| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-320 | #20 STUBBY THREADED DRILL BIT | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 22035A8-310/320 | FAISCEAU FIXE 80VU | 1 | |
| 0044110320 | SEAL | 1 | |
| 02-1032-0100 | WING JACK | 3 | |
| 02-1032-0100-01 | OPTION: PN, | 1 | |
| 02-1032-0100-07 | OPTION: CA, | 1 | |
| 02-1032-0110 | TRIPOD JACK, 10 TON | 1 | |
| 02-1032-0110-07 | OPTION: CASTERS, | 1 | |
| 02-1032-0111 | JACK: TRIPOD,HYD,10TON, 39X39X40IN,240LB | 6 | |
| 02-1032-0111-07 | OPTION: CASTERS, | 1 | |
| 0298710320 | SEAL | 1 | |
| 02A1032-0100 | JACK, | 1 | |
| 02A1032-0100-07 | SPRING LOADED, | 1 | |
| 02A1032-0111 | Jack, Tripod 10 Ton | 1 | |
| 02A1032-0111-07 | CASTER, | 1 | |
| 02A1032-0111A1 | JACK 10 TON TRIPOD DESERT SAND, | 1 | |
| 02B1032-0100 | JACK W/AIR AND CASTERS, | 1 | |
| 02B1032-0111 | Jack, Tripod 10 Ton | 1 | |
| 02C1032-0111 | JACK: TRIPOD 10 TON W/CAST, | 1 | |
| 0319110320 | STOP | 1 | |
| 069-01032-0201 | THIS IS NOT A TOOL | Not Available | Not Available |
| 10-320--0127 | CABLE | 2 | |
| 10-320-0008 | CABLE , ACCEL , HI TEMP | 1 | |
| 10-320-0126 | CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL | 4 | |
| 10-320-0126-1 | CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL | 1 | |
| 10-320-01262 | ACES CABLE | 1 | |
| 10-320-0153 | CABLE TACH GENERIC 25' - ACES | 2 | |
| 10-320-0162 | CABLE VIBE SENSOR | 2 | |
| 10-320-0163 | CABLE, SENSOR 991D-1, 50' | 1 | |
| 10-320-0185 | CABLE, INTERF, ATR-42-TO-2020/4040 | 1 | |
| 10-320-0220 | CABLE, ADAPTER, MAGNETIC PICKUP | 1 | |
| 10-320-0227 | CABLE INTERFACE EMB120 TO 991V | 1 | |
| 10-320-0228 | CABLE INTERFACE EMB120 TO 2020/4040-991V | 1 | |
| 10-320-0249 | CABLE LATERAL SENSOR BK117 2020/4040 ACCESSORIE REQUIRED FOR EC 145 | 1 | |
| 10-320-0251 | CABLE INTERFACE BK117 CABIN ACCESSORIE REQUIRED FOR EC 145 | 1 | |
| 10-320-0294 | PROPELLER DYNAMIC BALANCE CABLE | 1 | |
| 10-320-0295 | CABLE INTERFACE, EMB120 TO 991D-1 | 1 | |
| 10-320-0296 | CABLE INTERFACE EMB120 TO ANALYZER FOR 991D-1 | 1 | |
| 10-320-0329 | CABLE | 1 | |
| 10-320-0448 | INTERFACE CABLE | 1 | |
| 10-320-0551 | CABLE, EXT, TRACKER 6FT. | 1 | |
| 10-320-0560 | MODEL 560 PWC-JEDA BOX | 1 | |
| 10-320-0814 | FAN TRIM GSE CABLE | 1 | |
| 10-320-2202 | QUICK DISCONNECT ESAFE COUPLER | 1 | |
| 10-320301-018 | TOOL | 1 | |
| 10-320301-022 | TOOL | 1 | |
| 10-32080A | TR DR SBLU BRIT 30.9 KRL1015 | 1 | |
| 103/200 | CROSS-CUT CHISELS | 1 | |
| 103201M | Field Assy | 1 | |
| 103206L | Housing Assy | 1 | |
| 11-03-2002 | REMOVAL TOOL | 1 | |
| 210-320 | HORIZONTAL STABILIZER COVERS, padded for hail protection, WINTER USE (set of 2) | 1 | |
| 298710320 | SEAL | 1 | |
| 30-3751032-00 | TOOL | 1 | |
| 365A32710320 | THIS IS NOT A TOOL | Not Available | Not Available |
| 365A93-3103-20 | SUPPORT | 1 | |
