| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1002-1 | .401 Shank Rivet Set - Straight - Size: 3/32", Length: 3-1/2" | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 101-00212 | PRESION DE COMB. (PRESSURE TESTER (CALIBRATION) | 1 | |
| (CALIB) K71002-141 | Engine Change Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71002-148 | ENGINE CHANGE KIT - ROLLS-ROYCE (CALIBRATION) | 1 | |
| (CALIB) S622V1002102 | ELINGUE MRP-BTP MRH-MGB SLING (CALIBRATION) | 1 | |
| 010-021-20-004 | TELEDYNE DUAL MODE CHARGER(TMDC) | 1 | |
| 02-100-210-0960 | Undercut Body Countersink Cutters (Shank size: .210") (Pilot diameter: .0960") (Add to cart: Add To Cart) | 1 | |
| 02-4375-100-2188 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02-5000-100-2188 | Straight Shank Integral Pilot Extension Countersinks (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 3/32") (Add to cart: Contact us to order) (Decimal equivalent: 100°) (Body diameter: 3/16") (Pilot diameter: 1/8") (Add to cart: Contac | 1 | |
| 02010021 | 45.21-3/8DR x 21mm SOCKET BI-HEX | 1 | |
| 021-002-160 | T-SCOPE III ULTRASONIC TESTER | 1 | |
| 02110021 | 456.21-3/8DR x 21mm HEX SOCKET | 1 | |
| 0292100210 | REAR PLATE | 1 | |
| 03010021 | 50.21-1/2DR x 21mm SOCKET BI-HEX | 1 | |
| 05-7022-1100-21 | OPTION: 50, | 1 | |
| 05-7023-1100-21 | OPTION: 50, | 1 | |
| 05-7024-1100-21 | OPTION: 50, | 1 | |
| 05-7025-1100-21 | OPTION: 50, | 1 | |
| 05-7052-1100-21 | OPTION: 50 FT HOSE, | 1 | |
| 05010021 | 55.21-3/4DR 21mm HEX SOCKET | 1 | |
| 060-021-00210 | 2.1MM HSS-CO (5% COBALT) DRILL BIT | 1 | |
| 07100-21250 | BALL END W HEAD SCREW | 1 | |
| 10-0210-02 | SET, UXVALIDATOR SERIES 2 | 1 | |
| 10-02175B | TR CS BLCK BRIT 25.75 EPIQ | 1 | |
| 10-02197A | 30IN DWT TRM LATCH LVR SBLU | 1 | |
| 10-10021 | Bowers Granite Table 1800x900x200mm Grade 0 | 1 | |
| 100-212-2397 | PACKING | 1 | |
| 1000-100-21 | TOOL | 1 | |
| 1002-1-BAC | 3/32" "BAC" Style Modified Rivet Set - 3-1/2" Straight | 1 | |
| 1002-10 | .401 Shank Rivet Set - Straight - Size: 1/8", Length: 13-1/2" | 1 | |
| 1002-11 | .401 Shank Rivet Set - Straight - Size: 5/32", Length: 3-1/2" | 1 | |
| 1002-11-BAC | 5/32" "BAC" Style Modified Rivet Set - 3-1/2" Straight | 1 | |
| 1002-12 | .401 Shank Rivet Set - Straight - Size: 5/32", Length: 5-1/2" | 1 | |
| 1002-13 | .401 Shank Rivet Set - Straight - Size: 5/32", Length: 7-1/2" | 1 | |
| 1002-14 | .401 Shank Rivet Set - Straight - Size: 5/32", Length: 10-1/2" | 1 | |
| 1002-15 | .401 Shank Rivet Set - Straight - Size: 5/32", Length: 13-1/2" | 1 | |
| 1002-16 | .401 Shank Rivet Set - Straight - Size: 3/16", Length: 3-1/2" | 1 | |
