| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00 111 | CHUCKING REAMERS 1/4 | 1 |
Partial Match
| Part Number | Description | Sources Available | Images | Tool Request Qty |
|---|---|---|---|---|
| G600-1000001-11 | COVER | 1 | ||
| (CALIB) 01-1001-11 | TOOL | 1 | ||
| (CALIB) 98F07203000111 | FITTING FITTING-FR.59 RH (CALIBRATION) (CALIBRATION) | 1 | ||
| 001112-130-25 | INSERT/EXTRACT TOOL | 1 | ||
| 001112-200-25 | INSERT/EXTRACT TOOL | 1 | ||
| 00111223025 | INSERT / EXTRACT TOOL | 1 | ||
| 0011153-503 | COLLAR, FLIGHT SPOILER SAFETY | 1 | ||
| 01-1187-0011-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 01-1201-0011-10 | TOWBAR: INCLUDING OPTION, | 1 | ||
| 01-1229-0011-10 | KIT: OPTION,3IN ID EYEBOLT, | 1 | ||
| 01-1277-0011-10 | OPTION: 3 ID EYEBOLT, | 1 | ||
| 02-1040-0111 | JACK: TRIPOD,HYD,10TON, 42X43X49IN,340LB | 4 | ||
| 02-1240-0111 | Jack, Tripod 12 Ton | 2 | ||
| 02-2560-0111 | Jack, Tripod 25 Ton | 2 | ||
| 02-2560-0111-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02-7810-0111 | Jack, Tripod 12 Ton | 1 | ||
| 02-7810-0111-01 | OPTION: PNEUMATIC AIR PUMP, | 1 | ||
| 02A1040-0111 | Jack, Tripod 10 Ton | 1 | ||
| 02A1240-0111 | Jack, Tripod 12 Ton | 1 | ||
| 02A2560-0111 | TRIPOD JACKS | 3 | ||
| 02A7810-0111 | JACK: TRIPOD 12 TON W/ AIR, | 1 | ||
| 04-6001-1100 | PLATFORM - GENERAL MAINTENANCE | 6 | ||
| 04-6001-1100A9 | PLATFORM: MAINTENANCE,W/AIR PUMP, | 1 | ||
| 04-6001-1100B3 | STAND SAFETY YELLOW, | 1 | ||
| 04-6001-1100B7 | PLATFORM, MAINT MODIFIED, | 1 | ||
| 04-6001-1100B9 | PLATFORM: MAINTENANCE,W/GATE, | 1 | ||
| 04-6001-1100CA | Platform, Maintenance | 1 | ||
| 046-P100-111 | TOOL | 1 | ||
| 063100111511 | MANOMETER | 1 | ||
| 0U300111 | PRECASTING BUSH | 1 | ||
| 1001-11 | Special Purpose Crimp Tool | 2 | ||
| 1001-115 | GENERATOR SWEEP | 1 | ||
| 100111071701 | MANOMETER | 1 | ||
| 1001110810 | MANOMETER | 1 | ||
| 1001110817 | MANOMETER | 1 | ||
| 1001115919 | SWITCH: PUSH-BUTTON,ENABLE, | 2 | ||
| 1001117177 | SWITCH: NEOPRENE BOOT, | 2 | ||
| 10011181 | KIT PICO AGUJA 1.40 | 1 | ||
| 109- 3900-01-11 | HOISTING RING, MAIN TRANSMISSION | 1 | ||
| 109-3130-01-113 | T/R STATIC BALANCE TOOL | 1 | ||
| 109-3130-01-113 T/R | STATIC BALANCE TOOL | 1 | ||
| 109-3130-01-117 | TOOL,BALANCING,TAIL ROTOR | 1 | ||
| 109-3130-01-119 | TAIL ROTOR STATIC BALANCING TOOL | 1 | ||
| 110011108 | MANOMETER | 1 | ||
| 1159H20011-16 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 1159SEM30001-11 | AXLE JACK ADAPTER | 1 | ||
| 125-001113-01 | PROJECTOR,MULTIMEDIA | 1 | ||
| 139-00-111-00 | END CAP | 1 | ||
| 1660-001-110 | CASE PELICAN | 1 | ||
| 189A1001-11 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 2000111 | TEST FIXTURE | 1 | ||
