| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0100.00 | Axle Jack Hand Carry 10t | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| G600-1000001-11 | COVER | 1 | ||
| (CALIB) 150-10000-1 | CURLIN-AIR (CALIBRATION) | 1 | ||
| (CALIB) 860135970100000 | TESTSET TEST SET - APU FIRE EXTINGUISHI (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 97000D23401000020 | ESSAI LIAISON RADIO INTERPHONE MICRO | 1 | ||
| (CALIB) 97000F275.01000.000 | ASSERVISSEMENT BEC & VOLETS A330 / A340 | 1 | ||
| (CALIB) 97F52001000020 | CHECK TOOL PROXIMITY SENSOR | 1 | ||
| (CALIB) 97l27901000000 | ASC CDV A380 | 1 | ||
| (CALIB) 98A20003010000 | CRIMPING MACHINE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A27801000000 | EQUIPMT EQUIPMENT -REMOVAL INSTALLATIO (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A32101000000 | HANDLING TROLLEY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A53003010000 | RULE MEASURING RULE-ONBOARD ROD CENT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A53601000000 | SLING R/I,RADOME (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A54603010000 | TRANSFER TRANSFER TOOL-SPIGOT FITTING HO (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57004010000 | Wing Cradle set (A300) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27309010000 | Reaming tool, set (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32104010000 | BRACKET INTERFACE BRACKET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53103010000 | REMINST REMOVAL, INSTALLATION TOOL - RE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D71203010000 | BOOTSTRAP SYSTEM FOR LEAP-1A (CALIBRATION) | 2 | ||
| (CALIB) 98D71203010000_RtSt | BOOTSTRAP SYSTEM CFM (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F10201000000 | MOORING KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F10201000002 | MOORING KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F27801000002 | SLATPCU SLAT PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32101000000 | TOOL TOOL R I-MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32101000002 | TOOL TOOL R I-MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32201000000 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32201000001 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32201000002 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32301000000 | TOOL TOOL-R I CLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32301000001 | TOOL TOOL-R I CLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F53101000000 | SLING RADOME (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F54003010000 | GEAR GEAR - HOISTING PYLON (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F54503010000 | REBORING REBORING TOOL - WING AND PYLON (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F57103010000 | TOOL TOOL, SB57-5010 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F71201000021 | BOOTSTRP BOOTSTRAP SYSTEM,CFMI (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F71201000021_RtSt | BOOTSTRP BOOTSTRAP SYSTEM,CFMI (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L07101000000 | ADAPTOR ADAPTOR-JACK NOSE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L10201000000 | MOORING MOORING,KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27209010000 | ADAPTER ADAPTER-TURN BARREL, LOWER RUDD (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27301000000 | TOOL TOOL-ELEVATOR NEUTRAL ADJUSTMEN (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27601000000 | TOOL SHIM-SETTING,SPOILER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32001000000 | FILLING FILLING KIT-GEAR SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32101000000 | DEVICE DEVICE,REMOVAL INSTALLATION-DRA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32101000001 | R/I TOOL DRAG STAY BLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32201000000 | WINCH WINCH-R I NLG LEG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32201000001 | R/I NLG LEG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L54001000000 | WRENCH SET, PYLON INSTAL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L57104010000 | WATER DRAIN KIT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S27003010000 | GUARD SAFETY FLAP CONTROL | 1 | ||
| (CALIB) 98S27305010000 | PUM DRILLING ADJUSTMENT TOOL | 1 | ||
| (CALIB) 98S53005010000 | LOWER SIDE PANELS BTWN FR 23&29 | 1 | ||
| (CALIB) 98V07101000000 | JACKING-NOSE FITTING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V10201000000 | MOORING KIT NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V32104010000 | SETTING TOOL - UPLOCK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V32201000000 | R/I TOOL - NLG LEG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V32204010000 | CABLE, GDO (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V53509010000 | BH PLATFORM S19 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V55109010000 | TOOL SET - R/I THSA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V57004010000 | A350-900 CRADLE SET WING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99A32501010000 | DEVICE - TESTING ADJUSTMENT, N.G. (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) CG9000100-0001 | KIT, DRILLING TOOLS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T1351960100000 | RAM Air Turbine Test (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792995001000000H | Angle measuring device set (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792999401000000H | UNIVERSAL LIFTING BEAM 1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) TMHAS01-00-00 | PETIT TRIPODE COMPLET | 1 | ||
