| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 000000 | Adapter | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| 1 | ||||
| (CALIB) 97000D06000000001 | OUTILLAGE VERIF/REGLAGE ORIENTATION ROUE AVANT | 1 | ||
| (CALIB) 97000D27500000001 | ASSERVISSEMENT BECS & VOLETS A320 | 1 | ||
| (CALIB) 97000F275.01000.000 | ASSERVISSEMENT BEC & VOLETS A330 / A340 | 1 | ||
| (CALIB) 97A27003000000 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 97D21503000000 | TESTTOOL TEST TOOL-TWO SPEED FANS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 97D34103000000 | AOA SENSOR TOOL (CALIBRATION) | 2 | ||
| (CALIB) 97l27901000000 | ASC CDV A380 | 1 | ||
| (CALIB) 98A24403000000 | CABLE HOLDING STRAP | 1 | ||
| (CALIB) 98A27309000000 | GAUGE GAUGE-ELEVATOR NEUTRAL SETTING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A27801000000 | EQUIPMT EQUIPMENT -REMOVAL INSTALLATIO (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A28104000000 | Water Drain Purger (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A29003000000 | HYDRAULIC CONNECTORS TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A32101000000 | HANDLING TROLLEY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A32203000000 | NOSE LANDING GEAR INST. (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A34103000000 | CONTROL CONTROL-TOOL FUSELAGE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A34203000000 | GYRO UNIT-ADJUSTMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A53601000000 | SLING R/I,RADOME (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A55303000000 | HOIST ASSY - FIN (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57804000000 | SLING SLING - SLAT NO 1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98A57904000000 | SLING - OUTER FLAP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D07103000000 | DYNAMOMETER-SAFETY STAY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D08003000000 | SET SET-PLUMB BOBS MLG NLG WHEELS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D10003000000 | COVER INLET COWL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D27803000000 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D28104000000 | PIPE PIPE ADAPTING-WATER DRAINING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D32303000000 | SOCKET WRENCH, SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D34103000000 | ALIGNMNT ALIGNMENT,TOOL-IRU PLATFORM BRA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D34203000000 | ALIGNMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D36103000000 | PRESSURE LOSS TEST (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D53203000000 | TUBE SPACER TUBE NLG BEARING FITTING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D54003000000 | TROLLEY TROLLEY-PYLON R I (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D54503000000 | WRENCH PYLON REMOVAL-WRENCH (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98D76103000000 | LEVER THROTTLE LEVER LOAD MEASURE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F07103000000 | SAFETY WARNING KIT TAIL JACK (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F10201000000 | MOORING KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F12303000000 | CONNECTR CONNECTORS-HYDRAULIC (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F21503000000 | AIR AIR CYCLE MACHINE TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F24303000000 | TOOL R I BATTERY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F26203000000 | TESTTOOL TEST TOOL - ENG. FIRE EXTINGUIS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F27203000000 | TOOL TOOL-RUDDER NEUTRAL ADJUSTMENT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F27303000000 | ELEVATOR CHECK ELEVATOR-FREE PLAY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F27503000000 | FLAPPCU FLAP PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F27803000000 | SLATPCUL SLAT PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F28203000000 | FUEL PIPE POSITION TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F30403000000 | RAIN REPELLENT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32101000000 | TOOL TOOL R I-MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32104000000 | REMINST REM.-INST. TOOL, PINTLE PINS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32201000000 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32204000000 | HANDTRLL HANDLING TROLLEY LG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F32301000000 | TOOL TOOL-R I CLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F34103000000 | ADAPTER ADAPTER-COVER STATIC PROBE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F47103000000 | PALLET INERTING LRB (CALIBRATION) | 3 | ||
| (CALIB) 98F53101000000 | SLING RADOME (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F54003000000 | EXTRACTR PYLON SHAFT EXTRACTOR RIB8 RIB1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F54403000000 | REMINST REMOVAL-INSTALLATION - SPIGOT B (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F54503000000 | PYLONREM PYLON REMOVAL - WRENCHES (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F55003000000 | Transportation trolley (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F56103000000 | TOOL R I FRONT WINDOW TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98F76103000000 | THROTTLE LEVER LOAD MEASUREMENT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L07101000000 | ADAPTOR ADAPTOR-JACK NOSE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L08103000000 | RODS RODS,SIGHTING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L09103000000 | BAR BAR-STEERING,NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L10201000000 | MOORING MOORING,KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L20003000000 | ADAPT MULTI ADAPTOR TRIPOD (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L24303000000 | DEVICE DEVICE,BATTERY REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L26203000000 | TESTTOOL TEST TOOL-FIRE EXTINGUISHING SY (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27003000000 | TOOL MULTIPURPOSE LIFTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27004000000 | COLLAR COLLAR, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27103000000 | DEVICE DEVICE - R I, AILERONS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27301000000 | TOOL TOOL-ELEVATOR NEUTRAL ADJUSTMEN (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27601000000 | TOOL SHIM-SETTING,SPOILER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L27603000000 | DEVICE DEVICE, REMOVAL INSTALLATION - (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L29003000000 | WRENCH WRENCH,HP MANIFOLD FILTER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L29103000000 | REMOVAL/ INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32001000000 | FILLING FILLING KIT-GEAR SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32003000000 | GEAR FILL SHOCK ABSORBER KIT (CALIBRATION) | 1 | ||
