| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10006 | SNAP SOC RIVET SET CAP 6/32 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 01-1000-61 | OXYGEN TEST SET | 1 | |
| 01-1221-0006 | TOWBAR: PORTABLE, DROP SHIP ONLY | 3 | |
| 010-00667-40 | GPSMAP 696 | 1 | |
| 01010006 | 40.6 - 1/4"DR x 6mm SOCKETS, HEXAGON | 1 | |
| 03100060 | 54.TX.T.60-1/2DRxT60 INT.TORX DRIVER SKT | 1 | |
| 0319100060 | FILTER ASSY | 1 | |
| 0322100060 | GEAR,64 TEETH | 1 | |
| 05-3005-1100-06 | OPTION: DU, | 1 | |
| 05-3010-1100-06 | DUAL SYS OPTION, | 1 | |
| 05-7008-1100-06 | OPTION: DU, | 1 | |
| 05-7015-1100-06 | DUAL SYSTM, | 1 | |
| 05-7022-1100-06 | OPTION: DU, | 1 | |
| 05-7023-1100-06 | DUAL SYS, | 1 | |
| 05-7024-1100-06 | OPTION: DU, | 1 | |
| 05-7025-1100-06 | OPTION: DU, | 1 | |
| 05-7046-1100-06 | OPTION: DU, | 1 | |
| 05-7052-1100-06 | OPTION: DUAL SYSTEM, | 1 | |
| 05100060 | 59.TX.T.60-3/4DR x T60 INT.TORX DR SOCKET | 1 | |
| 10-00675B | TR CC SLVR BRIT 25.257 KEWN | 1 | |
| 10-00677A | TR CX TGRY BRIT 37.75 KEX | 1 | |
| 10-00678 | TR CS TITANIUM KRXL LKR | 1 | |
| 10-00697A | 62IN DWR TRM LATCH LVR BRT | 1 | |
| 10-10006 | Bowers Granite Table 1000x1000x150mm Grade 1 | 1 | |
| 100-060-2 | PLATE | 1 | |
| 100-060-4 | PLATE | 1 | |
| 1000624 | LIQUID LIGHT GUIDE CABLE 3M LONG | 1 | |
| 10006262 | SCREWDRIVER SLOTTED AW4X100 | 1 | |
| 100066 | THIS IS NOT A TOOL | Not Available | Not Available |
| 10006663 | STAHLWILLE ADJUSTING PLIERS | 1 | |
| 10006837 | THIS IS NOT A TOOL | Not Available | Not Available |
| 11010006 | 405/4-1/4" EXTENSION BAR 4" | 2 | |
| 116-10006 | 4 CHANNEL MA OP MODULE | 1 | |
| 12010006 | 427/5-3/8" EXTENSION 5" LONG | 1 | |
| 13010006 | 509/3W-1/2" EXTENSION 3" WOBBLE | 1 | |
| 15-7600-1000 (60 HZ) 15-7602-1000 (50 HZ) | CABIN PRESSURE UNIT (TRONAIR) | 1 | |
| 15-7600-1000 (60 HZ) 15-7602-1000 (50HZ) ADAPTER K-1285 | CABIN PRESSURIZATION UNIT | 1 | |
| 1617-1000/6409 | HIGH POWER LOW FREQUENCY AMPLIFIER | 1 | |
| 162U1000-63 | THIS IS NOT A TOOL | Not Available | Not Available |
| 163U1000-63 | THIS IS NOT A TOOL | Not Available | Not Available |
| 163U1000-67 | LG BLH | 1 | |
| 163U1000-68 | LG BRH | 1 | |
| 18100060-3 | GAS MONITOR | 1 | |
| 19010006 | 4150.SCH-*SMO*1/4" SPARE PARTS, 1 SCREW | 1 | |
| 210-006 | CANOPY COVER (OVER-THE-TOP STYLE), extends to cover baggage door) G-model & up | 1 | |
| 310006 | MD2602-A Electric Driver (1/4 F/Hex) | 1 | |
| 3100060 | 1/2DRxT60 INT.TORX DRIVER SKT | 1 | |
| 310U2301-21(0.00614 INCH) | 0.00614 INCH | 1 | |
| 332A91310006 | SLING HOISTING MRP BTP HUB COMPACT | 1 | |
