| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10018 | RIVET SET KIT 5 PCS INCLUDING 1” FLUSH RIVET SET | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 101-00184 | PITOT STATIC TEST SET (CALIBRATION) | 3 | |
| (CALIB) J21001-82 | HX Adapter assy. (CALIBRATION) (CALIBRATION) | 1 | |
| 00510-018-000 | SOCKET WRENCH ELEMEN | 1 | |
| 01410018 | 40.A.9/32-1/4DR x 9/32" HEX SOCKET | 1 | |
| 02-3750-100-1875 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-4050-100-1875 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-5000-100-1875 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02010018 | 45.18-3/8DR x 18mm SOCKET BI-HEX | 1 | |
| 02110018 | 456.18-3/8DR x 18mm HEX SOCKET | 1 | |
| 0292100180 | REAR PLATE | 1 | |
| 03010018 | 50.18-1/2DR x 18mm SOCKET BI-HEX | 1 | |
| 08771-0018(0-6000LBS) | DYNAMOMETER 0-6000 LBS | 1 | |
| 08771-0018(0-8000LBS) | DYNAMOMETER 0-8000 LBS | 1 | |
| 10-01823 | DYNON OAT PROBE D180 D100 D60 D10A D6 | 1 | |
| 10-01875B | TR CC SBLU BRIT 37.75 EPIQ | 1 | |
| 10-01897A | 62IN DWR TRM LATCH LVR BR RED | 1 | |
| 10018506G950 | JEPPVIEW G950 MFD FLIGHT CHARD ANNUAL SUBSCRIPTION | 1 | |
| 101-00184 | PITOT STATIC TEST SET | 1 | |
| 101-00184-425 | PITOT STATIC TEST-SET, | 1 | |
| 101-00184-433 | PITOT STATIC TEST SET | 1 | |
| 101-00184-445 | PITOT STATIC TEST SET | 3 | |
| 101-00184-463 | TEST SET: ANLG P/S, | 4 | |
| 101-00184-465 | TESTER: PITOT, | 1 | |
| 101-00184-635 | PITOT STATIC TEST | 2 | |
| 101-00184-665 | TESTER: PITOT,60-420KTS,2KFT/M, W/2 25FT HOSES & ADAPTERS | 1 | |
| 101-00184-A0A | BARFIELD PITOT STATIC TESTER 1811HA | 4 | |
| 101-00185 | TOOL | 1 | |
| 101-00185-163 | PITOT STATIC TEST SET | 1 | |
| 101-00185-423 | Pitot Static Test Set | 1 | |
| 101-00185-425 | PITOT STATIC TEST SET | 2 | |
| 101-00185-433 | Pitot Static Test Set | 1 | |
| 101-00185-435 | PITOT STATIC TEST SET | 1 | |
| 101-00185-443 | Pitot Static Test Set | 1 | |
| 101-00185-445 | PITOT STATIC TEST SET | 1 | |
| 101-00185-445 (1811GA445) | PITOT STATIC TEST SET | 1 | |
| 101-00185-463 | TESTER: PITOT,60-420KTS,6KFT/M, W/2 25FT HOSES & A | 3 | |
| 101-00185-465 | Barfield 101-00185-465 Pitot Static Test Set, For Aircraft | 7 | |
| 101-00185-625 | PITOT STATIC TEST SET | 1 | |
| 101-00185-635 | Pitot Static Test Set | 1 | |
| 101-00185-645 | Barfield Pitot-Static Tester, 20 to 250 kts, 4k ft/min, 35 kft | 3 | |
| 101-00185-665 | Barfield 101-00185-665 Pitot-Static Tester, For Aircraft | 6 | |
| 101-00185A0A | TESTER: PITOT,20-650KTS,6KFT/M, | 2 | |
| 101-00188 | PITOT STATIC TESTER 1811HAR465 | 1 | |
| 10R10018-19S | THIS IS NOT A TOOL | Not Available | Not Available |
| 1100-1890-G/D-165 | GUN BARREL DRILL #12 | 1 | |
| 110018-11 | #2 ENG BOOTSTRAP KIT | 1 | |
| 1410018 | 1/4DR x 9/32" HEX SOCKET | 1 | |
| 186A1001-8 | THIS IS NOT A TOOL | Not Available | Not Available |
| 2010018 | 3/8DR x 18mm SOCKET BI-HEX | 1 | |
| 210018 | EAR | 1 | |
| 2110018 | 3/8DR x 18mm HEX SOCKET | 1 | |
| 21C3110-018 | ROTOR BLADE GAGE | 1 | |
| 23010018 | 50.IMP.18-1/2DR x 18mm HEX IMPACT SOCKET | 1 | |
