| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 110-10 | SWAGE INSPECTION GAUGE | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 11-01-0203 | CRIMPING TOOL (CALIBRATION) | 1 | ||
| (CALIB) 401-10100 | LP SPIGOT COMPLETE SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A71101007000 | COWL HOLD-OPEN FIXTURE - ENGINE COWL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A71101007001 | FIXTURE HOLD-OPEN FIXTURE-ENGINE COWL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) A11010 | EXTRACTR EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9291101-0005 | CHECK VALVE LEAK CHECK ADAPTOR TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T5-2001-101-00 | TENSIOMETRE (CALIBRATION) | 1 | ||
| #011-01060-00 | 4 | |||
| 00711010N | PIN WRENCH | 1 | ||
| 01-1101-0000 | TOWBAR: CUSTOM,CITATION, DROP SHIP ONLY | 2 | ||
| 01011010 | Socket 1/4" 5/16" L.22mm | 1 | ||
| 011-01028-05 | COVER KIT | 1 | ||
| 011-01058-00 | GARMIN-GNC-420W-MST | 1 | ||
| 011-01060-00/ 365P0428357103 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 011-01085-01 | GSM 85 SLIP-CLUTCH SET FIXTURE | 1 | ||
| 0110108 | ADAPTOR | 1 | ||
| 01211010 | Crowring spanner 1/4" MJ10 L.31,9mm | 1 | ||
| 0301511010 | REINFORCEMENT | 1 | ||
| 0390110100 | RING | 1 | ||
| 06110-10 | TOOL | 1 | ||
| 08-91-1-01-00-0010 | CONNECTOR BLOCK+HANDLE | 1 | ||
| 1-10_100-2 | FIXED COAXIAL ATTENUATOR | 1 | ||
| 1.20.1101.002.003 | PLATFORM | 1 | ||
| 1011010 | 1/4DR x 10 SOCKET SPLINE-DRIVE | 1 | ||
| 109-3110-10-101 | Swashplate Positioning Tool | 1 | ||
| 109-3501-10-101 | WRENCH | 1 | ||
| 11-01-0008 | CRIMP TOOL, MOLEX | 2 | ||
| 11-01-0065 | Hand Crimp Tool for Board-In Terminal, 16-18 AWG | 1 | ||
| 11-01-0068 | Hand Crimp Tool for Board-In Terminal, 18-24 AWG | 1 | ||
| 11-01-0088 | Hand Crimp Tool for Board-In Terminal, 22-24 AWG | 1 | ||
| 11-01-0097 | Hand Crimp Tool for 2.36mm Diameter, Standard .093" Pin and Socket Crimp Terminal, 22-24 AWG | 1 | ||
| 11-01-0101 | Flat Blade Female Crimp Terminal, 14-20 AWG | 1 | ||
| 11-01-0117 | Hand Crimp Tool | 1 | ||
| 11-01-0168 | Extraction Tool | 1 | ||
| 11-01-0180 | Hand Crimp Tool | 1 | ||
| 11-01-0197 | CRIMPING TOOL | 1 | ||
| 11-01-0203 | CRIMPING TOOL | 1 | ||
| 110-101 | Mitutoyo 110-101 Differential Screw Translator Micrometer Head 2.5mm | 1 | ||
| 110-102 | Mitutoyo 110-102 Differential Screw Translator Micrometer Head 2.5mm | 1 | ||
| 110100 | LIGHT WEIGHT AIRCRAFT WATER DISINFECTION CART | 1 | ||
