| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98F27508002000 | WRENCH BEARING | 5 | |
| A32095-1 | WRENCH BEARING | 12 | |
| DAPT60-0115-00 | WRENCH BEARING | 10 | |
| DAPT60-0188-00 | WRENCH BEARING | 8 | |
| F71290-10 | WRENCH BEARING | 4 | |
| PWA45030 | WRENCH BEARING | 1 | |
| PWA46170 | WRENCH BEARING | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F71290-1 | Wrench - Spanner, Bearing Retainer Nut | 12 | |
| F71290-7 | Wrench - Spanner, Bearing Retainer Nut | 11 | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | 1 | |
| (CALIB) 6796529 | WRENCH-SPANNER, TURBINE REAR BEARING CAMP NUT (CALIBRATION) | 1 | |
| 00061-2305-0001 | WRENCH - BEARING LOCKNUT | 1 | |
| 00061-2305-0001PM | WRENCH - BEARING LOCKNUT | 1 | |
| 04Y0009-001 | BEARING TORQUE WRENCH | 1 | |
| 0U141318 | SPECIAL WRENCH BALL BEARING | 1 | |
| 109-3101-22-1 | M/R HUB RING NUT BEARING NUT BOLT WRENCH | 1 | |
| 11C4583 | ADAPTER WRENCH NO 2 BEARING MID NUT | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 140069 | WRENCH, ANTI-FLAIL BEARING NUT, NGB | 1 | |
| 1106467 | BEARING NUT SPANNER WRENCH | 1 | |
| 1C6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856 REV NC | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856G01 | Wrench, Spanner Nut, No.6 Bearing | 1 | |
| 1C6897G02 | Wrench, Spanner Retaining Nut No.5 Bearing | 1 | |
| 21C1351G001 | #3 BEARING LOCKNUT WRENCH -SPANNER | 1 | |
| 21C1352G001 | #4 BEARING LOCKNUT WRENCH-SPANNER | 1 | |
| 21C1361G001 | #1 BEARING LOCKNUT WRENCH-SPANNER | 1 | |
| 21C1736G01 | #4 BEARING WRENCH | 1 | |
| 21C7008G01 | NO 3 BEARING LOCKNUT SPANNER WRENCH | 1 | |
| 23053554 | Wrench – Power Turbine Aft Bearing And Seal Nut | 1 | |
| 23053591 | Wrench & Holder - Spanner, Front Bearing Retaining Nut | 1 | |
| 23053592 | Wrench & Holder – Compressor Aft Bearing Retaining Nut | 1 | |
| 23054806 | Wrench & Holder – Fan Shaft Bearing Retaining Nut | 3 | |
| 23058410 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 290-1 | Wrench - Bearing Retainer Nut Spanner | 1 | |
| 290-10 | Wrench - Bearing Retainer Nut Spanner | 1 | |
| 290-2 | Wrench - Bearing Retainer Nut Spanner | 1 | |
| 290-7 | Wrench - Bearing Retainer Nut Spanner | 1 | |
| 2C14007G02 | RETAINER NUT WRENCH-NO.6 BEARING. | 1 | |
| 2C14064G03TK | WRENCH, SPANNER NUT NO.4B AND NO.4R BEARING HOUSING | 1 | |
| 2C14637G01 | WRENCH, SPANNER NUT ‐ NO. 2 BEARING INNER RACE | 1 | |
| 2C14637G01TK | WRENCH, SPANNER NO.2 BEARING NUT, SEAL, GEAR | 1 | |
| 2C14647G01 | WRENCH, RETAINER NUT ‐ NO. 6 BEARING OUTER RACE | 3 | |
| 2C14650 | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14650 REV F | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14650G01 | WRENCH, RETAINER NUT-INNER RACE NO 6 BEARING | 4 | |
| 2C14650G02 | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14664 | WRENCH SET, RETAINER NUT NO 5R INNER BEARING RACE | 1 | |
