| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 57736 A 0000-01 | WRENCH - SET | 4 | |
| 57736A0000-01 | WRENCH - SET | 4 | |
| RSE1071 | Wrench - Set | 11 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203000000 | WRENCH WRENCH SET,TORQUE-RR(MSN 1,2,4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203000001 | WRENCH WRENCH SET,TORQUE-RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203005000 | WRENCH WRENCH SET,TORQUE-EA (CALIBRATION) (CALIBRATION) | 1 | |
| 046140 | OFFSET WRENCH - SEATLEG ATTACHMENT | 3 | |
| 0EXL707B | SET, WRENCH COMBINATION, LONG 12-PT | 2 | |
| 11005 | WILLIAMS / Snap-On® Industrial Brands 14 Piece Combination Wrench Set | 1 | |
| 11940 | WILLIAMS 7 Piece Flex-Head Combination Wrench Set | 1 | |
| 000961974 | SET OF 9 BALL HEAD OFFSET HEXAGON KEY WRENCHES, 110°, EXTRA-SHORT SIDE MODEL | 1 | |
| 0EXS721 | COMBINATION WRENCH SET 1/4-1 3/8 | 1 | |
| 11G-212-30-70-0050-000 | 5/8" OPEN END OOF-SET WRENCH | 1 | |
| 145T06090-401 | WRENCH SET - INSTL/RMVL, PYLON BSHG | 1 | |
| 167C2782 | TORQUE WRENCH-PRESET | 1 | |
| 16957 | HI-LOK OFFSET BOX WRENCH7/32” X 1/4” | 1 | |
| 16958 | HI-LOK OFFSET BOX WRENCH 1/4" X 9/32" ATBRO2528 | 1 | |
| 16961 | HI-LOK OFFSET BOX WRENCH 5/16” X 11/32” | 1 | |
| 16962 | HI-LOK OFFSET BOX WRENCH 5/16" X 3/8" ATBRO3137 | 1 | |
| 16963 | HI-LOK OFFSET BOX WRENCH 7/16" X 1/2" | 1 | |
| 1C6344 | WRENCH - SET SPANNER | 1 | |
| 1C9774 | WRENCH SET, RETAINER NUT-NO. 5 BRG INNER RACE | 1 | |
| 207SFRH | SET - CROWFOOT WRENCH (SNAP-ON TOOLS CORP.) | 2 | |
| 208AN | SNAP ON SET, WRENCH, CROWFOOT FLARE NUT, 12-POINT (8 PCS.) (5/8" TO 1 1/16") | 2 | |
| 21002 | 9-PIECE,12PT. WILLIAMSCOMBINATION WRENCH SET | 1 | |
| 210G | IGNITION WRENCH 1-SET | 1 | |
| 211FCO | SET - CROWFOOT FLARE WRENCH (SNAP-ON TOOLS CORP.) | 1 | |
| 211FCOA | SET - CROWFOOT FLARE WRENCH | 2 | |
| 214FC | 3/8" DRIVE OPEN-END CROWFOOT WRENCH SET (7/16–1-1/4") | 2 | |
| 216FCOM | 3/8˝ DRIVE METRIC OPEN-END CEOWFOOT WRENCH SET (16 PCS, 9-24MM) | 1 | |
| 226FC | 26 PC 3/8" DRIVE SAE OPEN-END CROWFOOT WRENCH SET (7/16-2") | 2 | |
| 2947022134 | WRENCH SET - TORQUE | 1 | |
| 2C14024G01 | WRENCH SET, RETAINER NUTS-NO4R&5R INNER BRG. RACE | 1 | |
| 2C14165 LMT | WRENCH SET- LP TURBINE ROTOR | 1 | |
| 2C14165G01 | WRENCH SET-LP TURB ROTOR | 3 | |
| 2C14244 | WRENCH SET-MAIN ENGINE CONTROL | 1 | |
| 2C14664G01 | WRENCH SET, RETAINER NUT - NO. 5 INNER BEARING RACE | 4 | |
| 2C14664G02 | WRENCH SET, RETAINER NUT - NO. 5 INNER BEARING RACE | 1 | |
| 2C14664P02 | WRENCH SET, RETAINER NUT - NO. 5 INNER BRG RACE | 1 | |
| 2C14856G01 | WRENCH, WRENCH SET SPANNER-AIR TUBE | 6 | |
| 2C6081 | FUEL - MAIN WRENCH SET | 1 | |
| 2C6081G02 | WRENCH SET-R/I FUEL MANIFOLD TUBES | 1 | |
