| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10931 | BEARING BALL 8 X 22 X 7 | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| 109-3101-01-1 | MR HEAD SUPPORT STAND | 1 | ||
| 109-3101-01-101 | M/R HUB SUPPORT STAND | 1 | ||
| 109-3101-05-1 | SCREW GUIDE | 1 | ||
| 109-3101-06-111 | PULLER, DUPLEX BEARING REMOVAL | 1 | ||
| 109-3101-08-5 | WEIGHT,ROTOR B | 2 | ||
| 109-3101-10-1 | MAIN ROTOR BLADE STAND (MD P/N: 369D299913−37) | 1 | ||
| 109-3101-14-1 | Main Rotor Blade Trim Tab Gauge | 1 | ||
| 109-3101-16-1 | STAND MR BLADE STORAGE | 1 | ||
| 109-3101-17-1 | TROLLEY, MR BLADES TRANSPORT | 1 | ||
| 109-3101-17-101 | M/R/BLADE TRANSPORT CARRIAGE TROLLEY | 1 | ||
| 109-3101-19-1 | PIN,M/R BLADE RETENTION BOLT INSTALLATION | 1 | ||
| 109-3101-22-1 | WRENCH | 1 | ||
| 109-3101-23-1 | RULE, MR BALANCING CHART | 1 | ||
| 109-3101-24-1 | MAIN ROTOR TRIM TAB ADJUSTMENT TOOL | 1 | ||
| 109-3101-38-1 | WREANCH M/R HING | 1 | ||
| 109-3101-39-1 | ADAPTER ASSY M/R HING DUBLEX BEARING | 1 | ||
| 109-3101-40-1 | ADAPTER ASSY M/R HING DUBLEX BEARING | 1 | ||
| 109-3101-42-1 | TOOL | 1 | ||
| 109-3101-46-1 | TOOL, M/R GRIP BEARING INSTALL | 1 | ||
| 109-3101-51-101 | TOOL, M/R GRIP SEAL REMOVED | 1 | ||
| 109-3101-52-101 | M/R GRIP SEAL REMOVAL TOOL | 1 | ||
| 109-3101-58-1 | AW139 Tool- Tapping Hammer | 1 | ||
| 109-3101-58-2 | AW139 TOOL-TAPPING HAMMER | 3 | ||
| 109-3101-61-1 | RULE FOR BALANCE | 1 | ||
| 109-3101-62-101 | M/R GRIP SEAL INSTALLATION TOOL | 1 | ||
| 109-3101-63-1 | ADAPTER BEARING OUTER RACE REMOVAL | 1 | ||
| 109-3101-69-101 | 液压加油设备/FUELING FACILITY | 1 | ||
| 109-3101-69-301 | TOOL,HYDRAULIC CHARGING POR | 2 | ||
| 109-3101-71-1 | POSITIONING TOOL, TR HUB COVER | 1 | ||
| 109-3101-75-101 | tooling | 2 | ||
| 109-3101-83-101 | M/R HUB LIFTING SLING | 1 | ||
| 109-3101-83-113 | M/R HEAD LIFTING SLING | 1 | ||
| 109-3101-84-101 | TOOL CONTROLING | 1 | ||
| 109-3101-85-101 | TOOL MR GRIP BUSHING | 1 | ||
| 109-3101-86-101 | ASS. ATTREZZ | 1 | ||
| 109-3101-86-105 | TOOL | 1 | ||
| 109-3101-87-113 | TOOL ASSY,IN | 1 | ||
| 109-3101-93-101 | TOOL SET, ROTATING SCISSORS UPPER LINK BUSHINGS REMOVAL/INSTALLATION GF-19-00 | 3 | ||
| 109-3101-93-123 | TOOL SET | 1 | ||
| 109-3101-94-101 | Tool, Main Rotor Lever DU Washer Bonding | 1 | ||
| 109-3101-94-119 | TOOL, M/R LEVER DU WASHER BONDING | 1 | ||
| 109-3101369-301 | CHARGE UNIT, M/R DAMPER AND L/G SHOCK STRUT OIL CHANGE | 1 | ||
