| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98D29208246001 | rat lock | 31 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 10-0108-00 | CALIBRAITION BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 11MIT65B04012 | Lock landing gear doors (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2MIT65B80174 | LOCK ASSY - DOOR, BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3ME65B05730-1 | Lock assy outboard elevator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3ME65B05730-2 | Lock assy outboard elevator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460005835 | SLEEVE SLEEVE - GROUND LOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007280 | SLEEVE-GROUND LOCK (CALIBRATION) | 1 | |
| (CALIB) 46600-11 | LOCK ACTUATOR ASSEMBLY (LH) (CALIBRATION) | 1 | |
| (CALIB) 6583102-1 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 97A27302009000 | LOCKTOOL LOCKING TOOL - PITCH TRIM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A32402018000 | GAGE PRESSURE GAGE-BRAKE BLOCK HYDRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307628000 | LOCK LOCK-SAFETY,CARGO DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309003000 | ELEVATOR DEVICE - LOCKING, ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27403500000 | PITCH TRIM CONTROL LOCKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504030001 | LOCK - TORQUE SHAFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27803000000 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27803500001 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307515000 | SAFETY LOCK-ACTUATOR, CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98DNSA20208080 | LOCKING BOLT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98DNSA20208120 | LOCKING BOLT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24209001000 | PIN PIN-SAFETY, RAT UPLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27801001000 | LOCKNGTL LOCKING TOOL-FLAP SLAT CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108001000 | SETTING TOOL - UPLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52308455000 | LOCK - SAFETY, CARGO DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H064-000 | LOCKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S55305011-0003 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 98S57105032200 | CALIBRATION BLOCK | 1 | |
| (CALIB) 98S57105032202 | CALIBRATION BLOCK | 1 | |
| (CALIB) 98V32104010000 | SETTING TOOL - UPLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52308780000 | LOCK-SAFETY, CDA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A53307292001 | Reference Block (NDT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403007000 | REFERENC REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204164001 | BLOCK-REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53303032000 | REFERENCE BLOCK (CALIBRATION) | 1 | |
| (CALIB) 99F54503011000 | REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503012000 | REFERENCE BLOCK FOR A330 NTM 54 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A55001-22 | LOCK EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE16505 | PIN - STOW LOCK (CALIBRATION) | 1 | |
| (CALIB) B27013-19 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B78009-26 | LOCK EQUIPMENT - THRUST REVERSER MAINTENANCE (CALIBRATION) | 2 | |
| (CALIB) C27051-1 | LOCK SET - LEADING EDGE SLAT AND KRUEGER FLAP ACTUATORS (CALIBRATION) | 1 | |
| (CALIB) C27057-1 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) C78023-1 | T/R COWL ACTUATOR LOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CATGS1 | HIGHLOCKMETER (CALIBRATION) | 1 | |
| (CALIB) CP11301 | SPRING LOCKING RING (CALIBRATION) | 1 | |
| (CALIB) DRT68864 | LOCK STAY BRACE TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68923 | GROUND LOCK SLEEVE_MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F26506000 | LOCKING TOOL (CALIBRATION) | 1 | |
| (CALIB) FDOO03D23654000 | LOCKING STEERING PIN (CALIBRATION) | 1 | |
| (CALIB) FDOO04D23664000 | M.L.G LOCKING PIN (CALIBRATION) | 1 | |
| (CALIB) G32048-38 | Locking Mechanism (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G32049-1 | Locking Mechanism (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38004-17 | Blockage Removal Tool - Vacuum Lav System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38006-1 | EQUIPMENT - REMOVAL,WASTE BLOCKAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71038-1 | UNLOCKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87131-1 | EXTRACTR EXTRACTOR - LOCK WASHER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27005-48 | LOCK eqpt -INBD/OUTBD, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J55002-37 | LOCK AY, HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27046-15 | LOCK EQPT - ELEVATOR PCU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K52002-90 | BARRIER, LOCKING ARM EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K55002-45 | LOCK - HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MA8158-7 | FWD Bootstrap Chain Block (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SK2029C221-01 | LOCKING SHAFT TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB)B78009-26 | THRUST REVERSER LOCKING (CALIBRATION) | 2 | |
| 10-0108-00 | CALIBRATION BLOCK | 1 | |
| 10-0109-00 | CALIBRATION BLOCK | 2 | |
| 10-0120-00 | CALIBRATION BLOCK | 1 | |
| 10-0121-00 | CALIBRATION BLOCK | 1 | |
| 100-51777 | INHIBITION LOCK, THE MANUFACTURER MENTIONED IN THE MANUAL IS ARGO-TECH CORPORATION | 1 | |
| 106P12 | CALIBRATION BLOCK (HOCKING) | 1 | |
| 10STEP-IA | CALIBRATION BLOCK - 7075-T6 | 1 | |
| 10X-11-03 | PIN - RAT GROUND LOCK | 1 | |
| 113-226-000 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 126 | Surface Crack Calibration Block | 7 | |
| 127-0-032 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-040 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-063 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 12AAA787 | Mitutoyo 12AAA787 Block for Calibrating Probe Diameter | 1 | |
| 139W00-542-00 | BENDING TOOL (FOR LOCKING PLATE OF ANTI-RATTLE NUT) | 1 | |
| 171T17969-401 | CALIBRATION BLOCK | 3 | |
| 186 | CALIBRATION BLOCK | 1 | |
| 186A | Calibration Block | 3 | |
| 186ABCDEF | ET CALIBRATION TEST BLOCK | 1 | |
| 186B | Calibration Block | 3 | |
| 186C | Calibration Block | 4 | |
| 186D | Calibration Block | 4 | |
| 186E | Calibration Block | 4 | |
| 186F | Calibration Block | 3 | |
| 188A | CALIBRATION BLOCK | 5 | |
| 189 | Calibration Block | 7 | |
| 194 | Calibration Block | 9 | |
| 1051 | Calibration Block | 1 | |
| 1052 | Calibration Block | 1 | |
| 1053 | Calibration Block | 1 | |
| 1054 | Calibration Block | 2 | |
| 1077 | Calibration Block | 1 | |
| 1704 | EDDY CURRENT CALIBRATION BLOCK | 6 | |
| 05384 | CALIBRATION BLOCK | 1 | |
| 10471 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 10499 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 13986 | 1/4'' HI-LOCK RATCHET WITH ADJUSTABLE FLEX HEAD | 1 | |
| 131387 | EDDY CURRENT CALIBRATION TEST BLOCK | 1 | |
| 149279 | DAC Calibration Block (MS) | 1 | |
| 149342 | PA Calibration Block (MS) | 1 | |
| 0426695 | CALIBRATION BLOCK | 1 | |