| 1002-16-BAC | 3/16" "BAC" Style Modified Rivet Set - 3-1/2" Straight | 1 | |
| 1002-17 | .401 Shank Rivet Set - Straight - Size: 3/16", Length: 5-1/2" | 1 | |
| 1002-18 | .401 Shank Rivet Set - Straight - Size: 3/16", Length: 7-1/2" | 1 | |
| 1002-19 | .401 Shank Rivet Set - Straight - Size: 3/16", Length: 10-1/2" | 1 | |
| 1002.1100635134 | 1002.11 | 1 | |
| 101-00211 | PRESSURE TESTER | 1 | |
| 101-00212 | Barfield Instruments Pressure Tester 8.3 in L 9.3 in W 6.6 in H 32 to 104 deg F 1/8 in 101-00212 | 9 | |
| 101-00213 | DEAD WEIGHT TESTER | 1 | |
| 1038-100-21 | TOOL | 1 | |
| 11H-100-212-57-00-0000-000 | WING CRATLE | 1 | |
| 189A1002-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| 1901002-1 | INDENTER; SOLISTRAND | 1 | |
| 1F10021 | G/Box Storage Stand | 1 | |
| 2010021 | 3/8DR x 21mm SOCKET BI-HEX | 1 | |
| 206-215-001-101/002-101 | B206B/L Trim Tab Tool Set | 1 | |
| 2100210 | AIR GAUGE RING | 1 | |
| 2100211 | END PLAY FIXTURE | 2 | |
| 2100218-2 | FAULT INDICATING MODULE | 1 | |
| 2110021 | 3/8DR x 21mm HEX SOCKET | 1 | |
| 21110021 | I PROBE MINI EXTENDE | 1 | |
| 212-92010-02.1 | Main Landing gear special wrench | 1 | |
| 23010021 | 50.IMP.21-1/2DR x 21mm HEX IMPACT SOCKET | 1 | |
| 2471002-10 | CONTOUR PLATE | 1 | |
| 25010021 | 55.IMP.21-3/4DR x 21mm HEX IMPACT SOCKET | 1 | |
| 2509100213 | STANDARD TOOLS FEELER GAGE | 1 | |
| 3010021 | 1/2DR X 21MM SOCKET BI-HEX | 1 | |
| 310021 | MDP3216-A/D Pistol Grip Electric Driver (1/4 F/Hex) | 1 | |
| 3510-0212 | SAFETY CABLE KIT | 1 | |
| 4100210-003-VISW | SOFTWARE, DOWN-LOAD - VACUUM WASTE SYSTEM | 1 | |
| 412-010-100-217 | THIS IS NOT A TOOL | Not Available | Not Available |
| 429-201-002-10 | SWASHPLATE RIGGING TOOL | 1 | |
| 429-201-002-101 | SWASHPLATE RIGGING TOOL | 1 | |
| 4B24C1002-1 | OVERFLOW DRAIN HOSE, IDG (IDG SERVICING) | 1 | |
| 5010021 | 3/4DR 21mm HEX SOCKET | 1 | |
| 62100-2100 | Removal Tool for Impact™ Mezzanine 85 Ohm Vertical Header | 1 | |
| 62100-2150 | Removal Tool for Impact™ Mezzanine 85 Ohm Vertical Header Front Housing | 1 | |
| 62100-2170 | Removal Tool for Impact™ Mezzanine 100 Ohm Vertical Header | 1 | |
| 62100-2180 | Removal Tool for Impact™ Mezzanine 85 Ohm Vertical Wafer | 1 | |
| 7-362110021 | SLING SET- SLING ASSY,MAST MAIN ROTOR ASSY | 1 | |
| 7-367310021-35 | SUPPORT ASSY | 1 | |
| 7-367310021-37 | SUPPORT ASSY, | 1 | |
| 7298410021 | SECTOR REPAIR DIMENSION | 1 | |
| 79000D92001010021 | HYDRAULIK KABEL | 1 | |
| 85517021-002-138 | TOOL-RIGHT ELEVATOR RIGGING (DRAWING AND MYLAR TEMPLATE) | 4 | |
| 901002-1 | DISC-GYRO | 1 | |
| 91002-1 | TE Connectivity 91002-1 Universal Mate-N-Lok Connectors Tool | 6 | |
