| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32045-92 | WRENCH - SPANNER, | 11 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F71290-1 | Wrench - Spanner, Bearing Retainer Nut | 12 | |
| F71290-7 | Wrench - Spanner, Bearing Retainer Nut | 10 | |
| (CALIB) 6796529 | WRENCH-SPANNER, TURBINE REAR BEARING CAMP NUT (CALIBRATION) | 1 | |
| 11 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 008407 | "WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEAC | 1 | |
| 1C6950 | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 1C6950 REV U | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 23053591 | Wrench & Holder - Spanner, Front Bearing Retaining Nut | 1 | |
| 2C14856G01 | WRENCH SET - SPANNER,AIRTUBE NUTS | 6 | |
| 2C6027 | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027 REV A | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6062G07 | WRENCH, SPANNER, HORIZONTAL - COUPLING NUT | 1 | |
| 2C6062G09 | WRENCH, SPANNER, HORIZONTAL - COUPLING NUT | 1 | |
| 2C6352G06 | WRENCH SET - SPANNER,AIRTUBE NUTS | 4 | |
| 2C6352G07 | WRENCH SET - SPANNER,AIRTUBE NUTS | 4 | |
| 2ME65B00002 | WRENCH - SPANNER, SAFETY LANYARD, TIEDOWN LOCKS | 10 | |
| 2ME65B0002 | WRENCH-SPANNER, SAFETY LANYARD, TIE DCWNLOCKS | 1 | |
| 4MIT65B82585 | WRENCH - SPANNER, NOSE LANDING GEAR RETRACT ACTUATOR | 3 | |
| 5385A12 | WRENCH: SPANNER, ADJUSTABLE 15/16 IN,6 IN LG, CR PLTD TOOLS - HAND / POWER: FORGED STL | 1 | |
| 5385A16 | WRENCH: SPANNER, ADJUSTABLE 1-11/16IN, 15IN LG, CR PLTD | 1 | |
| 611000GSE190 | WRENCH-SPANNER, BEARING | 1 | |
| 733273 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 3 | |
| 6795597 | Wrench â Spanner, Torque-meter Shaft and Shaft Support Nuts | 4 | |
| 6796529 | Wrench-Spanner, Turbine Rear Bearing Camp Nut | 3 | |
| 6796530 | WRENCH - SPANNER, TURBINE TO COMPRESSOR TIE BOLT LOCKNUT | 3 | |
| 6796533 | WRENCH - SPANNER, TURBINE TO COMPRESSOR TIE BOLT | 3 | |
| 6796537 | WRENCH - SPANNER, TURBINE COUPLING CLAMP NUT | 2 | |
| 6798131 | WRENCH - SPANNER, REDUCTION GEAR OIL PUMP PRESSURE ADJUSTING VALVE THREADED BUSHING | 2 | |
| 6799875 | WRENCH -SPANNER, REAR CARRIER BEARING RETAINER | 2 | |
| 6MIT65B04002 | WRENCH - SPANNER, SOCKET (1/2" & 3/4" DRIVE) | 12 | |
| 7430A32 | WRENCH:SPANNER, ADJUSTABLE15/16 IN,6 IN LG,CR PLTD TOOLS - HAND / POWER :FORGED | 1 | |
| 810-2005 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-2007 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-2007-KVS | WRENCH - SPANNER, UNDERWATER LOCATOR BEACON | 9 | |
| 810-2007/KVS | WRENCH - SPANNER, UNDERWATER LOCATOR BEACON | 9 | |
| 810-2007KVS | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACO | 9 | |
| 810-205 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-305 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-325 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 22 | |
| 9809800007 | WRENCH - SPANNER, TWO PIN | 1 | |