| (CALIB) TMHNA01-00-00 | NLG JACK ADAPTER | 1 | ||
| 00127-010-000 | PRESSURE GAUGE | 1 | ||
| 00196-010-000 | WARNING STREAMER | 1 | ||
| 001U285A0100000 | ADAPTER | 1 | ||
| 00465-010-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 00471-010-000 | BUBBLE LEVEL | 1 | ||
| 00513-010-000 | SPACER | 1 | ||
| 006-18301-0000 | MST 67A | 1 | ||
| 00610100000 | POLARIZATION KEY EXTRACTION TOOL | 4 | ||
| 01-0601-0000 | TOWBAR HEAD | 3 | ||
| 01-0701-0000 | Multi-Hd, Airba321/320/319/318 | 3 | ||
| 01-1101-0000 | TOWBAR: CUSTOM,CITATION, DROP SHIP ONLY | 2 | ||
| 01-1201-0000 | TOWBAR MULTI HEAD | 2 | ||
| 01-1201-0000-10 | TOWBAROPT, | 1 | ||
| 01-1201-0000A2 | TOWBAR, | 1 | ||
| 01-1201-0000A3 | TOWBAR, | 1 | ||
| 01-1201-0000A4 | TOW BAR, | 1 | ||
| 01-1301-0000 | Towbar, Custom A340-600 | 2 | ||
| 01-2001-0000 | Towbar, Eclipse 500 Vlj | 1 | ||
| 01-8001-0000 | TOWBAR, | 1 | ||
| 010-01000-00 | LOADER CARD | 1 | ||
| 010000335 | "PGS DISCOVERY REPLAY SOFTWARE | 1 | ||
| 010000383 | PGS DISCOVERY REPLAY SOFTWARE | 1 | ||
| 010000409 | PGS DISCOVERY V5.6.0 | 1 | ||
| 010000410 | PGS VISION V5.6.0 | 1 | ||
| 010000428 | PSG VISION DOWNLOAD AND REPLAY SOFTWARE | 1 | ||
| 0180-3010-000 | REMOVAL TOOL | 3 | ||
| 01801000000 | TURN OUT TOOL | 1 | ||
| 01803010000/10 | REMOVAL TOOL | 1 | ||
| 02565800100000 | SUITCASE ASSY - FLIGHT KIT II | 1 | ||
| 03-5801-0000 | STAB STAND, | 1 | ||
| 0330.01.0000.00 | EUROCOPTER AS-350/AS355/AS365 Tail Jack | 1 | ||
| 04100010000 | SPRING BALANCER 5KG x 25G | 1 | ||
| 050-1000-06C31-B | Socket - Tire Pressure Sensor,SmartStem | 5 | ||
| 054-0601-0000-99-384 | GAUGE TYRE PRESSURE | 1 | ||
| 071-06010-0000 | SPLINE ADAPTER | 3 | ||
| 071-6010-0000 | SPLINED ADAPTER | 1 | ||
| 073687010000000 | EXTENDER BOARD | 1 | ||
| 073692010000000 | TEST FIXTURE | 1 | ||
| 08-2001-0000 | STAND, ENGINE UNIVERSAL | 5 | ||
| 08-91-1-01-00-0010 | CONNECTOR BLOCK+HANDLE | 1 | ||
| 08010000 | 1220-1/4 PHILLIPS BITS PH0 | 1 | ||
| 0S51501-0000 | RIVETING FIXTURE | 1 | ||
| 100-3010-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1000-1000-00 | L3HARRIS LDR 1000 | 1 | ||
| 101-000000/934 | TORQUE SYSTEM CALIBRATION | 3 | ||
| 101-00001 | BARFIELD 2656G ALTITUDE ENCODER TEST SET | 1 | ||
| 1010000A-1 | CART SERVICE COOLANT | 2 | ||
| 1010000A-2 | CSC,ELECT,MODEL 1010A | 1 | ||
| 106-0100-002 | TESTER, SPRING RESILIENCY | 1 | ||
| 120760100001 | PROTECTIVE BOX | 1 | ||
| 121860100001 | PROTECTIVE BOX | 1 | ||
| 122660100001 | PROTECTIVE BOX | 1 | ||
| 122960100001 | PROTECTIVE BOX | 1 | ||
| 123760100001 | PROTECTIVE BOX | 1 | ||
| 1265A010000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 13-01-00-00P009-L01 | SPRD. REAR COV. | 1 | ||
| 1301000001 | HY-LITE 2 LUMINOMETER | 2 | ||
| 133-820100-0003/918 | FRICTION COLLAR HAND TOOL. | 1 | ||
| 137W00-100-00 | FRONT ATTACHEMENT ADAPTER | 1 | ||
| 150-10000-1 | INSTRUMENT | 1 | ||
| 153010-000007 | 1090 MHz Transponder ADS-B Out, WAAS GPS | 1 | ||
| 16.10PCB01000030 | CHAIN HOIST | 1 | ||
| 1792-01-0000-10 | PIN: SHEAR,TOWBAR,ST, | 1 | ||
| 1792-01-0000-11 | PIN: SHEAR,TOWBAR,N1, | 1 | ||
| 18001-00-00Z000 | PLATFORM (TOOL FOR SAFRAN SEATS) | 1 | ||
| 1803010000 | Extraction tool | 2 | ||
| 18903010000 | SHAFT ADAPTER | 1 | ||
| 18906010000 | PRECISION PRESSURE ALTITUDE CONTROLLER | 1 | ||
| 18960100000 | VACUUM CHAMBER | 1 | ||
| 19-4301-0000 | POTABLE WATER | 8 | ||
| 19010000 | 4150-1/4" SPARE PARTS FOR RATCHETS | 1 | ||
| 20-1000-01B160 | GAGE,PRESSURE,DIAL 0-160PSI | 1 | ||
| 200951ATMHNA010000/D228270 | ADAPTER NG LIFT SV | 1 | ||
| 201-00007 | CLIP: HEAT DISSIPATOR,REV A, | 2 | ||
| 212-10-10-0100-000 | RUDDER GUST LOCK | 1 | ||
| 212-92010-0001 | Kit herramientas tren principal | 1 | ||
| 23-01-00-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 24A57840001000001 | ADJUSTMENT TOOL SET SLAT | 1 | ||
| 260P-05-1-0-1-00-0-0-B | 2-GALLON SKYDROLHYJET DISPENSER MODEL 260 | 1 | ||
| 28.007.182.01.0.000 | Power supply cable | 1 | ||
| 291-101-000-011 | TEST SYSTEM | 1 | ||
| 291-101-000-021 | TEST SYSTEM | 1 | ||
| 291-101-000-031 | VIBROMETER | 1 | ||
| 2T-A-1010-0100-00 | ENGINE AIR INTAKE COVERS | 1 | ||
| 2X2,34_0/10000PSI | GAUGE "WIKA" 2X2.34 | 1 | ||
| 301-00001 | GUARD: COVER,TOP,AL, | 2 | ||
| 301-00002 | GUARD: INNER,AL, | 2 | ||
| 319900100000 | SPECIAL TOOL | 1 | ||
| 341A91-0100-00 | LEVELING JACK (REAR) | 1 | ||
| 35M5M01010000 | TEST SET-THS TRAVEL LIMIT SWITCHES | 1 | View Images / Tech Appraisal | |