| 25010018 | 55.IMP.18-3/4DR x 18mm HEX IMPACT SOCKET | 1 | |
| 3010018 | 1/2DR x 18mm SOCKET BI-HEX | 1 | |
| 310018 | MDP3202-A/D Pistol Grip Electric Driver (1/4 F/Hex) | 1 | |
| 351-2100-18GSE | FAN COWL HOLD OPEN ROD GSE | 1 | |
| 4360004-81-0018 | HEATER-WATER | 1 | |
| 45A10001-001/810-2 | TRAVEL GAGE, FLAP L.H. | 2 | |
| 4769-5010-0180 | TOOL | 1 | |
| 4AS9910018-501 | PITOT TUBE COVER | 1 | |
| 6100-1/8-5 | PROBE 1/4 INCH | 1 | |
| 6100-1/8-S-BNC | SONDA GENERAL DE SUPERFICIE 1/8" | 1 | |
| 62100-1800 | DDR3 DIMM Latch Tower Spreading Tool | 1 | |
| 7-262110018 | COMPRESSOR TOOL PEDA | 1 | |
| 7-562100182-001 | CROWFOOT, MODIFIED, HORIZONTAL | 1 | |
| 7-562100183-601 | SHOULDER PIN R/I SWASHPLATE | 1 | |
| 7-562100184-001 | EXTENSION TOOL, AXEL | 1 | |
| 7-562100185-601 | LOWER SHOE BUSHING R&I TOOL | 1 | |
| 70210018 | 10845 - DOLLY | 1 | |
| 79000D92001010018 | EXTENSION CABLE | 1 | |
| 81281001-802 | VIDEOSCOPE | 1 | |
| 83400101-001-89 | ADAPTER (FOR ATC/XPDR BOTTOM ANTENNA) | 1 | |
| 860D100-18 | UNIT, FLAP CONTROL | 1 | |
| 9711100184 | SCREW | 1 | |
| 9752100180 | THIS IS NOT A TOOL | Not Available | Not Available |
| 98A29001001800 | SET OF TOOL PIPES | 1 | |
| 98S57003001100-18-REVB0 | SUPPORT PLATE | 1 | |
| A21001-8 | SUPPORT | 1 | |
| A71001-83 | LUG | 1 | |
| A71001-84 | LUG (OPP -83) | 1 | |
| A71001-85 | BASE | 1 | |
| ACSM100-.187 | EDDY CURRENT PROBE | 1 | |
| ACSMF100-.187/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.187 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHZ-2MHZ 4-PIN FISCHER CONNECTOR. .187"Ø INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ACSU100-.187SS | STAINLESS STEEL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .187"(4.74MM) Ø Includes Test Report and Certificate of Conformance | 1 | |
| AGE10018 | SET TOOL | 1 | |
| AM-1001-80 | TOOL | 1 | |
| ARRCS100-.187 | RECHII 100° COUNTERSINK ROTARY PROBE 100KHz-2MHz, 0.187" OD, 3.0" OVERALL LENGTH, 4 PIN STEP LEMO. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRCS100-.187SS/1.5WL | PROBE COUNTERSINK | 1 | |
| AT100-18 | CYLINDER | 1 | |
| AT1100-18 | PLUG | 1 | |
| ATCSM100-.187 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ATI1001-8 | BUCKING BAR HEAD ONLY-ERGO | 1 | |
| ATI25010018 | PILOT EXT COUNTERSINK | 1 | |
| AURCS100-.187 | PROBE - 5, | 1 | |
| AURCS100-.187/2.5WL | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .187"OD TIP, 2.5" WORKING LENGTH 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.187/4WL | UNIVERSAL ROTARY 100 DEGREE COUNTERSINK HOLE PROBE WITH PLASTIC HOUSING. 0.187 INCH (4.76MM) DIAMETER PILOT | 1 | |
| AURCS100-.187/70MMWL | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .187"OD TIP, 70mm WORKING LENGTH 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.187SS | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .187"OD TIP, 100KHZ-2MHZ, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AURCS100-.187SS/1.5WL | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .187"OD TIP, 1.5" WORKING LENGTH, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCSF100-.187 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, FERRITE SHIELDED .187"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B100-1/8 | 1/8" HSS SPIRAL FLUTE H/REAMER | 1 | |