| 2001115 | WASTE Y-COUPLER W/ GA ADAPTER, WYE, 4-INCH.(FOR DASH-8 ATR MANUAL LAVATORY CART). | 1 | ||
| 2001116 | LAVATORY COUPLER PLUG, 4-INCH | 1 | ||
| 2001119 | B-4 Maintenance Stand: 37" to 87" Platform height, 3' x 7' platform deck, 750 lb. capacity. Manual hydraulic pump. Locking casters. | 2 | ||
| 2052000111 | AIRCRAFT JACK, MAIN | 1 | ||
| 212-42000-11-1 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 247001-11 | OHMETER, DIGITAL, LOW RESISTANCE | 1 | ||
| 287001-1-1 | NOGO GAGE | 1 | ||
| 2PME311N5001-11 | CASTER WELDMENT | 1 | ||
| 30-900-1111 | Sylvac 30-900-1111 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | ||
| 30-900-1112 | Sylvac 30-900-1112 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | ||
| 300-1110 | Pitot Pre-Test & Assembly Integrity Fixture | 1 | ||
| 3170011-1 | NOSE LANDING GEAR PISTON HEAD PULLER | 1 | ||
| 32090.0111 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 32850.0111 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 347-3001-11GSE | PINS, LOCKOUT-THRUST REVERSER | 2 | ||
| 362-001-115-0 | TGB | 1 | ||
| 362500-1-11HM-2 | LIFT ASSY., GEAR BOX, ENGINE | 1 | ||
| 400-1-1/16 | Chucking Reamers Carbide Tipped Straight Shank Straight Flute (Type: Straight Flute) (Shank: Straight) (Size/diameter: #1) (Decimal equivelant: .2280") (Add to cart: Contact us to order) (Type: Straight Flute) (Shank: Straight) (Size/diameter: 1) (Decimal | 1 | ||
| 407-015-001-111 | BLADE ASSY, MAIN ROTOR | 1 | ||
| 412-240-011-100 | CLAMP (GEARBOX) | 1 | ||
| 412-240-011-101 | Backlash Clamp Set (412-240-011-101) | 1 | ||
| 412-240-011-103 | CLAMP TOOL | 1 | ||
| 412-240-011-111 | STUD | 1 | ||
| 4256-0011-102 | Rod | 1 | ||
| 4920-01-112-4939 | CLAMP ASSEMBLY, BLADE^2^ | 1 | ||
| 4920011101429 | 4920011101429 | 1 | ||
| 4920011108092 | ADAPTER TEST SET | 1 | ||
| 4930-01-114-2121 | GREASE GUN | 1 | ||
| 5001-112-2 | RETAINING RING | 1 | ||
| 600-111 | DOGHOUSE/MAIN INTAKE/ENGINE AREA COVER (a/c models) | 1 | ||
| 6001112-100 | FUEL FLUSHING TROLLEY | 1 | ||
| 6001114-001 | OIL FILTER WRENCH | 1 | ||
| 6001119-001 | GAUGE MANIFOLD 134A | 1 | ||
| 6200-11/16-BN-BNC | PROBE 11/16 INCH (FOR STEEL) | 1 | ||
| 64001-1100 | Hand Crimp Tool | 1 | ||
| 641-00111 | VALVE: METERING,1811 SERIES, | 2 | ||
| 674-00111 | ORING, | 1 | ||
| 680011-1 | DIE SET | 1 | ||
| 6F6700H00111A651A | RVDT RIGGING PIN | 1 | ||
| 6ME65B02200-1-11 | ROD END ASSY-RH | 1 | ||
| 7-663300111-601 | INSP. AND TEST SET | 1 | ||
| 700-1-1/16 | Chucking Reamers High Speed Steel Straight Shank Straight Flute (Type: Straight Flute) (Shank: Straight) (Size/diameter: #1) (Decimal equivelant: .2280") (Add to cart: Contact us to order) (Type: Straight Flute) (Shank: Straight) (Size/diameter: 1) (Decim | 1 | ||
| 72P7100111-SF | INLET & THRUST REVERSER DOLLY | 1 | ||
