| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1002-7 | .401 Shank Rivet Set - Straight - Size: 1/8", Length: 5-1/2" | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) J71002-75 | Torque Eqpt. Engine Mount bolts (CALIBRATION) (CALIBRATION) | 1 | ||
| 00510-027-000 | HOSE-HIGH PRESSURE, | 1 | ||
| 0210027060 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 0292100270 | ADAPTATOR ASSY | 1 | ||
| 03010027 | 50.27-1/2DR x 27mm SOCKET BI-HEX | 1 | ||
| 03110027 | 54.TXB.T.27-1/2DRxT27 TAMPER TORX DR SKT | 1 | ||
| 05010027 | 55.27-3/4DR x 27mm HEX SOCKET | 1 | ||
| 10-02775D | TR HG SLVR BRIT 37.624 KEBN | 1 | ||
| 1002-774 | PROBE SWITCH REMOTE | 1 | ||
| 100270 | CABLE: CHARGING UNIVERSAL (PANEL MOUNT), | 1 | ||
| 100270-RFX | JACK WEIGH AC100 RFX 3-150 KIT-3 - 50,000LB (25,000KG) CAPACITY LOAD CELLS | 1 | ||
| 100273 | CABLE: CHARGING MD500, | 1 | ||
| 100275 | TOOL | 1 | View Images / Tech Appraisal | |
| 100276 | TOOL | 1 | View Images / Tech Appraisal | |
| 100277 | TOOL | 1 | View Images / Tech Appraisal | |
| 100277 (JW50) | LOAD CELL FOR WEIGHING | 1 | ||
| 101-00275 | CABLE, | 1 | ||
| 105-810027-1 | SPACER, LDG GEAR ASSY. | 1 | ||
| 105-810027-3 | SPACER | 1 | ||
| 210027 | TUBE | 1 | ||
| 2100275 | R080-043-045SW115-50 S5 B/SCOPE KIT | 1 | ||
| 23010027 | 50.IMP.27-1/2DR x 27mm HEX IMPACT SOCKET | 1 | ||
| 25010027 | 55.IMP.27-3/4DR x 27mm HEX IMPACT SOCKET | 1 | ||
| 26010027 | 60.IMP.27-1DR x 27mm HEX IMPACT SOCKET | 1 | ||
| 3010027 | 1/2DR x 27mm SOCKET BI-HEX | 1 | ||
| 310027 | MDH3201-A Right Angle Electric Driver (1/4 F/Hex) | 1 | ||
| 3110027 | 1/2DRxT27 TAMPER TORX DR SKT | 1 | ||
| 330997F10-0270 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 351-6100-27GSE | TRANSLATING SLEEVE SLING | 1 | ||
| 410027-02 | BATTERY-FOR USM 35X | 1 | ||
| 5010027 | 3/4DR x 27mm HEX SOCKET | 1 | ||
| 731/100.27 | 27mm OPEN END INSERT TOOL 2228 | 1 | ||
| 732/100.27 | 27mm RING INSERT TOOL 22X28 | 1 | ||
| 810-0278-007 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 97300E11-0027-00 | MAIN BLADE HANDING TROLLEY | 1 | ||
| A1002-7 | POLE ASSY | 1 | ||
| A51002-7 | BLOCK | 1 | ||
| AGE10027 | DIFFERENTIAL SPLITTER | 2 | ||
| AO100278 | Pressing-out Mandrel | 1 | ||
| AO100278PM | PRESSING-OUT MANDREL | 1 | ||
| AT100-27 | PINION | 1 | ||
| C21002-7 | AIR START COUPLER | 1 | ||
| C71002-7 | Base Assy | 1 | ||
| C71002-77 | BLOCK PULLEY | 4 | ||
| C71002-78 | "A" frame assy | 1 | ||
| CE100270C0901 | THIS IS NOT A TOOL | Not Available | Not Available | |
