103511001 | FAN COWL HOLD-OPEN FIXTURE LH | 1 | ||
| 98D27504111001 | COVER ASSY | 1 | ||
| 98D71203011001 | BOOTSTRAP SYSTEM FOR LEAP-1A | 9 | ||
| 98F324010011001 | TOOL-R I WHEELS | 1 | ||
| 98F55307511001 | SLING SLING, REM.-INST., VERTICAL STA | 2 | ||
| 98F55308311001 | TOOL SET - R/I VERTICAL STABILIZER | 2 | ||
| 98L25408711001 | SUPPORT-RI,LAVATORY | 1 | ||
| 98L54503011001 | DEVICE-RI BOOMERANG SPIGOT,EA | 4 | ||
| 98L57508011001 | TOOL | 1 | ||
| 98L7110H011-001 | PROTECTION BULLETS-FC HINGE BOLTS | 1 | ||
| 98S06002511001 | Outer Flap 0° Position JIG | 3 | ||
| 98S57003001100-11-REVB0 | RIB | 1 | ||
| 98S57003001100-12-REVB0 | SUPPORT TIE FITTING | 1 | ||
| 98S57003001100-18-REVB0 | SUPPORT PLATE | 1 | ||
| 9922110010 | CONNECTOR HERMETIC | 1 | ||
| 999-1100-1GSE | INLET COWL SLING | 1 | ||
| 9PRE65B00161-110-013 | PROTECTOR DE ROSCAS EJE SUPERIOR DE MUÑÓN | 1 | ||
| A11-001-04-01 | SHIPPING CRADLE - HTP | 1 | ||
| A11001 | KIT-SHOCK ABSORBER,NLG | 3 | ||
| A11001-10 | Decal-ground support equipment | 1 | ||
| A11001-13 | Decal-ground support equipment | 1 | ||
| A801-1001R | GUIDE - INSPECTION, FIBER OPTIC | 1 | ||
| AGE-02211-001 | WASHER-NYLON | 1 | ||
| AGE-02711-001 | TOOL | 1 | ||
| AGE-03211-001 | WAHSER-TEFLON | 1 | ||
| AH1100/11A-AF1 | ULTRA STABLE CAPACITANCE STANDARD | 1 | ||
| ALB1100-1 | POWER CABLE REPAIR KIT | 1 | ||
| APV7110-01-0 | SLING - INLET COWL | 3 | ||
| APV7110-01-0 REV B | INLET COWL SLING | 1 | ||
| APV7110-01-OG | INLET COWEL SLING | 3 | ||
| APV7110-0100 | TOOL | 1 | ||
| APV7110-0100G | TOOL | 1 | ||
| APV77110-01-0G | SLING INLET COWL | 1 | ||
| ARM0150011001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | ||
| ARM0200011001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | ||
| ARM0300011001901 | PROBES PN RSMV-S3P-35 (LENGTH: 110MM) | 1 | ||
| ASTW-10/1.100-1.500 | 5 STEP CLEAR ACRYLIC STEP WEDGE 2"X2" 1.100-1.500 | 1 | ||
| AT1100-10 | O-RING | 1 | ||
| AT1100-11 | O-RING | 1 | ||
| AT1100-12 | O-RING | 1 | ||
| AT1100-13MP4 | LOCK WASHER 4 PK | 1 | ||
| AT1100-14MP8 | LOCK WASHER 8 PK | 1 | ||
| AT1100-15MP4 | CAP SCREW 4 PK | 1 | ||
| AT1100-16MP8 | 8PK CAP SCREWS | 1 | ||
| AT1100-18 | PLUG | 1 | ||
| AT1100-19 | IN TRIGGER | 1 | ||
| B-711001 | NOSE COWL SLING | 1 | ||
| BAH1-1001212 | 12" HAND FILE CUT 1 C/W HANDLE | 1 | ||
| BAH1-1001222 | 12" HAND FILE W/HANDLE 2ND CUT | 1 | ||