| 1027421 | CALIBRATION BLOCK | 1 | |
| 1100114 | CALIBRATION BLOCK (2-164-551) NFE | 1 | |
| 194A | Calibration Block | 4 | |
| 194C | CALIBRATION BLOCK | 1 | |
| 2-069-69-0002 | PROBE & CALIBRATION BLOCK SET | 1 | |
| 2-164- 501 | CALIBRATION BLOCK (STEEL) | 4 | |
| 2-164-501 | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-164-55 | CALIBRATION BLOCK | 1 | |
| 2-164-551 | CALIBRATION BLOCK | 2 | |
| 2-164-551-2024T3 | CALIBRATION BLOCK | 1 | |
| 2-835-01-9301 | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9330 | AIRBUS CALIBRATION BLOCK, 6AL-4v TITANIUM, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9331 | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. | 1 | |
| 2-887-01- 9313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2-887-01-9313S | CALIBRATION BLOCK.. | 6 | |
| 2-887-01-9314S | SPLIT CONICAL CALIBRATION BLOCK | 5 | |
| 2-887-01-93155 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 2-887-01-9315S | SPLIT CONICAL CALIBRATION BLOCK | 4 | |
| 2-887-01-9316S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9319S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9321S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9323S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9325S | CALIBRATION BLOCK | 3 | |
| 2-887-019313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2.164-551 | CALIBRATION BLOCK | 2 | |
| 2.887.01-9313-S | CALIBRATION BLOCKS FOR ROTOTEST | 6 | |
| 2.887.01-9314-S | CALIBRATION BLOCKS FOR ROTOTEST | 5 | |
| 2.887.01-9315-S | CALIBRATION BLOCKS FOR ROTOTEST | 4 | |
| 2.887.01-9316-S | CALIBRATION BLOCKS FOR ROTOTEST | 3 | |
| 20-3261 | Trimos 20-3261 Gauge Block Calibration Module QM-BLOCK | 1 | |
| 2000108 | Reducer for TB3/TB125. Includes ball lock pin for securing reducer in towbar. Converts 3-1/4" ID multi-head bar to 3" ID to allow smaller corporate heads to fit larger bar. | 1 | |
| 2001153 | Rx towbar for Lockheed Martin C-130 Series aircraft family. Heavy duty steel towbar features linear & radial shear protection, hydraulic lift kit, road speed rated wheels-hubs and bearing. 15 foot long towbar ships fully assembled except for tube haves | 1 | |
| 2001327 | Tire service gauge/inflator: *Digital* Nitrogen (300psi). with push button inflator and push button bleed valve. Straight, non-locking tire chuck Calibrated digital gauge with certificates. | 1 | |
| 2001405 | Tire service gauge/inflator Analog: Nitrogen (300psi). with push button inflator and push button bleed valve. Straight, non-locking tire chuck Calibrated gauge with certificates. | 1 | |
| 2003138 | towbar for Lockheed Martin C-130 Series aircraft with FLIR. Heavy duty steel towbar features linear & radial shear protection, road speed rated wheels-hubs and bearing. | 1 | |
| 21C7247G01 | ADAPTER LOCK GAS GENERATOR T700 | 2 | |
| 2211M | 5-STEP CALIBRATION BLOCK, 304 STAINLESS STEEL | 1 | |
| 2213M | THICKNESS CALIBRATION BLOCKS | 1 | |
| 2214M | 5-STEP CALIBRATION BLOCK, 1018 CARBON STEEL | 1 | |
| 2218M | CALIBRATION BLOCK (1MM - 15MM) | 1 | |
| 2561517 | Wrench, operating lever locknut | 2 | |
| 23055269 | Dimpler – Cuplock Washer, Gas Generator Retaining Nut | 1 | |
| 2309-T006-001 | SOCKET- REMOVAL/INSTALLATION, LOCK NUTILLUSTRATED TOOLAND EQUIPMENT MANUAL | 14 | |
| 2605014-1 | PLACARD (LOCK OPERATION) | 1 | |
| 27-95031-001 | Calibration Block, Fairchild SA226-32-065:PG8 FIG1 | 2 | |
| 29A028 | CALIBRATION BLOCK | 4 | |
| 29A029 | A318-319-320-321 Calibration Block | 5 | |
| 29A030 | CALIBRATION BLOCK | 1 | |
| 29A032 | CALIBRATION BLOCK | 3 | |
| 29A047 | A318-319-320-321 Calibration Block | 5 | |
| 29A049 | AUSTENITIC STEEL CALIBRATION BLOCK | 2 | |
| 2C81156 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 2C81156G01 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 3060 KIT | VISU-LOCK RATCHET HAND TOOL KIT | 1 | |
| 335 | Calibration Block | 10 | |
| 382-57-74 82-688 | HERCULES CALIBRATION BLOCK 382-57-74 82-688 | 1 | |
| 3NOTCHEC.IT | CALIBRATION BLOCK | 1 | |
| 460005835 | SLEEVE SLEEVE - GROUND LOCK (CALIBRATION) | 45 | |
| 53-022-100 | 20-INCH GAGE BLOCK, COMPARATOR, RESOLUTION: 0.1 Μ IN. | 1 | |
| 53-10-110A | CALIBRATION BLOCK | 2 | |
| 530G12401-1 | CALIBRATION BLOCK KIT FOR CRANKSHAFT INSPECTION | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | 1 | |
| 57-10-102-2 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 57-10-102-4 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 57925T4 | SET BLOCK-RETAINER (PARKER HANNIFIN CORPORATION) | 1 | |
| 5909073-TB | SENSOR TEMPERATURE TEST BLOCK | 1 | |
| 624A100-A | RAT GROUND SAFETY LOCKING PIN | 1 | |
| 640-050-002 | CALIBRATION BLOCK | 2 | |
| 6583102-1 | CALIBRATION BLOCK | 1 | |
| 66272 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) | 1 | |
| 66276 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) | 1 | |
| 66288 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 1 | |
| 66289 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 2 | |
| 66290 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 2 | |
| 66318 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 2 | |
| 66322 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 2 | |
| 66327 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 1 | |
| 66334 | Merit® PowerLock Surface Preparation Discs (Type: Snap-On) (Size/diameter: 2") (Grit: Medium) (Add to cart: Add To Cart) (Type: Snap-On) (Size/diameter: 3") (Grit: Medium) (Add to cart: Add To Cart) (Type: Turn-On) (Size/diameter: 2") (Grit: Medium) (Add | 1 | |
| 6635000220368 | ULTRASONIC TESTING SPARES:- BASIC CALIBRATION BLOCK FOR ULTRASONIC TESTER | 1 | |
| 6635010925129 | UT CALIBRATION BLOCK | 1 | |
| 69741-1 | ASPIRATOR SPACER BLOCKS | 1 | |
| 69741-3 | ASPIRATOR SPACER BLOCKS | 1 | |
| 7010SN | ADAPTER CLOCK COMPARATOR - DIGIMESS | 1 | |
| 70198-101 | UNIVERSAL ASPIRATOR SPACER BLOCK | 1 | |
| 70198-103 | UNIVERSAL ASPIRATOR SPACER BLOCK | 1 | |
| 70521 | THICKNESS CALIBRATION BLOCK, 05 STEPS (0.100 / 0.200 / 0.300 / 0.400 AND 0.500 INCH) | 1 | |
| 7075-3-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-012 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-025 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-050 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-075 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-150 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-600 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-600 | CALIBRATION BLOCK | 1 | |
| 7175T7351 | NDT CALIBRATION BLOCK - 7175T7351 - RANGE: 2MM | 1 | |
| 7175T7351 - RANGE 1MM TO 25MM | THICKNESS CALIBRATION BLOCK | 1 | |
| 7175T7351 - RANGE: 2MM TO 12.5MM | ULTRASONIC THICKNESS GAUGE CALIBRATION BLOCK | 1 | |
| 718 | ULTRASONIC CALIBRATION BLOCK FOR INCONEL 718 | 1 | |
| 740KR | PIN - RAT GROUND LOCK (OPTIONAL PART NUMBER) | 1 | |
| 7637987-1 | Calibration Block | 1 | |
| 805276-S57-2 | SUPPORT BLOCK – 2.38 DIA GENERATOR | 1 | |
| 8400K | CALIBRATION BLOCK - STANDARD | 7 | |
| 8676M3 | PALLET LOCK CALIBRATION TESTER | 1 | |
| 9441M84 | CONTROL SHROUD LOCK, DYNAMIC BALANCE OPERATION | 1 | |
| 972001 | CALIBRATED STEP BLOCK KIT | 1 | |
| 981-102 | ANGLE CALIBRATION BLOCKS SET | 1 | |