| 11010001 | Extension 1/4" L.54mm | 1 | ||
| 11010002 | Extension 1/4" L.150mm | 1 | ||
| 11010006 | Extension 1/4" L.100mm | 2 | ||
| 11010010 | Extension 1/4" L.254mm | 1 | ||
| 11010011 | Wobble-Drive-Extension 1/4" L.54mm | 3 | ||
| 11010011 STAH | 405/2W (405KW) PRAILGINTOJAS STWL | 1 | ||
| 11010012 | Wobble-Drive-Extension 1/4" L.150mm | 3 | ||
| 11010012 STAH | 405/6W PRAILGINIMAS STAHLWILLE | 1 | ||
| 11010014 | Extension 1/4" L.356mm | 1 | ||
| 11010016 | Wobble-Drive-Extension 1/4" L.100mm | 3 | ||
| 11010016 STAH | 405/4W STAHLWILLE | 1 | ||
| 11010020 | Wobble-Drive-Extension 1/4" L.254mm | 4 | ||
| 11010020 STAH | 405/10W PRAILGINIMAS STAHLWILLE | 2 | ||
| 11010024 | Wobble-Drive-Extension 1/4" L.356mm | 1 | ||
| 11010024 STAH | 405/14W PRAILGINIMAS STAHLWILLE | 1 | ||
| 11010108 | KATUN SCR DR 10108 | 1 | ||
| 110105 | SOCKET WRENCH COMPL. | 1 | ||
| 11111010 | Ratchet 1/4" L.117mm | 1 | ||
| 11B6641-1010 | POWER UNIT: GROUND,28.5V, | 1 | ||
| 1211010 | CROW-RING SPANNER,SPEC MOD. | 1 | ||
| 12111010 | Ratchet 3/8" L.193mm | 1 | ||
| 13111010 | Ratchet 1/2" L.265,5mm | 1 | ||
| 14-6911-0100 | UNIVERSAL TOOL STRUT 15 (CE) | 1 | ||
| 18−4201−1010 | Intensifier − Nitrogen Gas (Shop Air Powered) | 9 | ||
| 206-215-001-101/002-101 | B206B/L Trim Tab Tool Set | 1 | ||
| 250G-01-1-0-1-04-0-0-0 | 2-GALLON TURBINE OIL DISPENSER | 1 | ||
| 250G011010100AB | PUMP-MALABAR | 1 | ||
| 260P-07-1-1-1-0-1-0-A | HYJET IV DISPENSER | 1 | ||
| 28011010 | Socket 1/4" 10mm | 1 | ||
| 291-101-000-011 | TEST SYSTEM | 1 | ||
| 291-101-000-021 | TEST SYSTEM | 1 | ||
| 291-101-000-031 | VIBROMETER | 1 | ||
| 291-101-000-211 | VIBROMETER | 1 | ||
| 291-101-000-311 | VIBROMETER | 1 | ||
| 291-101-011-403 | TEST SYSTEM | 1 | ||
| 29P311 0105869 | Probe | 1 | ||
| 305-110-101-0 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3071101-01 | SWITCH | 1 | ||
| 321A11-0100-00 | HYDRAULIC SCRAPER GRATTOIR | 1 | ||
| 321A11-0100-000 | HYDRAULIC SCRAPERS | 1 | ||
| 362-031-101-0 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 370R-01-1-0-1-04-0-0-1 | TOOL | 1 | ||
| 370R011010201 | FLUID DISPENSER MIL-H-5606 | 1 | ||
| 3938041-101 OR F80-0-2624 | TORQUE ADAPTER | 1 | ||
| 401-10100 | SPIGOT LP SPIGOT COMPLETE SET | 1 | ||
| 411-010 | COCKPIT COVER | 1 | ||
| 41101010 | Ratchet wrench 10 3/8 L.133mm | 1 | ||
| 427-240-110-103 | Transmission Seal Ring | 1 | ||
| 44110-10A-E17 | QUICK DISCONNECT COUPLING | 1 | ||
| 44110-10E | GROUND SERVICE EQUIPMENT (GSE) QUICK-DISCONNECT COUPLINGS | 1 | ||
