| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) RRT028135 | Wrench (CALIBRATION) (CALIBRATION) | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) J47346 | CASTELLATED WRENCH (CALIBRATION) | 1 | |
| (CALIB) 046140 | OFFSET WRENCH (CALIBRATION) | 1 | |
| (CALIB) 1018120029 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 109G6220G01-111 | WRENCH ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) 10T-ICDI | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 130104 | TORQUE WRENCH 40 -200NM (CALIBRATION) | 2 | |
| (CALIB) 2743638 (150-1000 IN.LBS) | TORQUE WRENCH BR64469 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 31340 | WRENCHPIPE STRAP 1-8 TO 2 INCH (CALIBRATION) | 1 | |
| (CALIB) 510022136 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 5120-12-150-1841 | DREMOMETER TORQUE WRENCH 50-250 LBF. INS (CALIBRATION) | 1 | |
| (CALIB) 6004MFRMH | MICRO-ADJUSTABLE CLICK TYPE TORQUE WRENCHES ( SQUARE DRIVE: 3.4" )( TORQUE RANGE: 100-600 FT.-LBS. )( INCREMENTS: 5 ) (CALIBRATION) | 2 | |
| (CALIB) 6008C | STANLEY PROTO TORQUE WRENCHES 10 -80 FT.IBS (CALIBRATION) | 1 | |
| (CALIB) 6060A (10-50 IN.LBS) | TORQUE WRENCH 0513060458 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 6064C (40-200 IN.LBS) | TORQUE WRENCH DMA 03734 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 6066C (100-1,000 IN.LBS) | TORQUE WRENCH DME 27173 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 608148383 | STAHLWILLE TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 608148565 | STAHLWILLE TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 64746305 | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 657105_200 AND 121631396 | TORQUE WRENCH HANDLE (CALIBRATION) | 1 | |
| (CALIB) 6796529 | WRENCH-SPANNER, TURBINE REAR BEARING CAMP NUT (CALIBRATION) | 1 | |
| (CALIB) 6796530 | SOCKET WRENCH FACE SPANNER (CALIBRATION) | 1 | |
| (CALIB) 6799621 | WRENCH (CALIBRATION) | 1 | |
| (CALIB) 6SD800NM | Torque Wrench (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 710/25 | STAHWILLE TORQUE WRENCHES 55-185 FT.IBS (CALIBRATION) | 1 | |
| (CALIB) 730N/10 | 730N/10 T/WRENCH 20-100NM (CALIBRATION) | 3 | |
| (CALIB) 730N/2 | STAHLWILLE TORQUE WRENCH 4 - 20NM (CALIBRATION) | 2 | |
| (CALIB) 797300901 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 8069 | ADJUSTABLE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 8070 | ADJUSTABLE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 8071 | CENTRAL NUT ADJUSTABLE WRENCHES 4" (CALIBRATION) | 1 | |
| (CALIB) 8072 | ADJUSTABLE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 856A3782G02 | WRENCH (CALIBRATION) | 1 | |
| (CALIB) 918913203 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 944690 | CRAFTSMAN TORQUE WRENCHES 0-75 FT.IBS (CALIBRATION) | 2 | |
| (CALIB) 9839-0030 | NOSE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 9854064 | STAHLWILLE TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 98A57104004000 | ADAPTOR ADAPTOR-TORQUE WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98AMS172327002 | WRENCH WRENCH-ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104080000 | SOCKET WRENCH ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32303000000 | SOCKET WRENCH, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32403005000 | SOCKET WRENCH ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54503000000 | WRENCH PYLON REMOVAL-WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203013000 | TORQUE WRENCH SET PW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203014000 | TORQUE WRENCH SET CFM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27108864000 | WRENCH SET R/I AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503000000 | PYLONREM PYLON REMOVAL - WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503001000 | WRENCH WRENCH-PYLON REMOVAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503004000 | WRENCHES WRENCHES CHEST - PYLON REM-INST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109001000 | SOCKET WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001000 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001001 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001020 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001022 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001024 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001026 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001028 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203008000 | TORQUE WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003000000 | WRENCH WRENCH,HP MANIFOLD FILTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54001000000 | WRENCH SET, PYLON INSTAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109007000 | WRENCH-GROOVE NUT, THS SCREW JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109011000 | WRENCH - LAT BAR, HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203000000 | WRENCH WRENCH SET,TORQUE-RR(MSN 1,2,4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203000001 | WRENCH WRENCH SET,TORQUE-RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203005000 | WRENCH WRENCH SET,TORQUE-EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503001000 | PYLON R/I WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503001001 | PYLON R/I WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503001002 | PYLON R/I WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109007000 | WRENCH KIT-THS REAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71203002000 | TRQE WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A32045-96 | WRENCH SPANNER - NLG WHEEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AHX-T550 | HYDRAULIC WRENCH (CALIBRATION) | 1 | |
