| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1002-2 | .401 Shank Rivet Set - Straight - Size: 3/32", Length: 5-1/2" | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) C21002-24 | REVERSE FLUSHER EQUIPMENT - HEAT EXCHANGER (CALIBRATION) | 1 | ||
| (CALIB) K71002-21 | 6 Ton Hoist (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) P7-0100224 | TEST SET TU14 (CALIBRATION) | 1 | ||
| 01410022 | 40.A.11/32-1/4DR x 11/32" HEX SOCKET | 1 | ||
| 02010022 | 45.22-3/8DR x 22mm SOCKET BI-HEX | 1 | ||
| 02110022 | 456.22-3/8DR x 22mm HEX SOCKET | 1 | ||
| 02410022 | 45.A.11/32-3/8DR x 11/32" SOCKET BI-HEX | 1 | ||
| 0292100220 | ONE-PIECE REAR PLATE | 1 | ||
| 03010022 | 50.22-1/2DR x 22mm SOCKET BI-HEX | 1 | ||
| 05-7024-1100-22 | OPTION: HE, | 1 | ||
| 05-7025-1100-22 | OPTION: HE, | 1 | ||
| 05-7052-1100-22 | OPTION: HEAVY DUTY TRAILER, | 1 | ||
| 05010022 | 55.22-3/4DR x 22mm HEX SOCKET | 1 | ||
| 10-02275B | TR CS BRED BRIT 37.75 EPIQ | 1 | ||
| 10-02297A | 38IN DWR TRM LATCH LVR SBLU | 1 | ||
| 10-10022 | Bowers Granite Table 1800x900x200mm Grade 1 | 1 | ||
| 10/02/2931 | TOW BAR - 6 STEPS STAIRS | 1 | ||
| 1002-20 | .401 Shank Rivet Set - Straight - Size: 3/16", Length: 13-1/2" | 1 | ||
| 1002-21-BAC | 1/4" "BAC" Style Modified Rivet Set - 3-1/2" Straight | 1 | ||
| 1002-22 | .401 Shank Rivet Set - Straight - Size: 1/4", Length: 5-1/2" | 1 | ||
| 1002-23 | .401 Shank Rivet Set - Straight - Size: 1/4", Length: 7-1/2" | 1 | ||
| 100224 | TOOL | 1 | ||
| 1002256-110 | BL11 CDS SOFTWARE | 1 | View Images / Tech Appraisal | |
| 1002256-80 | CD ROM | 1 | ||
| 10022626 | SONDICATOR PROBE (FOR ULTRASOUND) 1.25-IN SONDICATOR CONTACT PROBE WITH 1/2-IN SPACING REPLACEABLE TORLON PROBE TIPS, 2-PIECE PLASTIC ELEMENTS,AND ALARM INDICATING LIGHT FOR USE WITH S-21R & MIZ-21SR INSTRUMENTS. 8 FT CABLE LENGTH. (MADE BY ZETEC INC.) | 1 | ||
| 101-00220 | MANUAL, | 5 | ||
| 1010022561 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 11002-2 | 11002-2 | 1 | ||
| 1410022 | 1/4DR x 11/32" HEX SOCKET | 1 | ||
| 1901002-2 | INDENTER; SOLISTRAND | 1 | ||
| 2010022 | 3/8DR x 22mm SOCKET BI-HEX | 1 | ||
| 2110022 | 3/8DR x 22mm HEX SOCKET | 1 | ||
| 21C3110-022 | ROTOR BLADE GAGE | 1 | ||
| 23010022 | 50.IMP.22-1/2DR x 22mm HEX IMPACT SOCKET | 1 | ||
| 2410022 | 3/8”SHALLOW SOCKET 12PT 11/32” | 1 | ||
| 25010022 | 55.IMP.22-3/4DR x 22mm HEX IMPACT SOCKET | 1 | ||
| 27010-022-000 | BRACE SET ASSY | 1 | ||
| 30011-00220 | BEZEL WITH SCREW | 1 | ||
| 3010022 | 1/2DR x 22mm SOCKET BI-HEX | 1 | ||
| 310022 | MDP3236-Q/D Pistol Grip Electric Driver (3/8 Sq. Dr.) | 1 | ||
| 332A91002200 | STEERING BAR | 1 | ||
| 44-1002-24 | Pressure regulator | 1 | ||
| 5.41.6100.2200.00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 5010022 | 3/4DR x 22mm HEX SOCKET | 1 | ||
| 619-111-0022 | GAUGE 250 LB PW4000 TOOL | 1 | ||
| 62100-2200 | Manual Press with IDT Ribbon Cable Tool Kit | 1 | ||
| 63001002-2 | LOCKNUT TORQUE TOOL | 1 | ||
| 70210022 | HEEL DOLLY | 1 | ||
| 7100228449 | 3M 051115-66520 Cubitron II Black 4 x .06 x 38 Type 1 Cut-Off Wheel | 1 | ||
| 7100229881 | 3M 051131-01988 Black 3 x 116 x 38 General Purpose Cut-Off Wheel | 1 | ||
