| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 04-002 | OXY BENDABLE CHARGE COMBO ADAPTOR | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 98A57304002000 | AUXILIARY TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57804002000 | SLING - SLAT NO 3 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57904002000 | SLING SLING-INNER FLAP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D28004002000 | TEST TEST EQUIPMENT-APU FUEL FEED (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32104002000 | EQUIPT EQUIPMENT-MLG REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32104002001 | EQUIPMT EQUIPMENT-MLG REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32104002002 | EQUIPMENT-MLG REMOVAL INSTALLATION | 2 | ||
| (CALIB) 98D32104002003 | EQUIPMNT EQUIPMENT-MLG, REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53103504002 | GUIDE TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D57304002000 | HOIST SHARKLET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57104002040 | JACKING SET RIB - 6LH (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57104002041 | JACKING SET RIB - 6RH (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57104002042 | JACKING SET RIB - 16 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57104002044 | JACKING SET RIB - 21 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57104002046 | JACKING SET RIB - 31 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57304002000 | SLING SLING-WINGLET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32104002000 | COLLAR COLLAR, SAFETY - WLG DOOR ACTUA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32204002000 | COLLAR COLLAR, SAFETY - NLG DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L57004002000 | CRADLE CRADLE SET - WING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99A28204002000 | HARNESS-TEST (CALIBRATION) (CALIBRATION) | 1 | ||
| 0000400240 | WASHER | 1 | ||
| 04-002-6X90 | OXYGEN FILL TUBE | 1 | ||
| 04-002-S | OXY CHARGE COMBO ADAPTOR | 1 | ||
| 04-20004-0020 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 04-20004-0027 | CABLE INTERCONNECTING | 1 | ||
| 0400290030 | UNION DOUBLE | 1 | ||
| 10TD04002 | GUN-VACUUM | 1 | ||
| 19040020 | 5120QR-RATCHET REPAIR KIT - 512,512SG | 1 | ||
| 2040020-0502 | INPUT POWER CABLE ASSEMBLY | 1 | ||
| 2040020-103 | HIGH FLOW VALVE | 1 | ||
| 2040021-101 | VALVE | 1 | ||
| 2040021-102 | NGS CHECK VALVE | 1 | ||
| 2610-8004-002 | MANUEL COMPUTER CONTROLLER | 1 | ||
| 3143AA-10-4002 | FORWARD LEFT BOOTSTRAP ASSEMBLY | 1 | ||
| 32-040-02-01 | MLG FIXTURE-TRANSPORTATION | 1 | ||
| 322-1104-002 | REMOTE CONTROLLER | 1 | ||
| 3303-0004-002-CM | MOUNT FLANGE | 1 | ||
| 33069-004-002-CM | 075"THK A36 OR 1018 | 1 | ||
| 33204-002 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3404002-1 | FITTING ASSY, HOIST | 1 | ||
