| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 09003 | Filter Indicator | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 98D27309003000 | ELEVATOR DEVICE - LOCKING, ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32104009003 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F55109003000 | TRESTLE TRESTLE - THS, REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27309003000 | OPTICAL TOOL-INNER EL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L28209003000 | PROTECTO PROTECTOR-TYPE1 MANHOLE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L49809003000 | DEVICE FIXTURE-EXHAUST MUFFLER, APU (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L55209003000 | EXTRACTOR-SLEEVES, ELEV (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V53509003000 | PLATFORM S19 REAR PLATFORM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V53809003000 | Trestle-Supp, Tail cone (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V55109003000 | BAR SUPPORT - THS, FR102 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) A09003-2 | PIN LOCK NLG TOWING LEVER (CALIBRATION) | 1 | ||
| 09-00391 | DYE PENETRANT INSPECTION KIT (AIRCRAFT TOOL & SUPPLY, E.G. SK416) | 1 | ||
| 2280/90.03 | 2280/90.03;Calibration Report OLA-55M | 1 | ||
| 2390900320 | SLEEVE | 1 | ||
| 25090030 | IMPACT socket 3/4" 30mm | 1 | ||
| 25090032 | IMPACT socket 3/4" 32mm | 1 | ||
| 25090033 | IMPACT socket 3/4" 33mm | 1 | ||
| 26090030 | IMPACT socket 1/1" 30mm | 1 | ||
| 26090032 | IMPACT socket 1/1" 32mm | 1 | ||
| 26090033 | IMPACT socket 1/1" 33mm | 1 | ||
| 28.00.9003.040.000 | SPECIAL SOCKET WRENCH | 1 | ||
| 355A11002000-90 03 | SCREEN,SILK, CENTER OF GRAVITY | 1 | ||
| 402-090.03 | 402-090.03;QSFP-DD 4x100G PAM-4 Electrical Adapter | 1 | ||
| 4409003 | ARINC810 MOUNTING RAIL TOOL | 1 | ||
| 50-2109003-01 | GLAND HOUSING | 1 | ||
| 51200109-003 | BMP SOFTWARE | 1 | ||
| 5132909003 | HYD SET SPECIAL WRENCHES | 1 | ||
| 609003 | BOILER CUPS (3 IT) | 1 | ||
| 620-900-386-0 | PLIER | 1 | ||
| 69009-003-000 | TOOL | 1 | ||
| 699009003 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 79090030 | Spare head for hammer no.10957 30 | 1 | ||
| 79090035 | Spare head for hammer no.10957 35 | 1 | ||
| 8817909003 | EN-CLE A TENON | 1 | ||
| 909-0030-000 | DETACHABLE, TIP, PENCIL | 1 | ||
| 9564090030 | ANCHOR NUT | 1 | ||
| 97A27302009003 | GRUB SCREW WITH THRU | 1 | ||
| 9852090034 | TESTER-PROXIMITY SENSOR,TARGET | 1 | ||
| 98A09003000 | TOOL | 1 | ||
| 98A09003000000 | BAR-STEERING, NOSE WHEEL | 2 | ||
| 98A09003000001 | BAR-STEERING,NOSE WHEEL | 7 | ||
| 98A09003000002 | BAR STEERING - NLG | 1 | ||
| 98A09003000100 | GAUGE BODY | 1 | ||