| 44110-10E-E17 | ADAPTER | 1 | ||
| 44110-10F-N1 | ADAPTER | 1 | ||
| 532811010 | PURGING TOOL | 1 | ||
| 58211010 | Ersatzteil L-BOXX® 136 Koppelhebel | 1 | ||
| 60110-101 | TOOL | 1 | ||
| 604C5811-010 | TOOL | 1 | ||
| 61-101-00425.D2 | WORK INSTRUCTIONS FOR DFQ40K | 1 | ||
| 611-1010-002 | CAP | 1 | ||
| 622-1101-001 | ILS SIGNAL GENERATOR (ROCKWELL COLLINS) | 1 | ||
| 68101L929110103 | CABLE CUTTING TEMPLATE | 1 | ||
| 68101L92911101003 | QUADRAX CUTTING TOOL | 1 | ||
| 68101L9291110103 | CUTTING TEMPLATE TOOL | 1 | ||
| 6912D11-0100-00 | PLEXIGLASS SCRAPER | 1 | ||
| 6912D11-0100-00/PHP | PLEXIGLASS SCRAPER | 1 | ||
| 70111010 | Lump hammer 1000g | 1 | ||
| 70CMK11010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 70EMM11010 | DIGITAL ENGINE CONTROL UNIT | 1 | ||
| 71110100015 | HELICOL INSERT M10X1.5 X 15 LG STAINLESS | 1 | ||
| 731/10.10 | 10mm OPEN END INSERT TOOL 9X12 | 1 | ||
| 74-110-10 | OIL QUANTITY INDICATOR | 1 | ||
| 77000D21101000000 | 14/15 HRG PHASE | 1 | ||
| 77000D33001101020 | 11/12 HL | 1 | ||
| 826477211010 | BAHCO EASYCU | 1 | ||
| 826480211010 | EASY CUT 3/4 | 1 | ||
| 826483311010 | EASY CUT 1IN | 1 | ||
| 87111010 | Pipe wrench 45° 1" L.316mm | 1 | ||
| 9110-10 | MAGNIFYING GLASS LAMP | 1 | ||
| 91101050 | TEXTILE TOOL BAG | 1 | ||
| 9562811010 | COLLAR | 1 | ||
| 98A71101000000 | TOOL | 1 | ||
| 98A71101003000 | ENGINE-BOOTSTRAP | 1 | ||
| 98A71101003005 | SUPPORT FWD CTR BEAM B/S | 1 | ||
| 98A71101007000 | HOLD-OPEN FIXTURE - ENGINE COWL | 2 | ||
| 98A71101007001 | HOLD-OPEN FIXTURE-ENGINE COWL | 3 | ||
| 98A71101007102 | CLAMP | 1 | View Images / Tech Appraisal | |
| 98A71101007120 | BUSHING | 1 | ||
| 98A71101007271 | SLEEVE | 1 | ||
| 98A71101012000 | PORTABLE DOLLY - STORAGE , AIR INTAKE | 1 | ||
| 98A71101020000 | ROD-HOLD OPEN - THRUST REVERSER COWLS | 1 | ||
| 98A71101023000 | ADAPTER CRADLE | 1 | ||
| 98A71101024000 | HOLD-OPEN FIXTURE | 1 | ||
| 98A71101025000 | HOLD-OPEN FIXTURE | 1 | ||
| 98D71101007001 | HOLD OPEN KIT COWL DOORS | 1 | ||
| 98V32201101000 | TOOL | 1 | ||
| 9EL403110-10 | LENS | 1 | ||
| A-TP-091101-02 | THIS IS NOT A TOOL | Not Available | Not Available | |
| A11010 | EXTRACTOR | 4 | ||
| A27110-10 | SLIDE | 1 | ||
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | ||
| AGE15110-10 | FERRULE, WElD, 063510 | 1 | ||
| APV7811-01-0G | LIFTING SLING-TRANSLATING SLEEVE, T/R | 1 | ||
| AST611110100 | 1/2" RIBE BIT SOCKET M10 100MM | 1 | ||
