| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 010-10 | DRILL BIT, COBALT | 2 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| (CALIB) 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT (CALIBRATION) | 1 | ||
| (CALIB) 97000D23401001010 | FX ADAPTATEUR ENS. BOOMSET | 1 | ||
| (CALIB) 98S57005001010 | KIT DEMONTAGE DES PANNEAUX EXTRADOS VOIL | 1 | ||
| (CALIB) 99A32501010000 | DEVICE - TESTING ADJUSTMENT, N.G. (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) B01801E02010100 | TESTER TESTER-PROXIMITY SENSOR,DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9210101-0001 | ASSY, TEST, ECS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) DC400 (101-00800) DC400A (101-00850) WITH DC400A MODULE | DIGITAL DC FUEL QUANTITY TEST SET (BARFIELD INC.) (CALIBRATION) | 1 | ||
| 00-010106 | TRANDUCER CONCAVE DETAIL | 1 | ||
| 01-1182-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1187-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1193-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1196-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1211-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1229-0010-10 | TOWBAR: CUSTOM 3 INCH RING, | 1 | ||
| 01-1234-0010-10 | KIT: OPTION,3IN ID EYEBOLT, | 1 | ||
| 01-1270-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1275-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1277-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1281-0010-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 010-10040-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 010-10579-20 | USB DATA CARD PROGRAMMER | 1 | ||
| 0101-071 | NITROGEN REGULATOR | 1 | ||
| 01010003 | 40.3 - 1/4"DR X 3mm SOCKET,HEXAGON | 1 | ||
| 01010004 | 40.4 - 1/4"DR x 4mm SOCKETS, HEXAGON | 1 | ||
| 01010005 | 40.5 - 1/4"DR x 5mm SOCKETS, HEXAGON | 1 | ||
| 01010006 | 40.6 - 1/4"DR x 6mm SOCKETS, HEXAGON | 1 | ||
| 01010007 | 40.7 - 1/4"DR x 7mm SOCKETS, HEXAGON | 1 | ||
| 01010008 | 40.8 - 1/4"DR x 8mm SOCKETS, HEXAGON | 1 | ||
| 01010009 | 40.9 - 1/4"DR x 9mm SOCKETS, HEXAGON | 1 | ||
| 01010010 | 40.10 - 1/4"DR x 10mm SOCKETS, HEXAGON | 1 | ||
| 01010011 | 40.11 - 1/4"DR x 11mm SOCKETS, HEXAGON | 1 | ||
| 01010012 | 40.12 - 1/4"DR x 12mm SOCKETS, HEXAGON | 1 | ||
| 01010013 | 40.13 - 1/4"DR x 13mm SOCKETS, HEXAGON | 1 | ||
| 01010014 | 40.14 - 1/4"DR x 14mm SOCKETS, HEXAGON | 1 | ||
| 01010032 | 40.3,2 - 1/4"DR x 3.2mm SOCKETS, HEX | 1 | ||
| 01010035 | 40.3,5 - 1/4"DR x 3.5mm SOCKETS, HEX | 1 | ||
| 01010045 | 40.4,5 - 1/4"DR x 4.5mm SOCKETS, HEX | 1 | ||
| 01010055 | 40.5,5 - 1/4"DR x 5.5mm SOCKETS, HEX | 1 | ||
| 010100A72130 | BREAKAWAY TORQUE TESTER | 1 | ||
| 02-0501-0100 | AIRCRAFT JACKS, NOSE | 1 | ||
| 0260101040 | SEAL | 1 | ||
| 0301010410 | SUPPORT | 1 | ||
| 0301010540 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 0301010550 | BRACKET | 1 | ||
| 0301010800 | SUPPORT | 1 | ||
| 0301010830 | SUPPORT | 1 | ||
| 0301010860 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 0301010900 | BRACKET ANGLE | 1 | ||