| 98A49601001000 | LOCKING TOOL-RAT CONTROL HANDLE | 5 | |
| 98A53803501000 | CALIBRATION BLOCK | 1 | |
| 98A53P03020000 | CALIBRATION BLOCK | 1 | |
| 98A54003069000 | CALIBRATION BLOCK | 2 | |
| 98A54003075 | CALIBRATION BLOCK | 2 | |
| 98A54003077 | CALIBRATION BLOCK | 2 | |
| 98D2 | LOCKING MECHANISM (CALIBRATION) | 7 | |
| 98D29208246001 | RAT BLOCKING DEVICE | 31 | |
| 98D29208581000 | SAFETY DEVICE-RAT LOCK RAT DEPLOY (ALTERNATE: 98D29207550000) | 26 | |
| 98D51407291001 | CALIBRATION BLOCK SET | 1 | |
| 98DNSA20208120 | LOCKINGBOLT(CALIBRATION)(CALIBRATION) | 18 | |
| 98F27207516000 | PIN - LOCKING, CABLE QUADRAT | 16 | |
| 98L24209001000 | PIN-SAFETY, RAT UPLOCK | 6 | |
| 98S53005014000 | NDT CALIBRATION BLOCK | 3 | |
| 98S53005020-202 | CALIBRATION BLOCK | 2 | |
| 98S53005020-204 | CALIBRATION BLOCK | 2 | |
| 98S53005020-206 | CALIBRATION BLOCK | 2 | |
| 98S53005020-208 | CALIBRATION BLOCK | 3 | |
| 98S53005020-210 | CALIBRATION BLOCK | 2 | |
| 98S53005020-212 | CALIBRATION BLOCK | 2 | |
| 98S53005020-214 | CALIBRATION BLOCK | 2 | |
| 98S53005020-216 | CALIBRATION BLOCK | 2 | |
| 98S53305004-000 | UT CALIBRATION BLOCK | 5 | |
| 98S53305005-000 | UT CALIBRATION BLOCK | 5 | |
| 98S54305002200 | CALIBRATION BLOCK | 5 | |
| 98S55305011-0003 | CALIBRATION BLOCK | 1 | |
| 98S55305011-100 | CALIBRATION BLOCK | 1 | |
| 98S57105010200 | CALIBRATION BLOCK | 3 | |
| 98S57105012-200 | CALIBRATION BLOCK | 3 | |
| 98S57105012200 | CALIBRATION BLOCK | 3 | |
| 98S57205030.000 | CALIBRATION BLOCK | 3 | |
| 98S57205030.001 | COMPOSITE CALIBRATION BLOCK | 4 | |
| 98S57205030.004 | COMPOSITE CALIBRATION BLOCK | 5 | |
| 98S57205030000 | WING UPPER PANEL CALIBRATION BLOCK | 3 | |
| 98S57205030001 | CARBON CALIBRATION BLOCK | 4 | |
| 98S57205030004 | CARBON CALIBRATION BLOCK | 5 | |
| 98V24209003000 | BLADE LOCK - RAT | 3 | |
| 9970-958-579 | CALIBRATION BLOCK | 1 | |
| 99A51003000000 | CALIBRATION BLOCK | 2 | |
| 99A51107299001 | Calibration Block | 5 | |
| 99A51107300000 | Calibration Block | 5 | |
| 99A51107399001 | Calibration Block | 1 | |
| 99A530003001101 | CALIBRATION BLOCK ALUMINUM | 1 | |
| 99A53003001100 | Calibration Block | 4 | |
| 99A53003001101 | Calibration Block | 8 | |
| 99A53003001102 | Calibration Block | 5 | |
| 99A53003001103 | Calibration Block | 4 | |
| 99A53003001104 | Calibration Block Titanium TA6V | 4 | |
| 99A53003001105 | Calibration Block | 4 | |
| 99A53003001106 | Calibration Block | 4 | |
| 99A53003001107 | Calibration Block Titanium TA6V | 4 | |
| 99A53003001108 | Figure 1 Calibration Block | 4 | |
| 99A53107215000 | CALIBRATION BLOCK | 5 | |
| 99A53107251000 | CALIBRATION BLOCK | 2 | |
| 99A53107269000 | Calibration Block | 1 | |
| 99A53107283000 | CALIBRATION BLOCK | 2 | |
| 99A53107287000 | Calibration Block | 7 | |
| 99A53107290000 | Calibration Block | 1 | |
| 99A53307236000 | CALIBRATION BLOCK | 4 | |
| 99A53307267000 | CALIBRATION BLOCK | 2 | |
| 99A53307267000 304 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000/7150-T6 | AIRBUS A300-600 CALIBRATION BLOCK | 1 | |
| 99A53307274000 | CALIBRATION BLOCK | 5 | |
| 99A53307292000 | CALIBRATION BLOCK | 1 | |
| 99A53307292001 | Calibration Block | 4 | |
| 99A53307319000 | CALIBRATION BLOCK | 2 | |
| 99A53407285000 | Calibration Block | 1 | |
| 99A53507286000 | CALIBRATION BLOCK | 2 | |
| 99A54003098000 | Calibration Block | 1 | |
| 99A55307306000 | CALIBRATION BLOCK | 2 | |
| 99A55307328000 | CALIBRATION BLOCK - Fab. Stufenblock 80mm | 1 | |
| 99A55407291000 | CALIBRATION BLOCK | 5 | |
| 99A57004001286 | Calibration Block | 1 | |
| 99A57004101000 | Calibration Block | 6 | |
| 99A57004101000-MOD | CALIBRATION BLOCK (NDT) | 1 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57204403000 | CALIBRATION BLOCK | 3 | |
| 99A57204403001 | REFERENCE STANDARD - CALIBRATION BLOCK | 5 | |
| 99A57257327000 | CALIBRATION BLOCK | 1 | |
| 99A57504296000 | CALIBRATION BLOCK | 3 | |
| 99D51103005000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103008000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103009000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103010000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103011000 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 99D51103012000 | CALIBRATION BLOCK | 1 | |
| 99D51103013000 | CALIBRATION BLOCK | 2 | |
| 99D51103014000 | CALIBRATION BLOCK | 1 | |
| 99D51103015000 | CALIBRATION BLOCK | 1 | |
| 99D51103016000 | CALIBRATION BLOCK | 1 | |
| 99D51107295000 | CALIBRATION BLOCK | 5 | |
| 99D51303001000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51307001000 | CALIBRATION BLOCK | 1 | |
| 99D51407291000 | Calibration Block | 2 | |
| 99D51407291001 | CALIBRATION BLOCK SET | 7 | |
| 99D51407291001 | CALIRATION BLOCK SET - PATRON HFEC | 7 | |
| 99D52809004000 | CALIBRATION BLOCK | 7 | |
| 99D53203000002 | CALIBRATION BLOCK | 5 | |
| 99D53409001000 | Calibration Block | 5 | |
| 99D54403000004 | CALIBRATION REFERENCE BLOCK | 7 | |
| 99D54403000005 | CALIBRATION BLOCK | 1 | |
| 99D54403000006 | CALIBRATION REFERENCE BLOCK | 1 | |
| 99D54403001002 | NDT CALIBRATION BLOCK | 4 | |
| 99D54403002000 | CALIBRATION BLOCK | 4 | |
| 99D54403003000 | CALIBRATION BLOCK | 4 | |
| 99D54403004000 | CALIBRATION BLOCK | 6 | |
| 99D54503004000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 54-52-17-991-003-A SHEET 01, PAGE7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503006000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-08-991-007-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503007000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-09-991-003-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D55109001000 | CALIBRATION BLOCK SET | 7 | |
| 99D55109001000 | CALIRATION BLOCK SET - PATRON HFEC | 7 | |
| 99D55367001000 | CALIBRATION BLOCK - FABRIC | 1 | |
| 99D55367002000 | CALIBRATION BLOCK - TAPE | 1 | |
| 99D57003007000 | CALIBRATION BLOCK | 2 | |
| 99D57003009000 | CALIBRATION BLOCK | 2 | |
| 99D57003011000 | CALIBRATION BLOCK | 2 | |
| 99D57004000000 | CALIBRATION BLOCK | 4 | |
| 99D57004001000 | Calibration Block | 4 | |
| 99D57103002001 | CALIBRATION BLOCK | 5 | |
| 99D57103004000 | CALIBRATION BLOCK | 4 | |
| 99D57103005001 | CALIBRATION BLOCK | 5 | |
| 99D57103006000 | CALIBRATION BLOCK | 5 | |
| 99D57103007000 | Calibration Block | 3 | |
| 99D57103008000 | CALIBRATION BLOCK | 6 | |
| 99D57103009000 | CALIBRATION BLOCK | 4 | |
| 99D57103010000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57103011000 | CALIBRATION BLOCK | 5 | |
| 99D57103012000 | CALIBRATION BLOCK | 6 | |
| 99D57103013000 | CALIBRATION REFERENCE BLOCK | 6 | |
| 99D57103014000 | UT CALIBRATION BLOCK | 5 | |
| 99D57103015000 | Calibration Block | 4 | |
| 99D57103016000 | Calibration Block | 7 | |
| 99D57103017000 | CALIBRATION BLOCK | 5 | |
| 99D57103018000 | CALIBRATION BLOCK | 4 | |
| 99D57103019000 | CALIBRATION BLOCK | 4 | |
| 99D57103020000 | Calibration Block | 3 | |
| 99D57103021000 | Calibration Block | 5 | |
| 99D57103025000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57103026000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57103032000 | CALIBRATION BLOCK | 2 | |
