| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1002-8 | .401 Shank Rivet Set - Straight - Size: 1/8", Length: 7-1/2" | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| 00510-028-000 | ANGLED ELBOW COUPLIN | 1 | ||
| 01410028 | Socket 1/4" 7/16" L.23mm | 1 | ||
| 02410028 | Socket 3/8" 7/16" L.28mm | 2 | ||
| 03010028 | Socket 1/2" 28mm L.45mm | 1 | ||
| 03410028 | Socket 1/2" 7/16" L.38mm | 1 | ||
| 0421100280 | SPACER | 1 | ||
| 05-7025-1100-28 | OPTION: RESERVOIR LEVEL, | 1 | ||
| 05-7052-1100-28 | OPTION: RESERVOIR LEVEL, | 1 | ||
| 10-02875C | TR PL SLVR BRIT 37.624 KEBN | 1 | ||
| 10028141 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 100282 | CORD: AC POWER CORD - TYPE G (UK, IRELAN, | 1 | ||
| 1002832-1 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1002853 | HONEYWELL 1002853 HARNESS | 1 | ||
| 1002853SAFTEYHARNESS | MILLER SAFETY HARNESS MED/LARGE | 1 | ||
| 1002854 | MILLER SAFETY HARNESS SMALL | 1 | ||
| 1002894 | ULTIMA-DT TEST SET (INCLUDES CABLES, ACTIVE GNSS A | 1 | ||
| 1002896-1 | SPRING | 4 | ||
| 10028B | NEEDLE BEARING | 1 | ||
| 10028FC | FULL COMPLEMENT NEEDLE BEARING | 1 | ||
| 1410028 | 1/4DR x 7/16" HEX SOCKET | 1 | ||
| 15931-0028 | RETAINING RING | 1 | ||
| 1AE1F10028 | PEDESTAL, FIXED | 1 | ||
| 1AE1F10028 REV B | PEDESTAL, FIXED | 1 | ||
| 1AE1F10028MODFB | V2500 FIXED PEDESTAL | 1 | ||
| 1AEF10028 | 1AEF10028 NOLU TAKIM / PEDASTAL | 1 | ||
| 1F10028 | PEDESTAL | 1 | ||
| 22410028 | Socket 3/8" 7/16" L.28mm | 1 | ||
| 2410-028 | MAGNETIC CIRCUIT | 1 | ||
| 2471002-8 | TOOL ELEVATOR RIG FI | 1 | ||
| 25010028 | IMPACT socket 3/4" 28mm | 1 | ||
| 27-810028-000 | Special Tool Fairchild | 1 | ||
| 2821-0028 | BOLT | 1 | ||
| 2RIT314C2100-28 | RIVETING TOOL | 1 | ||
| 3010028 | 1/2DR x 28mm SOCKET BI-HEX | 1 | ||
| 310028 | MDH3202-A Right Angle Electric Driver (1/4 F/Hex) | 1 | ||
| 332A95‐2100‐28 | SPACER | 1 | ||
| 3410028 | 1/2DR x 7/16" SOCKET BI-HEX | 1 | ||
| 41F11210028215 | STENCIL STENCIL | 1 | ||
| 41F11210028216 | STENCIL STENCIL | 1 | ||
| 5937-10028 | EXPANDER | 1 | ||
| 5945-10028 | EXPANDER | 1 | ||
| 6150-10028 | BUSHING | 1 | ||
| 63100/28-4 | MANOMETRO ANALOGICO | 1 | ||
| 70410-02820-054 | SERVO ASSY | 1 | ||
| 704A38710028 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 74610028 | Cable extractor tool | 1 | ||
| 9794710028 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98000F12001031002 (8m) | Cherry picker 12m | 1 | ||
| 9879010028 | AXIAL SLOTTED NUT | 1 | ||
| A-10028 | 714-103 2DRAW 24X1.5X3" | 1 | ||
| A51002-8 | BAR | 1 | ||
| A51002-8-CM | 5 THK 6061-T6 | 1 | ||
| ACSM100-.281 | MANUALCOUNTER SINK PROBE 100° DEGREES 50-500KHz WITH MICRODOT CONNECTOR 9/32" OD . Includes Test Report and Certificate of Conformance. | 1 | ||