| (CALIB) 98L32101000000 | DEVICE DEVICE,REMOVAL INSTALLATION-DRA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32201000000 | WINCH WINCH-R I NLG LEG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L32203000000 | DEVICE DEVICE, REMOVAL INSTALLATION - (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L36103000000 | EXCHANGR EXCHANGER PRECOOLER (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L52003000000 | BARRIER BARRIER,SAFETY-UPPER DECK DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L53103000000 | DEVICE DEVICE,REMOVAL INSTALLATION-RAD (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L54001000000 | WRENCH SET, PYLON INSTAL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L54003000000 | ADAPTER ADAPTER,DYNAMOMETRIC NDT RR EA (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L57003000000 | ACCESS BY DOOR MD3 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L57304000000 | HOIST HOIST-WING TIP (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L71003000000 | BOOTSTRP BOOTSTRAP SYSTEM - RR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98L71203000000 | WRENCH WRENCH SET,TORQUE-RR(MSN 1,2,4 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98S10005000000 | WHEEL CHOCK – MLG | 1 | ||
| (CALIB) 98S12003000000 | WATER DRAIN PURGING TOOL | 1 | ||
| (CALIB) 98S12005000000 | LANDING GEAR FITTING BOLTS EXTRACTOR | 1 | ||
| (CALIB) 98S21305000000 | TOOL I/F ADC-VACUUM PUMP SET ADAPTERS | 1 | ||
| (CALIB) 98S24005000000 | SUITCASE OF ELECTRICAL SUPPORT | 1 | ||
| (CALIB) 98S24905000000 | ELECTRICAL BONDING KIT | 1 | ||
| (CALIB) 98S25205000000 | TOOL FOR SEAL PLACEMENT | 1 | ||
| (CALIB) 98S26005000000 | CARGO COMPT. AIR PROOF MEASUREMENT TOOL | 1 | ||
| (CALIB) 98S27603000000 | DUMMY SPOILER VALVE BLOCK | 1 | ||
| (CALIB) 98S29103000000 | SPECIAL WRENCHES | 1 | ||
| (CALIB) 98S32003000000 | ANTI SKID ADJUST TOOL | 1 | ||
| (CALIB) 98S32005000000 | NLG. STEERING ALIGNMENT | 1 | ||
| (CALIB) 98S32405000000 | BRAKE PRESS BRK SYS PURGING TOOL-20028A | 1 | ||
| (CALIB) 98S34005000000 | ALPHA PROBE PROTACTOR SET | 1 | ||
| (CALIB) 98S34203000000 | TOOL COMPENSATION | 1 | ||
| (CALIB) 98S35105000000 | TOOL FOR CHECK LEAK OXYGEN | 1 | ||
| (CALIB) 98S45105000000 | PMAT 2000 ADAPTER CABLE | 1 | ||
| (CALIB) 98S52403000000 | SAFETY PIN | 1 | ||
| (CALIB) 98S52805000000 | WRENCH MLG DOOR INSTAL | 1 | ||
| (CALIB) 98S53205000000 | PAX VACUUM PAX ASSY | 1 | ||
| (CALIB) 98S54205000000 | FLATNESS CHECKING TOOL ATR42 | 1 | ||
| (CALIB) 98S57205000000 | EXTRACTION TOOLING (Item en 001) Extracteur allégé ferrure AR pan. extr. Dé | 1 | ||
| (CALIB) 98S57505000000 | DOIGTS DE GUIDAGE VOLETS | 1 | ||
| (CALIB) 98S61005000000 | PROPELLER CONTROL UNIT SETTING TOOL | 1 | ||
| (CALIB) 98S71005000000 | WRENCH FOR TORQUING ALTERNATOR NUTS | 1 | ||
| (CALIB) 98S71205000000 | WRENCH | 1 | ||
| (CALIB) 98S79005000000 | OIL ENGINE DRAINING CPLG-9905A11 | 1 | ||
| (CALIB) 98V07101000000 | JACKING-NOSE FITTING (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V08103000000 | SIGHTING RODS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V10201000000 | MOORING KIT NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V12003000000 | BAY ACCESS PLATFORM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V20003000000 | ELEVATOR PLATFORM (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V21503000000 | ADAPTER, R/I VCRU (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V24203000000 | R/I RAT (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V26203000000 | TEST-FES-ENGINE HALON (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V27003000000 | PFC RIGGING TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V27004000000 | R/I TOOL - AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V27503000000 | R/I FLAP PCU (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V27803000000 | R/I SLAT PCU (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V29103000000 | RI - EMP YELLOW RESERVOIR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V32104000000 | MLG REMOVAL INSTALLATION TOOL (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V32201000000 | R/I TOOL - NLG LEG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V36003000000 | R/I PCE (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V51003000000 | Retainer Tool Kit (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V52203000000 | CPRSR-JACK, EMERGENCY DOOR (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V52403000000 | CPRSR-Jack, AVNCS Door (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V53103000000 | R/I RADOME (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V56003000000 | R/I WINDOWS (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V57304000000 | SLING - WINGLET (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 98V72003000000 | RI FAV (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99A28404000000 | ADAPTOR SEQUENCE VALVE TEST (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) 99D24003000000 | PLUG PLUG-ELECTRICAL TEST (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792992055000000H | Sling equipment MLG and NLG (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792994004000000H | Nose wheel steering angle measurement device (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792995001000000H | Angle measuring device set (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792996000000000H | Bootstrap (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792999401000000H | UNIVERSAL LIFTING BEAM 1 (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) T792999440000000H | Equipment R/I Stabilisator (CALIBRATION) (CALIBRATION) | 1 | ||
| (CALIB) VL500Y000000000 | DEVICE - ADJ, RDNG LGHTS (CALIBRATION) (CALIBRATION) | 1 | ||
| 00-3600-0-0006 | PNEUMATIC TESTER | 1 | ||
| 00000072E00 | TURNTABLE VTA 1 SET 2 PC | 1 | ||
| 0005.10.0000.00 | EUROCOPTER AS355 Twin Star Tail Jack | 1 | ||
| 001A554A0000000 | RUDDER RIGGING BOARD | 1 | ||
| 01-0400-0000 | TOWHEAD ASSEMBLY (US | 9 | ||
| 01-1300-0000 | Towbar, Custom Falcon (Ce) | 1 | ||
| 01-2000-0000 | Towbar, Adam A700 & A500 Vlj | 1 | ||
| 01-8000-0000 | Head, Dash 8 100-300 (Ce) | 1 | ||
| 01801000000 | TURN OUT TOOL | 1 | ||
| 01803000000 | EXTRACTING TOOL | 1 | ||
| 01803000000/10 | EXTRACTING TOOL | 1 | ||
| 03-5400-0000 | EXTENSION: LEG,JACK,TRIPOD, DROP SHIP ONLY | 3 | ||
| 03−5800−0000 | Support − Rear Fuselage | 1 | ||
| 0330.01.0000.00 | EUROCOPTER AS-350/AS355/AS365 Tail Jack | 1 | ||
| 050-0000-0108-00 | ECT - 110 lb Electronic Compression Tester | 1 | ||
| 050-0000-0109-00E | ELCTRNIC COMPRESSIN TESTR | 1 | ||
| 0630.00.0000.00 | CARRO DESHIELO | 1 | ||
| 073309000000000 | LEVER TOOL | 1 | ||
| 073687010000000 | EXTENDER BOARD | 1 | ||
| 073687020000000 | EXTENDER BOARD | 1 | ||
| 073687030000000 | EXTENDER BOARD | 1 | ||
| 073692010000000 | TEST FIXTURE | 1 | ||
| 073692020000000 | ELECTRONIC BOX | 1 | ||
| 08000000 | 1218-*DISC*SCREWDRIVER BIT PH000 | 1 | ||
| 0802.00.0000.00 | JACK, AXLE | 1 | ||
| 0892.00.0000.00 | WING SAFETY SUPPORT | 1 | ||