| A28010-1 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 4 | |
| A28010-2 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 3 | |
| A28012-1 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 11 | |
| A28012-2 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 8 | |
| A28015-1 | WRENCH - SPANNER, FUEL RECEPTACLE NUT, OVERWING | 2 | |
| A32045-100 | Wrench - Spanner, Large Cargo Door Pull-In Hook Retainer Nut | 9 | |
| A32045-101 | WRENCH -SPANNER, NLG | 11 | |
| A32045-110 | WRENCH - SPANNER, MLG GLAND NUT | 11 | |
| A32045-12 | WRENCH - SPANNER, MLG AFT TRUNNION BEARING | 12 | |
| A32045-46 | WRENCH - SPANNER, RETAINER MLG TRUCK POSITIONER | 3 | |
| A32045-48 | WRENCH - SPANNER, OUTBOARD NUT - BEARING RETAINER PIVOT FITTING | 7 | |
| A32045-92 | WRENCH - SPANNER, NLG GLAND NUT | 11 | |
| A32045-93 | WRENCH - SPANNER, NL | 9 | |
| A32045-94 | WRENCH-SPANNER,MLG GLAND NUT | 9 | |
| AS32045-92 | WRENCH-SPANNER, NLG GLAND NUT_[AS32045-92] | 1 | |
| B362-04180A | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-09111 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 5 | |
| C27075-9 | WRENCH- SPANNER, RETAINER RING, STAB TRIM ACTUATOR | 3 | |
| C28002-9 | WRENCH-SPANNER, FUEL SUMP DRAIN VALVE | 15 | |
| C32025-7 | WRENCH - SPANNER, GLAND NUT, NOSE LANDING GEAR | 22 | |
| C32040-1 | WRENCH - SPANNER, STEERING COLLAR RETAINER, NOSE LANDING GEAR | 8 | |
| C32040-6 | WRENCH - SPANNER, ST | 22 | |
| COM-1619 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| COM-2543 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| DAPT60-0115-00 | WRENCH-SPANNER, BEARING | 10 | |
| DAPT60-0116-00 | WRENCH-SPANNER, RING NUT | 6 | |
| DAPT60-0400-00 | WRENCH-SPANNER, RING NUT | 7 | |
| F70013 | WRENCH -0 HOOK SPANNER, 3 INCH DIAMETER USED TO | 1 | |
| F70085 | Wrench - Spanner, Bearing Retainer Nut | 23 | |
| F70107 | WRENCH -0 HOOK SPANNER, 9 INCH DIAMETER USED TO | 1 | |
| F70175-1 | Wrench adapter-face spanner，LUG | 1 | |
| F70336 | WRENCH - SPANNER, MAIN ENTRY/GALLEY DOOR ASSIST HANDLE | 1 | |
| F70336-1 | WRENCH - SPANNER, MAIN ENTRY DOOR AS | 22 | |
| F70336-4 | WRENCH - SPANNER, MAIN ENTRY DOOR ASSIST HANDLE WITH COFC | 5 | |
| F71189 | Wrench assembly-spanner，face pin 3.75 span | 1 | |
| F71207 | WRENCH -0 PIN SPANNER, SOCKET FOR INSTALLING AND | 1 | |
| F71228-500 | WRENCH - SPANNER, SPLINED | 11 | |
| F71289 | Wrench-spanner，bearing retainer nut | 1 | |
| F71290-1 | Wrench - Spanner, Bearing Retainer Nut | 12 | |
| F71290-1, -7 | WRENCH - SPANNER, BEARING RETAINER NUT | 1 | |
| F71290-10 | Wrench - Spanner, Bearing Retainer Nut | 3 | |
| F71290-2 | Wrench - Spanner, Bearing Retainer Nut | 2 | |
| F71290-7 | Wrench - Spanner, Bearing Retainer Nut | 10 | |
| F71290-7C | WRENCH-SPANNER,BEARING RETAINER NUT | 1 | |
| F72767 | WRENCH -0 SPANNER, GLAND NUT, MLG USED TO REMOVE | 2 | |