| 2C14664 REV D | WRENCH SET, RETAINER NUT NO 5R INNER BEARING RACE | 1 | |
| 2C14664G01 | WRENCH SET, NO. 5R BEARING INNER RACE NUT | 4 | |
| 2C14664G02 | WRENCH SET, RETAINER NUT - NO. 5 INNER BEARING RACE | 1 | |
| 2C14670G01 | WRENCH - 4R BEARING | 3 | |
| 2C14670G02 | WRENCH, 4R BEARING INNER RACE RETAINER NUT | 1 | |
| 2C14670G04 | WRENCH, 4R BEARING INNER RACE RETAINER NUT | 1 | |
| 2C14671G02 | WRENCH ‐ SPANNER NUT NO. 4B BEARING | 2 | |
| 2C14674 | WRENCH, BUMPER BEARING RETAINER | 1 | |
| 2C14674G02 | WRENCH, BUMPER BEARING RETAINER | 2 | |
| 2C5192G01 | WRENCH, Nº 2 BEARING LOCKNUT SPANNER | 1 | |
| 2C5193G01 | WRENCH - #3 BEARING NUT | 1 | |
| 2C5194G01 | WRENCH - #4 BEARING NUT | 1 | |
| 2C5195G01 | WRENCH - #5 BEARING NUT | 1 | |
| 2C5196G01 | WRENCH - #6 BEARING NUT | 1 | |
| 2C5197G01 | WRENCH - #7 BEARING NUT | 1 | |
| 2C5242G01 | WRENCH #1 - BEARING LOCK NUT | 1 | |
| 2C5242G02 | WRENCH, NO. 1 BEARING LOCKNUT SPANNER | 1 | |
| 2C5638G01 | WRENCH - #3 BEARING NUT | 1 | |
| 2C6001 | WRENCH - SPANNER NUT - NO 3 BEARING RACE | 1 | |
| 2C6001G01 | WRENCH, NO. 3R BEARING RACE SPANNER NUT | 1 | |
| 2C6027 | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027 REV A | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6050 | WRENCH, NO. 4 BEARING-SPLIT | 1 | |
| 2C6050G01 | WRENCH, NO. 4 BEARING-SPLIT | 1 | |
| 2C6084G03 | WRENCH, SPANNER NUT, NO. 5 BEARING | 1 | |
| 2C6084G04 | CF6-50 - WRENCH, SPANNER - RETAINER NUT, NO.5 BEARING INNER RACE | 1 | |
| 2C6084P29 | NO.5 BEARING SPANNER NUT WRENCH (LONG) BRAND (GE) | 1 | |
| 2C6128G01TK | WRENCH, SPANNER NUT, NO.2 BEARING | 1 | |
| 2C6265G02 | WRENCH,SPANNER NUT #1 BEARING | 3 | |
| 2C6805G01 | WRENCH, SPANNER NUT-NO.3 BEARING | 1 | |
| 2C6805G02 | WRENCH, SPANNER-NUT # 3 BEARING | 2 | |
| 2C81050G01 | WRENCH, NO. 5 BEARING LOCKNUT | 3 | |
| 2C91125 | #5 BEARING LOCKNUT WRENCH | 1 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 3464-4 | WRENCH, COMPRESSOR EXTENSION SHAFT AND COMPRESSOR FRONT BEARING NUT SHAFT | 2 | |
| 350A93-3552-20 | BEARING BUSH WRENCH | 1 | |
| 369A9825 | PITCH BEARING WRENCH | 1 | |
| 371147-2 | LOCATOR PLATE BEARING WRENCH | 1 | |
| 3855 | WRENCH, COMPRESSOR REAR BEARING NUT | 3 | |
| 3G6205G26551 | WRENCH, M/R LOWER SCISSOR BEARING LOCKNUT REM/INSTL (GJ-63-00) | 1 | |
| 3G6205G26631 | WRENCH (M/R LOWER SCISSOR BEARING) | 1 | |
| 427-240-107-101 | WRENCH OUTER RACE DUPLEX BEARING TR DRIVE | 1 | |
| 611000GSE190 | WRENCH-SPANNER, BEARING | 1 | |
| 83221 | SPANNER WRENCH, OUTER BEARING | 1 | |
| 714154 | WRENCH FOR ASSEMBLY BEARING | 1 | |
| 726847 | REAR BEARING TIGHTENING WRENCH | 1 | |
| 727198 | REAR BEARING TIGHTENING WRENCH | 1 | |
| 730826 | SPANNER WRENCH, INNER BEARING | 1 | |
| 730827 | SPANNER WRENCH, CENTER BEARING | 1 | |
| 6795586 | WRENCH, COMPRESSOR REAR BEARING | 2 | |
| 6795637 | WRENCH INSTALLATION AND REMOVAL GAS PRODUCER TURBINE REAR BEARING RETAINING NUT | 2 | |