| CE100272-03 | EXTRACTOR | 1 | ||
| CE100273-04 | EXTRACTOR | 1 | ||
| CH1541-0027 | Guide-Split | 1 | ||
| EEBC100-27 | FAN CONTROL BOARD | 1 | ||
| EF-100-27 | THIS IS NOT A TOOL | Not Available | Not Available | |
| G1002700001-057 | BEARING REMOVAL INSTALLATION KIT | 1 | ||
| G1002710030-001 | AILERON NEUTRAL CLAMP | 2 | ||
| G1002711020-001 | RVDT TEST BOX | 1 | ||
| G1002711020-005 | TESTER, RVDT TEST BOX | 1 | ||
| G1002711021-001 | AILERON LIFTING SLING | 1 | ||
| G1002711040-001 | FIXTURE ASSY, CONTROL COLUMN TEST | 1 | ||
| G1002711040-001-REVA | CONTROL COLUMN TEST FIXTURE | 1 | ||
| G1002711040-031-REVA | POINTER | 1 | ||
| G1002712037-001 | BOARD, GEAR TAB RIG | 1 | ||
| G1002712038-001 | BOARD, TRIM TAB RIG | 2 | ||
| G1002720039-001 | Aileron Neutral Bar | 1 | ||
| G1002720042-051-REVD | RIG PIN | 1 | ||
| G1002720042-055 | RIG PIN | 1 | ||
| G1002720042-057 | PIN, RIGGING | 1 | ||
| G1002720042-059-REVD | RIG PIN | 1 | ||
| G1002720042-063 | RIGGING PIN KIT | 2 | ||
| G1002720042-063-REVD | KIT RIG PIN | 1 | ||
| G1002720042-065-REVD | RIG PIN | 1 | ||
| G1002720045-001 | RUDDER NEUTRAL BAR | 1 | ||
| G1002720046-001 | KIT, CFMS, SENSOR VALIDATION | 2 | ||
| G1002720047-001 | KIT, RUDDER RIGGING | 1 | ||
| G1002720048-001 | TESTER, RUDDER TRIM ACTUATOR CNTRL BOX | 1 | ||
| G1002721005-001 | Mcv Hole Rework Kit | 1 | ||
| G1002721006-001 | FIXTURE, RUDDER, BACKLASH | 1 | ||
| G1002721033-001 | GUST LOCK HANDLE ADAPTER | 1 | ||
| G10027240001-001 | RUDDER SLING | 1 | ||
| G1002724001-001 | Rudder Handling Fixture | 1 | ||
| G1002730043-001 | Elevator Neutral Bar | 1 | ||
| G1002730044-001 | HARNESS, COLUMN POSITION TEST | 1 | ||
| G1002730045-001 | KIT, ELEVATOR | 1 | ||
| G1002731001-001 | TOOL KIT, ELEVATOR BALANCING FIXTURE | 1 | ||
| G1002733001-001 | RESTRAINING PIN ASSY. HYDRAULIC LOCL-OUT ROD | 1 | ||
| G1002740053-009 | SPACER, PITCH DISCONNECT RIGGING | 1 | ||
| G1002740054-001 | GAUGE, HSTA | 1 | ||
| G1002743001-001 | NO BACK TEST KIT | 1 | ||
| G1002750001-001 | GAUGE, FLAP ACTUATOR STOP OUTBD | 1 | ||
| G1002750002-001 | Inbd Flap Actuator Stop Gauge | 1 | ||
| G1002750002-007 | GAUGE, FLAP ACTUATOR STOP INBD | 1 | ||
| G1002752001-001 | Grease Gun Assy (Superceeded By Gwktbb-300) | 1 | ||
| G1002760001 | GSE, SPOILER BLOCKS | 1 | ||
| G1002760001-023 | BLOCKS, SPOILER, GSE | 2 | ||
| G670282100-27 | TOOL | 1 | ||
| G71002-7 | TOOL | 1 | ||
| G71002-7X | PIN | 1 | ||
| GER31002736 | VITAL POCKET FOLDER | 1 | ||
