| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C71019-1 | WRENCH AFT | 8 | |
| C71019-7 | WRENCH AFT | 13 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U148708 | WRENCH-INPUT SHAFT | 1 | |
| 100-49291 | Impeller Shaft Spline Wrench | 1 | |
| 100-51127 | IMPELLER SHAFT WRENCH | 1 | |
| 100-51127 | Impeller Shaft Wrench | 1 | |
| 100-51127PM | IMPELLER SHAFT WRENCH | 1 | |
| 101-590052-1 | LATCH POST ADJUSTMENT WRENCH (BEECHCRAFT CORP) | 2 | |
| 101-590052-3 | LATCH POST ADJUSTMENT WRENCH (BEECHCRAFT CORP) | 3 | |
| 10C2060 | WRENCH, CVT AFT LOCKNUT | 1 | |
| 110705-1 | ADAPTER WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGINE | 1 | |
| 196K8009 | WRENCH, FUEL CONTROL SHAFT | 1 | |
| 196K8009 REV NC | WRENCH, FUEL CONTROL SHAFT | 1 | |
| 1C6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | 1 | |
| 1C6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 | |
| 1C8107 | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | 1 | |
| 1C8107 REV B | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | 1 | |
| 206-XMS-OH-03 | GEAR SHAFT WRENCH | 1 | |
| 21C1186P010 | WRENCH TIEBOLT LOCKNUT TO REAR SHAFT | 1 | |
| 21C1350G001 | WRENCH SPANNER SHAFT TIEBOLT POWER TURBINE ROTOR | 1 | |
| 21C8069G02 | WRENCH, AFT DRIVE SHAFT | 1 | |
| 875.19981 | V20 CRAFTSMAN IMPACT WRENCH CRAFTSMAN 3/8" | 1 | |
| 44707 | WRENCH, COMBINATION, 1-1/8IN, CRAFTS | 1 | |
| 413876 | SAFT NI-CAD AIRCRAFT BATTERY UNIVERSAL VENT WRENCH | 3 | |
| 414151 | SAFT 414151 Ni-Cad Battery Wrench M22 for Connector | 2 | |
| 414152 | SAFT 414152 Ni-Cad Battery Wrench M18 for Connector | 2 | |
| 416159 | EXTRACTOR WRENCH, SAFT BATTERY CELL PULLER, M8 OR M10 | 3 | |
| 2895071 | ADAPTOR-TORQUE WRENCH,APU G/SHAFT | 2 | |
| 2896391 | WRENCH-HOLDING,STARTER G/SHAFT ASSY | 2 | |
| 6795597 | Wrench â Spanner, Torque-meter Shaft and Shaft Support Nuts | 4 | |
| 6795985 | WRENCH POWER TURBINE SHAFT BALL BEARING RETAINING NUT | 2 | |
| 6796019 | WRENCH, NUT, ACC. DR. SHAFT BRG. | 2 | |
| 6796075 | WRENCH - DIFFUSER PUMP SHAFT | 1 | |
| 6796264 | WRENCH - TURBINE COUPLING SHAFT ASSEMBLY | 2 | |
| 6796316 | WRENCH - TORQUEMETER INNER SHAFT SPLINE | 1 | |
| 6796593 | WRENCH SPANNER ACC DRIVE SIDE SHAFT | 3 | |
| 6796645 | WRENCH-SPLINE, NO. 60 PROP SHAFT THRUST BEARING | 1 | |
| 6797054 | WRENCH - DIFFUSER PUMP SHAFT GR SPANNER NUT | 1 | |
| 6797174 | WRENCH - TURB COUPLING SHAFT | 1 | |
| 6797368 | WRENCH SPLINE PROPELLER SHAFT 34 | 1 | |
| 6797637 | WRENCH T/M TOSAFTEY COUP MOUNT BOLT | 2 | |
| 6798980 | WRENCH - PROP SHAFT | 1 | |
| 6799615 | PROP SHAFT FLANGE BOLT WRENCH | 3 | |
| 6889893 | WRENCH-POWER TURBINE SHAFT BALL BEARING RETAINING NUT | 2 | |
| 6893387 | WRENCH, SPANNER TORQUEMETER SHAFT NUT | 2 | |
| 8563392 | WRENCH, TORQUE – AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 1 | |