| 109-3110-03-1 | M.R. HUB ALIGNMENT | 1 | ||
| 109-3110-05-109 | PULLER,SWASHPLATE DISASSEMBLY | 1 | ||
| 109-3110-05-121 | RING ASSSY | 1 | ||
| 109-3110-05-3 | RING PULLER | 1 | ||
| 109-3110-06-1 | FLANCHE | 1 | ||
| 109-3110-06-111 | PULLER ASSY,SWASHPLATE BEARING REMOVAL | 1 | ||
| 109-3110-07-01 | SWASHPLATE DUPLEX BEARING INSTALLATION | 1 | ||
| 109-3110-07-1 | TOOL ASSY | 1 | ||
| 109-3110-08-01 | FIXTURE SMASH PLATE | 1 | ||
| 109-3110-08-1 | BASE | 1 | ||
| 109-3110-10-101 | Swashplate Positioning Tool | 1 | ||
| 109-3120-82-101 | TOOL | 1 | ||
| 109-3130-01-113 | T/R STATIC BALANCE TOOL | 1 | ||
| 109-3130-01-113 T/R | STATIC BALANCE TOOL | 1 | ||
| 109-3130-01-117 | TOOL,BALANCING,TAIL ROTOR | 1 | ||
| 109-3130-01-119 | TAIL ROTOR STATIC BALANCING TOOL | 1 | ||
| 109-3130-01-121 | Plate Assembly | 1 | ||
| 109-3130-01-125 | Spacer Assembly | 1 | ||
| 109-3130-01-129 | Spacer Assembly | 1 | ||
| 109-3130-01-13 | TAIL ROTOR BALANCING EQUIPMENT | 1 | ||
| 109-3130-01-133 | Bushing Assembly | 1 | ||
| 109-3130-01-147 | BALANCE SET, TR STATIC BALANCE | 1 | ||
| 109-3130-03-101 | TOOL | 1 | ||
| 109-3130-04-1 | PULLER, T/R AND HYDRAULIC PUMP DRIVE QUILLS REMOVAL | 1 | ||
| 109-3130-04-101 | TOOL | 1 | ||
| 109-3130-15-7 | Spacer, Sleeve | 1 | ||
| 109-3130-23-1 | TRANSMISSION DRIVE SHAFT HANGER BUSHINGS INSTALLAT | 1 | ||
| 109-3130-24-101 | Special Socket | 1 | ||
| 109-3130-26-1 | WRENCH,RING NUT REMOVAL/INSTALLATION | 1 | ||
| 109-3130-26-5 | WRENCH | 1 | ||
| 109-3130-29-1 | WRENCH ASSY | 1 | ||
| 109-3130-32-1 | WRENCH ASSY | 2 | ||
| 109-3130-34-1 | TOOL,ASSEMBLING | 1 | ||
| 109-3130-34-1-1 | AGUSTA T/R HUB BUSHING INSTL TOOLING - CUP | 1 | ||
| 109-3130-34-1-2 | AGUSTA T/R HUB BUSHING INSTL TOOLING - SHAFT | 1 | ||
| 109-3130-34-101 | T.R. HUB BUSHING INSTALLATION | 1 | ||
| 109-3130-34-3 | T/R HUB BUSHING INSTALL | 1 | ||
| 109-3130-34-5 | TOOL T/R HUB BUSHINGS INSTALLATION | 1 | ||
| 109-3130-51-101 | Tool, Rotor Brake Nut Removal/Installation | 1 | ||
| 109-3130-53-111 | TOOL ASSY | 1 | ||
| 109-3130-53-113 | Base Assembly | 1 | ||
| 109-3130-53-115 | Hook Wrench | 1 | ||
| 109-3130-53-117 | TOOL, T/R PITCH CHANGE SLIDER RING NUT REMOVAL/INSTALLATION | 1 | ||
| 109-3130-530111 | T/R SLIDERING NUT REM/INST | 1 | ||
| 109-3130-54-111 | TOOL ASSY | 1 | ||
| 109-3130-55-111 | TOOL | 1 | ||
| 109-3130-55-117 | TOOL,SLIDING REMOVAL | 1 | ||
| 109-3130-55-119 | Support Assembly | 1 | ||
| 109-3130-55-125 | Pin | 1 | ||