| 99D57103035000 | CALIBRATION BLOCK | 2 | |
| 99D57103036000 | CALIBRATION BLOCK | 2 | |
| 99D57204107000 | CALIBRATION BLOCK | 6 | |
| 99D57204164000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204164001 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204167000 | Calibration Block | 2 | |
| 99D57204189000 | CALIBRATION BLOCK | 1 | |
| 99D57204190000 | CALIBRATION BLOCK | 1 | |
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57404002000 | CALIBRATION BLOCK | 1 | |
| 99D57504103001 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99D57504109000 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99D91107295000 | CALIBRATION BLOCK | 1 | |
| 99F53107330000 | CALIBRATION TEST BLOCK SET | 2 | |
| 99F53207313000 | CALIBRATION BLOCK | 3 | |
| 99F53207314000 | CALIBRATION BLOCK | 2 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303008001 | CALIBRATION BLOCK | 2 | |
| 99F53303010000 | CALIBRATION BLOCK | 2 | |
| 99F53303026000 | CALIBRATION BLOCK | 1 | |
| 99F53303027000 | CALIBRATION BLOCK | 1 | |
| 99F53303030000 | CALIBRATION BLOCK | 1 | |
| 99F53303031000 | CALIBRATION BLOCK | 1 | |
| 99F53303057000 | CALIBRATION BLOCK | 1 | |
| 99F53303086000 | CALIBRATION BLOCK | 5 | |
| 99F53303094000 | CALIBRATION BLOCK | 2 | |
| 99F53303095000 | CALIBRATION BLOCK | 2 | |
| 99F53303099000 | CALIBRATION BLOCK | 3 | |
| 99F53303100000 | CALIBRATION BLOCK | 1 | |
| 99F53303101000 | CALIBRATION BLOCK | 2 | |
| 99F53303105000 | CALIBRATION BLOCK | 1 | |
| 99F53303115000 | NDT CALIBRATION BLOCK | 3 | |
| 99F53303125000 | CALIBRATION BLOCK | 2 | |
| 99F53407333000 | CALIBRATION BLOCK | 1 | |
| 99F53507256000 | CALIBRATION BLOCK | 2 | |
| 99F54503000000 | CALIBRATION BLOCK | 2 | |
| 99F54503011000 | CALIBRATION BLOCK | 2 | |
| 99F54503012000 | CALIBRATION BLOCK | 2 | |
| 99F55364009000 | NDT CALIBRATION BLOCK | 1 | |
| 99F57004100001 | Calibration Block | 4 | |
| 99F57004101001 | BLOCK-CALIBRATION | 4 | |
| 99F57103017000 | Calibration Block | 3 | |
| 99F57103028000 | CALIBRATION BLOCK | 2 | |
| 99F57103054000 | CALIBRATION BLOCK | 2 | |
| 99F57103056000 | Calibration Block | 1 | |
| 99F57204102000 | Calibration Block | 7 | |
| 99F57204105000 | CALIBRATION BLOCK | 3 | |
| 99F57204106000 | CALIBRATION BLOCK | 4 | |
| 99F57204124000 | CALIBRATION BLOCK | 2 | |
| 99F57204130000 | CALIBRATION BLOCK | 4 | |
| 99F57204173000 | CALIBRATION BLOCK | 3 | |
| 99F57204174000 | CALIBRATION BLOCK | 2 | |
| 99F57204175000 | CALIBRATION BLOCK | 2 | |
| 99F57204176000 | CALIBRATION BLOCK | 2 | |
| 99F57404001000 | NDT CALIBRATION BLOCK | 1 | |
| 99L51 107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51304001000 | NDT CALIBRATION BLOCK | 1 | |
| 99L52107325000 | CALIBRATION BLOCK | 1 | |
| 99L53303021000 | AIRBUS A380-800 CALIBRATION BLOCK 53-31-33-991-006-A (SHEET 01& 02) PAGES 20-21. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53509001000 | CALIBRATION BLOCK | 1 | |
| 99L53509006000 | CALIBRATION BLOCK | 1 | |
| 99L55209001000 | CALIBRATION BLOCK | 1 | |
| 99L57204008000 | AIRBUS A310 CALIBRATION SENSITIVITY BLOCK PART4 57-29-01 PAGE 418 FIGURE 408. Includes Test Report and certificate of Conformance. | 1 | |
| 99L57204068000 | AIRBUS CALIBRATION BLOCK A380-800 57-21-17-991-024-A. MATERIAL: 2024 HDT T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L71003001000 | CALIBRATION BLOCK | 1 | |
| 99N28207315000 | Calibration Block | 4 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99V51307001000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307002000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307003000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307004000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307008000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51907329000 | CALIBRATION BLOCK | 2 | |
| 99V51907331000 | CALIBRATION BLOCK | 1 | |
| 99V52307335000 | CALIBRATION BLOCK | 1 | |
| 99V52307336000 | CALIBRATION BLOCK | 1 | |
| 99V57103001000 | CALIBRATION BLOCK | 1 | |
| 99V57103002000 | Calibration Block-issue C | 1 | |
| 99V57200003000 | CALIBRATION BLOCK | 3 | |
| A289A | ASSY Calibration Block Calibration Block | 1 | |
| A330-93905-0001 | CALIBRATION BLOCK | 1 | |
| A35001-13 | SAFETY PIN AND FLAG - CHEMICAL OXYGEN GENERATOR (LOCK SET) | 8 | |
| A386 | Calibration Block | 2 | |
| A389A | Calibration Block | 3 | |
| A389B | Calibration Block | 2 | |
| A389C | Calibration Block | 2 | |
| A6 | CALIBIRATION BLOCK | 1 | |
| A78015-1 | REWORK JIG - HINGE, BLOCKER DOORS, THRUST REVERSER (PRATT AND WHITNEY) | 3 | |
| A8-AF-CAL-BLOCK | CALIBRATION CHECK BLOCK | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006AL | CUSTOM 3 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006CS | CUSTOM 3 STEP CALIBRATION BLOCK 4340 CARBON STEEL, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002" PER DC-10 54-10-11 FIGURE 603 SHEET 43 PAGE 655. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015 | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE.0.190-0.194, countersink: 100 degrees, 0.3748-0.3819 diameter....0.203-0.207, countersink: 100 degrees, 0.3748-0.3819 diameter....0.2172-0.2182, co... | 1 | |
| AFNDT-1015-CALCS | CALIBRATION BLOCK 4140S. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CALSS | CALIBRATION BLOCK 304SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS CARBON STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-INC625 | CALIBRATION STANDARD INCOLNEL BLOCK 625 5X1 OAL .10,.20,.30,.40,.50. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-SS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS STAINLESS STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015/2024 | CUSTOM 4 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES .75"x.75" FACE WITH STEP THICKNESSES OF .040",.060",.080",.100" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1060 | NON-PIPING CALIBRATION BLOCK, 3/4 X 6 1/4 X 12. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1062 | NON-PIPING CALIBRATION BLOCK FIGURE T-434.2.1 ASME SECTION V Article IV, 3" X 6 1/4" X 12". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ALUMINUM CALIBRATION BLOCK 0.020"-0.100" | 1 | |
| AFNDT-1076TI | TITANUM CALIBRATION BLOCK 0.020"-0.100 | 1 | |
| AFNDT-2038AL | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156"Ø and .187"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2056 | CUSTOM CALIBRATION BLOCK, THREE SURFACE NOTCHES .008" , .020" , .040" SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2058/7075T6 | 6 STEP CALIBRATION BLOCK, CUSTOM, .030", .040", 0.60" , 0.80", .100", .150", 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2079/2024T3 | 6 STEP CALIBRATION BLOCK, STEP SIZES .030", .100", .250", .500", .750", 1.0" in 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2085/7075-T6 | 6 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(500",.600",.700",.800",.900" and 1.0") +/- .001" 7075-T6 ALUMINUM . Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086SS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/CS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/SS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/2024-T3 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/304SS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/6AL-4V | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088CS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/AL | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/MAG | 5 STEP CALIBRATION BLOCK, STEP THICKNESSES: .050, .100, .150 , .200, .250. STEP PAD SIZE: 1.0" x 1.0", MATERIAL: MAGNASESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/S | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/SS | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 300 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/TI | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2093/7075-T6 | 5 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(1.100", 1.200", 1.300", 1.400", 1.500" ) +/- .001" 7075-T6 ALUMINUM. Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797 | 1 | |
