| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 01-040 | DRILL BIT - JOBBER LENGTH - #40 | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 35M5M01040001 | SIMULATR WHEEL SPEED SIMULATOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F07203001040 | Fuselage Support (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F52003001040 | LH Tool (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) D01040K2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | ||
| 00180-104-00 | TIRE SLAVE KIT | 1 | ||
| 00180-104-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 00510-104-000 | SCREW DRIVER INSERT | 1 | ||
| 01-0400-0000 | HEAD: JACK,DASH 8-400, | 9 | ||
| 01040957 | BATTERY BLOCK | 1 | ||
| 01500104000 | INSTALL TOOL | 1 | ||
| 01500104000/10 | INSTALL TOOL | 1 | ||
| 02501040 | 540A HD SW 3/4-3/8DR x 3/4"AF HD CROW-FOOT | 1 | ||
| 0260101040 | SEAL | 1 | ||
| 0292901040 | SCREW | 1 | ||
| 0301040040 | SLEEVE | 1 | ||
| 0301040100 | SWITCH SUPPORT EQUIPED | 1 | ||
| 0301040280 | ANTICIPATOR PULLEY AXLE | 1 | ||
| 0301040290 | ANTICIPATOR AXLE | 1 | ||
| 0301040350 | ANTICIPATOR COVER | 1 | ||
| 0301040360 | STOPPEG PULLEY | 1 | ||
| 0301040370 | DRIVE PEG | 1 | ||
| 0301040380 | BEARING RING | 1 | ||
| 0301040440 | SUPPORT | 1 | ||
| 0301040450 | SPRING | 1 | ||
| 0301040470 | UNION 90 DEGREES | 1 | ||
| 0301040480 | SUPPORT | 1 | ||
| 0301040490 | LUG,GROUDING | 1 | ||
| 0301040640 | CABLE STOP | 1 | ||
| 0301040660 | SPACER | 1 | ||
| 0301040680 | SUPPORT | 1 | ||
| 0301040700 | SUPPORT | 1 | ||
| 0301040860 | UNION, THREATED | 1 | ||
| 0301040870 | PLUG, SUPPORT | 1 | ||
| 0301040880 | SUPPORT | 1 | ||
| 0301040900 | SPACER | 1 | ||
| 0319301040 | SLEEVE,ATTACHING | 1 | ||
| 100-3010-401 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 101040 | GAUGE PRESSURE 0-1400KPA 1IN NPT BOTTOM CONNECTION MODEL 233.30.100 WIKA 68146043 | 1 | ||
| 10801040 | TOOL-WASTELINE,CLEAN | 1 | ||
| 109-3501-04-01 | TOOL ASSY, MLG WHEEL ASSEMBLY | 1 | ||
| 120104.01 | Norbar 120104.01 - TW 3AR-N P TYPE 1" SQ | 1 | ||
| 1500104000 | INSTALL TOOL | 1 | ||
| 170-33010-401-11H1 | SLING, OUTBOARD FLAP | 1 | ||
| 170-39010-401-11H1 | SLING, INBOARD FLAP | 1 | ||
| 1901040 | Reforming Tool | 1 | ||
| 199-177101-04.00 | FIELD ANALYZER SOFT-WARE | 1 | ||
| 2001040 | mobile 8-head storage system for up to eight AERO or Tronair multi-towbar heads. Heavy duty stainless steel construction. Includes 2 locking and 2 rigid casters. Additional racks may be bolted together for up to 16 heads. | 1 | ||
| 2117-T010-401 | DEVICE - REM/INSTL, NLG DOWNLOCK RE-LEASE ACTUATOR | 1 | ||
| 2117-T010-401-REVA | LOCKING STAY INSTALLATION DEVICE ASSY | 1 | ||
| 212-10-10-1040-000 | TOWING PIN | 1 | ||
| 2210-D10-1040 | TEST ADAPTER - ADC | 1 | ||
