| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 5120PL0839278 | WRENCH ACTUATOR | 1 | |
| 6MIT65B82591 | WRENCH ACTUATOR | 2 | |
| 98F32201003000 | WRENCH ACTUATOR | 13 | |
| A32035-1 | WRENCH ACTUATOR | 17 | |
| PWA51757 | WRENCH ACTUATOR | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F27108864000 | WRENCH SET R/I AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| 0U145409 | THS ACTUATOR SPECIAL WRENCH | 18 | |
| 109-0135-13-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 1 | |
| 109-3101-75-101 | WRENCH SERVO ACTUATOR BALL JOINT | 2 | |
| 109-3101-75-101 | WRENCH, FLIGHT CONTROLS SERVOACTUATOR JOINT REMOVAL/INSTALLATION GF-79-00 | 2 | |
| 109-3130-75-101 | WRENCH, FLIGHT CONTROLS SERVO-ACTUATOR JOINT REMOVAL / INSTALLATION | 1 | |
| 162404-1 | M/R ACTUATOR PRESSURE SWITCH SPECIAL WRENCH | 1 | |
| 23055808 | Wrench – Actuator Arm | 1 | |
| 23068546 | CVG ACTUATOR WRENCH | 1 | |
| 25Y1571A | WRENCH - FLAP SCREWACTUATOR | 1 | |
| 2MIT65B01503 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 2MIT65B82591 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| 3MIT65B01501 | SPANNER WRENCH - WING LANDING GEAR RETRACT ACTUATOR | 2 | |
| 4MIT65B01500 | SPANNER WRENCH - NOSE LANDING GEAR RETRACT ACTUATOR | 1 | |
| 4MIT65B01503 | SOCKET - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 4MIT65B82585 | SPANNER WRENCH - NOSE LANDING GEAR RETRACT ACTUATOR | 1 | |
| 5120005064060 | WRENCH, ACTUATOR | 1 | |
| 629A010-B | SPECIAL WRENCH FOR HYDRAULIC PIPE JOINT OF RUDDER 1# AND 2# ACTUATORS | 1 | |
| 629A040-B | SPECIAL WRENCH FOR HYDRAULIC PIPE JOINT OF RUDDER NO. 3 ACTUATOR | 1 | |
| 65200-2510144-700 | AVIAC REDUCTION GEAR ACTUATOR WRENCH | 1 | |
| 6MIT65B01500 | CROWFOOT - TORQUE WRENCH, HYDRAULIC ACTUATOR | 2 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 7MIT5-88439 | WRENCH -0 STAB. TRIM ACTUATOR GEAR TO INSTALL OR | 6 | |
| 85618 | NLG ACTUATOR WRENCH 1 1/16" DEWALT | 1 | |
| 856A-3114-G01 | Wrench, VBV Ballscrew Actuator | 14 | |
| 856A1498G01 | Wrench Set I/R BSV & VSV Actuator | 7 | |
| 856A2501 | VBV ACTUATOR WRENCH ADAPTER | 5 | |
| 856A3114 | WRENCH-VBV BALLSCREW ACTUATOR | 4 | |
| 856A3114G01 | Wrench VBV ballscrew actuator | 14 | |
| 856A3114G01 | WRENCH VBV ACT BALLSCREW ACTUATOR | 14 | |
| 865A3114G01 | WRENCH-VBV BALL SCREW ACTUATOR | 1 | |
| 895-3101-05-101 | WRENCH SET MR SERVO ACTUATOR | 1 | |
| 895-3101-05-101 | WRENCH SET, FLIGHT CONTROL SERVOACTUATOR CLUTCH ADJUSTMENT GF-82-00 | 1 | |
| 98A27108027000 | SOCKET WRENCH - ALL SPEED AILERON ACTUATOR BOLT NUTS | 3 | |
| 98A52308010000 | SOCKET WRENCH - UDC DOOR ACTUATOR | 4 | |