| 0301010930 | BRACKET | 1 | ||
| 0301010940 | SPACER | 1 | ||
| 0301010950 | UNION | 1 | ||
| 08-01-0102 | CONNECTEUR | 1 | ||
| 0U301010 | HOLDING BUSH | 1 | ||
| 10-210101-005 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 10-210101-011 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 10-450101-001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 101-01001 | GROUND LEAD | 1 | ||
| 101-01007 | GROUND LEAD (BARFIELD INC.) | 1 | ||
| 101-01008 | BNC COAXIAL CABLES - BARFIELD | 6 | ||
| 101-01010 | BANANA LEAD PAIR - BARFIELD | 3 | ||
| 101-01012 | LEAD:, | 8 | ||
| 101-01017 | ACCESSOIRES BARFIELD | 1 | ||
| 101-01018 | ACCESSOIRES BARFIELD | 1 | ||
| 101-01023 | CABLE: ASSEMBLY, | 1 | ||
| 101-0109 | SPOILERRVDT TEST SET TOOL | 1 | ||
| 101010 | Adapter | 1 | ||
| 10101000CR | THIS IS NOT A TOOL | Not Available | Not Available | |
| 109-0500-10-109 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 109-3110-10-101 | Swashplate Positioning Tool | 1 | ||
| 11-01-0101 | Flat Blade Female Crimp Terminal, 14-20 AWG | 1 | ||
| 11010108 | KATUN SCR DR 10108 | 1 | ||
| 11B6650-1010 | Unit, Ground Power 60kva (Ce) | 1 | ||
| 11C-6650-1010 | EXTERNAL GROUND POWER UNIT 400HZ AC | 1 | ||
| 12-101010-880-0 | MAGNET-ELECTR EQUPD | 1 | ||
| 120101.01 | Norbar 120101.01 - TW 3AR-N 1" SQ. DR. N.m/lbf.ft | 1 | ||
| 13010-10 | TORQ-SET-MPLUSNO.10 | 4 | View Images / Tech Appraisal | |
| 151010-10X35MM | 10X MAGNIFYING GLASS | 1 | ||
| 20-1010T | DEAD BLOW HAMMER WITH PLASTIC TIPS 1.25'' | 1 | ||
| 2001010 | LC180-RJ2E Low Profile Aircraft Lavatory Service Cart. Includes all hoses & couplers required to service aircraft. 12V electric pump kit (7gpm @ 60psi) with onboard charging system, 110 gallon waste and 70 gallon fill tanks of rotationally molded polyeth | 1 | ||
| 212-10-10-1000-1 | TAIL STAND | 1 | ||
| 212-10-10-1030-000 | ELEVATOR GUST LOCK | 1 | ||
| 212-10-10-1040-000 | TOWING PIN | 1 | ||
| 2301-0101-001 | STREAMER | 1 | ||
| 2330101026 | TOOL | 1 | ||
| 250G-00-1-0-1-01-0-0-0-A | IDG OIL DISPENSER / RIG | 1 | ||
| 260P-00-1-0-1-01-0-0-A | HYDRAULIC SERVICE UNIT | 1 | ||
| 260P-04-1-0-1-01-0-0 | HYDRAULIC FLUID DISPENSER | 1 | ||
| 27-1338-0101-03 | TOOL LOOSENING TIGHTENING NUT | 1 | ||
| 30-900-1010 | Sylvac 30-900-1010 Transducer Probe P10 Linear Measuring Range 10mm/0.4" | 1 | ||
| 30010-1026 | BRUSH | 5 | ||
| 301010930 | TOOL | 1 | ||
| 3021A0101-01 | CALIBRATION,TOOL | 1 | ||
| 305-110-101-0 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 3101010 | Hanson 3101010 48-Piece Master Extractor Kit with Cobalt Left Hand Bits | 1 | ||
| 35M5M01010000 | TEST SET-THS TRAVEL LIMIT SWITCHES | 1 | View Images / Tech Appraisal | |
| 390-300-101-0 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 390.101.00 | S8173 WITH CUSTOMER STYLE BRKT | 1 | ||
| 3900-0101-0000 | Housing Motor | 1 | ||
| 3919010-101 | TEST BOX MULTI-FUNCTION | 1 | ||
| 3G6205G10651 900G1401010-101 | Pulling Attachment | 1 | ||
| 40-60 60101010 | RECOULES RВ 40-60 60101010 - 1 PC. | 1 | ||