| 23052528 | Wrench – Alternator Shaft Nut, Forward End, PU Access Drive | 2 | |
| 23053534 | Wrench – Nut, Radial Drive Bevel Pinion Gear-shaft, PU Access Drive | 1 | |
| 23053554 | Wrench – Power Turbine Aft Bearing And Seal Nut | 1 | |
| 23053592 | Wrench & Holder – Compressor Aft Bearing Retaining Nut | 1 | |
| 23053661 | Wrench – Muted Bolt, Prop Shaft To Rear Carrier | 1 | |
| 23053690 | Wrench & Holder, LP Turbine Mid Forward Shaft Retaining Nut | 1 | |
| 23053695 | Wrench & Holder, Low Pressure Turbine Forward Shaft, Fan Drive Shaft, Retaining Nut | 2 | |
| 23054806 | Wrench & Holder – Fan Shaft Bearing Retaining Nut | 3 | |
| 23058410 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23068605 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 267X674 | WRENCH, TORQUE;CRAFTSMAN DIGITORK | 1 | |
| 269A9291 | Wrench Adapter Preload Ls Shaft | 2 | |
| 269T9211-003 | Drive Shaft Coupling Adapter Spanner Wrench | 1 | |
| 269T9299 | Wrench, Lower Pulley Shaft | 1 | |
| 289639-1 | WRENCH,HOLDING,SHAFT ASSEMBLY | 2 | |
| 289766-1 | SHAFT HOLDING WRENCH | 1 | |
| 291349-1 | WRENCH GEAR SHAFT HOLDING | 1 | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | 1 | |
| 297643-1/-2 | WRENCH, SHAFT STRETCHING | 1 | |
| 2C14093 | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093 REV J | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093G03 | WRENCH COUPLING NUT - LOW PRESSURE TURBINE MIDSHAFT | 6 | |
| 2C14093P13 | COUPLING NUT WRENCH-LPT MID SHAFT | 1 | |
| 2C6038G02 | WRENCH, FAN SHAFT | 1 | |
| 2C6038G03 | WRENCH, COUPLING NUT - FAN SHAFT & AFT | 1 | |
| 2C6833G05 | WRENCH, COUPLING NUT ‐ FAN MAINTENANCE UNIT/FAN MID SHAFT | 2 | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT LOCKNUT TORQUE (LOCKNUT WRENCH) | 2 | |
| 3402814-1 | ADAPTER, TORQUE WRENCH, AFT FUSELAGE LH SPLICE BOLTS | 1 | |
| 3402814-2 | ADAPTER, TORQUE WRENCH, AFT FUSELAGE RH SPLICE BOLTS | 1 | |
| 3464-4 | WRENCH, COMPRESSOR EXTENSION SHAFT AND COMPRESSOR FRONT BEARING NUT SHAFT | 2 | |
| 350A93-3205-00 | MGB INPUT LOCK WRENCH- SHAFT HOLDING FIXTURE | 2 | |
| 350A93-3305-20 | TAIL REDUCTION INPUT SHAFT NUT WRENCH | 3 | |
| 50-590013 | UPPER AFT WING NUT TORQUEWRENCH ADAPTER | 1 | |
| 50-590078 | LANDING GEAR CLUTCH ADJUSTING WRENCH (BEECHCRAFT CORP) | 1 | |
| 7 ME 65 - 73761-1 | Adafter Wrench | 17 | |
| 79000708-1 | GENERATOR SHAFT NUT WRENCH | 1 | |
| 7ME65-73761-1 | Adafter Wrench | 17 | |
| 856A1172G01 | WRENCH #3 BRG AIR SEAL AFT | 1 | |
| 856A3070 | WRENCH RADIAL DRIVE SHAFT NUT | 1 | |
| 856A3070 G01 | Wrench ‐ Radial Drive Shaft Nut | 6 | |
| 856A3070G01 | Wrench - Radial Drive Shaft Nut (wrench) | 6 | |
| 856A3254 | WRENCH LPC AFT BLD RTNR & FWD | 1 | |
| 856A3392 | WRENCH TORQUE AFT ROTAT. AIR-OIL SEPARATOR NUT | 2 | |
| 856A3392 G01 | Wrench Torque ‐ Aft Rotating Air/Oil Separator | 19 | |
| 856A3392 REV C | WRENCH TORQUE AFT ROTAT. AIR-OIL SEPARATOR NUT | 1 | |
