| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 012-10 | DRILL BIT, COBALT #10 | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 (CALIBRATION) | 1 | ||
| 00121-068-000 | CONNECTING CABLE | 1 | ||
| 01-1189-0012-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 0121-098-0171 | WHEEL EXTRACTOR | 1 | ||
| 0U301210 | POOSITIONING TOOL | 1 | ||
| 1.837.01-2100 | EDDY CURRENT PROBES FOR DEFECTOMETER M 1.837 | 1 | ||
| 10-0121-00 | CALIBRATION BLOCK | 1 | ||
| 10012-10 | MLG BRAKE PRESSURE TEST SET | 1 | ||
| 12-901210-000-1 | TABLE IAT EK1201 | 1 | ||
| 15A012-101 | GASKET | 1 | ||
| 2-835-01-2100 | PROBE | 1 | ||
| 206-375-012-101 | METER,SPECIAL SCALE | 3 | ||
| 264-012-10 | USB INTERFACE - MITUTOYO | 1 | ||
| 310U2301-21(0.00614 INCH) | 0.00614 INCH | 1 | ||
| 3530-0121-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 362-001-210 | WEDGE | 1 | ||
| 4001210-1 | WHEEL DEFLATOR | 1 | ||
| 401-210 | WING/ENGINE/CENTER SECTION COVERS, WINTER USE (set of 2) | 1 | ||
| 4040.12.1099.00 | SELO DE MACACO LANGA | 1 | ||
| 406-240-012-101 | Wrench Assembly | 1 | ||
| 407-240-012-101 | WRENCH | 1 | ||
| 4110.12.1099.00 | SELO DE MACACO LANGA | 1 | ||
| 412-240-012-101 | Clamp Assembly (412-240-012-101) | 1 | ||
| 4260121046 | DE-ICING TUBE | 1 | ||
| 429-240-012-101 | S0CKET | 1 | ||
| 4305901210 | PRESSURE SENSOR HOLDER | 1 | ||
| 450S-00-1-2-1-01-1-1-1-AD | 15 GALLON TURBINE OIL DISPENSER MODEL 450 | 1 | ||
| 465S-00-1-2-1-01-1-1-A | 15 GALLON SKYDROLHYJET DISPENSER MODEL 465 | 1 | ||
| 470S-00-1-2-1-01-1-1-1-B | 15 GALLON HYDRAULIC MIL-PRF-5606 DISPENSER MODEL 470 | 1 | ||
| 52347A0121-01 | TEST BLOCK | 1 | ||
| 64001-2100 | Hand Crimp Tool | 1 | ||
| 701210 | Charger for FTA-100 & Validator (100-240 VAC & 9 VDC) | 1 | ||
| 70209-06012-107 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 818266301210 | BANDSAW BLADE | 1 | ||
| 82012101-01 | TARGET BOARD ASSY | 1 | ||
| 8242001210 | MODULE SHIPPING BOX | 1 | ||
| 8243012100 | EN-PROTECTEUR DE VOILE AR | 1 | ||
| 910-1/2-100DEG | 1/2"DIA, X 1/4"SHANK DIA. X 2 1/2" OAL 100DEG SOLID CARBIDE STRAIGHT SHANK COUNTERSINKS | 1 | ||
| 910-1/2"-100° | 100° SOLID CARBIDE STRAIGHT SHANK COUNTERSINK | 1 | ||
| 9550121080 | STAIGHT UNION | 1 | ||
| 9550121090 | CONTACT,ALUMEL FEMALE | 1 | ||
| 9560121010 | RING,RETAINING | 1 | ||
| 9560121020 | GASKET | 1 | ||
| 9744012100 | CIRCLIP | 1 | ||
| 98A27508012100 | SOCKET WRENCH 1 | 1 | ||
| 98A27508012101 | SHEET METAL | 1 | ||
| 98A27508012102 | REINFORCEMENT | 1 | ||
| 98A55208012100 | EYEBOLT | 1 | ||
| 98D26203001001-210 | TOOL | 1 | ||
| 98D26203001210 | TERMINATION PLATE | 1 | ||