| (CALIB) ANA1620 | TORQUE WRENCH 20 - 400NM (CALIBRATION) | 2 | |
| (CALIB) ATECH1FS100 | SNAPON ELECTRONIC TORQUE WRENCH (ATECH1FS100) 4~100 INLB (CALIBRATION) | 1 | |
| (CALIB) ATECH2FR100 | TORQUE WRENCH DIGITAL 3/8 DRIVE 60-1200 LB IN 5-100 LB FT RANGE (CALIBRATION) | 1 | |
| (CALIB) ATECH2FS100 | SNAPON ELECTRONIC TORQUE WRENCH (ATECH2FS100) 60~1200INLB (CALIBRATION) | 1 | |
| (CALIB) BLPSTWRKT | 2 PC STRAP WRENCH (CALIBRATION) | 1 | |
| (CALIB) BSBMIEQM | 1/2 INCH TORQUE WRENCH ANGLE GAUGE TOOL,360 ADJUSTABLE (CALIBRATION) | 1 | |
| (CALIB) C2FR14M | Torque Wrench (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C3FR250F | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) C71022-6 | TORQUE WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CCM150 | STURTEVANT RICHMONT TORQUE WRENCH 30-150 FT.IBS (CALIBRATION) | 2 | |
| (CALIB) D3F250FM | TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) DBHM9 | DOUBLE BALL MM HEX WRENCH SET (CALIBRATION) | 1 | |
| (CALIB) DBHS13 | DOUBLE BALL SAE HEX WRENCH SET (CALIBRATION) | 1 | |
| (CALIB) F0F89F 7296 | SNAP ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) FC32B | CROWFOOT WRENCH 3/8 DRIVE 1 IN OPEN END (CALIBRATION) | 1 | |
| (CALIB) GQT2R1000MP | TORQUE WRENCHES (CALIBRATION) | 1 | |
| (CALIB) GQT2R1000NP | TORQUE WRENCH 200 TO 1000 LB-IN (CALIBRATION) | 1 | |
| (CALIB) GQT2R200NP | TORQUE WRENCH 40-200 IN/LBS (CALIBRATION) | 1 | |
| (CALIB) GQTR1000NP | TORQUE WRENCHES (CALIBRATION) | 2 | |
| (CALIB) J47023 | WRENCH (CALIBRATION) | 1 | |
| (CALIB) J6066CXCERT | 200-1000 IN/IBS TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) M 250 C 7804 -380 A (43 V) | ADJUSTABLE TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) MBEU82194-1 | ADU KIT TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) MD15I/18 | 0-15 INCH POUNDS TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) MG1250 | 3/4IN IMPACT WRENCH (CALIBRATION) | 1 | |
| (CALIB) MODEL 1300F | JOHNINCH TOKYO TORQUE WRENCHES 0-1300 KGF.CM (CALIBRATION) | 1 | |
| (CALIB) MON 1932 | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) PD2501 | PRW WRENCH (CALIBRATION) | 1 | |
| (CALIB) PW36C | 36” EXTERNAL PIPE WRENCH (SNAP ON TOOLS) (CALIBRATION) | 1 | |
| (CALIB) PWC45215 | WRENCH KIT (CALIBRATION) | 1 | |
| (CALIB) QD1200A | TORQUE WRENCH 40-200 IN/LBS (CALIBRATION) | 1 | |
| (CALIB) QD1R200 | 1/4" DRIVE SAE ADJUSTABLE CLICK-TYPE FIXED RATCHET TORQUE WRENCH (40–200 IN-LB) (CALIBRATION) | 1 | |
| (CALIB) QD1R50 | TORQUE WRENCH (CALIBRATION) | 3 | |
| (CALIB) QD2R1000A | TORQUE WRENCH (CALIBRATION) | 3 | |
| (CALIB) QD2R200 | TORQUE WRENCH 40-200 IN/LBS (CALIBRATION) | 1 | |
| (CALIB) QD3R1600A | 320-1600 IN/IBS TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) QD3R2500A | 500-2500-IN/IBS TORQUE WRENCH (CALIBRATION) | 3 | |
| (CALIB) QD3R250A | TORQUE WRENCH 50-250FTLB (CALIBRATION) | 2 | |
| (CALIB) QDRIVER2A | TORQUE WRENCH 20 TO 100 INCH.OZ (CALIBRATION) | 2 | |
| (CALIB) QJR2100E | SNAP-ON TORQUE WRENCHES 15-100 FT.IBS (CALIBRATION) | 2 | |
| (CALIB) QJR3200C | SNAP ON TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) R.306-25D | FACON TORQUE WRENCH 5 - 25NM (CALIBRATION) | 2 | |
| (CALIB) RF6912W | WRENCH (CALIBRATION) | 1 | |
| (CALIB) RSE1071 | Wrench Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SA50-170 | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) SAM-03 | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) SAM2 -20 | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) SAM50-170 | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) SWE8200 | POWER WRENCH (CALIBRATION) | 1 | |
| (CALIB) TE12A | SNAPON DIAL TORQUE WRENCH(TE12A) 0 ~ 150INLB (CALIBRATION) | 1 | |
| (CALIB) TE250 | SNAP-ON TOR0UE WRENCH 0-250IBF (CALIBRATION) | 1 | |
| (CALIB) TE50FA | SNAP-ON TOR0UE WRENCH 0-50IBF (CALIBRATION) | 2 | |
| (CALIB) TEC2R100 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) TEC3R250 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) TEC602FUA | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) TORCOFIX-SE | 75-400NM TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) TTN-60126 | WRENCH RACHET, NON REVERSIBLE SINGLE HEAD 7-8 INCH (CALIBRATION) | 1 | |
| (CALIB) TUS713079 | TORQUE WRENCHES (CALIBRATION) | 1 | |
| (CALIB) TW 213 | ROEBUCK USA TORQUE WRENCH 30-200 IBF (CALIBRATION) | 2 | |
| (CALIB) TW213 | TORQUE WRENCH 30-150LBS/FT 1/2" DRIVE (CALIBRATION) | 2 | |
| 6SD800NM | TORQUE WRENCH (CALIBRATION) | 3 | |
| 701/25 | STAHWILLE TORQUE WRENCHES 55-185 FT.IBS (CALIBRATION) | 1 | |
| TE250FU | SNAP-ON TOR0UE WRENCH 0-250IBF (CALIBRATION) | 5 | |
| TE602FUA | TORQUE WRENCH (CALIBRATION) | 5 | |
| TECH2R100 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 4 | |
| TECH3R250 | SNAP- ON TORQUE WRENCH (CALIBRATION) | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