| 350A91-0006-01 | TOOL | 1 | |
| 3510006016 | TROTEC PC220 PARTICLE COUNTER | 1 | |
| 43210006 | 10765.6-6MM HEX KEY WRENCH EX LONG NP | 1 | |
| 47510006 | 4751.6-No6 FINE ELECTRONIC S'DRIVER | 1 | |
| 478-10006 | THIS IS NOT A TOOL | Not Available | Not Available |
| 479100 0-60 | LOAD CELL 60 KN | 1 | |
| 48010006 | 10750.1/2.6-TOMMY BARS FOR NO. 10750 6X7 - | 1 | |
| 50-1000-61 | 876;50-1000-61 F-15 Fuel Quantity Test Kit | 1 | |
| 5100060 | 3/4DR x T60 INT.TORX DR SOCKET | 1 | |
| 54100060 | 7160-CHARGER For Li-ion BATTERY | 1 | |
| 54100062 | 7162 - USB-CHARGER Li-Ion | 1 | |
| 60-0100-0664-5 | POLISHING CLOTH 15 | 1 | |
| 6110-00-631-7196 | CONTROL UNIT | 1 | |
| 62100-0600 | 10GB FRU Coplanar Extraction Tool | 1 | |
| 65304-RSK1000695-0000 | POSITIONING TOOL | 1 | |
| 65701-RSK1000695 | REMOVAL TOOL CORK BALANCE PLUG | 1 | |
| 65702-RSK1000695 | ARM/TULIP EXTRACTOR TOOL | 1 | |
| 69701-RSK1000695 | POSITIONING TOOL | 1 | |
| 7-562100063-603 | ALIGNMENT TOOL, | 1 | |
| 7-562100064-001 | PITCH CASE HOUSING | 1 | |
| 7-562100065-601 | BEARING CUTTING TOOL | 1 | |
| 7-562100068-001 | PILOT BODY SEAL | 1 | |
| 7-562100069-601 | PRESSURE GAUGE - IPAS | 1 | |
| 70010006 | 100/6-RIBBED COLD CHISELS | 1 | |
| 7005-5841-000 (64580) | BREAKOUT BOX | 1 | |
| 70210006 | 10842-DOLLY | 1 | |
| 70410006 | CADMIUMLHE5070 | 1 | |
| 71010006 | 900.6-SCREW EXTRACTOR | 1 | |
| 7181-0006 | 3/16 HEX JOBOLT TOOL | 1 | |
| 75701-RSK1000695-0000 | POSITIONING TOOL | 1 | |
| 8100068 | LT.TRUCK KIT | 1 | |
| 811-0006 | Piston | 1 | |
| 9230-10006-01 | BATTERY CHARGER UK AND EUROPE (78-8060-5797-8 FOR US) | 1 | |
| 9421000600 | P3 PRESSURE TRANSDUCER | 1 | |
| 96-321000-607 | TUBE, DE-ICE ASSY. W/ 2H30-6 VALAVE | 1 | |
| 9752100060 | THIS IS NOT A TOOL | Not Available | Not Available |
| 9892100060 | PLUG | 1 | |
| 9963610006 | CONNECTOR,PIN | 1 | |
| A110006 | JAK 100 KN | 1 | |
| A5796041000600 | SEAL | 1 | |
| AC 25-1009SW-02L-1000#/60BAR | ASHCROFT PRESSURE GAUGE 2.5IN DIAL, 1/4IN LOWER | 1 | |
| AD1000-612 | Air Data Accessories Kit | 1 | |
| AMM 64-10-00,6-5 | TOOL | 1 | |
| APC11000-6 | CONNECTING CABLE | 1 | |
| APT-20-1000-60G | THIS IS NOT A TOOL | Not Available | Not Available |
| AV10006-100 | TRIGGER ASSY | 1 | |
| BAH1-1000612 | 6IN HAND W/HANDLE CUT 1 | 1 | |
| BAH1-1000622 | 6IN HAND W/HANDLE CUT 2 | 1 | |
| BAH1-1000632 | 6" FLAT FILE SMOOTH | 1 | |
| BAS10006 | DIAMOND HONE SHARPENER | 1 | |
| BH110006 | ROUND FITCH BRUSH | 1 | |
| C1000-632 | Wrench Type Upsetters ( Description: For Slotted Rivnuts )( Size/diameter: #6 )( Thread: 6-32 ) | 1 | |