| 355A91-3040-02 | LIFTING UNITS | 1 | ||
| 365A91-0040-02 | SLING, COMPLETE AIRCRAFT | 1 | ||
| 403-040.02 | 403-040.02;PIM for OSFP 800G on 800G FLEX XPM Module | 1 | ||
| 4040029 | CABLE | 1 | ||
| 4041104-002 | HARNESS,HI-POT COMPRESSOR/FAN INTERCONNECTING CABLE BE AEROSPACE | 1 | ||
| 42040027 | 4204.27-27mm STRIKING FACE O/E SPANNER | 1 | ||
| 61004-002-017 | TOOL | 1 | ||
| 61007040-02 | FIRMWARE-USF, A350-900 | 1 | ||
| 65B04002 | Boeing | 1 | ||
| 6742-040020L | DRAW BOLT | 1 | ||
| 6MIT65B04002 | SOCKET SPANNER WRENCH | 12 | View Images / Tech Appraisal | |
| 6MIT65B04002-1 | Socket wrench | 1 | ||
| 6MIT65B04002-10 | WRENCH | 2 | ||
| 6MIT65B04002-11 | Socket wrench | 2 | ||
| 6MIT65B04002-11-S5 | -11 SOCKET WRENCH | 1 | ||
| 6MIT65B04002-14 | TOOL | 5 | ||
| 6MIT65B04002-16 | WRENCH | 1 | ||
| 6MIT65B04002-17 | SPANNER WRENCH | 1 | ||
| 6MIT65B04002-18 | WRENCH | 1 | ||
| 6MIT65B04002-19 | TOOL | 1 | ||
| 6MIT65B04002-2 | Socket wrench | 1 | ||
| 6MIT65B04002-20 | WRENCH | 1 | ||
| 6MIT65B04002-203 | WRENCH | 1 | ||
| 6MIT65B04002-24 | TOOL | 1 | ||
| 6MIT65B04002-3 | Socket wrench | 2 | ||
| 6MIT65B04002-4 | Socket wrench | 2 | ||
| 6MIT65B04002-5 | Socket wrench | 2 | ||
| 6MIT65B04002-6 | Socket wrench | 1 | ||
| 6MIT65B04002-7 | Socket wrench | 1 | ||
| 6MIT65B04002-8 | SOCKET WRENCH | 1 | ||
| 6MIT65B04002-9 | Socket wrench | 1 | ||
| 6MIT65B04002-S5 | 6MIT65B04002 WRENCH | 1 | ||
| 704002 | Gage Bilt Powermax Riveter - Pulling Head Extensions - 2" | 1 | ||
| 79040027 | 10955.27.R-SPARE PLASTIC HEADS | 1 | ||
| 9040020 | PR LOCKING PADS ASSY 1755/65 | 1 | ||
| 96504002 | 730R/2 QUICK - TORQUE WRENCH 4-20Nm | 1 | ||
| 9740040022 | WASHER | 1 | ||
| 97A57304002000 | SCREW REMOVAL TOOL | 1 | ||
| 97F57508704002 | REPAIR-TOOL,FAIRING 4LH | 3 | ||
| 98457304002000 | EXTRACTION MANHOLE BOLT | 1 | ||
| 9868040025 | NUT | 1 | ||
| 98A07004002000 | JACKING ADAPTOR - JACKING POINT | 9 | ||
| 98A07004002001 | NOSE JACK PAD TOOL | 1 | ||
| 98A07004002022 | ADAPTER | 1 | ||
| 98A26203004002 | BLIND CAP | 1 | ||
| 98A28404002007 | HARNESS | 1 | ||
| 98A32101004002 | PIN ASSY | 1 | ||
| 98A32201004002 | RING | 1 | ||
| 98A32301004002 | RING | 1 | ||
| 98A49107504002 | TOOL | 1 | ||
| 98A54003004002 | GRIDER | 1 | ||
| 98A55104002000 | DUMMY DOOR-TRIM TANK | 1 | ||
| 98A57004002000 | SEALING FIXTURE | 1 | ||
| 98A57004002001 | FIXTURE - SEALING | 1 | ||
| 98A57004002002 | TOOL - SEALING | 1 | ||
| 98A57304002 | LEVER ASSY MANHOLE BOLT REMOVAL TOOL | 1 | ||
| 98A57304002000 | EXTRACTION, MANHOLE BOLT | 20 | ||
| 98A57304002001 | TOOL - MANHOLE BOLT EXTRACTION | 3 | ||
| 98A57304002022 | HINGE BLOCK | 1 | ||
| 98A57304002024 | SPACER TUBE | 1 | ||
| 98A57304002026 | SPACER TUBE | 1 | ||
| 98A57304002028 | BOLT | 1 | ||
| 98A57304002030 | BOLT | 1 | ||
| 98A57304002032 | BOLT | 1 | ||