| 6795644 | BEARING NUT WRENCH | 2 | |
| 6795985 | WRENCH POWER TURBINE SHAFT BALL BEARING RETAINING NUT | 2 | |
| 6796262 | SUPPORT, COMPRESSOR REAR BEARING NUT WRENCH | 2 | |
| 6796529 | Wrench-Spanner, Turbine Rear Bearing Camp Nut | 3 | |
| 6796592 | Bearing Retaining Nut Spanner Wrench | 2 | |
| 6796637 | Wrench – Pinion Gear Rear Bearing Retaining Nut | 1 | |
| 6796645 | WRENCH-SPLINE, NO. 60 PROP SHAFT THRUST BEARING | 1 | |
| 6796652 | WRENCH AND HOLDER - TURBINE FRONT BEARING RETAINER NUT | 2 | |
| 6797005 | WRENCH- TURBINE REAR BEARING CLAMP NUT | 1 | |
| 6798046 | WRENCH-BEARING LOCKNUT, GAS PRODUCER | 2 | |
| 6799875 | WRENCH -SPANNER, REAR CARRIER BEARING RETAINER | 2 | |
| 6889892 | WRENCH - COMPRESSOR REAR BEARINGCLAMP | 1 | |
| 6889893 | WRENCH-POWER TURBINE SHAFT BALL BEARING RETAINING NUT | 2 | |
| 6893549 | BEARING NUT SPANNER WRENCH | 2 | |
| 6893734 | COMPRESSOR REAR BEARING WRENCH | 2 | |
| 703A93-0010-00 | WRENCH BEARING NUT | 1 | |
| 72-0254 | WRENCH - NIPPLE LINE, NO. 5 BEARING 0 (72-0254 AND PRE CFMI SB 72-0676)) | 1 | |
| 7ME65-73761-1 | Wrench Trunnion Bearing MLG | 17 | |
| 80T2341 | WRENCH, TR DOOR BEARING | 1 | |
| 856A 3269G03 | WRENCH NO.5 BEARING INNER RACE NUT | 9 | |
| 856A1000 | WRENCH INSTALLATION AND REMOVAL NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G09 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 6 | |
| 856A1000G08 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 4 | |
| 856A1000G09 | Wrench, Installation and Removal - No. 3 Bearing Locking Nut (wrench) | 6 | |
| 856A1042 | WRENCH, TORQUE - NO. 4 BEARING RETAINER (TORQUE WRENCH) | 3 | |
| 856A1042 G07 | Wrench Torque ‐ No. 4 Bearing Retainer | 1 | |
| 856A1042 G08 | Wrench Torque ‐ No. 4 Bearing Retainer | 10 | |
| 856A1042G08 | WRENCH TORQUE ‐ NO. 4 BEARING RETAINER | 10 | |
| 856A1045 G01 | Wrench No. 3 Bearing ‐ Retainer Bolt | 6 | |
| 856A1045G01 | WRENCH NO.3 BEARING- RETAIN | 6 | |
| 856A1046 G01 | Wrench No. 3 Bearing ‐ Rotating Seal | 1 | |
| 856A1046G03 | WRENCH NO. 3 BEARING ‐ ROTATING SEAL | 3 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1136 | ADAPTOR, NO 4. BEARING COUNTERTORQUE WRENCH TO COMBUSTION CASE | 1 | |
| 856A1136G02 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 5 | |
| 856A1865G04 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT | 5 | |
| 856A2763 | WRENCH, ROLLER BEARING OUTER RACE NUTS - TGB (WRENCH) | 1 | |
| 856A2763G01 | Wrench Roller Bearing | 2 | |
| 856A2911G01 | WRENCH, NO. 2 BEARING INNER | 7 | |
| 856A3269 | WRENCH # 5 BEARING | 1 | |
| 856A3269 G01 | Wrench ‐ No. 5 Bearing Inner Race | 1 | |
| 856A3269G01 | WRENCH-NO.5 BEARING INNER | 1 | |
| 856A3269G03 | Wrench - No. 5 Bearing Inner Race (wrench) | 9 | |
| 856A3491G03 | WRENCH, COUNTERTORQUE NO. 5 BEARING SUPPORT NIPPLE | 3 | |
| 856A3491G04 | WRENCH, COUNTERTORQUE NO. 5 BEARING SUPPORT NIPPLE | 1 | |