| 98D27104001210 | SIDE PLATE ASSY | 1 | ||
| 98D27804012101 | GAUGE | 1 | ||
| 98D27804012102 | TAG | 1 | ||
| 98D52103501210 | CLAMP | 1 | View Images / Tech Appraisal | |
| 98F07203001210 | WASHER- FRICTION | 1 | ||
| 98F27003001210 | FIXED JAW HANDLE | 1 | ||
| 98F32204001210 | HALF SHELL | 1 | ||
| 98F54003001210 | TOOL | 1 | ||
| 98F54503001210 | TOOL | 1 | ||
| 98F71201001210 | MANDATORY SIGN | 1 | ||
| 98F71203001210 | ADAPTER | 1 | ||
| 98L27601001210 | GLE REGLAGE EBHA SPOILER SET WRENCH EBHA SPOILER | 1 | ||
| 98L27801001210 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | ||
| 98L52108601210 | LATCH | 1 | ||
| 98S27008001210 | PIN | 1 | ||
| A109BF-2012-10 | TUBE | 1 | ||
| A20012-10 | SWAGING TOOL - BEARING | 1 | ||
| A26001-210 | Connector Plug | 1 | ||
| A27012-10 | TAG | 1 | ||
| A28012-10 | Usage Placard | 1 | ||
| A32012-10 | Socket | 1 | ||
| A38012-10 | AIR ASSY | 4 | ||
| A38012-10-F | AIR | 1 | ||
| AID-01210 | GUIDE PIN | 1 | ||
| BAH11101210 | 12 FLAT FILE CUT 1 | 1 | ||
| BAH11601210 | 12IN SQUARE FILECUT 1 | 1 | ||
| BAH12101210 | FILE 210 HALF RD BSTD 12IN | 1 | ||
| BAH12301210 | FILE 230 ROUND BASTRD 12IN | 1 | ||
| BAH33301210 | 12",FLAT PANSAR BLADE,CUT 1 | 1 | ||
| BAHGL012-10 | GL012 GLOVES SIZE 10 | 1 | ||
| BS1453401210003 | THIS IS NOT A TOOL | Not Available | Not Available | |
| C52012-10 | Strap | 1 | ||
| C78012-10 | Pin | 1 | ||
| DAPT60-0121-00 | PLATE,REACTION,SPECIAL | 1 | ||
| E3-6001210 | THIS IS NOT A TOOL | Not Available | Not Available | |
| EN3646A01210FN | TOOL | 1 | ||
| ENSA03-92250-12100 | Banco ensayo polvo y arena | 1 | ||
| FGFB912001210A3 | DRAIN BOTTLE | 2 | ||
| FGFB912001210A6 | FUEL TANK SUMP DRAINING TOOL BOTLE | 1 | ||
| FIL012102 | B767 free-play kit | 1 | ||
| G23012-10 | TOOL | 1 | ||
| G25012-10 | Storage box assy | 1 | ||
| G601-210003-1 | PRESS CAP ADAPTER | 1 | ||
| G601-210004-221 | KIT — PNEUMATIC PRESSURE TEST | 1 | ||
| G601-210007-1 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER(OUTFLOW VALVE) (115V/60HZ) | 1 | ||
| G601-210007-145 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) (220V/50Hz) | 1 | ||
| G601-210007-199 | KIT, PNEUMATIC PRESSURE TEST 115V/60HZ | 2 | ||
| G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 | 3 | ||
| G601-210007-201-REVG | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER (OUTFLOW VALVE) (220V/50HZ) | 1 | ||
| G601-210007-203 | KIT - PNEUMATIC PRESSURE TEST ALTITUDE LIMITER | 1 | ||
| G601-210007-3 | Kit - Pneumatic Pressure Test Altitude Limiter (Outflow Valve) | 1 | ||
| G670121000-1 | CART - NITROGEN (1 BOTTLE) | 1 | ||
| G700-101210-1 | PLUG | 1 | ||