| BAH11001012 | 10IN HAND W/HANDLE CUT 1 | 1 | ||
| BAH11001020 | 10IN HAND FILE CUT 2 | 1 | ||
| BAH11001022 | 10IN HAND W/HANDLE CUT 2 | 1 | ||
| BAH11001032 | 10" HAND,WITH HANDLE,CUT 3 | 1 | ||
| BH9811001 | PETROL JERRICAN 10L | 1 | ||
| CBM6-2-N-1-10-01-SFT | MANDREL TOOL | 1 | ||
| CC11-001 | EXTENDED CANOPY COVER, (Over-The-Top Style) Extends to L.E. of Horiz. Stabil., and Down to Fuselage Base | 1 | ||
| CDI61100100 | RAT HD ASSM 3/8DR NO QUICK REL | 1 | ||
| CG9362101-1001 | FIRELOOP ADAPTOR | 1 | ||
| CG9511001-0001 | #N/A | 1 | ||
| CP11001 | INSTRUCTION CARD | 1 | ||
| CS-AGE-31100-18 | Pistola de presión | 1 | ||
| D23581100-18 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D5211001220000 | BOLT | 7 | ||
| DAH601100-12PM | DAH 601100/12 STAKING TOOL | 1 | ||
| DAH601100/12 | Stacking Tool | 1 | ||
| DBS-1100-15 | RETENTION PAWL | 1 | ||
| DM60000911-00117 | APM CD ROM | 1 | ||
| ECF11001 | LIGHT BULB | 1 | ||
| EMB-00111-001 | Torque Wrench Extension ARM | 2 | ||
| EMB-00211-001 | Wheel Chock | 2 | ||
| EXBD400-50111-001 | CONFIRM FROM NDT FOR STANDARD | 1 | ||
| EXBD400-54011−001 | CALIBRATION TEST STANDARD | 1 | ||
| EXGC926-7011-001 | CALIBRATION STANDARD ASSY | 1 | ||
| FBPT-A801-1001P | FBPT-A801-1001P;Plug ARINC Type 1 Size 13-04 Shell Socket | 2 | ||
| FBPT-A801-1001R | FBPT-A801-1001R;Receptacle ARINC Type 1 Size 13-04 Shell Pins | 1 | ||
| FE171-110015 | TOOL LOCKING | 1 | ||
| FM110-015CFL | TOOL | 1 | ||
| FSR-1501-10010A | FORCEMATE REAMER, .2530 CUTTER/.2390 PILOT (CLASS 1) | 1 | ||
| FSR-1911-10010A | .2630 REAMER / .2450 PILOT (NOMINAL) | 1 | ||
| G-1100-106510 | BOLT, 5/16-24 HEX HD GR 5 | 1 | ||
| G1001020011-001 | WINDSHIELD COVER | 1 | ||
| G1003211001-001 | MLG GROUND LOCK PIN | 1 | ||
| G1100-105004 | BOLT, 1/4-20 HEX HD GR 5, | 2 | ||
| G1100-105006 | BOLT: HEX HD,ST, | 2 | ||
| G1100-105010 | BOLT: HEX HD,ST, | 1 | ||
| G1100-105014 | BOLT: 1/4-20 HEX HD GR 5, | 1 | ||
| G1100-105016 | BOLT: HEX HD,1/4-20,GR5,ST, | 1 | ||
| G1100-105026 | BOLT, 1/4-20 HEX HD GR 5, | 2 | ||
| G1100-105030 | BOLT: 1/4-20 HEX HD GR 5, | 1 | ||
| G1100-105034 | BOLT: 1/4-20 HEX HD GR 5, | 1 | ||
| G1100-105504 | BOLT, | 1 | ||
| G1100-105510 | BOLT: HEX HD, | 1 | ||
| G1100-105512 | BOLT: 1/4-28 HEX HD GR 5, | 1 | ||
| G1100-105520 | BOLT: HEX HD,ST, | 1 | ||
| G1100-106004 | BOLT: HEX HD,ST, | 1 | ||
| G1100-106005 | BOLT: HEX HD,ST, | 1 | ||
