| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 01-030 | DRILL BIT - JOBBER LENGTH - #30 | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F10103001000 | PLUG-ANTI ICE OUTLET AIR INTAKE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000103-0001 | HSTAB ZERO LOAD FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| 00510-103-000 | SOCKET WRENCH | 1 | |
| 01030005 | 40.D.5-1/4"DR x 5mm SOCKET BI-HEX | 1 | |
| 01030006 | 40.D.6-1/4"DR x 6mm SOCKET BI-HEX | 1 | |
| 01030007 | 40.D.7-1/4"DR x 7mm SOCKET BI-HEX | 1 | |
| 01030008 | 40.D.8-1/4"DR x 8mm SOCKET BI-HEX | 1 | |
| 01030009 | 40.D.9-1/4"DR x 9mm SOCKET BI-HEX | 1 | |
| 01030010 | 40.D.10-1/4"DR x 10mm SOCKET BI-HEX | 1 | |
| 01030011 | 40.D.11-1/4"DR x 11mm SOCKET BI-HEX | 1 | |
| 01030012 | 40.D.12-1/4"DR x 12mm SOCKET BI-HEX | 1 | |
| 01030013 | 40.D.13-1/4"DR x 13mm SOCKET BI-HEX | 1 | |
| 01030014 | 40.D.14-1/4"DR x 14mm SOCKET BI-HEX | 1 | |
| 01030055 | 40.D.5,5-1/4"DR x 5.5mm SOCKET BI-HEX | 1 | |
| 010301 | BIRTEX FACE MASK TEST KIT | 1 | |
| 01500103000 | INSTALL TOOL | 1 | |
| 0301030010 | BRACKET | 1 | |
| 0301030080 | UNION,JET | 1 | |
| 0301030130 | UNION | 1 | |
| 0301030230 | SUPPORT | 1 | |
| 0301030240 | STOP SPACER | 1 | |
| 0301030430 | SPACER | 1 | |
| 0301030580 | STOP RING | 1 | |
| 0301030590 | SEALING RING | 1 | |
| 0301030690 | SUPPORT | 1 | |
| 0301030700 | SUPPORT | 1 | |
| 0301030720 | SUPPORT | 1 | |
| 0301030810 | JET | 1 | |
| 0301030850 | SPECIAL BUSH | 1 | |
| 0301030890 | BLANK | 1 | |
| 0319301030 | DUCT | 1 | |
| 0U301030 | HANDLING TOOL FOR MOTOR PUMP | 1 | |
| 1001-0-3065 | SENSOR,PROXIMITY-ACTUATOR, DEACTUATOR | 1 | |
| 10020-10-30PSI | MANOMETER PRESSURE GAUGE | 2 | |
| 109-3501-03-01 | WRENCH SET WHEEL ASSY | 1 | |
| 109-3501-03-03 | PIN | 1 | |
| 1159C40103-01-02-BSP | TORQUE ADAPTER SPANNER WRENCH | 1 | |
| 150-10307-00 | TOOL | 1 | |
| 160-103025-001 | THIS IS NOT A TOOL | Not Available | Not Available |
| 199-177101-03.00 | FIELD ANALYZER SOFTWARE | 1 | |
| 2001030 | WC180-RJ2-G Low Profile Potable Water Service Cart. Includes hose & couplers required for servicing aircraft. Honda GX160 electric start engine mated to a Teel centrifugal pump (31gpm @ 25psi; 29psi max), 180 gallon capacity corrosion proof stainless ste | 1 | |
| 212-10-10-1030-000 | ELEVATOR GUST LOCK | 1 | |
| 250G-05-2-0-1-03-0-0 | CHECK VALVE SET AT 30 PSIG. PF53361-102P | 1 | |
| 27-1338-0103-02 | ASSEMBLY JIG | 1 | |
| 27-1338-0103-03 | WRENCH FOR NUT | 1 | |
| 27-1338-0103-04 | WRENCH TIGHTENING PRESSURE | 1 | |
| 2MITRD00103012 | THRUST REVERSER PRIMARY LOCK HOLD OPEN TOOL | 1 | |
| 2MITRD00103012-GSE | THRUST REVERSER PRIMARY LOCK HOLD OPEN TOOL | 1 | |
| 2MITRD0103012 | T/REV PRIMARY LOCK HOLD- OPEN TOOL 2MITRD0103012-GSE | 1 | |
| 301030010 | THIS IS NOT A TOOL | Not Available | Not Available |
| 335-300-103-0 | THIS IS NOT A TOOL | Not Available | Not Available |
| 350G-06-3-0-1-03-0-0-1 | TOOL | 1 | |
| 3550-1030 | PRESSURE REGULATOR | 1 | |
| 379-010-300 | SLIDING PROBE | 1 | |
| 3900-0103-0000 | Cover Bearing | 1 | |
| 40103030 | 14.30-30MM COMBINATION SPANNER LONG | 1 | |