| AT110-10 | BALL BEARING | 1 | ||
| BA-110-10-GB | SWAGE INSPECTION GAUGE | 1 | ||
| BAH11101010 | 10 FLAT FILE CUT 1 | 1 | ||
| BAH11101012 | 10IN FLATFILE AND HANDLE CUT 1 | 1 | ||
| BAH11101020 | 10 FLAT FILE CUT 2 | 1 | ||
| BAH11101022 | 10 FLATWITH HANDLECUT 2 | 1 | ||
| BAH11101030 | FLAT FILE SMOOTH | 1 | ||
| BAH11101032 | FLAT FILE 10IN SMOOTH CUT 41 T | 1 | ||
| BH9811010 | PETROL JERRICAN 5 LITRE | 1 | ||
| BHC1-1101022 | 10" FILE FLAT C/W HANDLE CUT2 | 1 | ||
| C211010K | MANOMETRO 0-350 PSI | 1 | ||
| CG9291101-0005 | CHECK VALVE LEAK CHECK ADAPTOR TOOL | 1 | ||
| CG9471101-0001 | FTIS COOLING FAN KIT | 1 | ||
| CG9471101-0003 | FTIS COOLING FAN KIT | 1 | ||
| CT3110-105 | RING GEAR | 1 | ||
| E0091-10-100NN | STRAP - BONDING, ROU | 1 | ||
| ENGD11-0106CAL | TOOL | 1 | ||
| F01-10-1-01-00108,5х82 | SHEAR BOLT FOR TOWBAR В757 | 1 | ||
| FB70-025-100/110-10 | TOW EYE PLATE | 1 | ||
| FIL11010-1 | Ball lock pin | 1 | ||
| FIL11010-10-610 | Pin | 1 | ||
| FIL11010-10-S | Handle | 1 | ||
| FIL11010-101 | TOOL | 1 | ||
| FIL11010-103 | TOOL | 1 | ||
| FIL11010-104 | Cushion assy | 1 | ||
| FIL11010-11 | Locking pin | 1 | ||
| FIL11010-18 | TOOL | 1 | ||
| FIL11010-19 | TOOL | 1 | ||
| FIL11010-2 | TOOL | 1 | ||
| FIL11010-20 | TOOL | 1 | ||
| FIL11010-29 | TOOL | 1 | ||
| FIL11010-3 | TOOL | 1 | ||
| FIL11010-30 | TOOL | 1 | ||
| FIL11010-300 | TOOL | 1 | ||
| FIL11010-31 | TOOL | 1 | ||
| FIL11010-32 | TOOL | 1 | ||
| FIL11010-37 | TOOL | 1 | ||
| FIL11010-4 | Bolts assy | 1 | ||
| FIL11010-5 | Towbar assy | 1 | ||
| FIL11010-6-610 | Pin | 1 | ||
| FIL11010-SP | A319/320/321 shear pin | 1 | ||
| G-110-108514 | TRONAIR JACKS, BOLT, HEX HEAD, GRADE 5, (7/16-20 X 1 1/2" LONG) | 1 | ||
| G1002611010-001 | Firex Nozzle Alignment Tool | 1 | ||
| G1110-10-22A | BOLT, | 1 | ||
| G1110-107530 | BOLT: HEX HD,38 -24,GRADE 5, | 1 | ||
| G1161-101005 | SCREW: PAN HD,SLOTTED,#6-32, | 1 | ||
| GSB1011010 | MLG LEG PROTECTIVE SPOOL | 2 | ||
| HAY5711-0100 | MACHINE REAMERS 10MM | 1 | ||
| HC-1101-01 | VALVE: NEEDLE, | 1 | ||
| HC1101-02 | VALVE: NEEDLE, USE K4764=8G | 1 | ||
| HY51-101-006 | VERNIER | 1 | ||
| IAE1F11010 | ref only - check S2 can MFR | 1 | ||
| J211-01001-50 | KEYSK: STL .25-.25, | 1 | ||
| JF8110-10 | Rechargeable Compact Flood Light 10w Red | 1 | ||
| JHW11010 | WR SET 9PC 6MM-14MM | 1 | ||
| LS301-10-10 | 1MT RESTARAINT LANYARD | 1 | ||
| M110-100 | ENGINE INLET PLUGS (set of 2) | 1 | ||
| M21811010 | DUMMY BARREL | 2 | ||