| 98A57304002034 | BOLT | 1 | ||
| 98A57304002052 | HOUSING | 1 | ||
| 98A57304002054 | SPINDLE | 1 | ||
| 98A57304002056 | DUST EXCLUDER | 1 | ||
| 98A57304002058 | DUST EXCLUDER | 1 | ||
| 98A57304002060 | PLUG | 1 | ||
| 98A57304002062 | LABEL | 1 | ||
| 98A57304002100 | ANCHOR BLOCK ASSY | 1 | ||
| 98A57304002200 | LEVER ASSY | 1 | ||
| 98A57304002300 | NUT | 1 | ||
| 98A57304002301 | NUT | 1 | ||
| 98A57304002302 | NUT | 1 | ||
| 98A57304002303 | NUT | 1 | ||
| 98A57804002000 | SLING - SLAT NO 3 | 4 | ||
| 98A57904002000 | SLING-INNER FLAP | 7 | ||
| 98A57904002001 | SLING INNER FLAP | 2 | ||
| 98A57904002024 | SPACER TUBE | 1 | ||
| 98A57904002026 | SPACER TUBE | 1 | ||
| 98A57904002028 | BOLT | 1 | ||
| 98A57904002030 | BOLT | 1 | ||
| 98A57904002032 | BOLT | 1 | ||
| 98A57904002034 | NUT | 1 | ||
| 98A57904002100 | BRACKET UPPER | 1 | ||
| 98A57904002102 | TOOL | 1 | ||
| 98A57904002104 | TOOL | 1 | ||
| 98A57904002200 | TOOL | 1 | ||
| 98A57904002300 | NUT | 1 | ||
| 98A57904002301 | NUT | 1 | ||
| 98A57904002302 | NUT | 1 | ||
| 98A57904002303 | NUT | 1 | ||
| 98A57904002400 | TOOL | 1 | ||
| 98A7004002 | JACKING ADAP A310 | 1 | ||
| 98D09104002000 | ATTACHMENT - TOWING | 1 | ||
| 98D27104002 | TOOL | 1 | ||
| 98D27104002000 | SUPPORT-AILERON ACTUATOR | 5 | ||
| 98D27104002001 | SUPPORT-AILERON ACTUATOR | 14 | ||
| 98D27104002200 | SUPPORT BAR | 1 | ||
| 98D27104002202 | PAD | 1 | ||
| 98D27104002204 | TOOL | 1 | ||
| 98D27104002206 | HEXAGONAL BOLT WITH | 1 | ||
| 98D27504002 | TOOL | 1 | ||
| 98D27504002000 | TOOL-FLAP ADJUSTING | 11 | View Images / Tech Appraisal | |
| 98D27604002 | TOOL | 1 | ||
| 98D27604002000 | STRUT SUPPORT - SPOILER 1 | 17 | ||
| 98D27604002200 | TOOL | 1 | ||
| 98D27804002 | TOOL | 1 | ||
| 98D27804002000 | TOOL | 1 | ||
| 98D27804002001 | TOOL | 1 | ||
| 98D28004002 | TOOL | 1 | ||
| 98D28004002000 | TEST EQUIPMENT-APU FUEL FEED | 20 | View Images / Tech Appraisal | |
| 98D28004002040 | UNION ASSY | 1 | ||
| 98D28004002202 | TOOL | 1 | ||
| 98D28004002206 | TUBE | 1 | ||
| 98D28004002208 | TUBE | 1 | ||
| 98D28204002 | TOOL | 1 | ||
| 98D28204002000 | CTR TANK VENT BLAN | 3 | ||
| 98D32104002 | TOOL | 1 | ||
| 98D321040020 | EQUIPMENT - MLG RI | 1 | ||
| 98D3210400200 | EQUIPMENT MLG R/I | 1 | ||
| 98D32104002000 | EQUIPMENT-MLG REMOVAL INSTALLATION | 15 | ||
| 98D321040020001 | EQUIPMENT-MLG REMOVA INSTALLATION | 1 | ||
| 98D32104002001 | EQUIPMENT-MLG REMOVAL INSTALLATION | 17 | ||
| 98D32104002001/2/3 | MLG R/I TOOL A320/1 - | 1 | ||
| 98D32104002002 | EQUIPMENT MLG, REMOVAL INSTALLATION | 14 | ||
| 98D32104002003 | EQUIPMENT-MLG, REMOVAL INSTALLATION | 13 | ||
| 98D32104002100 | BRACKET-AFT ASSY | 1 | ||
| 98D32104002103 | EQUIPMENT-MLG REMOVAL INSTALLATION | 2 | ||
| 98D32104002106 | FWD RAIL MOUNTING BRACKET | 1 | ||