| ARRCS100-.281 | RECHII 100° COUNTERSINK ROTARY PROBE 100KHz-2MHz, 0.281" OD, 3.0" OVERALL LENGTH, 4 PIN STEP LEMO. Includes Test Report and Certificate of Conformance. | 1 | ||
| AT100-28 | WASHER | 1 | ||
| AT1100-28MP2 | LOCK SPRING 2 PK | 1 | ||
| AURCS100-.281 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .281"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| AURCS100-.281SS | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .281"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| AURCS100-.281SS/1.5WL | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .281"OD TIP, 1.5" WORKING LENGTH, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| C21002-8 | REINFORCING RING FOR EQUIP FLUSH HEAT EXCHANGER | 1 | ||
| C71002-8 | TOOL | 1 | ||
| C71002-81 | THRUST REVERSER AND COWLING HANDLING EQUIPMENT | 4 | ||
| C71002-81-91 | THRUST REVERSER & | 1 | ||
| C71002-83 | TUBE ASSEMBLY | 1 | ||
| C71002-84 | TOOL | 1 | ||
| CF314U2100-28 | CHECKING FIXTURE | 1 | ||
| CH1541-0028 | Washer -Thrust | 1 | ||
| DST100-28 | VISE JAW ADAPTER | 1 | ||
| DST100-28B | VISE JAW ADAPTER | 1 | ||
| E1002821 | THRUST REVERSER SEAL TOOL | 1 | ||
| EEBC100-28 | EEBC100 JUMPER | 1 | ||
| F532-70310-028W8000-01 | CARGO DUMMY FLOOR GRID FWD | 1 | ||
| F532-70310-028W8000-02 | ROLLERTRACK BRIDGE LOWER CARGO FLOOR | 1 | ||
| F532-R1110-028W80000-01 | MAIN DECK DUMMY FLOOR GRID | 1 | ||
| F536-70010-028W8000-01 | CARGO DUMMY FLOOR GRID AFT | 1 | ||
| FIL8100-28-342 | Steering arm fab | 1 | ||
| G1002813022-001 | KIT, FUEL TANK VENTING | 2 | ||
| G3-GS-2P100-288T-MW | G3-GS-2P100-288T-MW;Annual Service Contract - GigaStor - 288T - 100Gb - 2 Ports | 1 | ||
| HAYSA1L10028 | BURR CYLINDRICAL 1/4" x 1" | 1 | ||
| IAE1F10028 | REAR PEDESTAL, FIXED ENGINE HANDLING V2500 | 11 | View Images / Tech Appraisal | |
| IAE1F10028-3 | Pin-quick release | 1 | ||
| IAE1F10028R01 | TOOL | 1 | ||
| IAE1F10028R02 | TOOL | 1 | ||
| IAE1F10028R03 | TOOL | 1 | ||
| J51002-8 | TOOL | 1 | ||
| J71002-80 | 1 1/16 socket | 1 | ||
| J71002-81 | SQUARE DRIVE ADAPTER STORAGE BOX | 1 | ||
| J71002-82 | CABLE ASSY | 1 | ||
| J71002-83 | OUTER SHEAVE ASSY | 1 | ||
| J71002-84 | TOOL | 1 | ||
| J71002-87 | Clamp | 1 | ||
| J71002-88 | Support | 1 | ||
| J71002-89 | AFT CRADLE ATTACH FTG | 1 | ||
| K10028246 | ADAPTOR OLYMPUS ADAPTOR | 1 | ||
| K71002-8 | TOOL | 1 | ||
| K71002-80 | ROD END (LH) | 1 | ||
| K71002-81 | PIN | 1 | ||
| K71002-82 | TOOL | 1 | ||
| K71002-84 | ARM | 1 | ||
| K71002-85 | TOOL | 1 | ||
| K71002-88 | BEAM | 1 | ||
| K71002-89 | TOURQUE MULTIPLIER | 1 | ||
| RIT314J2100-28 | RIVETING TOOL -0 NOZZLE | 1 | ||
| SMSR100-28V | 100 AMP, | 2 | ||
| SP510028 | REAR BEARING PLATE | 1 | ||
| ST878D-10-028 | SPLIT CLAMP DIE | 1 | ||
| T-10028 | STANDARD GAS DIFUSER | 1 | ||
| T-10028A | HEAVY DUTY GAS DIFUSER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