| 98AMS172327002 | KRUGER ACTUATOR WRENCH TOOL | 12 | |
| 98AMS172327003 | KRUGER ACTUATOR WRENCH TOOL | 9 | |
| 98AMS17233003 | ACTUATOR BOLT WRENCH | 1 | |
| 98D27409006000 | THS ACTUATOR ATTACHMENTS REM/INST WRENCH | 16 | |
| 98D27409007000 | Wrench, THS Actuator | 15 | |
| 98D32303000000 | NLG ACTUATOR WRENCH SET (2 ITEMS) | 26 | |
| 98D32303000200 | WRENCH NLG R/I ACTUATOR TOOL | 3 | |
| 98D32303000201 | WRENCH NLG R/I ACTUATOR TOOL | 9 | |
| 98F2107520001 | WRENCH-ACTUATOR EMERGENCY DOOR | 1 | |
| 98F27108864000 | WRENCH SET AILERON ACTUATOR | 7 | |
| 98F32201003000 | WRENCH-ACTUATOR NLG | 13 | |
| 98F52107520 | WRENCH EMERGENCY DOOR ACTUATOR | 1 | |
| 98F52107520000 | WRENCH-ACTUATOR,EMERGENCY DOOR | 6 | |
| 98F52107520001 | WRENCH-ACTUATOR,EMERGENCY DOOR | 17 | |
| 98F52107520001-REVC | WRENCH-ACTUATOR,EMERGENCY DOOR | 1 | |
| 9C1700G02 | WRENCH - ADAPTER SPECIAL TOOL FOR VARIBLE STATOR VINE VALVE (VSV) ACTUATOR COMPONENTS REPLACEMENT AND IGV, VSV INSPECTION | 3 | |
| A21999 | WRENCH, FLIGHT CONTROLS SERVOACTUATOR JOINT REMOVAL/INSTALLATION | 1 | |
| A25011-2 | WRENCH - INTEGRATOR OFF-WING ESCAPE SYSTEM GAUGE - ACTUATOR, LATCH OPENING, OFF-WING ESCAPE SYSTEM SPRING SCALE | 5 | |
| A25019-1 | WRENCH - INTEGRATOR OFF-WING ESCAPE SYSTEM GAUGE - ACTUATOR, LATCH OPENING, OFF-WING ESCAPE SYSTEM SPRING SCALE | 6 | |
| A27075-1 | WRENCH - SPOILER ACTUATOR ASSEMBLY ADJUSTMENT | 1 | |
| A27092-139 | ACTUATORS/DEACTUATORS SET - PROXIMITY SENSOR WRENCH - SPEED, 3/8 INCH SQUARE DRIVE | 12 | |
| A300-27-81-00-0246 | SPECIAL WRENCH SET-KRUEGER FLAP ACTUATOR | 1 | |
| A32035 | WRENCH STEERING ACTUATOR NLG | 1 | |
| A32035-1 | WRENCH - STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 17 | |
| A32045-101 | Wrench - Spanner, Nlg Steering Actuator Seal Nut | 9 | |
| A32045-20 | WRENCH LOCK RELEASE ACTUATOR NUT | 1 | |
| A32045-23 | ACTUATOR NUT WRENCH TOOL | 1 | |
| A32045-32 | WRENCH NLG STEERING ACTUATOR NUT | 2 | |
| A32045-37 | WRENCH NLG STEERING ACTUATOR CYL NUT | 3 | |
| A32045-38 | WRENCH WRENCH NLG ACTUATOR LOCKNUT | 4 | |
| A32045-41 | WRENCH NLG STEERING SEAL ACTUATOR NUT | 1 | |
| A32045-62 | WRENCH NLG STEERING SEAL ACTUATOR NUT | 1 | |
| A32045-75 | SPANNER WRENCH - ACTUATOR, SPOILER | 2 | |
| A32053 | SPANNER WRENCH RETAINING NUT STEERING ACTUATOR NLG | 1 | |
| A32053-1 | SPANNER WRENCH - RETAINING NUT, STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 1 | |
| A32065 | RESTRAINING WRENCH MLG RETRACT ACTUATOR SUPPORT PIN | 1 | |
| A32065-1 | RESTRAINING WRENCH - MAIN LANDING GEAR (MLG) RETRACT ACTUATOR SUPPORT PIN | 10 | |