| 78100011158 | UNDERWATER ACCOUSTIC BEACON TEST SET, REF: DUKANE, TS200 | 1 | ||
| 800111-6.1 | PIN | 1 | ||
| 8060-001-110 | PELICAN 8060 LED FLASHLIGHT | 1 | ||
| 81200111 | 98VA HD 8DWR ROLL CAB BLUE | 1 | ||
| 895-3900-01-1/-11 | HOISTING RING , MAIN TRANSMISSION. | 1 | ||
| 8993000111 | MIRKA PNEUMATIC SANDER | 1 | ||
| 90-820011-1 | THIS IS NOT A TOOL | Not Available | Not Available | |
| 950400111 | Cover | 1 | ||
| 9610-0111RK | 9610-0111RK REPAIR KIT | 1 | ||
| 9610011180 | SHACKLE SHACKLE | 1 | ||
| 97A28001117002 | PURGING TOOL | 1 | ||
| 98D27104001112 | STUD | 1 | ||
| 98D27104001118 | PIN | 1 | ||
| 98D36109001112 | TOOL | 1 | ||
| 98D36109001114 | TOOL | 1 | ||
| 98D47009001114 | TOOL | 1 | ||
| 98D47009001118 | TOOL | 1 | ||
| 98D47209001110 | PLUG NEA LINE | 1 | ||
| 98D47209001112 | CAP NEA LINE | 1 | ||
| 98D47209001114 | CAP NEA LINE | 1 | ||
| 98D47209001116 | DRAIN PORT ADAPTER | 1 | ||
| 98D47209001118 | DRAIN PORT ADAPTER | 1 | ||
| 98D55109001114 | CRIMPING SET SIZE 08 | 1 | ||
| 98D71203001110 | ADAPTER | 1 | ||
| 98F07203000111 | FITTING-FR.59 RH | 1 | ||
| 98F57103001110 | PROTECTIVE SLEEVE | 1 | ||
| 98F57103001112 | PROTECTIVE SLEEVE | 1 | ||
| 98F71201001110 | TORQUE ADAPTER | 7 | ||
| 98F71201001110-REVA2 | ADAPTOR | 1 | ||
| 98F71201001112 | TOOL | 1 | ||
| 98F71201001114 | TOOL | 1 | ||
| 98F71201001116 | TORQUE ADAPTOR. | 1 | ||
| 98L32109001110 | GUIDE CONE SET | 1 | ||
| 98L32109001112 | GUIDE CONE SET | 1 | ||
| 98L32109001114 | GUIDE CONE SET | 1 | ||
| 98L32109001116 | GUIDE CONE SET | 1 | ||
| 98L32109001118 | GUIDE CONE SET | 1 | ||
| 98L32201001110 | D/P NLG CONTREFICHE R/I NLG DRAG STRUT | 1 | ||
| 98L32201001112 | D/P NLG CONTREFICHE R/I NLG DRAG STRUT | 1 | ||
| 98L32201001114 | D/P NLG CONTREFICHE R/I NLG DRAG STRUT | 1 | ||
| 98L32201001116 | D/P NLG CONTREFICHE R/I NLG DRAG STRUT | 1 | ||
| 999-3001-11GSE | THRUST REVERSER UNLOCK PINS | 1 | ||
| 99A530030011101 | TOOL | 1 | ||
| A-C146600-1/11 | BEARING EXTRACTOR | 1 | ||
| A07001-11 | ACK ADAPTER - FORWARD BODY | 16 | ||
| A07001-11-M | JACKING ADAPTER | 1 | ||
| A12001-11 | PROBE SUPPORT | 1 | ||
| A20001-11 | Casters | 1 | ||
| A20001-110 | COTTER PIN | 1 | ||
| A20001-111 | Cotter Pin | 1 | ||
| A20001-112 | Cotter Pin | 1 | ||
| A20001-113 | Lock Washer | 1 | ||
| A20001-114 | Lock Washer | 1 | ||
| A20001-115 | Lock Nut | 1 | ||
| A20001-116 | Bolt | 1 | ||
| A20001-117 | Bolt | 1 | ||
| A20001-118 | TOOL | 1 | ||
| A20001-119 | Bolt | 1 | ||
| A20011-1 | TOOL | 1 | ||
| A20011-101 | Swag cone | 1 | ||
| A20011-102 | Swag cone | 1 | ||
| A20011-103 | TOOL | 1 | ||
| A20011-104 | Box For -103 | 1 | ||
| A20011-105 | BOLT | 1 | ||
| A20011-112 | Mandrel | 1 | ||
| A20011-114 | Removal mandrel | 1 | ||