| AFNDT-2098/7175 | ALUMINUM CALIBRATION BLOCK 2.5MM-12.5MM | 1 | |
| AFNDT-2103AL | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. PAD SIZE: 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103CS | METRIC 5 STEP CALIBRATION BLOCK, 1018 CARBON STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103SS | METRIC 5 STEP CALIBRATION BLOCK, 304 STAINLESS STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2129CS | LEONDRO CALIBRATION BLOCK PAGE 18 FIGURE 3 S.B. N°169-165. 2 STEP BLOCK, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 2-3mm and 10-11mm. ±.0.1mm, PAD SIZE: 20mm X 20mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/19MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 270mm x 150mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/38MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 330mm x 150mm x 38mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3039 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-304AWSDS | DISTANCE / SENSITIVITY (DS) CALIBRATION BLOCK 304 STAINLESS STEEL AWS type DS | 1 | |
| AFNDT-3062/13-8PH | 8 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/15-5PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/17-4PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/13-8PH | 5 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/17-4PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/6AL4V | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3106TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.035", 0.070", 0.105", 0.140", 0.175", .210" 0.250" +/- .001". STEP PAD SIZE: .75" x .75". Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3124/316L | Custom Ultrasonic Calibration Block. Material: 316L Stainless Steel. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3124/6061 | Custom Ultrasonic Calibration Block. Material: 6061 Al. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3175CS | 8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report and Cer... | 1 | |
| AFNDT-3175TI | 8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report an... | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3200/321 | 7 STEP CALIBRATION BLOCK. STEP SIZES: .020", .040", .060", .080", .100", .150", and .200" +/- .010". PAD SIZE: 1.0" x 1.0", MATERIAL: 321 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3201CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .250", .500", .750", 1.00" ±.002, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3230A | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 5/16" (.312")Ø Contains one EDM Corner Notch .050" x .050" +/- .001", and one EDM Surface Notch .750" long x .020 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Test Rep... | 1 | |
| AFNDT-3236CS | Custom Thin 4-Step Calibration Block, 1018 Carbon Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3236SS | Custom Thin 4-Step Calibration Block, 304 Stainless Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3237AL | Custom Thin 8-Step Calibration Block, 7075 Aluminum (.030, .040, .050, .060, .070, .080, .090 .100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3316AL | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 3/8" (.375")Ø Contains one EDM Corner Notch .030" x .030" +/- .001", and one EDM Radius Thumbnail Notch .120" long x .030 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Tes | 1 | |
| AFNDT-3334AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3334AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3335/1018 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 1018 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/2024-T3 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 2024-T351. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and C | 1 | |
| AFNDT-3335/4340 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 4340 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/7075-T6 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3335/TI6AL-4V | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 6AL-4V Titanium . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cert | 1 | |
| AFNDT-3339MAG | 4 Step Calibration Block, .25", .500", .750", 1.00". Pad Size: .750" x .750". MATERIAL: AZ21 Magnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3340CS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 4340 CARBON STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3340SS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3410AL | CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3415 | CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3428 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(. | 1 | |
| AFNDT-3429 | 6 STEP CALIBRATION BLOCK, .5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm. ± .001, 3/4X3/4 FACE, 1018 CARBON STEEL Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437SS | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3453 | Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020" x .020" +/- .002", and one EDM Surface Notch .030 deep x .015" wide +/- .002 . Block Size = 3.75" x 1.0" x .25". Includes Test Report and Certificate | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483CS | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3505/6061-T4 | METRIC 10 STEP CALIBRATION BLOCK, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6061-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3508/6061 | METRIC 5 STEP CALIBRATION BLOCK, 6061-T4 ALUMINUM. STEP SIZES: .5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm. PAD SIZE: 1.0" x 1.0". PROVIDED WITH A DELRIN HOLDER.Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3516/15-5PH | 6 STEP CALIBRATION BLOCK, MATERIAL: 15-5PH STEEL. PAD SIZE: .75" x .75". STEP SIZES: .030", .100", .200", .300", .400", .500" ± .001". Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3523AL | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523CS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 4340 Carbon Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523MAG | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: Magnesium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523SS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 304 Stainless Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523TI | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 6AL-4v Titanium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3529AL | 4 Step Calibration Block, .750", 1.000", 1.250", 1.500". Tolerance= ± .002" MATERIAL: 2024-T3 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3562/321SS | CUSTOM 3 STEP CALIBRATION BLOCK 321 Stainless, STEP SIZES .75" x .75" FACE. STEP THICKNESSES OF 0.025", 0.040" and 0.060" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-CHOKE BLOCK-70/30 | CALIBRATION BLOCK 70/30 COPPER-NICKEL | 1 | |