| 109-3130-56-101 | T/R GRIP BUSHINGS INSTALLATION/REMOVAL | 1 | ||
| 109-3130-56-109 | Tail Rotor Grip Bushing Installation | 1 | ||
| 109-3130-56-111 | TOOL ASSY, T/R GRIP BUSHING INSTALLATION | 1 | ||
| 109-3130-58-101 | EXTRACTOR,BUSHING | 1 | ||
| 109-3130-58-107 | BUSHING HALF | 1 | ||
| 109-3130-58-3107 | BUSHING HALF | 1 | ||
| 109-3130-65-101 | T/R TRUNNION LOCKING | 1 | ||
| 109-3130-66-101 | TOOL ASSY CENTERING | 1 | ||
| 109-3130-69-101 | TOOL ASSY | 1 | ||
| 109-3130-69-301 | DISPLAY TEST DAMPER | 1 | ||
| 109-3130-70-101 | CHANGE COUPLING DUPLEX | 1 | ||
| 109-3130-71-101 | TOOL ASSY | 1 | ||
| 109-3130-72-101 | Tail Rotor Grip Bushing Removal | 1 | ||
| 109-3130-73-101 | RING,BUSHINGS | 1 | ||
| 109-3130-75-101 | WRENCH, FLIGHT CONTROLS SERVO-ACTUATOR JOINT REMOVAL / INSTALLATION | 1 | ||
| 109-3130-77-117 | Flapping Stop Assembly Retainer | 1 | ||
| 109-3130-77-137 | TOOL, T/R PITCH ADJUSTMENT | 1 | ||
| 109-3130-78-101 | Tool Kit, 90° Gearbox Drive Seal Removal/installation | 1 | ||
| 109-3130-78-103 | Tool Assembly, Seal Housing Disassembly | 1 | ||
| 109-3130-78-105 | Tool Assembly, Seal Disassembly | 1 | ||
| 109-3130-80-101 | TOOL SET, 90° GEARBOX CASE CONE ASSY SEAL AND SEAL CARRIER REMOVAL/INSTALLATION - LIGA METALICA | 1 | ||
| 109-3130-80-103 | Holder Removal Tool | 1 | ||
| 109-3130-80-105 | Seal Removal Tool | 1 | ||
| 109-3130-80-107 | Seal Installation Tool | 1 | ||
| 109-3130-80-131 | 90° Gearbox Output Shaft Seal Replacement | 1 | ||
| 109-3130-81-101 | TAIL ROTOR DRIVE SHAFT SUPPORT BEARING REPLACEMENT. | 1 | ||
| 109-3130-81-103 | TOOL ASSY, FLANGE DISASSEMBLY | 1 | ||
| 109-3130-81-153 | TOOL SET, TAIL ROTOR BEARING REMOVAL/INSTALLATION | 1 | ||
| 109-3130-82-101 | TOOL SET, TAIL ROTOR CONTROL ROD BUSHING REMOVAL/INSTALLATION/BREAKOUT CHECK. | 1 | ||
| 109-3130-82-103 | Bushing Removal Tool | 1 | ||
| 109-3130-82-105 | Bushing Installation Tool | 1 | ||
| 109-3130-82-139 | KIT ATTREZZA | 1 | ||
| 109-3130-83-101 | Tail Rotor Retention Nuts Remove/Install | 1 | ||
| 109-3130-83-107 | Tool Assembly | 1 | ||
| 109-3130-83-109 | Reactor Tool | 1 | ||
| 109-3130-83-111 | Tool Assembly | 1 | ||
| 109-3130-83-125 | Reactor Tool | 1 | ||
| 109-3130-83-131 | BEARING EXTRACTOR TOOL | 1 | ||
| 109-3130-84-101 | T/R Shaft Ring Nut Removal/Install | 1 | ||
| 109-3130-84-121 | TOOL ASSY, TAIL ROTOR DRIVE SHAFT RING NUTS REMOVA | 1 | ||
| 109-3130-85-101 | TOOL | 1 | ||