| 368A32010000-A-6810 | Bati de montage BTP | 1 | ||
| 3732A010000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 37M840-1000-001 | TEST BENCH | 1 | ||
| 37M890-1000-000 | TEST BENCH | 1 | ||
| 37M8901000001 | TEST BENCH | 1 | ||
| 37M940-1000-001 | TEST BENCH | 1 | ||
| 38-32-00-100-001 | WASTE WATER DRAIN PLUG TOOL | 1 | ||
| 3900-0101-0000 | Housing Motor | 1 | ||
| 3901-0000-0008 | Cap | 1 | ||
| 401-0000-050 | MH COM SOFTWARE | 1 | ||
| 401-0000-070 | MH COM SOFTWARE | 1 | ||
| 450001000000 | HYDRAULIC UNIT | 1 | ||
| 450100100-003 | NOSE JACK PAD | 1 | ||
| 4507100100-003 | NOSE JACK ADAPTER | 1 | ||
| 4507100100-005 | NOSE JACK ADAPTER | 1 | ||
| 47900010000 | SPRING BALANCE 25KG x 200G | 1 | ||
| 491B1200100-009 | TUBE ASSY | 3 | ||
| 4933307-01-0000 | REGULATOR HIGHT PRESSURE , 0-2500 PSI. MANUFACTURE CONCOA | 1 | ||
| 4S55101-0000 | PISTON FITTING TOOL | 1 | ||
| 50100001 | 755R/1-MANOSKOP T/WRENCH 1.5-12.5Nm | 1 | ||
| 5010D930100000 | TOOL | 1 | ||
| 526-124 7,00-10,00 0,001 | MITUTOYO | 1 | ||
| 5L0012000100000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 60010000 | 153-METAL PIPE CUTTERS | 1 | ||
| 6005-101-00-00 | WHEEL CHANGE TRAILER- BASE UNIT | 1 | ||
| 6005-301-00-00 | WHEEL CHANGE DOLLY | 1 | ||
| 610100000 | TOOL MODULE EXTRACTION | 1 | ||
| 61040-01-00-004 | TOOL | 1 | ||
| 61041-01-00-000 | TOOL | 1 | ||
| 61041-01-00-001 | TOOL | 1 | ||
| 61041-01-00-002 | TOOL | 1 | ||
| 61041-01-00-007 | TOOL | 1 | ||
| 61042-01-00-002 | TOOL | 1 | ||
| 61042-01-00-007 | TOOL | 1 | ||
| 61045-01-00-009 | TOOL | 1 | ||
| 61049-01-00-001 | TOOL | 1 | ||
| 61051-01-00-004 | TOOL | 1 | ||
| 61051-01-00-008 | TOOL | 1 | ||
| 61051-01-00-009 | TOOL | 1 | ||
| 61052-01-00-002 | TOOL | 1 | ||
| 61052-01-00-004 | TOOL | 1 | ||
| 61052-01-00-008 | TOOL | 1 | ||
| 61055-01-00-001 | TOOL | 1 | ||
| 61078-01-00-001 | TOOL | 1 | ||
| 61141-01-00-003 | TOOL | 1 | ||
| 61142-01-00-003 | TOOL | 1 | ||
| 61145-01-00-002 | TOOL | 1 | ||
| 61145-01-00-004 | TOOL | 1 | ||
| 61146-01-00-002 | TOOL | 1 | ||
| 620A010000-00 | TOOL | 1 | ||
| 62902-FE392010000 | A320 PEDALS MODIFIED ASSEMBLY PIN | 1 | ||
| 66001-001-0000 | MLG SLEEVE AFT GSE403 FWD 170/190 | 1 | ||
| 6740F010000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 6743A010000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 6764C010000 | VALVE | 1 | ||
| 6774G010000 | VALVE-BLEED | 1 | ||
| 68-05-350-33-01-00-00 | Adapter | 1 | ||
| 6817_368A32010000 | Interface tournante | 1 | ||
| 6912D11-0100-00 | PLEXIGLASS SCRAPER | 1 | ||
| 6912D11-0100-00/PHP | PLEXIGLASS SCRAPER | 1 | ||
| 701-00006-016 | BEARING | 1 | ||
| 70216-01000-041 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 70216-01000-042 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 77000D21101000000 | 14/15 HRG PHASE | 1 | ||
| 77000D21201000000 | CARGO FIRE | 1 | ||
| 77000D21301000000 | SAFETY VALVE SYM | 1 | ||
| 77000D21601000000 | AVIONIC VENTILATION | 1 | ||
| 77000D22801000000 | KABEL BUS BARS SPLIT | 1 | ||
| 77000D24001000020 | GALLEY FEEDER | 1 | ||
| 77000D24001010000 | GCU BOX | 1 | ||
| 77000D24201000000 | PMG ISOLATION | 1 | ||
| 77000D25401000000 | BELASTUNG RASIERST | 1 | ||
| 77000D26101000000 | APU FIRE DETECTION | 1 | ||
| 77000D27001000010 | SICOVOL | 1 | ||
| 77000D27001000020 | SICOVOL | 1 | ||
| 77000D27001000030 | SICOVOL | 1 | ||
| 77000D27201000000 | PEDALS LOAD TEST SET | 1 | ||
| 77000D28201000000 | DUMMY FUEL PUMPS | 1 | ||
| 77000D34301000000 | FMGC DUMMY | 1 | ||
| 77000D35101000000 | OXY CREW TESTER | 1 | ||
| 77000D38101000000 | 2MA4MA RELAY | 1 | ||
| 77000D49001000020 | APU KABEL | 1 | ||
| 77000D73201000010 | PYLON KABEL | 1 | ||
| 77000D73201000011 | PYLON KABEL | 1 | ||
| 780-1000-001 | P/N 780-1000-001 IS A TRULINK PORTABLE TRANSCEIVER | 1 | ||
| 780-1000-001-CF0095-M25 | CONTROL,INTERCOMMUNICATION SET | 1 | ||
| 780-1000-001-CF0095-M28 | TRULINK TRANSCEIVER | 1 | ||
| 780-1000-001-CF0095-M5 | TRULINK PORTABLE TRANSCEIVER (TPT) - AIR FORCE C-1 | 1 | ||
| 780-1000-001-CF0095-M8 | TRULINK PORTABLE TRANSCEIVER (TPT)-AIR | 1 | ||
| 780-1000-003 | ADAPTER POWER (TELEPHONICS CORPORATION) | 1 | ||
| 79000D92001000 080 | ADIRS KABEL (SET) | 1 | ||
| 80-100-0073 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 8010-00-082-2450 | EPOXY PRIMER COATING | 1 | ||
| 8010000 | 1/4 PHILLIPS BITS PH0 | 1 | ||
| 8153-01-0000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 82701-00000 | CLEAR POLYCARBONATE FACESHIELD WP96 | 1 | ||
| 860135950100000 | SIMULATOR - ENGINE OIL LOW PRESSURE | 1 | ||
| 860135970100000 | TEST SET - APU FIRE EXTINGUISHING SYSTEM | 2 | ||
| 86013597010000000 | TOOL | 1 | ||
| 8815 010 000/PHP | SUPPORT TOOL FOR LINKING TUBE | 1 | ||
| 8815010000 | MAINTAINING TOOL | 2 | ||
| 8816701000.00 | INTAKE BLANK | 1 | ||
| 8819010000 | POSITIONING POOL | 1 | ||
| 88500053132010000 | FADOME SHELL REPLACEMENT TOOL | 1 | ||
| 88500D53132010000 | RADOME SHELL REPLACEMENT TOOL | 2 | ||
| 88500D53132010000MBGV | TOOL | 1 | ||
| 88510D53132010000 | TOOL | 1 | ||
| 890-100-00 | NITROGEN HP WALK AROUND KIT | 1 | ||