| B21001-8 | BLOCK | 1 | |
| BAH310018SC5 | RECIPS BIM 4 | 1 | |
| BAH310018ST1 | RECIPS BIM 4 | 1 | |
| BAH310018ST5 | RECIPS BIM 4 | 1 | |
| BARFIEL 101-00185 | Field Tester | 1 | |
| BRMBC10018 | BC 1IN 25.4MM 180SC FLEX HONE | 1 | |
| C21001-8 | TOTE PACK | 1 | |
| CS-AGE-31100-18 | Pistola de presión | 1 | |
| D23581100-18 | THIS IS NOT A TOOL | Not Available | Not Available |
| DMC1001-8 | .022" Pre-Set Tension Safe-T-Cable® Application Tool Kit with Test Block (No Cable Included) | 2 | |
| EEBC100-18 | RECTIFIER ASSY. | 1 | |
| FIL8100-18-135 | Collar | 1 | |
| FIL8100-18-137 | Slew Drive Shaft | 1 | |
| G1001010018-001 | COVER, ECS EXHAUST | 2 | |
| G51001-8 | SLIDE ASSY | 1 | |
| G601-710018-1 | ALIGNMENT TOOL | 1 | |
| G601-710018-13 | PIN - ENGINE INSTALLATION LOCATION | 1 | |
| G71001-80 | LOWER INBD ARM | 1 | |
| G71001-82 | BRACE HORIZ LUG | 1 | |
| G71001-82-CM | 3125 THK A36 | 1 | |
| G71001-83 | BOOTSTRP | 1 | |
| G71001-84 | CLEVIS | 1 | |
| G71001-85 | PLATE | 1 | |
| G71001-85-CM | 50 THK A36 | 1 | |
| G71001-86 | TUBE | 1 | |
| G71001-87 | INBD COMP | 1 | |
| G71001-89-CM | 5 THK A36 | 1 | |
| IAE1F10018 | ref only - check S2 can MFR | 1 | |
| J21001-8 | Pin | 1 | |
| J21001-80 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 6 | |
| J21001-80-M | MFD PARTS FOR -80 | 1 | |
| J21001-81 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-81-M | FISHPOLE ADAPTER EQPT, MFD PARTS FOR -81 | 1 | |
| J21001-82 | HEAT EXCHANGER ADAPTER | 5 | |
| J21001-82-M | MFD PARTS FOR -82 | 1 | |
| J21001-83 | ADAPTER CONDENSER/ REHEATER | 2 | |
| J21001-84 | ADAPTOR | 2 | |
| J21001-84-M | MFD PARTS FOR -84 | 1 | |
| J21001-85 | Handle | 4 | |
| J21001-87 | Storage box assy | 1 | |
| J21001-88 | Arm assy "A" | 1 | |
| J21001-89 | Arm assy "B" | 4 | |
| J71001-8 | LH outer beam assy | 1 | |
| J71001-81 | HOIST | 3 | |
| J71001-83 | Lok-a-loy | 1 | |
| J71001-84 | Master link | 1 | |
| J71001-85 | Shackle | 1 | |
| J71001-86 | Spring Pin | 1 | |
| K71001-8 | AFT main arm assy | 1 | |
| K71001-80 | TOOL | 2 | |
| K71001-81 | AFT INBD CLAMP | 1 | |
| K71001-83 | CABLE ASSY | 1 | |
| K71001-84 | CABLE ASSY | 1 | |
| K71001-86 | Aft pylon pin | 1 | |
| K71001-87 | Aft inbd arm pin | 1 | |
| KL100-18 | LT BRN 110NM ACCUTQ | 1 | |
| ME141A6100-1-8 | CROSS BAR WELDMENT | 1 | |
| PWA100180 | PRESSURE RIGGING KIT_457 X 356 X 178 MM / 8 KG_[PWA100180] | 1 | |
| PWA100180G | SERVICE TOOL | 1 | |
| RNF-100-1/8-9 | TOOL | 1 | |
| RNF-100-1/8-BK-SP | HEAT SHRINK SLEEVING (METRE) | 1 | |
| SC10018 | CASEIH 9/16 STD 6PT SKT 1/4DR | 1 | |
| SN10018 | NH 9/16 STD 6PT SKT 1/4 DR | 1 | |
| SP510018 | REVERSE VALVE | 1 | |
| T100187 | SCHLEPPSTANGE? | 1 | |
| TE27T-41001-8 | TEST EQUIPMENT SCALE | 1 | |
| TQFR100-18 | FRAME | 1 | |
| TSF21T-51001-8 | TEST SUPPORT FIXTURE, AIR CONDITIONING PACKS, BLEED OFF KIT | 1 | |
| U8010018 | RESONANCE PROBE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
