| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-014 | #14 SHORT SERIES THREADED DRILL BIT | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 351-2100-14GSE | FAN COWL HANDLING SLING (CALIBRATION) (CALIBRATION) | 1 | ||
| 01010014 | 40.14 - 1/4"DR x 14mm SOCKETS, HEXAGON | 1 | ||
| 01410014 | 40.A.7/32-1/4DR x 7/32" HEX SOCKET | 1 | ||
| 01A1231-0014 | Towbar, G-222,C27j (Ce) | 1 | ||
| 02010014 | 45.14 - 3/8DR x 14mm SOCKET BI-HEX | 1 | ||
| 0210014F | WASHER 1/4 LIGHT T3 G/20 ZINC CLEAR | 1 | ||
| 02110014 | 456.14-3/8DR x 14mm HEX SOCKET | 1 | ||
| 03010014 | 50.14 - 1/2DR x 14mm SOCKET BI-HEX | 1 | ||
| 03110014 | 50.DSQ.14-*OBS*1/2" SOCKETS, DBLE SQUARE | 1 | ||
| 0333100140 | PLATE, STOP | 1 | ||
| 05-3005-1100-14 | OPTION: DU, | 1 | ||
| 05-3010-1100-14 | OPTION: DUAL SYSTEM, | 1 | ||
| 05-7008-1100-14 | OPTION: DU, | 1 | ||
| 05-7015-1100-14 | CROSS CHEC, | 1 | ||
| 05-7023-1100-14 | OPTION, | 1 | ||
| 0710014-8 | ESCUTCHEON | 1 | ||
| 09-6201-0014 | Deicer, 275gal,415vac, 3ph(Ce) | 1 | ||
| 09C-1001-4 | TOOL | 1 | ||
| 10-014428-00EWSX0397 | Y WIRE | 1 | ||
| 10-01475B | TR CC SLVR BRIT 26.542 KESN | 1 | ||
| 10-01478 | TR CS BRUSH TITA KRXL LKR | 1 | ||
| 10-01497A | 20IN DWT TRMLATCH LVR BR RED | 1 | ||
| 10-10014 | Bowers Granite Table 1200x900x150mm Grade 1 | 1 | ||
| 100140-201 | Connector Electrical | 1 | ||
| 100140-202 | Connector Electrical | 1 | ||
| 100140-203 | Connector Electrical | 1 | ||
| 1001412 | KIT,AUXILIARY AIR SUPPLY | 1 | ||
| 10014214 | SPRING, PLUNGER (INTERNAL HEX) | 1 | ||
| 1001449 | NITROGEN REGULATER | 1 | ||
| 100147-1 | GUIDE FIXTURE | 1 | ||
| 109-3010-01-47 | TOOL FLIGHT CONTROL | 1 | ||
| 11010014 | 405/14-1/4 EXTENSION 14 LONG | 1 | ||
| 1410014 | 1/4DR x 7/32" HEX SOCKET | 1 | ||
| 186A1001-4 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 19010014 | 4153-SPARE PARTS SET FOR RATCHET | 1 | ||
| 1F10014 | Pusher, GBX Link Aft | 1 | ||
| 1Z10014 | LONGDITUDINAL CHECK GAUGE | 1 | View Images / Tech Appraisal | |
| 2010014 | 3/8DR x 14mm SOCKET BI-HEX | 1 | ||
| 206-011-100-145 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 210-014 | WINDSHIELD COVER | 1 | ||
| 2110014 | 3/8DR x 14mm HEX SOCKET | 1 | ||
| 21C3110-014 | ROTOR BLADE GAGE | 1 | ||
| 2292100140 | THREADED AXLE | 1 | ||
| 23010014 | 50.IMP.14-1/2DR x 14mm HEX IMPACT SOCKET | 1 | ||
| 3010014 | 1/2DR X 14MM SOCKET BI-HEX | 1 | ||
| 310014 | MD3216-A ELECTRIC DRIVER (1/4 F/HEX) | 1 | ||
| 3100143 | RAMPRO CROW FOOT WRENCH | 1 | ||
| 351-2100-14GSE | FAN COWL HANDLING SLING | 2 | ||
| 43210014 | 14MM HEX KEY WRENCH EX LONG NP | 1 | ||
| 5100140 | COVER EXHAUST ENGINE | 1 | ||
| 5100141 | COVER ENGINE INLET | 1 | ||
| 5210-01-418-0671 | DIGITAL INCLINOMETER | 1 | ||
| 53-10-014 | EMBRAER 170 / 195 CTS PART 6 (53-10-00) NDT BLOCK | 1 | ||
| 53-10-014-005ALT | NDT TEST PIECE | 1 | ||
| 53100141-1 | PLUG,SHUNT | 17 | ||