| 40-85 60101020 | RECOULES RВ 40-85 60101020 - 1 PC | 1 | ||
| 401-010 | COCKPIT COVER | 1 | ||
| 40101010 | 14.10-10MM COMBINATION SPANNER LONG | 1 | ||
| 407-240-010-101 | Spanner (407-240-010-101) | 1 | ||
| 41101010 | 240.10MM-3/8"-RATCHET WRENCH 10mm-3/8" | 1 | ||
| 412-010-100-217 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 412-240-010-100 | BACKLASH TOOL (GEARBOX) | 1 | ||
| 412-240-010-101 | Backlash Tool (412-240-010-101) | 1 | ||
| 42010100 | 8.100-100MM STRIKING RING SPANNERS | 1 | ||
| 42010105 | 8.105-105MM STRIKING RING SPANNERS | 1 | ||
| 429-240-010-101 | TOOL SET | 1 | ||
| 429BF-2010-10 | WELDMENT | 1 | ||
| 430-240-010-101 | Adapter Assembly | 1 | ||
| 438-0010-100 | GYROMETER OPTICAL FIBER | 1 | ||
| 44006-06A-E17/44010-10A-E17 | HYDRAULIC PRESS/RETURN COUPLING KIT | 1 | ||
| 44010-10A-E17 | QUICK DISCONNECT COUPLING | 1 | ||
| 44010-10E-E17 | QUICK DISCONNECT COUPLING FOR ERJ 175/195 | 2 | ||
| 44010-10EN1 | SELF SEALING COUPLING ADAPTER | 1 | ||
| 45010100 | BRUSH RING FLAT COMPLETE | 1 | ||
| 4507-1000101-003 | JACK PAD, WING | 1 | ||
| 4507100101-001 | JACK PAD, WING | 1 | ||
| 4507100101-003 | ADAPTER ASSY, JACK-WING | 2 | ||
| 4507100101-005 | ADAPTOR ASSY, JACK, WING, W/TIE | 5 | ||
| 4507100101-007 | ADAPTER ASSY, JACK-WING | 4 | ||
| 5.41.7220.1010.00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 5.47.7220.1010.00 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 508285-001,010,011 AND012 | SWAGE TOOL SET | 1 | ||
| 51268-1701-0101 | TEST CABLE | 1 | ||
| 51268-1701-0102 | ADAPTER CABLE - FQIS TESTER INTERFACE CARD | 1 | ||
| 60002010-100 | MULTIMETER | 1 | ||
| 61006-001-010 | FLANGE SLEEVE | 1 | ||
| 62201-0100 | Custom Power Module Insertion Tool | 1 | ||
| 63001010 | CLUTCH INSPECTION FIXTURE1 | 1 | ||
| 64001-0100 | PremiumGrade™ Hand Crimp Tool | 1 | ||
| 651901-010 | SOFTWARE, DATA FILE, LOAD CONFIGURATION, EAFR - GE AVIATION | 1 | ||
| 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT | 1 | ||
| 7-662100101-001 | TOOL KIT, | 1 | ||
| 7010-10 | MAGNETIC STAND | 1 | ||
| 70101-08004-102 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 70101-08202-041 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 70418A010101 | BLEED MONITORING COMPUTER | 2 | ||
| 70BMA01010 | DIGITAL ENGINE CONTROL UNIT | 1 | ||
| 70BMD01010 | DIGITAL ENGINE CONTROL UNIT | 1 | ||
| 70BMK01010 | DIGITAL ENGINE CONTROL UNIT | 1 | ||
| 70BMP01010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | ||
| 70CMK01010 | ELECTRONIC CONTROL UNIT | 1 | ||
| 70QMA01010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | ||
| 70RMA01010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | ||
| 76700-20101-045 | WRENCH | 1 | ||
| 77000D24001010000 | GCU BOX | 1 | ||
| 77000D92001010011 | RAT KABEL | 1 | ||
| 77000D92001010012 | RAT KABEL | 1 | ||
| 77101010 | 13009-COTTER PIN PULLER | 1 | ||