| 98D32104002107 | FWD RAIL MOUNTING BRACKET | 1 | ||
| 98D32104002110 | BRACKET-AFT ASSY | 1 | ||
| 98D32104002111 | TOOL | 3 | ||
| 98D32104002116 | SHAFT- RATCHET DRIVE | 1 | ||
| 98D32104002120 | BRACKET-FWD ASSY | 1 | ||
| 98D32104002125 | PIN, PIVOT | 1 | ||
| 98D32104002130 | BRACKET-FWD ASSY | 1 | ||
| 98D32104002132 | FITTING SCREW | 1 | ||
| 98D32104002140 | BRACKET FORWARD | 1 | ||
| 98D32104002148 | BUSHING | 1 | ||
| 98D32104002149 | BUSHING | 1 | ||
| 98D32104002151 | WASHER | 1 | ||
| 98D32104002162 | SPRING GUARD | 1 | ||
| 98D32104002163 | SPRING | 2 | ||
| 98D32104002169 | LUG- BALL ATTACHMENT | 1 | ||
| 98D32104002171 | LUG- CONNECTING | 1 | ||
| 98D32104002172 | BRACKET- ATTACHMENT | 1 | ||
| 98D32104002173 | BRACKET- ATTACHMENT | 1 | ||
| 98D32104002175 | HEX HEAD BOLT | 1 | ||
| 98D32104002179 | FITTING SCREW | 1 | ||
| 98D32104002180 | BAR-CONNCTING ASSY | 2 | ||
| 98D32104002181 | TOOL | 1 | ||
| 98D32104002183 | BUSH | 2 | ||
| 98D32104002190 | BEAM-LIFTING ASSY | 1 | ||
| 98D32104002192 | LIFTING BEAM ASSY | 1 | ||
| 98D32104002193 | TOOL | 1 | ||
| 98D32104002200 | SUPPORT CABLE ASSY | 4 | ||
| 98D32104002200REP2 | STRAP - 2100MM | 1 | ||
| 98D32104002210 | SUPPORT CABLE ASSY | 2 | ||
| 98D32104002220 | BRACKET-AFT ASSY | 1 | ||
| 98D32104002223 | PIN, ROUND HEAD | 1 | ||
| 98D32104002224 | TOOL | 1 | ||
| 98D32104002226 | CAP NUT | 2 | ||
| 98D32104002230 | BRACKET-AFT ASSY | 1 | ||
| 98D32104002233 | RETAINER SPHERICAL | 1 | ||
| 98D32104002236 | SIDE PLATE | 2 | ||
| 98D32104002237 | SPACER | 2 | ||
| 98D32104002238 | TOOL | 1 | ||
| 98D32104002240 | BRACKET-AFT ASSY | 1 | ||
| 98D32104002246 | PAD- ALIGNMENT | 1 | ||
| 98D32104002247 | CUP | 1 | ||
| 98D32104002248 | TOOL | 1 | ||
| 98D32104002249 | TOOL | 3 | ||
| 98D32104002250 | BRACKET-AFT ASSY | 1 | ||
| 98D32104002251 | TOOL | 3 | ||
| 98D32104002253 | BUSH | 2 | ||
| 98D32104002257 | TOOL | 1 | ||
| 98D32104002260 | TROLLEY ASSY | 1 | ||
| 98D32104002270 | BEARING HOUSING ASSY | 1 | ||
| 98D32104002280 | BRACKEET GEAR HOUSING ASSY | 1 | ||
| 98D32104002300 | SIDE MEMBER ASSY | 1 | ||
| 98D32104002310 | SIDE MEMBER ASSY | 1 | ||
| 98D32104002320 | BRACKET-FWD ASSY | 1 | ||
| 98D32104002330 | BRACKET-FWD ASSY | 1 | ||
| 98D32104002460 | RAIL-AFT ASSY | 1 | ||
| 98D32104002470 | RIAL-FORWARD ASSY | 1 | ||
| 98D32104002510 | SUPPORT BRKT ASSY | 1 | ||
| 98D32104002520 | PIVOT BLOCK | 2 | ||
| 98D32104002530 | BEARING HOUSING ASSY | 1 | ||
| 98D32104002560 | TOOL | 3 | ||
| 98D32104002580 | TOOL | 1 | ||
| 98D3232104002001 | EQUIP MLGR/I | 1 | ||
| 98D52003004002 | BARRIER SAFETY - EMERGENCY EXITDOORS | 5 | ||
| 98D53103504002 | ROUTING TOOL | 2 | ||
| 98D55209004002 | SLING, REM.-INST.- ELEVATOR | 1 | ||
| 98D57304002 | TOOL | 1 | ||
| 98D5730400200 | HOIST SHARKLET | 1 | ||
| 98D57304002000 | HOIST SHARKLET | 10 | ||