| 9100210 | SHORT SOCKET 3/8 X 11/16 | 1 | |
| 9100211 | SHORT SOCKET 3 / 8X3 / 4 | 1 | |
| 9100212 | SHORT SOCKET EST. 3/8 "X 13/16" | 1 | |
| 9100213 | SHORT SOCKET EST. 3/8 "X 7/8" | 1 | |
| 98A27301002105 | CFE CLAMP | 1 | |
| 98L10001002100 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | |
| 98L10001002101 | OBTURATEUR SONDE STATIQUE BLANK STATIC PROBE | 1 | |
| 98L32101002100 | P/D AXE SUP CF BLG R/I BLG D/STAY | 1 | |
| 98L32101002102 | P/D AXE SUP CF BLG R/I BLG D/STAY | 1 | |
| 98L32101002104 | STORAGE BOX | 1 | |
| 98L34001002100 | STORAGE CASE | 1 | |
| A21002-1 | REMOVAL/INSTALLATION EQUIPMENT - AVIONICS COOLING REFRIGERATION UNIT | 1 | |
| A51002-1 | Alignment Equipment - Airplane Structural Repair | 5 | |
| A71002-1 | SLING | 1 | |
| A71002-10 | WEB | 1 | |
| A71002-10-CM | 025THK A36 | 1 | |
| A71002-15 | WIRE ROPE | 1 | |
| A810-021 | Stud | 1 | |
| AC-TB-1002-1 | TEST BOX | 1 | |
| AC-TB-1002-1-1 | DC BANANA PLUG JUMPER | 1 | |
| ACSM100-.218 | EDDY CURRENT PROBE | 1 | |
| ACSMF100-.218/1M | MANUAL COUNTER SINK PROBE 100° DEGREES 200KHz - 1MHz WITH A CENTER FREQUENCY OF 500KHz, SHIELDED, WITH MICRODOT CONNECTOR .187"Ø DIAMETER. Includes Test Report and Certificate of Conformance. | 1 | |
| ACSU100-.218 | UNIVERSAL ROTATING SCANNER PROBE 100° DEGREES COUNTERSINK 100KHz-2MHz 4-PIN FISCHER CONNECTOR. .218"Ø Includes Test Report and Certificate of Conformance. | 1 | |
| AGE10021 | ASSEMBLY TOOL | 2 | |
| ARRCS100-.218 | RECHII 100° COUNTERSINK ROTARY PROBE 100KHz-2MHz, 0.218" OD, 3.0" OVERALL LENGTH, 4 PIN STEP LEMO. Includes Test Report and Certificate of Conformance. | 1 | |
| ARRCS100-.218SS | RECHII 100° COUNTERSINK STAINLESS STEEL ROTARY PROBE 100KHz-2MHz, 0.218" OD, 3.0" OVERALL LENGTH, 4 PIN STEP LEMO. Includes Test Report and Certificate of Conformance. | 1 | |
| AS1002-1 | SYMMETRY | 1 | |
| AS3510-0218K | THIS IS NOT A TOOL | Not Available | Not Available |
| AT100-21H | COLLAR | 1 | |
| AT1100-21 | BUSHING | 1 | |
| ATE2091-002-1 | TOOL-INSTALLATION | 1 | |
| AURCS100-.218 | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .218"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.218/70MMWL | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .218"OD TIP, 70mm WORKING LENGTH 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.218SS | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .218"OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURCS100-.218SS/1.5WL | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .218"OD TIP, 1.5" WORKING LENGTH, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B100-210 | WING/ENGINE/CENTER SECTION COVERS, ALL YEAR USE (set of 2) | 1 | |