| 856A3492 | WRENCH-COUNTERTORQUE NO 5 BEARING NIPPLE LINE | 1 | |
| 856A3492G03 | WRENCH-COUNTERTORQUE NO 5 BEARING NIPPLE LINE | 6 | |
| 856A3492G04 | WRENCH, COUNTER - NBR 5 BEARING | 7 | |
| 856A3492G05 | WRENCH-COUNTERTORQUE NO 5 BEARING NIPPLE LINE | 7 | |
| 856A3492G06 | Counter Wrench No5 Bearing support | 8 | |
| 856A3570 | WRENCH, NO. 2 BEARING INNER | 1 | |
| 856A3570 G01 | Wrench No. 2 Bearing Inner Race Seal Retainer | 9 | |
| 856A3570G01 | WRENCH, NO. 2 BEARING INNER RACE SEAL RETAINER (WRENCH) | 9 | |
| 856A3572 | WRENCH, NO. 1 BEARING | 1 | |
| 856A3572 G01 | Wrench No. 1 Bearing Inner Race Nut | 11 | |
| 856A3572G01 | NO. 1 BEARING INNER RACE NUT WRENCH | 11 | |
| 856A3798G01 | WRENCH, NO. 1 BEARING INNER RACE NUT | 4 | |
| 8813152000 | WRENCH FOR THE REAR BEARING TUBES | 2 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 956A6806 | WRENCH FOR NUT BEARING 2 INNER RACE | 1 | |
| 956A6809 | WRENCH FOR THE SEAL ROTATING BEARING 1 | 1 | |
| 956A7627 | TORQUE WRENCH - NO.5 BEARING NUT | 1 | |
| 956A8447 | WRENCH - SUPPORT BEARING 5 | 1 | |
| 98A27207507011 | WRENCH, BEARING | 1 | |
| 98A27408011000 | ELEVATOR BEARING SOCKET WRENCH | 2 | |
| 98A27408018 | SOCKET WRENCH SET - ELEVATOR BEARINGS | 1 | |
| 98A27408018000 | SOCKET WRENCH SET - ELEVATOR BEARINGS | 5 | |
| 98A27408018000 | SOCKET WRENCH SET-ELEVATOR BEARINGS | 5 | |
| 98A27409001000 | SOCKET WRENCH SET, ELEVATOR BEARINGS | 1 | |
| 98A27508048000 | SOCKET WRENCH - HINGE BEARING NUT | 1 | |
| 98D27507541000 | WRENCH - BEARING, FLAP TO CARRIAGE TRACK 2 | 10 | |
| 98D55109009000 | WRENCH-GROOVE NUT HINGE BEARING | 11 | |
| 98D57004027000 | WRENCH -REAR PYLON BEARING | 13 | |
| 98D57508627000 | WRENCH - BEARING, TRACK 2-4 | 1 | |
| 98F27508002000 | TEUNION BEARING WRENCH | 5 | |
| 98L55109008000 | WRENCH-GROOVE NUT, THS SUPPORT BEARING | 1 | |
| 98V55109009000 | WRENCH, THSA ARM BEARING NUT | 3 | |
| 9C1512 | WRENCH NO.2 BEARING NUT | 1 | |
| 9C2330 | WRENCH, I/R - NO 1 BEARING NUT | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| A13729 | TOOL - SPHERICAL BEARING INSTALLATION WRENCH SET | 1 | |
| A27114-13 | SPANNER WRENCH, BEARING | 1 | |
| A27122-1 | WRENCH EQUIPMENT - BEARING RETAINING NUT, INBOARD FLAP LINKAGE | 4 | |
| A27122-1-M | WRENCH EQPT -0 BEARING | 1 | |
| A310-27-00-00-0284 | SOCKET WRENCH-FWD BEARING, FLAP TRACK 2 | 1 | |
| A32045-12 | B767 AFT TRUNN/BEARING WRENCH TOOL | 11 | |
| A32045-34 | B767 FWD TRUNN/BEARING WRENCH TOOL | 11 | |
| A32045-48 | WRENCH - SPANNER, OUTBOARD NUT - BEARING RETAINER PIVOT FITTING | 6 | |
| A32095-1 | WRENCH - BEARING RETAINING BOLT, MAIN LANDING GEAR (MLG) | 12 | |
| A32095-2 | WRENCH - BEARING RETAINING BOLT - MLG | 1 | |
| AGE14727 | WRENCH-RAT HUB BEARING INSTALLATION/RE | 3 | |
| BEARING 4.5 NUT TIGHT WRENCH | BEARING 4.5 NUT TIGHT WRENCH | 1 | |