| 4133801030 | THIS IS NOT A TOOL | Not Available | Not Available |
| 5.41.4701.0300.00 | THIS IS NOT A TOOL | Not Available | Not Available |
| 573-119-10 10-300 0,01 ±0,15 | MITUTOYO | 1 | |
| 60-1030 | NAME PLATE FOR SPT-550-1 | 1 | |
| 60-6001-0306-7 | ROLOC DISC ORANGE | 1 | |
| 640-010-301 | Probe cable 12 pin Lemo/Microdot | 1 | |
| 64001-0300 | Hand Crimp Tool | 1 | |
| 65WE01030-3 | PUMP, HYDRAULIC HOUSING | 1 | |
| 6774-01030 | Body Regulator | 1 | |
| 70103-08801-103 | THIS IS NOT A TOOL | Not Available | Not Available |
| 70103-08802-102 | THIS IS NOT A TOOL | Not Available | Not Available |
| 70103-08802-103 | THIS IS NOT A TOOL | Not Available | Not Available |
| 7010309947 | PLUNGER 2:1 | 1 | |
| 702-64501-0302 | Infrared Thermal Imaging Camera inc.WIFI | 1 | |
| 70BMB01030 | THIS IS NOT A TOOL | Not Available | Not Available |
| 70BMB01030-N | THIS IS NOT A TOOL | Not Available | Not Available |
| 70BMC01030 | THIS IS NOT A TOOL | Not Available | Not Available |
| 70BMD01030 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMF01030 | THIS IS NOT A TOOL | Not Available | Not Available |
| 70BMJ01030 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 76700-20103-041 | WRENCH ASSY | 1 | |
| 76700-20103-042 | TORQUE REACTOR | 1 | |
| 77401030 | 12921N.30-TELESCOPIC MIRROR 30mm dia | 2 | |
| 77401030 STAH | 12921N 30 TELESKOPINIS VEIDRODĖLIS STWL | 1 | |
| 79401030 | 12921.NR.30-REPLACEMENT MIRROR 30MM | 1 | |
| 80000-03-02010301 | PMAT2000 TEST KIT | 1 | |
| 801-0103-01 | Flight Line Computer | 1 | |
| 83010307 | 83010307-INSERT FOR BOX 40/2 | 1 | |
| 92700-10302-041 | LIFT RING ASSY | 1 | |
| 92700-10309-041 | WRENCH | 1 | |
| 92MITRD00103012 | THRUST REVERSER TOOL | 1 | |
| 9801030814 | SCREW | 1 | |
| 9840103010 | SCREW | 1 | |
| 9840103014 | SCREW | 1 | |
| 98A7101030000 | TOOL | 1 | |
| 98D10103001000 | TOOL | 1 | |
| 98D10103002000 | TOOL | 1 | |
| 98D10103003000 | TOOL | 1 | |
| 98D10103004000 | TOOL | 1 | |
| 98D10103005000 | INLET COVER | 1 | |
| 98F10103000 | TOOL | 1 | |
| 98F10103000000 | COVER-AIR INTAKE COWL | 9 | |
| 98F10103001 | PROTECTION PLUG | 1 | |
| 98F10103001000 | PLUG-ANTI ICE OUTLET AIR INTAKE | 5 | |
| 98F10103002040 | AIR INTAKE STORAGE COVER | 1 | |
| 98F10103003 | TOOL | 1 | |
| 98F10103003000 | PROTECTIVE RUG - INLET | 5 | |
| 98F10103003040 | TAPIS EUIQPE | 1 | |
| 98F10103003200 | TAPIS | 1 | |
| 98F10103003202 | TAPIS | 1 | |
| 98F10103004000 | A330 TRENT 700 MVP BAG | 1 | |
| 98F32301030000 | SPANNER - ACTUATOR UPPER PIN CLG | 1 | |
| 98L12001030000 | PLATFORM,NLG BAYS-FRONT FAIR | 1 | |
| 98V10103001000 | TOOL | 1 | |
| A-E02010300 | EDDY CURRENT EQUIPMENT ELOTEST | 1 | |
| A21010-30 | TEST EQUIPMENT | 1 | |
| A52010-30 | STRAP | 1 | |
| ACT-010-30PWST | FIRE PROTECTION SYSTEM BREAKOUT BOX | 1 | |
| ACT-01030P884/081515 | INTERFACE TEST HARNESS | 1 | |
| AFNDT-3010/304 | 11 STEP WEDGE. STEP THICKNESS OF , .050", .100", .200", .300", .400", .500", .600", .700", .800" .900", 1.0" +/-.001". Pad Size: .75" x 75" . Material: 304 Stainless Steel. Includes Certification Report traceable to NIST. | 1 | |
| AVSNP01030 | AVIATION TIN SNIPS-STRAGHT CUT | 1 | |