| C10006 | TOOL | 1 | |
| C10006-1 | PLUG EQUIPMENT - ENGINE EXHAUST, CFM LEAP - 1B | 5 | |
| C10006-2 | Plug assy | 1 | |
| C10006-3 | End plug assy | 1 | |
| C10006ASG | B737Max Exhaust cover( see C10005ASG) | 1 | |
| CRS SK601-10006-001 | TOOL | 1 | |
| D10006-04 | NUT | 1 | |
| D10006-12 | THIS IS NOT A TOOL | Not Available | Not Available |
| D1010006 | PLATFORM STAIRS 1,50/ HANDRAIL 60º 6 | 1 | |
| D1H10006 | TURNOVER ADAPTOR | 1 | |
| D2529009100061 | THIS IS NOT A TOOL | Not Available | Not Available |
| D2529009100062 | THIS IS NOT A TOOL | Not Available | Not Available |
| D2557121000600 | THIS IS NOT A TOOL | Not Available | Not Available |
| DMC1000-6 | .032" PRE-SET TENSION SAFE-T-CABLE® APPLICATION TOOL KIT | 2 | |
| DMC1000-625 | .062" Hydraulic Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| DMC1000-6R | .032" Adjustable Tension Safe-T-Cable® Application Tool Kit | 2 | |
| E3-1000670 | Clamp | 1 | |
| EM87100060A | TOOLS LEAKAGE TEST | 1 | |
| EM87100060A-01 | ADAPTER | 1 | |
| EM87100060A-02 | BLANKING CAPS | 1 | |
| EM87100060A-03 | HALF CLAMP | 1 | |
| EM87100060A-04 | HALF CLAMP | 1 | |
| EM87100060A-05 | BLANKING CAPS | 1 | |
| EM87100060A-06 | SHAFT | 1 | |
| EM87100060A-10 | CLAMP | 1 | |
| EM87100060A-11 | CLAMP | 1 | |
| EM87100060A-14 | EM87100060A-14 | 1 | |
| EM87100063A | SPECIAL TOOL | 1 | |
| EM87100067 | TEST CAP | 1 | |
| EM87100068 | TEST CAP | 1 | |
| EVCRB81-0006 | CROSSOVER PATCH CABLE | 1 | |
| F1000600-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| F1000600-2A | THIS IS NOT A TOOL | Not Available | Not Available |
| F1000600-54 | THIS IS NOT A TOOL | Not Available | Not Available |
| F1000600-55 | THIS IS NOT A TOOL | Not Available | Not Available |
| F1000654-55 | THIS IS NOT A TOOL | Not Available | Not Available |
| G0142710006 | KIT, AILERONS CHECK TEMPLATES | 1 | |
| G10006 | Exhaust cover | 1 | |
| G10006-1 | PROTECTIVE PLUG EQUIPMENT - THRUST REVERSER EXHAUST | 1 | |
| G10006-15 | PLUG - THRUST REVERSER EXHAUST DUCT, GENX-2B ENGINE | 4 | |
| G10006-3 | RH Plug Assy | 1 | |
| G1001010006-027 | APU INTAKE COVER | 3 | |
| G600-210006-1 | Kit - Water Separator Pressurization | 1 | |
| G600-710006-101 | ENGINE BUILD UP STAND | 1 | |
| G601-710006-101 | STAND, POWER PLANT BUILD-UP | 2 | |
| G601-R710006-101 | TOOL | 1 | |
| GER31000668 | EDGE,BLACK RUBBER HANDLE | 1 | |
| GSB1210006 | SERVICING UNIT DUAL CAN (SKYDROL) | 1 | |
| GSB2810006 | UNIT-FUEL TANK PRESSURE RELIEF TEST | 1 | |
| GSB3210006 | TOOL | 1 | |
| GSB6110006 | STAND-PROPELLER STATIONARY | 2 | |