| AFNDT-CHOKE BLOCK-C | CALIBRATION BLOCK 1018 CARBON STEEL | 1 | |
| AFNDT-CHOKE BLOCK-DUP | CALIBRATION BLOCK 2205 SS (DUPLEX) | 1 | |
| AFNDT-CHOKE BLOCK-S | CALIBRATION BLOCK 303 STAINLESS STEEL | 1 | |
| AFNDT-IIW-01-CASE | Form Fitted Wood Case for IIW Type 1 Calibration Block | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-14542 | PIN STOW LOCK RAT GSE 189 | 11 | |
| AGE13568 | PIN,STOW LOCK-AIR DRIVEN GENERATOR | 1 | |
| AGE13811 | RAT GROUND LOCK PIN | 3 | |
| AGE13880 | PIN, RAT, LOCK, GROUND | 3 | |
| AGE1452-4 | RAT LOCK PIN | 1 | |
| AGE14542 | PIN - STOW LOCK RAT | 11 | |
| AGE15776 | STOW LOCK PIN - RAT | 1 | |
| AGE16505 | PIN-STOW LOCK (RAT) | 1 | |
| AHS29 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| AL29-32 | CALIBRATION BLOCK | 6 | |
| AL35-45 | CALIBRATION BLOCK | 8 | |
| ANDT 1015 | Calibration Block | 3 | |
| ANDT 1049 | Calibration Block | 3 | |
| ANDT 1057 | Calibration Block | 3 | |
| ANDT 1077 | Calibration Block | 4 | |
| ANDT 3006 | Calibration Block | 3 | |
| ANDT1015 | CALIBRATION BLOCK | 3 | |
| ANDT1053 | CALIBRATION BLOCK | 5 | |
| ANDT1057 | CALIBRATION BLOCK | 3 | |
| ANDT1081 | CALIBRATION BLOCK (0.056"-0.067") | 2 | |
| ANDT3004 | Calibration Block | 3 | |
| ANDT3016-B | Calibration Block | 4 | |
| ANDT3019 | Calibration Block | 3 | |
| ANDT4126 | Calibration Block | 2 | |
| ARR-.125SE/1.1WL | NDT CALIBRATION BLOCK | 1 | |
| ASE-WSNDT | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| ASTM B193 | CALIBRATION BLOCK | 1 | |
| AT575-343W | CALIBRATION BLOCK | 1 | |
| ATFY936 | RATCHET HI LOCK, INSTALL (BLK) | 1 | |
| ATHR250M | MINI REVERSABLE RATCHET WRENCH FOR HI-LOCK FASTENE | 1 | |
| ATI3594-2X | HI-LOCK FASTENER RATCHET EXTANSION | 1 | |
| ATI3594-4X | HI-LOCK FASTENER RATCHET EXTANSION | 1 | |
| ATI3594K | RATCHET AND SOCKET KIT HI-LOCK | 3 | |
| ATISK3594K | RATCHET AND SOCKET KIT HI-LOCK | 1 | |
| ATISK359K | RATCHET A D SOCKET KIT HI-LOCK | 1 | |
| ATSK 3594-2X | HI-LOCK FASTENER RATCHET EXTANSION | 1 | |
| ATSK 3594-4X | HI-LOCK FASTENER RATCHET EXTANSION | 1 | |
| ATSK3594K | RATCHET AND SOCKET KIT HI-LOCK | 3 | |
| AUBCRATEFX6 | CRATING FEE FX LOCKER SYSTEM | 1 | |
| AW-05384 | ATR STEPWEDGE CALIBRATION BLOCK | 1 | |
| B27007-15 | Lock-set spoiler acturator | 19 | |
| B27009-3 | CONTROL LOCK ASSEMBLY ELEVATOR ACCIDENTAL OPERATION | 9 | |
| B27065-12 | RAT CB LOCK SET | 11 | |
| B27065-9 | LOCK RAT CIRCUIT BREAKER | 2 | |
| B27065-90 | RAT CB LOCK SET | 1 | |
| B29002-5 | LOCK SET - RESERVOIR VENT VALVE (NOTE: APPLICABLE TO THOSE 737NG'S L/N 1 THRU 1344 THAT HAVE NOT INCORPORATED S/B 737-29 (THE BOEING COMPANY) | 14 | |
| B32019-1 | THIS STRAP ASSEMBLY IS USED TO LOCK THE NLG SHOCK STRUT INTO A DEPRESSURIZED POSITION DURING GROUNDMAINTENANCE OPERATIONS. | 11 | |
| BAT-2303 | 4'' LIBERATOR'' TOOOTHLES RATCHET FOR H-LOCKS | 1 | |
| BH7475 – T7351 | EDDY CURRENT ROTO CALIBRATION TEST BLOCK | 4 | |
| BOERFLCG10 | 5/16IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG12 | 3/8IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG14 | 7/16IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG16 | 1/2IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG18 | 9/16IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG20 | 5/8IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG22 | 11/16IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG24 | 3/4IN LOCK FLXHD RAT BXWR | 1 | |
| BOERFLCG708 | 8PC LOCK FLXHD RAT BXWRSET | 1 | |
| BOERMFLCG10 | 10MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG11 | 11MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG12 | 12MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG13 | 13MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG14 | 14MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG15 | 15MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG16 | 16MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG17 | 17MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG18 | 18MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG19 | 19MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG8 | 12PT 8MM LOCK FLXHD RAT BXWR | 1 | |
| BOERMFLCG9 | 12PT 9MM LOCK FLXHD RAT BXWR | 1 | |
| BPRTR936 | 1/4" RATCHET 6" LOCKING | 2 | |
| C-130-OW-016 | CALIBRATION STANDARD BLOCK | 2 | |
| C12-DEL-3C1N | CALIBRATION BLOCK | 3 | |
| C12-DIS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-PCS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-POT-3C1N | CALIBRATION BLOCK | 3 | |
| C12DIS3C1N | CALIBRATION BLOCK | 3 | |
| C12P0D3C1N | CALIBRATION BLOCK | 1 | |
| C12PCS3C1N | CALIBRATION BLOCK | 3 | |
| C130-CWOW-019 | LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C35003-1 | SAFETY PIN AND FLAG - CHEMICAL OXYGEN GENERATOR (LOCK SET) | 5 | |
| C35003-11 | SAFETY PIN AND FLAG - CHEMICAL OXYGEN GENERATOR (LOCK SET) | 11 | |
| CALBLK-STD-105 | V2/A4-20MM-Ø1.5MM CALIBRATION BLOCK | 1 | |
| CALBLK2.125 | BLOCK, CALIBRATION | 1 | |
| CALIBRATION BLOCK 4.4 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CALIBRATION BLOCK 58.5 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CEF 8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEF-8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEF8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CFM56 9970 | CALIBRATION BLOCK | 1 | |
| CFM56 9970-958-579 | CALIBRATION BLOCK | 2 | |
| CRS 1 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS 2 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.100", 0.250", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS AL2024 | 5 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.200", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T351 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CS-710-503 | PERFORATOR EXTANSION BLOCK | 1 | |
| CS710-503 | PERFORATOR EXTANSION BLOCK | 1 | |
| D2-068 | CABRATION BLOCK SET | 1 | |
| DRT68923 | GROUND LOCK SLEEVE_MLG (CALIBRATION) | 21 | |
| DRT74469 | BLOCK CALIBRATION | 2 | |
| DRT94869 | CALIBRATION BLOCK | 1 | |
| DRT95406 | CALIBRATION BLOCK | 1 | |
| DRT95819 | Calibration Block | 1 | |
| DRT96170 | CALIBRATION BLOCK | 1 | |
| E53-002 | CALIBRATION BLOCK SET EMBRAER | 1 | |
| E53-002C | CALIBRATION BLOCK SET, ALUMINUM 2024-T3, DIMENSION 160 X 135 MM FOR FUSELAGE SINGLE DOUBLER REPAIR’ | 1 | |
| E53-003 | CALIBRATION BLOCK (6SETS) AL 2024 T3 | 1 | |
| E53-003A | CALIBRATION BLOCK SET | 2 | |
| E53-003F | CALIBRATION BLOCK SET | 2 | |
| E53-004 | CALIBRATION BLOCK | 1 | |
| E53‐005 | CALIBRATION BLOCK | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| E54‐004 | CALIBRATION BLOCK MADE FROM TITANIUM ALLOY AND ALUMINUM ALLOY AL 7075 T351 | 1 | |
| E55‐001 | CALIBRATION BLOCK | 1 | |
