| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HS8273 | WRENCH CONTROL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U144765 | WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 13 | |
| 0U144768 | HOLDING WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 11 | |
| 0U145409 | SOCKET WRENCH FLIGHT CONTROL | 18 | |
| 0U300765 | WRENCH, BRAKE CONTROL | 7 | |
| 109-0135-13-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 1 | |
| 109-3101-75-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| 109-3101-75-101 | WRENCH, FLIGHT CONTROLS SERVOACTUATOR JOINT REMOVAL/INSTALLATION GF-79-00 | 2 | |
| 109-3130-75-101 | WRENCH, FLIGHT CONTROLS SERVO-ACTUATOR JOINT REMOVAL / INSTALLATION | 1 | |
| 170T06310-401 | WRENCH - RECONNECT, AILERON / ELEVATOR CONTROLS | 2 | |
| 196K8009 | WRENCH, FUEL CONTROL SHAFT | 1 | |
| 196K8009 REV NC | WRENCH, FUEL CONTROL SHAFT | 1 | |
| 280353 | WRENCH - FUEL CONTROL UNIT ADJUSTER | 4 | |
| 280353PM | WRENCH - FUEL CONTROL UNIT ADJUSTER | 1 | |
| 2C14244 | WRENCH SET-MAIN ENGINE CONTROL | 1 | |
| 2C6276 | WRENCH SET-FUEL CONTROL PUMP | 1 | |
| 2C6276G03 | WRENCH SET FUEL CONTROL PUMP | 2 | |
| 2C6276P03 | WRENCH SET, FUEL CONTROL PUMP | 2 | |
| 2MIT65B82106 | TORQUE WRENCH ADAPTER - AILERON CONTROL | 1 | |
| 332A93-3300-20 | T.R.H"WRENCH SIDE SERVO CONTROL | 2 | |
| 332A93-3694-20 | "TRH" WRENCH SIDE SERVO-CONTROL | 1 | |
| 332A93369420 | TRH WRENCH SIDE SERVO-CONTROL | 1 | |
| 365A93-3347-00 | WRENCH,TGB ATTACHMENT CONTROL | 1 | |
| 365A93334700 | WRENCH,TGB ATTACHMENT CONTROL | 1 | |
| 4MIT65B82106 | TORQUE WRENCH ADAPTER - LOAD LIMIT AILERON CONTROL | 1 | |
| 6798248 | WRENCH - FUEL CONTROL MOUNTING NUT | 1 | |
| 6798292-B | HINGED WRENCH WITH 5/16 BOX END FUEL CONTROL REMOVAL | 1 | |
| 6799538 | WRENCH BOX SPEED SENSITIVE CONTROL SWITCH | 2 | |
| 23055346 | FUEL CONTROL GOVERNOR WRENCH | 2 | |
| 833274-1 | WRENCH - ADJUSTER, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K | 2 | |
| 833275-1 | WRENCH - JAMNUT, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K - 737-100/200/300/400/500 | 1 | |
| 856A1303G01 | WRENCH TOOLREMOVAL MAINENG.CONTROL/FUELP | 1 | |
| 856A1469 | WRENCH SET, RUN ON/OFF MAIN ENG. CONTROL/FUEL PUMP UNIT | 4 | |
| 856A1469 REV F | WRENCH SET, RUN ON/OFF MAIN ENG. CONTROL/FUEL PUMP UNIT | 1 | |
| 856A1469G01 | WRENCH SET REM MEC/FUEL PUMP NUT (CONTROL TOOL)) | 21 | |
| 856A1469G02 | WRENCH SET - RUN ON/OFF, MAIN ENGINE CONTROL - CFM56-3 ENGINE | 15 | |
| 856A2310G02 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL (RATCHET WRENCH) | 10 | |
| 856A2310G03 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL (RATCHET WRENCH) | 1 | |
| 856A2501 | WRENCH-VBV MANUAL CONTROL | 5 | |
| 856A2501 G01 | Wrench Ratchet Dual Purpose VBV Manual Control | 27 | |