| AT-31859 | WRENCH MLG ACTUATOR GLAND NUT | 5 | |
| AT31859 | WRENCH MLG ACTUATOR GLAND NUT | 5 | |
| AT31859-IAS | WRENCH MLG ACTUATOR GLAND NUT | 1 | |
| B32031-9 | WRENCH ACTUATOR NLG | 3 | |
| B32033-1 | WRENCH EQUIPMENT - ALTERNATE LOCKUP RELEASE, ACTUATOR LOCK RING, MAIN LANDING GEAR (MLG) | 2 | |
| B32034-1 | WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE ACTUATOR, LOCK RING, NOSE LANDING GEAR (NLG) | 1 | |
| B78008 | WRENCH SET THRUST REVERSER ACTUATOR | 1 | |
| B78008-1 | WRENCH SET - THRUST REVERSER ACTUATOR | 2 | |
| B78008-17 | SPANNER WRENCH - NUT, CYLINDER LOCKING ACTUATOR (B78008-17 INCLUDED IN B78008-19) | 6 | |
| B78008-18 | T/R ACTUATOR WRENCH SET | 3 | |
| B78008-19 | Wrench Set - Thrust Reverser Actuator | 12 | |
| B78014-37 | WRENCH SET - THRUST REVERSER ACTUATOR | 8 | |
| C27024-1 | WRENCH ACTUATOR SLAT | 1 | |
| C27033-1 | Wrench - Retaining Nut, Stabilizer Trim Actuator | 7 | |
| C27033-5 | Wrench - Retaining Nut, Stabilizer Trim Actuator | 10 | |
| C27033-6 | Wrench - Retaining Nut, Stabilizer Trim Actuator | 9 | |
| C27041-1 | WRENCH COUPLING SLEEVE FLAP ACTUATOR | 11 | |
| C27061-1 | Adapter - Wrench, Flight Spoiler Actuator Power Control Unit | 6 | |
| C27075-1 | Spanner Wrench - Brake Nut, Stabilizer Trim Actuator | 5 | |
| C27075-9 | SPANNER WRENCH - BRAKE NUT, STABILIZER TRIM ACTUATOR | 3 | |
| C27080 | Wrench Assembly - Stabillizer Trim Actuator | 1 | |
| C27080-1 | Drum Wrench - Stabilizer Trim Actuator | 4 | |
| C32010-1 | WRENCH ACTUATOR MLG | 5 | |
| C49005-1 | Wrench-Igv Actuator Garret Gtcp 36-280 APU | 4 | |
| C7080-1 | WRENCH ASSEMBLY - STABILIZER TRIM ACTUATOR | 1 | |
| F70105 | WRENCH -0 SOCKET, STAB. TRIM ACTUATOR USED WITH | 1 | |
| F70109 | Wrench Assembly - Stabilizer Trim Actuator | 7 | |
| F70109 WSTA | STAB TRIM ACTUATOR WRENCH | 1 | |
| F70159 | WRENCH ASSY- STAB. TRIM ACTUATOR SPRING USED IN | 1 | |
| F70255 | WRENCH ADAPTER -0 HOUSING NUT, ACTUATOR THIS | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70257 | SPANNER WRENCH -0 JAM NUT, ACTUATOR USED TO | 1 | |
| F70312-30 | WRENCH, MLG ACTUATOR NUT CROWSFOOT | 10 | |
| F70312-38 | Wrench - Crowfoot - MLG Linkages and Actuator Torque Nuts | 7 | |
| F70312-51 | Wrench, crowfoot-NLG door actuator | 6 | |
| F71252 | ASSEMBLY - WRENCH, PINION GEAR, STABILIZER TRIM ACTUATOR | 12 | |
| F71267 | Assembly-Wrench, PinionGear, Stabilizer Trim Actuator | 26 | |
| F71290-1 | STABILIZER TRIM ACTUATOR WRENCH | 12 | |
| F71313-23 | F71313-23 - SOCKET WRENCH (FOR ACTUATORS 65-17819-8, -10, -14 | 1 | |
| F71313-24 | F71313-24 - SOCKET WRENCH (FOR ACTUATORS 65-17819-12, -15) | 1 | |