| A20011-124 | Cutter assy | 1 | ||
| A20011-125 | BOLT | 1 | ||
| A20011-126 | Cutter assy | 1 | ||
| A20011-127 | Cutter assy | 1 | ||
| A20011-132 | Swag cone | 1 | ||
| A20011-133 | Swage cone | 2 | ||
| A20011-134 | Swag cone | 1 | ||
| A20011-139 | Cutter assy | 1 | ||
| A20011-140 | TOOL | 1 | ||
| A20011-141 | Bushing Removal/Installation Kit - Landing Gear | 9 | ||
| A20011-142 | Cutter assy | 1 | ||
| A20011-143 | Removal mandrel | 1 | ||
| A20011-146 | Arbor | 1 | ||
| A20011-149 | BUSHING REMOVAL/INSTALLATION KIT - LANDING GEAR | 2 | ||
| A21001-11 | ADAPTER, HOIST, AIRCONDITIONING PACK | 1 | ||
| A24001-119 | MAIN BATT HOIST | 1 | ||
| A26001-11 | Wire | 1 | ||
| A26001-110 | ADAPTOR CABLE ISSUE L. | 1 | ||
| A26001-111 | TOOL | 1 | ||
| A26001-118 | ADAPTOR CABLE TO ISSUE L | 1 | ||
| A27001-11 | KNURLED NUT | 1 | ||
| A29001-11-CM | 0125"THK A36 | 1 | ||
| A35001-11 | BOX ASSY | 1 | ||
| A36001-11 | FLARED TUBE | 1 | ||
| A38001-11 | Handle | 1 | ||
| A49001-111 | Hex Cap Screw | 1 | ||
| A49001-115 | Lock washer | 1 | ||
| A49001-118 | Hex cap screw | 1 | ||
| A49001-119 | Hex nut | 1 | ||
| A490011-17 | TOOL | 1 | ||
| A51001-11 | ANGLE | 1 | ||
| A54001-112 | SLING - STRUT | 1 | ||
| A54001-114 | ATTACH FTG ASSY | 1 | ||
| A54001-119 | Boeing | 1 | ||
| A71001-115 | TOOL | 1 | ||
| A71001-116 | BRACKET ASSY | 1 | ||
| A71001-116-F | AFT BRACKET -0 HOLD OPEN | 1 | ||
| A78001-11 | Boeing | 1 | ||
| AC500-111 | ENGINE COVERS (set of 2) | 1 | ||
| ACE-500-1116 | PNEUMATIC UNIT,EN-GINE START | 3 | ||
| AGE-00111-401 | Control Box Adjustment Caliper | 1 | ||
| AGE-00111-403 | Control Box Adjustment Caliper | 1 | ||
| AMPHENOL00111213025 | INSERTION/REMOVAL 22 | 1 | ||
| ATI1001-11 | BUCKING BAR HEAD ONLY-ERGO | 1 | ||
| AURCS100-11.1M | 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .437"(11.1mm)OD TIP, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| AURCS100-11.1MSS/50MWL | STAINLESS STEEL 100° DEGREE COUNTERSINK UNIVERSAL ROTARY PROBE, .437"(11.1mm)OD TIP, 50mm WORKING LENGTH, 100KHz-2MHz, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | ||
| B07001-11 | Storagebox | 1 | ||
| B20001-11 | PLACARD | 1 | ||
| B24001-110 | SRV, HOIST, B757, MAIN BATTERY | 1 | ||
| B24001-110-M | BATTERY HOIST, MAIN | 1 | ||
| B24001-110-MP | BATTERY HOIST EQPT | 1 | ||
| B24001-111 | HOIST BATTERY | 1 | ||
| B24001-112 | HOUSING ASSY | 1 | ||
| B24001-113 | FEED LATCH | 1 | ||
| B24001-113-REVK | **BOEING GSE | 1 | ||
| B24001-114 | BOLT | 1 | ||
| B24001-119 | HOIST EQUIPMENT - MAIN BATTERY | 9 | ||
| B24001-119-M | HOIST -0 MAIN BATTERY | 1 | ||
| B28001-11 | Adapter - Sump Drain Valve, Removal/Installation | 10 | View Images / Tech Appraisal | |
| B49001-11 | GUSSET | 1 | ||