| 7100229882 | 3M 051131-01987 Black 3 x 0.04 x 38 General Purpose Cut-Off Wheel | 2 | ||
| 79000D92001010022 | HYDRAULIK KABEL | 1 | ||
| 9421002200 | SINGLE ALTERNATOR | 1 | ||
| 98F09101002226 | TOOL | 1 | ||
| 98F09101002228 | TOOL | 1 | ||
| 98F09101002230 | TOOL | 1 | ||
| 98F09101002232 | TOOL | 1 | ||
| 98F09101002242 | TOOL | 1 | ||
| 98F27501002222 | TOOL | 1 | ||
| 98F32301002208 | MANDATORY SIGN | 1 | ||
| 98F32301002210 | MANDATORY SIGN | 1 | ||
| 98F54001002206 | SCREW | 1 | ||
| 98F54001002218 | TOOL | 1 | ||
| 98L10001002200 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002201 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002202 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002204 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002206 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002208 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002210 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002212 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L10001002214 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | ||
| 98L29101002200 | CHARIOT | 1 | ||
| 98L29101002210 | DUST FILTER ATTACHME | 1 | ||
| 98L29101002222 | ADAPTOR SEAL | 1 | ||
| 98L29101002224 | MANDATORY SIGN | 1 | ||
| 98L29101002226 | MANDATORY SIGN | 1 | ||
| 98L32101002200 | EXTRACTOR NUT | 1 | ||
| 98L32101002202 | FORK | 1 | ||
| 98L32101002204 | DELRIN PROTECTION | 1 | ||
| 98L32101002206 | SPECIAL SCREW A | 1 | ||
| 98L32101002208 | SPECIAL NUT A | 1 | ||
| 98L32101002210 | BEARING BELL AXIS A | 1 | ||
| 98L32101002212 | REMOVABLE CRANK | 1 | ||
| 98L32101002214 | BEARING BELL AXIS B | 1 | ||
| 98L32101002216 | DELRIN PROTECTION | 1 | ||
| 98L32101002218 | BELL HOUSING INTERFACE | 1 | ||
| 98L32101002220 | CLEVIS PIN | 1 | ||
| 98L32101002222 | SCREW HEAD | 1 | ||
| 98L32101002224 | BALLS SCREW | 1 | ||
| 98L32101002226 | SPECIAL SCREW B | 1 | ||
| 98L32101002228 | SPECIAL NUT B | 1 | ||
| 98L32201002231 | PLATE | 1 | ||
| 98L32301002204 | HOOK COMPL. | 1 | ||
| 98L32301002206 | PROTECTIVE PLATE | 1 | ||
| 98L34001002200 | LEFT BODY | 1 | ||
| 98L34001002202 | RIGHT BODY | 1 | ||
| 98L34001002204 | SCREW | 1 | ||
| 98L34001002206 | SUPPORTING WASHER | 1 | ||
| 98L34001002208 | THIN STRIP | 1 | ||
| 98L34001002210 | KNURLING BUTTON M4 | 1 | ||
| 98L34001002212 | DESCRIPTION LABEL | 1 | ||
| 98L34001002214 | LTD FOAM | 1 | ||
| 98L34001002216 | BOTTOM FOAM | 1 | ||
| 98L71201002200 | PROTECTION BIELLES | 1 | ||
| 98V10001002208 | THIS IS NOT A TOOL | Not Available | Not Available | |
| A-10022 | 714-001-RDPL AUTOLOCKER FX 75" | 1 | ||
| A21002-2 | INSTL/REML TOOL | 1 | ||
| A21002-24 | TOOL | 1 | ||
| A51002-2 | ALIGNMENT EQUIPMENT | 1 | ||
| A71002-2 | SLINR T/R | 1 | ||
| A71002-20 | AFT ADAPTER ASSY | 1 | ||
| A71002-22 | SLING - THRUST REV. | 1 | ||
| A71002-26 | TOOL | 1 | ||
| AGE10022 | SPLIT BUSHING | 1 | ||
| AT100-22H | INLET BUSHING | 1 | ||
| AURCS100-.223 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .223"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| B100-220 | OUTBOARD WING & CENTER SECTION WING COVERS, ALL YEAR USE (set of 2) | 1 | ||
| B21002-22 | TEST EQUIP-CABIN PRESS. AIR SEALS | 2 | ||
