| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C32035-18 | WRENCH ROD | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| SPL-12396 | ROD END BEARING SOCKET WRENCH | 1 | |
| 1198-505 | ROD END TORQUE WRENCH ADAPTER | 1 | |
| 11MIT65B01221-4 | HOLDING WRENCH - METERING ROD ANCHOR TUBE, NOSE LANDING GEAR | 1 | |
| 6004MFRMH | CDI TORQUE PRODUCTS 6004MFRMH TORQUE WRENCH 3/4 DRIVE 100-600 FEET-LB. | 4 | |
| 6205-A701-2650 | PISTON ROD MAINTINING WRENCH | 1 | |
| 6795635 | WRENCH INSTALLATION AND REMOVAL GAS PRODUCER TURBINE TIE BOLT NUT | 2 | |
| 6795637 | WRENCH INSTALLATION AND REMOVAL GAS PRODUCER TURBINE REAR BEARING RETAINING NUT | 2 | |
| 6795644 | WRENCH INSTALLATION AND REMOVAL GAS PRODUCER TURBINE FRONT BEARING RETAINING NUT | 2 | |
| 6798045 | HOLDING GAS PRODUCER TURBINE WRENCH | 2 | |
| 6798046 | WRENCH-BEARING LOCKNUT, GAS PRODUCER | 2 | |
| 6798802 | WRENCH - FUEL PRODUCER | 1 | |
| 6891351 | WRENCH - HOLDING, GAS PROD TURBINE | 2 | |
| 6F6330G00131 | MGB RODS ADJUSTEMENT SPECIAL WRENCH | 1 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 833561-1 | TENSION ROD ADJUSTMENT WRENCHES KIT | 1 | |
| 853-100-113-0 | WRENCH,NUT-TURBINE TIE-ROD | 1 | |
| 98D55109010000 | RODEND SUPORT STRUT WRENCH | 14 | |
| 98D71203004000 | WRENCH-REM INST ROD | 11 | |
| A32040-10 | WRENCH - ROD END | 1 | |
| A32040-12 | WRENCH - ROD END | 1 | |
| A32040-15 | WRENCH - ROD END | 1 | |
| A32040-18 | WRENCH - ROD END | 1 | |
| A32040-4 | WRENCH - ROD END | 1 | |
| A32040-7 | WRENCH - ROD END | 3 | |
| AMC-51 | DALE PRODUCTS INC AMS-51 WRENCH | 1 | |
| C32038-42 | Downlock Rod End Wrench | 5 | |
| C32038-43 | Downlock Rod End Wrench | 5 | |
| C32038-44 | Uplock Rod End Wrench | 6 | |
| C32038-45 | RETRACT ROD END WRENCH | 7 | |
| C32038-5 | ROD END WRENCH | 4 | |
| C32038-55 | Retract Rod End Wrench | 6 | |
| C32038-81 | RETRACT ROD END WRENCH | 2 | |
| C32038-82 | Downlock rod end wrench | 1 | |
| C32038-83 | Uplock rod end wrench | 1 | |
| C76002-7 | TIE ROD NUT WRENCH | 1 | |
| CAT5925-2 | WRENCH, ROD END | 1 | |
| CLE23462 | WRENCH FOR ROD | 1 | |
| EMB-01114-001 | MLG MAIN LOCKING ROD NUT REMOVAL/INSTALLATION WRENCH (GSE 129) | 1 | |
| F70312-35 | WRENCH - CROWFOOT, BRAKE ROD RETENTION NUT | 5 | |
| F71313 | SOCKET WRENCH ROD END BEARING | 2 | |
| F71313-10 | Wrench - Socket, Rod End Bearing | 1 | |
| F71313-11 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-12 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-13 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-14 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-15 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-16 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-17 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-18 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-19 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-20 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-21 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-22 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-23 | Wrench - Socket, Rod End Bearing | 1 | |
| F71313-24 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-25 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-3 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-31 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-32 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-33 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-34 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-35 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-36 | Wrench - Socket, Rod End Bearing | 5 | |
| F71313-37 | Wrench - Socket, Rod End Bearing | 4 | |
| F71313-38 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-39 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-40 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-41 | Wrench - Socket, Rod End Bearing | 4 | |
| F71313-42 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-43 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-44 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-45 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-46 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-47 | Wrench - Socket, Rod End Bearing | 5 | |