| 2317-T010-401 | DEVICE - REM, LOCKING ACTUATOR PIN, MLG | 3 | ||
| 2370-T010-401 | PROXIMITY SWITCH AD-JUSTMENT TOOL | 4 | ||
| 2501040 | 3/8DR x 3/4"AF HD CROW-FOOT | 1 | ||
| 3201-0405 | PIP PIN | 1 | ||
| 3201-0406 | QUICK RELEASE PIN | 4 | ||
| 3201-0407 | PIP PIN | 3 | ||
| 3201-0408 | PIP PIN | 1 | ||
| 3201-0409 | PIP PIN (3201-0409) 1/4" DIA X 0.9" GRIP | 4 | ||
| 35M5M01040000 | WHEEL SPEED SIMULATOR | 1 | ||
| 35M5M01040001 | WHEEL SPEED SIMULATOR | 3 | ||
| 370R-01-1-0-1-04-0-0-1 | TOOL | 1 | ||
| 45071000104-001 | JACK PAD, NOSE TIE DOWN | 1 | ||
| 4507100104-001 | Jack Pad Nose (Drilled) | 3 | ||
| 4507100104-003 | ADAPTER ASSY, JACK, NOSE | 3 | ||
| 46201040 | SCREWDRIVER | 2 | ||
| 466200-0104-0101 | SENSOR | 1 | ||
| 47001-040-000 | PW4000 PEDESTAL ADAPTER KIT | 1 | ||
| 48201040 | 48201040-3K DRALL SCREWDRIVER 4X100 | 1 | ||
| 501040 | FITTING | 1 | ||
| 64001-0400 | Hand Crimp Tool | 1 | ||
| 70104-04 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 70104-05 | BOELUBE 5 GALLON PAIL LIQUID | 1 | ||
| 70104-07 | BOELUBE 15 GALLON DRUM LIQUID | 1 | ||
| 70104-08021-041 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 70104-09 | BOELUB-RED 55 GALLON DRUM | 1 | ||
| 70BMJ01040 | EN-CALCULATEUR NUMERIQUE | 1 | ||
| 70BMN01040 | ENGINE ELECTRONIC CONTROL UNIT | 1 | ||
| 70EMK01040 | DIGITAL ENGINE CONTROL UNIT | 1 | ||
| 70EMP01040 | ELECTRONIC CONTROL UNIT | 1 | ||
| 74010401 | 39/PKW-TYRE LEVER | 1 | ||
| 76700-20104-041 | SEAL INSTALLER | 1 | ||
| 77401040 | 12921.40-TELESCOPIC MIRROR 40mm dia | 1 | ||
| 79401040 | 12921.NR.40-REPLACEMENT MIRROR 40MM | 1 | ||
| 80-01040-0009-7 | ELECTRICAL TAPE 70 1 | 1 | ||
| 90001-040 | GUARD,MECH DR:F/SHROUD ASSY,SWIVEL HUB12 | 1 | ||
| 9590010400 | EN-DILUANT DL 151 (5L) | 1 | ||
| 96501040 | 714R/40-T/WRENCH 40-400Nm WITH INSERT | 1 | ||
| 9682010402 | O'RING SEAL | 1 | ||
| 97a32302001040 | BOX 7 PRESSURE GAUGES | 1 | ||
| 9840104008 | SCREW | 1 | ||
| 9840104012 | SCREW | 1 | ||
| 9840104014 | SCREW | 1 | ||
| 98a28108001040 | THRUST ROD,COMPL. | 1 | ||
| 98A29001001040 | UNIT FILLING-AIRCRAFT BRAKE SYSTEM | 1 | ||
| 98A29003001040 | PUMP ASSY | 1 | ||
| 98A52208001040 | TOOLS-CARGO COMPARTMENT DOORS | 1 | ||
| 98D07103001040 | NOSE JACK TRIPOD A320 NEO | 3 | ||
| 98D07209001040 | CRADLE | 1 | ||
| 98D26203001040 | TEST TOOL - FIRE EXTINGUISHING SYSTEM | 1 | ||
| 98D27309001040 | ELEVATOR NEUTRAL SETTING LH | 8 | View Images / Tech Appraisal | |
| 98D27309001040 LH | ELEVATOR NEUTRAL SETTING | 1 | ||
| 98D36109001040 | TOOL | 1 | ||
| 98D47209001040 | TESTER | 1 | ||
| 98D49209001040 | TOOL | 2 | ||
| 98D52103501040 | BALLAST WEIGHT-PAX CREW DOOR- BASE PLATE | 1 | ||
| 98D71203501040 | TOOL | 1 | ||
