| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1005-1 | .401 Shank Rivet Set - 10° Offset - Size: 3/32", Length: 3-1/2" | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0510-0518 | MEASURING TOOL SET | 1 | |
| 09D1005-10 | TOOLING PART | 1 | |
| 09D1005-11 | TOOLING PART | 1 | |
| 10-05102 | FLIGHT TIME CONTROL 2-1/4" TAS FROM PILOT FLISYS57P | 1 | |
| 10-05175B | TR LU BRED BRIT 29.695 KECN | 1 | |
| 10-05183A | 13 INCH PLASTIC BLACK TRIM | 1 | |
| 10-05197A | 30IN DWR TRM LTCH LVR TITA/RED | 1 | |
| 100-5-120 | TR ENGINEERING HAND PUMP | 1 | |
| 100-51125 | Pump Assembly Fixture | 1 | |
| 100-51126 | Impeller nut spanner tool | 1 | |
| 100-51127 | Impeller Shaft Wrench | 1 | |
| 100-51127PM | IMPELLER SHAFT WRENCH | 1 | |
| 100-51128 | Spline Crank | 1 | |
| 100-51129 | End Play Tool | 1 | |
| 100-51171 | Bearing Removal Tool | 1 | |
| 100-51529 | MAIN ASSEMBLY FIXTURE | 1 | |
| 100-51531 | BEARING EXTRACTION TOOL | 1 | |
| 100-51532 | SHAFT SEAL INSTALLATION TOOL | 1 | |
| 100-51533 | SHAFT SEAL INSTALLATION TOOL | 1 | |
| 100-51538 | IMPELLER NUT SPANNER TOOL | 1 | |
| 100-51777 | INHIBITING KEY - PUMP | 1 | |
| 100-51960 | Pump Assembly Fixture | 1 | |
| 100-51961 | Bearing Lock Nut Spanner Tool | 1 | |
| 100-51962 | Seal Installation Tool | 1 | |
| 100-51963 | Crank ( For Drive Shaft Spline ) | 1 | |
| 100-51964 | Ball Bearing Removal Tool | 1 | |
| 100-51965 | Bearing Removal Tool | 1 | |
| 100-51966 | Seal Removal Tool | 1 | |
| 100-51973 | Ball Bearing Installation Tool | 1 | |
| 1005-1-BAC | 3/32" "BAC" Modified Rivet Set - 3-1/2" Offset | 1 | |
| 1005-10 | .401 Shank Rivet Set - 10° Offset - Size: 1/8", Length: 13-1/2" | 1 | |
| 1005-11 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 3-1/2" | 1 | |
| 1005-11-BAC | 5/32" "BAC" Modified Rivet Set - 3-1/2" Offset | 1 | |
| 1005-12 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 5-1/2" | 1 | |
| 1005-13 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 7-1/2" | 1 | |
| 1005-14 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 10-1/2" | 1 | |
| 1005-15 | .401 Shank Rivet Set - 10° Offset - Size: 5/32", Length: 13-1/2" | 1 | |
| 1005-16 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 3-1/2" | 1 | |
| 1005-16-BAC | 3/16" "BAC" Modified Rivet Set - 3-1/2" Offset | 1 | |
| 1005-17 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 5-1/2" | 1 | |
| 1005-18 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 7-1/2" | 1 | |
| 1005-19 | .401 Shank Rivet Set - 10° Offset - Size: 3/16", Length: 10-1/2" | 1 | |
| 1005.1829268293 | 1005.18 | 1 | |
| 1005101 | CONNECTOR PRESSURE | 2 | |
| 1005133 | Crimp Tool Flynet Kit | 1 | |
| 100514-26 | 4FEET ALUMINUM LADDER | 1 | |
| 10051708 | PANEL SAW MACHINE | 1 | |
| 10051711 | BAND SAW MACHINE | 1 | |
| 10051714 | CHISEL MORTISER | 1 | |
| 101-00510 | ACCESSOIRES BARFIELD | 1 | |
| 109-3110-05-109 | PULLER,SWASHPLATE DISASSEMBLY | 1 | |
| 109-3110-05-121 | RING ASSSY | 1 | |
| 110051 | Weight St Steel Hook 1/2 oz (Class 3) | 1 | |
| 110051533 | HEAT GUN KIT STEINEL HG2320E WITH REFLECTOR & REDU | 2 | |
| 200100-51 | INSTALLATION GROUNDSTRAP | 1 | |
| 2100-5111-5 | SPRAY GUN | 1 | |
| 2151/00.51 | 2151/00.51;Adapter FC-PC FC-APC Front Shell | 1 | |
| 2471005-1 | RUDDER AND TAB RIG FIXTURE | 1 | |
| 27010-051-000 | BRACE SET ASSY | 1 | |