| 2C6276 | WRENCH SET-FUEL CONTROL PUMP | 1 | |
| 2C6352 | WRENCH SET, SPANNER - AIRTUBE NUTS | 3 | |
| 2C6352 REV W | WRENCH SET, SPANNER - AIR TUBE NUTS | 1 | |
| 2C6352G01 | WRENCH SET, SPANNER-AIRTUBE NUTS | 1 | |
| 2C6352G02 | WRENCH SET, SPANNER-AIRTUBE NUTS | 2 | |
| 2C6352G03 | WRENCH SET, SPANNER-AIRTUBE NUTS | 1 | |
| 2C6352G04 | WRENCH SET, SPANNER-AIRTUBE NUTS | 1 | |
| 2C6352G05 | WRENCH SET, SPANNER-AIRTUBE NUTS | 2 | |
| 2C6352G06 | WRENCH SET, SPANNER-AIRTUBE NUTS | 4 | |
| 2C6352G07 | SET-SPANNER WRENCH-767 | 4 | |
| 2C6352G08 | WRENCH SET, SPANNER - EXTERNAL TUBE | 1 | |
| 2C6352P02 | WRENCH SET-SPANNER AIRTUBE NUT | 1 | |
| 2C6352P04 | WRENCH SET-SPANNER AIRTUBE NUT | 1 | |
| 2C6352P06 | WRENCH SET-SPANNER AIRTUBE NUT | 1 | |
| 2C6352P07 | WRENCH SET-SPANNER AIRTUBE NUT | 1 | |
| 2C6352P08 | WRENCH SET-SPANNER AIRTUBE NUT | 1 | |
| 2C6352P09 | WRENCH SET-SPANNER AIRTUBE NUT | 3 | |
| 2C6352P15 | WRENCH SET-SPANNER AIRTUBE NUT | 1 | |
| 2C6937 | WRENCH SET - COMPRESSOR ROTOR | 1 | |
| 2C6937G01 | WRENCH SET - COMPRESSOR ROTOR | 1 | |
| 2C6937G05 | WRENCH SET - COMPRESSOR ROTOR | 1 | |
| 2C6937G08 | WRENCH SET - COMPRES | 1 | |
| 2C6965P01 | TOOL WRENCH SET TO 70 - 1 INC POU | 1 | |
| 2MIT65B00161-1 | HOLDING WRENCH SET - LANDING GEAR BOLTS | 5 | |
| 2Z/7T | BAHCO 2Z/7T 1/4" - 7/8" DEEP OFFSET DOUBLE RING-END WRENCH SET – 7 PIECES | 1 | |
| 315AN | 15 PC 1/2" DRIVE 12-POINT SAE FLANK DRIVE® DEEP FLARE NUT CROWFOOT WRENCH SET (1-1/8-2") | 4 | |
| 3200D | IGNITION WRENCH 1-SET | 1 | |
| 3MIT65B90100 | WRENCH SET - STRUT INSTALLATION, UPPER LINK, FRONT SPAR | 6 | |
| 3SF56228-501 | WRENCH- SET MEC MOUNTING NUTS | 1 | |
| 44700018 | 12717-PIN WRENCH, OFFSET | 1 | |
| 50010004 | 755/4-No4 MANOSKOP TORQUE WRENCH 4-40Nm. No setting scale, have to be set with testers | 1 | |
| 50010010 | 755/10-No10 MANSKOP TORQUE WRENCH 20-100Nm No setting scale, have to be set with testers | 1 | |
| 50010020 | 755/20-No20 MANSKOP TORQUE WRENCH 40-200Nm No setting scale, have to be set with testers | 1 | |
| 50010030 | 755/30-No30 MANSKOP TORQUE WRENCH 60-300Nm No setting scale, have to be set with testers | 1 | |
| 5120-01-429-108 | 42 PC 3/8" DRIVE SAE OPEN-END CROWFOOT WRENCH SET (7/16-3") | 1 | |
| 5120-01-429-1087 | WRENCH SET (7/16-3") | 1 | |
| 5163A42 | WRENCH:COMBINATION STANDARD SET IN METRIC TOOLS - HAND / POWER :10 PIECE INCH WRENCH SET 1/4" - 3/4" ORDER PN 5163A43 FROM MCMASTER- CARR MANUFACTURER PART NUMBER (M) - 5163A42; MANUFACTURER (MA) - ARMSTRONG; VENDOR/SUPPLIER PART NUMBER (VN) - 5163A42 | 1 | |
| 5163A43 | WRENCH SET - COMBINATION | 1 | |
| 5163A45 | WRENCH SET:COMBINATIONTYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT | 1 | |
| 5434A2 | ANGLE OPEN-END WRENCH 9-PIECE INCH SET | 1 | |
