| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10012 | BEARING NEEDLE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 95S71210012001 | SPECIAL WRENCH | 1 | |
| (CALIB) U8100125 | OMNISCAN POUR NTM 57-29-07 (CALIBRATION) (CALIBRATION) | 1 | |
| 00-010012 | UT CABLE | 1 | |
| 00510-012-000 | HEAD | 1 | |
| 010-01215-04 | THIS IS NOT A TOOL | Not Available | Not Available |
| 010012829100 | 100A-3/4x25/32 OE WRENCH 220MM | 1 | |
| 01010012 | 40.12 - 1/4"DR x 12mm SOCKETS, HEXAGON | 1 | |
| 01410012 | 40.A.3/16-1/4DR x 3/16" HEX SOCKET | 1 | |
| 02-1875-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-2500-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-2520-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-3125-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-3750-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-5000-100-1250 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02010012 | 45.12-3/8DR x 12mm SOCKET BI-HEX | 1 | |
| 02110012 | 456.12-3/8DR x 12mm HEX SOCKET | 1 | |
| 03010012 | 50.12-1/2DR x 12mm SOCKET BI-HEX | 1 | |
| 0310012786 | TOURQE RANGE 100-800 (INLB) | 1 | |
| 07-110-0120 | SMART CABLE BANANA PLUG ADAPTER | 1 | |
| 09C-1001-2 | TOOL | 1 | |
| 09C-1001-201 | TOOL | 1 | |
| 10-0120-00 | CALIBRATION BLOCK | 1 | |
| 10-0121-00 | CALIBRATION BLOCK | 1 | |
| 10-01275B | TR CS SLVR BRIT 19.336 KECN | 1 | |
| 10-01277A | TR CX COPPER 37.75 KEX | 1 | |
| 10-01278 | TR CS ORANGE KRXL LKR | 1 | |
| 10-01297A | 62IN DWT TRM LATCH LVR BLK | 1 | |
| 100-125 | INSIDE MICROMETERS | 1 | |
| 100-125-5611 | ORING | 1 | |
| 1000-100-12 | TOOL | 1 | |
| 10012-10 | MLG BRAKE PRESSURE TEST SET | 1 | |
| 1001217-1T2 | BALANCE ARBOR. HS | 1 | |
| 1001224-1T3 | BALANCE ARBOR. HS | 1 | |
| 1001235-1T2 | BALANCE ARBOR SET. | 1 | |
| 1001236-1T5 | BALANCE ARBOR. HS | 1 | |
| 1001246-1T280 | Outlet Cap | 1 | |
| 1001246-1T282 | Inlet Cap | 1 | |
| 1001246-3-B5 | Bushing Tool (4 IT) | 1 | |
| 1001246-3P | Protractor Holder | 1 | |
| 1001246-HFP | PIN HOLDING FIXTURE | 1 | |
| 1001246-X | Pressure Valve | 1 | |
| 10012463 | THIS IS NOT A TOOL | Not Available | Not Available |
| 1010012 | 1/4"DR x 12mm SOCKETS, HEXAGON | 1 | |
| 1038-100-12 | TOOL | 1 | |
| 11010012 | 405/6W-1/4" EXTENSION 6" WOBBLE | 3 | |
| 11010012 STAH | 405/6W PRAILGINIMAS STAHLWILLE | 1 | |
| 1410012 | 1/4DR x 3/16" HEX SOCKET | 1 | |
| 186A1001-24 | THIS IS NOT A TOOL | Not Available | Not Available |
| 19010012 | 4151-SPARE PARTS SET FOR RATCHET | 1 | |
| 2010012 | 3/8DR X 12MM SOCKET BI-HEX | 1 | |
| 210-012 | EXTENDED CANOPY COVER, over-top type, extends to cover baggage door | 1 | |
| 2100-1220-02 | THIS IS NOT A TOOL | Not Available | Not Available |
| 2110012 | 3/8DR X 12MM HEX SOCKET | 1 | |
| 22010012 | STREAMER FIRE BOTTLE ISOLATION *** | 1 | |
| 23010012 | 50.IMP.12-1/2DRx 12mm HEX IMP SOCKET | 1 | |
| 25G9910012-001 | JACK PAD WING | 2 | |