| 28-1005-1A | FUEL DRIPSTICK SPANNER | 1 | |
| 310051 | MDA3211-A Robotic Electric Driver (1/4 F/Hex) | 1 | |
| 332A91005110 | HOISTING BEAM | 1 | |
| 350A53-0100-5101 | THIS IS NOT A TOOL | Not Available | Not Available |
| 365A1150310051 | THIS IS NOT A TOOL | Not Available | Not Available |
| 365A91-0051-00 | SHOCK ABSORBER ASS | 1 | |
| 3791005-1 | VALVE TEST ADAPTER | 1 | |
| 429-201-005-101 | WAVING ANGLE SCHOOL DRESS TOOL | 1 | |
| 49-1005-1D | B747 A.P.U. SLING | 1 | |
| 5001005-1 | CONTAINER - 1 QUART, OIL/FUEL RESISTANT | 1 | |
| 52110051 | 7751-TORQUE TESTER JACK CABLE (not spiral) | 1 | |
| 61531-005-1 | INDICATOR | 1 | |
| 62100-5110 | Backplane Insertion Tool for Signal Contact Insertion | 1 | |
| 63041005-1 | NLG SHOCK-STRUT GLAND NUT WRENCH | 6 | |
| 63041005-1-IAS | GLAND NUT WRENCH NLG | 1 | |
| 6P1005510051CKF | HSTAB RIGGING TOOL - OPTIONAL | 1 | |
| 6P1005510051SLG | HSTAB LIFTING FIXTURE | 1 | |
| 70434410051 | LUBRICATION HOSE | 1 | |
| 734-10051-6 | COUPLING HALF SELF SEALING | 1 | |
| 734-10051-7 | COUPLING HALF SELF SEALING | 1 | |
| 85217301-005-101 | L SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-103 | L SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-105 | L SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-168 | L SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-168-001 | INSTALL TOOLL | 1 | |
| 85217301-005-168-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| 85217301-005-168-101 | L- SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-168-103 | L- SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-168-105 | L-SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-168-105 L | L- SHAPED INSTALLATION TOOL | 1 | |
| 85217301-005-168-129 | ANCHOR NUT REMOVAL | 1 | |
| 900G3441005-101 | Notar Fan Bearing Regreasing Tool | 1 | |
| 92700-10051-041 | MRH LIFTING SLING | 1 | |
| 98L10001005100 | CALE POINT FIXE TP CHOCK WHEEL-RUN UP | 1 | |
| 98L10001005101 | CALE POINT FIXE TP CHOCK WHEEL-RUN UP | 1 | |
| 98L10001005102 | CALE POINT FIXE TP CHOCK WHEEL-RUN UP | 1 | |
| 98L10001005116 | CALE POINT FIXE TP CHOCK WHEEL-RUN UP | 1 | |
| 98L10001005118 | CALE POINT FIXE TP CHOCK WHEEL-RUN UP | 1 | |
| 98L32101005100 | EXTRACTEUR AXE H | 1 | |
| 98L32101005102 | EXTRACTEUR AXE J | 1 | |
| 98L32101005104 | EXTRCT. BOITE A GRAISSE | 1 | |
| 98L32101005106 | STORAGE BOX | 1 | |
| 98L32201005100 | EXTRACTOR AXIS | 1 | |
| A-10051 | 616-015-RDPL INTELLIPORT RFID | 1 | |
| A31005-1 | TEST BOX - NOISE, WARNING ELECTRONIC UNIT (WEU) POWER SUPPLY | 1 | |
| A31005-14 | TEST BOX - NOISE, WARNING ELECTRONIC UNIT (WEU) POWER SUPPLY | 1 | |
| A31005-15 | A31005-14 SUPPLY NOISE TESTER | 1 | |
| A51005-1 | TOOL | 1 | |
| A51005-14 | OIL CAN GAGE - PRESSURE BULKHEAD | 1 | |
| A51005-14-M | OIL CAN GAUGE | 1 | |
| A51005-15 | TOOL | 1 | |
| A71005-10 | Nut | 2 | |
| A71005-10-INC | -10 NUT (LESS PLATING) | 1 | |
| A71005-11 | Washer | 2 | |
| A71005-11-INC | -11 WASHER (LESS PLATING) | 1 | |
| A71005-15 | ATTACH LUG | 1 | |
| A71005-15-CM | 025THK A36 | 1 | |
| A71005-18 | SPREADER BAR ASSY | 1 | |
| AGE10051 | ASSEMBLY PUSHER | 1 | |
| AT1100-51 | SPRING | 1 | |
| AURCS100-.514 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .514"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B21005-1 | CLEANING WAND EQUIPMENT - HEAT EXCHANGER | 6 | |