| 0910.00.0000.00(x2) | Alenia C-27J Nose Jack | 1 | ||
| 094600-0000-110 | LIGHTING SYSTEM,REMOTE AREA,12V,2 HEADS,48 LEDS, | 1 | ||
| 101-000000/934 | TORQUE SYSTEM CALIBRATION | 3 | ||
| 10A53803000000 | CENT PLT- DRILL BUSH | 1 | ||
| 1120000-001 | BLOCK | 1 | ||
| 11G13S53371100-00007-R- | STABILISATION TOOL-WASHER | 1 | ||
| 121580000000 | VENTILATED ARINC BASEPLATE | 1 | ||
| 1226-90-3000000 | BTAC TARGET INSPECTION TOOL | 1 | ||
| 123790300000000 | FTAC TARGET INSPECTION TOOL | 1 | ||
| 1245.00.0000.00 | FLIR TURRET R/I TROLLEY | 1 | ||
| 1487-00-0000-00 | TAIL TRIPOD JACK | 1 | ||
| 1489-00-0000-00 | MAIN TRIPOD JACK | 1 | ||
| 1490-00-0000-00 | NOSE TRIPOD JACK | 1 | ||
| 15095-000-000 | HAND PUMP | 1 | ||
| 15151-000-000 | HAND PUMP | 2 | ||
| 15232-000-000 | HAND PUMP | 1 | ||
| 153010-000007 | 1090 MHz Transponder ADS-B Out, WAAS GPS | 1 | ||
| 16600000000000 | SERVICE DOOR LOCKOUT TOOL | 1 | ||
| 172-60000-00 | RR Allison Tool | 1 | ||
| 1796.40.0000.00 | LANZA DE ARRASTRE LTB 70-100 | 1 | ||
| 1803000000 | EXTRACTOR TOOL | 1 | ||
| 19-4300-0000 | Cart - Potable Water Servicing | 1 | ||
| 1906-00-0000-00 | OXYGEN BOOSTER SYSTEM, | 1 | ||
| 1910000000 | SCREWTY SET - DM (M12, 15-17 INCH-POUNDS & M8, 4-6 INCH-POUNDS) | 1 | ||
| 1920000000 | SCREWTY SET-DM (WITH M8 | 2 | ||
| 1IAS-000000412 | P05 MOD KIT (REQUIRED TO UPGRADE GENX-1B PRESERVATION KIT P/N 11C4552P03 TO 11C4552P05) | 1 | ||
| 2000000-1197 | RIVET | 1 | ||
| 2000000-1198 | RIVET | 1 | ||
| 2000000-1415-1 | LOW PRESSURE BLEED AIR CAP | 1 | ||
| 227A0000-000-001-1-3-2PTE23 | Pin | 1 | ||
| 227A0000-000-001-1-4-2PTE23 | Pin | 1 | ||
| 227A0000-000-001-1-4-3PTE23 | Pin | 1 | ||
| 227A0000-000-001-1-4-5PTE23 | Pin | 1 | ||
| 227A0000-000-001-1-6-5PTE23 | Pin | 1 | ||
| 227A0000-000-001-3-5-12PTE23 | Pin | 1 | ||
| 227A0000-000-001-3-5-4.1PTE23 | Pin | 1 | ||
| 227A0000-000-001-3-5-4.3PTE23 | Pin | 1 | ||
| 228A0000000001PTE4 | TOOL | 1 | ||
| 228A2000-000-001PTE4 | TOOL | 1 | ||
| 232A6000-000-001TI | TOOL | 1 | ||
| 238A3000-000-001PTE8 | TOOL | 1 | ||
| 247A0000-000-001PTE1 | TOOL | 1 | ||
| 247A0000-000-001PTE2 | TOOL | 1 | ||
| 247A2200-000-001PTE1 | TOOL | 1 | ||
| 249A1200-000-001PTP2 | TOOL | 1 | ||
| 299-500-000-005 | TEST-SOFTWARE | 1 | ||
| 3038A0000-001 | DISCHARGE VALVE | 1 | ||
| 309946-5000-000 | LCR-100 L1MS SOFTWARE | 1 | ||
| 31000000 | Bit holder 1/4" L.72mm | 2 | ||
| 31300-00000-100 | DRAWING | 1 | ||
| 3190029-000-000 | TOOL LUG RELEASE | 1 | ||
| 323-7000-000 | EXTRACTION-TOOL NYLON PLASTIC | 1 | ||
| 3300-0000-002 | CHEAR BUSH | 1 | ||
| 35-943-1000-000 | REPROGRAMMING MODULE | 1 | ||
| 37A0D03000000 | PRECIS-RMR | 1 | ||
| 37M315-2000-000 | JAMMING DETECTION CONTROL UNIT TEST BENCH | 1 | ||
| 37M467-2000-000 | TEST BENCH | 1 | ||
| 37M890-1000-000 | TEST BENCH | 1 | ||
| 37M940-2000-000 | TEST BENCH | 1 | ||
| 394000000-1 | PRECISE ANGLE INDICATOR | 1 | ||
| 4510T2000-000 | TEST SET, ELECTRONIC | 1 | ||
| 4510T3000-000 | TEST SET, COMPONENT AND WIRING CHECKOUT - CLS | 1 | ||
| 460000000 | TOOL | 1 | ||
| 4800-000-00 | ENGINE SUPPORT TRAILER | 1 | ||
| 4900002000000 | DEVICE - MEASURE, BELT-TENS | 1 | ||
| 492000000 | FLARING TOOL | 2 | ||
| 5106-701-5000000 | CYLINDER INSTALLATION TOOL FOR INSTALLATION OF CLEVIS | 1 | ||
| 530A0000-000-431PTE46 | TOOL | 1 | ||
| 531A0000-000-501PTP1 | TOOL | 1 | ||
| 531A2270-000-001ME5 531A2270-000-002ME6 | TOOL | 1 | ||
| 534A5000-000-001ME3 | TOOL | 1 | ||
| 534A5000-000-001ME4 | TOOL | 1 | ||
| 534A5000-000-001ME6 | TOOL | 1 | ||
| 534A5000-000-001ME7 | TOOL | 1 | ||
| 534A7000-000-001PTP1 | TOOL | 1 | ||
| 536A2070-000-001ME2 536A2070-000-002ME1 | TOOL | 1 | ||
| 536A2070-000-001ME4 536A2070-000-002ME2 | TOOL | 1 | ||
| 536A2070-000-002ME1 | TOOL | 1 | ||
| 538A2130-000-001STR1-30000 | TOOL | 1 | ||
| 541A0000-000-001PTP3 | TOOL | 1 | ||
| 541A1000-000-001PTP2 | TOOL | 1 | ||
| 554A0000-000-408PTE1-107 | TOOL | 1 | ||
| 572A0000-000-001STR3-DQ | TOOL | 1 | ||
| 572A2370-000-001PTP1 | TOOL | 1 | ||
| 581A0000-000-003PTP1 | TOOL | 1 | ||
| 582A0000-000-001PTE2 | TOOL | 1 | ||
| 607A010000-00 | TOOL | 1 | ||
| 607A070000-00 | TOOL | 1 | ||
| 607A090000-00 | TOOL | 1 | ||
| 609A070000-00 | TOOL | 1 | ||
| 61-200-0000 | TESTER WST 50-80 | 2 | ||
| 610A270000-00 | TOOL | 1 | ||
| 610A400000-00 | TOOL | 1 | ||
| 610A420000-00 | TOOL | 1 | ||
| 610A510000-00 | TOOL | 1 | ||
| 610A520000-00 | TOOL | 1 | ||
| 612A050000-00 | TOOL | 1 | ||
| 612A060000-00 | TOOL | 1 | ||
| 612A070000-00 | TOOL | 1 | ||
| 620A010000-00 | TOOL | 1 | ||
| 620A010000-00 Rev B | TOOL | 1 | ||
| 624A040000-00 | TOOL | 1 | ||
| 624A080000-00 | TOOL | 1 | ||
| 627A160000-00 | TOOL | 1 | ||
| 627A170000-00 | TOOL | 1 | ||
| 627A180000-00 | TOOL | 1 | ||
| 627A220000-00 | TOOL | 1 | ||
| 627A250000-00 | TOOL | 1 | ||
| 627A330000-00 | TOOL | 1 | ||
| 627A340000-00 | TOOL | 1 | ||
| 628A020000-00 | TOOL | 1 | ||
| 628A040000-00 | TOOL | 1 | ||
| 628A090000-00 | TOOL | 1 | ||
| 628A140000-00 | TOOL | 1 | ||
| 63000F25275000000 | Sangle demanutention meuble | 1 | ||
| 632A030000-00 | TOOL | 1 | ||
| 632A070000-00 | TOOL | 1 | ||
| 632A080000-00 | TOOL | 1 | ||
| 632A090000-00 | TOOL | 1 | ||
| 632A120000-00 | TOOL | 1 | ||
| 632A160000-00 | TOOL | 1 | ||
| 64000F25010000000-A0 | Hatracks door alignment device | 1 | ||
| 64300D71010000000 | outil de centrage tuy.anti-ice | 1 | ||
| 64302FE392000000 | LOCKING PIN SSU | 1 | ||
| 655A100000-00 | TOOL | 1 | ||
| 656A010000-00-B | TOOL | 1 | ||
| 656A020000-00-B | TOOL | 1 | ||
| 657A010000-00 | TOOL | 1 | ||
| 657A040000-00 | TOOL | 1 | ||
| 678A010000-00 | TOOL | 1 | ||
| 678A020000-00 | TOOL | 1 | ||
| 678A020000-00-A | TOOL | 1 | ||
| 7000000039 | EN-DOUILLE CHROMEE | 1 | ||
| 7000000121 | EN-PIED EPAULE | 1 | ||
| 7000000146 | SLEEVE | 1 | ||
| 7000000147 | SLEEVE | 1 | ||
| 7000000174 | EN-DOUILLE | 1 | ||
| 7000000183 | EN-DOUILLE | 1 | ||
| 7000000185 | EN-DOUILLE | 1 | ||
| 7000000188 | EN-DOUILLE | 1 | ||
| 7000000194 | EN-DOUILLE | 1 | ||
| 7000000199 | SLEEVE | 1 | ||
| 7000000200 | BUSH | 1 | ||
| 7000000203 | SLEEVE | 1 | ||
| 7000000218 | DRIVING GEAR SLEEVE | 1 | ||
| 7000000224 | EN-DOUILLE PIGNON APPARIES | 1 | ||
| 7000000225 | EN-DOUILLE PIGNON SORTIE A | 1 | ||
| 7000000226 | EN-DOUILLE PIGNON SORTIE | 1 | ||
| 7000000311 | FERRULE | 1 | ||
| 7000000350 | RING | 1 | ||
| 7000000550 | 3M 051144-76433 Roloc 777F Orange 2 60 YF-weight TR Disc | 1 | ||
| 7000000602 | 3M ROLOC 45092 BLACK 3 X 14-20 INTERNAL MEDIUM DIS | 1 | ||
| 7000000751 | 3M SCOTCH‑BRITE ROLOC SURFACE | 1 | ||
| 7000000786 | 3M ROTO PEEN FLAP ASSEMBLY, TC 330, 9/16”X1-1/4” | 3 | ||
| 7000000787 | ROTO PEEN FLAP ASSEMBLY, 2-INCH BY 1-INCH | 2 | ||
| 7000000956 | 3M 021200-82314 Scotch-Weld EPX GrayBlack 50 mL 21 Plunger for EPX PLUS II Applicator | 1 | ||
| 703A91-0000-00 | NYLON THREAD L200MM | 1 | ||
| 703A94-0000-00 | FIT AND CLEARANCES DIAL COMPARATOR | 1 | ||
| 703A94-0000-00/PHP | COMPARATOR | 1 | ||
| 72143310000000 | EXTENDER BOARD | 1 | ||