| 9001-000001 | AC PORTABLE WATER DESINFECTION SYSTEM 110V | 1 | ||
| 9001-000002 | AC POTABLE WATER DISINFECTION SYSTEM 220V | 1 | ||
| 9001-000022 | TOOL | 1 | ||
| 9001000010 | OZONE CART DISINFECTION SYSTEM | 1 | ||
| 900100002 | OZOFN WATER STERILISATION CART | 1 | ||
| 90020100-001 | BATTERY | 1 | ||
| 9008000-10000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 90080100-001 | TEST SET | 2 | ||
| 9172-03010000-000-000 | Vormontage Grundrahmen Umbau Rackwender | 1 | ||
| 91V63-0-10000PSI-1/4NPTBTM | GAUGE PRESSURE 0-10,000 PSI 63 MM FACE 1 - MFG: IFG DE WIT BV | 1 | ||
| 92008A010000 | POSITION INDICATION BOX | 1 | ||
| 9201-000002 | HOSE ASSY | 1 | ||
| 9201-000005 | OVERFLOW HOSE | 1 | ||
| 9201-000016 | 1" OVERFLOW FITTING | 1 | ||
| 9201000010 | KIT: TEST,OZONE, | 1 | ||
| 92210A010000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 92531A010000 | FAULT TEXT BENCH | 1 | ||
| 92549A010000 | SPECIAL TOOL | 1 | ||
| 92599A010000 | HEATING TEST BOX | 1 | ||
| 92600A010000 | AIR CONDITIONING TEST BOX | 1 | ||
| 92612A010000 | HEATING BREAK OUT BOX | 1 | ||
| 92613A010000 | AIR CONDITIONING BREAK OUT BOX | 1 | ||
| 92618A010000 | TEST BENCH | 1 | ||
| 92623A010000 | ECS TEST BOX 703A977200.00 | 1 | ||
| 930 - 1000 - 001 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 934-101-000-011 | VIBROMETER | 1 | ||
| 9401-01-0000-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 95-92010-0001 | Tow Cable Set | 1 | ||
| 9550L24010000000 | TOOL | 1 | ||
| 9602-01-0000-01 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 97000F12001000000 (elec) | Scissor lift 8 m Electrical | 1 | ||
| 97000F34101000000 | ANEMOMETRIC BENCH NAV | 1 | ||
| 97A27302010000 | MEASURING EQUIPMENT -PITCH TRIM CONTROL OPERATING LOAD | 2 | ||
| 97F08001000000 | MEASUREMENT TARGET | 1 | ||
| 97F2001000020 | PROXIMITY SENSOR TEST SET | 1 | ||
| 97F20010000200 | PROXIMITY SENSOR TEST SET | 1 | ||
| 97F52001000000 | TOOL | 1 | ||
| 97F52001000020 | TOOL | 2 | ||
| 97F52001000020-CAL | Calibration - Test Set Proximity Sensor | 1 | ||
| 97F52001000020-REP | Repair - Test Set Proximity Sensor | 1 | ||
| 97F52001000042 | CABLE LOOM | 1 | ||
| 97F52001000046 | CHECK TOOL PROXIMITY SENSOR EQUIPPED BOX | 1 | ||
| 97L71201000001 | TOOL | 1 | ||
| 97V10001000000 | CHOCK-MLG, ENGINE RUN UP | 1 | ||
| 97V27601000000 | TOOL | 1 | ||
| 97V52301000000 | REAR CARGO DOOR OPEN/CLOSE SAFETY TOOL | 1 | ||
| 980-101-000-011 | TOOL | 2 | ||
| 98000F09101000000 | Towbar | 1 | ||
| 98000F53301000000 | WRENCH SMALL NUT | 1 | ||
| 984-101-000-011 | VIBROMETER | 1 | ||
| 98507008010000 | FWD JACK ADAPTOR | 1 | ||
| 98807008010000 | FWD FUSELAGE JACK ADAPTER | 1 | ||
| 98827003010000 | FLAP CTL HNDL SAFETY CLAMP | 1 | ||
| 98A09001000000 | BAR-TOWING SUPSD BY STANDARD TOWBAR | 1 | ||
| 98A10001000000 | COVER,BLANKING-PRE-COOLER AIR OUTLET | 3 | ||
| 98A10001010000 | COVER-BLANKING,AIR CONDITIONING FRESH AIR INTAKE | 2 | ||
| 98A10003010000 | COVERS,PRE-COOLER | 1 | ||
| 98A12003010000 | HEATER-ELECTRICAL FLIGHT COMPARTMENT | 1 | ||
| 98A20003010000 | TOOL SET-REMOVAL INSTALLATION-NSA8132-8136 | 1 | ||
| 98A21001000000 | R/I EQUIPMENT-REFRIGERATION UNIT | 2 | ||
| 98A26201000000 | EQUIPMENT-R/I,ENGINE FIRE EXTINGUISHER | 8 | View Images / Tech Appraisal | |
| 98A26201000015 | HOOK | 1 | ||
| 98A27302010000 | MEASURING EQUIPMENT PITCH TRIM CTL WHEEL | 1 | ||
| 98A27309010000 | PIN, RIGGING, ELEVATOR CONTROL BELLCRANKS | 2 | ||
| 98A27408010000 | SOCKET | 1 | ||
| 98A2750100000 | I/R EQUIP FLAP CONTROL UNIT | 1 | ||
| 98A27501000000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 1 | ||
| 98A27508010000 | OVERSIZE ECCENTRIC PIN - FLAP CARRIAGE 2 | 3 | View Images / Tech Appraisal | |
| 98A27601000000 | SAFETY COLLAR - SPOILER SERVO CONTROL | 6 | View Images / Tech Appraisal | |
| 98A27603010000 | RIGGING PIN | 2 | View Images / Tech Appraisal | |
| 98A27608010000 | GUIDE BULLET - SPOILER/SPEED BRAKE ACTUATOR | 6 | ||
| 98A2780100000 | TOOL | 1 | ||
| 98A27801000000 | EQUIPMENT -REMOVAL INSTALLATION,SLAT CONTROL UNIT | 2 | ||
| 98A27901000000 | PIN-RIGGING,AILERON CONTROL WHEEL | 14 | View Images / Tech Appraisal | |
| 98A27901000001 | PIN RIGGING | 1 | ||
| 98A27901000002 | TOOL | 1 | ||
| 98A27901010000 | PIN-RIGGING,THROTTLE CONTROL MICROSWITCH UNIT | 4 | ||
| 98A2810100000 | DRAIN MAST | 1 | ||
| 98A28101000000 | ADAPTING PIPE - WATER DRAINING FROM FUEL | 26 | ||
| 98A28101000001 | EXTENTION FOR WATER DRAIN PURGER | 1 | ||
| 98A28101000006 | PIN | 1 | ||
| 98A28104010000 | BLANK ASSEMBLY | 1 | ||
| 98A281080010000 | ADAP ADD CENT TANK | 1 | ||
| 98A28109010000 | PROTECTIVE RING - STABILIZER MANHOLES | 3 | ||
| 98A29001010000 | ADAPTER-HYDRAULIC TANK TOPPING UP UNIT | 1 | ||
| 98A29201000000 | PIN-RIGGING,RAM AIR TURBINE DROP-OUT CONTROLS | 9 | ||
| 98A32101000000 | TROLLEY-GROUND HANDLING,MAIN LANDING GEAR FOR A300 310 | 4 | ||
| 98A32201010000 | SAFETY PIN - NOSE GEAR DOORS | 3 | ||
| 98A3230100000 | TOOL | 1 | ||
| 98A32301000000 | RIGGING PIN | 32 | ||
