| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-013 | THREADED SHANK ADAPTER DRILL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) B71001-337 | DYNAMOMETER (CALIBRATION) | 1 | |
| (CALIB) B71001-372 | ENGINE HANDLING EQUIPMENT - RB211-535 (CALIBRATION) | 2 | |
| (CALIB) G51001-30 | Measurement Eqpt - Check, Skin Smoothness (CALIBRATION) (CALIBRATION) | 1 | |
| 01-0013 | CHARGER-BATTERY | 1 | |
| 01010013 | 40.13 - 1/4"DR x 13mm SOCKETS, HEXAGON | 1 | |
| 02-2830-100-1395 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02010013 | 45.13-3/8DR x 13mm SOCKET BI-HEX | 1 | |
| 02110013 | 456.13-3/8DR x 13mm HEX SOCKET | 1 | |
| 03010013 | 50.13-1/2DR x 13mm SOCKET BI-HEX | 1 | |
| 0410 0134 000 | THREE PRONGED SLEEVE EXPANDER | 1 | |
| 08-02-1-01-0013 | FIXED CONTACT | 1 | |
| 09-6201-0013 | Deicer, 275gal,208vac, 3ph(Ce) | 1 | |
| 09C1001-3 | TOOLING PART | 1 | |
| 1-100-131-01 | THIS IS NOT A TOOL | Not Available | Not Available |
| 10-01375B | TR CS SLVR BRIT 26.542 KESN | 1 | |
| 10-01397A | 12IN DWT TRM LATCH LVR BR RED | 1 | |
| 10-100-1300 | TACHOMETER OPTIAL LASERTACH II 299 NEW | 3 | |
| 10-10013 | Bowers Granite Table 1200x900x150mm Grade 0 | 1 | |
| 100-1311-01 | THIS IS NOT A TOOL | Not Available | Not Available |
| 100130 | Zero Flute CounterSink Cutters (Capacity: 3/32" - 1/4") (Overall length: 1-1/2" (38.1 mm)) (Add to cart: Add To Cart) | 1 | |
| 100131 | Zero Flute CounterSink Cutters (Capacity: 3/32" - 1/4") (Overall length: 1-1/2" (38.1 mm)) (Add to cart: Add To Cart) (Capacity: 1/8" - 27/64") (Overall length: 1-11/16" (42.8 mm)) (Add to cart: Add To Cart) | 1 | |
| 100132 | Zero Flute CounterSink Cutters (Capacity: 3/32" - 1/4") (Overall length: 1-1/2" (38.1 mm)) (Add to cart: Add To Cart) (Capacity: 1/8" - 27/64") (Overall length: 1-11/16" (42.8 mm)) (Add to cart: Add To Cart) (Capacity: 3/16" - 35/64") (Overall length: 1-7 | 3 | |
| 1001341-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| 10013487-S91-1 | SAFETY PLUG WRENCH | 1 | |
| 1001354 | CROW FOOT KIT 1/4" - 1 1/4" | 1 | |
| 10013548-S91-2 | ALIGNMENT TOOL | 1 | |
| 10013677-S57-2 | ASSEMBLY FIXTURE | 1 | |
| 10013677-S58-1 | TEST PLUG | 1 | |
| 10013677-S58-2 | TOOL | 1 | |
| 10013677-S58-3 | TEST PLUG | 1 | |
| 10013677-S58-4 | TEST PLUG | 1 | |
| 10013677-S58-5 | TEST TOOL | 1 | |
| 10013842 | THIS IS NOT A TOOL | Not Available | Not Available |
| 10013922-S58-1 | TEST CONNECTOR | 1 | |
| 110-013 | NIPPLE, QUICK DISCONNECT | 1 | |
| 1159GSEP40100-13 | AXLE PROTECTOR-NOSE LANDING GR - GIV, G300, G350, G400, G450 | 2 | |
| 1159SEAV20100-1-3 | FUEL QUANTITY TEST CABLE | 1 | |
| 12L1001-36 | Dotco® Die Grinders (Exhaust type: Front) (Capacity: 1/2" Carb Burr 1" Mount Wheel) (Rpm (no load): 30000) (Collet: 1/4" Collet) (Overall length-weight: 6" (152mm) - 0.8 lbs (0.4 kgs)) (Add to cart: Add To Cart) (Exhaust type: Front) (Capacity: 1/2" Carb | 1 | |