| B861-08010022 | VOLTMETER 0-40VDC 72MM2 | 1 | ||
| C21002-20 | REVERSE FLUSHER EQUIPMENT - HEAT EXCHANGER | 10 | ||
| C21002-20-M | REVERSE FLUSHER EQPT | 1 | ||
| C21002-21 | REVERSE FLUSHER ASSY | 1 | ||
| C21002-24 | REVERSE FLUSHER EQUIPMENT - HEAT EXCHANGER | 16 | View Images / Tech Appraisal | |
| C21002-24-M | REVERSE FLUSHER EQPT | 1 | ||
| C21002-25 | SHAFT ASSY | 1 | ||
| C71002-2 | Boom assy | 1 | ||
| C71002-2,-78,83 | BOOM ASSY A FRAME | 1 | ||
| C71002-235 | BOOTSTRAP HOIST - CFM56-3 ENGINE | 1 | ||
| C71002-247 | THRUST REVERSER & COWLING HANDLING EQUIPMENT | 1 | ||
| C710022-6 | MOUNT NUT WRENCH | 1 | ||
| CS-AGE-31100-22 | FILTRO | 1 | ||
| D2137100220400 | THIS IS NOT A TOOL | Not Available | Not Available | |
| DMC1002-24 | Safe-T-Cable Tool Kit | 2 | ||
| DP0T000D10022649 | VSV RIGGING PUMP | 1 | ||
| G21002-26 | TEST EQUIPMNT | 1 | ||
| G71002-25X | BLOCK | 1 | ||
| G71002-27X | HOUSING | 1 | ||
| G71002-28X | PIN | 1 | ||
| G710022-1 | HOLD OPEN EQPT | 1 | ||
| GSB710022 | NACELL MOUNTED ENGINE STAND | 1 | ||
| HA-T100220-1 | SLING ASSEMBLY | 1 | ||
| HF30GS 4-100-22 | PL.M.D. MILLING CUTTER DIAM 10.0MM WITH REC Z=4 | 1 | ||
| IAE1F10022 | JACK, HYDRAULIC | 6 | ||
| IM3100-22 | TRIGGER VALVE SEAT | 1 | ||
| IM5100-22A | TRIGGER VALVE SEAT | 1 | ||
| IM6100-22 | VALVE SEAT | 1 | ||
| J209-01-002-25 | KEY, | 1 | ||
| J71002-20 | Spring Pin | 1 | ||
| J71002-25 | Reaction tube | 1 | ||
| J71002-26 | Slide tube | 1 | ||
| J71002-27 | DYNAMOMETER LINK ASSY | 1 | ||
| K10022257 | MANIPULATOR | 1 | ||
| K10022262 | RADIUSED SHOE | 1 | ||
| K51002-2 | PLATFORM-SERVICE FORWARD APU FIREWALL | 1 | ||
| K71002-2 | FWD center beam assy | 1 | ||
| K71002-20 | TORQUE MULTIPLIER | 3 | ||
| K71002-21 | 6 ton hoist | 1 | ||
| K71002-22 | LOAD CELL SYSTEM | 3 | ||
| K71002-25 | Shallow socket，15/16" | 1 | ||
| K71002-26 | EXTENSION，16" | 1 | ||
| K71002-27 | CENTER BEAM | 1 | ||
| K71002-28 | Attach pad | 1 | ||
| K71002-29 | Attach pad | 1 | ||
| K71002-2X | 1 | |||
| MIT-1544100-22 | ADAPTEER (PART OF MIT-1544100) | 1 | ||
| MTOO01 CE100220-03 | Dummy | 1 | ||
| MTOO01-CE100220-0001 | Util montaje | 1 | ||
| MTOO11-CE100221-0005 | Soporte montar válvulas | 1 | ||
| MTOO12-CE100221-0005 | Soporte celula de carga | 1 | ||
| NK1002238-20 | THIS IS NOT A TOOL | Not Available | Not Available | |
| PTPPR10-022 | TUBE (265MM) | 1 | ||
| PWA100221 | ADAPTER SUPPORT | 1 | ||
| QTFR210022 | BRASS SPACER | 1 | ||
| RBT100220-1 | SLING CABLE TYPE | 2 | ||
| SK601R-10022 | STANDARD CALIBRATION | 1 | ||
| SNXPR10-022 | 10.43"(265MM) TUBE | 1 | ||
| SP510022 | FRONT END PLATE | 1 | ||
| SPOO01-CE100220-0001 | soporte | 1 | ||
| ST100220 | SLING ASSEMBLY, ENGINE TRANSMIS- | 1 | ||
| T100220 | LIFTING SLING | 2 | ||
| T100220-1 | Sling (Cable Type) | 1 | ||
| T100222 | DG STAND HEBER | 1 | ||
| TAB10022 | RAD ADAP VW AUDI PORSCHE | 1 | ||
| TAB10022G | GASKET | 1 | ||
| TAB10022V | VACUUM HOLDING ADP 48MM X 3MM | 1 | ||
| TF1002240 | HOSE: DUMP, | 1 | ||
| TQFR100-22 | GEAR | 1 | ||
| U8010022 | PROBE KIT | 1 | ||
| WCI-737-47-1002-24-2-N | EXPENDABLE TOOLING COLD WORK | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