| 55A.JU10 | 55A - INCH OFFSET-RING WRENCH SETS | 2 | |
| 57736 A 0000-01 | WRENCH - SET P/N 57736 A 0000-01 (LIEBHERR) | 4 | |
| 57736-A-0000-01 | GSE 185 WRENCH - SET | 4 | |
| 5916804-1 | Wrench set-slat adjustment | 1 | |
| 5916804-501 | Wrench set-slat adjustment | 7 | |
| 6MIT65B04002 | SOCKET-SPANNER WRENCH (SET) | 12 | |
| 8007SQB | WRENCH-SET,HYD.SHUTOFF VALVE | 1 | |
| 833553-1 | WRENCH SPECIAL TORQ-SET | 1 | |
| 856A1022 | WRENCH SET, SPANNER - AIR TUBE NUTS | 1 | |
| 856A1022G03 | WRENCH SET SPNR-AIRTUBE NUTS | 13 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1469 | WRENCH SET, RUN ON OFF - MEC FUEL PUMP NUTS | 4 | |
| 856A1469G01 | WRENCH SET, RUN ON-OFF, FUEL PUMP NUTS (SM) | 21 | |
| 856A1469G02 | RUNE ON-OFF WRENCH SET | 15 | |
| 856A1469P03 | WRENCH SET, RUN ON/OFF - MEC/FUEL PUMP NUTS OU | 9 | |
| 856A1498G01 | WRENCH ADAPTOR - SET (2 EA) | 7 | |
| 856A1612 | WRENCH SET, SPANNER - AIRTUBE NUTS | 2 | |
| 856A1612G01 | WRENCH SET SPANNER-A | 8 | |
| 856A1616G01 | Wrench Set - Spanner Airtube-Nuts | 1 | |
| 856A2905G02 | TORQUING WRENCH SET - FAN DISK | 6 | |
| 856A3725 | SET, WRENCHES - TORQUE/LOOSEN FAN DISK COUPLING BOLTS | 1 | |
| 856A3725G01 | TOOL SET WRENCHES TORQUE/LOOSEN- FAN DISK COUPLING BOLTS | 2 | |
| 856A3725G02 | Tool Set Wrenches Torque/Loosen- Fan Disk Coupling Bolts | 12 | |
| 856A3725G03 | TOOL SET WRENCHES TORQUE/LOOSEN - FAN DISK COUPLING BOLTS (TOOL SET) | 3 | |
| 88944285 | WRENCH SETJ-HANDLE ALLEN (2-10MM) | 1 | |
| 895-3101-05-101 | WRENCH SET, FLIGHT CONTROLS SERVO-ACTUATORS CLUTCH ADJUSTMENT | 1 | |
| 895-3101-05-101 | WRENCH SET, FLIGHT CONTROL SERVOACTUATOR CLUTCH ADJUSTMENT GF-82-00 | 1 | |
| 904.10.89.136 | TORQUE WRENCH SET 80-400NM | 1 | |
| 9708 | SUNEX TOOLS 3/8-INCH DRIVE FRACTIONAL CROWFOOT FLARE NUT WRENCH SET, 3/8-INCH - 7/8-INCH, FULLY POLISHED, 8-PIECE | 2 | |
| 942319 | COMBINATION IGNITION WRENCH SET, 10-PIECE | 1 | |
| 96090005 | 701/32/1-TORQUE WRENCH SET | 1 | |
| 96401705 | 17F/5 (5PC SET)-FLAT COMBI RATCHET WRENCH SET | 1 | |
| 96401712 | 17F/12 (12PC SET)-FLAT COMBI RATCHET WRENCH SET | 1 | |
| 96401715 | 17F/15 - (15PC SET)-FLAT COMBI RATCHET WRENCH SET | 1 | |
| 96411005 | 240/5-SET OF 5 RATCHET WRENCHES | 1 | |
| 96411006 | 240/6 N-SET RATCHET WRENCHES FASTRATCH | 1 | |
| 96432201 | 10766/6-TORX KEY WRENCH SET 6pc | 1 | |
| 96432603 | 10767H/9 - HEX KEY WRENCH SET C/W BALL IN HOLDER | 1 | |
| 96432701 | L-key wrench set (T9 - T40) | 1 | |
| 96435502 | Hexagon key L-wrenches set | 1 | |
| 96435506 | 10760ACV/8 T-SET HEX KEY WRENCHES 3/32"-3/8" (8pc) | 1 | |
| 96502053 | 730R/40 32 TLG-730R/40 32 TLG T/WRENCH SET | 1 | |
| 96507214 | 721QR/20/3/1 QUICK-TORQUE WRENCH SET WITH CUTOUT | 1 | |
| 96BPA/SC9 | SET OF 9 BALL HEAD OFFSET HEXAGON KEY WRENCHES, 110°, EXTRA-SHORT SIDE MODEL | 1 | |