| 98A32301000000-REVC | RIGGING PIN | 1 | ||
| 98A32301000000300.00 | RIG PIN - LDG | 1 | ||
| 98A323010000007 | RIGGING PIN | 1 | ||
| 98A32301000001 | TOOL | 1 | ||
| 98A32301000003 | TOOL | 1 | ||
| 98A32301000007 | RIGGING PIN | 1 | ||
| 98A32301010000 | PIN-RIGGING,NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 9 | ||
| 98A32401000000 | PIN-RIGGING,BRAKING CONTROL | 5 | ||
| 98A32401000001 | PIN PLAIN | 1 | ||
| 98A32501000000 | RIGGING PIN-STEERING CONTROL | 1 | ||
| 98A3401000000 | RIG PIN.BRAKE. | 1 | ||
| 98A49010000000 | RIG PIN TOOL | 1 | ||
| 98A49601000000 | PIN,RIGGING-RAT CONTROL | 4 | ||
| 98A49601000001 | PIN,RIGGING-RAT CONTROL | 1 | ||
| 98A49601000002 | PIN,RIGGING-RAT CONTROL | 1 | ||
| 98A52108010000 | BALLAST | 1 | ||
| 98A52301000000 | COLLAR | 2 | ||
| 98A52308010000 | SOCKET WRENCH - UDC DOOR ACTUATOR | 4 | ||
| 98A53003010000 | MEASURING RULE-ONBOARD ROD CENTER-TO-CENTER DISTANCE | 1 | ||
| 98A53601000000 | SLING-R/I,RADOME | 2 | View Images / Tech Appraisal | |
| 98A53601000001 | HANDLING EQUIPMENT RADOME ASSY | 1 | ||
| 98A53601000002 | COVER-PROTECTIVE | 1 | ||
| 98A53601000003 | STRAP-FRONT | 1 | ||
| 98A53601000004 | STRAP-REAR | 1 | ||
| 98A53601000005 | STRAP-SIDE | 1 | ||
| 98A53601000007 | RING-HOSING ROUND BAR Φ10 | 1 | ||
| 98A53601000008 | STRAP | 1 | ||
| 98A53601000010 | TURNBUCKLE | 1 | ||
| 98A53601000011 | NUT | 1 | ||
| 98A53601000012 | SCREW-RH THREAD ROUND BAR Φ35 | 1 | ||
| 98A53601000013 | SCREW-LH THREAD ROUND BAR Φ35 | 1 | ||
| 98A53601000015 | RING | 1 | ||
| 98A53601000020 | TENSIONER | 1 | ||
| 98A53601000021 | PALTE-RETAINING | 1 | ||
| 98A53601000022 | PLATE-RETAINING | 1 | ||
| 98A53803010000 | DRILLING TOOL | 1 | ||
| 98A54403010000 | EXTRACTOR | 1 | ||
| 98A54603010000 | TRANSFER TOOL-SPIGOT FITTING HOLES | 1 | ||
| 98A56301000000 | SLING | 1 | ||
| 98A57004010000 | WING CRADLE SET(A300) | 1 | ||
| 98A57103010000 | CALIBRATION-STANDARD | 1 | ||
| 98A57304010000 | PROTECTIVE SEAL-WING MANHOLES | 1 | ||
| 98A71101000000 | OLD OPEN ROD THRUST REVERSER | 1 | ||
| 98A76000100000 | PWA ENGINE IDLER CRANK RIGGING PIN | 1 | ||
| 98A76001000000 | PIN RIGGING - THROTTLE CONTROL | 3 | ||
| 98A760010000000 | PIN RIGGING, THROTTLE CONTROL | 1 | ||
| 98C7110H010-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 98D07203010000 | BEAM HOISTING | 1 | ||
| 98D10100006 | TOOL | 1 | ||
| 98D10100006000 | COVER-SLIP ON,PITOT PROBE | 1 | ||
| 98D10100007 | TOOL | 1 | ||
| 98D10100007000 | COVER,SLIP ON-TOTAL TEMP SENSOR,COLD WEATHER | 1 | ||
| 98D10100008 | TOOL | 1 | ||
| 98D10100008000 | COVER,SLIP ON-AOA,COLD WEATHER | 1 | ||
| 98D1010H010-000 | COVER-VENTILATION SCOOP | 1 | ||
| 98D1271203010000 | TOOL | 1 | ||
| 98D27303010000 | DRILLING TOOL-0 POSITION INDEX | 1 | ||
| 98D27309010000 | ACT FITNG REAMER SET | 3 | ||
| 98D27504010000 | ADJUSTER-KINK SEAL (UPPER AFT WY5658) | 21 | ||
| 98D280010000001 | SPANNER - OVERWING FILL | 1 | ||
| 98D28004010000 | TOOL | 2 | ||
| 98D28101000000 | TOOL | 1 | ||
| 98D32104010000 | BRACKET - INTERFACE | 24 | ||
| 98D32301000000 | PIN | 1 | ||
| 98D34103010000 | TOOL | 1 | ||
| 98D53103010000 | TOOL | 1 | ||
| 98D54003010000 | PYLON MASTER SUPPORT | 1 | ||
| 98D54403010000 | R/I APF INSTALLATION SUPPORT | 6 | ||
| 98D551090010000 | SET, BUSHING REPLACE | 1 | ||
| 98D55109010000 | WRENCH-GROOVE NUT,ELEVATOR SUPPORT STRUT | 13 | ||
| 98D57004010000 | TOOL | 1 | ||
| 98D57304001000, OR 98D57304001001 | GRID TORQUE NUT | 1 | ||
| 98D71203010000 | BOOTSTRAP SYSTEM FOR LEAP-1A | 11 | ||
| 98D71203010000_RTST | BOOTSTRAP SYSTEM CFM (RETURN TO SERVICE TEST) (CALIBRATION) | 1 | ||
| 98D71203501000 OR 98D71203501000 | BOOTSTRAP SYSTEM | 1 | ||
| 98D7123010000 | BOOTSTRAP SYSTEM CFM | 1 | ||
| 98DA28101000000 | TOOL | 1 | ||
| 98F07101000000 | JACK-FRONT | 1 | ||
| 98F07203010000 | JACKING ADAPTOR FOR TRANSLATION | 1 | ||
| 98F08001000000 | TOOL | 1 | ||
| 98F09101010000 | BAR - STEERING, NOSEWHEEL | 1 | ||
| 98F10001000000 | COVER AOA SENSOR | 18 | ||
| 98F1020100000 | TOOL | 1 | ||
| 98F10201000000 | MOORING KIT-NLG | 9 | ||
| 98F10201000001 | TOOL | 1 | ||
| 98F10201000002 | Tool | 3 | ||
| 98F10201000003 | TOOL | 1 | ||
| 98F1201010000 | TOOL | 1 | ||
| 98F2201000040 | Carro | 1 | ||
| 98F27101000000 | SLING INBOARD AILERON | 1 | ||
| 98F271080010000 | TOOL | 1 | ||
| 98F27309010000 | PIN - CENTERING | 3 | ||
| 98F2740100000 | TOOL | 1 | ||
| 98F27401000000 | PITCH TRIM CONTROL | 19 | ||
| 98F27801000000 | SLAT PCU-R/I TOOL | 1 | ||
| 98F278010000002 | Slat pfcu r/I tool | 1 | ||
| 98F27801000001 | SLAT PCU-R/I TOOL | 1 | ||
| 98F27801000002 | SLAT PCU-R I TOOL | 8 | ||
| 98F27801000002-FAPE3 | TOOL, R/I SLAT PCU A330 | 1 | ||
| 98F28109010000 | PROTECTOR- STABILIZER, MANHOLES | 1 | ||
| 98F32101000000 | TOOL R I-MLG DOOR | 6 | ||
| 98F32101000002 | TOOL R I-MLG DOOR | 2 | ||
| 98F32101000040 | OUTILLAGE POSE DEPOSE TRAPPE T.P. R/I TOOL DOOR MLG | 1 | ||
| 98F32101000042 | OUTILLAGE POSE DEPOSE TRAPPE T.P. R/I TOOL DOOR MLG | 1 | ||
| 98F32104010000 | GUIDE CONE - PIN, S/MECH | 3 | ||
