| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-003 | THREADED SHANK ADAPTER DRILL | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 636-1000_30GSE | ENGINE MOUNT HOISTING DEVICE AF (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A10003005000 | MOORING KIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A10003900000 | MOORING FITTING FR 12 LH (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A10003900001 | MOORING FITTING FR 12 RH (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D10003000000 | COVER INLET COWL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D10003002000 | Cover Inlet Cowl (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S55305011-0003 | CALIBRATION BLOCK (CALIBRATION) | 1 | ||
| 00510-003-000 | HOOK SPANNER (D=155-230MM) | 1 | ||
| 00871-2031-0003 | TEST CIRCUIT CARD ASSEMBLY (MSO) | 1 | ||
| 01010003 | 40.3 - 1/4"DR X 3mm SOCKET,HEXAGON | 1 | ||
| 02100030 | 49.TX.T.30-3/8DRxT30 INT.TORX SDRIVER SKT | 1 | ||
| 02314-0011-0003 | ALIGNMENT SLEEVE | 2 | ||
| 02314-0011-0003PM | ALIGNMENT SLEEVE | 1 | ||
| 03100030 | 54.TX.T.30-1/2DRxT30 INT.TORX DRIVER SKT | 1 | ||
| 05-3005-1100-03 | OPTION 03, NO LONGER AVIALABLE | 1 | ||
| 05-3010-1100-03 | OPTION: HO, | 1 | ||
| 05-7008-1100-03 | OPTION: HO, | 1 | ||
| 05-7015-1100-03 | OPTION: HO, | 1 | ||
| 05-7023-1100-03 | OPTION: HO, | 1 | ||
| 050-03311-0003 | KPA 900 CONFIGURATION MODULE PROGRAMMER | 3 | ||
| 071-06021-0003 | ADAPTER TOOL | 1 | ||
| 08010003 | 1223-PHILLIPS BITS PH3 | 1 | ||
| 08310003 | 1262-PH3 POWERDRIVER BIT | 1 | ||
| 08410003 | 4051-PH3 PHILLIPS IMPACT BIT 3/8DR | 1 | ||
| 1.30100.0301 | HY-LITE 2 ILLUMINOMETER (INSTRUMENT) | 1 | ||
| 10-00303-101 | RING | 1 | ||
| 10-00375B | TR CS SLVR BRIT 25.75 EPIQ | 1 | ||
| 10-00377A | TR CX BRED BRIT 37.75 KEX | 1 | ||
| 10-00378 | TR CS RED KRXL LKR | 1 | ||
| 10-00397A | 30IN DWR TRM LATCH LVR BRT | 1 | ||
| 10-100-0369 | MOUNT SWIVEL LASETACH | 2 | ||
| 10-10003 | Bowers Granite Table 900x600x100mm Grade 2 | 1 | ||
| 100-0302-01 | TOOL | 1 | ||
| 100-0302-03 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 100-0376-00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1000-348 | DLRO10HD OHMMETER - 10A | 1 | ||
| 10003108 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 10003114 | Standard | 1 | ||
| 10003115 | Standard | 1 | ||
| 100032609010 | S/N 467 RIGID BOROSCOPE TOOL | 1 | ||
| 10003742 | DISC | 1 | ||
| 10003856 | MARKING PAINT MACHINE - NEW STRIPE | 1 | ||
| 1000386093 | TOOL | 1 | ||
| 1000386685 | TOOL | 1 | ||
| 1000386692 | TOOL | 1 | ||
| 1000386903 | TOOL | 1 | ||
| 106-1-1100-03 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 12010003 | 427/10-3/8" EXTENSION 10" LONG | 2 | ||