| 79000D92001010011 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010012 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010013 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010014 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010015 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010017 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010018 | EXTENSION CABLE | 1 | ||
| 79000D92001010021 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010022 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010023 | BELLY FAIRING KABEL | 1 | ||
| 79000D92001010025 | HYDRAULIK KABEL | 1 | ||
| 79000D92001010026 | HYDRAULIK KABEL | 1 | ||
| 80000-03-01010203 | DATA LOADER | 1 | ||
| 801-010-02 | RSU11 TEST TOOL | 1 | ||
| 801-0103 | FLIGHT LINE COMPUTER | 1 | ||
| 801-0103-01 | Flight Line Computer | 1 | ||
| 801-0108-02 | TOOL | 1 | ||
| 8010101-12-12-12-720 | Hose assembly | 1 | ||
| 8010101-2-4-4-12 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 80101015 | ELECTROCLEANING 1010/4100 (1L) | 1 | ||
| 80101020 | SCM-4100 ELECTROCLEANING | 1 | ||
| 81159A010102 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 822-0101-002 | HF TRANCEIVER | 1 | ||
| 8242001010 | WOODEN CRATE ENGINE ARRIEL | 1 | ||
| 83400101-001-89 | ADAPTER (FOR ATC/XPDR BOTTOM ANTENNA) | 1 | ||
| 853-100-101-0 | DYNA 6 S SKIRT WRENCH | 1 | ||
| 8601-010 | PLATFORM - WORK, GENERAL PURPOSE. HEIGHT: 108-222 INCHES | 1 | ||
| 866Z301-0101L | THIS IS NOT A TOOL | Not Available | Not Available | |
| 89010100 | 13217 TA-TRANSPARENT COVER | 1 | ||
| 90080101-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 92087A010101 | TEST CONTROL BOX | 1 | ||
| 92520A010101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 92524A010101 | FAULT CONTROL BOX | 1 | ||
| 92627A010100 | FIELD TEST BOX | 1 | ||
| 93269A010101 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 93269A010102 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9401-01-0000-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 9561010100 | SIMRIT RING | 1 | ||
| 9601-010 | CRANE-PORTABLE FLOOR,1000 LBS | 1 | ||
| 96010107 | 40MA/25/8QR KN-1/4" QR SOCKET SET | 1 | ||
| 96501010 | 714R/10-T/WRENCH 10-100Nm WITH INSERT | 1 | ||
| 9700-1010 | TEST BOX GOODRICH | 1 | ||
| 9744010100 | CIRCLIP | 1 | ||
| 980-101-000-011 | TOOL | 2 | ||
| 98A10001010000 | COVER-BLANKING,AIR CONDITIONING FRESH AIR INTAKE | 2 | ||
| 98A27901010000 | PIN-RIGGING,THROTTLE CONTROL MICROSWITCH UNIT | 4 | ||
| 98A29001010000 | ADAPTER-HYDRAULIC TANK TOPPING UP UNIT | 1 | ||
| 98A29001010100 | BODY ASSEMBLY ADAPTO | 1 | ||
| 98A32201010000 | SAFETY PIN - NOSE GEAR DOORS | 3 | ||
| 98A32301010 | TOOL | 1 | ||
| 98A3230101000 | TOOL | 1 | ||
| 98A32301010000 | PIN-RIGGING,NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 9 | View Images / Tech Appraisal | |
| 98A32301010001 | PIN PLAIN | 1 | ||
| 98A32301010002 | RING | 1 | ||
| 98A57004010100 | BEAM FWD-RIB 6 | 1 | ||
| 98A57004010101 | BEAM AFT-RIB 6 | 1 | ||
| 98A57004010102 | BEAM FWD-RIB 13 | 1 | ||
| 98A57004010103 | BEAM AFT-RIB 13 | 1 | ||
| 98A57004010104 | BEAM FWD-RIB 17 | 1 | ||