| 97F57008289000 | WRENCH, SOCKET - SET | 1 | |
| 97F57008289001 | WRENCH-SET SOCKET | 2 | |
| 98A27408018 | SOCKET WRENCH SET - ELEVATOR BEARINGS | 1 | |
| 98A27408018000 | SOCKET WRENCH SET - ELEVATOR BEARINGS | 5 | |
| 98A27408018000 | SOCKET WRENCH SET-ELEVATOR BEARINGS | 5 | |
| 98A27508032000 | SOCKET WRENCH SET -FRICTION BUSH,TRACK REAR ATTACHMENT | 1 | |
| 98A27508038000 | SOCKET WRENCH SET - FLAP TRACK REAR ATTACHMENT | 2 | |
| 98A27508047000 | SOCKET WRENCH SET - TRUNNION NUTS | 4 | |
| 98AMS172327002 | TOOL SET-R I,THS OR WRENCH-ADAPTER - SECONDARY PINS | 12 | |
| 98AMS172333002 | TOOL SET-R I,THS OR ADAPTER-WRENCH - PRIMARY PINS | 13 | |
| 98D27407517000 | WRENCH TOOL SET RI-THS | 21 | |
| 98D32303000000 | WRENCH SET - NLG ACTUATOR | 26 | |
| 98D54503000000 | PYLON REMOVAL- WRENCH SET | 22 | |
| 98D54503000001 | PYLON REMOVAL-WRENCH Set | 6 | |
| 98D71203002002 | TORQUE WRENCH SET-CFM56 ENG CHANGE | 22 | |
| 98D71203002206 | WRENCH - CHEST TORQUE SET | 8 | |
| 98D71203004000 | WRENCH SET- AFT ENGINE MOUNT | 11 | |
| 98D71203013000 | Torque wrench Set- issue A | 9 | |
| 98D71203014000 | Torque wrench Set- issue A | 11 | |
| 98D71203501211 | WRENCH SET - AFT MOUNT | 6 | |
| 98F29003000000 | WRENCHES-STANDARD TORQUE SET | 15 | |
| 98F29003000000-57 | WRENCHES-STANDARD TORQUE SET | 1 | |
| 98L71203000000 | WRENCH SET,TORQUE-RR(MSN 1,2,4 AND 7 ONLY) | 2 | |
| 98L71203000001 | WRENCH SET,TORQUE-RR | 3 | |
| 98L71203005000 | WRENCH SET,TORQUE-EA | 2 | |
| 98V71203002000 | Torque wrench set-rr | 8 | |
| 99-PS60 | SET, SCREWDRIVER - BRISTOL WRENCH (XCELITE) (MINIMUM ORDER OF 3 REQUIRED) | 3 | |
| A13729 | TOOL - SPHERICAL BEARING INSTALLATION WRENCH SET | 1 | |
| A25013-1 | WRENCH SET-STOWAGE BIN RELEASE | 1 | |
| A25018-10 | WRENCH SET - STOWAGE BIN RELEASE | 7 | |
| A27092-139 | ACTUATORS/DEACTUATORS SET - PROXIMITY SENSOR WRENCH - SPEED, 3/8 INCH SQUARE DRIVE | 12 | |
| A28012-2 | SPANNER WRENCH SET - FUEL SUMP DRAIN VALVE | 7 | |
| A300-27-51-00-0253 | GROOVE WRENCH SET-FLAP SPIGOT | 1 | |
| A300-27-81-00-0246 | SPECIAL WRENCH SET-KRUEGER FLAP ACTUATOR | 1 | |
| A32021-1 | WRENCH- OFFSET 6" | 7 | |
| A71034-1 | WRENCH SET - AFT FLT MOUNT EBU-PACKAGE_[A71034-1] | 2 | |
| A78005-5 | TENSION LATCH WRENCH SET - FAN DUCT | 2 | |
| AB54001-D7K | PYLON REMOVAL- WRENCH SET | 1 | |
| AB71001-ZT6 | WRENCH SET - AFT ENGINE MOUNT | 1 | |
| AB73001-V1L | WRENCH SET, RUN ON OFF - MEC FUEL PUMP NUTS | 1 | |
| AD704B | ADJUSTABLE WRENCH SET-4PCS | 1 | |
| AGE-03381-401 | WRENCH SET-TRQ, FUEL LINE ISLR NUT | 3 | |
| AGE-04150-401 | WRENCH SET - INSTL/RMV, KEYLOCK | 1 | |
| AGE-04690- 401 | WRENCH SET - INSTL/RMVL, PYLON BSHG | 1 | |
| AGE-04690-401 | WRENCH SET - INSTL/RMVL, PYLON BSHG | 1 | |