| B49001-11-CM | 01875" THK A36 | 1 | ||
| B49001-11-F | GUSSET | 1 | ||
| B540001-11 | C-DUCT HAND PUMP | 1 | ||
| B54001-11 | TOOL | 4 | ||
| B55001-11 | SPREADER WELDMENT | 1 | ||
| B71001-113 | Pin | 1 | ||
| B78001-11 | Cable | 1 | ||
| BTA-8001-11 | B767-200 BRAKE ASSY PROTECTOR | 1 | ||
| C02-2560-0111 | MANUAL, | 1 | ||
| C04-6001-1100 | MANUAL FOR 04-6001-1100, | 1 | ||
| C10011-1 | MOORING EQUIPMENT - UNIVERSAL KIT | 3 | ||
| C10011-11 | Shackle | 1 | ||
| C10011-13 | Grab link | 1 | ||
| C35001-11 | HOSE ASSY | 1 | ||
| C36001-11 | TOOL | 2 | ||
| C36001-110 | LONG HOSE ASSY | 2 | ||
| C36001-111 | Test Equipment | 3 | ||
| C36001-112 | Supply assy | 1 | ||
| C36001-113 | Control assy | 1 | ||
| C38001-11 | UPPER PAD | 1 | ||
| C49001-11 | TAPE | 1 | ||
| C500-111 | ENGINE COVERS (with TR's, PROTRUDING gen. inlet) (set of 4) | 1 | ||
| C55001-11 | TUBE | 1 | ||
| C700-111 | INTAKE/EXHAUST COVERS, 3-strap type, includes wedge plugs under nacelle (set of 6) | 1 | ||
| C75001-11 | TOOL | 1 | ||
| C76001-11 | RIGGING PIN | 7 | ||
| CCC001-111 | TORQUE TUBE/TOOL | 1 | ||
| CJMD112-001-110V | HYD. UNIT | 2 | ||
| CPQ001114BL | SLEEVE F-JACK HANDLE CS001114 | 1 | ||
| CUTA5001116B | TOOL | 1 | ||
| D72D70000-111 | TOOL | 1 | ||
| DZZ0011-1 | TOOL | 3 | ||
| DZZ00111-1 | HOIST ADAPTOR | 1 | ||
| EEJP4001-11 | SELECTOR CABLE KIT | 1 | ||
| EMB-00111-001 | Torque Wrench Extension ARM | 2 | ||
| F07001-11 | JACK ADAPTER FWD BODY B767 | 1 | ||
| F80-0-1111-1 | Puller | 1 | ||
| F80011-1 | Engine Cradle | 4 | ||
| F80011-16 | ADAPTOR | 3 | View Images / Tech Appraisal | |
| FB70000-1-110 | CLAMP ASSY HINGE PINSAME AS FB70010-92 | 1 | ||
| FB70000-1-111 | SWING BOLT HINGE PINSAME AS FB70010-93 | 1 | ||
| FB70000-1-112 | TOWBAR & SIDE STAY PIN | 1 | ||
| FB70000-1-113 | CRADLE JACK PIN WITH LYNCH PIN AND CHAIN | 1 | ||
| FB70000-1-117 | SWING BOLT, PLATED | 1 | ||
| FB70011-15 | WIRE ROPE ASSY | 1 | ||
| FM0000111 | FOAM CUT BLK-YEL KRL756C | 1 | ||
| G12001-11 | RIG PIN ASSY | 2 | ||
| G20011-1 | PERSONNEL EQUIPMENT - LINK AND ENERGY ABSORBING LANYARD, WING/HORIZONTAL STABILIZER | 6 | ||
| G20011-10 | Tag | 1 | ||
| G20011-11 | Carabiner | 1 | ||
| G20011-12 | CABLE ASSY | 1 | ||
| G20011-13 | O-ring | 1 | ||
| G21001-11 | LOCKOUT - TEST SWITCH, N ENGINE SPEED DISCRETE PRINTED CIRCUIT ASSEMBLY (PCA) | 3 | ||
| G215-270011-1 | RUDDER SPRING TAB CLAMP | 1 | ||
| G215-280011-1 | TOOL | 1 | ||
| G600-100001-11 | WARNING STREAMER | 5 | ||
| G600-11130-143 | BLADE PROTECTOR | 1 | ||
| G600-240011-1 | PLUG - ADG DEPLOYMENT SHORTING | 1 | ||
| G600-270011-1 | PLATE AILERON DISCONNECT RIGGING | 1 | ||
| G600-290001-11 | KIT, HYD SYS DRAIN LINE | 1 | ||
| G601-710011-1 | ADAPTER - THRUST MOUNT | 2 | ||
| G601R100001-11 | RING, SPLIT | 1 | ||