| 53100141-1A | THIS IS NOT A TOOL | Not Available | Not Available | |
| 53100141-4 | PLUG SHUNT | 1 | ||
| 535110014 | ALU LADDER 3 STEPS | 1 | ||
| 59010014 | 70.V.11-SQUARE DRIVE UNIT 3/8"-1/4" | 1 | ||
| 60-0100-1416-9 | CIRCULAR SANDPAPER | 1 | ||
| 6071001-4 | TCAS ANTENNA ATTENUATOR CAP | 1 | ||
| 6100-1-4BNC | PROBE EDDY CURRENT | 1 | ||
| 62100-1400 | BACKPLANE INSERTION SIGNAL CONTACT TOOL | 1 | ||
| 7-562100144-603 | PITOT STATIC ACCESSORY KIT | 1 | ||
| 70210014 | DOLLY | 1 | ||
| 710014101 | A/C TYRE PRESSURE EQPT | 1 | ||
| 7100141012 | A/C TYRE PRESSURE EQPT. | 1 | ||
| 7100142458 | 3M™ AIR POWER DIE GRINDER, 1 HP, 8.000 RPM, 6 MM COLLET | 2 | ||
| 7100148766 | MIXING NOZZLE 48.5ML/50ML | 1 | ||
| 7292100141 | THREADED PIN REPAIR DIMENSION | 1 | ||
| 79000D92001010014 | HYDRAULIK KABEL | 1 | ||
| 810014 | TORQUE WRENCH | 1 | ||
| 810014-1 | TOOL | 1 | ||
| 811-00148SV | TEST SET,TTU415E, 600 SERIES | 1 | ||
| 81301001-415 | VIDEOSCOPE / BORESCOPE WITH 3.9 MM PROBE, AND 1.5 METRE SCOPE LENGTH. | 1 | ||
| 826483310014 | EASY CUT 1IN | 1 | ||
| 85010014 | MOBILE WORKBENCH, No 92KM G | 1 | ||
| 8810014087 | PIN | 1 | ||
| 95-000104-100-14 | TOOL | 1 | ||
| 9752100140 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9880410014 | NUT | 1 | ||
| 98A32201001400 | TOOL | 2 | ||
| 98A32201001402 | TOOL | 1 | ||
| 98A32201001403 | TOOL | 1 | ||
| 98A32201001417 | TOOL | 1 | ||
| 996G7100-140 | OLED SWITCH PANEL | 1 | ||
| 9988100-14 | *CABLE ASSY | 1 | ||
| A1001427 | THIS IS NOT A TOOL | Not Available | Not Available | |
| A109BF-2100-14 | CLEVIS | 1 | ||
| A109BF-2100-14-RW | CLEVIS, REWORK | 1 | ||
| A1231-0014 | TOWBAR, CUSTOM C27J (CE) | 1 | ||
| A21001-4 | BASE ASSY | 1 | ||
| A21001-40 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | ||
| A21001-41 | SUPPORT ASSY | 1 | ||
| A21001-42 | SUPPORT ASSY | 1 | ||
| A21001-43 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | ||
| A21001-43-CM | 012THK A36 | 1 | ||
| A21001-44 | HOIST ADAPTERS - AIR CONDITIONING PACK | 13 | View Images / Tech Appraisal | |
| A21001-44-M | HOIST ADAPTER | 1 | ||
| A21001-45 | HOIST ADAPTERS - AIR CONDITIONING PACK | 10 | View Images / Tech Appraisal | |
| A21001-46 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | ||
| A21001-47 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | ||
| A21001-47/36 | ADAPTOR & CRADLE | 1 | ||
| A21001-48 | ADAPTER ASSY | 1 | ||
| A71001-42 | LINK | 1 | ||
| A71001-43 | CLEVIS FITTING | 1 | ||
| A71001-46 | PIN | 1 | ||
| A71001-47 | PIN | 1 | ||
| A71001-48 | LINK | 1 | ||
| A71001-48-CM | 375 THK 4140 MTL & WJC | 1 | ||
| AIT710014 | Pedestal Set-Engine RR Trent 500 & 700 | 1 | ||
| AL231-0014 | TOWBAR, AIRCRAFT | 1 | ||
| AT100-14MP2 | PIN 2 PK | 1 | ||
| AT1100-14MP8 | LOCK WASHER 8 PK | 1 | ||