| 98A09003000122 | SEMI-MANUFACTURED PROFILE | 1 | ||
| 98A09003000123 | BLIND RIVET | 1 | ||
| 98A09003000200 | TOOL | 1 | ||
| 98A09003001000 | BAR-STEERING, NOSE WHEEL | 1 | ||
| 98A09003500000 | CABLE CABLE-TOWING,MLG | 1 | ||
| 98A09003500208 | WASHER | 1 | ||
| 98A10009003000 | PLUG - APU VARIABLE AIR INTAKE | 1 | ||
| 98A49009003000 | BOROSCOPE GUIDE TOOL | 1 | ||
| 98A49009003001 | BOROSCOPE GUIDE TOOL | 1 | ||
| 98D27309003 | TOOL | 1 | ||
| 98D27309003-202 | DEV LOCK ELEV | 1 | ||
| 98D27309003000 | DEVICE - LOCKING, ELEVATOR | 26 | View Images / Tech Appraisal | |
| 98D273090030000 | ELEVATOR LOCKING DEVICE | 1 | ||
| 98D27309003200 | Dowel | 1 | ||
| 98D27309003204C | PIN | 1 | ||
| 98D27309003205 | Clip | 1 | ||
| 98D27309009003 | COLLAR DEPTH ACTUATOR | 12 | ||
| 98D32104009003 | EQUIPMENT-R I OF THE MLG ACTUATOR | 5 | ||
| 98D36109003 | TOOL | 1 | ||
| 98D36109003000 | FAV BANJ CLEAN-BLEED | 7 | ||
| 98D52003009003 | SAFETY BARRIER EMERGENCY DOORS FWD LEFT | 6 | ||
| 98D52109003 | TOOL | 1 | ||
| 98D52109003000 | TOOL | 1 | ||
| 98D52109003202 | Cutting tool | 1 | ||
| 98D55109003000 | BEARING FREEPLAY-ELEV | 4 | ||
| 98F10009003000 | PLUG APU-EDUCTOR INLET | 3 | ||
| 98F27309003 | TOOL | 1 | ||
| 98F27309003000 | DEVICE - LOCKING, ELEVATOR | 13 | View Images / Tech Appraisal | |
| 98F27309003000-REVF | DEVICE - LOCKING ELEVATOR | 1 | ||
| 98F28109003 | TOOL | 1 | ||
| 98F28109003000 | PROTECTOR - STABILIZER, MANHOLES | 2 | ||
| 98F36109003000 | BLEED DECONTAM KIT - BLEED | 1 | ||
| 98F55109003 | TOOL | 1 | ||
| 98F55109003000 | TRESTLE - THS, REMOVAL INSTALLATION | 1 | ||
| 98F55109003264 | PRESSURE SPRING | 1 | ||
| 98L27309003 | TOOL | 1 | ||
| 98L27309003000 | GAUGE-NEUTRAL SETTING,INNER ELEVATOR | 1 | ||
| 98L27309003040 | TELESCOPE | 1 | ||
| 98L27309003042 | TEST LINE | 1 | ||
| 98L27309003044 | TARGET | 1 | ||
| 98L27309003046 | STORAGE CHEST | 1 | ||
| 98L27309003100 | WELDING ASSY | 1 | ||
| 98L27309003102 | WELDING ASSY | 1 | ||
| 98L27309003104 | WELDING ASSY | 1 | ||
| 98L27309003106 | WELDING ASSY | 1 | ||
| 98L27309003108 | BOX | 1 | ||
| 98L28109003 | TOOL | 1 | ||
| 98L28109003000 | PROTECTR NACA VENT PROTECTOR | 1 | ||
| 98L28209003 | TOOL | 1 | ||
| 98L28209003000 | PROTECTOR-TYPE1 MANHOLE | 2 | ||
| 98L28209003204 | WASHER | 1 | ||
| 98L321090030000 | Collar A380 (2B+2W) | 1 | ||
| 98L32109003202 | SHROUD | 1 | ||
| 98L49809003 | TOOL | 1 | ||
| 98L49809003000 | FIXTURE-EXHAUST MUFFLER, APU | 1 | ||
| 98L52109003000 | BEARING BEARING CUT SWAGING | 1 | ||
| 98L52109003001 | BEARING BEARING CUT SWAGING | 1 | ||
| 98L52109003002 | BEARING BEARING CUT SWAGING | 1 | ||
| 98L53103009003 | PLATFORM UPPER PLATFORM SYM | 1 | ||
