| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10008 | MASTER MITE HEAT GUN | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| 010-0080 | CRIMP TOOL | 2 | ||
| 010-00813-50 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 010-00820-50 | Garmin Gtn 750 / Garmin | 1 | ||
| 01010008 | 40.8 - 1/4"DR x 8mm SOCKETS, HEXAGON | 1 | ||
| 01410008 | 40.A.1/8-1/4DR x 1/8" HEX SOCKET | 1 | ||
| 02010008 | 45.8-3/8DR x 8mm SOCKET BI-HEX | 1 | ||
| 02110008 | 456.8-3/8DR x 8mm HEX SOCKET | 1 | ||
| 03010008 | 50.8-1/2DR x 8mm SOCKET BI-HEX | 1 | ||
| 0301000850 | BRACKET | 1 | ||
| 03310008 | 1054.KK.8-1/2DRx 8mm BALL LONG INHEX SKT | 1 | ||
| 05-3005-1100-08 | OPTION: HO, | 1 | ||
| 05-3010-1100-08 | OPTION: HO, USE K5147=8G | 1 | ||
| 05-7008-1100-08 | OPTION: HO, | 1 | ||
| 05-7015-1100-08 | OPTION: HO, | 1 | ||
| 05-7023-1100-08 | OPTION: HO, | 1 | ||
| 05-7029-1100-08 | OPTION: HO, | 1 | ||
| 05-7046-1100-08 | OPTION: HO, | 1 | ||
| 05100080 | 59.TX.T.80-3/4DR x T80 INT.TORX DR SOCKET | 1 | ||
| 07-010008 | CABLE, 6', BNC TO SUHNER CONNECTOR | 2 | ||
| 07610008 | HAND RIVETER | 1 | ||
| 10-00875B | TR LU SLVR BRIT 29.695 KECN | 1 | ||
| 10-00877A | TR CX ORG VLR 37.75 EPIQ | 1 | ||
| 10-00878 | TR CS COPPER KRXL LKR | 1 | ||
| 10-00897A | 20IN DWR TRM LATCH LVR BLK | 1 | ||
| 1000827662 | TOOL | 1 | ||
| 1000827675 | TOOL | 1 | ||
| 10008298 | REGULATOR OUTLET CONNECTOR 807434 OR 9700 SERIES | 1 | ||
| 10008758 | INSPECTION GAUGE | 1 | ||
| 1000895-480 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1010008 | 1/4"DR x 8mm SOCKETS, HEXAGON | 1 | ||
| 11-01-0008 | CRIMP TOOL, MOLEX | 2 | ||
| 12010008 | 427/5W-3/8" EXTENSION 5" WOBBLE | 3 | ||
| 12010008 STAH | 427/5W (427LW) PRAILGINTOJAS STWL | 1 | ||
| 13010008 | 509/10W-1/2" EXTENSION 10" WOBBLE | 1 | ||
| 14010008 | CABLE LOOP 6DIA.X100L+50@75DEG | 1 | ||
| 1410008 | 1/4DR x 1/8" HEX SOCKET | 1 | ||
| 14100082 | STANDARD JAW PINCERS | 2 | ||
| 14100082993973 | PINCERS (FOR TEA TUBE CLAMPS) | 1 | ||
| 15-7602-1000-80 | OPTION: 208VAC 60HZ, | 1 | ||
| 15-7602-1000-82 | OPTION: 460VAC 60HZ, | 1 | ||
| 15-7602-1000-83 | OPTION: 575VAC 60HZ, | 1 | ||
| 15-7602-1000-84 | OPTION: 200VAC 3PH 50HZ, | 1 | ||
| 15-7602-1000-85 | OPTION: 220VAC 3PH 50HZ, | 1 | ||
| 15-7602-1000-86 | OPTION: 380VAC 3PH 50HZ, | 1 | ||
| 15-7602-1000-87 | OPTION 87, | 1 | ||
| 15-7602-1000-88 | OPTION: 440VAC 3PH 50HZ, | 1 | ||
| 15-7602-1000-89 | OPTION: 380VAC 60HZ, | 1 | ||
| 15-7603-1000-80 (208VAC/60Hz) | CABIN PRESSURIZATION CART (OPTIONAL) | 1 | ||
| 15-7603-1000-81 | CART, CABIN PRESSURIZATION (220VAC/60HZ) (FOR OTHER CONFIGURATIONS CONTACT TRONAIR)PRICED AFTER SELECTION. | 1 | ||
| 15-7603-1000-81 (220VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-82 | OPTION: 460VAC 60HZ, | 1 | ||
| 15-7603-1000-82 (440VAC/60HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-83 | OPTION: 575VAC 60HZ, | 1 | ||