| 12L1001-36RT | Dotco® Straight Routers (Rpm (no load): 34000) (Shank diameter capacity: 1/4") (Overall length: 6-3/4" (172 mm)) (Type: Front Exhaust 0.3 hp (.22 kW)) (Add to cart: Contact us to order) (Rpm (no load): 30000) (Shank diameter capacity: 1/4") (Overall lengt | 1 | |
| 189A1001-3 | THIS IS NOT A TOOL | Not Available | Not Available |
| 19010013 | 4152-SPARE PARTS SET FOR RATCHET | 1 | |
| 2010013 | 3/8DR x 13mm SOCKET BI-HEX | 1 | |
| 210-013 | EXTENDED CANOPY COVER, over-top type, 1962-66: w/struts, w/rear window), extends to cover baggage door | 1 | |
| 2110013 | 3/8DR x 13mm HEX SOCKET | 1 | |
| 23010013 | 50.IMP.13-1/2DR x 13mm HEX IMPACT SOCKET | 1 | |
| 3010013 | 1/2DR X 13MM SOCKET BI-HEX | 1 | |
| 310013 | MD3211-A Electric Driver (1/4 F/Hex) | 1 | |
| 351-6100-13GSE | TRANSLEEVE HANDLING SLING | 1 | |
| 41110013 | 1023-SPECIAL RING SPANNER, 13MM | 1 | |
| 6-11001-36 | DRAIN BYPASS TUBE | 4 | |
| 6-11001-37 | RETAINER KEY | 1 | |
| 62100-1300 | Daughter Card Module Removal Tool | 1 | |
| 63001001-3 | SHIMMING RING | 1 | |
| 70110013 | 10961 800 G-ENGINEERS HAMMER 800G | 1 | |
| 71110013 | 11030N-1-UNIVERSAL WHEEL HUB PULLER | 1 | |
| 7872611001-3 | MAGINFIER | 1 | |
| 79000D92001010013 | HYDRAULIK KABEL | 1 | |
| 810013 | TORQUE WRENCH - LTC750I | 1 | |
| 910013-1 | CABLE ASSEMBLY | 1 | |
| 98A09001001300 | TOOL | 1 | |
| 98A32201001300 | CHARIOT DE MANUTENTION ATTERISSEUR | 1 | |
| 98A32201001301 | CHARIOT DE MANUTENTION ATTERISSEUR | 1 | |
| 98A5710013000 | TAP TEST TOOL | 1 | |
| 99D51407291001-3 | AIRBUS CARBON STANDARD SET, ALL PT4 51-10-06:FIG402 PG404, FABRIC MATERIAL #3 | 1 | |
| 9PRE65B00161-110-013 | PROTECTOR DE ROSCAS EJE SUPERIOR DE MUÑÓN | 1 | |
| A109BF-2100-13 | CLEVIS | 1 | |
| A21001-3 | ADAPTER ASSY | 1 | |
| A21001-30 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-31 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-32 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-33 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-34 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-35 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-36 | ADAPTER HOIST PACK A | 1 | |
| A21001-37 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-38 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-39 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A25451001-3 | UPLOCK,(W/KIT) LH MAIN LANDING | 1 | |
| A71001-331 | BOOTSTRAP EQPT | 1 | |
| ACEU-D-10013 | CUSTOM REPORTING | 1 | |
| ACSU100-13.0M | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. 13.0M(0.512")Ø Includes Test Report and Certificate of Conformance. | 1 | |
| AECS100-13.6MSS/35MWL | ELOTEST PROBE, STAINLESS STEEL, 50KHZ-2.5MHZ, 100° COUNTER SINK, | 1 | |
| AGNRN4710013 | DUAL EDGE SCREW EXTRACTOR NO.1 | 1 | |
| AIT710013 | chest torque set A330 Trent | 1 | |
| APN 10013677-S57-2 | ASSEMBLY FIXTURE | 1 | |
| APN 10013677-S58-1 | TEST PLUG | 1 | |
| APN 10013677-S58-2 | TEST PLUG | 1 | |
| APN 10013677-S58-3 | TEST PLUG | 1 | |
| APN 10013677-S58-4 | TEST PLUG | 1 | |
| APN 10013922-S58-1 | TESTING CONNECTOR | 1 | |
| AT100-13H | SCREEN | 1 | |