| ATBRO | BOX RATCHET WRENCH 25° OFF-SET ( 1/4", 5/16" ) | 1 | |
| ATBRO-3134E | OFFSET BOX RATCHET WRENCH L=4-3/32 A=5/16 B=11/32 D=3/8 | 1 | |
| AW1015DHK | SET WRENCH L-SHAPE | 2 | |
| AW1015DK | SET, WRENCH, L-SHAPE | 2 | |
| AW1020DK | SET, WRENCH, L-SHAPE | 3 | |
| AWBCG1600 | Set, Wrench, Ball Hex, T-Handle, Red Handle, 8 pcs. | 1 | |
| AWBMCG1600 | SET, WRENCH, BALL HEX, T-HANDLE, RED HANDLE, 8 PCS. | 1 | |
| AWBPH13 | SET WRENCH L-SHAPE, | 3 | |
| AWBSG800A | T-HNDL SG BALL HEX WRENCH SET | 1 | |
| AWBSGM800A | 8 PC METRIC T-SHAPED/ L-SHAPED COMBINATION BALL HEX WRENCH SET (2-10 MM) | 1 | |
| AWCG1600B | 8 PC SAE T-SHAPED HEX WRENCH SET (3/32- 1/4") | 2 | |
| AWL1010DHK | SET, WRENCH, L-SHAPE, HEX, LONG (10 PCS. IN BHK10 METAL INDEX) (3/32" TO 3/8") | 2 | |
| AWM110DK | SET, METRIC, WRENCH, L-SHAPE, HEX, LONG (11 PCS) (2 TO 12 MM) | 2 | |
| AWS13 | SET, WRENCH, HEX, L- | 4 | |
| AWSG800A | T-HNDL SG SAE HEX WRENCH SET | 1 | |
| AWSGM800A | T-HNDL SG MM HEX WRENCH SET | 1 | |
| B78008-1 | WRENCH SET - THRUST REVERSER ACTUATOR | 2 | |
| B78008-19 | Wrench Set - Thrust Reverser Actuator | 12 | |
| B78014-37 | WRENCH SET - THRUST REVERSER ACTUATOR | 8 | |
| BH513A | 13PCS SAE L-SHAPED BALL HEX WRENCH SET (0.05-3/8) | 1 | |
| BHM9A | L-SHAPED METRIC BALL HEX WRENCH SET | 2 | |
| BHS13A | SET, WRENCH, L-SHAPE | 3 | |
| BLPCWS711B | 12-POINT SAE COMBINATION WRENCH SET | 1 | |
| BLPCWSM712B | 12PC COMBWRENCHSET CHROME 8-19 | 2 | |
| BLPCWSM714AP | COMBO SHORT WRENCH SET 6-19MM | 1 | |
| BLPSTWRKT | STRAP WRENCHES SET (4"-6") (BLPSTWR4A BLPSTWR6A) | 2 | |
| BOER708 | RATCHET COMBINATION WRENCH SET, STANDARD LENGTH,8PCS,SIZE 5/16”-3/4” | 2 | |
| BOERMLFS702 | 2PC 21-27MM XL FLEX WRENCH SET | 1 | |
| BOERMLS702 | 2PC 21-27MM XL WRENCH SET | 1 | |
| C27017-1 | Adaptor Set - Torque Wrench T/E Flaps | 3 | |
| C27041-1 | COUPLING SLEEVE FLAP ACTUATION WRENCH-SET | 11 | |
| C27109 | OFFSET WRENCH KIT - HINGE FITTING, HORIZONTAL STABILIZER | 1 | |
| C27109-1 | OFFSET WRENCH KIT - HINGE FITTING, HORIZONTAL STABILIZER | 2 | |
| C32021-1 | Wrench Set - Retainer Nut, Removal/Installation, Anti-Skid Transducer, Main Landing Gear | 24 | |
| C32022-17 | WRENCH SET MLG B-737 | 19 | |
| C71001-1 | WRENCH-OFFSET,RATCHE | 10 | |
| C71014-1 | WRENCH-OFFSET,SOLID | 18 | |
| C78014 | WRENCH SET-THRUST REVERSER HINGE,CFM56-3 | 1 | |
| C78014-6 | WRENCH SET - THURST | 14 | |
| C78014-9 | Wrench Set -Thrust Reverser Hinge. Cfm56-3 | 5 | |
| CDI10ST-1 | PRE-SET TORQUE WRENCH | 1 | |
| CHA-11 | TORQUE WRENCH-PRESET | 1 | |
| CROW FOOT SET | HURRICANE 1/2” DRIVE CROWFOOT WRENCH SET, 14 PIECE JUMBO CROWFOOT FLARE NUT WRENCH TOOL SET, SAE SIZES FROM 1-1/16" TO 2" WITH STORAGE TRAY, WITH FULLY POLISHED CHROME FINISHED | 1 | |