| 98A57004010105 | BEAM AFT-RIB 17 | 1 | ||
| 98A57004010106 | BEAM-RIB 24 | 1 | ||
| 98A57004010107 | SPAR BLOCK FWD-RIB 6 | 1 | ||
| 98A57004010108 | SPAR BLOCK AFT-RIB 6 | 1 | ||
| 98A57004010109 | SPAR BLOCK FWD-RIB 13 | 1 | ||
| 98D27309001010 | TOOL ELEMENT NATURAL | 1 | ||
| 98D27504010100 | ADJUSTER KINK SEAL | 1 | ||
| 98D27504010101 | BOLT | 1 | ||
| 98D27504010102 | PIN | 1 | ||
| 98D27504010103 | PAD | 1 | ||
| 98D27504010104 | HOUSING | 1 | ||
| 98D27504010105 | BRACKET | 1 | ||
| 98D27504010106 | BRACKET | 1 | ||
| 98D71203010102 | CHAIN PULLY | 1 | ||
| 98D90101005000 | RIG PIN TOOL | 1 | ||
| 98F09101010000 | BAR - STEERING, NOSEWHEEL | 1 | ||
| 98F1201010000 | TOOL | 1 | ||
| 98F32201010 | TOOL | 1 | ||
| 98F32201010000 | BULLET SET-NLG DOOR PIN | 1 | ||
| 98F32201010200 | BOLT | 1 | ||
| 98F32301010 | TOOL | 1 | ||
| 98F32301010000 | RIGHT BEARING INSTALLATION GUIDE - CONE CLG | 1 | ||
| 98F32301010001 | RIGHT BEARING INSTALLATION GUIDE - CONE CLG | 1 | ||
| 98F71201010 | TOOL | 1 | ||
| 98F71201010000 | APPROACH DEVICE FITTING - ENGINE, PYLON | 14 | View Images / Tech Appraisal | |
| 98F71201010200 | WASHER | 1 | ||
| 98F71201010202 | WASHER | 1 | ||
| 98F80101001000 | Air Starter | 1 | ||
| 98L32201010 | TOOL | 1 | ||
| 98L32201010000 | NLG DOORS BULLETS | 1 | ||
| 98L53509010100 | WELDED ASSEMBLY | 1 | ||
| 98L53509010102 | WELDED ASSEMBLY | 1 | ||
| 98L53509010104 | WELDED ASSEMBLY | 1 | ||
| 98L7110H010-102 | BOLT | 1 | ||
| 98S57005001010 | Wing Panel Removal Kit | 4 | ||
| 98S57005001010-REVB | WING UPPER SURFACE PANEL REMOVAL KIT | 1 | ||
| 98S5705001010 | WING PANEL REMOVEL KIT | 1 | ||
| 98V32201010 | TOOL | 1 | ||
| 98V32201010000 | TOOL | 1 | ||
| 9990101021 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 99A28404001010 | ASSY OF HARNESSES | 1 | ||
| 99A32501010 | TOOL | 1 | ||
| 99A32501010000 | DEVICE-TESTING ADJUSTMENT,N.G. WHEEL STEERING CONT | 8 | View Images / Tech Appraisal | |
| 99A32501010102 | LIMIT STOP | 1 | ||
| 99A32501010104 | SUPPORT | 1 | ||
| 99A32501010107 | KNURLED THUMB SCREW | 1 | ||
| 99A32501010108 | KNURLED THUMB SCREW | 1 | ||
| 99A32501010109 | KNURLED THUMB SCREW | 1 | ||
| 99A32501010119 | INTERMEDIATE PLATE | 1 | ||
| A0101004 | COLLAR | 1 | ||
| A030010101-3 | ROD ASSY | 1 | ||
| A030010101-5 | ROD ASSY | 1 | ||
| A109BF-2010-10 | WELD ASSY | 1 | ||
| A1N901010 | SEAL | 2 | ||
| A21010-100 | Dust Cap | 1 | ||
| A21010-101 | Vacuum pump | 1 | ||
| A21010-102 | Muffler | 1 | ||
| A21010-103 | VACUUM TANK - PRESSURE RELIEF VALVE TESTER | 1 | ||
| A21010-104 | Breather Vent | 1 | ||
| A21010-105 | Breather Vent | 1 | ||
| A21010-106 | Street Elbow | 1 | ||
| A21010-107 | Pipe Thread Reducer | 1 | ||
| A21010-108 | Pipe Thread Reducer | 1 | ||
| A21010-109 | Ball Value | 1 | ||
| A310-10-10-00-0378 | COVER-CENTER PEDESTAL | 1 | ||
| A32010-10 | PULLER EQUIP | 1 | ||
| ABM2BG2SA001010 | CUSTOMIZATION MANAGEMENT TOOL (CMT) | 1 | ||
| AFT6355B0001-01-01 | BEARING PRESSING TOOL | 1 | ||