| E55‐002 | CALIBRATION BLOCK | 1 | |
| E57‐009 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| E57‐010 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| EC-NO-TQ002001 | NDT CALIBRATION BLOCK | 1 | |
| EMB-E54-003 | CALIBRATION BLOCK ALUMINUM 7050-T7452 | 1 | |
| EN 12223 | NDE TECH CALIBRATION BLOCK NO.1 K1 ALUMINUM EN12223 (IIW REF BLOCK) | 1 | |
| EN 27963 | V2 CALIBRATION BLOCK | 1 | |
| EN27963 | CALİBRATION BLOCK (K2) | 1 | |
| EXBD400-50093-005 | CALIBRATION BLOCK | 1 | |
| EXBD400-51325-101 | CALIBRATION BLOCK | 2 | |
| EXGD922-0123-1 | CALIBRATION BLOCK | 1 | |
| EXGM922-5001-23 | CALIBRATION BLOCK | 1 | |
| EXGM922-5004-1 | CALIBRATION BLOCK | 1 | |
| EZR4S12L | 1/4IN RATCHET BIT DRV LOCKING | 1 | |
| EZRMR1224FL | 1/2IN LOCKING RATCHET | 1 | |
| G29012-1 | PROTECTIVE EQUIPMENT - UP LOCKED POSITION, RAM AIR TURBINE (RAT) | 2 | |
| GSE 503 | CALIBRATION BLOCK | 1 | |
| HL001-SWIV | RATCHET-HI LOCK, SWIVEL HEAD 1/4 | 2 | |
| HTC-1 | DIGITAL LCD TEMPERATURE HUMIDITY METER ALARM CLOCK CALENDAR TEMP HTC-1 | 1 | |
| HU81900 | CALIBRATION BLOCK | 1 | |
| IAE2P18879 | CALIBRATION BLOCK | 1 | |
| IAE2R18939 | CALIBRATION BLOCK | 1 | |
| IAE2R19426 | TEST BLOCK- CALIBRATION | 2 | |
| IAE2R19426B | Calibration Block | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IIW-TYPE 2 | CALIBRATION BLOCK | 1 | |
| IIWTYPE1 | CALIBRATION BLOCK | 1 | |
| J27017-5 | CALIBRATION BLOCK | 1 | |
| J27017-6 | CALIBRATION BLOCK | 1 | |
| J27020-10 | Calibration block | 1 | |
| J27020-9 | Calibration block | 1 | |
| K1 | CALIBRATION BLOCK | 4 | |
| K2 | STANDARD UT CALIBRATION BLOCK | 7 | |
| KB132K0967-000 | LOCK RAT | 1 | |
| KER1550ST | Knife, Lock Back, Black Out, Serrated Blade | 1 | |
| LST67997 | 0-1.0001GRADRATCHETSTOPLOCKNUT | 1 | |
| LST68003 | .001"GRADRATCHETSTOPLOCKNUTCA | 1 | |
| LST68025 | 4-5".001 "GRADRATCHETSTOPLOCK | 1 | |
| LTCT30614-01 | Fuel Control, Fuel Pump Instrumentation, Block Fuel Temperature Assembly | 1 | |
| MAB Block-S | CALIBRATION BLOCKS | 1 | |
| MAT/ULT/183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAT/ULT/TP183 | BLOCK, CALIBRATION TEST | 1 | |
| MATULT183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MBBBT100 | ELCH ELASTICITY LAMINATE CHECKER (WITH CALIBRATION BLOCK FS1). | 3 | |
| MD80-53-303 | Calibration Block | 1 | |
| MHS-29-1A-0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MHS‐29‐1A‐0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MODM.RL1U | 1/4" LOCKING RATCHET AND INCH-SIZE SOCKETS FOAM MODULE | 1 | |
| MODM.SL2U | 1/2" LOCKING RATCHET - INCH SOCKETS IN FOAM MODULE | 1 | |
| MP90 /1-3M | CALIBRATION BLOCK | 1 | |
| MT1026-20 | BLOCK HOLD (RAT JACK | 1 | |
| NDE FLAW TECH-STEP WEDGE-1544 | STEP WEDGE CALIBRATION BLOCK ALUMINUM | 1 | |
| NDT 1022 | Calibration Block | 3 | |
| NDT 1023 | Calibration Block | 2 | |
| NDT 1024 | Calibration Block | 2 | |
| NDT 1025 | Calibration Block | 2 | |
| NDT 1026 | Calibration Block | 2 | |
| NDT 1027 | Calibration Block | 2 | |
| NDT 1087-1..4 | Calibration Block | 3 | |
| NDT 1087-14 | CALIBRATION BLOCK | 3 | |
| NDT 1088 | Calibration Block | 1 | |
| NDT 1094-XXX-A | Calibration Block | 1 | |
| NDT 1095 | Calibration Block | 2 | |
| NDT 1099 | Calibration Block | 4 | |
| NDT 3038 | Calibration Block | 4 | |
| NDT 3092 | Calibration Block | 2 | |
| NDT 369 | CALIBRATION BLOCK | 2 | |
| NDT 512 | Calibration Block | 1 | |
| NDT 514 | Calibration Block | 1 | |
| NDT 515 | Calibration Block | 2 | |
| NDT 516 | Calibration Block | 1 | |
| NDT 519 | Calibration Block | 1 | |
| NDT 527 | Calibration Block | 1 | |
| NDT 537 | Calibration Block | 2 | |
| NDT 546 | Calibration Block | 1 | |
| NDT-3014TI | TI CALIBRATION BLOCK 8 STEPS(1-8MM) | 1 | |
| NDT-396 | CALIBRATION BLOCK | 6 | |
| NDT1016 | Calibration Block | 3 | |
| NDT1017 | Calibration Block | 2 | |
| NDT1018 | Calibration Block | 3 | |
| NDT1019 | Calibration Block | 3 | |
| NDT1020 | Calibration Block | 2 | |
| NDT1021 | Calibration Block | 2 | |
| NDT1022 | CALIBRATION BLOCK | 3 | |
| NDT1039-t1 | Calibration Block | 1 | |
| NDT1039-t2 | Calibration Block | 1 | |
| NDT1048 | CALIBRATION BLOCK | 4 | |
| NDT1084 | Calibration Block | 1 | |
| NDT1084-1 | Calibration Block | 1 | |
| NDT1084-2 | Calibration Block | 1 | |
| NDT1084-3 | Calibration Block | 1 | |
| NDT1086-050 | Calibration Block | 3 | |
| NDT1087-1 | CALIBRATION BLOCK | 4 | |
| NDT1087-2 | CALIBRATION BLOCK | 3 | |
| NDT1087-3 | CALIBRATION BLOCK | 3 | |
| NDT1087-4 | CALIBRATION BLOCK | 3 | |
| NDT1087-8 | LFEC EDDY CURRENT CALIBRATION BLOCK | 2 | |
| NDT1096-050 | Calibration Block | 1 | |
| NDT1096-070 | Calibration Block | 1 | |
| NDT1106 | CALIBRATION BLOCK | 2 | |
| NDT194B | CALIBRATION BLOCK | 2 | |
| NDT3001 | Calibration Block | 2 | |
| NDT3004 | BLOCK CALIBRATION | 3 | |
| NDT3012 | Calibration Block | 1 | |
| NDT3021 | Calibration Block | 6 | |
| NDT3023 | Calibration Block | 4 | |
| NDT3024A | Calibration Block | 2 | |
| NDT3038-P1 | Calibration Block | 3 | |
| NDT3049 | Calibration Block | 2 | |
| NDT3050 | Calibration Block | 4 | |
| NDT3055B | CALIBRATION BLOCK | 2 | |
| NDT3065-STL | Calibration Block | 2 | |
| NDT3068 | Calibration Block | 5 | |
| NDT3118 | Calibration Block | 3 | |
| NDT3141 | CALIBRATION BLOCK | 2 | |
| NDT3141G1 | CALIBRATION BLOCK | 2 | |
| NDT3152-A | Calibration Block | 3 | |
| NDT3166-006 | CALIBRATION BLOCK | 4 | |
| NDT3170 | Calibration Block | 5 | |
| NDT3171 | Calibration Block | 5 | |
| NDT3249 | CALIBRATION BLOCK | 1 | |
| NDT3250 | CALIBRATION BLOCK | 1 | |
| NDT3301A | CALIBRATION BLOCK | 1 | |
| NDT3302 | CALIBRATION BLOCK | 1 | |
| NDT3312 | CALIBRATION BLOCK | 2 | |
| NDT369 | Calibration Block | 2 | |
| NDT392 | Calibration Block | 1 | |
| NDT396 | Calibration Block | 6 | |
| NDT4126A | CALIBRATION BLOCK | 1 | |
| NDT5097-A | CALIBRATION BLOCK | 2 | |
| NDT5097-D | CALIBRATION BLOCK | 1 | |
| NDT514 | Calibration Block | 1 | |
| NDT528 | Calibration Block | 1 | |
| NDT531 | Calibration Block | 1 | |
| NDT542 | Calibration Block | 1 | |
| NDT555 | Calibration Block | 1 | |
| NDT562 | Calibration Block | 1 | |
| NDT575 | Calibration Block | 1 | |
| NDT578 | Calibration Block | 1 | |
| NDT7005 | CALIBRATION BLOCK | 2 | |
| NDT7020 | CALIBRATION BLOCK | 1 | |
| NDT7031A | CALIBRATION BLOCK | 2 | |
| NDT7031B | CALIBRATION BLOCK | 2 | |
| NDT753 | CALIBRATION BLOCK P/N: NDT753 | 2 | |
| NDT757A | CALIBRATION BLOCK | 1 | |
| NEC8139 | CALIBRATION BLOCK | 1 | |
| P54-07-1 | SPLIT CALIBRATION BLOCK | 1 | |
| PDL 1037AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 30 FIG 20, 7075-T6 ALUMINUM | 1 | |
| PDL 1037BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 31 FIG 21, 7075-TG ALUMINUM | 1 | |
| PDL 1214J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 22 | 2 | |
| PDL 1215J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 23 PAGE 33, 7075-T6 ALUMINUM | 2 | |
| PDL 1217AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 24 PAGES 34, 7075-T6 ALUMINUM | 1 | |
| PDL 1217BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 25 PAGE 35, CAST ACRYLIC SHEET | 1 | |
| PDL 1217CJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 26 PAGE 36, CAST ACRYLIC SHEET | 1 | |