| G1100-106504 | BOLT: 5/16-24 HEX HD GR 5, | 1 | ||
| G1100-106512 | BOLT: ST, 5/16INX1-1/14IN | 1 | ||
| G1100-106514 | BOLT, 5/16-24 HEX HD GR 5, | 1 | ||
| G1100-106520 | BOLT: HEX HD,ST, | 1 | ||
| G1100-107010 | BOLT: 3/8-16 HEX HD GR 5, | 1 | ||
| G1100-107012 | BOLT: 3/8-16 HEX HD GR 5, | 1 | ||
| G1100-107014 | BOLT, 3/8-16 HEX HD GR 5, | 1 | ||
| G1100-107020 | BOLT, 3/8-16 HEX HD GR5, | 1 | ||
| G1100-107506 | BOLT, 3/8-24 HEX HD GR 5, | 1 | ||
| G1100-107510 | BOLT: HEX HD, | 1 | ||
| G1100-107512 | BOLT, | 2 | ||
| G1100-107514 | BOLT: HEX HD,ST, | 1 | ||
| G1100-107516 | BOLT: HEX HD,ST, | 2 | ||
| G1100-107520 | BOLT: HEX HD, | 1 | ||
| G1100-107526 | BOLT: 3/8-24 HEX HD GR 5, | 1 | ||
| G1100-107530 | BOLT: HEX HD,3/8-24,GRADE 5,ST, | 1 | ||
| G1100-107534 | BOLT: HEX HD, | 1 | ||
| G1100-107540 | BOLT: HEX HD,3/8-24,ST, | 1 | ||
| G1100-107544 | BOLT: 3/8-24 HEX HD GR 5, | 1 | ||
| G1100-107550 | BOLT, | 1 | ||
| G1100-107560 | BOLT, 3/8-24 HEX HD GR 5, | 1 | ||
| G1100-108512 | BOLT: HEX HD,ST, | 1 | ||
| G1100-108514 | BOLT: HEX HD,ST, | 1 | ||
| G1100-108522 | BOLT: HEX HD,7/16-20,GRADE 5, | 1 | ||
| G1100-109016 | BOLT,1/2-13 HEX HD GR 5, | 1 | ||
| G1100-109050 | BOLT: HEX HD,ST, | 1 | ||
| G1100-109510 | BOLT: 1/2-20 HEX HD GR 5, | 1 | ||
| G1100-109512 | BOLT: 1/2-20 HEX HD GR 5, | 1 | ||
| G1100-109514 | BOLT: HEX,ST, HD GRADE 5,1/2-20 | 1 | ||
| G1100-109520 | BOLT: HEX HD, | 1 | ||
| G1100-109522 | BOLT: HEX HD,ST, | 1 | ||
| G1100-109524 | BOLT: HEX HD,ST, | 1 | ||
| G1100-109526 | BOLT: HEX HD,ST, | 1 | ||
| G1100-109530 | BOLT, 1/2-20 HEX HD GR 5, | 1 | ||
| G1100-109532 | BOLT: HEX HD,GR 5,1/2-20, | 1 | ||
| G1100-109540 | BOLT: 1/2-20 HEX HD GR 5, | 1 | ||
| G1100-109544 | BOLT: HEX HD,ST, | 1 | ||
| G1100-109550 | BOLT: 1/2-20 HEX HD GR 5, | 1 | ||
| G1100-109554 | BOLT: HEX HD,ST, | 1 | ||
| G1100-110016 | BOLT: 5/8-11 HEX HD GR 5, | 1 | ||
| G601R301100−1 | Kit − Piccolo Alignment Tools | 1 | ||
| G670521100-1 | PASSENGER DOOR - REMOVAL AND INSTALLATION | 1 | ||
| GG0281001-1001 | PLUG | 1 | ||
| GS11001 | FIXTURE MAIN CONTROL A | 1 | ||
| GSB0811001 | KIT-ELECTRONIC WEIGHING (MODEL JW-75J5) | 2 | ||
| GSB1211001 | KIT -MICROBIAL GROWTH DETECTION | 1 | ||
| GSB5111001 | Test Kit − Hardness (500 Kg) | 1 | ||
| GSB6110011 | TOOL-PROPELLER PITCH CHANGE | 4 | ||
| GSB6110012 | WRENCH PROPELLER NUT RATCHET | 2 | ||
| GSB6110013 | KIT-DYNAMIC PROPELLER BALANCING | 1 | ||