| 25G9910012-01 | JACK PAD WING | 1 | |
| 27010-012-000 | BRACE SET ASSY | 1 | |
| 2980382100120 | CAP ASSY PUSH | 1 | |
| 3010012 | 1/2DR x 12mm SOCKET BI-HEX | 1 | |
| 310012 | MD3204-A Electric Driver (1/4 F/Hex) | 1 | |
| 310012786 | 100-800 | 1 | |
| 365A31001202Q | THIS IS NOT A TOOL | Not Available | Not Available |
| 407BF-2100-12 | CLEVIS | 1 | |
| 427BF-2100-12 | CLEVIS ASSEMBLY | 1 | |
| 43210012 | 12MM HEX KEY WRENCH EX LONG NP | 1 | |
| 4AS9910012-005 | PAD, JACK MAIN - ASTRA / G200 | 3 | |
| 5100-125-RT | THIS IS NOT A TOOL | Not Available | Not Available |
| 5100-125-WL | THIS IS NOT A TOOL | Not Available | Not Available |
| 600100129 | RADIAL CLEARENCE GAGE BENCH | 1 | |
| 612A51-0012-2 | Seal | 1 | |
| 671100122 | RICAMBIO PERMASWAGE PER HEAD ASSY | 1 | |
| 70010012 | 100/12-RIBBED COLD CHISELS 12x300 | 1 | |
| 70210012 | 10865-DOLLY | 1 | |
| 7100123356 | 3M 078371-62103 Virtua 11328-00000-20 Clear Temples IO Hard Coat Lens Safety Glasses | 1 | |
| 77000D92001010012 | RAT KABEL | 1 | |
| 79000D92001010012 | HYDRAULIK KABEL | 1 | |
| 910-012 | THIS IS NOT A TOOL | Not Available | Not Available |
| 910012-1 | CABLE ASSEMBLY | 1 | |
| 9562410012 | CHAIN | 1 | |
| 95S71210012001 | Special Wrench | 3 | |
| 9610012200 | RING | 1 | |
| 9752100120 | THIS IS NOT A TOOL | Not Available | Not Available |
| 98A09001001200 | LOCKING ASSY | 1 | |
| 98A09001001201 | BUSHING | 1 | |
| 98A29001001222 | TOOL | 1 | |
| 98A29001001250 | UNIT FILLING-AIRCRAFT BRAKE SYSTEM | 1 | |
| 98A29001001254 | FUNNEL | 1 | |
| 98A29001001254REP1.0 | FUNNEL | 1 | |
| 98A29001001254REP1.01 | FUNNEL | 1 | |
| 98A32001001200 | ADAPTOR-GEAR WHEEL POSITIONING ON DOLLY HOIST | 3 | |
| 98A32101001200 | DEVICE | 1 | |
| 98A32201001200 | CHARIOT DE MANUTENTION ATTERISSEUR | 1 | |
| 98A52208001001-25 | TOOL | 1 | |
| 98D26203001001-210 | TOOL | 1 | |
| 98D26203001001-220 | TOOL | 1 | |
| 98D26203001001-230 | TOOL | 1 | |
| 98D26203001001-260 | TOOL | 1 | |
| 98F10001001202 | KNOBS | 1 | |
| 98F10001001204 | TOOL | 1 | |
| 98F32101001200 | BULLETS | 1 | |
| 98F32101001214 | BULLET | 1 | |
| 98F32201001200 | PROTECTIVE SLEEVE | 1 | |
| 98F32201001202 | PROTECTIVE SLEEVE | 1 | |
| 98F32201001204 | LOCKING BOLT | 1 | |
| 98F32201001206 | LOCKING BOLT | 1 | |
| 98F54001001202 | FLOAT FORM | 1 | |
| 98F71201001202 | MANDATORY SIGN | 1 | |
| 98F71201001206 | MANDATORY SIGN | 1 | |
| 98F71201001210 | MANDATORY SIGN | 1 | |
| 98F71201001222 | WRENCH | 1 | |
| 98F71201001224 | WRENCH | 1 | |
| 98F71201001234 | MANDATORY SIGN | 1 | |
| 98F71201001252 | MANDATORY SIGN | 1 | |
| 98F71201001254 | TOOL | 1 | |
| 98F71201001256 | TOOL | 1 | |
| 98F71201001258 | ADAPTER | 1 | |
| 98F71201001260 | ADAPTER | 1 | |
| 98F71201001262 | ADAPTER | 1 | |
| 98L10001001200 | PROTECTION SONDE DERAPAGE COVER-SLIDING PROBE | 1 | |
| 98L27601001200 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | |
| 98L27601001202 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | |
| 98L27601001204 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | |
| 98L27601001206 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | |
| 98L27601001208 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | |
| 98L27601001210 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | |
| 98L27801001200 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001202 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001204 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001206 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001208 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001210 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001212 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001214 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001216 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27901001200 | DISQUE | 1 | |
| 98L27901001202 | CALE BIAISE | 1 | |
| 98L32101001200 | AVIATION TOOL | 1 | |
| 98L32101001214 | GUIDE | 1 | |
| 98L7810H010-012 | SHIPPING BOX | 1 | |
| 98S57003001100-12-REVB0 | SUPPORT TIE FITTING | 1 | |
| 98S71210012001 | SPECIAL WRENCH | 1 | |
| 98V10001001208 | THIS IS NOT A TOOL | Not Available | Not Available |
| 99A32401001201 | PEDAL STRUCTURE COMP | 1 | |
| 99A32401001220 | NEEDLE MARKER RH | 1 | |
| 99A32401001270 | NEEDLE MARKER LH | 1 | |
| A109BF-2100-12 | DOUBLER | 1 | |
| A21001-2 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-20 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-21 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-22 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-23 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-23-CM | 012THK A36 | 1 | |
| A21001-24 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-24-CM | 012THK A36 | 1 | |
| A21001-25 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-26 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-27 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-28 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A21001-29 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | |
| A25421001-2 | TOOL | 1 | |
| A25431001-2 | TOOL | 1 | |
| A25441001-2 | TOOL | 1 | |
| A25451001-2 | TOOL | 1 | |
| A51001-20 | SUPPORT ASSY | 1 | |
| A51001-21 | OPP-20 | 1 | |
| A51001-22 | SUPPORT ASSY | 1 | |
| A51001-23 | OPP-22 | 1 | |
| A51001-24 | SUPPORT | 1 | |
| A51001-25 | OPP-24 | 1 | |
| A71001-20 | SHEAVE | 1 | |
| A71001-27 | TOOL | 1 | |
| ACR-100-12-8 | ENCODER MOUNTING KIT | 1 | |
| ACSM100-.125 | MANUALCOUNTER SINK PROBE 100° DEGREES 50-500KHz WITH MICRODOT CONNECTOR 1/8"Ø OD . Includes Test Report and Certificate of Conformance. | 1 | |