| 72143320000000 | EXTENDER BOARD | 1 | ||
| 72143330000000 | EXTENDER BOARD | 1 | ||
| 7600-0000-2692 | PORTABLE SPECTROPHOTOMETER | 1 | ||
| 807-100-000-021 | DETECTOR ICE VIBROMETER MD83 | 5 | View Images / Tech Appraisal | |
| 810.000.00 | TANK VENTING BLOWER KIT | 1 | ||
| 8242000000 | ARRIEL-ARRIUS-TM333 engines wooden crate | 2 | ||
| 850000006 | CRIMPING TOOL | 3 | ||
| 8601359531000000 | TEST SET | 1 | ||
| 94710000-000 | MODEL 7027-1 ELECTRONIC TEST SET | 1 | ||
| 95000F92300000000 | Metal Set Square | 1 | ||
| 95G52007000000 | TOOL | 1 | ||
| 96A98000000 | ELT 96 PROGRAMMER | 1 | ||
| 96S10203000000 | TOOL | 1 | ||
| 97-000000/939-1 | SAFETY NET | 1 | ||
| 97000F25390000000 | lifting lever for galleys | 1 | ||
| 97A26202000000 | DUMMY FIRE EXT BOTTLE ENGINE | 1 | ||
| 97A27003000000 | GAGE ASSY,PUSH-PULL | 6 | ||
| 97A272025000000 | QUADRANT ASSY | 1 | ||
| 97A34302000000 | TOOL, ADJUSTMENT-WGD2 OPTICAL HEAD | 1 | ||
| 97A49602000000 | MEASURING EQUIPMENT - RAT CONTROL OPERATING LOAD | 2 | ||
| 97A52702000000 | ADJUSTMENT TOOL | 1 | ||
| 97D21503000000 | TEST TOOL-TWO SPEED FANS | 4 | ||
| 97D34103000000 | AOA SENSOR TOOL | 17 | View Images / Tech Appraisal | |
| 97F08001000000 | MEASUREMENT TARGET | 1 | ||
| 97F26103000000 | TEST TOOL-PRESSURE,FIRE EXTINGUISHING BOTTLE | 6 | ||
| 97F29103000000 | TEST TOOL-FIRE SHUT-OFF VALVE | 1 | ||
| 97F34103000000 | TOOL | 1 | ||
| 97V10001000000 | CHOCK-MLG, ENGINE RUN UP | 1 | ||
| 97V52301000000 | Securite ouverture/fermeture porte soute arriere | 1 | ||
| 98000S10000000 | CABIN MOORING ACCES | 1 | ||
| 98A09001000000 | BAR-TOWING SUPSD BY STANDARD TOWBAR | 1 | ||
| 98A09003000000 | BAR-STEERING, NOSE WHEEL | 2 | ||
| 98A10001000000 | COVER,BLANKING-PRE-COOLER AIR OUTLET | 3 | ||
| 98A10003000000 | COVER BLANKING-ENGINE EXHAUST NOZZLE | 1 | ||
| 98A12003000000 | UNIT TOPPING UP HYDRAULIC TANK PORTABLE | 1 | ||
| 98A20003000000 | RIGGING PIN BOX FOR B2, B2K AND B4 FLIGHT CONTROLS | 2 | ||
| 98A21001000000 | R/I EQUIPMENT-REFRIGERATION UNIT | 2 | ||
| 98A21003000000 | EXTRACTOR-BLEED AIR PRECOOLER COLD AIR INLET DUCT | 1 | ||
| 98A24003000000 | TOOL | 1 | ||
| 98A24403000000 | CABLE HOLDING STRAP | 31 | ||
| 98A26103000000 | TEST PIN | 1 | ||
| 98A26201000000 | EQUIPMENT-R/I,ENGINE FIRE EXTINGUISHER | 8 | View Images / Tech Appraisal | |
| 98A26203000000 | BLANKING-TOOL | 1 | ||
| 98A27003000000 | EXTRACTORS | 11 | View Images / Tech Appraisal | |
| 98A27004000000 | EXTRACTOR KIT | 1 | ||
| 98A27004000000A | EXTRACTOR KIT (5IT) | 1 | ||
| 98A27004000000B | EXTRACTOR KIT (5IT) | 1 | ||
| 98A27103000000 | BAR-LOCKING,AILERON CONTROL CABLE TENSION POS.O | 1 | ||
| 98A27104000000 | JIG-NEUTRAL SETTING-LOW SPEED AILERON | 2 | ||
| 98A27203000000 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD (A) | 1 | ||
| 98A27303000000 | BAR-LKG,AIL,ELEV,RUD CTL CA REG | 1 | View Images / Tech Appraisal | |
| 98A27309000000 | GAUGE-ELEVATOR NEUTRAL SETTING | 7 | ||
| 98A27403000000 | MEASURING EQUIPMENT-PITCH TRIM CONTROL OPERATING LOAD | 4 | ||
| 98A27501000000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 1 | ||
| 98A27503000000 | BAR-LOCKING,FLAP CONTR CABLE TENS REGUL IN O POSITION | 3 | View Images / Tech Appraisal | |
| 98A27601000000 | SAFETY COLLAR - SPOILER SERVO CONTROL | 6 | View Images / Tech Appraisal | |
| 98A27603000000 | RIGGING PIN-INNER SPEEDBRAKE SERVO CONTROL INPUT LEVER | 3 | ||
| 98A27604000000 | RIGGING PIN-FLIGHT CONTROLS | 3 | ||
| 98A27801000000 | EQUIPMENT -REMOVAL INSTALLATION,SLAT CONTROL UNIT | 2 | ||
| 98A27803000000 | WRENCH-SLAT SCREWJACK UNLOCKING | 5 | ||
| 98A27804000000 | EXTRACTOR-GIMBAL PIN-SLAT JACK ATTACHMENT | 7 | ||
| 98A27901000000 | PIN-RIGGING,AILERON CONTROL WHEEL | 14 | View Images / Tech Appraisal | |
| 98A27903000000 | FIXTURE-SETTING MICROSWITCH UNIT | 1 | ||
| 98A28101000000 | ADAPTING PIPE - WATER DRAINING FROM FUEL | 26 | ||
| 98A28104000000 | PURGER - WATER DRAIN | 37 | ||
| 98A28203000000 | TEST EQUIPMENT JET PUMP | 8 | View Images / Tech Appraisal | |
| 98A28404000000 | SEQUENCE VALVE ADP TOOL | 1 | ||
| 98A29003000000 | CONNECTORS,HYDRAULIC | 1 | ||
| 98A29103000000 | ASSEMBLY TOOL-HYDRAULIC SEALS | 13 | ||
| 98A29201000000 | PIN-RIGGING,RAM AIR TURBINE DROP-OUT CONTROLS | 9 | ||
| 98A29203000000 | QUADRANT-GRADUATED,RAM AIR TURBINE CONTROL | 5 | View Images / Tech Appraisal | |
| 98A32003000000 | INFLATION KIT-TIRE | 1 | ||
| 98A32030000000 | WEDGE MLG E/CTRL TENSION REG. TOOL | 1 | ||
| 98A32101000000 | TROLLEY-GROUND HANDLING,MAIN LANDING GEAR FOR A300 310 | 4 | ||
| 98A32103000000 | TUG-LIFT - WHEEL REMOVAL MAIN GEAR | 1 | ||
| 98A32203000000 | NOSE LANDING GEAR REMOVAL TROLLEY INSTALLATION EQUIPMT | 6 | ||
| 98A32301000000 | RIGGING PIN | 32 | View Images / Tech Appraisal | |
| 98A32303000000 | WEDGE-LOCKING,M.L.G.EMERGENCY CONT. CABLE TENSION REG | 3 | ||
| 98A3231000000 | POSITION 11 | 1 | View Images / Tech Appraisal | |
| 98A32401000000 | PIN-RIGGING,BRAKING CONTROL | 5 | ||
| 98A32501000000 | RIGGING PIN-STEERING CONTROL | 1 | ||
| 98A32603000000 | EXTENSION-LANDING GEAR SAFETY RELAY | 1 | ||
| 98A32604000000 | RIG PIN | 1 | ||
| 98A3401000000 | RIG PIN.BRAKE. | 1 | ||
| 98A34103000000 | CONTROL-TOOL FUSELAGE | 3 | ||
| 98A34203000000 | GYRO UNIT-ADJUSTMENT TOOL | 1 | ||
| 98A36003000000 | COMPARATOR-THICKNESS | 1 | ||
| 98A49010000000 | RIG PIN TOOL | 1 | ||
| 98A49601000000 | PIN,RIGGING-RAT CONTROL | 4 | ||
| 98A52003000000 | CALIBRATION-STANDARD | 1 | ||
| 98A52301000000 | SAFETY COLLAR | 2 | ||
| 98A53103000000 | HOLDING-PANEL TOOL | 1 | ||
| 98A53153000000 | CALIBRATION STANDARD | 1 | ||
| 98A53403000000 | POST ABEX GEN MOUNTS | 1 | ||
| 98A53601000000 | SLING-R/I,RADOME | 2 | View Images / Tech Appraisal | |
| 98A53603000000 | CALIBRATION-STANDARD | 1 | ||
| 98A53803000000 | DRILL BUSHING | 1 | ||
| 98A54003000000 | FIXTURE DRILL SKIN PL | 1 | ||
| 98A54303000000 | SETTING TOOL-FWD PRESSURE RELIEF DOOR | 1 | ||
| 98A54403000000 | EXTRACTOR SUPSD BY 98A54403023000 | 1 | ||
| 98A54503000000 | SETTING TOOL-AFT PRESSURE RELIEF DOOR | 1 | ||
| 98A54603000000 | FAIR PNLS-FIT INSTALL | 1 | ||
| 98A55103000000 | SUPPORT-TRESTLE | 1 | ||
| 98A55104000000 | DOOR - SLAVE ACCESS | 2 | ||
| 98A55303000000 | HOIST-ASSY FIN | 1 | ||
| 98A56103000000 | SPATULA | 1 | ||
| 98A56301000000 | SLING | 1 | ||
| 98A57003000000 | SILK SCREEN PROCESS | 1 | ||
| 98A57103000000 | REFERENCE BLOCK | 1 | ||
| 98A57203000000 | POSITIONNING AND DRILLING FIXTURE | 1 | ||
| 98A57304000000 | RING-PROTECTIVE-WING MANHOLES RIBS 2-22 | 1 | ||
| 98A57703000000 | SPECIMEN | 1 | ||
| 98A57704000000 | ADAPTOR | 1 | View Images / Tech Appraisal | |
| 98A57804000000 | SLING - SLAT NO 1 | 3 | ||
| 98A57904000000 | SLING-OUTER FLAP | 8 | ||
| 98A71101000000 | ROD | 1 | ||
| 98A71103000000 | PIN,LOCATING-GUIDE BUSH,T-R COWLS | 1 | ||
| 98A76001000000 | PIN RIGGING - THROTTLE CONTROL | 3 | ||
| 98A760010000000 | PIN RIGGING, THROTTLE CONTROL | 1 | ||
| 98A76103000000 | BAR-LOCK.,THROTTLE CONTROL CABLE TENSION REGUL.0 POSI | 5 | ||