| G71012-107 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | 1 | ||
| G71012-107-M | JIG STAND EQPT | 1 | ||
| G71012-108 | ROD | 1 | ||
| GA47301-210 | UNION | 1 | ||
| Gedore-012100 | Gedore 012100 22mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | ||
| Gedore-012105 | Gedore 012105 23mm TB OPEN END, Torque Wrench End Fittings (Captive pin) | 1 | ||
| GSE3201210 | ASSEMBLY TOOL-GSE3201210 | 1 | ||
| J32012-10 | BEAM ASSY | 1 | ||
| J78012-10 | BOLT | 1 | ||
| K71012-10 | SWIVEL NUT NUION | 1 | ||
| KS01210 | TAH ALLEN KEY 3/8" HEX | 1 | ||
| L135M6501210 | Tool, Test Plug, Tail Rotor, Gearbox | 1 | ||
| L671M3012101D341-01 | INJECTING TOOL IN THE SHANK LEVER | 1 | ||
| L671M3012101D341-02 | INJECTING TOOL | 1 | ||
| L671M3012101D341-03 | INJECTING TOOL | 1 | ||
| L672P1012101 | Tool Stop Belt | 1 | ||
| LIS80.121.000 | PARTITION HEIGHT 75MM | 1 | ||
| M01-2100 | TRIPOD SUPPORT JACK 1 TON (METRIC) | 1 | ||
| M14TC0001210 | FOAM | 1 | ||
| M2252012-102 | DIE SET | 1 | ||
| MA280012-104 | R/I EQUIPMENT- BOOM PIVOT DOOR SPRINGS | 1 | ||
| MIT7012-10 | FLEXI STAND | 1 | ||
| MTOO12-101000200 | Conformador junta pos.339 | 1 | ||
| NP0121-00 | SHROUD | 1 | ||
| NS09IND01210 | AAE W174121 SCREWDRIVER 3IN | 1 | ||
| NT8DT0130-AD-00-12-10 | ADAPTOR ASSY | 1 | ||
| NYZ701210 | 1-1/2 3/8 SL | 1 | ||
| P601-210 | WING/ENGINE NACELLE COVERS (longer wing, no intercooler), WINTER USE (set of 2) | 1 | ||
| P7-01-0012-101 | TU-14 TEST SET | 1 | ||
| P7-01-0012-102 | TEST UNIT SUPSD BY P7-01-0024-000 | 1 | ||
| P7-01-0012-103 | TEST UNIT-ESCAPE SLIDE LIGHTING SYSTEM | 1 | ||
| PTT012101 | LBV16M AH92Z | 1 | ||
| PWA 76012-10 | CONICAL SEAT TOOLING | 1 | ||
| RBEL135M-6501-210 | Tool, Test Plug, Tail Rotor, Gearbox | 2 | ||
| RBEL672P-1012-101 | Tool Stop Belt | 2 | ||
| S55479001-210 | TOOL | 1 | ||
| STW01210014 | MJ14-DN06 USE STW440MJ14 | 1 | ||
| T-12301210 | 12IN. RND BA | 1 | ||
| TC150-1210H | Transducer, 10MHz, .125", Gamma, .187"OD x 1.5" Long, Hardwired | 1 | ||
| TF1040-01-210 | HOSE: ASSEMBLY, | 1 | ||
| TF1043-0121-0 | HOSE: #4,MB,ASSEMBLY, | 1 | ||
| TF1047-0121-0 | HOSE: 1/4 GRAY, | 1 | ||
| TMH BS01-21-03 | TOOL | 1 | ||
| TMH BS01-21-04 | TOOL | 1 | ||
| TMH BS01-21-06 | TOOL | 1 | ||
| TMH BS01-21-07 | Stop piece | 1 | ||
| TMH BS01-21-08 | ENTRETOISE | 1 | ||
| TMHBS01-21-05 | AXE DE POULIE | 2 | ||
| TMHBS01-21-08-REVE | ENTRETOISE | 1 | ||
| U21901210 | SPECIFIC TOOL | 1 | ||
| WNG-3-NDI-012-10 | BOEING STANDARD | 1 | ||
| WS012103000 | PLUG | 1 | ||
| WS701210000 | SCREW | 1 | ||
| Z701-210 | WING COVERS, padded for hail protection, WINTER USE (set of 2) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