| 856A3392G01 | WRENCH TORQUE AFT ROTATING | 19 | |
| 856A3392G02 | TORQUE WRENCH - AFT ROTATING AIR/OIL SEPARATOR NUT | 1 | |
| 856A3582G01 | WRENCH, LPC AFT BLADE RETAINER AND FORWARD ROTATING AIR SEAL | 3 | |
| 856A3604 | WRENCH, HORIZ. DRIVE SHAFT NUT | 2 | |
| 856A3604 P01 | Wrench ‐ Horizontal Drive Shaft Nut | 19 | |
| 856A3604 REV A | WRENCH, HORIZ. DRIVE SHAFT NUT | 1 | |
| 856A3604G01 | WRENCH ‐ HORIZONTAL DRIVE SHAFT NUT | 3 | |
| 856A3604P01 | WRENCH, DRIVE SHAFT NUT | 19 | |
| 956A8684 | WRENCH - REMOVE/INSTALL - TGB SHAFT NUT | 1 | |
| 956A8684G01 | WRENCH, REMOVE/INSTALL - TGB SHAFT NUT | 4 | |
| 98A27508050000 | WRENCH-TURNING JIG,FLAP DRIVE SHAFT | 7 | |
| 98A27808009000 | WRENCH-TURNING JIG,SLAT DRIVE SHAFT | 5 | |
| 98D71203004000 | WRENCH SET- AFT ENGINE MOUNT | 11 | |
| 98D712030040000 | Wrench Set AFT Engine Mount | 1 | |
| 98D71203004202 | ENGINE AFT MOUNT WRENCH | 2 | |
| 98D71203501211 | WRENCH SET - AFT MOUNT | 6 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | 1 | |
| A32045-12 | B767 AFT TRUNN/BEARING WRENCH TOOL | 11 | |
| A32045-54 | WRENCH RUDDER JACKSHAFT BRG-RET NUT | 1 | |
| A32045-90 | WRENCH - SHAFT NUT | 1 | |
| A71034-1 | WRENCH - AFT FLIGHT MOUNT ENGINE BUILD-UP "B" PACKAGE | 2 | |
| A71034-2 | WRENCH - AFT FLIGHT MOUNT ENGINE BUILD-UP "B" PACKAGE | 3 | |
| A71034-3 | WRENCH - AFT FLIGHT MOUNT ENGINE BUILD-UP "B" PACKAGE | 9 | |
| AB71001-ZT6 | WRENCH SET - AFT ENGINE MOUNT | 1 | |
| AFPW38 | AIRCRAFT FUEL PUMP WRENCH | 1 | |
| AGE-00802-001 | WRENCH-ECCENTRIC PIN, EMERGENCY DOORADJUST THE ECCENTRIC SHAFT | 1 | |
| AGE12799 | INPUT SHAFT SPANNER WRENCH | 1 | |
| AGE12972 | ANPUT SHAFT WRENCH | 2 | |
| AGE13585 | WRENCH ASSEMBLY, INPUT SHAFT | 1 | |
| AOFW2 | AIRCRAFT OIL FILTER WRENCH | 1 | |
| AT55738 | WRENCH-NUT,AFT AXLE | 1 | |
| C32013 | TORQUE WRENCH ADAPTER AFT BRG RTNR NUT MLG TRUN | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C622G3001201 | WRENCH SHAFT NUT | 1 | |
| C622G3001201/PHP | WRENCH SHAFT NUT | 1 | |
| C71001 | Wrench - AFT Cone Nut | 8 | |
| C71001-1 | Wrench-AFT Cone Nut | 10 | |
| C71014 | ADAPTER WRENCH INLET AFT CONE | 1 | |
| C71014-1 | ADAPTER, WRENCH AFT CONE BOLT | 18 | |
| C71014-3 | ADAPTOR WRENCH AFT CONEBOLT | 14 | |
| C71019 | WRENCH-AFT CONE BOLT NUT | 1 | |
| C71019-1 | WRENCH AFT BOLT NUT | 8 | |
| C71019-2 | WRENCH AFT COWL | 1 | |
| C71019-7 | ADAPTER WRENCH - AFT | 13 | |
| C71020-94 | AFT MOUNT NUT WRENCH | 2 | |
| C71022-6 | Wrench-CFM56-7 Engine Aft Mount Nut | 17 | |
| C71026-1 | Wrench - Torque CFM56-7 Forward/Aft Engine Mount | 10 | |
| C71026-8 | WRENCH - TORQUE CFM56-7 FORWARD/AFT ENGINE MOUNT | 5 | |
| C71040-1 | AFT MOUNT WRENCH / TORQUE GSE | 5 | |
| C76002-21 | CONTROL SHAFT NUT WRENCH | 1 | |
| C76002-22 | RIGHT CONTROL SHAFT WRENCH | 1 | |
| C76002-6 | RIGHT CONTROL SHAFT WRENCH | 2 | |