| 98D57304002202 | TOOL | 1 | ||
| 98D57304002206 | TOOL | 1 | ||
| 98D57304002210 | TOOL | 1 | ||
| 98F28004002 | TOOL | 1 | ||
| 98F28004002000 | PROTECTOR - VENT LINE | 1 | ||
| 98F32104002 | TOOL | 1 | ||
| 98F3210400200 | ALIGN TOOL PINTLE | 1 | ||
| 98F32104002000 | TOOL-ALIGNMENT, PINTLES | 10 | ||
| 98F321040020000 | AVIATION TOOL | 1 | ||
| 98F32104002001 | TOOL-ALIGNMENT,PINTLES | 5 | ||
| 98F32104002200 | MANDREL | 1 | ||
| 98F32104002201 | MANDREL | 1 | ||
| 98F32104002202 | FWD BUSH | 1 | ||
| 98F32104002203 | FWD BUSH | 1 | ||
| 98F32104002204 | REAR BUSH | 1 | ||
| 98F32104002205 | REAR BUSH | 1 | ||
| 98F32204002000 | ADAPTER-HANDLING TROLLEY,CLG | 1 | ||
| 98F32304002 | TOOL | 1 | ||
| 98F32304002000 | R/I GUIDE-LGCIU | 4 | ||
| 98F32304002200 | TOOL | 1 | ||
| 98F32304002201 | TOOL | 1 | ||
| 98F57004002 | TOOL | 1 | ||
| 98F57004002-201 | DUMMY DOOR-NACA VENT | 1 | ||
| 98F57004002000 | DOOR-DUMMY, NACA VENT | 6 | ||
| 98F57004002204 | HEXAGON HEAD SCREW | 1 | ||
| 98F57104002 | TOOL | 1 | ||
| 98F57104002000 | TOOL | 1 | ||
| 98F57104002040 | TOOL | 1 | ||
| 98F57104002041 | TOOL | 1 | ||
| 98F57104002042 | TOOL | 1 | ||
| 98F57104002044 | TOOL | 1 | ||
| 98F57104002046 | TOOL | 1 | ||
| 98F57304002 | TOOL | 1 | ||
| 98F57304002000 | SLING-WINGLET | 12 | ||
| 98F57304002200 | STRAP UPPER | 1 | ||
| 98F57304002202 | STRAP LOWER | 1 | ||
| 98F57304002204 | SLEEVE PROT | 1 | ||
| 98F57304002206 | SLEEVE PROT | 1 | ||
| 98L27004002000 | KIT -AILERONS, R/I ACTUATOR | 1 | ||
| 98L27004002204 | BOLT | 1 | ||
| 98L28004002 | PURGING TOOL | 1 | ||
| 98L28004002000 | TOOL - PURGING | 4 | ||
| 98L28004002001 | PURGING TOOL | 1 | ||
| 98L28004002040 | ADJAUTER ASSY | 1 | ||
| 98L28004002200 | NUT | 1 | ||
| 98L28004002202 | ADJUSTER | 1 | ||
| 98L28004002204 | PROBE | 1 | ||
| 98L28004002206 | SLEEVE ROTATING | 1 | ||
| 98L28004002208 | SEAL | 1 | ||
| 98L32104002 | TOOL | 1 | ||
| 98L32104002000 | SAFETY COLLAR WLG DOOR OPEN | 1 | ||
| 98L32104002200 | COLLAR | 1 | ||
| 98L32104002202 | PAD PROOF LOAD | 1 | ||
| 98L32104002204 | PAD PROOF LOAD | 1 | ||
| 98L32204002 | TOOL | 1 | ||
| 98L32204002000 | COLLAR - SAFETY, NLG | 5 | ||
| 98L32204002100 | COLLAR SPLIT S/A | 1 | ||
| 98L32204002102 | COLLAR SPLIT S/A | 1 | ||
| 98L32204002206 | TOOL | 1 | ||
| 98L32304002000 | Device, Safety - Landing Gear Cont | 1 | ||
| 98L57004002 | TOOL | 1 | ||
| 98L57004002000 | CRADLE SET WING | 1 | ||
| 98L57004002116 | SPAR BLOCK FWD-RIB 2 | 1 | ||
| 98L57004002200 | SQUARE PIPE | 1 | ||
| 98L57004002202 | SQUARE PIPE | 1 | ||
| 98L57004002204 | SQUARE PIPE | 1 | ||
| 98L57004002206 | SQUARE PIPE | 1 | ||
| 98L57004002208 | RECTANGULAR TUBE | 1 | ||
| 98L57004002210 | RECTANGULAR TUBE | 1 | ||
| 98L57004002246 | TOP PLATE - RIB 20 | 1 | ||
| 98L57004002250 | TOP PLATE - RIB 25 | 1 | ||