| AFT6355B0001-01-02 | BEARING PRESSING TOOL | 1 | ||
| AFT6355C0001-01-05 | HOLDING FIXTURE | 1 | ||
| AFT6355C0001-01-06 | PIN, SHIM ALIGNMENT, LONG | 1 | ||
| AFT6355C0001-01-07 | PIN, SHIM ALIGNMENT, LONG | 1 | ||
| AGE-01010 | TOOL | 1 | ||
| ARP-.60-1.0/100HZ | LOW FREQUENCY REFLECTION RING PROBE, 100HZ-3KHZ.600"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | ||
| AT010106 | LUMINOMETER | 1 | ||
| AT190-10-100 | VLV CSE ASY | 1 | ||
| ATP DB 2010-109 | UNIVERSAL SOCKET | 1 | ||
| AVSNP01010 | AVIATION TIN SNIPS-LEFT CUT | 1 | ||
| B01801E02010100 | TESTER-PROXIMITY SENSOR,DOOR | 1 | ||
| B201010T | BOLT ROTATION | 1 | ||
| B201010T-01 | BOLT ROTATION TOOL | 1 | ||
| B201010T-501 | C&D BOLT ROTATION TOOL | 6 | ||
| B2T-34-010-10 | GYRO LEVELING ASSY. | 1 | ||
| B32010-10 | THREAD PROTECTOR | 1 | ||
| B5T-52-001-01/03 | TOOL | 1 | ||
| B5T5200101-01 | DOOR HANDLE TOOL | 1 | ||
| B5T5200101-02 | DOOR HANDLE TOOL | 1 | ||
| B671M3010102 | PUSHING OUT TOOL | 1 | ||
| B711M3010101H123-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| B78010-10 | FUNCTIONAL TEST STAND | 1 | ||
| B901-010 | CANOPY COVER | 1 | ||
| BAH11101010 | 10 FLAT FILE CUT 1 | 1 | ||
| BAH11601010 | 10IN SQUARE FILE CUT 1 | 1 | ||
| BAH11701010 | 10IN 3 SQUARE FILE CUT 1 | 1 | ||
| BAH12101010 | FILE 210 HALF RD BSTD 10IN | 1 | ||
| BAH12301010 | FILE 230 ROUND BSTRDH 10IN | 1 | ||
| BAH41401010 | 10IN MILL SAW 2 ROUND EDGES | 1 | ||
| BAHGL010-10 | GL010 GLOVES SIZE 10 | 1 | ||
| BDL8101-01-0 | KIT FIXATION FRONT PLUG | 1 | ||
| C32010-10 | STRAP - RETENTION, NLG/MLG INNER CYLINDER | 1 | ||
| C49010-10 | Clamp hinge | 1 | ||
| C543901-01-01 | PIPE SUPPORT UPPER | 1 | ||
| C71010-10 | WRENCH | 1 | ||
| CE200401-0105 | CUNAS-CALIDAD- | 1 | ||
| CG9210101-0001 | KIT ECS LP OBSTUCTION TEST SET | 1 | ||
| CS-AGE-EQ101-0101 | BATERIA 1550A | 1 | ||
| CS-AGE-EQ101-0101-B | BATERIA 2100A | 1 | ||
| CT9010-100R | SERVICE HOUSING ASSY. RED | 1 | ||
| CT9010-103 | NOSE ASSEMBLY | 1 | ||
| CTINF9010-100R | REPAIR HOUSING SET | 1 | ||
| D067-484-01-010(star) | 1/2-13 300 SS | 1 | ||
| D622P0010101 | TOOL LEAD LAG DAMPER | 1 | ||
| D98BM010010100 | SLING - INLET COWL | 1 | ||
| D98BM020010100 | DOLLY - INLET COWL | 1 | ||
| D98BM030010100 | COVER - ENGINE AIR INTAKE | 1 | ||
| D98BM040010100 | COVER - VENTILATION SCOOP | 1 | ||
| D98BM050010100 | COVER-ANTI-ICE EXHAUST | 1 | ||
| DC400 (101-00800) DC400A (101-00850) WITH DC400A MODULE | DIGITAL DC FUEL QUANTITY TEST SET (BARFIELD INC.) | 1 | ||
| DO7010-10/1 | 2 WIRE KEAD, 3 PINS MALE PLUG. LARGE KELVIN CROCODILE CLIP | 1 | ||
| DPS1000/101-01175 | BARFIELD AIR DATA TEST SET, RVSM - REFURBISHED* | 1 | ||
| EAD_2013_010_100 | Fuel Wireless Maintenance System A (FWMSA) | 1 | ||
| ENCO01-CE201141M0101-0001 | Util grapado | 1 | ||
| F01-10-1-01-00108,5х82 | SHEAR BOLT FOR TOWBAR В757 | 1 | ||
| F73010-10 | WINDOW BASE | 1 | ||
| FB70010-100 | CFM56-5B ENGINE CRADLE | 1 | ||
| FB70010-100B | ENGINE CRADLE | 1 | ||
| FB70010-108 | PLAIN WASHER | 1 | ||
| FGFB907101010 | AIRCRAFT CRADLE | 1 | ||