| HFL741100130 | CROSS COLD CHISEL | 1 | ||
| IAE1F11001 | ref only - check S2 can MFR | 1 | ||
| KL181-1001 | TOOL BODY | 1 | ||
| L11-001 | EXTENDED CANOPY COVER (Over-The-Top Style) | 1 | ||
| LGD11-001 | TOOL | 1 | ||
| LTCT32111-1001 | REMOVAL TOOL BEARING | 1 | ||
| M110-010 | COCKPIT/NOSE COVER | 1 | ||
| M65725110-010 | Head | 1 | ||
| M83726/31-1001P | RELAY 2 PDT, 10A, 28 VDC, TIME DELA | 1 | ||
| MDTS11611-001 | SPIGOT 'T' CLEAT | 1 | ||
| MRRP-RUK-1-100-10-1/4 | Mini Rotary Probe | 1 | ||
| MRRP-RUK-1-100-10-1/4-2-1.5-50 | Mini Roraty Probe | 1 | ||
| MRRP-RUK-1-100-10-3/16 | Mini Rotary Probe | 1 | ||
| MRRP-RUK-1-100-10-3/16-2-1.5-50 | Mini Roraty Probe | 1 | ||
| MRRP-RUK-1-100-10-5/32 | Mini Rotary Probe | 1 | ||
| MRRP-RUK-1-100-10-5/32-2-1.5-50 | Mini Roraty Probe | 1 | ||
| MRRP-RUK-1-100-10-7/32 | Mini Rotary Probe | 1 | ||
| MRRP-RUK-1-100-10-7/32-2-1.5-50 | Mini Roraty Probe | 1 | ||
| MRRPRUK1-100-1332-14-2-25 | MRRP-RUK-1-100-13/32-1/4-2-25 C/SINK PROBE | 1 | ||
| MRRPRUK11001052130 | MRRP-RUK-1-100-10-5-2-1-30 ROTARY C/SINK PROBE | 1 | ||
| MTOO01-212-41100-15 | Util montaje portajunta | 1 | ||
| NDT1100-100 | Boeing Standard | 1 | ||
| NDT1100-100-ABS | Boeing Standard | 1 | ||
| NOR120110.01 | TW 4AR-N ADJ 1" SQUARE DRIVE | 1 | ||
| OHSS-212-070-111-001 | Exhaust Cover | 1 | ||
| OU144711-001-002 | TOOL | 1 | ||
| PA11-001 | EXTENDED CANOPY COVER, (Over-The-Top Style) | 1 | ||
| PHXFAS110010 | STRIP DIP 100CT | 1 | ||
| PME1211B11001 | PORTABLE MECH EQUIPMENT VENTRAL ATTACH LH | 1 | ||
| PROO01-1001428-3 | Tapa Air Inlet | 1 | ||
| PWC11-001E | CLEANER, ALKALINE | 1 | ||
| PWC11001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| PWC37110-01 | TOOL | 2 | ||
| Q21961100-1 | TOOL | 1 | ||
| RBEVR-L11-0010-002-1 | Threaded Puller | 2 | ||
| RBEVR-L11-0010-002-2 | Press Tool | 2 | ||
| RBEVR-L11-0010-002-B | Rod Assembly | 1 | ||
| RBEVR-L11-0010-002-D | Rod Assembly | 1 | ||
| RBEVR-L11-0010-003-B | Spacer | 1 | ||
| RBEVR-L11-0010-004-B | Press Tool | 1 | ||
| RBEVR-L11-0010-005-B | Press Tool | 1 | ||
| RL11001 | NOZZEL FOR 442. - 1.0MM | 1 | ||
| RP-1100-15 | REPLACEABLE TIPS | 1 | ||
| S111001129070 | CRIMPING TOOL | 1 | ||
| S11100112CS20KS | PRONER HAND CRIMPING TOOLS | 1 | ||
| S7020-11001-1-4 | HINGE MOUNT | 1 | ||
| S71-1001 | ENG MOUNT BOLT KIT | 1 | ||
| SET86312011001 | JSP EVO 8 SAFEHELMET YELLOW | 1 | ||