| AURCS100-.142 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .142"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| AURCS100-14.0M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .551"(14.0mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| AURCS100-14.3M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .563"(14.3mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| AURCS100-14.6M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .575"(14.6mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| B-10014 | 616-024 INTELLIPORT DOOR SCREE | 1 | ||
| B100-145 | PROP TIE-DOWNS (set of 2) | 1 | ||
| B100-149 | FLAG: "WARNING: NOSEGEAR LOCKED, DO NOT MOVE" (removable sign) | 1 | ||
| B1301001-403 | STORZ ENDOSCOPE | 1 | ||
| B21001-4 | CLAMP HALF | 1 | ||
| B21001-4-INC | CLAMP HALF | 1 | ||
| B71001-40 | BRACE ASSY | 1 | ||
| B71001-43 | CLEVIS | 1 | ||
| B71001-44 | CLEVIS | 1 | ||
| B71001-45 | CLEVIS | 1 | ||
| BAH310014SC5 | RECIPS BIM 4 | 1 | ||
| BAH310014ST1 | RECIPS BIM 4 | 1 | ||
| BAH310014ST5 | RECIPS BIM 4 | 1 | ||
| BK3100-14 | FOAM - BATTERY PADS | 1 | ||
| BS1902100140000 | KIT | 1 | ||
| C10014-1 | WEIGHT EQUIPMENT - ENGINE DUMMY BALLAST | 1 | ||
| C10014-4 | Fwd mount assy max | 1 | ||
| C10014-76 | BALLAST-ENGINE WEIGHT | 1 | ||
| C21001-4 | TUBING | 1 | ||
| CG100-14 | PUNCH | 1 | ||
| CSM-100-14 | EDDY CURRENT PROBE | 1 | ||
| CSM-100-14(0.218INCHDIAMETER) | EDDY CURRENT PROBE | 1 | ||
| CSM100-14 7/32 | PROBE | 1 | ||
| CSMF-100-14/200K-1M | 0.218 INCH DIAMETER | 1 | ||
| CSU100-14 | ROTARY HOLE PROBE 7/32" | 1 | ||
| DAPT61-0014-00 | ADAPTER-TORQUE | 1 | ||
| DPOT000D100148 | STRESSLESS PLATEFORM | 1 | ||
| EEBC100-14 | TIMER | 1 | ||
| FB70-025-F100-14A | F100 HEADED BUSH AXIAL PIN | 1 | ||
| FB70-025-F100-14T | F100 HEADED BUSH TORSIONAL PIN | 1 | ||
| FIL8100-14-43A | Inner axle protection shell | 1 | ||
| FIL8100-14-43C | Inner Axle Protection Shell (CLG) | 1 | ||
| FIL8100-14-45A | Outer protection shell | 1 | ||
| FIL8100-14-617 | Kato Expander Spring | 1 | ||
| FIL8100-14-618 | Kato Expander Spring | 1 | ||
| G21001-4 | COUPLER | 1 | ||
| G601-710014-51 | KIT, FCU PROTRACTOR | 2 | ||
| G601R491001-45 | TOOL | 1 | ||
| G601R491001-49 | WIRE, ROPE | 1 | ||
| G71001-4 | Fwd inbd arm assy | 1 | ||
| G71001-40 | OUTBD HORIZ BRACE | 1 | ||
| G71001-41 | Cable Assy | 1 | ||
| G71001-43 | Pin-AFT support | 1 | ||
| G71001-44 | UPPER INBD ARM | 1 | ||
| G71001-46 | LOWER INBD ARM | 1 | ||
| G71001-48 | INBD HORIZ BRACE | 1 | ||
| G71001-49 | OUTBD HORIZ BRACE | 1 | ||
| GSB1210014 | UNIT-FUEL SAMPLER | 3 | ||
| GT9910014-GT0001-0001 | SPRING COMPRESSION TOOL ASSY | 1 | ||
| GT9910014-GT0001-0010 | TOOL, SPRING COMPRESSION | 1 | ||
| GT9910014-GT0001-0050 | CARGO DOOR SRPING COMPRESSION TOOL ASSEMBLY | 1 | ||
| GT9910014-GT0001-0055 | COMPRESSION TOOL, A220 CARGO DOOR SPRING | 1 | ||
| HV21910014 | WIRESPOOL4,5KG FLUX-CORED D0,9 | 1 | ||
| HV22910014 | ADAP CO2-ARGON GAS BOTTLE ITAL | 1 | ||
| IAE1F10014 | PUSHER/PULLER R/I | 1 | ||