| 12L1000-36 | Dotco® Die Grinders (Exhaust type: Front) (Capacity: 1/2" Carb Burr 1" Mount Wheel) (Rpm (no load): 30000) (Collet: 1/4" Collet) (Overall length-weight: 6" (152mm) - 0.8 lbs (0.4 kgs)) (Add to cart: Add To Cart) | 1 | ||
| 12L1000-36RT | Dotco® Straight Routers (Rpm (no load): 34000) (Shank diameter capacity: 1/4") (Overall length: 6-3/4" (172 mm)) (Type: Front Exhaust 0.3 hp (.22 kW)) (Add to cart: Contact us to order) | 1 | ||
| 130-910003-1 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 130-910003-1130-910003-2 | EXHAUST COVER | 1 | ||
| 130-910003-2 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 13010003 | 509/10-1/2" EXTENSION 10" LONG | 1 | ||
| 133100-03 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 14100030 | TOOL-OETIKER | 1 | ||
| 15010003 | 559/4-3/4" EXTENSION 4" | 1 | ||
| 15C7603-1000 (380VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | ||
| 15H7603-1000 (380VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | ||
| 191-000-304RP | Mitutoyo 191-000-304RP - MRS-FCR25 Probe Changer | 1 | ||
| 191-000-381 | Mitutoyo 191-000-381 - REVO Scanning Probe | 1 | ||
| 191-000-387 | Mitutoyo 191-000-387 - SP-80 Scanning Probe | 1 | ||
| 210-003 | CANOPY COVER, over top type, 1960-61: w/struts, no rear window) | 1 | ||
| 2100_03_04 | CABLE, MIZ-21 TO MINI PROBE DRIVE | 1 | ||
| 2100030 | 3/8DRxT30 INT.TORX SDRIVER SKT | 1 | ||
| 212-92010-003.1 | MAIN LANDING GEAR SPECIAL WRENCH | 1 | ||
| 262610003 | REFILL BLADES (SIZE 3) | 1 | ||
| 291-101-000-311 | VIBROMETER | 1 | ||
| 2971-0003W01 | ADJUSTMENT STEERING GSE | 1 | ||
| 31000-31 | TOOL | 1 | ||
| 310003 | 310003 | 1 | ||
| 3100030 | 1/2DRxT30 INT.TORX DRIVER SKT | 1 | ||
| 31000300 | BF-CUTTER | 1 | ||
| 31000300PT | BF-CUTTER | 1 | ||
| 31000305 | BF-CUTTER | 1 | ||
| 314-07210-003 | LATCHUNG, AMMO BOX | 1 | ||
| 314STD-21-0003 | AIR CONDITIONING-REPLACEMENT OF THE FLEXIBLE DUCT OF THE EMERGENCY VENTILATION SYSTEM | 1 | ||
| 33010003 | 509/10.IMP-1/2" IMPACT ACCESSORY TOOLS | 1 | ||
| 35-25141-0003-51 | TOOL | 1 | ||
| 35-92281-0003 | ADAPTER | 1 | ||
| 35-93171-0003 | Docks, Maintenance | 1 | ||
| 35010003 | 560/13.IMP-3/4" IMPACT EXTENSTION 13" | 1 | ||
| 3529100030 | TOOL SET, M3P | 1 | ||
| 37010003 | 759/15IMP-DISC*1.1/2" SD IMPACT EXT 15" | 1 | ||
| 410-0030-501 | DIGITAL FUNCTION ANALYZER DFA-429 HILDA | 1 | ||
| 4100210-003-VISW | SOFTWARE, DOWN-LOAD - VACUUM WASTE SYSTEM | 1 | ||
| 43210003 | 10765.3-3MM HEX KEY WRENCH EX LONG NP | 1 | ||
| 44010003 | 12910.GR..3-ADJUSTABLE HOOK SPANNR 95-165 | 1 | ||
| 471-00037 | BOARD: PRINTED CIRCUIT, CONVERTER | 1 | ||
| 471-00038 | BOARD: PRINTED CIRCUIT, SWITCH | 2 | ||