| C27039-1 | Spanner Wrench - Hinge Bearing, Horizontal Stabilizer | 11 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32015-18 | WRENCH - TRUNNION SPHERICAL BEARING, MLG | 10 | |
| C32015-34 | WRENCH - TRUNNION SPHERICAL BEARING, MLG | 5 | |
| C32023 | Wrench - Trunnion Spherical Bearing, MLG | 1 | |
| C32023-1 | Wrench - Trunnion Spherical Bearing, Main Landing Gear | 10 | |
| C32023-12 | Wrench - Trunnion Spherical Bearing, Main Landing Gear | 11 | |
| C32023-12 | WRENCH - TRUNNION SPHERICAL BEARING, MLG | 11 | |
| C32023-14 | WRENCH, TRUNION BEARING | 1 | |
| C32023-2 | Wrench Trunion Spherical Bearing | 1 | |
| C54015-1 | BEARING R/I WRENCH | 16 | |
| CLE23441 | WRENCH FOR BEARINGS | 1 | |
| CT780034-501 | Assy Wrench, Blocker Door Bearing | 1 | |
| CX1416 | BEARING REMOVAL WRENCH - BOX, FUEL PUMP FLANGE NUT | 5 | |
| DAPT60-0115-00 | WRENCH/SPANNER BEARING | 10 | |
| DAPT60-0115-00-IAS | WRENCH - BEARING | 1 | |
| DAPT60-0115-00IAS | WRENCH/SPANNER BEARING | 1 | |
| DAPT60-0188-00 | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 8 | |
| DAPT60-0188-00-IAS | WRENCH-BEARING, PRESSURE CHAMBER | 1 | |
| DAPT60-0188-00IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60-188-00 | BEARING WRENCH | 1 | |
| DAPT60−0115−00 | WRENCH − BEARING | 10 | |
| DAPT60−0188−00 | BEARING WRENCH | 8 | |
| DAPT70-0115-00 | PROP BEARING WRENCH | 1 | |
| DZZ7211-1 | WRENCH BEARING NUT H | 1 | |
| F70085 | Wrench - Spanner, Bearing Retainer Nut | 22 | |
| F70087 | WRENCH SPANNER -0 BEARING RETAINING NUT USED TO | 1 | |
| F71289 | BEARING RETAINER NUT SPANNER WRENCH | 1 | |
| F71290-1 | Wrench - Spanner, Bearing Retainer Nut | 12 | |
| F71290-1, -7 | WRENCH - SPANNER, BEARING RETAINER NUT | 1 | |
| F71290-10 | Wrench - Spanner, Bearing Retainer Nut | 4 | |
| F71290-2 | Wrench - Spanner, Bearing Retainer Nut | 3 | |
| F71290-7 | Wrench - Spanner, Bearing Retainer Nut | 11 | |
| F71290-7C | WRENCH-SPANNER,BEARING RETAINER NUT | 1 | |
| F71313 | SOCKET WRENCH ROD END BEARING | 2 | |
| F71313-10 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-11 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-12 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-13 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-14 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-15 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-16 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-17 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-18 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-19 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-20 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-21 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-22 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-23 | Wrench - Socket, Rod End Bearing | 1 | |