| 98F07103001040 | NOSE JACK | 1 | ||
| 98F07203001040 | TOOL | 2 | ||
| 98F07209001040 | SHORING KIT THS RIB 7 RIGHT | 1 | ||
| 98F27309001040 | ELEV. NEUT. SETTING L. | 1 | ||
| 98F27608701040 | COLLARSPOILER 1 | 5 | ||
| 98F52003001040 | POSITIONER-FITTING, AFT CLG DOOR, LH | 2 | ||
| 98F52108001040 | WARNING STREAMER,COMPL. | 1 | ||
| 98L07103001040 | TOOL | 1 | ||
| 98L38108001040 | KEY DISC COMPLETE | 1 | ||
| 98L52108601040 | DEVICE-STOPPER,DOOR FESTSTELLER,TUER | 1 | ||
| 98L71203001040 | DEVICE, RI - ENGINE MOUNTS AND | 1 | ||
| 98S71003001040 | JIG KIT | 1 | ||
| 99L71003001040 | REFERENCE BLOCK | 1 | ||
| A0104094 | PLUNGER | 1 | ||
| A0104097 | SCREW CAP | 1 | ||
| A11-001-04-01 | SHIPPING CRADLE - HTP | 1 | ||
| AGE-01040 | TOOL | 1 | ||
| AGE-03010-401 | SUPPORT, ASSY - ALIGNMENT, INERTIAL | 1 | ||
| AIP12-01040 | ENGINE CALIBRATION SET-UP KIT | 1 | ||
| B6T-51-001-04 & -05 | Floor Fitting Alignment Tool | 1 | ||
| C21010-40 | CLEANING WAND EQPT - HEAT EXCHANGER 0 | 1 | ||
| C49010-40 | CRADLE APU | 1 | ||
| C543901-04-01 | PIPE SUPPORT HEIGHT ADJUSTER | 1 | ||
| CG9000104-0001 | KIT AFT FUSE AND EMPANNAGE DRILLS | 1 | ||
| CHA701-040 | BACKLASH CHECKING ASSEMBLY | 1 | ||
| D01040 | JACK | 1 | ||
| D01040K2D1B01B0 | PNEUMATIC WING JACKING | 1 | ||
| DN100-10-400 | MANOMETER | 1 | ||
| EXBD400-50104−001 | CONFIRM FROM NDT FOR STANDARD | 1 | ||
| FB70010-40 | UPPER BRACE LUG | 1 | ||
| FB70010-400 | HEIGHT EXTENSION SETCFM56-5B ENGINE | 1 | ||
| FPK-PRO-104-00 | ROTARY FLAPPER PEEING | 2 | ||
| G5M5M01040000 | WHEEL SPEED SIMULATOR | 1 | ||
| GEC1010-400 | AIRCRAFT WEIGHT & BALANCE SYSTEM | 1 | ||
| Gedore-010400 | Gedore 010400 BDS80ES - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | ||
| Gedore-010405 | Gedore 010405 SSB80ESN | 1 | ||
| GPT401-04-03-01-01-010-04-P | TOOL | 1 | ||
| GPT401-04-04-01-01-010-04-P | TOOL | 1 | ||
| HC130H0104-000 | FLAP TQ SHAFT DRIVER | 1 | ||
| HFL700010402 | 00 20 17 PLIER SET | 1 | ||
| NS09IND01040 | OTC 6770 DUMMY BEARING KIT | 1 | ||
| RB 92700-10400-041 | Rigging pin kit | 1 | ||
| S1700010401 | YOKE/SENSOR 100 | 1 | ||
| S1724010401 | YOKE/SENSOR 240 | 1 | ||
| S1724010402 | YOKE/SENSOR, MICROTECH 240"LB | 1 | ||
| S2124010401 | LASER END CAP MICRO | 1 | ||
| S2124010405 | END CAP, MICROTECH, ION | 1 | ||
| TO-10-400 | MOORING SLING | 1 | ||
| TS.790.10.40 | PLUG FITTING OR EQUIVALENT | 1 | ||
| TS.790.10.40 MK12 | PLUG FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM BOMBARDIER | 1 | ||
| TS.790.10.40 MK16 | PLUG FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM | 1 | ||
| TS.790.10.40 MK20 | PLUG FITTING OR EQUIVALENT COMMERCIALLY AVAILABLE FROM | 1 | ||
| Z601-040 | CANOPY COVER, CH-200 model | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