| 471-00038=5A | BOARD: PRINTED CIRCUIT, SWITCH | 1 | ||
| 47510003 | 4751.3-No3 FINE ELECTRONIC S'DRIVER | 1 | ||
| 47689312710003 | CONICAL REAMER | 1 | ||
| 5210003575951 | DEPTH GAUGE | 1 | ||
| 522-4610-003 | RADIO ALTIMETER TEST SET UNIT | 1 | ||
| 55-1000-30 | TEST SET,FLOW RATE INDICATING METER,FIELD TYPE | 1 | ||
| 565-910-003 | CABLE | 1 | ||
| 573-616 10-210 0,03 | MITUTOYO | 1 | ||
| 59010003 | 70.V.3-SQUARE DRIVE UNIT 3/8"-3/8" | 1 | ||
| 604C5910-003 | TOOL | 1 | ||
| 62100-0300 | IDT - MANUAL - HANDTOOL | 1 | ||
| 636-1000-30GSE | ENGINE MOUNT HOISTING DEVICE AFT | 8 | ||
| 636-1000-31GSE | BEAM SUPPORT ENGINE MOUNT | 6 | ||
| 636-1000-32GSE | BLOCKING DEVICE - AFT ENGINE MOUNT PIN | 6 | ||
| 636-1000-33GSE | REAR MOUNT PIN EXTRACTOR | 5 | ||
| 63601FE15100030 | CENTERING TOOL | 1 | ||
| 68D010003-1003 | AXLE JACK ADAPTER | 1 | ||
| 69010003 | BZ.153-SPINDLE FOR PIPE CUTTER | 1 | ||
| 7-11-0003 | SAFETY STAY STA5211(FR85) | 1 | ||
| 7-562100030-601 | STAKING TOOL | 1 | ||
| 7-562100035-601 | SEAL R/I TOOL | 1 | ||
| 7-562100036-601 | TOOL SERVICE, | 1 | ||
| 7-562100037-601 | ROD END CENTERING FORK | 1 | ||
| 7-562100038-601 | INTERCOMMMUNICATION SYSTEM | 1 | ||
| 703A91-0003-22 | PIN,SAFETY | 1 | ||
| 710.100.033 | DESCALING SYSTEM TOOL WASTE LINE, CLEAN VACLAV II | 1 | ||
| 7100034271 | MIXING NOZZLE 37 ML/42 ML/ 50 ML | 1 | ||
| 7100034272 | 3M 051115-81467 Scotch-Weld EPX Helical White 43mL Mixing Nozzle for DP2216 | 1 | ||
| 71010003 | 900.3-SCREW EXTRACTOR | 1 | ||
| 71210-00300 | AVDEL G2 RIVET GUN FOR 1/8 MBC RIVETS | 1 | ||
| 71210-00305 | G2 TOOL | 1 | ||
| 71310003 | 906/3-SPARE PARTS | 1 | ||
| 801000-3 | Engine Control (Fuel Metering Unit) | 6 | ||
| 804.100.03 | CART - INFLATION, TIRE, NITROGEN | 1 | ||
| 810-0032-004 | CPAS | 1 | ||
| 811-0003 | Disc | 1 | ||
| 8310003 | PH3 POWERDRIVER BIT | 1 | ||
| 8410003 | PH3 PHILLIPS IMPACT BIT 3/8DR | 1 | ||
| 84100032909 | SWAGING TOOL FOR BACB10JG12AZJ03G | 1 | ||
| 8810003053 | SUPPORT | 1 | ||
| 8810003065 | EXTRACTOR | 1 | ||
| 8810003067 | EXTRACTION ROD | 1 | ||
| 89010003 | NON-SLIP MAT | 1 | ||
| 9100030-072W | T3CAS TERRAIN DATA BASE (TAWS) | 1 | ||
| 9100035-063W | (COMPACT FLASH CARDS) | 1 | ||
| 95-92071-0003 | RUDDER ZERO SETTING GAUGE - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | ||
| 95-92121-0003 | MAINTENANCE ENGINE STAND L/H | 1 | ||
| 95-92191-0003 | UNLOCKING TOOL, LATCHING MECHANISM RAMP DOOR | 1 | ||
| 95-92201-0003 | EXTERNAL WING MODULE LH | 1 | ||
| 9581000300 | EN-JOINT TORIQUE | 1 | ||
| 9682010003 | 'O' RING | 1 | ||
| 9777100034 | THREADED UNION | 1 | ||
| 9892100030 | PLUG | 1 | ||