| 98L57004002254 | TOP PLATE - RIB 36 | 1 | ||
| 98L57004002258 | TOP PLATE - RIB 43 | 1 | ||
| 98L57004002264 | ADAPTER PIECE | 1 | ||
| 98L57004002268 | SPACER | 1 | ||
| 98L57104002 | TOOL | 1 | ||
| 98L57104002000 | TOOL | 1 | ||
| 98S27005004002 | TOOL | 1 | ||
| 98S53605004002 | Repair Seal Entry Door | 1 | ||
| 98S53605004002-REVB | TOOL REPARATION SEAL ENTRY DOOR | 1 | ||
| 98V07104002 | TOOL | 1 | ||
| 98V07104002000 | ADAPTOR | 1 | ||
| 98V07104002000 (NLP) | ADAPTOR - WING JACKING | 1 | ||
| 98V32104002 | TOOL | 1 | ||
| 98V32104002000 | TOOL | 1 | ||
| 98V32404002 | TOOL | 1 | ||
| 98V32404002000 | AVIATIONTOOL | 2 | ||
| 98V32404002202 | TOOL | 1 | ||
| 98V57304002 | TOOL | 1 | ||
| 98V57304002000 | TOOL | 2 | ||
| 98V57504002 | TOOL | 1 | ||
| 98V57504002000 | TOOL | 1 | ||
| 9980040022 | WASHER | 1 | ||
| 9998040021 | LOCK WASHER | 1 | ||
| 99A248404002007 | TOOL | 1 | ||
| 99A28204002000 | HARNESS-TEST | 1 | ||
| 99A28404002 | TOOL | 1 | ||
| 99A28404002000 | ASSY OF HARNESSES | 1 | ||
| 99A28404002001 | HARNESS INDIVIDUAL | 1 | ||
| 99A28404002002 | HARNESS TOTAL TANK | 1 | ||
| 99A28404002003 | HARNESS COMPENSATOR | 1 | ||
| 99A28404002004 | HARNESS CARGO TANKS | 1 | ||
| 99A28404002005 | HARNESS TOTAL TANK CAD CAP & DEN | 1 | ||
| 99A28404002006 | ASSY OF HARNESSES | 1 | ||
| 99A28404002007 | ASSY OF HARNESSES | 1 | ||
| 99D57004002000 | REFERENCE STANDARD | 1 | ||
| 99D57404002000 | REFERENCE BLOCK | 1 | ||
| 99F28304002000 | DUMMY PLUG | 1 | ||
| AJSC11U180400200540U | CONVERTER-GPU | 1 | ||
| CDI20004002 | SENSOR DRIVE, GAGE & WIRING | 1 | ||
| CDI20040026S | 150 IN-LBS TRANSDUCE R STEM | 1 | ||
| CDI20040027S | SENSOR & WIRING ASSY | 1 | ||
| CVR-F-04-002 | BEVS BUBBLE CAMERA COVER | 1 | ||
| D5367530400200 | THIS IS NOT A TOOL | Not Available | Not Available | |
| EN2859D040021 | THIS IS NOT A TOOL | Not Available | Not Available | |
| F2MB971040020 | TOOL FOR CENTERING ENGINE FORWARD PINS | 1 | ||
| FK04-002 | Grease gun | 1 | ||
| HC130H0204-002 | BRAKE APPLICATION TOOL | 1 | ||
| M03-6001-0-B8-0K0-400-2-1-Z-1-007 | PRESSURE GAUGE DM17 | 1 | ||
| M83420-4-002 | CABLE: WIRE ROPE,CRES,100FT, 480LB TEST,NYLON COATED | 1 | ||
| NDT1039-040/020 | REFERENCE STANDARD, PHYSICAL | 1 | ||
| NDT1099-071/040/020 | Boeing Standard | 1 | ||
| NTG2604-002 | GAGE - PRESSURE, TIRE | 1 | ||
| PWA104002 | TOOL | 1 | ||
| PWC04-002 | GREASE, MOLYBDENUM DISULFIDE | 1 | ||
| PWC89804-002 | Adapter | 1 | ||
| RA7704-002 | AXLE JACK | 1 | ||
| RRT040022 | TOOL | 1 | ||
| RRT040023 | TOOL | 1 | ||
| TF1040-0217-0 | HOSE, | 1 | ||
| TF1040-0241-4 | HOSE: HIGH PRESSURE,RUBBER, EPDM,WIRE REIN,41IN | 1 | ||
| TO0740400200LBIN | TORQUE METER FROM 40 TO 200 LBF.IN | 1 | ||
| TR378-04002-50 | TBG: SST .625OD-.065W, | 1 | ||
| ZZ98D32104002001 | TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