| IM3100-14 | PIN | 1 | ||
| IM5100-14 | PIN, FRAME ASSEMBLY | 1 | ||
| J21001-47 | ROD | 1 | ||
| J71001-40 | PIN | 1 | ||
| J71001-41 | PIN | 1 | ||
| J71001-44 | 1 | |||
| J71001-45 | SLING-INLET COWL | 1 | ||
| J71001-46 | EXTRA LONG CABLE ASSY | 1 | ||
| J71001-46-CA | -46 CABLE LESS | 1 | ||
| J71001-47 | SHORT CABLE ASSY | 3 | ||
| J71001-47-CA | -47 CABLE LESS | 1 | ||
| J71001-48 | LONG CABLE ASSY | 3 | ||
| J71001-48-CA | -48 CABLE LESS | 1 | ||
| K10014-1 | PLUG - CABIN AIR COM | 4 | ||
| K10014-2 | PLUG - CABIN AIR COM | 3 | ||
| K10014-3 | PLUG - CABIN AIR COM | 2 | ||
| K71001-46 | Pad pin | 1 | ||
| KL100-14 | YELLOW 90NM ACCUTORQ | 1 | ||
| M01-00140C | 1-3/8" SPLINE SOCKET, MFR#: J5744SPL | 1 | ||
| M01-00141M | 1-1/2" SPLINE SOCKET, MFR#: J5748SPL | 1 | ||
| M53100141-1 | TOOL | 1 | ||
| M81001427A | MEASURING TOOL | 1 | ||
| M81001428A | MEASURING TOOL | 1 | ||
| M81001428B | MEASURING TOOL | 1 | ||
| MIT-1544100-14 | HOLDING TOOL (PART OF MIT-1544100) | 1 | ||
| MOI1010014 | 1/4-28 BUTTERFIELD TAPER | 1 | ||
| MTOO03-JEVA18100144K | Extractor | 1 | ||
| P4-01-0014-210 | POWER UNIT | 1 | ||
| PROO01-1001428-3 | Tapa Air Inlet | 1 | ||
| PSB100-14 | STL INSERT | 1 | ||
| PT100-14 | SPACER | 1 | ||
| PWA10014 | WRENCH | 6 | ||
| REM100-14 | HAND TOOL HI-SHEAR PIN DIA. -14 NOM PIN 7/16" | 1 | ||
| RNF-100-1/4-0 | THIS IS NOT A TOOL | Not Available | Not Available | |
| RNF-100-1/4-0-SP | THIS IS NOT A TOOL | Not Available | Not Available | |
| RNF-100-1/4-0-STK | HEAT SHRINK SLEEVING (METRE) | 1 | ||
| S1201001400100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S2751001400200 | TOOL | 1 | ||
| SC100-14111-1855-1725 | .1855 X .1725 HSS PLT REAMER | 1 | ||
| SC100-14112-1990-1870 | .1990 X .1870 HSS PLT REAMER | 1 | ||
| SC100-14113-2145-2085 | .2145 X .2085 HSS PLT REAMER | 1 | ||
| SC100-14114-2455-2340 | .2455 X .2340 HSS PLT REAMER | 1 | ||
| SC100-14114-2625-2455 | .2625 X .2455 HSS PLT REAMER | 1 | ||
| SC10014 | CASEIH 1/2 STD 6PT SKT 1/4DR | 1 | ||
| SM100¡1/4-28X3/4-SSFHPH | MAC.SCREW100¡ 1/4-28X3/4 ST. ST F.HEAD PHILLIPS | 1 | ||
| SN10014 | NH 7/16 STD 6PT SKT 1/4 DR | 1 | ||
| SP510014 | HANDLE GRIP | 1 | ||
| STW01210014 | MJ14-DN06 USE STW440MJ14 | 1 | ||
| T-100-1/4 | BENDER ST TUBE HND ACUATE 1/4" | 1 | ||
| T01001418 | MD11 FWD CGO DOOR GO/NO GO GAGE | 1 | ||
| TB100-14MMAFOE | WRENCH TORQUE PRESET 13.5RBF IN | 1 | ||
| TB100-14MMFOE | WRENCH TORQUE PRESET 13.5LBFIN MIGRATION-MAS-PSEU | 1 | ||
| TLG5120-100-1-4 | TAPER-LOK DEPTH GAGE | 1 | ||
| TR10014A | 1-14IN NC RTHR DIE | 1 | ||
| TSF29T-01001-4 | TEST SUPPORT FIXTURE, HYDRAULIC TUBING LEAKAGE TEST | 1 | ||
| TSF31T-31001-4 | ACCELEROMETER 3 AXIS SIMULATOR | 1 | ||
| TSJ-1544100-14 | RIG PIN | 1 | ||
| WCI-1700NE-1001-40F | NOSE EXTENSION | 1 | ||
| WCI-1700NE-1001-45F | EXTENSION NOE CAP | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