| 15-7603-1000-83 (575VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-84 | OPTION: 200VAC 50HZ, | 1 | ||
| 15-7603-1000-84 (200VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-85 | OPTION: 220VAC 50HZ, | 1 | ||
| 15-7603-1000-85 (220VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-86 | OPTION: 380VAC 50HZ, | 1 | ||
| 15-7603-1000-86 (380VAC/50HZ) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-87 | OPTION 87, | 1 | ||
| 15-7603-1000-88 | OPTION: 440VAC 50HZ, | 1 | ||
| 15-7603-1000-88 (440VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15-7603-1000-89 | OPTION: 380VAC 60HZ, | 1 | ||
| 15-7603-1000-89 (380VAC/60Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) (OPTIONAL) | 1 | ||
| 15100082 | PINCERS | 1 | ||
| 15J7603-1000 (415VAC/50hZ) Old P/N: 15-7603-1000-87 (415VAC/50Hz) | CABIN PRESSURIZATION CART (ALTERNATE P/N) | 1 | ||
| 161U1000-89 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 162U1000-81 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 162U1000-82 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2010008 | 3/8DR x 8mm SOCKET BI-HEX | 1 | ||
| 2110008 | 3/8DR x 8mm HEX SOCKET | 1 | ||
| 23010008 | 50.IMP.8-1/2DRx8mm HEX IMPACT SKT | 1 | ||
| 3010008 | 1/2DR x 8mm SOCKET BI-HEX | 1 | ||
| 31-0008-04 | ADAPTER MOUNT KIT | 1 | ||
| 310008 | MD2611-A Electric Driver-A (1/4 F/Hex) | 1 | ||
| 3160S69-10-008 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3310008 | 1/2DRx 8mm BALL LONG INHEX SKT | 1 | ||
| 381000-801 | TOOL | 1 | ||
| 412-2410-008-101 | WRENCH | 1 | ||
| 43210008 | 10765.8-8MM HEX KEY WRENCH EX LONG NP | 1 | ||
| 44100.08 | MOISTURE SEPARATOR | 1 | ||
| 47510008 | 4751.8-No8 FINE ELECTRONIC S'DRIVER | 1 | ||
| 48010008 | 10750.1/2.8-TOMMY BARS FOR NO. 10750 30X32 | 1 | ||
| 5100080 | 3/4DR x T80 INT.TORX DR SOCKET | 1 | ||
| 5100081 | Engplug | 1 | ||
| 5410-0080 | CABLE ASSY UDE TO MCDU | 1 | ||
| 59010008 | 70.V.8-SQUARE DRIVE UNIT 3/4"-3/4" | 1 | ||
| 6001-0008- 1 | AIR COMPRESSOR | 1 | ||
| 67100-08 | COMPLETE NLG GEAR ASSY. | 1 | ||
| 6971-0008 | CARTRIDGE SHUNT | 1 | ||
| 7-010008 | CABLE, 6'''', BNC TO SUHNER CONNECTOR | 1 | ||
| 7-563100088-001 | SHOP SET, WELDING | 1 | ||
| 7-567310008-601 | TORQUE TUBE STOW KIT | 1 | ||
| 7-663100083-001 | SHOP SET, POWER TRAIN | 1 | ||
| 7-663100084-001 | SHOP SET, ROTOR | 1 | ||
| 7-663100086-001 | SHOP SET, AVIM TOOL CRIB | 1 | ||
| 70010008 | 100/8-RIBBED COLD CHISELS | 1 | ||
| 70110008 | *OBSOLETE*ENGINEERS HAMMERS | 1 | ||
| 70210008 | 10845-DOLLY | 1 | ||
| 7181-0008 | JO BOLT TOOL (1/4 - 4BA) | 1 | ||
| 75-210-0080 | FLASH DRIVE, USB 3.0, 16 GB | 1 | ||
| 811-0008 | Bush | 1 | ||
| 820710008 | ATR MAIN JACKS | 1 | ||
| 9421000800 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9610008290 | EN-COUDE EGAL NU TOURN.90 | 1 | ||
| 9752100080 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9892100080 | PLUG | 1 | ||
| 98F10008232 | TOOL | 1 | ||
| 98F10008232000 | PLUG-APU EXHAUST DUCT | 13 | ||