| 98A10003000000 | COVER BLANKING-ENGINE EXHAUST NOZZLE | 1 | ||
| 98A10003001000 | COVER,BLANKING-ENGINE AIR INTAKE | 1 | ||
| 98A10003002000 | COVER,BLANKING-PRE-COOLER AIR OUTLET | 3 | ||
| 98A10003002001 | PRECOOLR OUTLET COVER | 5 | ||
| 98A10003002200 | COVER PLATE | 1 | ||
| 98A10003002202 | HANDLE | 1 | ||
| 98A10003002204 | HANDLE | 1 | ||
| 98A10003002208 | SPRING | 1 | ||
| 98A10003002210 | COVER PLATE | 1 | ||
| 98A10003003000 | COVER,BLANKING-AIR CONDITIONING FRESH AIR INTAKE | 6 | ||
| 98A10003003200 | COVER PLATE | 1 | ||
| 98A10003003201 | HOLDER | 1 | ||
| 98A10003003202 | HOLDER | 1 | ||
| 98A10003005000 | MOORING KIT | 1 | ||
| 98A10003006000 | COVER-AIR INTAKE | 1 | ||
| 98A10003007000 | COVER-AIR INTAKE | 1 | ||
| 98A10003010000 | COVERS,PRE-COOLER | 1 | ||
| 98A10003500000 | COVER-STATIC PROBE | 8 | ||
| 98A10003500100 | TOOL | 1 | ||
| 98A10003500202 | TOOL | 1 | ||
| 98A10003500208 | PROTECTIVE PLATE | 1 | ||
| 98A10003500210 | PROTECTIVE PLATE | 1 | ||
| 98A10003500216 | TOOL | 1 | ||
| 98A10003500218 | TOOL | 1 | ||
| 98A10003500220 | PROTECTIVE PLATE | 1 | ||
| 98A10003501000 | COVER,BLANKING-GE ENGINE FAN EXHAUST | 1 | ||
| 98A10003900000 | FITTING-FR 12A LH | 1 | ||
| 98A10003900001 | FITTING-FR 12A RH | 1 | ||
| 98A10003900113 | SQUARE-HEAD BOLT | 1 | ||
| 98A10003900114 | SLEEVE | 1 | ||
| 98A10003902000 | FITTING, FR.27 - 36 | 1 | ||
| 98A10003903000 | FITTING, FR.76 LH | 1 | ||
| 98A10003903001 | TETHERING FITTING FR 76 | 1 | ||
| 98A10003904000 | FITTING, FR.76 RH | 1 | ||
| 98A10003905000 | FITTING, FR.59 LH | 1 | ||
| 98A10003906000 | FITTING, FR.59 RH | 1 | ||
| 98A10003906200 | ADAPTOR | 1 | ||
| 98A10003907200 | ADAPTOR | 1 | ||
| 98A10003909200 | ADAPTOR | 1 | ||
| 98A10003910200 | ADAPTOR | 1 | ||
| 98A10003911200 | ADAPTOR | 1 | ||
| 98A27508010003 | SIGNAL FLAG | 1 | ||
| 98A27601000301 | CLAMP HALF | 1 | ||
| 98D10003000 | TOOL | 1 | ||
| 98D10003000000 | COVER-INLET COWL ENGINE | 9 | ||
| 98D10003001 | TOOL | 1 | ||
| 98D10003001000 | COVER-INLET COWL ENGINE | 13 | ||
| 98D10003001012 | TOOL | 1 | ||
| 98D10003002 | TOOL | 1 | ||
| 98D10003002-5A | COVER | 1 | ||
| 98D10003002-5B | COVER | 1 | ||
| 98D10003002000 | COVER - INLET COWL ENGINE | 17 | ||
| 98D100030020000 | COVER | 1 | ||
| 98D10003002216 | Rope | 2 | ||
| 98D10003003 | TOOL | 1 | ||
| 98D10003003000 | COVER - SLIP-ON, AOA SENSOR | 22 | ||
| 98D10003003VEL | COVER - SLIP-ON, AOA SENSOR | 1 | ||
| 98D290035010003 | TOOL | 1 | ||
| 98D34100030000 | TOOL | 1 | ||
| 98F10003901000 | TOOL | 3 | ||
| 98L32101000350 | PROTECTOR | 1 | ||
| 98L32101000356 | PROTECTOR | 1 | ||
| 98P10003003000 | PIN SIDE STICK LOCKING | 1 | ||
| 98S10003000 | TOOL | 1 | ||