| 98L53509003 | TOOL | 1 | ||
| 98L53509003000 | PLATFORM-FORWARD, LEVEL2A S19 | 2 | ||
| 98L53509003100 | PLATEFORM | 1 | ||
| 98L53509003102 | LADDER | 1 | ||
| 98L53509003104 | LADDER | 1 | ||
| 98L53509003106 | STIFFENER | 1 | ||
| 98L53509003108 | ADAPTER | 1 | ||
| 98L53509003256 | TERMINAL | 1 | ||
| 98L53509003266 | THREADED BUSH | 1 | ||
| 98L53509003278 | PLATE | 1 | ||
| 98L55109003000 | BAR SUPPORT - AFT HTP | 1 | ||
| 98L55209003 | TOOL | 1 | ||
| 98L55209003000 | TOOL | 1 | ||
| 98L55209003001 | EXTRACTR EXTRACTOR-SLEEVES,ELEV | 1 | ||
| 98L55209003218 | pusher | 1 | ||
| 98L55209003252 | Pusher | 1 | ||
| 98S27008009003 | JIG | 1 | ||
| 98V24209003 | TOOL | 1 | ||
| 98V24209003000 | BLADE LOCK - RAT | 3 | ||
| 98V32109003 | TOOL | 1 | ||
| 98V32109003000 | TROLLEY, MLG DOOR | 4 | ||
| 98V32109003001 | TROLLEY - MLG DOOR | 1 | ||
| 98V32109003002 | TROLLEY TROLLEY - MLG DOOR | 1 | ||
| 98V32109003042 | Assembly 042 | 1 | ||
| 98V53009003 | TOOL | 1 | ||
| 98V53009003000 | FLOORPNL FLOOR PNL PROT-FWD AV | 1 | ||
| 98V53509003 | TOOL | 1 | ||
| 98V53509003000 | S19 REAR PLATFORM | 4 | ||
| 98V53509003001 | REAR REAR PLATFORM - S19 | 2 | ||
| 98V53809003000 | TRESTLE TRESTLE-SUPP,TAIL CONE | 1 | ||
| 98V55109003 | TOOL | 1 | ||
| 98V5510900300 | Tool | 1 | ||
| 98V55109003000 | BAR SUPPORT, HTP AFT | 3 | ||
| 99A55109003000 | REFERENCE STANDARD | 1 | ||
| 99L53509003000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| A09003 | LOCKPIN-NOSE GEAR TOWING LEVER | 3 | ||
| A09003-1 | Lock Pin - Nose Gear Towing Lever | 13 | View Images / Tech Appraisal | |
| A09003-2 | Lock Pin - Nose Gear Towing Lever | 32 | View Images / Tech Appraisal | |
| A09003-2 FLAG ONLY | LOCK PIN FLAG ONLY | 1 | ||
| A09003-2-REVC | LOCK PIN-NOSE GEAR TOWING LEVER | 2 | ||
| A09003-22 | LOCKPIN | 1 | ||
| A09003-3 | WARING STREAMER | 3 | ||
| A09003-5 | LOCK PIN | 1 | ||
| A109-003 | BUBBLE COVER (A-models w/extended radome nose) | 1 | ||
| A3-929-0009-003 | THIS IS NOT A TOOL | Not Available | Not Available | |
| CMS09003W | BEAM CLAMP 3 TON BC-3 | 1 | ||
| ED009-003 | Trent 500/700 Engine Stand Base | 1 | ||
| G36090030K01 | CASTER WITH BRAKE | 1 | ||
| J1709003 | DRUM COVER 350mm FOR 20-30 Kg | 1 | ||
| L109-003 | BUBBLE COVER (A-models w/extended radome nose) | 1 | ||
| LA09003-2 | TOWING PIN | 1 | ||
| PF09-003-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | ||
| PWC09-003 | THIS IS NOT A TOOL | Not Available | Not Available | |
| R51200109-003 | BMP SOFTWARE | 1 | ||
| Trent 500/700 ENGINE STAND BASE (Alternate to ED009-003) | FZES3081 | 1 | ||
| А09003-1 | PIN | 1 | ||
| А09003-2 | PIN | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