| 98F10008232001 | PLUG-APU EXHAUST DUCT | 1 | ||
| 98F10008232208 | TOOL | 1 | ||
| 98F10008382000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98F10008382001 | PLUG - APU EDUCTOR, INLET | 4 | ||
| 98S10008000 | TOOL | 1 | ||
| 98S10008000000 | GROUND MOORING KIT | 1 | ||
| 98S10008000000-REVA0 | GROUND MOORING KIT (CABLE VERSION) | 1 | ||
| 98S100080000000 | GROUND MOORING KIT ( | 1 | ||
| 9932100080 | SPHERICAL UNION | 1 | ||
| A210008-2 | HOIST BOOM | 1 | ||
| AIT710008 | TOOL | 1 | ||
| B10008400000 | BOLT | 1 | ||
| BAH1-1000812 | 8IN HAND W/HANDLE CUT 1 | 1 | ||
| BAH1-1000822 | 8" FLAT FILE - 2ND CUT | 1 | ||
| BAH1-1000832 | 8" FLAT FILE - SMOOTH | 1 | ||
| BN-MCXR 07-010008 | CONNECTION | 1 | ||
| C-101-0008 | TRANSDUCER CABLE SINGLE BNC TO MICRODOT | 1 | ||
| C1000-832 | Wrench Type Upsetters ( Description: For Slotted Rivnuts )( Size/diameter: #8 )( Thread: 8-32 ) | 1 | ||
| C10008 | TOOL | 1 | ||
| C10008-1 | MOORING EQUIPMENT - NOSE LANDING GEAR | 2 | ||
| C10008-29 | MOORING EQUIPMENT – NOSE LANDING GEAR | 4 | ||
| CA-02013A13A100-08 | RF CABLE – RG-214, 1 METRE, TYPE N MALE CONNECTORS | 1 | ||
| CAS-100-08F | SLEEVE | 1 | ||
| D10008 | JACK - TRIPOD, MAIN BODY/WING | 1 | ||
| D10008-002 | HYDRAULIC TRIPOD JACK | 1 | ||
| D10008K7DIE02B0 | JACK JK64 | 1 | ||
| D1010008 | PLATFORM STAIRS 2 M/ HANDDRAIL 60º 8 | 1 | ||
| D1131000820000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D1H10008 | LIFTING BEAM | 1 | ||
| D5337541000800 | TOOL | 1 | ||
| EM87100080 | ADAPTOR | 1 | ||
| EM87100081 | CAP | 1 | ||
| EM87100082 | CAP | 1 | ||
| EM87100083 | CLAMP | 1 | ||
| EMB-00010-008 | Dolly | 1 | ||
| EMB-00110-008 | Dolly and Stand Assembly | 2 | ||
| EPS1000-8 | FIBRE OPTIC TEST SET | 1 | ||
| ETE-100-087 | IGNITION PIGTAIL | 1 | ||
| F1000823200000 | TOOL | 1 | ||
| F1000884 | HOLDING FIXTURE FOR HOUSING SUBASSEMBLY | 1 | ||
| FTM-AC10-0-08 | MANDREL | 1 | ||
| G10008-1 | PLUG - OUTBOARD STRUT, AERODYNAMIC SCOOP CAVITY | 1 | ||
| G1001010008-001 | Tool | 1 | ||
| G1001010008-015 | Fuel Vent Blanking Plug | 1 | ||
| G1001010008-017 | Fuel Vent Blanking Plug | 1 | ||
| G600-710008-101 | ENGINE SLING | 1 | ||
| G601-710008-157 | ENGINE SLING , CF34 | 5 | ||
| G601-710008-320 | PIN ASSY, LOCKING | 1 | ||
| G601-710008-401 | BEAM ASSY, SLING, P0WER PLANT/ENGINE | 2 | ||
| G601−710008−163 | Adapter−Lifting Engine Sling | 1 | ||
| G601R−710008−157 | Sling − Engine/Power Plant | 1 | ||
| G601R710008−1 | Pin − Engine Installation | 6 | ||
| GSB0910008 | STRAP-TOWING | 1 | ||
| GSB0910008-1 | STRAP TOWING | 1 | ||
| GSB2910008 | BLOCK-HYDRAULIC TEST | 1 | ||
| GSB6110008 | STAND-PROPELLER TRANSPORT AND BUILD | 2 | ||
| GSB6110008-IAS | DHC-8 PROP TRANSPORT/BUILD UP STAND WITH PROP HUB ADAPTOR | 1 | ||
| H1000-800 | TRAVEL COVER, Light Weight Travel Cockpit Cover | 1 | ||
| HPR1000-8 | 20-1/2 EXTENSION TUBE | 1 | ||
| IAE1F10008 | PULLER-REMOVAL | 11 | View Images / Tech Appraisal | |
| IAE1F10008B | PULLER-REMOVAL | 1 | ||