| G601R270001-11-REVNC | RIGGING PIN 2 12 LG | 1 | ||
| G670-272001-11-REVA | LOCATING PIN | 1 | ||
| G700-082001-11 | KIT, ACFT LEVELING | 2 | ||
| G71001-11 | Load cell assy-AFT | 2 | ||
| G71001-110 | OUTBOARD ARM ASSY | 1 | ||
| G71001-111 | AFT swivel ftg assy（horiz brace） | 1 | ||
| G71001-112 | SWIVEL | 1 | ||
| G71001-113 | BASE | 1 | ||
| G71001-114 | PIN | 1 | ||
| G71001-115 | Inbd arm assy | 1 | ||
| G71001-116 | INBD DRAG ASSY | 1 | ||
| G71001-117 | OUTBD DRAG ASSY | 1 | ||
| GR000111 | SUPPORT COLLAR | 1 | ||
| GS20011-1 | PARALLEL BLOCK | 1 | ||
| H1000-111 | PITOT COVER | 1 | ||
| H400-111 | INTAKE COVERS/EXHAUST PLUGS SET (Viper Engines) (set of 4) | 1 | ||
| H700-111 | INTAKE COVERS ONLY (set of 2) | 1 | ||
| HC2000-111 | THIS IS NOT A TOOL | Not Available | Not Available | |
| IPA800111B3 | 3PCS 11MM BRASS BR 1/4IN HEX | 1 | ||
| IPA800111N3 | 3PCS 11MM NYLON BR 1/4IN HEX | 1 | ||
| IPA800111S3 | 3PCS 11MM STEEL BR 1/4IN HEX | 1 | ||
| J10001-11 | PLUG | 1 | ||
| J12001-11 | CROSS BEAM | 1 | ||
| J20011-1 | INTERFACE ADAPTER - GE FLOOR HOIST, LRU | 7 | ||
| J20011-19 | Hand Knob | 1 | ||
| J21001-11 | Arm assy "A" | 1 | ||
| J21001-111 | Screw | 1 | ||
| J21001-113 | Hoist ring | 1 | ||
| J24001-11 | CAM SHAFT | 1 | ||
| J27001-11 | Boss | 1 | ||
| J34001-11 | PANEL ELECTRICAL 4.1 | 1 | ||
| J36001-114 | TOOL | 1 | ||
| J36001-119 | PRECOOLER EQUIPMENT - REMOVAL/INSTALL, ROLLS ROYCE TRENT 800 (CE) | 5 | ||
| J49001-11 | HYDRO MFD PART -0 BODY | 1 | ||
| J53001-11 | TOP | 1 | ||
| J71001-110 | Pin | 1 | ||
| J71001-118 | Center lug | 1 | ||
| JC0001114 | HAMMER 160 Z | 1 | ||
| JC0001115 | BALL HUMMER | 1 | ||
| JC0001116 | BALL HUMMER | 1 | ||
| K0001115 | ENGINE CHANGE KIT | 1 | ||
| K10001-11 | PROTECTIVE COVER-WHEEL/TIRE/BRAKE,MLG & NLG | 1 | ||
| K10011-1 | PROTECTIVE COVER - ENGINE INLET, RR TRENT 1000 | 5 | ||
| K24001-11 | Storage Box Assy | 1 | ||
| K24001-110 | Square Tube | 1 | ||
| K24001-111 | Storage Box | 1 | ||
| K24001-112 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | ||
| K24001-113 | HOIST ADAPTER ASSY-VFSG(GE AND RR) AND ASG | 1 | ||
| K24001-114 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 11 | ||
| K24001-115 | VFSG Alignment Assy | 1 | ||
| K24001-116 | Main assy | 1 | ||
| K24001-117 | Shaft Adapter | 1 | ||
| K24001-118 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 10 | ||
| K24001-118-REVE | HOIST ADAPTER ASSY - RR VFSG RI | 1 | ||
| K24001-119 | HOIST ADAPTER ASSEMBLY - VARIABLE FREQUENCY STARTER GENERATOR (VFSG) (GE AND RR) AND APU STARTER GENERATOR (ASG) (CE) | 9 | ||
| K26001-11 | 3/4"ADAPTER ASSY | 1 | ||
| K27001-11 | TOOL | 1 | ||
| K27001-110 | Rod | 1 | ||
| K27001-111 | TUBE MOUNT ASSY | 1 | ||
| K27001-117 | HOIST FITTING ASSY | 1 | ||