| 41032022 | 220.20.X.22-20x22 mm DBL END RING SPANNER | 1 | |
| 43103206 | 12506-2K.SW6-NEW-FLEXI. NUT SPINNER 6MM | 1 | |
| 43103207 | 12506-2K.SW7-NEW-FLEXI. NUT SPINNER 7MM | 1 | |
| 43103208 | 12506-2K.SW8-NEW-FLEXI. NUT SPINNER 8MM | 1 | |
| 47001-032-000 | TOOL | 1 | |
| 558-1-03207 | PIPE ASSEMBLY | 1 | |
| 558-1-03208 | INLET ADAPTER | 1 | |
| 70310320 | DRILL BUSH | 1 | |
| 703A94‐6103‐20 | SOCKET WRENCH LOCK,UN LOCK | 1 | |
| A310-32-058 | THIS IS NOT A TOOL | Not Available | Not Available |
| A310-32-059 | THIS IS NOT A TOOL | Not Available | Not Available |
| BOS103201202 | FEMALE QUICK RELEASE NIPPLE | 1 | |
| C02-1032-0100 | MANUAL (PART #02-1032-0100), | 1 | |
| C02-1032-0110 | MANUAL (PART #02-1032-0110), | 1 | |
| C103202202 | QUICK DISCONNECT ESAFE COUPLER | 1 | |
| CBR-10-N-1-0.320 | Split Sleeve Cold Expansion Cutting Tool | 1 | |
| EC1032-01 | CABLE: ELEC. MAKE UP CHART, | 1 | |
| EC1032-02 | CABLE, | 1 | |
| EC1032-03 | CABLE: ELEC. MAKE UP CHART, | 1 | |
| EC1032-04 | CABLE: ELEC. MAKE UP CHART, | 1 | |
| F533R5103-200-00 | TOOL | 1 | |
| F533R5103-201-00 | TOOL | 1 | |
| F533R5103-203-00 | TOOL | 1 | |
| F533R5103-204-00 | TOOL | 1 | |
| F533R5103-205-00 | TOOL | 1 | |
| FB541-600-A300/310/320/AM | FISHPOLE HOIST & LIFTING BEAMASSY | 1 | |
| FB541-600-A300/310/320/M | F/P HOIST & LIFT BEAM ASSY -MAN DRV ONLY | 1 | |
| G103-200 | WING COVERS, 17.5 meter wingspan, all year use (set of 2) | 1 | |
| G1110-3-20A | BOLT, | 1 | |
| Gedore-010320 | Gedore 010320 BDS80E - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| GS10320 | GASKET SHIPPING | 1 | |
| HT621-03200 | VA2.5/5 PRONG 18 EXTENDED ARMS | 1 | |
| HTET10320 | SPANNER | 1 | |
| IAE1F10320 | Stud Support, Long (set of 3) | 1 | |
| PRR1032-035 | ROTATIONAL PROBES | 1 | |
| RB 92700-10320-041 | Support bracket puller assembly | 2 | |
| RB T103202-101 | C/S Nut Wrench | 1 | |
| RB T103203-101 | Tool Set Drive Shaft | 1 | |
| RB T103204-101 | Turnbuckle Assembly | 1 | |
| RB T103205-101 | Turnbuckle Assembly | 1 | |
| RB T103206-101 | Tail Rotor Rigging Tool | 2 | |
| RB T103208-101 | Backlash Tool Set | 1 | |
| SAM0103200 | GREASE GUN | 1 | |
| SP510320 | WASHER | 1 | |
| T10320 | Spanner | 1 | |
| T103202-101 | C/S Nut Wrench | 1 | |
| T103203-101 | Tool Set Drive Shaft | 1 | |
| T103204-101 | Turnbuckle Assembly | 1 | |
| T103205-101 | Turnbuckle Assembly | 1 | |
| T103206 | RIGGING TOOL TAIL ROTOR CONTROL | 1 | |
| T103206-101 | T/R RIGGING TOOL | 1 | |
| T103208-101 | Backlash Tool Set | 1 | |
| TE519-129-103-2000 | TESTSOFTWARE DATABASE (TE519-129- 103-2000) | 1 | |
| TF1041-10-32-0 | HOSE ASSY, | 1 | |
| VFI10320 | 787 SI-CARGDR FOAM BLUE/YELLOW | 1 | |
| WS1032002400 | PIEZO IGNITOR | 1 | |
| WS7310320000 | CAPACITOR (DD9/24) | 1 | |
| Z1032-02 | WELDMENT: SUPPORT HANDLE, | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