| AT1100-13MP4 | LOCK WASHER 4 PK | 1 | |
| AURCS100-13.5M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .531"(13.5mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B21001-3 | CLAMP | 1 | |
| B26942100-131 | BUTT PLATE ASSY | 1 | |
| B692-07010013 | AVR | 1 | |
| B6T-51-001-34 & -36 | Floor Fitting Alignment Tool | 1 | |
| B6T-51-001-35 | Floor Fitting Alignment Tool | 1 | |
| B71001-311 | Boeing | 1 | |
| B71001-312 | Boeing | 1 | |
| B71001-313 | ENGINE HANDLING EQUIPMENT - RB211-535 | 4 | |
| B71001-314 | Inbd fwd rail arm assy | 1 | |
| B71001-315 | Outbd fwd rail arm assy | 1 | |
| B71001-316 | ARM ASSY | 1 | |
| B71001-318 | ARM ASSY | 1 | |
| B71001-320 | INBD FWD RAIL ARM ASSY | 1 | |
| B71001-321 | OUTBD FWD RAIL ARM ASSY | 1 | |
| B71001-322 | ARM ASSY | 1 | |
| B71001-324 | ARM ASSY | 1 | |
| B71001-327 | INBD AFT SUPPORT ASSY | 1 | |
| B71001-328 | OUTBD AFT SUPPORT ASSY | 1 | |
| B71001-337 | DYNAMOMETER ASSY | 3 | |
| B71001-34 | BRACKET | 1 | |
| B71001-340 | KIT BOOTSTRAP ENGINE | 1 | |
| B71001-341 | KIT BOOTSTRAP ENGINE | 4 | |
| B71001-346 | JAW | 1 | |
| B71001-347 | Jaw | 1 | |
| B71001-349 | BRACE ASSY | 1 | |
| B71001-35 | BRACKET ASSY | 1 | |
| B71001-350 | SAFETY BRACE ASSY | 2 | |
| B71001-359 | Tie rod | 1 | |
| B71001-365 | TOOL | 2 | |
| B71001-365-M | BOOTSTRAP EQUIPMENT | 1 | |
| B71001-366 | TOOL | 4 | |
| B71001-366-M | BOOTSTRAP EQUIPMENT | 1 | |
| B71001-366U | BOOTSTRAP EQUIPMENT | 1 | |
| B71001-369 | LEVER HOIST | 1 | |
| B71001-37 | BRACE ASSY | 1 | |
| B71001-370 | LEVER HOIST | 1 | |
| B71001-371 | ENGINE HANDLING EQUIPMENT - RB211-535 | 4 | |
| B71001-372 | ENGINE HANDLING EQUIPMENT - RB211-535 | 12 | |
| B71001-373 | INBD FWD BOOTSTRAP ARM ASSY | 2 | |
| B71001-374 | OUTBD FWD BOOTSTRAP ARM ASSY | 2 | |
| B71001-375 | ARM ASSY | 1 | |
| B71001-376 | ARM ASSY | 1 | |
| B71001-38 | BRACE ASSY | 1 | |
| B71001-39 | BRACE ASSY | 1 | |
| BK3100-13 | BATT VHB TAPE FOAM REAR LABELS | 1 | |
| C-10013 | 614-350 PC INTERFACE | 1 | |
| C10013-1 | PROTECTIVE EQUIPMENT, CFM LEAP-1B ENGINE | 1 | |
| C10013-2 | PROTECTIVE EQUIPMENT, CFM LEAP-1B ENGINE | 1 | |
| C10013-3 | PROTECTIVE EQUIPMENT, CFM LEAP-1B ENGINE | 1 | |
| C21001-3 | STRAP ASSY | 1 | |
| C71001-3 | WRENCH | 1 | |
| DPTOTOOOD100135 | NITROGEN AIR TEST SET | 1 | |
| DT710013 | Towbar | 1 | |
| EEBC100-13 | KNOB FOR ROTARY SWITCH | 1 | |
| FB70077-100-13 | FWD / AFT CROSSMEMBER (-7 CRADLE) | 1 | |
| FGFB910013A1 | TOOL | 1 | |
| G51001-30 | MEASUREMENT EQUIPMENT - CHECK SKIN SMOOTHNESS | 3 | |
| G51001-31 | 1 | ||
| G51001-31-MYLAR | MYLAR INDEX STRIP (-31) | 1 | |
| G51001-32 | 1 | ||
| G51001-32-MYLAR | MYLAR INDEX STRIP (-32) | 1 | |
| G601R491001-3 | CRJ APU HOIST ASSY | 1 | |
| G670282100-13 | FUEL DRAIN ASSEMBLY | 1 | |
| G71001-30-CM | 025THK 4130 | 1 | |
| G71001-30-CMF | 025THK 4130 | 1 | |
| G71001-31-CM | 01875THK 4130 | 1 | |
| G71001-32-CM | 025THK 4130 | 1 | |
| G71001-33-CM | 025THK 4130 | 1 | |
| G71001-34 | HORIZ ATTACH BRKT | 1 | |