| M21811010 (remplace M21811000) | FAUX CAISSON | 1 | ||
| MBF2110-10 | COMPOSI-LOK TOOL | 1 | ||
| MFWLR11010 | EBA-22-P .006SS 1/2 DIA COATD | 1 | ||
| MTOO11-101000200 | Conformador exterior floating | 1 | ||
| MUTL-C11010-M101-MFA | MUTL-C11010-M101-MFA;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X50/50 50UM MMF FC/APC | 1 | ||
| MUTL-C11010-M101-MFP | MUTL-C11010-M101-MFP;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X50/50 50UM MMF FC/PC | 1 | ||
| MUTL-C11010-M101-MLC | MUTL-C11010-M101-MLC;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X50/50 50UM MMF LC/PC | 1 | ||
| MUTL-C11010-M101-MLU | MUTL-C11010-M101-MLU;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X50/50 50UM MMF LC/APC | 1 | ||
| MUTL-C11010-M101-MSC | MUTL-C11010-M101-MSC;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X50/50 50UM MMF SC/PC | 1 | ||
| MUTL-C11010-M101-MSU | MUTL-C11010-M101-MSU;UTILITY CASSETTE WITH SPLITTER 1X10/90 1X50/50 50UM MMF SC/APC | 1 | ||
| NAS1611-010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| NAS1611-010A | PACKING | 1 | ||
| PTT110105 | RIVETER | 1 | ||
| PWC11010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| Q46110-100 | TOOL | 1 | ||
| RBW109-3110-10-101 | Swashplate Positioning Tool | 1 | ||
| RRT110109 | Lifting Sling | 1 | ||
| S211-010 | CANOPY/NOSE COVER (also covers turtledeck intakes) | 1 | ||
| SEY11010 | 44PC HYDRIC RAM SET | 1 | ||
| SWE58211010 | 731/10-03/19 O/ENDED INSERT | 1 | ||
| T011-01085-XX | SLIP-CLUTCH AJUSTMENT | 1 | ||
| T5-2001-101-00 | TENSIOMETER | 2 | ||
| T5-3001-101-00 | TENSIOMETER 0÷150 LBS | 1 | ||
| TEAN01-CE100811-0101 | Utillaje | 1 | ||
| TEAN02-CE100811-0101 | Utillaje | 1 | ||
| TEAN03-CE100811-0101 | Utillaje | 1 | ||
| TESA-00110101 | Tesa 00110101 ISOMASTER Standard Model with Analogue Indication 0-25mm | 1 | ||
| TESA-00110102 | Tesa 00110102 ISOMASTER Standard Model with Analogue Indication 25-50mm | 1 | ||
| TESA-00110103 | Tesa 00110103 ISOMASTER Standard Model with Analogue Indication 50-75mm | 1 | ||
| TESA-00110104 | Tesa 00110104 ISOMASTER Standard Model with Analogue Indication 75-100mm | 1 | ||
| TMH-BF11-01-00 | DRILLED BLOCK EQUIPPED | 1 | ||
| TS11-010 | CANOPY/NOSE COVER | 1 | ||
| V1101-01 | LABEL: MIL-PRF-83282D, | 1 | ||
| V1101-02 | LABEL: MIL-PRF-83282D, NO LONGER AVAILABLE | 1 | ||
| WAS6311-0100 | BUSHING | 1 | ||
| X632P1110101 | TOOL | 1 | ||
| Z0110108 | ADAPTOR | 1 | ||
| ZC110-10 | V-MEGAR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