| F71313-48 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-49 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-50 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-51 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-52 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-52-5 | ROD END BEARING SOCKET WRENCH | 1 | |
| F71313-55 | WRENCH - SOCKET, ROD END BEARING | 4 | |
| F71313-6 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-7 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-8 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-9 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-XX | Wrench -Socket. Rod End Bearing | 1 | |
| F7131333 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F72763 | WRENCH ORFICE ROD ST | 1 | |
| F72763-500 | Spanner wrench-upper seal retainer orifice rod，NLG | 3 | |
| F72763-501 | WRENCH ORFICE ROD ST | 1 | |
| F72764-500 | Spanner wrench-lower seal retainer，orifice rod NLG | 3 | |
| F72764-501 | WRENCH ORFICE ROD ST | 1 | |
| F72765 | WRENCH ORFICE ROD ST | 1 | |
| F72766 | WRENCH ORFICE ROD ST | 1 | |
| F72773 | WRENCH ROD END ACT. | 1 | |
| F72776 | WRENCH -0 NOSE GEAR ACTUATOR ROD END. USED TO | 1 | |
| F72777 | WRENCH ROD-END ACTUA | 1 | |
| F72798 | ROD END WRENCH -0 MLG ACTUATOR USED TO INSTALL | 1 | |
| F72798-5 | WRENCH ROD-END ACTUA | 1 | |
| F72798-6 | WRENCH ROD-END ACTUA | 1 | |
| F72798-7 | WRENCH ROD-END ACTUA | 1 | |
| F72798-8 | WRENCH ROD-END ACTUA | 1 | |
| J32059-1 | SPANNER WRENCH AND SOCKET - ROD GLAND NUT AND BOLT, MAIN LANDING GEAR ACTUATORS | 1 | |
| J32059-7 | SPANNER WRENCH AND SOCKET - ROD GLAND NUT AND BOLT, MAIN LANDING GEAR ACTUATORS | 1 | |
| L32 | EXTENSION,SOCKET WRENCH;BOTH ENDS 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE; STEEL;RIGID;|2.90" MIN AND 4.12" MAX;1.000" MAX;MANUAL TOOL;PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT; CHROMIUM;PROFESSIONAL/INDUSTRI | 4 | |
| M46252 | HOLDING WRENCH ACTUATOR ROD | 1 | |
| PWA 30051 | WRENCH FRONT COMPRESS0R DRIVE TURBINE TIE ROD | 1 | |
| PWA25559 | EXTENSION - HPC TIEROD NUT WRENCH_[PWA25559] | 2 | |
| PWA25844 | WRENCH - LPC, TIEROD NUTS_[PWA25844] | 2 | |
| PWA26309 | GUIDE - HPC, TIEROD NUT WRENCH_[PWA26309] | 2 | |
| PWA26458 | WRENCH - HPC, TIEROD NUT_[PWA26458] | 2 | |
| PWA27026 | WRENCH,PROTECTOR - HPT TIEROD NUT_[PWA27026] | 2 | |
| PWA27794 | WRENCH, TORQUE - LPC, TIEROD 1.5 STG_[PWA27794] | 2 | |
| PWA27996 | GUIDE - HPC, TIEROD NUT WRENCH (5TH STG)_[PWA27996] | 2 | |
| PWA28121 | WRENCH - LPT TIEROD NUT_[PWA28121] | 1 | |
| PWA45203 | WRENCH #NAME? TIE ROD NUTS | 5 | |
| PWA45203 REV B | WRENCH -FAN TIE ROD NUTS | 1 | |
| PWA51652 | WRENCH,TIEROD | 1 | |
| PWA51658 | WRENCH, TIEROD | 1 | |
| RB6795635 | Install/Removal Gas Producer Tail Rotor Bearing Nut Tie Bolt Nut Wrench | 2 | |
| RB6798045 | Holding Gas Producer Turbine Wrench | 2 | |
| RB6798046 | Wrench-Bearing Locknut, Gas Producer | 2 | |
| RB6893358 | Wrench, Install & Removal Gas Producer Turbine Frt. Bearing Retaining Nut | 2 | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | 1 | |
| SPL-12450 | Wrench - Rod End | 1 | |
| SPL-12584 | ROD END BEARING SOCKET WRENCH | 1 | |
| SPL-9367 | Wrench - Rod End | 1 | |
| ST2580-103 | WRENCH - ROD END | 1 | |
| STI3216 | ADAPTER TORQUE WRENCH MGB ROD | 1 | |
| SVOTRIM1315 | 13MM 15MM TIE ROD WRENCH | 1 | |
| SVOTROM2224 | 22MM 24MM TIE ROD WRENCH | 1 | |
| WW500 | WRACK WRENCH TIE ROD TOOL | 1 | |
| f 71313-10 | Socket Wrench Rod Bearing | 1 | |
| f 71313-12 | Socket Wrench Rod Bearing | 2 | |
| f 71313-16 | Socket Wrench Rod Bearing | 2 | |
| f 71313-8 | Socket Wrench Rod Bearing | 3 | |
| f71313-10 | Socket Wrench Rod Bearing | 1 | |
| f71313-12 | Socket Wrench Rod Bearing | 2 | |
| f71313-16 | Socket Wrench Rod Bearing | 2 | |
| f71313-8 | Socket Wrench Rod Bearing | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