| PDL 1254J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 21 SHEETS 1-4 20-40-00. FASTENER (HLT116 HI-LOCK FASTENERS WITH SELF LOCKING NUTS). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL 389J | LOCKHEED C-130 CALIBRATION STANDARD 7075-T6 ALUMINUM FIGURE 1 | 2 | |
| PDL 419J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 2 PAGE 4, 2024-T3 ALUMINUM | 1 | |
| PDL 447J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 4, 7075-T6 ALUMINUM | 2 | |
| PDL 449 | CALIBRATION STANDARD: LOCKHEED MARTIN AERONAUTICS | 1 | |
| PDL 449J | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 5, 7075-T6 ALUMINUM | 1 | |
| PDL 457A | CALIBRATION BLOCK PDL 457A | 1 | |
| PDL 457AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 7075-T6 ALUMINUM | 2 | |
| PDL 457SJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 4340 STEEL | 2 | |
| PDL 457SS | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2 304 STAINLESS STEEL | 2 | |
| PDL 459J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 7 PAGE 10, 7075-T6 ALUMINUM | 1 | |
| PDL 843 | CALIBRATION STANDARD, LOCKHEED-GEORGIA CO. | 1 | |
| PDL 843J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 9 FASTENER (HL21-6-4 + TLN 1030.3) | 2 | |
| PDL 917 | LOCKHEED C 130 CALIBRATION STANDARD FIGURE 2 PAGE 14. 7075-T6 ALUMINUM OR EQUIVALENT. | 2 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 1 | |
| PDL 920 | CALIBRATION STANDARD - LOCKHEED-GEORGIA COMPANY | 2 | |
| PDL 941J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 13 PAGE 19, 7075-T6 ALUMINUM | 1 | |
| PDL 944-2 | CALIBRATION BLOCK PDL 944-2 | 1 | |
| PDL 958 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 23 FIGURE 16 2024-T3 ALUMINUM | 1 | |
| PNPGT68 | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| PT-SN-CAB-05 | BLOCK COMPARATOR | 1 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| PWA29546 | WRENCH-DEAERATOR IMPELLER LOCK RETAINER NUT | 2 | |
| PWC30458 | Locking Tool - Pratt & Whitney Canada | 10 | |
| PWC90026 | Test Block Safety Cab - Pratt & Whitney Canada | 6 | |
| QC6755 | CALIBRATION BLOCK 1 | 1 | |
| QC6772 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| QC6852 | CALIBRATION BLOCK | 1 | |
| QC6854 | CALIBRATION BLOCK | 1 | |
| RC-5S1018 | ALUMINUM STEP CALIBRATION BLOCK | 1 | |
| RR40S-SP | ROLLER RATCHET HI-LOCK INSTALLATION TOOL | 3 | |
| RR40SS | ROLLER RATCHET HI-LOCK INSTALLATION TOOL | 1 | |
| RS0824-2024T3 | CALIBRATION BLOCK | 1 | |
| RSMVS12-15 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| RT10-2024T3 | CALIBRATION BLOCK | 1 | |
| RT10-20MM-2024T3-.6/5MM | METRIC 10 STEP CALIBRATION BLOCK 2024-T3 AL | 1 | |
| RT5_75-1018-2_5/12_5MM | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT5_75-7075T6-_25/1_25 | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT8-2024-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-028095 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| S-4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C | 11 | |
| S4933959-529 | PACO PLASTICS S4933959-529 FAA-PMA NATURAL/CLEAR CIRCUIT BREAKER LOCKOUT RING WITH "INOPERATIVE" TAG | 1 | |
| S4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C (PACO PLASTICS & ENGINEERING INC) | 11 | |
| S493959531 | SAFETY LOCK with "Inoperative" tag | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SCT-TB1 | TEST BLOCK - SAFETY CABLE INSTALLER CALIBRATION | 5 | |
| SHX80B | SOFT GRIP HANDLE LOCKING FLEX-HEAD RATCHET (RED) | 1 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SRS0824A | CALIBRATION BLOCK | 3 | |
| ST4340 | CALIBRATION REFERENCE STANDARD BLOCK - MADE FROM 4340 STEEL, MIL-S-5000, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR COMMERCIALLY AVAILABLE). | 5 | |
| ST8870-1 | CALIBRATION BLOCK | 4 | |
| ST8870-4 | CALIBRATION BLOCK | 4 | |
| ST8870-7 | CALIBRATION BLOCK | 4 | |
| ST8870-8 | CALIBRATION BLOCK | 5 | |
| ST8870-9 | CALIBRATION BLOCK | 4 | |
| ST8870B-7 | CALIBRATION BLOCK | 3 | |
| ST8870B-8 | CALIBRATION BLOCK | 3 | |
| ST8870B-9 | CALIBRATION BLOCK | 3 | |
| ST8870C-7 | CALIBRATION BLOCK | 2 | |
| ST8870C-8 | CALIBRATION BLOCK | 2 | |
| ST8870C-9 | CALIBRATION BLOCK | 2 | |
| ST8871 | CALIBRATION BLOCK | 4 | |
| STD-1474 | CALIBRATION / REFERENCE BLOCK | 1 | |
| SWREF1 | CALIBRATION BLOCK | 2 | |
| TB1065-1 | CALIBRATION BLOCKS | 1 | |
| TB1065-4 | CALIBRATION BLOCK | 1 | |
| TB5939-1 | IIW-2 CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-1 IIW-2 | CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-2 | CALIBRATION BLOCK | 1 | |
| TB5939-4 | IIW-2 CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB5939-4 IIW-2 | CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB7150-1 | BEAM CALIBRATION BLOCK | 1 | |
| TB7150-4 | V2 CALIBRATION BLOCK | 1 | |
| THLX72 | 1/4" DRIVE DUAL 80® TECHNOLOGY SOFT GRIP LONG HANDLE LOCKING FLEX-HEAD RATCHET (RED) | 1 | |
| TM405555FG | 4.0MM STEREO MEASUREMENT FORWARD VIEWING INTERCHANGEABLE OPTICAL TIP COLOR: BLACK FOV: 55/55 DEGREES DOF: 5MM TO INF. (0.2" TO INF.) DOV: 0 DEGREES INCLUDES VERIFICATION BLOCK (VER2400C) REQUIRES CALIBRATION REQUIRES STEREO MEASUREMENT SOFTWARE, SOLD SEPA | 2 | |
| TO7284 | ASPIRATOR SPACER BLOCKS | 1 | |
| TP11 | CALIBRATION BLOCK | 1 | |
| TP54 | Split Calibration block-AL, A318/A319/A320/A321 51-10-01-PB6 PG 10 FG 51-10-01-991-005-A SHEET 01, A300-600 PT6 51-63-08 PG 601 FG 601, | 2 | |
| TP54-02-1 | SPLIT PARALLEL CALIBRATION BLOCK | 2 | |
| TP54-07-1 | Split Calibration block- Ti | 2 | |
| TP54-10-1 | SPLIT CALIBRATION BLOCK-AL, 15MM-28MM HOLES, A318/A319/A320/A321 NTM 51-63-07, 7075-T6 | 1 | |
| TQ002001 | NDT CALIBRATION BLOCK | 2 | |
| TQ00201 | CALIBRATION BLOCK | 1 | |
| TRX72 | 1/4DR 72T Q/R LOCK FLEX RAT | 1 | |
| TYSCCS21-28 | CALIBRATION BLOCK FOR ALUMINUM | 1 | |
| U8860182 | Calibration block 99A51107300000 (NDT) | 1 | |
| U8860212 | Calibration block 99A53307274000 (NDT) | 1 | |
| U8880016 | CALIBRATOR, TEST BLOCK 2214M TEST BLOCK. 5-STEP. 1018 CARBON STEEL. METRIC UNIT 2.5 MM, 5.0 MM, 7.5 MM, 10.0 MM, 12.5 MM PRECISION THICKNESS | 1 | |
| ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | 1 | |
| UT-PHT-CALBLK1.WC | WOOD CASE FOR CALIBRATION BLOCK NO. 1 (K1) | 1 | |
| UT-RC-551018-MA | 5 STEP CALIBRATION BLOCK (UT) METRIC 5A(2.5, 5.0, 7.5, 10.0 & 12.5MM) MATERIAL: 1018 CARBON STEEL | 1 | |
| UT-RC-5S-CAL | 5-STEP CALIBRATION BLOCK, DIMENSIONAL CALIBRATION AND SERIALIZATION | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UT-RC-5S1018 | ALUMINUM STEP CALIBRATION LOCK WITH AT LEAST 0.10 | 1 | |
| UT-RC-5S7075-C1 | 5-STEP CALIBRATION BLOCK, 7075 ALUMINUM | 1 | |
| UT-RC-5STITANIUM | 5-STEP CALIBRATION BLOCK, TITANIUM | 1 | |
| UT2009 | CALIBRATION TEST BLOCK | 1 | |
| V-2 | BLOCK 2, CALIBRATION | 2 | |
| V1 | BLOCK 1, CALIBRATION | 3 | |
| V1 ALUMINUM STANDARD | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| V1-EN-12223 | CALIBRATION BLOCK | 1 | |
| V1-IIW | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V2 | BLOCK 2, CALIBRATION | 2 | |
| V2(K2) | CALIBRATION BLOCK | 1 | |
| V2-K2 | CALIBRATION BLOCK | 1 | |
| V2A4.12.5.CS | BLOCK 2, CALIBRATION | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