| ACSM100-.125/200K-1M | Hand Operated countersink Manual 100° Countersink Probe, .125"Ø (1/8") Pilot, FREQUENCY RANGE: 200KHz-1MHz, Supplied With a Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.120 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .120"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.125 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHZ-2MHZ 4-PIN FISCHER CONNECTOR. .125"Ø INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AM-1001-209/217 | SLING, JT8D HANDLING | 1 | |
| ARRCS100-.125 | RECHII 100° COUNTERSINK ROTARY PROBE 100KHz-2MHz, 0.125" OD, 3.0" OVERALL LENGTH, 4 PIN STEP LEMO. Includes Test Report and Certificate of Conformance. | 1 | |
| AT100-12H | RETAINING RING | 1 | |
| AT1100-12 | O-RING | 1 | |
| ATCSM100-.125 | MANUAL COUNTER SINK PROBE 100° DEGREES 50-500KHz WITH TRIAX FISCHER CONNECTOR .125"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.125 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .125"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.125SS | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .125"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-12.5M/50M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .492"(12.5mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-12.5MSS/50MWL | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .492"(12.5mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-12.6M/50M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .496"(12.6mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURX-1.00-1.250 | ADJUSTABLE ROTARY X-PROBE, 100KHz-2MHz, SPILT END, .1.000"-1.250"OD, 2.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB-10.0-12.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .394"(10.0mm)-.492"(12.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURYFB30-10.0-12.5M/50MWL | UNIVERSAL ADJUSTABLE FLAT BOTTOM ROTARY Y-PROBE, (COIL ANGLE 30° DEGREES .039"DIA), 100KHz-2MHz, SPILT END, .394"(10.0mm)-.492"(12.5mm)OD, 50mm WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B100-122 | EXHAUST PLUGS (set of 4) | 1 | |
| B100-123 | EXHAUST PLUGS (Garret Engines) (set of 2) | 1 | |
| B100-125 | ENGINE COVERS (set of 2) | 1 | |
| B100-127 | INSULATED ENGINE COVERS (set of 2) | 1 | |
| B21001-2 | RELIEF VALVE CLAMP TOOL | 1 | |
| B26942100-123 | END GATE ASSY | 1 | |
| B26942100-124 | END GATE ASSY | 1 | |
| B26942100-127 | FWD BUTT ASSY | 1 | |
| B26942100-129 | AFT BUTT ASSY | 1 | |
| B71001-20 | OUTBD BRACE ASSY | 1 | |
| B71001-206 | BRACE ASSY | 1 | |
| B71001-207 | BRACE ASSY | 1 | |
| B71001-21 | INBD BRACE ASSY | 1 | |
| B71001-211 | JAW | 1 | |
| B71001-212 | TAB | 1 | |
| B71001-214 | TAB | 1 | |
| B71001-214-CM | 0375" THK 4130 | 1 | |
| B71001-220 | ARM ASSY | 1 | |
| B71001-23 | ARM | 1 | |
| B71001-25 | ARM | 1 | |
| B71001-260 | ARM ASSY | 1 | |
| B71001-27 | RIG EQUIPMNT | 1 | |
| B71001-271 | Strut throgh-rod | 2 | |
| B71001-272 | BELL CRANK ASSY | 1 | |
| B71001-273 | BELL CRANK ASSY | 1 | |
| B71001-274 | PLATE | 1 | |
| B71001-274-CM | 075" THK 4130 | 1 | |
| B71001-281 | Boeing | 1 | |