| F71313-25 | F71313-25 - SOCKET WRENCH (FOR ACTUATORS 65-17819-1, -4, -7, -11) | 1 | |
| F71313-32 | F71313-7 - SOCKET WRENCH (FOR ACTUATOR 65-17819-6) | 2 | |
| F71313-49 | F71313-24 - SOCKET WRENCH (FOR ACTUATORS 65-17819-12, -15) | 2 | |
| F71313-50 | F71313-25 - SOCKET WRENCH (FOR ACTUATORS 65-17819-1, -4, -7, -11) | 2 | |
| F71313-7 | F71313-7 - SOCKET WRENCH (FOR ACTUATOR 65-17819-6) | 3 | |
| F72776 | WRENCH -0 NOSE GEAR ACTUATOR ROD END. USED TO | 1 | |
| F72798 | ROD END WRENCH -0 MLG ACTUATOR USED TO INSTALL | 1 | |
| F72902-1 | SPOLIER ACTUATOR WRENCH ASSY | 4 | |
| GS23423-2 | ACTUATOR RETAINING NUT WRENCH | 1 | |
| GS23426-1 | KIT, ACTUATOR RETAINER NUT WRENCH | 3 | |
| GSE55920 | WRENCH -BOGIE TRIM ACTUATOR, BLG | 1 | |
| J27049-1 | Wrench - Coupling Sleeve, L E Actuator | 5 | |
| J27049-2 | Wrench - Coupling Sleeve, L E Actuator | 1 | |
| J27050-1 | Wrench - Coupling Sleeve, Flap Actuator | 6 | |
| J27050-2 | Wrench - Coupling Sleeve, Flap Actuator | 1 | |
| J32059-1 | SPANNER WRENCH AND SOCKET - ROD GLAND NUT AND BOLT, MAIN LANDING GEAR ACTUATORS | 1 | |
| J32059-7 | SPANNER WRENCH AND SOCKET - ROD GLAND NUT AND BOLT, MAIN LANDING GEAR ACTUATORS | 2 | |
| J32086-1 | KIT WRENCH ACTUATOR | 4 | |
| K32034 | WRENCH STEERING ACTUATOR NLG | 1 | |
| M46252 | HOLDING WRENCH ACTUATOR ROD | 1 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| NTMIT65C31565 | Torque Wrench Retaining Nut Stabillizer trim Actuator | 1 | |
| RBW109-3101- 75-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| RBW109-3101-75-10 | WRENCH, FLIGHT CONTROLS SERVO ACTUATOR JOINT REMOV | 1 | |
| RBW109-3101-75-101 | Wrench, Flight Controls Servo Actuator Joint Removal/Installation | 2 | |
| RBW895-3101- 05-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| RBW895-3101-05-101 | Wrench Set, Flight Control Servo-Actuator Clutch Adjustment | 2 | |
| RYS.323059 | WRENCH FOR DOOR ACTUATOR EMB145 | 1 | |
| SPL-13019 | RESTRAINING WRENCH - MAIN LANDING GEAR (MLG) RETRACT ACTUATOR SUPPORT PIN | 1 | |
| SPL-1684 | ASSEMBLY - WRENCH, PINION GEAR, STABILIZER TRIM ACTUATOR | 1 | |
| T-27302 | Wrench â Offset, Box End Torque, Actuator special screw | 4 | |
| T27300 | WRENCH FUEL CONTROL ACTUATOR | 2 | |
| T3524-003 | WRENCH - RAT ACTUATOR SOLENOID | 1 | |
| WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
| С27033-5 | WRENCH - RETAINING NUT, STABILIZER TRIM ACTUATOR | 1 | |
| 98A52308010000 | SOCKET WRENCH,UDC DOOR ACTUATOR | 4 | |
| PWA29351 | WRENCH HAND HPC VARIABLE VANE ACTUATOR | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