| 98S10003000000 | TOOL | 1 | ||
| 98S55305011-0003 | CALIBRATION BLOCK | 1 | ||
| 98S710003008 | R/I ENG' SHOCK MOUNT | 1 | ||
| 98S710003009 | R/I ENG' SHOCK MOUNT | 1 | ||
| 98S710003010 | GO-NO-GO ENG' SHOCK MOUNT | 1 | ||
| 99-E0810-003 | WINDSHIELD TOOL | 1 | ||
| 99D55109001000-3 | AIRBUS CARBON STANDARD, ALL PT4 51-10-06:FIG402 PG404, TAPE MATERIAL #3 | 1 | ||
| 99D57204110003 | GUIDE BLOCK | 1 | ||
| A3221000320000 | WASHER | 1 | ||
| AIT710003 | HOLD OPEN BRACE, CFM56-5C COWL DOORS | 1 | ||
| AN100036 | COVER | 1 | ||
| ARM0110003501101 | Probe RMS 11x35mm | 1 | ||
| AT-10-003 | RETRACTABLE TRIMMING KNIFE | 1 | ||
| AT210003-1 | Pin | 1 | ||
| AV10003 | VALVE | 1 | ||
| BAS10003 | EDGEMATE KNIFE SHARPNER | 1 | ||
| BH110003 | FITCH BRUSH NO.6 | 1 | ||
| BS10-10-00-3 | TOOL | 1 | ||
| BS1453401210003 | THIS IS NOT A TOOL | Not Available | Not Available | |
| C10003 | Exhaust Plugs - Auxiliary Power Unit | 1 | ||
| CA80100-0301 | DISTANCE PIECE (TEFLON) | 1 | ||
| CDI10003101 | CLAMP | 1 | ||
| CG9271501-0003 | TOOL AILERON BACKLASH ARM | 1 | ||
| CG9273101-0003 | ELEVATOR BACKLASH TOOL | 1 | ||
| CG9471101-0003 | FTIS COOLING FAN KIT | 1 | ||
| CJMD110-003 | SUN SCREEN | 2 | ||
| CJMD310-003 | INTERIOR WINDSHIELD COVER | 1 | ||
| CLRE03-35-34001-0003 | RUDDER SETTING GAUGE | 1 | ||
| D2H 10003 | STORAGE TROLLEY | 1 | ||
| D5211031000340 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D52111000104W4100-03 | BOLT | 1 | ||
| E7510003 | BOX OF 5 GR BOX(100 STRAIGHT BLADES) | 1 | ||
| E8110003 | WELDING/INSTALLATION KIT (FLOOR MAT) | 1 | ||
| ETPU100-03C | THIS IS NOT A TOOL | Not Available | Not Available | |
| EWP1000361 | P1000 36MO EXT WAR SBY ONLY | 1 | ||
| EXBD400-54010−003 | CALIBRATION TEST STANDARD | 1 | ||
| F1000350-01 | NO SMOKING/FASTEN SE | 1 | ||
| F26821000-3 | TOOL TO INSTALL/REMOVE BUSH ASSY | 1 | ||
| FCL-P1000 3 | FIBER OPTIC CLEANING | 1 | ||
| G0000010003 | JACK ADAPTER, AIRCRAFT LIFTING (FR. 29) | 1 | ||
| G0142710003 | KIT, AILERON CONTROL LEVER LOCKING | 1 | ||
| G0422210003 | SLEEVE, MLG AXLE | 1 | ||
| G0433210003 | SLEEVE, MLG AXLE (NSN1730-15-198-0531) | 1 | ||
| G10003 | Boeing | 1 | ||
| G10003-1 | PROTECTIVE COVER - ENGINE INLET, GE GEnx-2B | 5 | ||
| G10003-2 | Inlet cover | 1 | ||
| G1001010003-001 | L/H Pitot & Standby Pitot Cover Assy | 1 | ||
| G600-100030-143 | PROTECTOR - ADG BLADE | 3 | ||
| G600-100033-15 | PROTECTOR STATIC PRESSURE SENSOR | 1 | ||
| G600-100039-3 | PITOT HEAD COVER | 1 | ||
| G600-710003-1 | THREAD PROTECTOR KIT | 1 | ||
| G601-100035-17 | FUEL TAIL TANK PLUG | 3 | ||
| G601-210003-1 | PRESS CAP ADAPTER | 1 | ||
| GAT10003 | KNIFE SHARPN | 1 | ||
| GMFS1201001000300 | STATIC COVER ATR72-600 | 1 | ||