| 98A78003000000 | LOCKING PLATE - PWA ENGINE | 1 | ||
| 98A79003000000 | GREASE GUN ASSEMBLY | 10 | ||
| 98A79003000000 ISS C | TOOL | 1 | ||
| 98A79009000000 | GREASE GUN 400CCM | 1 | ||
| 98D07103000000 | DYNAMOMETER-SAFETY STAY | 21 | ||
| 98D07103000000/10 | Load cell+alarm | 1 | ||
| 98D07104000000 | JACKING PAD SET | 11 | ||
| 98D071040000000 | JACK PAD SET, WING | 1 | ||
| 98D07203000000 | MOORING FITTINGS (A320) | 2 | ||
| 98D08003000000 | SET-PLUMB BOBS MLG NLG WHEELS | 2 | ||
| 98D08103000000 | WHEEL TOE-IN LINE BAR | 1 | ||
| 98D09104000000 | TOWING ATTACHMENT | 1 | ||
| 98D10000006000 | COVER | 1 | ||
| 98D10003000000 | COVER-INLET COWL ENGINE | 9 | ||
| 98D1003000000 | Tool | 1 | ||
| 98D10030000000 | TOOL | 1 | ||
| 98D102035000000 | TOOL | 1 | ||
| 98D12303000000 | ENGINE COVER | 1 | ||
| 98D24604000000 A | SPOILER LOCK | 1 | ||
| 98D25003000000 | CONTOUR TEMPLATE 80VU | 1 | ||
| 98D26000000000 | A320/1 CARGO FIRE SYS TEST KIT TOOL | 1 | ||
| 98D26203000000 | CAMBERING TOOL | 1 | ||
| 98D262030000001 | TESTER ENGINE FIRE E | 1 | ||
| 98D27104000000 | GUIDE CONE-AILERON | 7 | ||
| 98D27203000000 | MEASURING EQUIP-RUDD | 2 | ||
| 98D27303000000 | TOOL | 1 | ||
| 98D273030000001 | ELEVATOR PLAY CHECK | 1 | ||
| 98D27403000000 | HOLDING TOOL-TRIM CTL LOWER SHAFT | 10 | ||
| 98D27503000000 | LOAD MEASURING TOOL-FLAP SLAT CTL LEVER | 2 | ||
| 98D27604000000 | COLLAR-SAFETY, SPOILER | 40 | View Images / Tech Appraisal | |
| 98D27604000000-100 | SPOILER ACTUATOR LOC | 1 | ||
| 98D27604000000-SET | SAFETY SPOILER COLLAR-SET OF 5 | 1 | ||
| 98D27803000000 | LOCKING TOOL-FLAP SLAT LEVER,INT. POSITION | 41 | View Images / Tech Appraisal | |
| 98D27803000000-200 | FLAP/SLAT HANDLE SAF | 1 | ||
| 98D278103000000 | LOCKING TOOL | 1 | ||
| 98D27903000000 | TEST UNIT, THS ACTUATOR | 2 | ||
| 98D279035000000 | RIGGING PIN | 1 | ||
| 98D28004000000 | SPANNER-OVERWING FILLER | 16 | ||
| 98D28101000000 | TOOL | 1 | ||
| 98D28104000000 | PIPE ADAPTING-WATER DRAINING | 23 | ||
| 98D32003000000 | GROUND LOCK SYSTEM | 1 | ||
| 98D3203000000 | TOOL | 1 | ||
| 98D32102000000 | PROTECTIVE SLEEVE | 2 | ||
| 98D32203000000 | SPRING ROD-MAINTENANCE TOOL | 2 | ||
| 98D322035000000 | A320 NLG R/INST TOOL | 2 | ||
| 98D32213000000-1 | SPECIAL TOOL | 1 | ||
| 98D32213000000-2 | SPECIAL TOOL | 1 | ||
| 98D32213000000-3 | SPECIAL TOOL | 1 | ||
| 98D32303000000 | ADAPTER-WRENCH | 27 | View Images / Tech Appraisal | |
| 98D32423000000 | BUSH-SPACER | 1 | ||
| 98D32603000000 | SIMULATION PLATE-FLIGHT GROUND | 26 | View Images / Tech Appraisal | |
| 98D340035000000 | KIT PITOT A320 | 1 | ||
| 98D34103000000 | ALIGNMENT,TOOL-IRU PLATFORM BRACKETS | 13 | ||
| 98D34203000000 | ALIGNMENT,TOOL-MOUNT,ADIRU | 12 | ||
| 98D36003000000 | TEST SET-ENGINE BLEED SYSTEM | 5 | ||
| 98D36103000000 | PRESSURE LOSS TEST | 7 | ||
| 98D46003000000 | EFB INSTALLATION | 1 | ||
| 98D52003000000 | FITTING-NLG AFT DOOR REPLACEMENT FIXTURE | 1 | ||
| 98D52208000000 | SLING-CLOSURE,OWEED | 2 | ||
| 98D52303000000 | TOOL-INSTALLATION FWD CARGO DOOR HINGE | 1 | ||
| 98D52603000000 | TOOL | 1 | ||
| 98D52703000000 | CONNECTOR SHUNT | 18 | ||
| 98D53103000000 | COVER-ALPHA PROBE PROTECTIVE | 10 | ||
| 98D53203000000 | SAPCER TUBE NLG BEARING FITTING | 1 | ||
| 98D53303000000 | TEMPLAT DRILL | 2 | ||
| 98D53603000000 | RADOME RADOME UPPER | 1 | ||
| 98D54003000000 | TROLLEY-PYLON R I | 5 | ||
| 98D54403000000 | DUMMY SHACKLES-PYLON TO WING YOKES | 19 | View Images / Tech Appraisal | |
| 98D54503000000 | PYLON REMOVAL-WRENCH | 22 | View Images / Tech Appraisal | |
| 98D56103000000 | SPATULA | 1 | ||
| 98D57004000000 | TOOL KIT RI | 2 | ||
| 98D5703000000 | TOOL | 1 | ||
| 98D57103000000 | DRILL,GUIDE-FOR PRESSURIZED FLOOR FITTINGS | 1 | ||
| 98D57204000000 | DOOR - DUMMY, NACA VENT | 9 | ||
| 98D57304000000 | Extractor-fuse pin | 1 | ||
| 98D7103000000 | DYNAMOMETER | 1 | ||
| 98D71035000000 | TOOL | 1 | ||
| 98D71103000000 | SLING INLET GTF | 1 | ||
| 98D727803000000 | LOCKING TOOL - FLAP SLAT LEVER, INT. POSITION | 1 | ||
| 98D76103000000 | THROTTLE LEVER LOAD MEASURE | 7 | ||
| 98D92103000000 | TOOL | 1 | ||
| 98D92204000000 | HANDLE-INSERTING | 1 | ||
| 98D92403000000 | BRACKET BRACKET INST | 1 | ||
| 98D92503000000 | REMOVAL-INSTALLATION TOOL - RACK 80 VU | 1 | ||
| 98DA28101000000 | TOOL | 1 | ||
| 98F05003000000 | MEASURNG MEASURING, | 1 | ||
| 98F07101000000 | JACK-FRONT | 1 | ||
| 98F07104000000 | JACKING PAD SET-WING SUPSD BY 98F07104000001 | 6 | ||
| 98F071040000002 | TOOL | 1 | ||
| 98F07203000000 | TOOL | 1 | ||
| 98F08203000000 | RODS SIGHTING SET | 3 | ||
| 98F10001000000 | COVER AOA SENSOR | 18 | View Images / Tech Appraisal | |
| 98F10103000000 | COVER-AIR INTAKE COWL | 8 | ||
| 98F10201000000 | MOORING KIT-NLG | 9 | ||
| 98F12303000000 | CONNECTORS-HYDRAULIC | 5 | ||
| 98F20003000000 | TEST RADOM CALIBRATION | 1 | ||
| 98F20203000000 | PROBE | 1 | ||
| 98F21203000000 | R I RECIRCULATION FAN | 1 | ||
| 98F21503000000 | AIR CYCLE MACHINE TOOL | 5 | ||
| 98F23003000000 | CAMERA - LANDSCAPE | 1 | ||
| 98F23703000000 | SWITCH,CABLE-FIBER OPTIC | 2 | ||
| 98F24303000000 | R I BATTERY | 7 | ||
| 98F26203000000 | TEST TOOL - ENG. FIRE EXTINGUISHING SYST.(CF6-80E1) | 7 | ||
| 98F27003000000 | PIN - ACCUMULATOR POS | 18 | View Images / Tech Appraisal | |
| 98F27101000000 | SLING INBOARD AILERON | 1 | ||
| 98F27203000000 | TOOL-RUDDER NEUTRAL ADJUSTMENT | 8 | ||
| 98F27303000000 | CHECK ELEVATOR-FREE PLAY | 4 | ||
| 98F27401000000 | PITCH TRIM CONTROL | 19 | ||
| 98F27503000000 | FLAP PCU-R I TOOL | 3 | ||
| 98F27801000000 | SLAT PCU-R/I TOOL | 1 | ||
| 98F278010000002 | Slat pfcu r/I tool | 1 | ||
| 98F27803000000 | SLAT PCU-R I TOOL | 4 | ||
| 98F27806000000 | SLING SLING - SLAT 1 | 2 | ||
| 98F28203000000 | FUEL FUEL PIPE POSIT TOOL | 3 | ||
| 98F29003000000 | WRENCHES-STANDARD TORQUE SET | 15 | ||
| 98F29103000000 | TEST SET-HYDRAULIC FLUID | 1 | ||
| 98F291035000000 | FILL UNIT NITROGEN | 1 | ||
| 98F29203000000 | COVER-DRILLING TOOL | 1 | ||
| 98F30403000000 | DRAININING-FLUSHING TOOL | 14 | ||
| 98F32101000000 | TOOL R I-MLG DOOR | 7 | ||
| 98F32103000000 | POSITIONING TOOL | 1 | ||
| 98F32104000000 | REM.-INST. TOOL, PINTLE PINS | 8 | ||
| 98F32201000000 | TOOL,R/I-NLG | 1 | ||
| 98F32203000000 | FITTING-ROTATING ROD R/I | 11 | View Images / Tech Appraisal | |
| 98F32204000000 | HANDLING TROLLEY LG | 10 | ||
| 98F32301000000 | TOOL-R I CLG | 6 | ||
| 98F32303000000 | POSITIONING TOOL-MLG UPLOCK | 8 | ||
| 98F32304000000 | TARGET-FALSE | 39 | View Images / Tech Appraisal | |
| 98F32400000003 | Drive tool-wheel tach | 1 | ||
| 98F32404000000 | DRIVE TOOL - WHEEL TACH (GDR) | 1 | ||
| 98F34103000000 | ADAPTER-COVER STATIC PROBE | 17 | ||
| 98F3413000000 | STATIC COVER TEST PR | 1 | ||
| 98F36103000000 | DEACTVATE ENG BL VLVE | 1 | ||
| 98F47103000000 | PALLET INERTING LRB | 10 | ||
| 98F51003000000 | SCREW EXTRACTOR | 1 | ||
| 98F52003000000 | POSITIONER-FITTING, AFT DOOR | 1 | ||