| B21005-10 | CLEANING WAND EQUIPMENT - HEAT EXCHANGER | 10 | |
| B21005-10-M | MFD PARTS FOR -10 | 1 | |
| B21005-11 | CLEANING WAND EQPT | 1 | |
| B21005-12 | EXTENTION ASSY | 1 | |
| B21005-13 | Guard | 1 | |
| B21005-14 | Nozzle | 1 | |
| B21005-15 | PLACARD | 1 | |
| B21005-16 | STORAGE BOX | 1 | |
| B71005-1 | TOOL | 1 | |
| B71005-10 | PIN&STREAMER ASSY | 6 | |
| B71005-11 | WRENCH ASSY | 7 | |
| B71005-12 | TOOL | 1 | |
| B71005-13 | LUG | 1 | |
| B71005-19 | TOOL | 1 | |
| C21005-1 | Hoist Adapter - Air Conditioning Pack | 4 | |
| C21005-1-M | MFD PARTS FOR -1 | 1 | |
| C21005-1/70 | HOIST ADAPTER - AIR CONDITIONING PAC | 1 | |
| C21005-10 | COLLAR | 1 | |
| C21005-11 | SLEEVE | 1 | |
| C21005-12 | HINGE ROD | 1 | |
| C21005-13 | LEAD SCREW | 1 | |
| C21005-14 | PIVOT BODY | 1 | |
| C21005-15 | PIVOT SPACER | 1 | |
| C21005-16 | PIVOT,UPPER | 1 | |
| C21005-17 | PIVOT PLATE | 1 | |
| C21005-18 | BOLT | 1 | |
| C21005-19 | NUT | 1 | |
| C26942100-519 | CROSS BRACE END BRACKET | 1 | |
| C71005-1 | ALIGNMENT GUIDE-CONE BOLT | 1 | |
| C71005-16 | STRAP | 1 | |
| EMA84-10-05-1 | DIGITAL MANOMETER 0-10 kPa 0-100 mbar | 5 | |
| EMA84-10-05-1-T | MANOMETER | 1 | |
| G21005-1 | MUFFLER - EXHAUST, COOLING FAN, ELECTRICAL/ELECTRONIC BAY | 1 | |
| G601R321005-17 | STOP | 1 | |
| G601R321005−1 | Extractor − MLG Pintle Pin | 6 | |
| GSE5100516 | DIGITAL THERMOMETER | 1 | |
| HA 1601-00514-6807-6011 | TRONAIR (USA) THE DEVICE FOR CHARGING AMORTSTOCK WITH NITROGEN | 1 | |
| IAE1F10051 | SLING, TWO CABLES (WIDE) | 4 | |
| J51005-1 | INSTALLATION/REMOVAL ADAPTER, FUSELAGE DRAIN VALVE | 4 | |
| J71005-1 | BOOTSTRAP EQUIP | 1 | |
| J71005-115 | Snapper pin | 1 | |
| J71005-18 | SLING EQUIPMENT | 1 | |
| K71005-1 | TRANSPORTATION EQUIPMENT - ENGINE MOUNT STABILIZATION, ROLLS ROYCE | 5 | |
| L620M1810051 | OPT BLADE TRACKER | 1 | |
| M622U1005103 | Main Rotor Head Sling | 1 | |
| M632V1005102 | Main Gear Box Support Stand | 1 | |
| OET14100512 | COMPOUND ACTION STRAIGHTHANDLE | 1 | |
| OU100514T100873 | RIGGING PIN | 1 | |
| PCL100512MM-HA-R | FLASH CARD PCMCIA 512MB | 2 | |
| PF51-005-1 | KIT HOIST APU FISHPO | 2 | |
| PWA 100518 | BENDER, PNEUMATIC (INITIAL BEND, OPTIONAL TO PWA 104726) | 1 | |
| PWA 100519 | BENDER, PNEUMATIC (FINAL BEND, OPTIONAL TO PWA 104727) | 1 | |
| RBEM622U1005103 | Main Rotor Head Sling | 1 | |
| RBEM632V1005102 | Main Gear Box Support Stand | 1 | |
| RBW6205G10051-3G | Pin | 1 | |
| RRT100518 | TOOL | 1 | |
| RRT100519 | TOOL | 1 | |
| RSE1005-1 | SLING FAN RESERVER | 1 | |
| SCC-100-5/16 | 100 Degree "Suicide" Countersink Cutter, 5/16" Diameter | 1 | |
| SP510051 | ANVIL | 1 | |
| T-100-5/16 | BENDER STTUBE HND ACUATE 5/16" | 1 | |
| T-140100518 | PLAS TL CS, BLK, 13.5X10X5.5 | 1 | |
| T1-005-1 | Tube Bender | 1 | |
| TECH2R100 (5-100 FT/LB) | Torque Wrenches | 1 | |
| TF1005-144 | HOSE: BOSTFLEX,BLK,1IN ID, NO LONGER AVAILABLE | 1 | |
| TF1005120 | HOSE: BOSTFLEX,BLK,1IN ID, NO LONGER AVAILABLE | 1 | |
| TF100513-0 | HOSE: BOSTFLEX,BLK,1IN ID, NO LONGER AVAILABLE | 1 | |
| TF100518-0 | HOSE: BOSTFLEX,BLK,1IN ID, NO LONGER AVAILABLE | 1 | |
| VSA-RF100-5116A-INTFC | VSA-RF100-5116A-INTFC;VSA-RF100 Interface for ISS-5116A Selector Switch | 1 | |
| WMP1005-1 | SF6 SWIVEL BOTTLE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