| F72767-3 | Wrench-spanner，gland nut，MLG | 8 | |
| F72959-1 | Wrench spanner, 0,75-2,0 ( 1. of 12) | 9 | |
| F72959-2 | Wrench spanner, 0,75-2,0 ( 2.) | 3 | |
| F72959-4 | WRENCH - SPANNER, NOSE LANDING GEAR TRUNNION PIN RETAINER NUT | 7 | |
| F72959-40 | Wrench-Spanner, Nose Landing Gear Trunnion Pin Retainer Nut | 24 | |
| F72959-5 | Wrench spanner, 1,75-4,0 ( 5.) | 4 | |
| F72959-6 | Wrench spanner, 1,75-4,0 ( 6.) | 3 | |
| F72959-8 | Wrench spanner, 1,75-4,0 ( 8.) | 3 | |
| F80032-1 | WRENCH ADAPTER - FACE SPANNER, LUG | 7 | |
| F80051-1 | Wrench adapter-face spanner，LUG | 1 | |
| F80053-1 | Wrench Assembly - Face Spanner, Lug | 12 | |
| G20015-1 | WRENCH - SPANNER, SAFETY LANYARD, TIE DOWN LOCKS | 6 | |
| G52007 | WRENCH -0 SPANNER, AIRSTAIR DAMPER NUT | 1 | |
| HS7966 | WRENCH-SPANNER, DOME RETAINING NUT | 1 | |
| HS9950 | WRENCH-SPANNER, SERVO NUT | 1 | |
| J20010-1 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-2 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-3 | WRENCH - SPANNER, BEARING RETAINER NUT | 4 | |
| J20010-4 | Wrench - Spanner, Bearing Retainer Nut | 3 | |
| J20010-5 | WRENCH - SPANNER, BEARING RETAINER NUT | 3 | |
| J20010-6 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-7 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-8 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL STAND SHAFT ASSEMBLY | 5 | |
| K28001-1 | Wrench - Spanner, Fuel Sump Drain Valve | 9 | |
| K32028-1 | Wrench - Gland Nut Spanner, MLG | 9 | |
| K32028-2 | Wrench - Gland Nut Spanner, NLG | 12 | |
| MSE-43 | WRENCH - SPANNER, FAN REVERSER, SPL-6630 | 3 | |
| SPL-10484 | WRENCH - SPANNER, C-TYPE - RB211-535 ENGINES | 1 | |
| SPL-1775 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 1 | |
| SPL-2339 | WRENCH - SPANNER, C-TYPE | 1 | |
| SPL-9349 | WRENCH-SPANNER, GLAND NUT | 1 | |
| ST2580-267 | Wrench - Spanner, Adapter For BACN10RF Nuts. (See ST2580-267 Drawing For Correct Dash Number) | 15 | |
| ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-302 | WRENCH - SPANNER, FUEL RECEPTACLE NUT, OVERWING | 12 | |
| ST2580-381 | WRENCH - SPANNER, FACE TYPE | 4 | |
| ST2580-381A | WRENCH - SPANNER, BEARING CAP, NLG DRAG BRACE | 2 | |
| ST2580-418 | Torque wrench-Spanner, Face type | 3 | |
| ST2580-67 | WRENCH - SPANNER, COAXIAL CONNECTORS | 3 | |
| T5-0497K | WRENCH - SPANNER, FUEL MEASURING STICK (KAISER ELECTROPRECISION) | 5 | |
| UT630-2 | WRENCH - SPANNER, C-TYPE (0.625 IN. DIA) | 13 | |
| UT818 | WRENCH - SPANNER, C-TYPE | 12 | |
| UT819 | WRENCH-SPANNER,C-TYPE (10 NOTCHES , 1,520" DIA. 3/8" DRIVE) | 10 | |
| UT841-43 | WRENCH - SPANNER, C TYPE (8 POINT, 3/8 INCH DRIVE, 1.275 INCH) - RB211-535 ENGINES | 1 | |
| UT893 | WRENCH - SPANNER, C-TYPE (C-TYPE, 10 PT, 1/2" DRIVE, 2.025 DIA.) | 2 | |
| UT894 | WRENCH - SPANNER, C-TYPE 10PT, 1/2" DRIVE, 2.275 DIA | 10 | |
| lC6950 | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