| FGFB980001010 | TOOL FOR IMMOBILIZING THE ENGINE START SELECTOR | 1 | ||
| G1001010003-001 | L/H Pitot & Standby Pitot Cover Assy | 1 | ||
| G1001010004-001 | R/H Pitot & Tat Probe Cover Assy | 1 | ||
| G1001010006-027 | APU INTAKE COVER | 3 | ||
| G1001010007-001 | COVER, APU EXHAUST | 2 | ||
| G1001010008-001 | Tool | 1 | ||
| G1001010008-015 | Fuel Vent Blanking Plug | 1 | ||
| G1001010008-017 | Fuel Vent Blanking Plug | 1 | ||
| G1001010009-001 | Tailcone Vent Plug Assy | 1 | ||
| G1001010010-001 | Case Drain Guide Vane Cover Assy | 1 | ||
| G1001010017-001 | DOOR SUPPORT CABLE KIT | 4 | ||
| G1001010018-001 | COVER, ECS EXHAUST | 2 | ||
| G1001010019-001 | COVER, ECS INLET | 2 | ||
| G1001010035-001 | Engine Generator Cooling Duct Plug Assy | 1 | ||
| G25010-101 | SLIDING | 1 | ||
| G25010-102 | WEIGHT | 1 | ||
| G25010-103 | ARM | 1 | ||
| G25010-104 | PAD | 1 | ||
| G25010-105 | SMALL PAD | 1 | ||
| G600-101053-1 | COVER PROTECTIVE VHF | 2 | ||
| G600-101053-3 | Cover - Antenna Vhf | 1 | ||
| G600-101061-1 | PROTECTOR, ICE DETECT.PROB | 4 | ||
| G600-240010-101 | TOOL ADG NUT REMOVAL | 1 | ||
| G600−101054−1 | Cover − DME Antenna | 1 | ||
| G600−101056−1 | Cover − Antenna (Marker Beacon) | 1 | ||
| G600−101057−1 | Cover − VOR/LOC Antenna | 1 | ||
| GB832-010-100 | THIS IS NOT A TOOL | Not Available | Not Available | |
| Gedore-010100 | Gedore 010100 ADS4 - Dial Measuring Torque Wrench, Range : 0.8-4.0 N.m / 7-35 lbf.in | 1 | ||
| Gedore-010108 | Gedore 010108 ADS4S - Dial Measuring Torque Wrench, Range : 0.8-4.0 N.m / 7-35 lbf.in | 1 | ||
| GPT401-04-03-01-01-010-04-P | TOOL | 1 | ||
| GPT401-04-04-01-01-010-04-P | TOOL | 1 | ||
| HAY5701-0100 | BROOK CUTTING TOOL 8MM | 1 | ||
| HCS2036-01-010 | REAMERS - SOLID CARBIDE | 1 | ||
| HCS2036-01-010A | REAMERS - SOLID CARBIDE | 1 | ||
| HFL70010102 | VICE GRIP PLIER 40 04 180 | 1 | ||
| HKW010108 | NOSEPIECE | 1 | ||
| HP-6010-10 | LIFT LEG 10 IN | 1 | ||
| HP-6010-10.25 | LIFT LEG 10-1/4 INCH | 1 | ||
| HP-6010-10.5 | LIFT LEG | 1 | ||
| HY8101-010 | 10" QUICK-NUT SPRING DIVIDERS | 1 | ||
| HYSP04010100 | 1/2" IMPACT SET | 1 | ||
| J25010-10 | FRAME ASSY | 1 | ||
| J32010-106 | PULLER EQUIPMENT - WHEEL AND BRAKE SLEEVES, MAIN LANDING GEAR (MLG) AXLES (CE) | 7 | ||
| J32010-107 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR AXLES (CE) | 4 | ||
| K20010-10 | HOIST WEB SLING | 1 | ||
| K27010-104 | REMOVE/INSTALL EQUIPMENT - HIGH LIFT HYDRAULIC CONTROL UNIT (CE) | 4 | ||
| K52010-10 | FOUR-PRONG KNOB | 1 | ||
| K71010-10 | TOW BAR ASSY | 1 | ||
| LIN5010100N | MICROMETER 75-100MM | 1 | ||
| LIN59010100 | 1000MM STRAIGHT EDGE | 1 | ||
| LJ30P190400101-001 | TRACK D LOCATING TOOL | 1 | ||
| LJ30P190400101-002 | TRACK D LOCATING TOOL | 1 | ||
| LYD850/1010 | 13/16OD 3/16 DIE | 1 | ||
| M22520/10-100 | X DIE SET - .136 CONFINED CRESCENT FOR 12-10 AWG MS3316 INSULATED TERMINALS | 1 | ||
| M22520/10-101 X511 | X511 DIE SET | 1 | ||
| M22520/10-104 X528 | X528 DIE SET | 1 | ||