| 109-3130-85-105 | Reactor Tool | 1 | ||
| 109-3130-85-107 | Wrench | 1 | ||
| 109-3130-85-109 | Base | 1 | ||
| 109-3130-85-119 | TOOL | 1 | ||
| 109-3130-85-133 | TOOL KIT, TAIL ROTOR PITCH CONTROL SHAFT BEARING R | 1 | ||
| 109-3130-85-135 | Tool Installer Assembly | 1 | ||
| 109-3130-87-101 | AW119 Tool Tail Rotor Hub Bushings Remove/Install | 1 | ||
| 109-3130-87-101/129 | A119 TAIL ROTOR BUSHING REMOVAL TOOL KIT | 1 | ||
| 109-3130-87-103 | Tool Assembly, Tail Rotor Hub Bushings Removal | 1 | ||
| 109-3130-87-105 | Tool Assembly, Tail Rotor Hub Bushings Installation | 1 | ||
| 109-3130-87-107 | Puller Assembly | 1 | ||
| 109-3130-87-113 | Plug | 1 | ||
| 109-3130-87-115 | Base | 1 | ||
| 109-3130-87-117 | Puller | 1 | ||
| 109-3130-87-119 | Plug | 1 | ||
| 109-3130-87-121 | Reaction | 1 | ||
| 109-3130-87-123 | Reaction | 1 | ||
| 109-3130-87-129 | TOOL | 1 | ||
| 109-3130-87-14 | HUB BUSHING REMOVAL | 1 | ||
| 109-3130-87-143 | TOOL, REMAINING | 1 | ||
| 109-3130-88-101 | ASS.ATT.PER | 1 | ||
| 109-3130-91-101 | TOOL | 1 | ||
| 109-3130-95-101 | TOOL | 1 | ||
| 109-3130-97-101 | TOOL | 1 | ||
| 109-3131-01-101 | TOOL ASSY | 1 | ||
| 109-3131-02-101 | TOOL SET, TR BLADE ELASTOMERIC BUSHING REMOVAL/INSTALLATION | 1 | ||
| 109-3131-02-103 | SUPPORT ASSY BLADE | 1 | ||
| 109-3131-02-141 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 109-3131-03-101 | ASS. ATTREZZ | 1 | ||
| 109-3131-03-103 | Tail Rotor Pitch Adjustment Clamping Assemblies | 1 | ||
| 109-3131-04-101 | CENTERING ASSY, LITTLE | 2 | ||
| 109-3131-80-131 | TOOL | 1 | ||
| 109-3150-58-101 | TOOL, T/R HUB BUSHING INSTALLATION AND REMOVAL | 1 | ||
| 109-31600-35-101 | TOOL | 1 | ||
| 109/3 1,8 | PIN PUNCHES | 1 | ||
| 3791093-1 | PULLER GIMBAL PIN | 1 | ||
| 3G6305G10931 | Adapter, Main Gear Box Upper Fitting Removal | 1 | ||
| 91093-1 | ET FFC | 1 | ||
| A32109-31 | Adapter | 1 | ||
| ACD21093-1 | TOOL, EMB SEAL R/I | 1 | View Images / Tech Appraisal | |
| AE1093-1 | BOITE DE COUPURE | 1 | ||
| AE1093-1A | 90-Pin Breakout Box | 1 | ||
| ALT. RBW109-3130-84-101 | 800FH | 1 | ||
| AT109-31 | FITTING | 1 | ||
| CF35109-312-500-A | TOOL | 1 | ||
| G109-310 | HORIZONTAL STABILIZER COVER (B-MODEL), WINTER USE | 1 | ||
| G109-315 | HORIZONTAL STABILIZER COVER (B-MODEL), ALL YEAR USE | 1 | ||
| HA-109-3101-58-2 | AW139 TOOL-TAPPING HAMMER | 1 | ||
| HAC-1093-1A | 90-Pin Breakout Box | 1 | ||
| NDT1093-1.27/1.02mm | Reference Standard 737 PT9 51-00-03 PG 10 FG 3, 1.27mm Top, 1.02mm Bottom | 1 | ||