| 98F52803000000 | DRILLING ASSY - SENSOR AND TARGET BRACKET | 1 | ||
| 98F53101000000 | SLING-RADOME | 7 | ||
| 98F53301000000 | WRENCH-SMALL NUT | 9 | View Images / Tech Appraisal | |
| 98F53303000000 | DRILLING TOOL | 1 | ||
| 98F54001000000 | BLANKING PLUG KIT-ENGINE PYLON | 2 | ||
| 98F54003000000 | PYLON SHAFT EXTRACTOR RIB8 RIB14 | 7 | ||
| 98F54403000000 | REMOVAL-INSTALLATION - SPIGOT BALL JOINT | 5 | ||
| 98F54503000000 | PYLON REMOVAL - WRENCHES | 5 | ||
| 98F55003000000 | HTP | 1 | ||
| 98F55104000000 | DOOR-DUMMY, TRIM TANK | 5 | ||
| 98F56103000000 | R I FRONT WINDOW TOOL | 14 | ||
| 98F57004000000 | WING SAFETY ROPE | 1 | ||
| 98F57103000000 | EXTRACTOR-SHOULDER PINS | 8 | ||
| 98F57304000000 | SLING WINGLET ASSEMBLY | 1 | ||
| 98F71103000000 | SLING-INLET COWL | 1 | ||
| 98F76103000000 | THROTTLE-LEVER LOAD MEASURE | 1 | ||
| 98F78003000000 | SLING THRUST REVERSER COWL | 3 | ||
| 98F7801000000 | PFCU SLAT | 1 | ||
| 98G52153000000 | TOOL | 1 | ||
| 98G52403000000 | TOOL | 1 | ||
| 98L05003000000 | MEASUREMENT TARGET SET | 2 | ||
| 98L07101000000 | ADAPTOR-JACK NOSE | 4 | ||
| 98L07103000000 | ADAPTER JACK PAD | 3 | ||
| 98L07203000000 | SHORING KIT | 1 | ||
| 98L08103000000 | RODS,SIGHTING | 1 | ||
| 98L09103000000 | BAR-STEERING,NLG | 2 | ||
| 98L10001000000 | COVER-MFP | 11 | ||
| 98L10201000000 | MOORING,KIT-NLG | 1 | ||
| 98L12003000000 | ACCESS-HUMIDIFIER | 5 | ||
| 98L20003000000 | MULTI ADAPTOR TRIPOD | 3 | ||
| 98L21004000000 | LINK-FIXED | 1 | ||
| 98L21104000000 | TOOL | 1 | ||
| 98L24203000000 | ACCESS,PRIMARY POWER | 1 | ||
| 98L24303000000 | DEVICE,BATTERY REMOVAL INSTALLATION | 9 | ||
| 98L26201000000 | ORIENT-EXTING DISCH HD | 2 | ||
| 98L26203000000 | TEST TOOL-FIRE EXTINGUISHING SYSTEM,RR | 3 | ||
| 98L27003000000 | MULTIPURPOSE LIFTING DEVICE | 5 | ||
| 98L27004000000 | COLLAR - SAFETY, SPOILER ACTUATOR | 3 | ||
| 98L27103000000 | DEVICE-R I,AILERONS | 2 | ||
| 98L27201000000 | TOOL-RUDDER NEUTRAL ADJUSTMENT | 3 | ||
| 98L27301000000 | TOOL-ELEVATOR NEUTRAL ADJUSTMENT | 2 | ||
| 98L27401000000 | LOCKING TOOL,PITCH TRIM SWITCHES | 4 | ||
| 98L27503000000 | ADAPTER,FLAP PCU | 4 | ||
| 98L27601000000 | SHIM-SETTING,SPOILER | 3 | ||
| 98L27603000000 | DEVICE, REMOVAL INSTALLATION - SPOILERS | 1 | ||
| 98L27803000000 | ADAPTER,SLAT PCU | 4 | ||
| 98L27903000000 | KIT,INHIBITION-BPS | 2 | ||
| 98L28004000000 | PROTECTOR - FUEL LINE | 1 | ||
| 98L28201000000 | Adapter drain vent valve APU | 1 | ||
| 98L28203000000 | PROTECTOR,FUEL PIPE | 2 | ||
| 98L29003000000 | WRENCH,HP MANIFOLD FILTER | 2 | ||
| 98L29103000000 | DEVICE,REMOVAL INSTALLATION-HP MANIFOLD | 1 | ||
| 98L29203000000 | DEVICE,REMOVAL INSTALLATION-EMP | 2 | ||
| 98L32001000000 | FILLING KIT-GEAR SHOCK ABSORBER AC ON WHEELS | 7 | ||
| 98L32003000000 | KIT,GEAR FILLING-SHOCK ABSORBER,AC ON JACKS | 10 | ||
| 98L32101000000 | DEVICE,REMOVAL INSTALLATION-DRAG STAY,BLG | 1 | ||
| 98L32101002000-000 | TOOL | 1 | ||
| 98L32103000000 | R/I UPLOCK,BLG | 1 | ||
| 98L32104000000 | PINTLE - ALIGNMENT TOOL, WLG | 1 | ||
| 98L32201000000 | WINCH-R I NLG LEG | 1 | ||
| 98L32203000000 | DEVICE,REMOVAL INSTALLATION-NLG DOORS | 2 | ||
| 98L32204000000 | PIN, RIGGING - NLG UPLOCK | 2 | ||
| 98L32401000000 | KIT, INFLATION - WHEELS | 1 | ||
| 98L32404000000 | TOOL - DRIVE, WHEEL TACHO | 7 | ||
| 98L34001000000 | SUPPORT TOOL-STANDBY COMPASS CALIBRATOR | 5 | ||
| 98L34103000000 | CLEANER, MFP PITOT | 11 | ||
| 98L36103000000 | EXCHANGER PRECOOLER | 12 | ||
| 98L46003000000 | PORTABLE MAINTENANCE ACCESS TERMINAL | 1 | ||
| 98L52003000000 | BARRIER,SAFETY-UPPER DECK DOOR | 4 | ||
| 98L52403000000 | COMPRESS TOOL-DOOR JACK | 1 | ||
| 98L53103000000 | DEVICE,REMOVAL INSTALLATION-RADOME | 3 | ||
| 98L54001000000 | WRENCH SET,PYLON REMOVAL INSTALLATION | 2 | ||
| 98L54003000000 | ADAPTER,DYNAMOMETRIC NDT RR EA | 1 | ||
| 98L54503000000 | EXTRACTOR,SET-BUSH | 2 | ||
| 98L56103000000 | TOOL | 1 | ||
| 98L57003000000 | ACCESS-DOOR 3 | 2 | ||
| 98L57004000000 | TURN BARREL | 1 | ||
| 98L57103000000 | EXTRACTOR,SHOULDER PINS | 2 | ||
| 98L57304000000 | HOIST-WING TIP | 3 | ||
| 98L57703000000 | TOOL SET,BRIDGE PLATE BEARING | 1 | ||
| 98L71003000000 | Bootstrap A380 | 3 | ||
| 98L71203000000 | WRENCH SET,TORQUE-RR(MSN 1,2,4 AND 7 ONLY) | 2 | ||
| 98L72003000000 | ADAPTOR, MULTY - RR | 1 | ||
| 98M56103000000 | R/I armour windows | 1 | ||
| 98R57000000000 | REPAIR REPAIR SET (RIB.5) | 1 | ||
| 98R57000000040 | CRADLE RIB 5 RH | 1 | ||
| 98R57000000041 | CRADLE RIB 5 LH | 1 | ||
| 98RC1000000949 | INLET | 1 | ||
| 98RC1000000959 | INLET | 1 | ||
| 98RC1000000969 | INLET | 1 | ||
| 98RC1000000979 | INLET | 1 | ||
| 98RC1000000989 | INLET | 1 | ||
| 98S05505000000 | EXTENSION | 1 | ||
| 98S06003000000 | Theodolite Wing Sup Assy | 1 | ||
| 98S07003000000 | Aft Fus/Wing Jack Adapter | 3 | ||
| 98S07105000000 | NLG DUMMY | 1 | ||
| 98S10005000000 | MLG Stop Block | 5 | ||
| 98S10008000000 | GROUND MOORING KIT | 1 | ||
| 98S100080000000 | GROUND MOORING KIT ( | 1 | ||
| 98S10205000000 | Ground Mooring Kit | 2 | ||
| 98S12003000000 | Water Drain Purging Tool | 12 | ||
| 98S12005000000 | Tension Bolt Removal Tool | 4 | ||
| 98S21305000000 | Tool I/F ADC-Vacuum Pump | 1 | ||
| 98S24005000000 | Suitcase of Electrical Sup | 5 | ||
| 98S24905000000 | Suitcase of Bonding Jumper | 4 | ||
| 98S24905000000-CAL | Calibration - Electronic Bonding Kit | 1 | ||
| 98S25103000000 | TOOL | 1 | ||
| 98S25205000000 | Tool for Seal Placement | 4 | ||
| 98S26005000000 | Class "C" C Compartmt Test | 6 | View Images / Tech Appraisal | |
| 98S27050000000 | AILERON ACTUATOR SUPPORT FITTING | 1 | ||
| 98S27105000000 | Trim Tab Support Drilling | 2 | ||
| 98S27303000000 | TEST TOOL | 1 | ||
| 98S27305000000 | WRENCH | 2 | ||
| 98S27505000000 | Bundle of Transmitter 16CV | 5 | ||
| 98S27603000000 | Dummy Spoiler Valve Block | 11 | View Images / Tech Appraisal | |
| 98S29003000000 | SETTING UNIT HYD PRESSURE | 2 | ||
| 98S29103000000 | Press XMTR/OVHT Sensor | 6 | ||
| 98S31005000000 | Harness Incidence Sensor | 10 | ||
| 98S31005000000-CAL | Calibration - Alpha Probe Harness | 1 | ||
| 98S31305000000 | Harness Position Transmet | 5 | ||
| 98S31405000000 | MFC Phobos Software | 1 | ||
| 98S32003000000 | Anti - Skid Adjust Tool | 5 | ||
| 98S32005000000 | NLG Steering Alignment | 9 | ||
| 98S32405000000 | Low Press Brk Sys Purging | 10 | ||
| 98S34003000000 | TOOL SET | 1 | ||
| 98S34005000000 | Alpha Probe Locator Set | 11 | View Images / Tech Appraisal | |
| 98S34203000000 | TOOL COMPENSATION SYNCHROMETER | 3 | ||
| 98S34203000000-CAL | Calibration - Tool Compensation Synchrometer | 1 | ||
| 98S34405000000 | T2CAS Adapter Cable | 3 | ||
| 98S35105000000 | Oxygen Leak Check Tool | 3 | ||
| 98S36003000000 | BLANKING CAP | 1 | ||
| 98S37305000000 | SPECIAL EXTENSION "J" | 1 | ||
| 98S45105000000 | PMAT 2000 Adapter Cable | 2 | ||
| 98S52005000000 | Class "C" C. Door Air Test | 3 | View Images / Tech Appraisal | |
| 98S52403000000 | Service Door Safety Pin | 2 | ||
