| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 110-05 | SWAGE INSPECTION GAUGE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F27508211005 | OPTICAL SET-OPTICAL ALIGNMENT,FLAPS (CALIBRATION) (CALIBRATION) | 1 | |
| 0000811005 | AIR HOSE 19LG.2M | 1 | |
| 02110050 | 456EF-SCKT EF BRAK SWIV SLV NUT | 1 | |
| 03110050 | 54.TXB.T.50-1/2DRxT50 TAMPER TORX DR SKT | 1 | |
| 03110055 | 54.TXB.T.55-1/2DRxT55 TAMPER TORX DR SKT | 1 | |
| 0400110050 | SCREW | 1 | |
| 0421100580 | SPACER | 1 | |
| 05-3010-1100-50HZ | HPU - INCLUDE VOLTAGE 0PTI0N, NO LONGER AVIAIBLE | 1 | |
| 100901-1005 | BATTERY ELIMINATOR | 1 | |
| 109-3110-05-109 | PULLER,SWASHPLATE DISASSEMBLY | 1 | |
| 109-3110-05-121 | RING ASSSY | 1 | |
| 109-3110-05-3 | RING PULLER | 1 | |
| 11-10050-1 | INSERTION EXTRACTION TOOL | 1 | |
| 11-10050-2 | INSERTION EXTRACTION TOOL | 1 | |
| 11-10050-3 | INSERTION EXTRACTION TOOL | 1 | |
| 11-10050-4 | INSERTION EXTRACTION TOOL | 1 | |
| 11-10050-5 | INSERTION EXTRACTION TOOL | 1 | |
| 110050 | Weight St Steel Hook 1/4 oz (Class 3) | 1 | |
| 110051 | Weight St Steel Hook 1/2 oz (Class 3) | 1 | |
| 110051533 | HEAT GUN KIT STEINEL HG2320E WITH REFLECTOR & REDU | 2 | |
| 110052 | Weight St Steel Hook 1 oz (Class 3) | 1 | |
| 110053 | Weight St Steel Hook 2 oz (Class 3) | 1 | |
| 1100532 | HARNESS | 1 | |
| 110054 | Weight St Steel Hook 4 oz (Class 3) | 1 | |
| 110055 | Weight St Steel Hook 8 oz (Class 3) | 1 | |
| 110056 | Weight St Steel Hook 16 oz (Class 3) | 1 | |
| 110057 | Weight St Steel Hook 32 oz (Class 3) | 1 | |
| 110058 | Weight St. Steel Hook 40 oz (Class 3) | 1 | |
| 110059 | TOOL | 1 | |
| 110059-501 | Engine Stands | 3 | |
| 11011005 | 405/14QR-1/4 QUICK RELEASE EXTN 14 | 1 | |
| 11A72-11005 | TOOL | 1 | |
| 121711-005 | TEST DATA FX | 1 | |
| 128D1100/-55 | AXLE JACK 65 TONS | 1 | |
| 130D1100-56 | 65 TON AXLE JACK-COLUMBUS | 1 | |
| 142D1100-56 | JACK AXEL 65T PORTAB | 2 | |
| 150D1100-56 | MODEL 8919 Â?? 45 TON "FLY-AWAY" AXLE JACK | 2 | |
| 150D1100/-56 (5007 -56FT) | JACK MLG | 1 | |
| 162A1100-5 | THIS IS NOT A TOOL | Not Available | Not Available |
| 170-70411-005 | THIS IS NOT A TOOL | Not Available | Not Available |
| 2421100500 | JET | 1 | |
| 269T9211-005 | Wrench Adapter Spanner, Lower Pulley FWD Nut | 2 | |
| 282900TF1-1005 | Test Fixture | 1 | |
| 3110050 | 1/2DRxT50 TAMPER TORX DR SKT | 1 | |
| 3110055 | 1/2DRxT55 TAMPER TORX DR SKT | 1 | |
| 314A6111-1005 | INLET-INNERBARREL PAINT COUPONS | 1 | |
| 347-1100-5GSE | PLUG, NACA SCOOP-EN-GINE AIR INLET | 1 | |
| 365A11-0050-10 | THIS IS NOT A TOOL | Not Available | Not Available |
| 365A11005009 | THIS IS NOT A TOOL | Not Available | Not Available |
| 41-01P11-0050-02 | TRACING TEMPLATE | 1 | |
| 411-005 | DORSAL PLUGS (set of 2) | 1 | |
| 42D1100-56 | JACK - AXLE, FLYAWAY | 1 | |
| 5180-15-141-1005 | TOOLS KIT AVIONIC | 1 | |
| 52110051 | 7751-TORQUE TESTER JACK CABLE (not spiral) | 1 | |
| 52110052 | 7752-TORQUE TESTER SPIRAL CABLE | 1 | |
| 52110054 | 7751/1-DATA CABLE FOR 7728 | 1 | |
| 52110055 | *OBSOLETE see 52110056* MAINS ADAPTOR 110V | 1 | |
| 52110056 | 7760-POWER ADAPTOR 110V 240V | 1 | |
| 52110057 | SPIRAL CABLE FOR 7728 | 1 | |