| F71313-24 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-25 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-3 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-31 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-32 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-33 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-34 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-35 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-36 | Wrench - Socket, Rod End Bearing | 5 | |
| F71313-37 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-38 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-39 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-40 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-41 | Wrench - Socket, Rod End Bearing | 4 | |
| F71313-42 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-43 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-44 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-45 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-46 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-47 | Wrench - Socket, Rod End Bearing | 5 | |
| F71313-48 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-49 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-50 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-51 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-52 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-52-5 | ROD END BEARING SOCKET WRENCH | 1 | |
| F71313-55 | WRENCH - SOCKET, ROD END BEARING | 4 | |
| F71313-6 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-7 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-8 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-9 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-XX | Wrench -Socket. Rod End Bearing | 1 | |
| F7131333 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F72799-1 | Wrench-nut，bearing aileron power | 1 | |
| F72799-2 | Wrench-nut，bearing aileron power | 1 | |
| F72925 | WRENCH-SET -0 BEARING NUT FIN STAB.HINGE USED TO | 1 | |
| F72925-1 | Wrench set-bearing nut，fin stabilizer hinge | 2 | |
| F72925-2 | Wrench set-bearing nut，fin stabilizer hinge | 2 | |
| F80018-1 | Spanner Wrench MLG Trunnion Bearing Nut | 17 | |
| F80018-1 | SPANNER WRENCH – MLG TRUNNION BEARING NUT | 17 | |
| F80018-2 | Spanner Wrench - MLG Trunnion Bearing Nut | 11 | |
| F80018-3 | SPANNER WRENCH - FWD TRUNNION BEARING NUT, | 1 | |
| F80020-5 | ADAPTER WRENCH – MLG TRUNNION BEARING NUT | 16 | |
| F80176-1 | TORQUE WRENCH ADAPTER MLG TRUNNION AFT BEARING NUTX | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80253-1 | Spanner Wrench -Hinge Bearing. Horizontal Stabilizer | 2 | |
| GS13272-1 | WRENCH, BEARING RET. NUT. | 1 | |
| GS14822-1 | BEARING NUT WRENCH | 1 | |
| GS19741-1 | WRENCH, BEARING NUT | 2 | |
| GS19848-1 | WRENCH, BEARING RETAINING | 1 | |
| GSE56082 | Aft pintle spherical bearing assembly nut wrench | 1 | |
| HS9001 | WRENCH - BEARING RETAINING NUT | 1 | |
| HSP354 | CAM BEARING NUT WRENCH | 1 | |