| 98S52405000000 | BROOCH DOOR SERVICES | 1 | ||
| 98S53005000000 | TOOL | 1 | ||
| 98S53205000000 | Passenger Vacuum Cap | 11 | ||
| 98S53605000000 | TOOL | 1 | ||
| 98S53905000000 | DRILLING TOOL | 1 | ||
| 98S53912000000 | TOOL | 1 | ||
| 98S54205000000 | Flatness Checking Tool | 3 | ||
| 98S55005000000 | Rudder/Elevator Balancing | 4 | ||
| 98S55105000000 | EXTRACTOR | 1 | ||
| 98S55403000000 | TOOL | 1 | ||
| 98S57105000000 | CALIBER | 1 | ||
| 98S57203000000 | CALIBER | 1 | ||
| 98S57205000000 | Extracteur ferrure ar.panneaux extrados demontable caisson extreme N.13 | 2 | ||
| 98S57503000000 | LOWER SURF | 1 | ||
| 98S57505000000 | Cam Guide Replacement Tool | 5 | ||
| 98S57605000000 | CASE | 1 | ||
| 98S61003000000 | PROPELLER LIFTER | 4 | ||
| 98S61005000000 | Setting Tool - PCU | 9 | View Images / Tech Appraisal | |
| 98S61205000000 | APC Data Connecting Tool | 1 | ||
| 98S71003000000 | FIXTURE ENG PROP RI | 2 | ||
| 98S71005000000 | Key Wrench Alternator | 12 | ||
| 98S71205000000 | Engine Mount Torque Wrench | 11 | View Images / Tech Appraisal | |
| 98S76000000000 | HMU/PCU ASSY PIN | 1 | ||
| 98S79003000000 | DRAINAGE | 1 | ||
| 98S79005000000 | Oil Engine Draining Cplg | 6 | ||
| 98S79305000000 | WRENCH | 1 | ||
| 98V06001000000 | MEASUREMENT TARGETS | 3 | ||
| 98V07101000000 | JACKING NOSE FITTING | 6 | ||
| 98V07104000000 | ADAPTOR - WING JACKING | 1 | ||
| 98V07203000000 | SHORING KIT | 1 | ||
| 98V08103000000 | SIGHTING RODS | 4 | ||
| 98V09101000000 | TOWBAR A-350 | 1 | ||
| 98V09103000000 | BAR STEERING NOSE WHEEL | 3 | ||
| 98V10001000000 | Chock MLG，engine run up | 1 | ||
| 98V10201000000 | MOORING KIT NLG | 5 | ||
| 98V12003000000 | NLG BAY ACCESS PLATFORM | 3 | ||
| 98V20003000000 | ELEVATOR PLATFORM | 2 | ||
| 98V21503000000 | R/I VCRU | 7 | ||
| 98V24003000000 | TOOL | 1 | ||
| 98V24203000000 | RI RAT | 5 | ||
| 98V25003000000 | PROTECTION KCCU | 3 | ||
| 98V26203000000 | TEST FES ENGINE | 1 | ||
| 98V26213000000 | FIRE EXT CART TEST | 1 | ||
| 98V27003000000 | PFC RIGGING TOOL | 3 | ||
| 98V27004000000 | R/I TOOL - AILERON ACTUATOR | 5 | ||
| 98V27103000000 | TOOL | 1 | ||
| 98V27201000000 | TL - RUD NEUTRAL ADJMT | 4 | ||
| 98V27301000000 | ELEVATOR NEUTRAL SETTING | 5 | ||
| 98V27401000000 | LOCK TOOL - PITCH TRIM SWITCHES | 8 | ||
| 98V27503000000 | R/I FLAP PCU | 6 | ||
| 98V27801000000 | CONTROL LEVER FLAP SLAT | 10 | ||
| 98V27803000000 | R/I SLAT PCU | 5 | ||
| 98V29003000000 | Draining emp line | 3 | ||
| 98V29103000000 | RI - EMP YELLOW RESERVOIR | 2 | ||
| 98V32001000000 | GEAR FILLING KIT - S/ABS A/C ON WHEELS | 1 | ||
| 98V32004000000 | MLG R/I TOOL | 1 | ||
| 98V32103000000 | NLG UPLOCK DEBOGGING TOOL | 1 | ||
| 98V32104000000 | MLG REMOVAL / INSTALLATION TOOL | 4 | ||
| 98V32201000000 | R/I TOOL - NLG LEG | 4 | ||
| 98V32203000000 | R-I FWD NLG DOORS MSN1 | 1 | ||
| 98V32403000000 | R/I SIM | 3 | ||
| 98V32404000000 | DRIVE TOOL - WHEEL TACHO | 4 | ||
| 98V36003000000 | R/I - PCE | 5 | ||
| 98V46203000000 | WIRED GATELINK CABLE | 1 | ||
| 98V51003000000 | KIT R/I RETAINERS KIT | 1 | ||
| 98V52203000000 | CPRSR-JACK,CKPT HATCH | 3 | ||
| 98V52403000000 | DOOR CPRSR-JACK AVNCS DOOR | 4 | ||
| 98V53003000000 | CWB MANHOLE ACCESS | 2 | ||
| 98V53103000000 | R/I RADOME | 4 | ||
| 98V54503000000 | EXTR SET BUSH - PYLON | 2 | ||
| 98V56003000000 | R/I - WINDOWS SHIELDS | 4 | ||
| 98V56103000000 | POSIT. PRESS WINDOW | 3 | ||
| 98V57004000000 | MAIN FITTING LIFTING SLING - RECOVERY | 1 | ||
| 98V57103000000 | CWB PROTECT CARPET | 2 | ||
| 98V57304000000 | SLING - WINGLET | 2 | ||
| 98V71203000000 | WRENCH SET | 1 | ||
| 98V72003000000 | RI FAV | 5 | ||
| 99-9000-0000 | Mobile Waste Tank | 1 | ||
| 99000D27800000000 | Slats & flaps security tools | 1 | ||
| 99000F27901000000 | TOOL ASC | 1 | ||
| 99A22103000000 | CABLE-EXTENSION FOR CONNECTOR 163VCA | 1 | ||
| 99A28404000000 | ADAPTOR-SEQUENCE VALVE | 12 | ||
| 99A31103000000 | TEST 429VU | 1 | ||
| 99A31403000000 | SIMULATOR - EPR LIMIT | 2 | ||
| 99A34103000000 | COVER-BLANKING , STATIC PORT | 9 | View Images / Tech Appraisal | |
| 99A34201000000 | SIMULATOR-ATTITUDE SYSTEM | 1 | ||
| 99A34203000000 | SIMULATOR-POSITION AOA SENSOR | 2 | ||
| 99A51003000000 | STANDARD, REFERENCE | 2 | ||
| 99A53203000000 | REFERENCE STANDARD | 1 | ||
| 99A53403000000 | CALIBRATION STANDARD | 1 | ||
| 99A53803000000 | STANDARD-REFERENCE | 1 | ||
| 99A54403000000 | SPECIAL TOOL | 1 | ||
| 99A57103000000 | STANDARD-REFERENCE | 1 | ||
| 99A57303000000 | REFERENCE STANDARD | 1 | ||
| 99A57703000000 | STANDARD-REFERENCE | 2 | ||
| 99A76101000000 | PIN-RIGGING MAIN ENGINE CONTROL | 2 | ||
| 99A761010000000 | PIN-RIGGING, MAIN ENGINE CONTROL | 1 | ||
| 99A79003000000 | ENGINE OIL PRESSURE SIMULATOR | 1 | ||
| 99D24003000000 | PLUG-ELECTRICAL TEST | 2 | ||
| 99D31303000000 | MAINTENANCE FILTER TOOL | 1 | ||
| 99D53103000000 | STANDARD-REFERENCE | 5 | ||
| 99D53203000000 | STANDARD-REFERENCE | 1 | ||
| 99D54403000000 | STANDARD-REFERENCE | 1 | ||
| 99D57004000000 | CALIBRATION STANDARD | 4 | ||
| 99D57103000000 | CALIBRATION-STANDARD | 1 | ||
| 99F27901000000 | SLAVE TOOL - SERVOCONTROL | 1 | ||
| 99F28304000000 | DUMMY PLUG | 8 | ||
| 99F283040000000 | DUMMT PLUG | 1 | ||
| 99F53103000000 | STANDARD REFERENCE | 3 | ||
| 99F53113000000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99F53303000000 | REFERENCE STANDARD | 1 | ||
| 99F54403000000 | REFERENCE STANDARD | 1 | ||
| 99F54503000000 | STANDARD, REFERENCE | 2 | ||
| 99F57203000000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-20-84 Page 409 Figure 403. Material: 7175-T7. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99F57603000000 | REFERENCE STANDARD | 1 | ||
| 99L52103000000 | AIRBUS REFERENCE STANDARD A380 52-81-01-991-012-A. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L52323000000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53103000000 | NDT NDT CALIBRATION BLOCK | 1 | ||
| 99L53303000000 | AIRBUS REFERENCE STANDARD A380 53-31-37-991-006-A. Material: 2024-T3 or Equivalent. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L54503000000 | AIRBUS A380 REFERENCE STANDARD FIGURE:54-51-04-991-012-A. MATERIA L: 600/700 SERIES INCONEL. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L57203000000 | AIRBUS REFERENCE STANDARD A380 FIGURE 57-21-10-991-003-A. MATERIAL: 7175 OR EQUIVALENT. Includes Test Report and Certificate of Conformance. | 1 | ||
| 99L57603000000 | AIRBUS REFERENCE STANDARD A330-200F 57-61-21-991-006-A PAGE 1. . lncludes Certificate of Conformance. | 1 | ||
| A28104000000 | TOOL | 1 | ||
| A2810400000000 | TOOL | 1 | ||
| A300-34-00-00-0011 | INSPECTION TOOL-PITOT PROBES | 1 | ||
| A523-71000-000W8200-01-00 | TOOL | 1 | ||
| A523-71000-000W8300-05 | ADPATER FOR SLING MDCD A330P2F | 1 | ||
| Alt: 98D07103000000 | SAFETY | 1 | ||
| AVIA-98V27801000000 | CONTROL LEVER FLAP SLAT | 1 | ||
| AW-98A28104000000 | Purger Water Drain | 1 | ||
| AW-98S12003000000 | WATER DRAIN TOOL | 1 | ||
| BC3000-0001 | ANALYZER / TESTER | 1 | ||