| B100-215 | OUTBOARD WING & CENTER SECTION WING COVERS, WINTER USE (set of 2) | 1 | |
| B21002-1 | Boeing | 1 | |
| B861-08010021 | VOLTMETER 0-300V 400HZ 72MM | 1 | |
| C21002-1 | Boeing | 1 | |
| C21002-14 | HOOK ASSY FOR EQUIP FLUSH HEAT EXCHANGER | 1 | |
| C21002-17 | SIPHON TUBE | 1 | |
| C21002-18 | TUBE HEAT EXCHANGER | 1 | |
| C26942100-219 | TOOLING TOWER LOCATION PLATE | 1 | |
| C71002-1 | Sling THR and Cowling | 1 | |
| C71002-191 | HANDLING EQUIPT. - THRUST | 1 | |
| D10021K3D1E01B0 | Hydro Main Jack - Widebody | 1 | |
| EEBC100-21 | NEG CABLE WITH CLAMP | 1 | |
| EXSH670−31002−1 | Calibration reference standard STGR1L and STGR20L butt joints contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| FS-1002-16FP | Nipple | 1 | |
| FTI-737-47-1002-1 | FTI KIT | 1 | |
| G1002130001-001 | HOSE, IASC PRESSURE CONTROL TEST | 5 | |
| G1002131020-001 | PRESSURIZATION TEST SAFETY NET | 1 | |
| G1002131023-001 | PRESSURIZATION TEST PANEL | 1 | |
| G1002131023-023 | PANEL, TEST, PRESSURIZATION | 6 | |
| G21002-1 | TEST EQUIPMNT | 1 | |
| G21002-17 | TOOL | 1 | |
| G51002-1 | Fall Protection - Overhead Personnel Support | 3 | |
| G601R271002-1 | SPACER ASSEMBLY - AILERON TENSION REGULATOR | 6 | |
| G601R381002−13 | Blanking Plug − Drain Mast | 2 | |
| G601R551002−1 | Set − Gauge Pin | 2 | |
| G670−271002−101 | Rig−Pin Quadrant (taper pin) | 1 | |
| G670282100-21 | KIT - FUEL LINE SHROUDS LEAK TEST | 2 | |
| G700-081002-1 | KIT-MLG CENTER LINE INDICATING | 2 | |
| G71002-1 | HOLD OPEN EQUPT. CF6-80C2 | 1 | |
| IAE1F10021 | STAND, STORAGE | 8 | |
| IAE1F100216 | TOOL | 1 | |
| IAE1J10021 | STAND STORAGE | 1 | |
| J21002-1 | PROOF LOAD EQUIPMENT - HOIST ADAPTER EQUIPMENT, A/C PACK | 6 | |
| J51002-1 | PLATFORM - SERVICE F | 1 | |
| J71002-1 | Equipment Torque - GE90 Engine Mount Bolts | 1 | |
| J71002-112 | LH FWD UPR ATTACH FTG | 1 | |
| J71002-113 | RH FWD UPR ATTACH FTG | 1 | |
| J71002-12 | SPACER | 1 | |
| J71002-121 | CCABLE JOIN ASSY | 1 | |
| J71002-126 | FWD OUTBD CRADLE ATTACH ASSY | 1 | |
| J71002-137 | FWD INBD CRADLE ATTACH ASSY | 1 | |
| J71002-149 | AFT CENTER BEAM ASSY | 1 | |
| J71002-150 | BEAM ASSY | 1 | |
| J71002-153 | BOOTSTRAP EQPT | 1 | |
| J71002-154 | FWD ARM ASSY | 1 | |
| J71002-155 | FWD CTR PLATE ASSY 1 | 1 | |
| J71002-156 | FWD CTR PLATE ASSY 2 | 1 | |
| J71002-19 | REACTION BAR ASSY | 1 | |
| JMS1002-1 | THIS IS NOT A TOOL | Not Available | Not Available |
| K21002-1 | R&I Equipment | 1 | |
| K21002-1 (K21002-62) | REFRIG | 1 | |
| K51002-1 | PLATFORM - SERVICE, FORWARD APU FIREWALL | 5 | |
| K71002-1 | KIT BOOTSTRAP ENGINE | 1 | |