| B71001-282 | Boeing | 1 | |
| B71001-283 | Boeing | 1 | |
| B71001-287 | INSTRUCTION PLACARD | 1 | |
| B71001-288 | PLATE | 1 | |
| B71001-288-CM | 0500THK 4340 | 1 | |
| B71001-289 | PLATE ASSY | 1 | |
| B71001-292 | PLATE | 1 | |
| B71001-292-CM | 50 THK 4340 | 1 | |
| B71001-293 | RAMP | 1 | |
| B71001-293-CM | 025" THK 4340 | 1 | |
| B71001-294 | TIE ROD ASSY | 1 | |
| B71001-295 | ROD | 1 | |
| B71001-296 | CLEVIS | 1 | |
| BAH1-1001212 | 12" HAND FILE CUT 1 C/W HANDLE | 1 | |
| BAH1-1001222 | 12" HAND FILE W/HANDLE 2ND CUT | 1 | |
| BK3100-12 | USB CABLE | 1 | |
| C10012-1 | PROTECTIVE EQUIPMENT, CFM56-7 ENGINE | 1 | |
| C10012-2 | PROTECTIVE EQUIPMENT, CFM56-7 ENGINE | 1 | |
| C10012-3 | PROTECTIVE EQUIPMENT, CFM56-7 ENGINE | 1 | |
| C21001-24 | REVERSE FLUSHER (HEAT EXCHANGER) | 1 | |
| C51001-2 | JACK EQUIPMENT - ENGINE SUPPORT | 1 | |
| COD 5001001213 | THIS IS NOT A TOOL | Not Available | Not Available |
| CS-710-231 (610012) | FAN INSTALLATION AND REMOVAL TOOL | 1 | |
| CSD100-12 | PROBE - 5, | 1 | |
| CSM-100-12 | EDDY CURRENT PROBE | 1 | |
| CSM-100-12(0,187INCHDIAMETER) | EDDY CURRENT PROBE | 1 | |
| CSM100-12-3/16 | PROBE LFEC | 1 | |
| CSU100-12 | Eddy current probe, bolt hole | 1 | |
| CSU100-12-2.5WL | BOLT HOLE C SINK | 1 | |
| CSU100-12-4.0WL | UNIVERSAL ROTARY 100 DEGREE COUNTERSINK HOLE PROBE WITH PLASTIC HOUSING. 0.187 INCH (4.76MM) DIAMETER PILOT | 1 | |
| D5211001220000 | BOLT | 7 | |
| DAH601100-12PM | DAH 601100/12 STAKING TOOL | 1 | |
| DAH601100/12 | Stacking Tool | 1 | |
| EBRT100-12 | TOOL - REMOVAL, - EDDIE BOLT COLLAR | 1 | |
| EEBC100-12 | TRANSFORMER | 1 | |
| FH100-12 | 3/8DR F100 SG RPLCMT RED | 1 | |
| FH100-12DT | 3/8DR F100 SG RPLCMT DRK TTN | 1 | |
| FH100-12G | 3/8DR F100 SG RPLCMT GRN | 1 | |
| FH100-12HV | 3/8DR F100 SG RPLCMT HIVIZ | 1 | |
| FH100-12MB | 3/8DR F100 SG RPLCMT PWRBL | 1 | |
| FH100-12O | 3/8DR F100 SG RPLCMT ORG | 1 | |
| FHD100-12 | 3/8DR F100 HG RPLCMT RED | 1 | |
| FHD100-12DT | 3/8DR F100 HG RPLCMT DRKTTN | 1 | |
| FHD100-12G | 3/8DR F100 HG RPLCMT GRN | 1 | |
| FHD100-12HV | 3/8DR F100 HG RPLCMT HIVIZ | 1 | |
| FHD100-12MB | 3/8DR F100 HG RPLCMT PWRBL | 1 | |
| FHD100-12O | 3/8DR F100 HG RPLCMT ORG | 1 | |
| FTP324001-001-216 | TOOL - FORCE APPLICATION | 1 | |
| FTP324001-001-216B | RUDDER PEDAL FORCE TOOL | 3 | |
| G1001200001-001 | Lavatory Servicing Adapter | 1 | |
| G51001-20 | THUMB SCREW | 1 | |
| G51001-21 | TOOL | 1 | |
| G51001-21-MYLAR | SET OF MYLAR INDEX STRIPS | 1 | |
| G51001-22 | MEASUREMENT ASSY | 1 | |
| G51001-25 | 1 | ||
| G51001-26 | 1 | ||
| G51001-27 | BEAM | 1 | |
| G700-351001-29 | TEST KIT - CREW OXYGEN SYSTEM | 2 | |
| G71001-2 | FWD support assy | 1 | |
| G71001-21-CM | 025THK 4130 | 1 | |
| G71001-22-CM | 025THK 4130 | 1 | |
| G71001-23-CM | 01875THK 4130 | 1 | |
| G71001-24-CM | 03125THK 4130 | 1 | |
| G71001-25-CM | 03125THK 4130 | 1 | |
| G71001-26-CM | 03125THK 4130 | 1 | |