| 98F32201000000 | TOOL,R/I-NLG | 1 | ||
| 98F32201000001 | TOOL,R I-NLG | 12 | ||
| 98F32201000001-REVK | TOOL,R I-NLG | 1 | ||
| 98F32201000002 | RI TOOL NLG | 5 | ||
| 98F32201000003 | R/I TOOL NLG | 5 | ||
| 98F32201000040 | OUTILLAGE POSE DEPOSE TRAIN AVANT R/I TOOL NOSE LANDING GEAR | 1 | ||
| 98F32201000042 | OUTILLAGE POSE DEPOSE TRAIN AVANT R/I TOOL NOSE LANDING GEAR | 1 | ||
| 98F32201000046 | OUTILLAGE POSE DEPOSE TRAIN AVANT R/I TOOL NOSE LANDING GEAR | 1 | ||
| 98F32201010000 | BULLET SET-NLG DOOR PIN | 1 | ||
| 98F32301000000 | TOOL-R I CLG | 6 | ||
| 98F32301000001 | R I TOOL - CLG | 1 | ||
| 98F32301000042 | LIFTING TOOL | 1 | ||
| 98F32301010000 | RIGHT BEARING INSTALLATION GUIDE - CONE CLG | 1 | ||
| 98F52001000020 | CHECK TOOL PROXIMITY | 1 | ||
| 98F53101000000 | SLING-RADOME | 7 | ||
| 98F53301000000 | WRENCH-SMALL NUT | 8 | ||
| 98F53303010000 | CWB LOWER PANEL R/I TOOL | 1 | ||
| 98F54001000000 | BLANKING PLUG KIT-ENGINE PYLON | 2 | ||
| 98F54003010000 | GEAR - HOISTING PYLON | 8 | ||
| 98F54503010000 | TOOL REBORING WING AND PYLON | 1 | ||
| 98F57004010000 | R/I KIT-ECCNTRIC BUSH | 1 | ||
| 98F57103010000 | TOOL, SB57-5010 | 1 | ||
| 98F71201000000 | TOOL | 1 | ||
| 98F71201000020 | BOOTSTRAP,SYSTEM-CFMI | 2 | ||
| 98F71201000021 | BOOTSTRAP SYSTEM,CFMI | 16 | ||
| 98F71201000041 | BOOTSTRAP FORWARD CAMBIO MOTOR A-340 | 1 | ||
| 98F71201000050 | BALL LOCK PIN | 1 | ||
| 98F71201010000 | APPROACH DEVICE FITTING - ENGINE, PYLON | 14 | View Images / Tech Appraisal | |
| 98F71203010000 | FCD FLAG | 4 | ||
| 98F732201000003 | R/I TOOL NLG | 1 | ||
| 98F780030010000 | SLING TRUST REVERSER CROWL | 1 | ||
| 98F7801000000 | PFCU SLAT | 1 | ||
| 98K7830H010-000 | TR AFT FRAME RETAINER | 1 | ||
| 98L07101000000 | ADAPTOR-JACK NOSE | 4 | ||
| 98L07203010000 | TOOL | 1 | ||
| 98L10001000000 | COVER-MFP | 11 | ||
| 98L10201000000 | MOORING,KIT-NLG | 1 | ||
| 98L26201000000 | ORIENT-EXTING DISCH HD | 2 | ||
| 98L27201000000 | TOOL-RUDDER NEUTRAL ADJUSTMENT | 2 | ||
| 98L27209010000 | ADAPTER-TURN BARREL, LOWER RUDDER | 3 | ||
| 98L27301000000 | TOOL-ELEVATOR NEUTRAL ADJUSTMENT | 2 | ||
| 98L27401000000 | LOCKING TOOL,PITCH TRIM SWITCHES | 4 | ||
| 98L27601000000 | SHIM-SETTING,SPOILER | 3 | ||
| 98L27601000040 | CALE REGLAGE SPOILER SPOILER SETTING SHIM | 1 | ||
| 98L279010010000 | SIDE STICK LOCK | 1 | ||
| 98L28201000000 | TOOL | 1 | ||
| 98L29003010000 | HOLDING TOOL-PYLON HOSES | 1 | ||
| 98L32001000000 | FILLING KIT-GEAR SHOCK ABSORBER AC ON WHEELS | 7 | ||
| 98L32101000000 | DEVICE,REMOVAL INSTALLATION-DRAG STAY,BLG | 1 | ||
| 98L32101000001 | DEVICE,REMOVAL INSTALLATION-DRAG STAY,BLG | 3 | ||
| 98L32104010000 | PIN - RIGGING, BLG | 2 | ||
| 98L32201000000 | WINCH-R I NLG LEG | 1 | ||
| 98L32201000001 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000002 | R I NLG LEG CHAIN HOIST | 1 | ||
| 98L32201000040 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000042 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000044 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000046 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000048 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000049 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201000050 | D/P NLG JAMBE R/I NLG LEG | 1 | ||
| 98L32201010000 | NLG DOORS BULLETS | 1 | ||
| 98L32401000000 | KIT, INFLATION - WHEELS | 1 | ||
| 98L34001000000 | SUPPORT TOOL-STANDBY COMPASS CALIBRATOR | 4 | ||
| 98L53103010000 | TOOL | 1 | ||
| 98L53509010000 | LADDER-ACCESS LEVEL 5 | 2 | ||
| 98L54001000000 | WRENCH SET,PYLON REMOVAL INSTALLATION | 2 | ||
| 98L54503010000 | DEVICE,REMOVAL INSTALLATION-SPIGOT BALL JOINT | 1 | ||
| 98L57203010000 | WING MANHOLE PROTECT | 1 | ||
| 98L57508010000 | TOOL | 1 | ||
| 98L7110H010-000 | DOLLY-FC | 1 | ||
| 98L7810H010-000 | SPARE BOX NOZZLE | 1 | ||
| 98L7830H010-000 | SLING-TRANSCOWL TR | 1 | ||
| 98N7110H010-000 | TOOL | 1 | ||
| 98S07003010000 | JACK ADAPTER | 1 | ||
| 98S07008010000 | Fuselage Adapter | 19 | ||
| 98S07008010000-REVB0 | FWD FUSELAGE JACK ADAPTER | 1 | ||
| 98S07008010000-ST | FORWARD FUSELAGE JACK ADAPTER | 1 | ||
| 98S10001000000 | WASH KIT AOA SENSOR COVER | 1 | ||
| 98S260030010000 | BLANKING CAP DIFFUSE | 1 | ||
| 98S27003010000 | Flap Ctl Hndl Safety Clamp | 13 | View Images / Tech Appraisal | |
| 98S27003010000-REVA0 | SAFETY CLAMP WING FLAP CONTROL HANDLE | 1 | ||
| 98S270030100000 | SAFETY CLAMP WING FL | 1 | ||
| 98S27005010000 | Elev / Tab 0° Position JIG | 1 | ||
| 98S27305010000 | TOOLS FOR DRILLING / SETTING PUM | 1 | ||
| 98S53003010000 | DRILL BUSHING | 1 | ||
| 98S53005010-000ALT | NDT BLOCK | 1 | ||
| 98S53005010000 | Skin Lap Joint Calibration | 3 | ||
| 98S53205010000 | TOOL | 1 | ||
| 98S57008010000 | FWD FUSELAGE JACK ADAPTER | 1 | ||
| 98S57008010000-REVB | FWD FUSELAGE JACK ADAPTER | 1 | ||
| 98S57205010000 | DISJUNCTOR | 1 | ||
| 98S61010000010 | PROP SUP | 1 | ||
| 98S7008010000 | ATR / ADAPTER JACK | 1 | ||
| 98S71003010000 | Go / No Go Gage Shockmount | 8 | ||
| 98S71003010000-REVA | GO NO GO GAGE | 1 | ||