| 856A2501G01 | WRENCH VBV MANUAL CONTROL | 27 | |
| 895-3101-05-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 1 | |
| 895-3101-05-101 | WRENCH SET, FLIGHT CONTROL SERVOACTUATOR CLUTCH ADJUSTMENT GF-82-00 | 1 | |
| 98A27608001000 | HOOK WRENCH SPOILER AND OUTER AIRBRAKE SERVO CONTROL | 3 | |
| 98A27608002000 | PEG WRENCH SPOILER AND OUTER AIRBRAKE SERVO CONTROL | 2 | |
| 98F27003001000 | WRENCH-AILERON SERVO CONTROL ELECTRICAL CONNECTOR | 18 | |
| A21999 | WRENCH, FLIGHT CONTROLS SERVOACTUATOR JOINT REMOVAL/INSTALLATION | 1 | |
| A27087-1 | WRENCH - CONTROL LEVER, SPEED BRAKE | 4 | |
| A73002 | WRENCH MAIN ENGINE CONTROL CF6-80C2 REMOVAL AND INSTALLATION | 1 | |
| A73002-10 | WRENCH - MAIN ENGINE CONTROL, CF6-80C2 REMOVAL/INSTALLATION | 7 | |
| A78012-1 | WRENCH - CROWFOOT, TUBING NUT, FLOW CONTROL, THRUST REVERSER | 1 | |
| AB27001-VV7 | WRENCH - AILERON SERVO CONTROL ADJUSTMENT | 1 | |
| AB27001-VX9 | HOLDING WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 1 | |
| AGE-00053-001 | wrench reconnect ail/elev controls | 1 | |
| C27025-1 | Torque Wrench Equipment -Rudder Power Control Unit Attachment | 11 | |
| C27042-1 | Wrench - Torque Equipment, Rudder Power Control Unit Attachment | 15 | |
| C27061-1 | Adapter - Wrench, Flight Spoiler Actuator Power Control Unit | 6 | |
| C6747 | WRENCH-AILERON SERVO CONTROL ELECTRICAL CONNECTOR | 1 | |
| C76002-21 | CONTROL SHAFT NUT WRENCH | 1 | |
| C76002-22 | RIGHT CONTROL SHAFT WRENCH | 1 | |
| C76002-6 | RIGHT CONTROL SHAFT WRENCH | 2 | |
| C76002-8 | CONTROL SHAFT NUT WRENCH | 2 | |
| CTECH1FR240A | 1/4" DRIVE FLEX-HEAD CONTROLTECH® INDUSTRIAL TORQUE WRENCH(1-20-FT-IB) | 1 | |
| CTECH2MR1200 | 3/8" DRIVE FIXED RATCHET HEAD DIGITAL, MICRO SIZE CONTROLTECH® TORQUE WRENCH (60-1,200 IN-LB; 6.8-135.6 N·M) SNAP ON | 2 | |
| EMB 00053-001 | WRENCH, RECONNECT,AILERON/ELE CONTROLS | 12 | |
| EMB-00053-001 | WRENCH - RECONNECT, AILERON/ELEVATOR CONTROLS | 12 | |
| EMB00053-001 | WRENCH, RECONNECT, AILERON/ ELE CONTROLS | 12 | |
| F71228-500 | FLIGHT CONTROL WRENCH | 11 | |
| F71435 | WRENCH KIT -0 JT3D ENGINE CONTROL USED TO REMOVE | 1 | |
| F72797 | Wrench - Control Column Splined | 1 | |
| F72799 | WRENCH -0 AILERON POWER CONTROL LINKAGE USED | 1 | |
| F80197-5 | Wrench Set - Limit Switch, Flap Control Unit | 25 | |
| F80197-6 | WRENCH-LIMIT SWITCH ,FLAP CONTROL UNIT | 3 | |
| F80197-7 | WRENCH-LIMIT SWITCH ,FLAP CONTROL UNIT | 3 | |
| F80204-1 | Wrench Set -Transfer Valve. Yaw Damper. Rudder Power Control Unit | 5 | |
| G670-271001-1 | CONTROL COLUMN FLANK DRIVE WRENCH | 1 | |
| G670271001−1 | Flank Drive Wrench − Control Column | 1 | |
| J22002-1 | Spline Wrench - Gearbox, Autothrottle Control Stand | 3 | |