| ITBHK1000-8 | BLIND NUT HAND TOOL KIT | 1 | ||
| J10008-1 | Plug set-engine antiice,ge9x-102b | 1 | ||
| K10008- | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 1 | ||
| K10008-1 | Protective plug eqpt-engine exhaust,ge genx | 1 | ||
| K10008-14 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GE GEnx | 2 | ||
| K10008-15 | TOOL | 1 | ||
| K10008-2 | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 1 | ||
| K10008-23 | PROTECTIVE PLUG EQUIPMENT - ENGINE EXHAUST, GE GEnx | 7 | ||
| K10008-24 | PLUG ASSY - ENGINE EXHAUST，GE GENX | 1 | ||
| K10008-4 | PROTECTIVE PLUG EQPT-THRUST REVERSER EXHAUST DUCT,GE GENX | 1 | ||
| KW1000818 | VENTILATOR FAN 300MM | 1 | ||
| LSR100080 | PUNCH | 1 | ||
| M82100083-020 | PRESSURE PORT | 1 | ||
| M82100085 | SPECIAL TOOL | 1 | ||
| MGG1000-809 | KC100 KELVIN LEAD KIT | 1 | ||
| MV0610008 | #8 FLARE .45 DEGREE MALE HOSE | 1 | ||
| NAS1100-08-6 | THIS IS NOT A TOOL | Not Available | Not Available | |
| NH1000897-40 | THIS IS NOT A TOOL | Not Available | Not Available | |
| PN-F1000884 | TOOL | 1 | ||
| PTRS1000-8 | MUFFLER | 1 | ||
| PWA10008 | ADAPTER | 1 | ||
| RB T100089 | Hoisting Ring | 2 | ||
| RBW10008 | Main Gear Box Input Seal Installation Tool | 1 | ||
| RRT100084 | TOOL | 1 | ||
| RS4932410-008 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S103-1260100080 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S1201000800000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| S1201000800100 | NACA COVER | 1 | ||
| S1201000800100-AZL | WING NACA INTAKE BLANKING COVER | 1 | ||
| S1201000800200 | NACA COVER | 1 | ||
| SB295210008K06A | AIRCRAFT SERVICE BULLETINKIT | 1 | ||
| SC10008 | CASEIH 1/4 STD 6PT SKT 1/4DR | 1 | ||
| SN10008 | NH 1/4 STD 6PT SKT 1/4 DR | 1 | ||
| SP510008 | SOCKET RETAINER | 1 | ||
| ST-1000-8019 | BUCKING BAR | 1 | ||
| ST-1000-8500 | BUCKING BAR | 1 | ||
| ST1000 8881 | BUCKING BAR | 1 | ||
| ST1000-8076 | Bucking Bar | 1 | ||
| ST1000-8252 | TOOL | 1 | ||
| ST1000-8252-1 | TOOL | 1 | ||
| ST1000-8252-2 | TOOL | 1 | ||
| ST1000-8252-3 | TOOL | 1 | ||
| ST1000-8252-4 | TOOL | 1 | ||
| ST1000-8252-5 | TOOL | 1 | ||
| ST1000-8543 | Bucking Bars | 1 | ||
| ST1000-8813 | Bucking Bar | 1 | ||
| T100089 | HOISTING RING | 1 | ||
| T41000870-1 | ADAPTER TORQUE | 1 | ||
| TDW1000-8 | DIE NUT VISE | 1 | ||
| TESA-00510008 | Tesa 00510008 Models CCMA-M Dial Calipers 0-150mm | 1 | ||
| TESA-01810008 | Tesa 01810008 - Analogue lever-type dial test indicator TAST Standard, Range - 0.5mm | 1 | ||
| TF10A10008-1 | OBTURATEUR | 1 | ||
| TMH PM01-00-08 | EXTENSION | 1 | ||
| TR10008A | 1-8IN NC RTHR DIEs | 1 | ||
| U8010008 | 9317793 : S-PR-3 RESONANCE PRO S-PR-3 RESONANCE PROBE 110 KHZ (+/- 10 KHZ) IN A 0.625 IN. DIAMETER C | 2 | ||
| Upgrade of C10008-1 to C10008-29 | Mooring eqpt-nlg | 1 | ||
| WAVEB2G10008 | EDDIE BOLT THIMBLE .33 | 1 | ||
| ZZAT381000-801 | TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