| 98S710030100000 | GO/NOGO GAUGE SV | 1 | ||
| 98S71603010000 | ATR GO NO GO GAUGE | 1 | ||
| 98S760000010000 | HMU PCU PIN | 1 | ||
| 98V06001000000 | MEASUREMENT TARGETS | 3 | ||
| 98V07101000000 | JACKING NOSE FITTING | 6 | ||
| 98V09101000000 | TOWBAR A-350 | 1 | ||
| 98V10001000000 | TOOL | 1 | ||
| 98V10201000000 | MOORING KIT NLG | 5 | ||
| 98V12001000000 | Pax door access (covered Jetway) | 1 | ||
| 98V27201000000 | TL - RUD NEUTRAL ADJMT | 3 | ||
| 98V27201000001 | TOOL | 1 | ||
| 98V27301000000 | ELEVATOR NEUTRAL SETTING | 4 | ||
| 98V2740010000000 | PICHT TRIM SW LOCK | 1 | ||
| 98V27401000000 | LOCK TOOL - PITCH TRIM SWITCHES | 7 | ||
| 98V27401000001 | LOCK TOOL - PITCH TRIM SWITCHES | 3 | ||
| 98V2780100000 | TOOL | 1 | ||
| 98V27801000000 | CONTROL LEVER FLAP SLAT | 8 | ||
| 98V32001000000 | GEAR FILLING KIT - S/ABS A/C ON WHEELS | 1 | ||
| 98V32104010000 | SETTING TOOL - UPLOCK | 3 | ||
| 98V32201000000 | R/I TOOL - NLG LEG | 4 | ||
| 98V32201000001 | TOOL | 1 | ||
| 98V32201010000 | TOOL | 1 | ||
| 98V32204010000 | TOOL | 2 | ||
| 98V53509010000 | TOOL | 3 | ||
| 98V54503010000 | TOOL | 1 | ||
| 98V55109010000 | TOOL SET, R-I THS | 2 | ||
| 98V57004010000 | CRADLE WING SET | 1 | ||
| 98XXXA32001000000 | NATO KIT | 1 | ||
| 99-4001-0000 | LOCK: STRUT,ASSEMBLY, | 1 | ||
| 99000F27901000000 | TOOL ASC | 1 | ||
| 99032B010000 | HEATER | 1 | ||
| 99145A010000 | TEST BENCH | 1 | ||
| 99537A010000 | ECS BREAK OUR BOX | 1 | ||
| 99538A010000 | HEATING AND VENTILATION BREAK OUT BOX | 1 | ||
| 99539A010000 | ESC FAIHIRE RESD OUT BOX | 1 | ||
| 99540A010000 | HEATING AND VENTILATION FAILURE READ OUT BOX | 1 | ||
| 99695A010000 | TOOL, DATALOADING-AMS CONTROLLER | 1 | ||
| 99A29301000002 | RAT TEST UNIT | 1 | ||
| 99A32501010000 | DEVICE-TESTING ADJUSTMENT,N.G. WHEEL STEERING CONT | 8 | View Images / Tech Appraisal | |
| 99A34201000000 | SIMULATOR-ATTITUDE SYSTEM | 1 | ||
| 99A34201000002 | SIMULATOR-INERTIAL NAVIGATION UNIT | 1 | ||
| 99A53803010000 | REFERENCE STANDARD | 1 | ||
| 99A57004010000 | CALIBRATION STANDARD | 1 | ||
| 99A57103010000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-41 FIGURE 403 PAGE 404. Material: 2024-T3 Includes Test Report and Certificate of Conformance. | 2 | ||
| 99A76101000000 | PIN-RIGGING MAIN ENGINE CONTROL | 2 | ||
| 99A761010000000 | PIN-RIGGING, MAIN ENGINE CONTROL | 1 | ||
| 99D51103010000 | TOOL | 1 | ||
| 99D57103010000 | REFERENCE STANDARD | 5 | ||
| 99F27901000000 | SLAVE TOOL - SERVOCONTROL | 1 | ||
| 99F53103010000 | AIRBUS REFERENCE STANDARD A330 53-11-79-991-003-A PB4. MATERIAL: 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | ||
| 99F53303010000 | TOOL | 2 | ||
| 99F54503010000 | REFERENCE BLOCK | 2 | ||
| 99F57103010000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-52 Page 415 Figure 408. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | ||
| 99L53103010000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-31-24-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L53303010000 | REFERENCE BLOCK | 1 | ||
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | ||
| 9BS07008010000 | FLUID FUSELAGE JACK ADAPTOR | 1 | ||
| A310-10-10-00-0378 | COVER-CENTER PEDESTAL | 1 | ||
| A318-92010-0001 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | ||
| A318-92010-0002 | FITTING ASSY-HINGE ALIGNMENT TOOL | 1 | ||
| A330-92010-0001 | Pod & pylon assy R/I equipment | 1 | ||
| A340-92010-0001 | FITTING TOOL | 1 | ||
| A340-92010-0002 | FITTING TOOL | 1 | ||
| A3801-0000 | PYLON PLATFORM | 1 | ||
| AAH642010000 | VENT | 1 | ||
| AERMAT37RS01000-052-00 | AERMAT MATERIAL | 1 | ||
| AIT320010-000 | Handling Trolley - MLG/CLG | 1 | ||
| ALT340100001 | ADTS | 1 | ||
| AP150-010-000-1 | GROUND CHECK PRESSURE SOURCE | 1 | ||
| ARM0100007001901 | ROHMANN EXPANDABLE ROTATING PROBES | 2 | ||
| ARM0100008001901 | ROHMANN EXPANDABLE ROTATING PROBES | 1 | ||
| ATR72PDP-0100-00 | DC POWER PANNEL ASSY | 1 | ||
| AVIA-98V27801000000 | CONTROL LEVER FLAP SLAT | 1 | ||
| BC849A6010-000 | TEST SET,FUEL CONTROL | 1 | ||
| CA80100-0001 | punto izado gatos fuselaje | 2 | ||
| CA80100-0003 | ADAPTER,JACKING REAR FUSELAGE | 1 | ||
| CG9000100-0001 | KIT DRILLING TOOLS | 1 | ||
| CP690200010000 | TOOL | 1 | ||
| CUTX0100000B | EXTRACTION SET | 1 | ||
| D0003000100000 | POTENTIOMETER 8539A0 | 1 | ||
| D2565800100000 | FLY AWAY SUIT CASE | 7 | ||
| D256580100000 | TOOL | 1 | ||
| D5211080100000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| D53132010000828 | CONTAINER | 1 | ||
| D5412K01000-051MIT01 | TOOL | 1 | ||
| DLT5301-000-01 | MARKING PEN | 1 | ||
| E60100-00 | OXY RELEASE TOOL | 4 | ||
| ENERPAC 0-10000 | GAUGE 0-10000 PSI | 1 | ||
| F01-14-1-01-0000 9,4х103 | SHEAR BOLT FOR TOWBAR CRJ700/900 | 1 | ||
| F1000100000000 | COVER ON SLIP AOA | 1 | ||
| F98000F07101000000 | Jack 50 t NLG | 1 | ||
| FD00-04-35-00100-00 | Escalera ligera Línea | 1 | ||
| G600-100001-11 | WARNING STREAMER | 5 | ||
| G600-100003-1 | COWL UPPER ACCESS | 1 | ||
| G670100000-1 | MOORING KIT | 1 | ||
| G670100001-1 | NOSE LANDING GEAR GROUND LOCK PIN | 3 | ||