| DCF922D2 | CORDLESS BRUSHLESS 1/2" SQUARE DRIVE IMPACT WRENCH 20V XR LI-ION SET | 1 | |
| DS1010A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 5/32"-5/32" | 1 | |
| DS1212A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 3/16" - 3/16" | 2 | |
| DS1516A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 15/64" - 1/4" | 3 | |
| DS1615A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 1/4" - 15/64" | 1 | |
| DS1820A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 9/32" - 5/16" | 1 | |
| DS2018A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 5/16" - 9/32" | 1 | |
| DS2224A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 11/32" - 3/8" | 1 | |
| DS2422A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 3/8" - 11/32" | 1 | |
| DS809K | SNAP-ON - SET, WRENCH, OPEN END, IGNITION (9 PCS.) (1/8 IN. TO 3/8 AND ') | 3 | |
| DS88A | WRENCH, OPEN END, IGNITION, 15/60OFFSETS, 1/8" - 1/8" | 1 | |
| E-110 | OFFSET HEXWRENCH 2-5/8 | 1 | |
| F70291 | ADAPTER SET -0 TORQUE WRENCH USED TO TORQUE | 1 | |
| F70291-1 | Adapter set-torque wrench | 2 | |
| F70291-3 | ADAPTER SET-TORQUE WRENCH | 1 | |
| F70312-27 | WRENCH- CROWSFOOT/OFFSET 3.1/4" | 13 | |
| F70312-3 | WRENCH SET - CROWFOOT | 10 | |
| F70312-34 | WRENCH- CROWSFOOT/OFFSET 5.1/4" | 9 | |
| F70312-4 | WRENCH SET - CROWFOOT | 7 | |
| F70312-47 | WRENCH- CROWSFOOT/OFFSET 3" | 11 | |
| F72925 | WRENCH-SET -0 BEARING NUT FIN STAB.HINGE USED TO | 1 | |
| F72925-1 | Wrench set-bearing nut，fin stabilizer hinge | 2 | |
| F72925-2 | Wrench set-bearing nut，fin stabilizer hinge | 2 | |
| F72939 | WRENCH SET -0 THRUST REVERSER TO ENGINE ATTACH | 1 | |
| F72939-1 | Wrench Set - Thrust Reverser / Engine Attach Bolts | 1 | |
| F72955-31 | SET - SPANNER WRENCH, A.N. SPANNER TYPE (-1 THRU -12 MADE TO OBSOLETE A.N. SPECS, -31 THRU -42 ARE IDENTI ICAL TO -1 TO (THE BOEING COMPANY) | 1 | |
| F72959 | SET - SPANNER WRENCH, A.N. SPANNER TYPE (-1 THRU -12 MADE TO OBSOLETE A.N. SPECS, -31 THRU -42 ARE IDENTI ICAL TO -1 TO (THE BOEING COMPANY) | 11 | |
| F72959-XX | SET - SPANNER WRENCH, AN STANDARD TYPE | 1 | |
| F72999-1 | Wrench Set -Pneumatic System Ball Joint | 7 | |
| F80197-5 | Wrench Set - Limit Switch, Flap Control Unit | 25 | |
| F80197-6-7 | WRENCH SET-LIMIT SWITCH FLAP CONT UN | 1 | |
| F80204-1 | Wrench Set -Transfer Valve. Yaw Damper. Rudder Power Control Unit | 5 | |
| FADH704 | ADJ WRENCH SET, FADH704, MANUFACTURER SNAP-ON | 1 | |
| FADH704C | ADJUSTABLE WRENCH SET (6?12") -4 PC FLANK DRIVE® PLUS | 1 | |
| FADH704CO | WRENCH; ADJUSTABLEFLANK DRIVE PLUSCLUSHION GRIP; SNAP-ON TECHNOLOGIES INC-USA; FADH704; 6 IN - 12 IN; 4 PCS/SET | 1 | |
| FME65B00161-1 | WRENCH SET- HOLDING | 1 | |
| FY5-07287W87-02 | GROOVE NUT-WRENCH SET-RUDDER ATTACHMENT | 1 | |