| K71002-100 | BEAM | 1 | |
| K71002-102 | TOOL | 1 | |
| K71002-108 | Pin | 1 | |
| K71002-109 | ENGINE BOOTSTRAP -0 RR | 1 | |
| K71002-110 | FWD tr hold open assy | 1 | |
| K71002-111 | ROD END | 1 | |
| K71002-112 | ROD END | 1 | |
| K71002-113 | Pin | 1 | |
| K71002-114 | FWD hold open strut assy | 1 | |
| K71002-116 | ENGINE CHANGE KIT - ROLLS-ROYCE (CE) | 2 | |
| K71002-117 | FRONT BEAM ASSY | 1 | |
| K71002-118 | LEFT HAND ROD ASSY | 1 | |
| K71002-119 | RIGHT HAND ROD ASSY | 1 | |
| K71002-120 | Rod fitting assy | 1 | |
| K71002-121 | TORQUE MULTIPLIER SUPPORT ARM ASSY | 1 | |
| K71002-122 | Torque multiplier outboard arm assy | 2 | |
| K71002-124 | Pin | 1 | |
| K71002-130 | Pin | 2 | |
| K71002-133 | Pin | 1 | |
| K71002-134 | Lock pin | 1 | |
| K71002-141 | ENGINE CHANGE KIT - ROLLS-ROYCE (CE) | 3 | |
| K71002-141 AIR POWERED HOIST | Engine Change Kit - RR | 1 | |
| K71002-142 | Load cell system calibration kit | 1 | |
| K71002-147 | ENGINE CHANGE KIT - ROLLS-ROYCE | 5 | |
| K71002-147_CE | T1000 bootstrap kit | 1 | |
| K71002-148 | ENGINE CHANGE KIT - ROLLS-ROYCE | 7 | |
| K71002-149 | FWD Center Beam Assy | 1 | |
| K71002-150 | FWD Attach Fitting Assy | 1 | |
| K71002-151 | Storage box assy | 1 | |
| K71002-16 | Torque multiplier inboard arm assy | 1 | |
| K71002-17 | TORQUE MULTIPLIER INBOARD BEAM ASSY | 1 | |
| KL100-21 | LEMON 150NM ACCUTORQ | 1 | |
| L321P1002103 | LH GROUND HANDLING WHEEL | 1 | |
| L642G1002101 | SUPPORT TRH TOOL | 1 | |
| L642G1002101/PHP | SUPPORT TRH TOOL | 1 | |
| M623U1002102 | Swashplate Sling | 1 | |
| MC-10-02-11 | THIS IS NOT A TOOL | Not Available | Not Available |
| P4-01-0021 | TOOL | 13 | |
| P4-01-0021-000 | THIS IS NOT A TOOL | Not Available | Not Available |
| PC26942100-219 | TOOLING TOWER LOCATING PLATE | 1 | |
| PF51-002-1 | TOOL | 6 | |
| PTPPR10-021 | TUBE (110MM) | 1 | |
| QTFR210021 | ROLLER AXLE | 1 | |
| RB T100219 | Fixture | 1 | |
| RBEL642G-1002-101 | Retainer, Tail Rotor Head | 1 | |
| RBEM623U1002102 | Swashplate Sling | 2 | |
| RDPK1002-10 | ROD | 1 | |
| RDPK1002-12 | DIE PILOT ROD | 1 | |
| RDPK1002-14 | DIE PILOT ROD | 1 | |
| RRT100210 | ADAPTOR | 3 | |
| RRT100211 | TOOL | 1 | |
| RSE1002-1 | TOOL | 1 | |
| S3100214 | 6 KEY PAD WIRELESS TORQ WRENCH | 1 | |
| SAI11A100-21 | TVS CARD BLANK PCB | 1 | |
| SBE10021-010 | SELF BLANKING UNION | 1 | |
| SNXPR10-021 | 4.33"(110MM) TUBE | 1 | |
| SP510021 | BEARING | 1 | |
| T100219 | Fixture | 1 | |
| TF100218-0 | HOSE, | 1 | |
| TQFR100-21 | GEAR | 1 | |
| WCI-737-471002-1 | WCI KIT | 1 | |
| WWV02010021 | CANISTER 200-302C-100A | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