| C76002-8 | CONTROL SHAFT NUT WRENCH | 2 | |
| CLE23463 | WRENCH FOR THE SLOTTED NUT OF THE SHAFT | 1 | |
| CMMT81627 | CRAFTSMAN ADJUSTABLE WRENCH 24” | 1 | |
| E-C622G3001201 | WRENCH M/R SHAFT NUT | 1 | |
| F72887-1 | WRENCH - BOX, SAFETY LINK, AFT ENGINE MOUNT | 1 | |
| F72899 | WRENCH ADAPTER -0 MLG MAN EXT SHAFT BRG RETAINER | 1 | |
| F72899-1 | WRENCH EXTEND SHAFT | 1 | |
| F72899-2 | WRENCH EXTEND SHAFT | 1 | |
| F80-0-50871 | SHAFT HOLDING WRENCH | 1 | |
| F80057-1 | ADAPTER WRENCH-AFT CONE | 13 | |
| F80157-1 | Wrench -Aft Airstairs Handrail Hinge Pin | 1 | |
| F80176-1 | TORQUE WRENCH ADAPTER MLG TRUNNION AFT BEARING NUTX | 5 | |
| F80176-8 | AFT TRUNNION TORQUE WRENCH ADAPTOR | 16 | |
| F80176-8 | T-WRENCH ADAP. MLG TRUNNION AFT | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80254 | SPECIFICATION - WRENCH BOX END RATCHET AFT CONE BO | 1 | |
| F80257-1 | WRENCH BOX END AFT CONE B | 9 | |
| F80275-1 | WRENCH, BOX END, RATCHET - AFT CONE BOLT | 1 | |
| G20015-1 | WRENCH - SPANNER, SAFTEY LANYA | 6 | |
| GSE55929 | Aft axle pivot pin retaining nut wrench | 1 | |
| GSE56082 | WRENCH AFT PINTLE | 1 | |
| HCS 2037-24 | WRENCH/AFT COWL | 1 | |
| HCS2037-24 | WRENCH/AFT COWL | 1 | |
| HSP4411 | WRENCH - SERVO PISTON SHAFT | 2 | |
| IAG-230-02 | WRENCH FOR SHAFT ASSY NUT IGB | 1 | |
| IAG-230-03 | WRENCH SHAFT ASSY REAR STUB NUT | 1 | |
| IAG-253-02 | WRENCH FOR CF6-50 HPT BUILDUP TOOL SHAFT | 1 | |
| J212001-4 | SHAFT WRENCH | 1 | |
| J22001-4 | SHAFT WRENCH | 2 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL STAND SHAFT ASSEMBLY | 6 | |
| K32008-133 | WRENCH, UPPER TRUNNION AFT BEARING ASSY | 3 | |
| K52026-1 | WRENCH - HOOK PULL-IN MECHANISM - FORWARD AND AFT CARGO DOOR | 8 | |
| LTCT2147 | WRENCH AND BASE ASSEMBLY(REAR COMPRESSOR SHAFT) | 1 | |
| LTCT5709-01 | Fixture, Holding, Nut and Gear Shaft Wrench | 1 | |
| LTCT7842 | Wrench and Holding Fixture, Nut and Gear Shaft | 1 | |
| MIT-SC4409-25 | LINKAGE SHAFT WRENCH | 1 | |
| NS09IND01030 | OTC 6497 TRANSFER SHAFT WRENCH | 1 | |
| O-44168-3 | SHAFT WRENCH | 1 | |
| OM1018 | SHAFT END LOCKING WRENCH | 1 | |
| OU132326 | Wrench for inner shaft | 1 | |
| PWA 16512 | WRENCH ACCESSORY AND COMPONENT DRIVE SHAFTGEAR | 1 | |
| PWA12154 | WRENCH INNER SHAFT BEARING RETAINER NUT | 5 | |
| PWA12156 | WRENCH OUTER SHAFT BEARING RETAINER NUT | 4 | |
| PWA25025 | WRENCH-TURBINE SHAFT NUT | 1 | |
| PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
| PWA25367 | WRENCH - IMC G/B DR G/SHAFT RLR BRG NUT_[PWA25367] | 2 | |
| PWA25371 | WRENCH - G/B DRIVE G/SHAFT BALL BRG_[PWA25371] | 2 | |
| PWA25375 | WRENCH - IMC G/B DRIVE G/SHAFT_[PWA25375] | 2 | |
| PWA27273 | WRENCH - LPC DRIVE TURBINE SHAFT CAP_[PWA27273] | 2 | |
| PWA29988 | WRENCH-R I TURBINE SHAFT NUT | 1 | |
| PWA32062 | WRENCH-BRG NO.5 NUT-HPT SHAFT | 3 | |
| PWC-34941- | GEARSHAFT WRENCH | 9 | |