| SK-1100-1 | PRESSURE DROP TUBE, OIL IN PORT | 1 | ||
| SK601-10019 | TOOL | 1 | ||
| ST931-100-1750(6) | BEARING BALL STAKE | 1 | ||
| SV-11-001-JT2 | TOOL | 1 | ||
| T-1110-010 | FLUID TRANSFER PUMP | 1 | ||
| T-BAL6110010 | FILLER FALCRANK RADIATOR | 1 | ||
| T10-00110-01 | SLIP, FIXTURE - AD-JUSTMENT, CLUTCH | 5 | ||
| TAL1903211001 | SEAL INSTALATION TOOL | 1 | ||
| TESA-01811001 | Tesa 01811001 - Analogue lever-type dial test indicator SWISSTAST Standard, Range - 0.2mm | 1 | ||
| TJ2S11001 | TOOL | 1 | ||
| TJ2S11001AAM0A0 | CENTER JACK POINTS | 1 | ||
| TMH BF01-10-01 | BLOC FORE | 1 | ||
| TR226-11001-19 | TB ST SMLS 4.75OD X 3.0ID, | 1 | ||
| TSF22T-11001-2 | PHENOLIC RIG PIN - LATERAL CONTROL | 1 | ||
| TSF27T-11001-1 | CONTROL WHEEL | 1 | ||
| TSF27T-11001-7 | CONTROL WHEEL TOOL | 1 | ||
| TSF28T-11001-19 | SURGE TANK INLET | 1 | ||
| TSF34T-11001-5 | TSF34T-11001-5 | 1 | ||
| TSF36T-11001-10 | ADAPTER, APU BLEED AIRCHECK VALVE | 1 | ||
| TSF36T-11001-6 | PLUG, APU BLEED AIR INLET | 1 | ||
| TSF38T-11001-22 | TEST SUPPORT FIXTURE, DRAIN MAST PLUG | 1 | ||
| TSF38T-11001-24 | PASSENGER WATER AIR GAUGE | 1 | ||
| TSF38T-11001-25 | TEST SUPPORT FIXTURE, PASSENGER WATER GAGE | 1 | ||
| TSF38T-11001-28 | DRAIN HOSE ASSY - POTABLE WATER SYSTEM | 1 | ||
| TSF38T-11001-29 | TEST SUPPORT FIXTURE, BREAKOUT BOX | 1 | ||
| TSF38T-11001-31 | TEST SUPPORT FIXTURE, WATER DRAIN AND PLUG TOOL | 1 | ||
| TSF38T-11001-32 | TEST SUPPORT FIXTURE, GRAY WATER DRAIN PLUG | 1 | ||
| TSF38T-11001-35 | TEST SUPPORT FIXTURE - GAUGE SHUT OFF VALVE | 1 | ||
| TSF49T-11001-6 | APU, FUEL DRAIN HOSE | 1 | ||
| U-212-41100.1M | útil montar | 1 | ||
| VR-L11-0010 | PRETENSIONING DEVICE | 1 | ||
| VR-L11-0010-002-1 | Threaded Puller | 1 | ||
| VR-L11-0010-002-2 | Press Tool | 1 | ||
| VR-L11-0010-002-B | Rod Assembly | 1 | ||
| VR-L11-0010-002-D | Rod Assembly | 1 | ||
| VR-L11-0010-003 | PLAIN WASH | 1 | ||
| VR-L11-0010-003-B | Spacer | 1 | ||
| VR-L11-0010-004 | UPPER SECURING PLATE | 1 | ||
| VR-L11-0010-004-B | Press Tool | 1 | ||
| VR-L11-0010-005 | INFERIOR SECURING PLATE | 1 | ||
| VR-L11-0010-005-B | Press Tool | 1 | ||
| VR-L11-0010-S00 | THREADED ROD SET | 1 | ||
| VR-L11-0010V | PRETENSIONING DEVICE | 1 | ||
| VTS-K0031100101 | COM-1768 10116928 / ALTAIR 5X MULTIGAS DETECTOR | 1 | ||
| Z080H1100110 | DEU A PCB LODER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