| B32010-30 | Thread Protector | 2 | |
| B54010-30 | DRILL JIG - NACELLE DIAGONAL BRACE, RB211-535 | 2 | |
| B54010-30-M | DRILL JIG-NACELLE DIAGONAL | 1 | |
| BAH11101030 | FLAT FILE SMOOTH | 1 | |
| BAH11601030 | 10IN SQUARE FILECUT 3 | 1 | |
| BAH11701030 | 10IN 3 SQUARE FILE CUT 3 | 1 | |
| BAH12101030 | 10IN HALF ROUND FILE CUT 3 | 1 | |
| BAH12301030 | 10IN ROUND FILE CUT 3 | 1 | |
| BS145-34-0103/0000 | THIS IS NOT A TOOL | Not Available | Not Available |
| C49010-30 | Base Tube | 1 | |
| C543901-03-01 | PIPE SUPPORT HORIZONTAL | 1 | |
| C55010-30 | PLATE | 1 | |
| C55010-30-ML | MFD PART LESS ANODIZING | 1 | |
| CG9000103-0001 | HSTAB ZERO LOAD FIXTURE | 1 | |
| CO103-0938 | COBALT LONG 3/32" THREADED SHANK ADAPTER DRILL | 1 | |
| CO103-0980 | COBALT LONG 40 THREADED SHANK ADAPTER DRILL | 1 | |
| CS-EF2-AG1050103-03 | Teclado | 1 | |
| CS-F20-AG101-03-08 | fusible | 1 | |
| CT-010-30PWST E CFR-4AS-53000 | CONTROL WHEEL CHECKING TOOL | 1 | |
| CTI-01-03-01 | TOOL TROLLEY | 1 | |
| D01030K2D1B01B0 | AFT BODY TRIPOD JACK B737 | 1 | |
| EXBD400-50103-001 | CONFIRM FROM NDT FOR STANDARD | 1 | |
| FB70010-30 | LUG | 1 | |
| FPK-PRO-103-00 | ROTARY FLAPPER PEENING | 1 | |
| G1250-1030N | WASHER: FLT,NARROW,#10, | 1 | |
| G27010-30 | PAD ASSY | 1 | |
| G71010-30 | SHAFT ASSY | 1 | |
| GBO30-010-300 | ADAPTER-FOR LOADCELL | 1 | |
| Gedore-010300 | Gedore 010300 BDS80A - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| HC130H0103-000 | FLAP TORQUE SHAFT DRIVE ADAPTOR | 4 | |
| HK010308 | JAW CASE | 1 | |
| HKW010308 | JAW CASE | 1 | |
| J28010-30 | TUBE ASSY | 1 | |
| J32010-30 | LOCKPLATE ASSY | 1 | |
| K20010-30 | WEB SLING ASSY | 1 | |
| KW0103087 | TOGGLE CLAMP | 1 | |
| MHH-010300 | TORQUE WRENCH 16-80 NM BDS80A | 1 | |
| MITRD00103013 | THRUST REVERSER DEPLOYED GROUND [SAFETY SLEEVE] LOCK | 1 | |
| MITRD00103013-9051 | LOCK-THRUST REV. DEPLOYED-GRD ( SAFETY SLEEVE) | 1 | |
| MITRD00103017 | T/REV DOOR OPENING TOOL MITRD00103017-GSE | 1 | |
| MITRD00103017-GSE | THRUST REVERSER HOD OPEN TOOL | 1 | |
| NS09IND01030 | OTC 6497 TRANSFER SHAFT WRENCH | 1 | |
| OHMERD00103005 | MULTI -FUNXTION SLING | 1 | |
| PMERD00103005 | THRUST REVERSET TRANSPORT DOLLY | 1 | |
| PMERD00103005-GSE | THRUST REVERSER TRANSPORTATION DOLLY | 1 | |
| RB 92700-10300-041 | Seal installation tool | 2 | |
| RB 92700-10301-041 | Pitch beam puller | 2 | |
| RB 92700-10302-041 | Lift ring assembly | 2 | |
| RB 92700-10303-041 | Wrench and reactor set | 2 | |
| RB 92700-10304-041 | Inboard seal installer | 2 | |
| RB 92700-10304-042 | Outboard seal installer | 2 | |
| RB 92700-10305-041 | Tail Gear Box & Input Gear Box Seal Installer | 2 | |
| RB 92700-10307-041 | TR Nut Wrench | 2 | |
| RB 92700-10308-041 | Seal Installer | 2 | |
| RB 92700-10309-042 | Tail blade wrench (De-ice) | 2 | |
| RT3-4340-.10/.30 | 3 Step Wedge 4340 1" x 4" .10 .20 .30 | 1 | |
| SP0-1030 | ULTRASONIER ( DC-8 ) | 1 | |
| TMHAS01-03-00 | SCREW -750MM | 3 | |
| V64-01.03-06 | SLING, LH/RH OUTER WING | 1 | |
| Z601-030 | EXTENDED CANOPY COVER, 650 model | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