| PWC30816 | WRENCH, SPLINED STUB SHAFT | 1 | |
| PWC31540 | Starter/Input Shaft Wrench | 2 | |
| PWC34941 | WRENCH GEARSHAFT | 9 | |
| PWC6405 | WRENCH, GEARSHAFT | 1 | |
| PWC64054 | WRENCH GEARSHAFT | 5 | |
| PWC64054/PHP | WRENCH GEARSHAFT | 1 | |
| PWC65054 | Wrench, Gearshaft | 1 | |
| PWC67699 | Wrench Gearshaft - Pratt & Whitney Canada | 4 | |
| PWC70821 | WRENCH GEARSHAFT | 1 | |
| R-TM4992G001 | ARRIEL 2D POWERSHAFT WRENCH | 1 | |
| RB T101465 | Pillow Block Shaft Nut Wrench | 1 | |
| RB T101502P | WRENCH, GEARSHAFT NUT | 1 | |
| RB T102025 | Drive Shaft Engine To Transmission Wrench Assembly | 1 | |
| RB T103013 | Wrench & Adapter, Collector Shaft | 1 | |
| RB T103138-101 | Internal Spline Wrench Assembly, Driveshaft Assembly | 1 | |
| RB6795985 | Wrench-Power Turbine Shaft Ball Bearing Ret Nut | 2 | |
| RB6798980 | Shaft Spanner Nut Wrench | 2 | |
| RB6893387 | Wrench, Spanner Torquemeter Shaft Nut | 2 | |
| RBEC622G3001-201 | WRENCH SHAFT NUT | 1 | |
| RBT101306 | MAIN DRIVESHAFT "XMAS TREE" WRENCH | 2 | |
| RBT101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 2 | |
| RBT400340 | Gearshaft Retaining Wrench | 1 | |
| RSE1098 | WRENCH SET - AFT ENGINE MOUNT | 20 | |
| RSE1098 REV B | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RSE1098-1 | AFT ENGINE WRENCH TOOL | 11 | |
| RSE1098-1-3-5 | WRENCH SET - AFT ENGINE MOUNT | 1 | |
| RSE1098-3 | AFT ENGINE WRENCH TOOL | 8 | |
| RSE1098-5 | AFT ENGINE WRENCH TOOL | 7 | |
| RSE1113 | WRENCH SET - AFT ENGINE MOUNT | 20 | |
| RSEI098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| SE72-6001 | ADAPTER WRENCH AFT C | 5 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| STI3249 | ADAPTER TORQUE WRENCH INPUT SHAFT, ASSY | 1 | |
| SWE 84394 | WRENCH SHAFT PROPELLER | 1 | |
| SWE 86072 | WRENCH - SPLINE, NO. 60 PROPELLER SHAFT THRUST BEARING NUT | 1 | |
| T101306 | MAIN DRIVESHAFT XMAS TREE WRENCH | 4 | |
| T101502 | WRENCH, GEARSHAFT NUT | 1 | |
| T101513 | WRENCH, TAIL ROTOR OUTPUT SHAFT NUT | 2 | |
| T101588 | MAIN DRIVESHAFT / INPUT ADAPTER WRENCH | 1 | |
| T102136 | Gearshaft Wrench | 1 | |
| TK1817 922-4 | LOWERAFT WING BOLT WRENCH | 1 | |
| TM4992G001 | ENGINE OUTPUT SHAFT MAGNETICALLY SEALED -FIXED WRENCH | 3 | |
| TS 1176-10 | LOWER AFT WING NUT TORQUEWRENCH ADAPTER (FOR INTERNAL/EXTERNAL WRENCHING NUT) | 1 | |
| TS1171-1 | UPPER AFT WING NUT TORQUEWRENCH ADAPTER | 1 | |
| TS1171-2 | LOWER AFT WING NUT TORQUEWRENCH ADAPTER (FOR INTERNAL/EXTERNAL WRENCHING NUT) | 1 | |
| TS1176-11 | TORQUE WRENCH ADAPTER UPR AND LWR AFT ATTACH POINT | 2 | |
| TS1222-4 | WRENCH UPR AND LWR AFT WING BOLT | 2 | |
| TS1222-5 | WRENCH-UPR AND LWR AFT | 2 | |
| TS1222-5/922 | WRENCH-UPR AND LWR AFT | 1 | |
| lC6837 | WRENCH SET, INSTALL & REMOVE LPTR FD SHAFT PLUG | 1 | |
| lC6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