| G670100002-1 | MAIN LANDING GEAR GROUND LOCK PIN | 5 | ||
| GEN01-0000158 | WHEEL CHOCK | 1 | ||
| GROO-03-35-00100-0001 | STAND TAIL MAINTENANCE | 1 | ||
| GROO-04-35-00100-0001 | NOSE BERTH LH | 1 | ||
| GROO-05-35-00100-0001 | NOSE BERTH LH | 1 | ||
| HC132H0010-000 | ENG HOIST FRAME SUPPORT | 1 | ||
| HC132H0100-002 | MLG SUPPORT CHAIN | 1 | ||
| HC132H0100-004 | SUPPORT CHAIN | 1 | ||
| HC132H0100-006 | CHAIN -PREVENTS MAIN LEG EXTENSION | 1 | ||
| HC132H0100-008 | CHAIN | 1 | ||
| HC212B0010-000 | THIS IS NOT A TOOL | Not Available | Not Available | |
| HDA 4745-A-010-000 | PRESSURE SENSOR, PRESSURE TRANSMITTEN | 1 | ||
| HY50-100-001 | MICROMETER | 1 | ||
| LE81601Z01-17068000401 000007-18E | DUMMY, ESCAPE SLIDE, FORWARD PASSENGER DOOR | 1 | ||
| LE81601Z01-1706800040100000718 | DUMMY ESCAPE SLIDE,FORWARD PASSENGER DOOR | 1 | ||
| LE81601Z01-17068500401 000007-18E | DUMMY, ESCAPE SLIDE, AFT PASSENGER DOOR | 1 | ||
| LE98101Z01-0000 | PROTECTIVE BOX | 1 | ||
| LIN50100001 | MICROMETER 0-1" | 1 | ||
| MA0100000400PSI | 0-400 PSI GAUGE | 1 | ||
| MEL4160100-001 | BALANCING-TOOL S/A | 1 | ||
| MTOO04-CA4M0100-0005 | Llave de vaso para rodamiento | 1 | ||
| MTSGSE 0001-0000 | CFM56-3 UNIVERSAL BASE | 1 | ||
| NA010000 | CHOCK | 1 | ||
| PM01-00-00 | TOOL | 1 | ||
| PMLX01-CA4M0100-0003 | Plantillas Aluminio 1mm | 1 | ||
| PRMV-01-4834-10100-002-B | TEST KIT,BOOM | 1 | ||
| PT-EXP-7500TO10000 | PT-EXP-7500TO10000;Expand PT-Server-7500 to PT-Server-10000 Software | 1 | ||
| RBEA33-0100-00-6805 | Adapter | 1 | ||
| S16-0240-10000 | GUIDE FOR HEND REAMER | 1 | ||
| S3021210100000 | PIPE | 1 | ||
| SBE2058A010000 | ELECTRICAL CONTROL BOX | 1 | ||
| SIADAPAT-0100-00 | SEAT RAIL ADAPTER | 1 | ||
| SIP01-00001 | SADDLE | 1 | ||
| SIP01-00002 | DUSTPROOF COVER | 1 | ||
| SIP01-00003 | SEAL RING (38X30X6) | 1 | ||
| SIP01-00004 | VALVE COVER | 1 | ||
| SIP01-00005 | SPRING COVER | 1 | ||
| SIP01-00006 | SPRING | 1 | ||
| SIP01-00007 | STEEL BALL FOR 03871 | 1 | ||
| SIP01-00008 | SEAL RING (7.7 X 1.9MM) | 1 | ||
| SIP01-00009 | RELEASE VALVE | 1 | ||
| SL90-350-1-0000 | TOOL - EXTRACTION, TAB WASHERS STA-LOK N | 1 | ||
| SNFB02010000 | HYDRAULIC UNIT B020-10000-000 | 1 | ||
| SNFG36010000 | HYDRAULIC UNIT | 1 | ||
| SP00-02-35-00100-0001 | Soporte | 1 | ||
| STT000010000060 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE | 1 | ||
| STT000010000090 | ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE | 1 | ||
| STT000010000120 | ACCESS PLATFORM 8M (26 FT) - ADJUSTABLE | 1 | ||
| STT000010000130 | ACCESS PLATFORM 6M (20 FT) - ADJUSTABLE | 1 | ||
| T135196010000 | GROUND TEST UNIT RAT | 1 | ||
| T1351960100000 | GROUND TEST UNIT - RAT | 1 | View Images / Tech Appraisal | |
| T7.92.9974.010.000.00 | RAT HANDLE | 1 | ||
| T792992010000000D | ADAPTOR | 1 | ||
| T7929920100000100H | JACK ADAPTER (WING RIGHT) | 1 | ||
| T792992010000100H | JACK ADAPTOR | 1 | ||
| T792992010000200H | ADAPTOR | 1 | ||
| T792992010000300 | ADAPTOR | 1 | ||
| T7929920100005.00 | ADAPTER | 1 | ||
| T792992401000000D | TOOL | 1 | ||
| T792994001000000H | TOOL FOR FLEXIBLE JOINT (A) PIN REMOVAL | 1 | ||
| T79299501000000D | GEARED ROTARY ACUATOR LOCK SET | 1 | ||
| T79299501000000H | GEAR ROTARY ACTUATOR LOCK SET | 1 | ||
| T792997401000000D | RAT HANDLE | 1 | ||
| T792997401000000H | RAT HANDLE | 1 | ||
| T792998601000000H | THIS IS NOT A TOOL | Not Available | Not Available | |
| TE301-000-00-100 | PDU TEST SYSTEM | 1 | ||
| TMH AE01-00-00 | Overload Warning Horn Kit | 1 | ||
| TMH CP01-00-00 | Axle Jack - 11 Ton | 1 | ||
| TMH DE01-00-00 | DISCHARGE VALVE | 1 | ||
| TMH SU01-00-00 | RELIEF VALVE CARTRIDGE | 1 | ||
| TMHAS01-00-00 | Safety Stay H 1000/2450 | 8 | ||
| TMHAS010-00-00 | SAFETY STAY TOOL | 1 | ||
| TMHMA01-00-00 | ADAPTER MLG JACK | 1 | ||
| TMHNA01-00-00 | NLG Jack Adapter | 9 | ||
| TMHNA01-00-00-5J | ADAPTER-NLG JACK | 1 | ||
| TMHNA01-00-00-SPL | NLG JACK ADAPTER - SURPLUS | 1 | ||
| TMHNA01-00-00/200951A | NLG JACK ADOPTER | 1 | ||
| TMHNA01-00-00/D2282700 | NLG JACK ADAPTER ATR | 1 | ||
| TMHPM01-00-00 | HAND PUMP Diam12 | 1 | ||
| TMHPM01-00-00-SK | SEAL KIT HAND PUMP | 1 | ||
| UR0118010000000 | PRESSURE PICK-OFF PLUGS | 1 | ||
| UZ9605010000000 | PRESSURE TEST PLATE | 1 | ||
| VK192-1010-0002 | CASE CONTAINER GRAY | 1 | ||
| VK192-1010-0003 | CASE CONTAINER GRAY | 1 | ||
| WS1218010000 | FX95 1.5HP COMPRESSOR | 1 | ||
| WS1683010000 | 15HP 270L SCREW COMP 400V DRY | 1 | ||
| WS4082010000 | GASKET KIT | 1 | ||
| WS4085010000 | FILTER | 1 | ||
| WS7130010000 | TAP | 1 | ||
| WS7190010000 | NON RETURN VALVE | 1 | ||
| WS7201000000 | FLYWHEEL | 1 | ||
| WS7201010000 | FLYWHEEL AB510 | 1 | ||
| WS7210010000 | FILTER ELEMENT (DD7/24) | 1 | ||
| WS7230010000 | BLEED PIPE (PLASTIC) | 1 | ||
| WS7330010000 | WHEEL SPACER | 1 | ||
| Т792990601000000H | AIRCELLE S.A | 1 | ||
| Т792995010000000D | TOOL | 1 | ||
| Т792995010000000H | TOOL | 1 | ||
| Т79299501000000Н | GEARED ROTARY ACTUATOR LOCK SET | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