| H150E-1000-6 | HELIPORTER | 1 | |
| HPR1000-6 | 10-1/2 EXTENSION TUBE | 1 | |
| IAE1F10006 | PUSHER | 1 | |
| J10006 | PROTECTIVE EQUIPMENT, GE90-115B ENGINE | 1 | |
| J10006-EXHAUST NOZZLE | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| J10006-INLET COVER | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| J10006-T/R PLUG | PROTECTIVE EQUIPMENT,GE90-115B ENGINE | 1 | |
| K10006 | TOOL | 1 | |
| K10006-1 | TETHERING EQUIPMENT - UPPER AFT FUSELAGE | 1 | |
| K10006-17 | TETHERING EQUIPMENT - UPPER AFT FUSELAGE | 1 | |
| K10006496 | ENGINE ROTATION ATTACHMENT | 1 | |
| K10006546 | ILP-2 LIGHT SOURCE ASSEMBLY | 1 | |
| KL0021-0006 | THRUSR BEARING | 1 | |
| KW1000647 | VENTILATOR FAN 450MM | 1 | |
| LH-10006 | Load Cell - 200000 lbs | 1 | |
| LSR100060 | WHEEL LOCK SOCKET | 1 | |
| M82100064 | JET FEMALE | 1 | |
| MT6020/10/006 | TOOL | 1 | |
| NAS1100-06-4 | SCREW | 1 | |
| PTRS1000-6 | BLADE LOCKING SCREW | 1 | |
| PTS1000-600 | COLLET BODY ASSEMBLY | 1 | |
| R5442/S,NS100,0-60 C | IMMERSION THERMOMETER | 1 | |
| RB900G1010006 | Engine Control Rig Pins (Set Of 10) | 1 | |
| RBW10006-P | Bearing Cutting Tool | 1 | |
| S103-1220100060 | THIS IS NOT A TOOL | Not Available | Not Available |
| S2211000600100 | TOOL | 1 | |
| SC10006 | CASEIH 3/16 STD 6PT SKT 1/4DR | 2 | |
| SC2199100060 | NYLON SPACER 1"OD x .650 ID x7 | 1 | |
| SE71-0006 | Boeing | 1 | |
| SEY11100-06 | PRESS ADAPTER | 1 | |
| SK601-10006-3 | LOWER AFT WING PLANK | 1 | |
| SK601-10006-3-5-6 | LOWER AFT WING PLANK -0 | 1 | |
| SK601-10006-5 | OUTBOARD REAR SPAR | 1 | |
| SK601-10006-6 | OUTBOARD REAR SPAR | 1 | |
| SK601R-10006 | BLOCK | 1 | |
| SK601R-10006-1 | TOOL STD NDT | 1 | |
| SN10006 | NH 3/16 STD 6PT SKT 1/4 DR | 1 | |
| SR100-06 | Warning Tape Reel Red & White | 1 | |
| ST-1000-6337 | BUCKING BAR | 1 | |
| ST1000-6118 | TOOL | 1 | |
| ST1000-6302 | Bucking Bar | 1 | |
| ST1000-6337-1 | Bucking Bar | 1 | |
| TDW10006 | TAP INSERT .535 | 1 | |
| TESA-01810006 | Tesa 01810006 - Analogue lever-type dial test indicator TAST Standard, Range - 0.8mm | 1 | |
| TF50B10006 | OBTURATOR | 1 | |
| TMH NA01-00-06 | TOOL | 1 | |
| TMH PM01-00-06 | AXLE | 1 | |
| U10-0069 | TORQUE WRENCH | 1 | |
| UGGEN10006 | ADAPTOR-TORQUE | 1 | |
| VFI10006 | CUSTOM FOAM KRA2055 BL YELLOW | 1 | |
| VT0250AA1-0006 | Movable Piston | 1 | |
| VU10-0060 | SPRAY EQUIPMENT | 1 | |
| WAVEB2G10006 | EDDIE BOLT THIMBLE .25 | 1 | |
| WBP10006E | CAST IRON SURFACE PLATE 450MMX300MM | 1 | |
| WS42-1000-6-IE24LI-1 | PA INSP ENCODER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