| G71001-35 | UPPER INBD ARM | 1 | |
| G71001-39 | INBD HORIZ BRACE | 1 | |
| GSB2910013 | KIT-HYDRAULIC PIPE SWAGE REPAIR | 1 | |
| GSB2910013-04 | SWAGE KIT | 1 | |
| GSB6110013 | KIT-DYNAMIC PROPELLER BALANCING | 1 | |
| HE89100-13 | WHEEL ASSEMBLY | 1 | |
| HFL741100130 | CROSS COLD CHISEL | 1 | |
| IM3100-13 | ENGAGEMENT DOG | 1 | |
| J10013-1 | TOOL | 1 | |
| J10013-13 | TOOL | 2 | |
| J21001-3 | HOIST ADAPTER EQUIPMENT - AIR CONDITIONING PACK (CE) | 2 | |
| J21001-37 | BASE | 1 | |
| J71001-35 | SUPERDEDED BY J71001-44 | 1 | |
| J71001-38 | Strap Assy | 1 | |
| J71001-39 | HOIST PIN | 1 | |
| K10013 | TOOL | 1 | |
| K10013-1 | PLUG EXHAUST T/R ENG | 1 | |
| K10013-15 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST DUCT, RR TRENT 1000 | 6 | |
| K10013-16 | TOOL | 1 | |
| K10013-17 | TOOL | 1 | |
| K10013-3 | Plugay-Lh | 1 | |
| K21001-39-REVNC | **BOEING GSE | 1 | |
| K71001-3 | FWD inbd arm assy | 1 | |
| K71001-31 | Lynch pin | 1 | |
| KL0100-13 | NAVY 75NM ACCUTORQ | 1 | |
| LAS10013 | PARTICLE FILTER FOR LN230 ZA | 1 | |
| LDS10-01-31-1-W-400-R | LIGHTNING DIVERT STRIP | 1 | |
| M01-00135E | 1" SPLINE SOCKET, MFR#: J5732SPL | 1 | |
| M01-00136B | 1-1/16" SPLINE SOCKET, MFR#: J5734SPL | 1 | |
| M01-00137L | 1-1/8" SPLINE SOCKET, MFR#: J5736SPL | 1 | |
| M01-00138H | 1-3/16" SPLINE SOCKET, MFR#: J5738SPL | 1 | |
| M01-00139C | 1-1/4" SPLINE SOCKET, MFR#: J5740SPL | 1 | |
| M10-013 | CANOPY/ENGINE/EMPENNAGE/HORIZ. STAB. COVER (Alon model) | 1 | |
| MIT-1544100-13 | WRENCH TOOL (PART OF MIT-1544100) | 1 | |
| MRRPRUK1-100-1332-14-2-25 | MRRP-RUK-1-100-13/32-1/4-2-25 C/SINK PROBE | 1 | |
| N100-1305 | BRACKET N-100 | 1 | |
| OHME65B90100-13 | RING | 1 | |
| PENFLX9100-13 | 90° Surface Probe, .125" Dia x 1.00" Drop x 13" long, Copper Shaft, 50-500KHz, Microdot | 1 | |
| PS1001-3002 | CHARGER - DP1014-0100 PRINTER | 1 | |
| PT100-13 | MUFFLER | 1 | |
| PW40071-00-1310 | BEFESTIGUNGS FWB TRW | 1 | |
| PWA10013 | PULLER - LOW TURBINE HUB_[PWA10013] | 1 | |
| S1201001300050 | STREAMER | 1 | |
| SC100132-ICON LSE 100 ET | COMPRESSOR AR RESPIRAVEL ICON LSE 100 ET PORTATIL MCH6/ET 230V 60HZ 3KW COLTRI | 1 | |
| SEC7200010013 | TOOL | 1 | |
| SP510013 | HOUSING | 1 | |
| TE38T-31001-3 | TEST EQUIPMENT, DRAIN CART | 1 | |
| TESA-01810013 | Tesa 01810013 - Analogue lever-type dial test indicator TAST Lateral, Range - 0.2mm | 1 | |
| TF50B10013-1 | OBTUR. CO AIR OUTLET | 1 | |
| TLG5120-100-1-3 | TAPER-LOK DEPTH GAGE | 1 | |
| TMH TBC12-100-13 | TOOL | 1 | |
| TSF38T-11001-31 | TEST SUPPORT FIXTURE, WATER DRAIN AND PLUG TOOL | 1 | |
| TSF38T-11001-32 | TEST SUPPORT FIXTURE, GRAY WATER DRAIN PLUG | 1 | |
| TSF38T-11001-35 | TEST SUPPORT FIXTURE - GAUGE SHUT OFF VALVE | 1 | |
| TSJ-1544100-13 | RIG PIN | 1 | |
| WAVRWB100-13 | SQUARE DRIVE ROLLER | 1 | |
| WCI-1700NE-1001-30F | NOSE EXTENSION | 1 | |
| WCI-1700NE-1001-30FS | EXTENSION NOSE CAP-SPECIAL | 1 | |
| WCI-CCM-10-0-1-35 | FTI MANDREL PILOT LONG | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
