| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A2412G01 | HOLDING RING | 6 | |
| 856A3413P02 | HOLDING RING | 1 | |
| PWC30269 | HOLDING RING | 8 | |
| PWC71004 | holding ring | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) A11126 | TOOL TOOL -HOLDING, STEERING ACTUATO (CALIBRATION) (CALIBRATION) | 1 | |
| 11MIT65B01221-4 | HOLDING WRENCH - METERING ROD ANCHOR TUBE, NOSE LANDING GEAR | 1 | |
| 1722A35 | SPRING CLIP HOLDING CAP. DIA. 5/8-1"1/4 WHITE PLASTIC-COATED STEEL | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 510-010 | PIPEFITTER'S CHAIN VISE, OR OTHER HOLDING STAND- TO HOLD RESERVOIR DURING DISSASSEMBLY/ASSEMBLY (AND SAFETY) | 1 | |
| 65885T2 | Bearing Installation Holding Fixture | 1 | |
| 65885T3 | Bearing Removal Holding Fixture | 1 | |
| 7821 | TOOL-HOLDING VALVE DURING ASSEMBLY | 2 | |
| 6877005 | HOLDING FIXTURE, VALVE END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF VALVE END COMPONENTS. | 1 | |
| 6877006 | HOLDING FIXTURE, CHECK VALVE PLUG HOLDS FUEL NOZZLE DURING MACHINING OF CHECK VALVE PLUG WELD. | 1 | |
| 6877010 | HOLDING FIXTURE, TIP END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF TIP END COMPONENTS. | 1 | |
| 6877011 | HOLDING FIXTURE, FINAL TEST HOLDS FUEL NOZZLE/COMPONENTS ON SPRAY CHAMBER DURING ASSEMBLY AND TESTING. | 1 | |
| 6877012 | HOLDING FIXTURE, PRESSURE TEST HOLDS FUEL NOZZLE COMPONENTS DURING TESTING AND CLEANING OPERATIONS. | 1 | |
| 6877028 | STEM HOLDING FIXTURE HOLDS WEAR SLEEVE AND FUEL NOZZLE IN POSITION DURING TACK WELD OPERATION. | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 70700-77316-041 | TAIL ROTOR SPRING CAPSULE HOLDING CLAMP | 1 | |
| 856A 2421G02 | RING HOLDING STAGE 1 OUTER STATIONARY AIR SEAL | 4 | |
| 856A 2826G03 | FIXTURE HOLDING NO.4 BEARING | 2 | |
| 856A 3358G03 | FIXTURE HOLDING NO.4BEARINGINNER RACE BOLT | 2 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035G01 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 9 | |
| 856A1430G02 | IGB HOLDING FIXTURE - BEARING REMOVAL | 7 | |
| 856A2377G01 | FIXTURE, CENTERING AND HOLDING - ROTATING SEALS(CENTERING AND HOLDING FIXTURE) | 1 | |
| 856A2412 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL AND TURBINE | 1 | |
| 856A2412G01 | Ring, Holding - Stg 1 Outer Stationary Air Seal and Turbine Shroud Support (holding ring) | 6 | |
| 856A2412G02 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL AND TURBINE | 1 | |
| 856A2421G02 | HOLDING RING - OUTER STATIONNARY | 4 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2747G01 | RING HOLDING STAGE 1 OUTER STA AIR | 2 | |
| 856A2826 | HOLDING FIXTURE NO.4 BEARING | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A2956G01 | HOLDING RING - FAN RETAINING RING | 16 | |
| 856A3358 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 1 | |
| 856A3358G03 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS(HOLDING FIXTURE)OBSELETE REPLACED BY 856A3358G04 THEN 856A3358G05 | 2 | |
| 856A3358G04 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 2 | |
| 856A3358G05 | Fixture, Holding - No. 4 Bearing Inner Race Bolts (holding fixture) | 4 | |
| 856A3413G01 | HOLDING RING -NO.4 BEARING ROLLERS | 1 | |
| 856A3413P02 | - RING, HOLDING - NO. 4 BEARING ROLLERS | 1 | |
| 856A3751 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751 G02 | Holding Ring - Stage 1 Outer Sta Air Seal And Turb | 1 | |
| 856A3751G01 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751G02 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751G03 | RING HOLDING STAGE 1 OUTER STA AIR SEAL AND TURBINE SHROUD sUPPORT | 7 | |
| 856A3751G04 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL | 2 | |
| 856A3761G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG2 | 6 | |
| 856A3764G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG3 | 8 | |
| 856A3794 | RING, HOLDING STG 1 OUTER | 1 | |
| 856A3794G01 | RING, HOLDING STG. 1 | 9 | |
| 906080 | MEASURING DEVICE WITH HOLDING FIXTURE | 1 | |
| 8819958000 | RING HOLDING TOOL | 1 | |
| 8C2185 | FIXTURE, HOLDING – STG 1 VSV RING | 1 | |
| 92700-10316-041 | SPRING CAPSULE HOLDING CLAMP | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 98A08001005000 | HOLDING SET - MEASURING CORD | 5 | |
| 98A08001005001 | Set-holding measuring cord dispositif p0Ur | 2 | |
| 98A08001005002 | Set-holding measuring cord dispositif p0Ur | 1 | |
| 98A76103500000 | RINGS AND COMPRESSED SPRINGS HOLDING TOOL | 1 | |
| A11126 | TOOL -HOLDING, STEERING ACTUATOR | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| ARG7076-5511 | Metering Valve Test / Holding Fixture | 2 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 1 | |
| C52004-1 | HOLDING FIXTURE - COMPRESSED SPRING CARTRIDGE | 11 | |
| CE4-1280 | RING HOLDING LPT | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-4 | HOLDING FIXTURE - FWD TRUNNION BEARING H | 10 | |
| F80096-7 | HOLDING FIXTURE ASSY-MLG FWD TRUNNION BEARING | 6 | |
| FXT-09694 | BEARING HOLDING FIXTURE | 1 | |
| FXT09694 | BEARING HOLDING FIXTURE | 1 | |
| G32032 | HOLDING EQPT -0 INNER CYLINDER AND METERING ROD, | 1 | |
| G32032-1 | HOLDING EQUIPMENT - INNER CYLINDER AND METERING ROD, WING LANDING GEAR | 4 | |
| HS7635 | RING - BLADE GEAR HOLDING | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| MBEU57834 | HOLDING FIXTURE-FIRING UNITS | 1 | |
| MT091-1 | ENGINE RING GEAR HOLDING TOOL | 3 | |
| PWC32864 | Fix. Holding Bearing | 1 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC42079 | Holding Fixture No. 3 bearing housing | 1 | |
| PWC71016 | HOLDING FIXTURE -BEARING | 1 | |
| RB 92700-10316- 041 | SPRING CAPSULE HOLDING CLAMP | 2 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| T-27289 | FIXTURE, HOLDING METERING VALVE ASSY PRE | 1 | |
| T-8819958000 | Ring Holding Tool | 1 | |
| T103263 | BEARING HOLDING BAR | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T462168 | Bearing Holding Fixture | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