| K29001-11 | ADAPTER EQPT | 1 | ||
| K32001-11 | SUPPOTR ARM | 1 | ||
| K35001-11 | TEST EQUIPMENT - FLOW FUSE, CREW OXYGEN DISTRIBUTI | 1 | ||
| K35001-111 | Cart assy | 1 | ||
| K35001-112 | Fitting | 1 | ||
| K35001-115 | TEST EQUIPMENT - FLOW FUSE, CREW OXYGEN DISTRIBUTION MANIFOLD | 7 | ||
| K35001-116 | TEST EQUIPMENT - FLOW FUSE, CREW OXYGEN DISTRIBUTION MANIFOLD | 3 | ||
| K47001-116 | REMOVAL/INSTALLATION EQUIPMENT - NITROGEN GENERATION SYSTEM (NGS) AIR SEPARATION MODULE, (CE) | 8 | ||
| K54001-110 | Item warning decal | 1 | ||
| K54001-111 | REMOVAL/INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | 8 | ||
| K54001-112 | Locating jig assy | 1 | ||
| K54001-114 | ATTACH FITTING | 1 | ||
| K54001-115 | ATTACH FITTING OPPOSITE TO K54001-115 | 1 | ||
| K54001-116 | ROD END | 1 | ||
| K54001-117 | RETAINING PIN | 1 | ||
| K54001-118 | RETAINING RING | 1 | ||
| K54001-119 | ROD END MOUNT | 1 | ||
| K55001-11 | LH body assy | 2 | ||
| K56001-11 | SLING SET-#1 CONTROL CAB WINDOWS | 1 | ||
| K71001-11 | THIS IS NOT A TOOL | Not Available | Not Available | |
| K71001-114 | Safety pin | 1 | ||
| K71001-116 | Proof load tag | 1 | ||
| K78001-11 | Hand chain hoist | 1 | ||
| KCT1900-11/16 | 1-1/16IN CROWS FOOT | 1 | ||
| KNP001117 | PANEL KEY | 1 | ||
| L27001-11 | Lower Clevis Assy | 1 | ||
| L300-111 | FRESH AIR/OAT VENT PLUG | 1 | ||
| L500-111 | STORAGE BAGS, for inlet and exhaust plug set (set of 2) | 1 | ||
| LEECUTA5001116B | BOLT | 1 | ||
| LIN59600111 | POCKET FOLDING MAGNIFIER 10X | 1 | ||
| LTILT1900-1-1/16 | 1-1/16IN CROWFOOT | 1 | ||
| MAS700111 | TIP, CHISEL HI PWRD 8MM DIA | 1 | ||
| MC100001-116 | COVER | 1 | ||
| MIT002A0001-112 | MISCELLANEOUS TOOL TORQUE TUBE COUNTERSINK RADIUS RELIEF TOOL | 2 | ||
| MT0001115 | OPTICAL FLAT | 1 | ||
| MTOO01-114317205 | Lee tool set | 1 | ||
| MTOO11-101000200 | Conformador exterior floating | 1 | ||
| N2001-11SB | FITTING: ELBOW,STR THREAD, | 1 | ||
| N2001-11SE | ELBOW, STRAIGHT THREAD, | 1 | ||
| P2-07-0011-100 | FLASHLIGHT | 1 | ||
| PYT1500111 | COMFORT BELT 36IN TO 44IN | 1 | ||
| RBW109-3130-01-119 | Tail Rotor Static Balancing Tool | 2 | ||
| SOL83-71201001110 | TORQUE ADAPTER RR FWD ASSY | 1 | ||
| ST001118000010 | PULLER - BEARING | 1 | ||
| T01001112 | WHEEL WELL DOOR ACTUATOR BUSHING REM | 1 | ||
| TE21T-58001-11 | TEST EQUIP. KIT | 1 | ||
| TES0011-10 | INLET PORT PLUG | 1 | ||
| TF50B10011-1 | TOOL | 1 | ||
| TFM250011100 | COUNTERBORE | 1 | ||
| TFM250011140 | COUNTERBORE | 1 | ||
| TOM00111 | ENGINE CHANGE SHELTER TOM00111 | 1 | ||
| UH1N-6001-11 | THIS IS NOT A TOOL | Not Available | Not Available | |
| Z020H0001112 | PANEL: PROGRAMMING AND TEST, PTP | 1 | ||
| Z071K0001110 | GSE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