| GER31002739 | VITAL POCKET FLDR RPLCMT BLDS | 1 | ||
| GSE5100271 | TORQUE WRENCH, 40 - 200 INCH-POUNDS (4.52 - 22.6 NM) | 1 | ||
| I7810027 | FORCE GAUGE DIGITAL | 1 | ||
| IAE 1F10027 | IAE 1F10027 HEATER CONTROL UNIT | 1 | ||
| IAE6F10027 | HEATER CONTROL UNIT | 1 | ||
| J51002-7 | PLATFORM - SERVICE, FORWARD APU FIREWALL | 4 | View Images / Tech Appraisal | |
| J71002-7 | Washer | 1 | ||
| J71002-74 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT GE90 | 1 | ||
| J71002-75 | TORQUE EQUIPMENT - ENGINE MOUNT BOLT GE90 | 2 | ||
| J71002-76 | Aft torque assy | 1 | ||
| J71002-77 | Hex Bolt | 1 | ||
| J71002-78 | Hex Bolt | 1 | ||
| J71002-79 | EXTENSION BAR (IM92A) | 1 | ||
| K47100-27 | KIT, MODSUM 4-114052 | 1 | ||
| K51002-7 | PLATFORM-SERVICE FORWARD APU FIREWALL | 1 | ||
| K71002-70 | RIGHT HAND ROD FITTING | 1 | ||
| K71002-71 | Pin | 1 | ||
| K71002-73 | ROD FITTING | 1 | ||
| K71002-74 | Pin | 1 | ||
| K71002-76 | Safety pin | 1 | ||
| K71002-78 | FWD HOLD OPEN STRUT | 1 | ||
| K71002-79 | ROD END (RH) | 1 | ||
| MT002-CE100272-003 | TORQUE ADAPTER | 1 | ||
| MT002-CE100273-003 | TORQUE ADAPTER | 1 | ||
| MTAX01-CE100270-2501 | casquillo | 1 | ||
| MTAX01CE100270- 2301 | TORQUE | 1 | ||
| MTAX01CE100270- 2401 | TORQUE WERENCH | 1 | ||
| MTAX01CE100270-0101 | TORQUE ADAPTOR | 1 | ||
| MTAX01CE100270-230 | TORCOMETRIC ADAPTER | 1 | ||
| MTAX01CE100272-0003 | Llave apriete | 1 | ||
| MTAX01CE100273-0003 | Llave de apriete | 1 | ||
| MTOO02-CE100270-0003 | util | 1 | ||
| MTOO02-CE100272-0003 | TORQUE ADAPTOR | 1 | ||
| MTOO02-CE100273-0003 | TORQUE ADAPTOR | 1 | ||
| MTOO10-CE100272-0005 | Util montar bola | 1 | ||
| MTOO10-CE100273-0005 | Util montar bola | 1 | ||
| PRHI01-CE100270-07 | Maqueta by pass | 1 | ||
| PRHI01-CE100270-08 | Maqueta de indicador de colmatacion | 1 | ||
| PRHI01-CE100270-09 | Maqueta de filtro | 1 | ||
| PRHI01-CE100270-10 | Maqueta de filtro | 1 | ||
| PRHI01-CE100272-0003 | racord | 1 | ||
| PRHI01-CE100273-0005 | racord | 1 | ||
| refurbish and upgrade J71002-57 to J71002-75 | Torque eqpt-engine mount bolts，GE90 | 1 | ||
| S1201002700000 | RAM AIR COVER ASSY | 1 | ||
| S1201002700100 | RAM AIR COVER ASSY | 1 | ||
| S1201002700400 | COVER ASSY | 1 | ||
| S1201002700500 | COVER ASSY | 1 | ||
| SP510027 | ROTOR | 1 | ||
| WS9100270190 | AB360/338 CYLINDER GASKET | 1 | ||
| WS9100270210 | AB360/338 HEAD GASKET | 1 | ||
| МТАХ01СЕ100270-2301 | TORQUE ADAPTOR | 1 | ||
| МТАХ01СЕ100270-2401 | TORQUE ADAPTOR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