| G0EX722K | SET, WRENCH COMBINAT INDUSTR, 12-PT | 3 | |
| G36018 | WRENCH SET -0 FAN AIR TEMPERATURE SENSOR | 1 | |
| G36018-7 | WRENCH SET - FAN AIR TEMPERATURE SENSOR MOUNTING BOLT | 6 | |
| G54015-1 | WRENCH SET - STRUT INSTALLATION, UPPER LINK, FRONT SPAR | 3 | |
| GEN139-4 | PIPE WRENCH SET-PIPE CAPACITY | 1 | |
| GOEX711K | COMBINATION WRENCH SET 11PCS 3/8"-1" | 1 | |
| GOEX722K | 22 PC 12-POINT SAE FLANK DRIVE® STANDARD COMBINATION WRENCH SET (5/16-1-5/8") | 3 | |
| GSE570 | WRENCHSET-INSTL/RMVL,PYLONBSHG | 1 | |
| GSE7200643 | TRUNNION CANISTER CORE OFFSET WRENCH-GSE7200643 | 1 | |
| GXDES1214ANP | WRENCH-BOX OFFSET | 1 | |
| Gedore-011017 | Gedore 011017 TSN25D - Preset Torque Wrenches, Range : 5-25 N.m / 4-18 lbf.ft | 1 | |
| Gedore-011019 | Gedore 011019 TSN25A - Preset Torque Wrench, Range : 5-25 N.m / 4-18 lbf.ft | 1 | |
| Gedore-011035 | Gedore 011035 TSN55 - Preset Torque Wrenches, Range : 15-55 N.m / 10-40 lbf.ft | 1 | |
| Gedore-011055 | Gedore 011055 TSN125 - Preset Torque Wrenches, Range : 40-125 N.m / 30-90 lbf.ft | 1 | |
| Gedore-011062 | Gedore 011062 TSN25D 50V INSULATED - Insulated preset Torque Wrenches, Range : 5-25 N.m / 4-18 lbf.in | 1 | |
| Gedore-011072 | Gedore 011072 TSN25A 50V INSULATED - Insulated preset Torque Wrenches, Range : 5-25 N.m / 4-18 lbf.in | 1 | |
| Gedore-011100 | Gedore 011100 TBN2 - Preset Torque Wrenches, Range : 0.4-2 N.m / 3.5-18 lbf.in | 1 | |
| Gedore-011108 | Gedore 011108 TBN2 + RATCHET 50V INSULATED - Insulated preset Torque Wrenches, Range : 0.4-2 N.m / 3.5-18 lbf.in | 1 | |
| Gedore-011110 | Gedore 011110 TBN2G - Preset Torque Wrenches, Range : 0.4-2 N.m / 3.5-18 lbf.in | 1 | |
| Gedore-011200 | Gedore 011200 TBN10 - Preset Torque Wrenches, Range : 1-10 N.m / 9-89 lbf.in | 1 | |
| Gedore-011208 | Gedore 011208 TBN10 + RATCHET 50V INSULATED - Insulated preset Torque Wrenches, Range : 1-10 N.m / 9-89 lbf.in | 1 | |
| Gedore-011210 | Gedore 011210 TBN10G - Preset Torque Wrenches, Range : 1-10 N.m / 9-89 lbf.in | 1 | |
| Gedore-011301 | Gedore 011301 TSN5/45 - Preset Torque Wrenches, Range : 1-5 N.m / 10-45 lbf.in | 1 | |
| Gedore-011401 | Gedore 011401 TSN10/90 - Preset Torque Wrenches, Range : 2-10 N.m / 20-90 lbf.in | 1 | |
| Gedore-012700 | Gedore 012700 HEX SETTING ADAPTOR 3.2-5.5 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012705 | Gedore 012705 HEX SETTING ADAPTOR 6-9 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012710 | Gedore 012710 HEX SETTING ADAPTOR 10-13 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012715 | Gedore 012715 HEX SETTING ADAPTOR 14-17 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012720 | Gedore 012720 HEX SETTING ADAPTOR 18-21 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012722 | Gedore 012722 HEX SETTING ADAPTOR 22-25 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-050000 | Gedore 050000 TBN25E - Preset Torque Wrenches, Range : 5-25 N.m / 4-18 lbf.ft | 1 | |