| G71001-27-CM | 025THK 4130 | 1 | |
| G71001-28 | Pin | 1 | |
| G71001-29-CM | 03125THK 4130 | 1 | |
| GSB1210012 | KIT-OXYGEN CHARGING ADAPTER | 2 | |
| GSB5500001-001-213 | HORIZONTAL STABILIZER LIFTING TOOL | 1 | |
| GSB6110012 | WRENCH PROPELLER NUT RATCHET | 2 | |
| HE38100-12 | BEARING RACE | 1 | |
| HE89100-12 | SPLIT WHEEL RIM | 1 | |
| HRY1.0-0.125 | ADJUSTABLE SCANNER PROBE, Y TYPE FOR HOCKING MINI, 100KHZ-2MHZ | 1 | |
| HV99810012 | FOOT REMOTE CONTROL 14P 5M | 1 | |
| IAE1F10012 | PUSHER, INSTALLATION | 9 | |
| IM5100-12R | ANVIL S/A | 1 | |
| INSIDE MICROMETER 100-125 | RANGE 100-125 | 1 | |
| J10012-14 | WHEEL STOP - MAIN LANDING GEAR, MOORING, HIGH WIND | 1 | |
| J10012-18 | WHEEL STOP - MAIN LANDING GEAR, MOORING, HIGH WIND | 1 | |
| J21001-2 | FRAME | 1 | |
| J21001-20 | SHOCK CORD ASSY | 1 | |
| J21001-21 | ADAPTER ASSY | 1 | |
| J21001-21-WLDMT | WELDMENT PORTION OF -21 | 1 | |
| J21001-22 | Strap Assy | 1 | |
| J21001-29 | BLOCK ASSY | 1 | |
| J51001-2 | BARRIER - 48 SECTION, SERVICE ACCESS DOOR | 3 | |
| J71001-2 | COWL SLING | 1 | |
| J71001-20-CM | 025THK A36 | 1 | |
| J71001-23 | GUIDE PIN | 1 | |
| J71001-24 | Pin | 1 | |
| J71001-25 | Beam | 1 | |
| J71001-26 | Sheave pin | 1 | |
| J71001-26-REVA | **BOEING GSE | 1 | |
| JW910012 | SET OF 2 - TESTING - MOUNTING FINAL WF09 | 1 | |
| K10012 | TOOL | 1 | |
| K10012-1 | (ENGINE EXHAUST PLUG FOR RR ENGINES) | 1 | |
| K10012-14 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, RR TRENT 1000 | 5 | |
| K10012-15 | TOOL | 1 | |
| K10012-2 | PLUG EXHAUST ENGINE | 1 | |
| K10012-4 | Foam | 1 | |
| K71001-2 | FWD OUTBD ARM ASSY | 1 | |
| K71001-20 | Load cell system | 3 | |
| K71001-21 | TOOL | 1 | |
| K71001-22 | FWD socket | 1 | |
| K71001-23 | FWD SHORT EXTENSION | 1 | |
| K71001-24 | Torque multiplier | 1 | |
| K71001-25 | AFT socket | 1 | |
| K71001-26 | HOLD OPEN CENTER ASSY | 1 | |
| K71001-27 | FWD hold open pin | 1 | |
| K71001-28 | LH thread rod end | 1 | |
| K71001-29 | RH thread rod end | 1 | |
| LJ 737-6100-1,-2 DJ 737-6100-1,-2 | 737-900ER-7-SSW WINGLET | 1 | |
| M10-012 | CANOPY/ENGINE/EMPENNAGE COVER (ALON MODEL) | 1 | |
| MEA10012-CM | 0125THK 4130 | 1 | |
| MIT-1544100-12 | WRENCH TOOL (PART OF MIT-1544100) | 1 | |
| MTOO01-CA-78100-1201 | LLAVE DE VASO CON MUESCAS | 1 | |
| MTOO06-D23655100-1 (2UDS. + 10 FIJAS) | Llave media | 1 | |
| OHME65B90100-12 | SHEAVE | 1 | |
| P7-01-0012-101 | TU-14 TEST SET | 1 | |
| P7-01-0012-102 | TEST UNIT SUPSD BY P7-01-0024-000 | 1 | |
| P7-01-0012-103 | TEST UNIT-ESCAPE SLIDE LIGHTING SYSTEM | 1 | |
| PCL100128MM-HA-R | FLASH CARD PCMCIA 512MB | 1 | |
| PENFLX9100-12 | 90° Surface Probe, .125" Dia x 1.00" Drop x 12" long, Copper Shaft, 50-500KHz, Microdot | 1 | |
| PGF1001250 | MANOMETRE 0-250B | 1 | |
| PKR10012404 | BALSTON FILTERS 10 PACK | 1 | |
| QCT-1001.250 | Scanner Hole Probe, .250" Dia., 500KHz-3MHz, Spread End | 1 | |