| GPSG-1000-3 | GPSG-1000-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | ||
| GSB1210003 | COUPLING-QDIS RESERVOIR SERVICING | 2 | ||
| GSB2810003 | DETECTOR-GAS | 1 | ||
| GSB3210003 | TARGET-NEAR/FAR TEST | 1 | ||
| GSB6110003 | ADAPTER PROPELLER TORQUE | 2 | ||
| GSB7610003 | TOOL-PLA RIGGING | 2 | ||
| GSE1000348 | MAIN GEAR TIRE COVER- | 1 | ||
| GSE1000349 | NOSE GEAR TIRE COVER- | 1 | ||
| GSE1000391 | ENGINE INLET COVER-GSE1000391 | 1 | ||
| GSP-100-03-00-00-045 | GASPER | 1 | ||
| GWL3810003 | TOOL | 1 | ||
| H150E-1000-3 | HELIPORTER | 1 | ||
| H250E-1000-3 | H250E HELIPORTER - ALL POCKET (CROSSTUBE LIFT) | 1 | ||
| H250T-1000-3 | H250T3 HELIPORTER - TOWABLE MILITARY SERIES (MQ-8C) | 1 | ||
| H250T3-1000-31 | QUICK RELEASE PIN ASSEMBLY | 1 | ||
| HPICAT40EM1000300 | HPICAT40EM1000300 | 1 | ||
| IAE1F10003 | PUSHER-INSTALLATION | 13 | View Images / Tech Appraisal | |
| IAE1F110003 | TOOL | 1 | ||
| J10003-1 | CHECK DRG / REV. 03.12.99 | 1 | ||
| J10003-18 | TOOL | 1 | ||
| J10003-8 | TETHERING EQUIPMENT - ENGINE PYLON, AIRPLANE RECOVERY | 1 | ||
| K10003 | TOOL | 1 | ||
| K10003-1 | TETHERING EQUIPMENT - ENGINE PYLON, AIRPLANE RECOVERY | 5 | ||
| K10003-1,-13 | EQUIP TETHERING PYLO | 1 | ||
| K10003-13 | TETHERING EQUIPMENT - ENGINE PYLON, AIRPLANE RECOVERY | 1 | ||
| K10003-21 | TETHERING EQUIPMENT - ENGINE PYLON, AIRPLANE RECOVERY | 1 | ||
| KW 1000300 | HALF MASK DOUBLE | 1 | ||
| KW 1000326 | CHEMICAL SPLASH GOGGLE | 1 | ||
| KW1000322 | SAFETY HELMET, BLUE COLOUR | 1 | ||
| LSR100030 | SOCKET | 1 | ||
| LZSA1000-3 | TDK | 1 | ||
| M130100.0301 | SYSTEM, HY-LOTE MONITORING | 1 | ||
| M82100030 | TUBE | 1 | ||
| M82100031 | SPECIAL COUPLING | 1 | ||
| M82100036 | SPECIAL TOOL | 1 | ||
| M82100037-020 | SPECIAL PLUG | 1 | ||
| MOI1010003 | 1/4-20 BUTTERFIELD TAPER | 1 | ||
| MSP-1000-303-E | WATER PRESSURE PLUG | 1 | ||
| P910003046103 | FLOW CONTROL VALVE | 1 | ||
| P910003066100 | FLOW CONTROL VALVE | 1 | ||
| P910003160005 | VALVE | 1 | ||
| PCW-P100039P | LOGITECH S150 DIG USB SPEAKERS | 1 | ||
| PRHI10-CE200331-0003 | Pruebas fugas earth end | 1 | ||
| PT-SWANDSUPPORT-1000-3YR | PT-SWANDSUPPORT-1000-3YR;PathTrak Software Maintenance and Support for 1000 Port Server - 3 year | 1 | ||
| PTRS1000-3 | GUARD BLADE | 1 | ||
| PTRS1000-30 | CYLINDER UNIT | 1 | ||
| PTRS1000-31 | FEED BUMPER A | 1 | ||
| PTRS1000-32 | END CAP | 1 | ||
| PTRS1000-33 | O - RING | 1 | ||
| PTRS1000-34 | O - RING | 1 | ||
| PTRS1000-35 | VALVE STEM | 1 | ||
| PTRS1000-36 | O - RING | 1 | ||
| PTRS1000-37 | VALVE SEAL | 1 | ||
| PTRS1000-38 | C - RING | 1 | ||
| PTRS1000-39 | O - RING | 1 | ||
| PTS1000-300 | INTERNAL ASSEMBLY KIT | 1 | ||