| J27033-1 | Lock - Power Control Unit, Outboard Aileron (*Safety*) (Requires Customer Furnished 5/32" Allen Wrench To Open Bypass) | 11 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL STAND SHAFT ASSEMBLY | 6 | |
| J76002-2 | WRENCH -0 THRUST LEVER CONTROL | 1 | |
| MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM AND CENTERING MECHANISM, LATERAL CONTROL | 2 | |
| MIT65B80549 | ADAPTER - TORQUE WRENCH, OUTBOARD ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| MIT65B80550 | ADAPTER - TORQUE WRENCH, INBOARD ELEVATOR, POWER CONTROL UNIT | 6 | |
| OU144765 | WRENCH- AILERON SERVOCONTROL ADJUSTMENT | 13 | |
| OU144768 | HOLDING WRENCH-AILERON SERVOCONTROL ADJUSTMENT | 11 | |
| PWA45246 | FUEL CONTROL WRENCH | 7 | |
| PWA75737 | WRENCH-GEARBOX ELECTRONIC ENGINE CONTROL | 1 | |
| RB T101709 | Main Rotor Controls Wrench Set | 1 | |
| RB23055346 | Fuel Control Governor Wrench | 2 | |
| RB6798292-B | Hinged Wrench With 5/16 Box End Fuel Control Removal | 2 | |
| RBE332A93-3694-00 | Tail Rotor Head Wrench Side Servo-Control | 1 | |
| RBE332A93-3694-20 | "TRH" WRENCH SIDE SERVO-CONTROL | 2 | |
| RBT18718 | Fuel Control Wrench | 1 | |
| RBW109-3101- 75-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| RBW109-3101-75-10 | WRENCH, FLIGHT CONTROLS SERVO ACTUATOR JOINT REMOV | 1 | |
| RBW109-3101-75-101 | Wrench, Flight Controls Servo Actuator Joint Removal/Installation | 2 | |
| RBW895-3101- 05-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| RBW895-3101-05-101 | Wrench Set, Flight Control Servo-Actuator Clutch Adjustment | 2 | |
| RRT112901 | INTERCHANGEABLE TOOL OF THE NUT WRENCH TYPE FOR DYNAMOMETRIC HAND TOOL SUITABLE FOR THE CONTROL OF THE APPLIED TORQUE | 1 | |
| RRT112901-1 | INTERCHANGEABLE TOOL OF THE NUT WRENCH TYPE FOR DYNAMOMETRIC HAND TOOL SUITABLE FOR THE CONTROL OF THE APPLIED TORQUE | 1 | |
| SC-4409-25 | WRENCH; AILERON POWER CONTROL LINKAGE USED WITH | 1 | |
| SC-4409-26 | WRENCH -0 AILERON POWER CONTROL LINKAGE USED | 1 | |
| SD12575-1 | WRENCH, CONTROL COLUMN | 1 | |
| SPL-9998 | WRENCH FOR FUEL CONTROL GOVERNOR | 1 | |
| ST2580-176-1 | ENGINE CONTROL DRUM MISC. WRENCH | 1 | |
| ST2580-185 | ENGINE CONTROL DRUM WRENCH | 5 | |
| T101709 | MAIN ROTOR CONTROLS WRENCH SET | 1 | |
| T27300 | WRENCH FUEL CONTROL ACTUATOR | 2 | |
| T27302 | WRENCH, OFFSET BOX END, FUEL CONTROL | 4 | |
| T9-1760K-1 | WRENCH - CENTER NUT, CONTROL WHEEL ASSEMBLY | 1 | |
| TOOL132 | McFarlane TOOL132 Anodized Blue 12 thru 1 Push-Pull Control Wrench Set | 1 | |
| TOOL132-11-12 | McFarlane TOOL132-1112 Anodized Blue 1116 and 34 Push-Pull Control Wrench | 1 | |
| TOOL132-14-16 | McFarlane TOOL132-1416 Anodized Blue 78 and 1 Push-Pull Control Wrench | 1 | |
| TOOL132-8-9 | McFarlane TOOL132-89 Anodized Blue 12 and 916 Push-Pull Control Wrench | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