| M30010-1026 | BRUSH | 2 | ||
| M324U3010101 | Standard Landing Gear Wheel Replacement Device | 1 | ||
| M632V3010101 | Hydraulic Pump Seal Exchange | 1 | ||
| M672V4010103 | TRB Angle Measurement Kit | 1 | ||
| MA-5240-10-10 | PALLET NET ALUMINIUN | 1 | ||
| MHH-010100 | DIAL TORQUE WRENCH | 1 | ||
| MODEL P701010R | FLOW METER | 1 | ||
| MSL4201010 | 1/4IN GASKET 10PK | 1 | ||
| MSL42010100 | GASKET FOR HOST NUT R12 | 1 | ||
| MSL8201010 | 10PK GASKET FOR HOST NUT R134A | 1 | ||
| MT4066010-104 | TCAS PC TEST SOFTWARE | 1 | ||
| MTOO10-101000200: APU002B-46,96(+0,05)-1X30-30,1(+0,1)-30 | Montaje de juntas por chaflan y diámetro exterior | 1 | ||
| MTOOXX-CE101001-0103 | Empujador+ proteccion | 1 | ||
| NDTE04-0101-04 | SCRATCHVIEW MEASURING DEVICE | 1 | ||
| NET-615-R01-010 | ARINC 615A-2 ETHERNET DATALOADER | 1 | ||
| OSTFP4104-NAS5101010 | SWAGGING TOOL | 1 | ||
| P601-010 | CANOPY COVER (windows only) | 1 | ||
| PN:10-210101-005 | THIS IS NOT A TOOL | Not Available | Not Available | |
| PR00-01-35-00101-00 | POWER SUPPLY FOR CONTINUITY TESTS | 1 | ||
| PWA101010 | BLADE MASTER_[PWA101010] | 1 | ||
| R-D622P0010101 | TOOL LEAD LAG DAMPER | 1 | ||
| RB900G1401010-101 | COVER POWER TURBINE SUPPORT | 1 | ||
| RBEM324U3010101 | Standard Landing Gear Wheel Replacement Device | 2 | ||
| RBEM632V3010101 | Hydraulic Pump Seal Exchange | 2 | ||
| RBEM672V4010103 | TRB Angle Measurement Kit | 2 | ||
| RBW109-3110-10-101 | Swashplate Positioning Tool | 1 | ||
| S5741212501010 | THIS IS NOT A TOOL | Not Available | Not Available | |
| SIADAPAT-0101-00 | SEAT RAIL ADAPTER | 1 | ||
| SKW-010106 | NOSEPIECE | 1 | ||
| SLS-IN718-201-010793B2 | BOEING REFERENCE STANDARD, 0.030 x 0.030 x .005" +/- 002" CORNER EDM NOTCH. MATERIAL: 718 INCONEL | 1 | ||
| ST01-01-00 | SPHERICAL SUPPORT F 3/4" | 1 | ||
| ST918A-500-1010 | TOOL | 1 | ||
| STW01010032 | 1/4" x 3.2MM HEX SOCKET 6PT | 1 | ||
| SWE 22010-10 | TOOL | 1 | ||
| T-24-01-010 | TIRE FOR PIT BOX | 1 | ||
| TE519-2801-01-010 | TOOL | 1 | ||
| TESP02-92250-12280-101-00 | 1 | |||
| TF10101000 | TEST FIXTURE | 1 | ||
| THM-AS01-01-00 | TOOL | 1 | ||
| TL010100 | ADS4 TORQUE WR. 0.5-8.5NM | 1 | ||
| TMH BF01-01-03 | FILTER ADAPTOR | 1 | ||
| TMH CP01-01-06 | JOINT N¡3 | 1 | ||
| TMH CP01-01-07 | JOINT N¡2 | 1 | ||
| TMH CP01-01-08 | JOINT N¡1 | 1 | ||
| TMH ST01-01-00 | SPHERICAL SUPPORT | 1 | ||
| TMHAS01-01-00 | FUSELAGE STAY | 4 | View Images / Tech Appraisal | |
| TMHBF01-01-02 | ADAPTOR | 2 | ||
| URSR010103NT | POLYURETHANE CLR ROD 30FT | 1 | ||
| VL2-010-10-8V | 1 TON CHAIN HOIST | 1 | ||
| VR00173-01-0104 | FLY WHEEL LOCKING TOOL | 1 | ||
| WS0101-002 | OXYGEN REGULATOR | 1 | ||
| WS0101-025 | OXY/ACET REGULATOR | 1 | ||
| WS7201010000 | FLYWHEEL AB510 | 1 | ||
| X632P6010101 | TRANSPORTATION CONTAINER BOX FOR | 1 | ||
| Z601-010 | CANOPY COVER, 650 model | 1 | ||
| Z701-010 | EXTENDED CANOPY COVER (Over-The-Top Style) | 1 | ||
| Z801-010 | EXTENDED CANOPY COVER (Over-The-Top Style) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