| IAE1R18003 | NO 4 BEARING WRENCH TOOL | 22 | |
| IPBT4104-10 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-10) | 1 | |
| IPBT4104-14 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-14) | 1 | |
| IPBT4104-6 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-6) | 1 | |
| IPBT4104-7 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14104-7) | 1 | |
| IPBTK4103-5 | BREAKAWAY TORQUE TEST TOOL TO SUIT MS14103-5 BEARING KIT INCLUDES A 1/4" DRIVE TORQUE WRENCH WITH A MEMORY NEEDLE | 1 | |
| J20010-1 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-2 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-3 | WRENCH - SPANNER, BEARING RETAINER NUT | 3 | |
| J20010-4 | Wrench - Spanner, Bearing Retainer Nut | 3 | |
| J20010-5 | WRENCH - SPANNER, BEARING RETAINER NUT | 3 | |
| J20010-6 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-7 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-8 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J22001-2 | BEARING NUT WRENCH | 2 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| K32008-133 | WRENCH, UPPER TRUNNION AFT BEARING ASSY | 3 | |
| K52025 | WRENCH-BEARING RETAINER END CAP,LIFT MECHANISM,LCD | 1 | |
| K52025-1 | WRENCH BEARING RET | 1 | |
| K52025-2 | WRENCH BEARING RET | 1 | |
| K52025-9 | WRENCH - BEARING RETAINER END CAP, LIFT MECHANISM, LARGE CARGO DOOR | 5 | |
| K52028-1 | WRENCH - REMOVAL/INSTALLATION, PULL-IN BEARING RETAINER NUT, PULL-IN MECHANISM | 5 | |
| LTCT14622 | WRENCH BEARING NUT | 1 | |
| LTCT14622-09 | Wrench, Bearing Nut | 1 | |
| MIT141T4890 | MISCELLANEOUS TOOL WRENCH ASSY FLIGHT DECK WINDOW TRACK ROLLER BEARING STUD | 2 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 6 | |
| MT927-005 | WRENCH, ELEC SPHERE BEARING ADJUST | 1 | |
| NP60-0116-00 | BEARING RING NUT WRENCH | 1 | |
| PWA 16040 | WRENCH NO.1 BEARING OUTER RECE | 2 | |
| PWA 17610 | WRENCH NO.4 BEARING SCAVANGE PUMP | 1 | |
| PWA 31029 | WRENCH NO.5 BEARING INNER RACE | 1 | |
| PWA 6601C | WRENCH ACCESSORY DRIVE AND NO.4 BEARING | 1 | |
| PWA 6613 | WRENCH NO4.5 BEARING | 2 | |
| PWA 8096 | WRENCH NO.2 BEARING INNER RACE | 1 | |
| PWA12154 | WRENCH INNER SHAFT BEARING RETAINER NUT | 5 | |
| PWA12156 | WRENCH OUTER SHAFT BEARING RETAINER NUT | 4 | |
| PWA12270 | BEARING 4 1/2 WRENCH | 1 | |
| PWA12332 | WRENCH NUMBER ONE BEARING RETAINING NUT | 1 | |
| PWA4098 | WRENCH NUMBER ONE BEARING RETAINING NUT HYDRAULIC | 1 | |
| PWA45030 | WRENCH NO.2 BEARING-NUT | 1 | |
| PWA46170 | WRENCH NO.4 BEARING | 2 | |
| PWA46171 | WRENCH NO.4 BEARING | 2 | |
| PWA50682 | WRENCH, BEARING NUT | 1 | |
| PWC999245 | TORQUE WRENCH FRONT BEARING NUT | 1 | |
| RB 92700-10340-101 | BEARING SPANNER WRENCH | 2 | |
| RB T101336 | Duplex Bearing Nut Wrench | 2 | |
| RB T101736 | Alternate Quill Duplex Bearing Nut Wrench | 2 | |
| RB T102106 | Bearing Nut Wrench | 1 | |