| NDT1093-1.8/1.42mm | Reference Standard 737 PT9 51-00-03 PG 10 FG 3, 1.8mm Top, 1.42mm Bottom | 1 | ||
| PART OF 109-3130-58-101 | AGUSTA T/R HUB BUSHING REMOVAL TOOL - DRIVE TOOL | 1 | ||
| PWA10931 | TOOL | 1 | ||
| RBW109-3101-14-1 | Main Rotor Blade Trim Tab Gauge | 2 | ||
| RBW109-3101-22-1 | Wrench, Locking Counter Nut | 2 | ||
| RBW109-3101-58-1 | Hammer, Steel, Blade Corrosion and Voids Detection | 3 | ||
| RBW109-3101-58-2 | Hammer, Aluminum, Blade Corrosion & Voids Detection | 3 | ||
| RBW109-3101-75-10 | WRENCH, FLIGHT CONTROLS SERVO ACTUATOR JOINT REMOV | 1 | ||
| RBW109-3101-75-101 | Wrench, Flight Controls Servo Actuator Joint Removal/Installation | 2 | ||
| RBW109-3101-84-101 | Main Rotor Pitch Change Link Length/Angular Position Rigging | 2 | ||
| RBW109-3101-86-101 | Tool Assembly, Floating Ring Centering | 2 | ||
| RBW109-3101-87-113 | Tool Assembly, Main Rotor Grip Brushing Removal/Install | 2 | ||
| RBW109-3101-94-101 | Tool, Main Rotor Lever DU Washer Bonding | 1 | ||
| RBW109-3110-10-101 | Swashplate Positioning Tool | 1 | ||
| RBW109-3130-01-119 | Tail Rotor Static Balancing Tool | 2 | ||
| RBW109-3130-01-121 | Plate Assembly | 2 | ||
| RBW109-3130-01-125 | Spacer Assembly | 2 | ||
| RBW109-3130-01-129 | Spacer Assembly | 2 | ||
| RBW109-3130-01-133 | Bushing Assembly | 2 | ||
| RBW109-3130-15-7 | Spacer, Sleeve | 2 | ||
| RBW109-3130-23-1 | TRANSMISSION DRIVE SHAFT HANGER BUSHINGS INSTALLATION | 1 | ||
| RBW109-3130-24-101 | Special Socket | 1 | ||
| RBW109-3130-34-1 | Adapter, Tail Rotor Yoke Bushing Install | 2 | ||
| RBW109-3130-51-101 | TOOL QUILL RING NUT REM/ INST. | 1 | ||
| RBW109-3130-53-111 | Tail Rotor Ring Nut Tool Removal Assembly | 2 | ||
| RBW109-3130-53-113 | Base Assembly | 1 | ||
| RBW109-3130-53-115 | HOOK WRENCH | 1 | ||
| RBW109-3130-54-111 | Tail Rotor Ring Nut Removal Tool Assembly | 2 | ||
| RBW109-3130-55-117 | Tail Rotor Pitch Change Slider Removal Tool Assembly | 2 | ||
| RBW109-3130-55-119 | Support Assembly | 1 | ||
| RBW109-3130-55-125 | Pin | 2 | ||
| RBW109-3130-56-109 | TAIL ROTOR GRIP BUSHING INSTALLATION | 1 | ||
| RBW109-3130-58-101 | Tail Rotor Hub Bushings Removal | 2 | ||
| RBW109-3130-69-101 | Tail Rotor Pitch Change Housing, Duplex Bearing Install | 2 | ||
| RBW109-3130-70-101 | Tail Rotor Pitch Change Housing Duplex, Bearing Removal | 2 | ||
| RBW109-3130-71-101 | Tail Rotor Slider Install | 2 | ||