| REM100-12 | HAND TOOL HI-SHEAR PIN DIA. -12 NOM PIN 3/8" | 1 | |
| REM100-12E | TOOL-REMOVAL, EDDIE BOLT | 1 | |
| RFP-13001-001-2011 | ADAPTER, TORQUE WRENCH | 1 | |
| RNF-100-1/2-2-SP | HEAT SHRINK SLEEVING (METRE) | 1 | |
| RNF-100-1/2-2-STK | GAINE HEAT SHRINK TUBING - RED | 1 | |
| RNF-100-1/2-4-STK | GAINE HEAT SHRINK TUBING - YELLOW | 1 | |
| RNF-100-1/2-6-STK | GAINE HEAT SHRINK TUBING - BLUE | 1 | |
| RNF-100-1/2-9-STK | GAINE HEAT SHRINK TUBING - WHITE | 1 | |
| RNF100-1-2BLUE | SLEEVING SHRINK | 1 | |
| RNF100-1-2WHITE | HEAT SHRINK | 1 | |
| RNF100-1/2 | BLACK HEATSHRINK | 1 | |
| RNF100-1/2RED | GAINE HEAT SHRINK TUBING - RED | 1 | |
| RNF100-1/2YELLOW | GAINE HEAT SHRINK TUBING - YELLOW | 1 | |
| RRT100129 | TOOL | 1 | |
| S2101001221300 | THIS IS NOT A TOOL | Not Available | Not Available |
| S6470-10012-016 | DIFERENTIAL CHECK VALVE TEST FIXTURE | 1 | |
| SC10012 | CASEIH 3/8 STD 6PT SKT 1/4DR | 1 | |
| SCC-100-1/2 | 100 Degree "Suicide" Countersink Cutter, 1/2" Diameter | 1 | |
| SK215T-10012 | GAGE,INSPECTION | 1 | |
| SN10012 | NH 3/8 STD 6PT SKT 1/4 DR | 1 | |
| SP510012 | HAMMER FRAME | 1 | |
| ST933-100-12 | Swaging tool shaft bearing ring lock | 1 | |
| T-100-1/2 | BENDER ST TUBE HND ACUATE 1/2" | 1 | |
| T01001247 | MD-11 OUTBD FLAP FTG WRENCH | 1 | |
| T41001280-6 | VALVE SEAL FORMING TOOL | 1 | |
| TC100122 | C' CLAMPS 2" 271A.60 / EQVT. | 1 | |
| TE21T-31001-22 | CLOSURE PLATE GROUND | 1 | |
| TE21T-31001-24 | PLATE PRESS RELIEF | 1 | |
| TE21T-31001-25 | AIR INLET PLATE | 1 | |
| TE21T-31001-27 | BLOCK-OFF PLATE | 1 | |
| TE38T-31001-2 | TOILET DRAIN MANOMET | 1 | |
| TESA-01810012 | Tesa 01810012 - Analogue lever-type dial test indicator TAST Lateral, Range - 2mm | 1 | |
| TF1001-240 | HOSE 2OFT, | 1 | |
| TF50B10012-1 | OBTUR. ENTER EXIT | 1 | |
| TMH TBC12-100-12 | BUSHING | 1 | |
| TSF22T-11001-2 | PHENOLIC RIG PIN - LATERAL CONTROL | 1 | |
| TSF38T-11001-22 | TEST SUPPORT FIXTURE, DRAIN MAST PLUG | 1 | |
| TSF38T-11001-24 | PASSENGER WATER AIR GAUGE | 1 | |
| TSF38T-11001-25 | TEST SUPPORT FIXTURE, PASSENGER WATER GAGE | 1 | |
| TSF38T-11001-28 | DRAIN HOSE ASSY - POTABLE WATER SYSTEM | 1 | |
| TSF38T-11001-29 | TEST SUPPORT FIXTURE, BREAKOUT BOX | 1 | |
| U07A100120 | LOCK,AIRCRAFT GROUN | 1 | |
| U10-0125 | ADAPTOR | 1 | |
| U8010012 | 9317797 : BROAD BAND FREQUENCY S-PC-P11 PITCH-CATCH PROBE, BROADBAND FREQUENCY, SPRING LOADED TIPS, | 1 | |
| U8100125 | OMNI2-P2-PA16:64 BASE KIT | 1 | |
| WAVEB2G10012 | EDDIE BOLT THIMBLE .41 | 1 | |
| WAVEBRT100-12 | HAND REMOVAL WRENCH | 1 | |
| WC1-1700-ONE-1001-20F | JAW MODEL | 1 | |
| WCI-1700-ONE-1001-20F | MODULAR EXTENSION NOSECAP ASSY | 2 | |
| WCI-1700NE-1001-20F | STANDARD NOSE CAP ASSEMBLY | 2 | |
| WCI-1700NE-1001-2375-FN | NOSE EXTENSION | 1 | |
| Y14-10012-003 | PULSER, LASER | 1 | |
| ZB-M81001292 | TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