| RB T103002 | Wrench Assembly, Input Bearing Nut | 1 | |
| RB6795635 | Install/Removal Gas Producer Tail Rotor Bearing Nut Tie Bolt Nut Wrench | 2 | |
| RB6795644 | Bearing Nut Wrench | 1 | |
| RB6795985 | Wrench-Power Turbine Shaft Ball Bearing Ret Nut | 2 | |
| RB6798046 | Wrench-Bearing Locknut, Gas Producer | 2 | |
| RB6798982 | Planetary Gear & Bearing Assembly Wrench & Holder | 1 | |
| RB6893358 | Wrench, Install & Removal Gas Producer Turbine Frt. Bearing Retaining Nut | 2 | |
| RB6893549 | Bearing Nut Spanner Wrench | 2 | |
| RB6893734 | Compressor Rear Bearing Wrench | 2 | |
| RBA9825 | Pitch Bearing Wrench | 2 | |
| RBBP1425-101 | PITCH BEARING WRENCH | 2 | |
| RBT400358 | Wrench, Clutch Bearing Nut | 1 | |
| RBW6510A00436W142D-3T | Wrench, Shurlock, Bearing Support Housing | 1 | |
| SD12552-1 | WRENCH BEARING RETAINER, NOSE WHEEL | 1 | |
| SL90-315-3750 | NOTCHED WRENCHED - R/I BEARING RETAINING NUTS NSA5454 | 18 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | 1 | |
| SPL-12584 | ROD END BEARING SOCKET WRENCH | 1 | |
| SPL-4360 | WRENCH - MAIN LANDING GEAR TRUNNION SPHERICAL BEARING | 1 | |
| ST2580-103 | WRENCH - ROD END BEARING TOOL IS USED TO HOLD | 1 | |
| ST2580-153 | WRENCH PNEUMATIC SYSTEM BALL JOINT OUTER BEARING N | 4 | |
| ST2580-173 | OFFSET/BEARING WRENCH | 4 | |
| ST2580-177 | THRUST REV/HINGE BEARING SOCKET WRENCH | 5 | |
| ST2580-267-XX-X-X | WRENCH - SPANNER ADAPTER FOR BACN10RF BEARING RETAINER NUTS (ST2580-267 DRAWING) | 1 | |
| ST2580-381 | WRENCH-BEARING CAP INST/REMV, NLG DRAG BRACE | 4 | |
| ST2580-381A | Wrench - Bearing Cap Instl/Rmvl NLG Drag Brace | 2 | |
| ST2580-381A-15 | WRENCH, SPANNER, BEARING CAP | 2 | |
| SWE 86072 | WRENCH - SPLINE, NO. 60 PROPELLER SHAFT THRUST BEARING NUT | 1 | |
| T-00895-1 | Bearing Nut Wrench | 1 | |
| T00895 | WRENCH BEARING NUT | 1 | |
| T00895-1 | BEARING NUT WRENCH | 1 | |
| T101336 | DUPLEX BEARING NUT WRENCH | 1 | |
| T101449 | WRENCH, DUPLEX BEARING NUT | 1 | |
| T101456 | MAST LOWER BEARING RACE RETENTION NUT WRENCH | 1 | |
| T101600 | WRENCH, DUPLEX BEARING NUT | 1 | |
| T101736 | ALTERNATE QUILL DUPLEX BEARING NUT WRENCH | 1 | |
| T103178 | MAST BEARING NUT INSTALLATION AND REMOVAL SOCKET WRENCH | 1 | |
| TP6-2239-013 | Rotor Bearing Nut Spanner Wrench | 1 | |
| WAS-33662 | WRENCH - RAT HUB BEARING INSTALLATION/REMOVAL | 1 | |
| f 71313-10 | Socket Wrench Rod Bearing | 2 | |
| f 71313-12 | Socket Wrench Rod Bearing | 2 | |
| f 71313-16 | Socket Wrench Rod Bearing | 2 | |
| f 71313-8 | Socket Wrench Rod Bearing | 3 | |
| f71313-10 | Socket Wrench Rod Bearing | 2 | |
| f71313-12 | Socket Wrench Rod Bearing | 2 | |
| f71313-16 | Socket Wrench Rod Bearing | 2 | |
| f71313-8 | Socket Wrench Rod Bearing | 3 | |
| lC6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 98A27409001000 | SOCKET WRENCH SET,ELEVATOR BEARING,TOOL, | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