| RBW109-3130-72-101 | Tail Rotor Grip Bushing Removal | 2 | ||
| RBW109-3130-73-101 | Ring, Tail Rotor Slider Bushing Install | 2 | ||
| RBW109-3130-77-117 | Flapping Stop Assembly Retainer | 2 | ||
| RBW109-3130-78-101 | Tool Kit, 90° Gearbox Drive Seal Removal/installation | 2 | ||
| RBW109-3130-78-103 | Tool Assembly, Seal Housing Disassembly | 1 | ||
| RBW109-3130-78-105 | Tool Assembly, Seal Disassembly | 1 | ||
| RBW109-3130-80-103 | Holder Removal Tool | 1 | ||
| RBW109-3130-80-105 | Seal Removal Tool | 1 | ||
| RBW109-3130-80-107 | Seal Installation Tool | 1 | ||
| RBW109-3130-80-131 | 90° Gearbox Output Shaft Seal Replacement | 2 | ||
| RBW109-3130-82-103 | Bushing Removal Tool | 1 | ||
| RBW109-3130-82-105 | Bushing Installation Tool | 2 | ||
| RBW109-3130-82-139 | Tail Rotor Bushing Removal Tool Kit | 2 | ||
| RBW109-3130-83-101 | Tail Rotor Retention Nuts Remove/Install | 2 | ||
| RBW109-3130-83-107 | Tool Assembly | 1 | ||
| RBW109-3130-83-109 | Reactor Assembly | 2 | ||
| RBW109-3130-83-111 | Tool Assembly | 1 | ||
| RBW109-3130-83-125 | Reactor Tool | 1 | ||
| RBW109-3130-84-101 | T/R Shaft Ring Nut Removal/Install | 2 | ||
| RBW109-3130-85-105 | Reactor Tool | 1 | ||
| RBW109-3130-85-107 | Wrench | 1 | ||
| RBW109-3130-85-109 | Base | 1 | ||
| RBW109-3130-85-133 | Tool Kit, Tail Rotor Pitch Control Shaft Bearing Remove/Install | 3 | ||
| RBW109-3130-85-135 | Tool Installer Assembly | 1 | ||
| RBW109-3130-87-101 | AW119 TOOL TAIL ROTOR HUB BUSHINGS REMOVE/INSTALL | 1 | ||
| RBW109-3130-87-103 | Tool Assembly, Tail Rotor Hub Bushings Removal | 2 | ||
| RBW109-3130-87-105 | Tool Assembly, Tail Rotor Hub Bushings Installation | 2 | ||
| RBW109-3130-87-107 | Puller Assembly | 1 | ||
| RBW109-3130-87-113 | Plug | 1 | ||
| RBW109-3130-87-115 | Base | 1 | ||
| RBW109-3130-87-117 | Puller | 1 | ||
| RBW109-3130-87-119 | Plug | 1 | ||
| RBW109-3130-87-121 | Reaction | 1 | ||
| RBW109-3130-87-123 | Reaction | 1 | ||
| RBW109-3130-88-101 | Tail Rotor Hub Trunnion Centering | 2 | ||
| RBW109-3131-03-101 | Tail Rotor Pitch Adjustment Tool | 2 | ||
| RBW109-3131-03-103 | Tail Rotor Pitch Adjustment Clamping Assemblies | 1 | ||
| RBW6305G10931-3G | Adapter, Main Gear Box Upper Fitting Removal | 1 | ||
| RRT109310 | TOOL | 1 | ||
| ST932-561-1093-1-1 | ROLLER SWAGE TOOL | 1 | ||
| W880-10-931-IR | CYLINDRICAL BODY FASTENER INSTALLATION TOOLS | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