| 52110058 | 7751-3 CONNECTION CABLE | 1 | |
| 61001-1005 | THIS IS NOT A TOOL | Not Available | Not Available |
| 7-3640110057 | MAIN TRANSMISSION AS | 1 | |
| 704-2511-005 | ATP TEST CABLE | 1 | |
| 731/100.50 | 50MM OPEN END INSERT TOOL22X28 | 1 | |
| 731/100.55 | 55MM OPEN END INSERT TOOL22X28 | 1 | |
| 74D115271-1005 | REFERENCE STANDARD | 1 | |
| 8104P11-0050-02 | TRANSPARENT PANEL | 1 | |
| 811005 | AIR HOSE 19LG.2M | 1 | |
| 81451P11-0050-02 | DUMMY SLEEVE | 1 | |
| 81451P11-0050-04 | DUMMY SLEEVE | 1 | |
| 875D1100-56 | TOOL | 1 | |
| 9003P11-0050-02 | SCREEN,SILK | 1 | |
| 9004P11-0050-02 | SCREEN, SILK | 1 | |
| 96411005 | 240/5-SET OF 5 RATCHET WRENCHES | 1 | |
| 98A54003110050 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110052 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110053 | CONTROL-POSITION TOOL-BEAM ASSY, RH | 1 | |
| 98A54003110054 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110056 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110057 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98F27508211005 | SET-OPTICAL ALIGNMENT,FLAPS | 11 | |
| 98F27508211005 (CALIB) | OPTICAL SET-OPTICAL ALIGNMENT,FLAPS (CALIBRATION) | 1 | |
| 98S11005000202 | THIS IS NOT A TOOL | Not Available | Not Available |
| 98S11005000208 | THIS IS NOT A TOOL | Not Available | Not Available |
| 98S11005000214 | THIS IS NOT A TOOL | Not Available | Not Available |
| AT1100-5 | SPRING PIN | 1 | |
| AT1100-50 | CAM SHAFT | 1 | |
| AT1100-51 | SPRING | 1 | |
| AT1100-52 | ANVIL/SHORT | 1 | |
| AT1100-53 | RETAINING RING | 1 | |
| AT1100-54 | ANVIL SPACER | 1 | |
| AT1100-56 | HAMMR HOUSNG | 1 | |
| AT1100-5MP2 | SPRING PIN 2 PK | 1 | |
| BD10-793-PC-111005F | DIAL GAGE | 1 | |
| BON11005 | BALLEND HEX INSERT 3/32” | 1 | |
| CG9362101-1005 | FIRELOOP ADAPTOR | 1 | |
| CS-AGE-31100-5 | Rueda | 1 | |
| DSR4341-1005 | GAUGE PRESSURE | 1 | |
| EMB-01411-005 | ADAPTER - CABIN PRESSURIZATION TEST | 2 | |
| FBPT-A801-1005R | FBPT-A801-1005R;Receptacle ARINC Type 1 Size 13-04 Shell Pins Wide | 1 | |
| GG0281001-1005 | NAMEPLATE | 1 | |
| GS11005 | PLATE RIGHT ANGLE | 1 | |
| HAY5711-0050 | MACHINE REAMERS 5MM | 1 | |
| HG110-05 | SWAGE GAGE | 1 | |
| IAE1F11005 | ref only - check S2 can MFR | 1 | |
| JHW11005 | WR SET 14PC 1/4-1-1/16 | 1 | |
| KL181-1005 | CIRCLIP | 1 | |
| MRRPRUK1-100-58-516-2-25 | MRRP-RUK-1-100-5/8-5/16-2-25 C/SINK PROBE | 1 | |
| NDT1100-500 | Boeing Standard | 1 | |
| NDT1100-500-ABS | Boeing Standard | 1 | |
| NSA937211-005B | THIS IS NOT A TOOL | Not Available | Not Available |
| RRT111005 | TOOL | 1 | |
| SEY11100-50 | SLEEVE D60 D50 95L SILVER | 1 | |
| SEY11100-52 | SLEEVE D62 D52 95L SILVER | 1 | |
| SEY11100-54 | SLEEVE D64 D54 95L SILVER | 1 | |
| SEY11100-56 | SLEEVE D66 D56 95L GOLD | 1 | |
| SEY11100-58 | SLEEVE D68 D58 95L GOLD | 1 | |
| T-1501100550 | PLASTIC TLCSE, BLK,15X11X5.5 | 1 | |
| TFM250110054 | COUNTERSINK-100 DEG SPECIAL | 1 | |
| U8411005 | V205-RM : Delay Line Transduce | 1 | |
| VFI11005 | CUSTOM FOAM | 1 | |
| VFI11005PNP | CUSTOM FOAM BLACK/YELLOW W/PNP | 1 | |
| WAS6311-0056 | BUSHING | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