| BC3000-0003 | BATTERY CAPACITY ANALYZER : BC3000-0003 | 3 | ||
| C02160000-001-HFIX | APU EXHAUST MUFFLER REMOVAL AND INSTALLATION | 1 | ||
| CA875000-0004 | COVER RIGHT ANGLE OF ATTACK | 1 | ||
| CFD145000000 | Engine Cradle RB211 | 1 | ||
| D0003000000800 | POTENTIOMETRE 9007A | 6 | ||
| D2157160000000 | BELLOWS | 1 | ||
| D2308000000 | TOOL | 1 | ||
| D23156000000 | TOOL | 1 | ||
| D274-00000-000L9600-01-00-102 | Rigging pins | 1 | ||
| D274-00000-000L9600-01-00-103 | Rigging pins | 1 | ||
| D290-13000-000W4870-81A00 | TOOL | 1 | ||
| D533-11000-000W6400-82A00 | TOOL | 1 | ||
| D534-74000-000-W8200-81A0004-00-401 | Section Trolley 11-14 Fuselage Supporting Plate-07 | 1 | ||
| D534-74000-000-W8200-81A0004-00-402 | Section Trolley 11-14 Fuselage Supporting Plate-08 | 1 | ||
| D534-74000-000-W8200-81A0007-00-200 | Section Trolley 11-14 Fuselage Supporting Plate-09 | 1 | ||
| ELT96A 9800 000 003 | PROGRAMMING TOOL | 2 | View Images / Tech Appraisal | |
| ELT96A2560000000 | ELT-EMERG LOCATOR BEACON | 1 | ||
| ELT96A9800000000 | Emergency Location Transmitter− Programming (French) | 2 | ||
| ELT96A9800000000(FR) | ELT Programming Unit | 1 | ||
| ELT96A9800000001 | Emergency Location Transmitter− Programming (English) | 1 | ||
| ELT96A9800000001(EN) | ELT Programming Unit | 1 | ||
| ELT96A9800000003(FR/EN) | ELT Programming Unit | 1 | ||
| ELT96A9800000004 | PROGRAMMING TOOL | 7 | ||
| ELT96A9800000004-SW | ELT Programming Unit | 1 | ||
| ELT96A980000001 | Tool-Progr.Elt,English Vers | 1 | ||
| ELT96A980000004 | ELT PROGRAMMING UNIT | 1 | ||
| ELT96A980000004-SW | ELT PROGRAMMING SOFTWARE | 1 | ||
| F0003210000000 | TOOL | 5 | ||
| F3215502000000 | PIN ASSY ‐ REAR PINTLE (LH) | 1 | ||
| F32304000000 | TARGET - FALSE | 1 | ||
| F383R4470-000-00 | TOOL | 1 | ||
| F523-71000-000W6400-01 | INSTALLATION DEVICE CYLINDER FREIGHT GATE | 1 | ||
| F523-R1100-000-000W6400-01 | INSTALLATION DEVICE MDCD - HOOKS | 1 | ||
| F96000F25010000000 | R0Ulette a joint | 1 | ||
| F98101F92511000000 | TOOL | 1 | ||
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | ||
| FE296000000 | ENSEMBLE CARTE | 1 | ||
| FE339000000 | IN/OUTPUT UNIT AILERON LH | 1 | ||
| G1351960000000 | GROUND TEST UNIT-RAT | 1 | ||
| H1000-000 | COCKPIT COVER | 1 | ||
| HC132H0000-000 | NOSE GEAR LIFTING TOOL | 1 | ||
| HIM205000000 | CASE NO FOAM | 1 | ||
| HIM210000000 | CASE NO FOAM | 1 | ||
| HIM210000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM220000000 | CASE NO FOAM | 1 | ||
| HIM220000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM230000000 | CASE NO FOAM | 1 | ||
| HIM230000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM240000000 | CASE NO FOAM | 1 | ||
| HIM240000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM250000000 | CASE NO FOAM | 1 | ||
| HIM250000001 | CASE CUBED FOAM | 1 | ||
| HIM250000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM260000000 | CASE NO FOAM | 1 | ||
| HIM260000001 | CASE CUBED FOAM | 1 | ||
| HIM260000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM270000000 | CASE NO FOAM | 1 | ||
| HIM270000001 | CASE CUBED FOAM | 1 | ||
| HIM270000002 | CASE PADDED DIVIDERS | 1 | ||
| HIM272000000 | CASE NO FOAM | 1 | ||
| HIM275000000 | CASE NO FOAM | 1 | ||
| HIM295000000 | CASE | 1 | ||
| HIM310000000 | CASE NO FOAM | 1 | ||
| HIM310000001 | CASE SOLID FOAM | 1 | ||
| HIM320000000 | CASE NO FOAM | 1 | ||
| HIM330000000 | CASE NO FOAM | 1 | ||
| HIM330000001 | CASE SOLID FOAM | 1 | ||
| IAS-000000135 | GENX 2B KIT, ENGINE PRESERVATION | 1 | ||
| IAS-000000369 | TOOL | 1 | ||
| IAS-000000412 | GEnX 11C455P05 MOD kit converts 11C4552P03 to 11C4552P05 | 1 | ||
| IAS-000000452 | GENX P06 MOBILITY KIT CASE | 1 | ||
| IAS-000000489 | GENX 1B/2B ON WING ENGINE PRESERVATION KIT | 1 | ||
| IAS-000000555 | GEnX 1B/2B (KIT , UPGRADE - PRESERVATION) converts 11C4552P03 to 11C4552P06 | 1 | ||
| IZ00-01-35-2000-000 | Eslinga (estructura fuselaje) | 1 | ||
| IZ00-04-35-51000-0001 | Esliga planta potencia | 1 | ||
| L1673-20/000/000 | SELFTEST ADAPTER 200mOhm | 1 | ||
| L1673-6/000/000 | SELFTEST ADAPTER 10mOhm | 1 | ||
| L2556966000000 | PANEL-PRESSURE TEST,CRC | 1 | ||
| MD400-00000-1 | WHEEL LOAD SCALES | 1 | ||
| ME1536A2070-000-001ME2 | TOOL | 1 | ||
| MTAX-01-212-21000-0001 | Boring/Reaming Tool, NLG Support | 1 | ||
| N40-1A10000-001 | SUPPORT-BRACKET | 1 | ||
| NM-0000-0014001 | SEALING RING | 1 | ||
| OO00009584 | VALVULA MANUAL 3 VIAS PT | 1 | ||
| P5004178000000 | LVDT; E-Z020-276 PV PUMP | 1 | ||
| PG926821-000000 | TEST FIXTURE | 1 | ||
| ph1407211000-000 | DEVICE, MEASUREMENT TEST - BACKLASH | 1 | ||
| R1110000-003 | TOOL | 1 | ||
| RTA535000000154 | FITTING FITTING | 1 | ||
| RTA535000000156 | FITTING FITTING | 1 | ||
| RTA535000000157 | FITTING FITTING | 1 | ||
| SEC720000001 | TOOL | 1 | ||
| SEC720000001all | TOOL | 1 | ||
| SEC720000003A11 | Tool for removing rear oil cap | 1 | ||
| SEC7200000067B-3 | TOOL | 1 | ||
| SEC7200000067B-7B | TOOL | 1 | ||
| STP-000000165 | CLAMP | 1 | ||
| T000896900-00000X01 | Fuel Bracket 98 | 1 | ||
| T54535001000000 | DRILLING LH DRILLING KIT | 1 | ||
| T54535003000000 | DRILLING RH DRILLING KIT | 1 | ||
| T792992030000000D | PURGING TOOL WATER DRAIN, FUEL | 1 | ||
| T792992045000000H | PURGING TOOL SKYDROL DRAIN | 1 | ||
| TRSV.01F78AH00.00000.00 RHS | Hold Open Rod R/H - Trent 500 | 1 | ||
| TRSV.01F78AH00.00000.00LHS | Hold Open Rod L/H - Trent 500 | 1 | ||
| TRSV01F71AC00-00000-00 | Hold open brace LHS | 1 | ||
| TRSV01F78AH00-00000-00 | Hold open rod LHS | 1 | ||
| TRSV01F78AH50-00000-00 | Hold open rod RHS | 1 | ||
| UA0257040000000 | DUMMY FILTER ELEMENT | 1 | ||
| UA7119000000000 | CONNECTION BLOCK | 1 | ||
| UAA025080000000 | LP CHECK VALVE | 1 | ||
| UAA025090000000 | TOOL-OPENING TEST | 1 | ||
| UAA025130000000 | LP CHECK VALVE | 1 | ||
| UAA026430000000 | LP CHECK VALVE TOOL-OPENING TEST | 1 | ||
| UAA026610000000 | LP CHECK VALVE TOOL-OPENING TEST | 1 | ||
| UAA026640000000 | LP CHECK VALVE TOOL-OPENING TEST | 1 | ||
| UAA027300000000 | LP CHECK VALVE TOOL-OPENING TEST | 1 | ||
| UCA022410000000 | VALVE ASSEMBLY TEST TOOL | 1 | ||
| UCA022420000000 | VALVE ASSEMBLY TEST TOOL | 1 | ||
| UM0118050000000 | PIN WRENCH FOR BYPASS VALVE | 1 | ||
| UM6989030000000 | PICK-OFF PLUGS OR TEST PLATE | 1 | ||
| UR0118010000000 | PRESSURE PICK-OFF PLUGS | 1 | ||
| UZ0118040000000 | PIN WRENCH FOR BOWL | 1 | ||
| UZ0341020000000 | PIN WRENCH FOR BOWL | 1 | ||
| UZ9605010000000 | PRESSURE TEST PLATE | 1 | ||
| UZA014470000000 | VALVE ASSEMBLY TOOL | 1 | ||
| UZA022400000000 | VALVE,ASSEMBLY | 1 | ||
| UZA022410000000 | BY-PASS VALVE COMPRESSION TOOL | 1 | ||
| UZA024210000000 | VALVE-REMOVE INSTALLATION TOOL | 1 | ||
| UZA030900000000 | TOOL REPRESENTING 100% CLOGGED FILTER ELEMENT | 1 | ||
| V07005500000080 | Tire pressure gauge | 1 | ||
| VL500Y000000000 | DEVICE-ADJ, RDNG LGHTS | 1 | ||
| X0330.00.0000.00 (x2) | Alenia C-27J Wing / Main Jack | 1 | ||
| X97D21503000000 | TEST TOOL, DUAL SPEED FANS | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