| PTS1000-302 | PACKING | 1 | ||
| PTS1000-303 | BOTTOM STEM VALVE | 1 | ||
| PTS1000-304 | DISCHARGE SHEET | 1 | ||
| PTS1000-306 | VALVE | 1 | ||
| PTS1000-307 | TOP STEM VALVE | 1 | ||
| PTS1000-308 | RESONATOR | 1 | ||
| PTS1000-309 | END CAP | 1 | ||
| PTS1000-310 | CYLINDER UNIT | 1 | ||
| PTS1000-320 | PISTON ASSEMBLY | 1 | ||
| PTS1000-330 | SPRING UNIT | 1 | ||
| PTT10L100036 | DOTCO INLINE GRINDER | 1 | ||
| PWC100030 | tool | 1 | ||
| PWC100031 | tool | 1 | ||
| PWC100032 | tool | 1 | ||
| PWC100033 | tool | 1 | ||
| PWC100034 | tool | 1 | ||
| PWC100035 | tool | 1 | ||
| PWC100036 | tool | 1 | ||
| PWC100037 | tool | 1 | ||
| PWC100038 | tool | 1 | ||
| RBEVR-L11-0010-003-B | Spacer | 1 | ||
| RBW10003 | AW139 Main Landing Gear Gag Bar Set | 2 | ||
| ROK1021000/3 | MULTICHIP MODULE SPL | 1 | ||
| RSABG0003 /C10003 | PLUG - APU EXHAUST | 1 | ||
| RSG-01000-3-SIKA | 3-legged Sling | 1 | ||
| S1201001000300 | STATIC PORT COVER | 3 | ||
| S1201001000300-CL | STATIC PORTS COVER | 1 | ||
| S920010-003 | KIT- FLASHROM, SCS | 1 | ||
| SB295610003K01 | SERVICE BULLETIN KIT | 1 | ||
| SB295610003K02 | SERICE BULLETIN KIT | 1 | ||
| SE71-0003 | Boeing | 1 | ||
| SENTRY-RSS-AWS-1000-3-M | SENTRY-RSS-AWS-1000-3-M;Contract Term for SENTRY-RSS-AWS-1000-3 | 1 | ||
| SEY11100-03 | ACME SPINDLE M12XP1.75 | 1 | ||
| SIP01-00030 | CASTOR | 1 | ||
| SP510003 | HAMMER CASE BUSHING | 1 | ||
| ST1000-3020 | Bucking Bar | 1 | ||
| ST1000-3099 | TOOL | 1 | ||
| STL610003 | FACE CAP FOR TRIDENT | 1 | ||
| TDR1000/3 | METALLIC TIME-DOMAIN REFLECTOMETER TDR CABLE TESTER | 1 | ||
| TDW10003 | TAP INSERT .25 | 1 | ||
| TESA-00810003 | Tesa 00810003 IMICRO with Analogue Indication, Metric - 10-12mm | 1 | ||
| TF50B10003-1A1 | TOOL | 1 | ||
| TMH NA01-00-03 | TOOL | 1 | ||
| TMH PM01-00-03 | TOOL | 1 | ||
| TMH PR01-00-03 | TOOL | 1 | ||
| TMHBS10-10-00-3 | TOOL | 1 | ||
| TMHDI31-00-03 | PISTON | 2 | ||
| TWS10003101 | CLAMP STEPLESS LOW PROFILE | 1 | ||
| TWS110003 | RS232 SERIAL CABLE | 1 | ||
| UGGEN10003 | PIN-SHIPMENT | 1 | ||
| VE00-01-95-46101-0003 | RIGGING FEELER GAGE, ELEVATOR CONTROL | 1 | ||
| VE00-03-95-46101-0003 | RIGGING FEELER GAGE, ROLL CONTROL | 1 | ||
| VEOO-02-95-46101-0003 | RIGGING FEELER GAGE, RUDDER CONTROL | 1 | ||
| VIU100030DSTS | 3KW DSTS INFRA-RED UNIT | 1 | ||
| VR-L11-0010-003 | PLAIN WASH | 1 | ||
| VR-L11-0010-003-B | Spacer | 1 | ||
| WAS6310-0032 | BUSHING | 1 | ||
| WBP10003D | GRANITE SURFACE PLATE GRADE 1-600MM X 450MM | 1 | ||
| WS68A110003 | VERTICAL STABLIZER DOLLEY | 1 | ||
| XL1000 3D | XL1000 3D PRINTER | 1 | ||
| YA31000-3 | USB UPDATE CABLE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