| Gedore-050010 | Gedore 050010 TBN25E G - Preset Torque Wrenches, Range : 5-25 N.m / 4-18 lbf.ft | 1 | |
| Gedore-050100 | Gedore 050100 TBN65E - Preset Torque Wrenches, Range : 10-65 N.m / 7-48 lbf.ft | 1 | |
| Gedore-050110 | Gedore 050110 TBN65E G - Preset Torque Wrenches, Range : 10-65 N.m / 7-48 lbf.ft | 1 | |
| Gedore-050200 | Gedore 050200 TBN135E - Preset Torque Wrench, Range : 27-135 N.m / 18-100 lbf.ft | 1 | |
| Gedore-050210 | Gedore 050210 TBN135E G - Preset Torque Wrench, Range : 27-135 N.m / 18-100 lbf.ft | 1 | |
| Gedore-050300 | Gedore 050300 TBN200E - Preset Torque Wrenches, Range : 40-200 N.m / 29-147 lbf.ft | 1 | |
| Gedore-050310 | Gedore 050310 TBN200E G (14x18) - Preset Torque Wrenches, Range : 40-200 N.m / 29-147 lbf.ft | 1 | |
| Gedore-A45271 | Gedore A45271 SETTING ADAPT - HEX 1.0-2.5mm, Torque Wrench End Fittings | 1 | |
| Gedore-A45272 | Gedore A45272 SETTING ADAPT - HEX 3.0-5.0mm, Torque Wrench End Fittings | 1 | |
| Gedore-A45273 | Gedore A45273 SETTING ADAPT - HEX 6.0-8.0mm, Torque Wrench End Fittings | 1 | |
| HER-18 | LONG SOCKET WRENCH SET (1/4-1") | 1 | |
| HEX WRENCH L-SHAPED SET | HEX WRENCH L-SHAPED SET | 1 | |
| HU26929 | WRENCH-CROFWFOOT, OFFSET OPEN-END | 3 | |
| J3200D | IGNITION WRENCH 1-SET | 1 | |
| J53004 | WRENCH SET-TORQUE ADJUSTMENT,RADOME LATCH | 1 | |
| J53004-1 | WRENCH SET - TORQUE ADJUSTMENT, RADOME LATCH | 10 | |
| JHW1234TOB | 1-1/16 WRENCH-OFFSET BOX TUBUL | 1 | |
| JHWMWS-15A | 15 PC COMB WRENCH SET-SAT | 1 | |
| JHWMWS-26 | OPEN END WRENCH SET 6-PC | 1 | |
| JHWMWS-30 | RAT. BOX WRENCH SET 5-PC | 1 | |
| JHWMWS-31 | OPEN END WRENCH SET 10-PC | 1 | |
| JHWWS-12 | RAT. BOX WRENCH SET 5-PC | 1 | |
| JHWWS-474 | SPANNER WRENCH SET 4-PC | 1 | |
| JHWWS-5 | RAT. BOX WRENCH SET 5-PC | 1 | |
| JHWWS-7707 | BOX WRENCH SET 7-PC | 1 | |
| JRC109 | WRENCH-BOX 5/16x3/8 OFFSET | 1 | |
| K21028-25 | WRENCH - OFFSET BOX END | 4 | |
| K27033 | WRENCH SET - WING TE | 1 | |
| K27033-1 | WRENCH SET - WING TRAILING EDGE FLAP SUPPORT NUT | 3 | |
| K306A-1000 | FACOM K.306A1000 - 200-1000NM 306. HP 30MM TORQUE WRENCH SET + K.151B | 1 | |
| K32022-1 | WRENCH-AXLE NUT, NLG SET | 18 | |
| K53005-1 | Wrench Set - Torque Adjustment, Radome Latch | 5 | |
| KEN5010620K | WRENCH,ADJUSTABLE;|ADJUSTABLE WRENCH SET OF 2PC- 6"&10"; | 1 | |
| LTA1214 | WRENCH, OPEN END, LOW-TORQUE SLIMLINE, 15° OFFSETS, 3/8"-7/16" | 2 | |
| LTA1416 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 7/16"-1/2" | 1 | |
| LTA1618 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 1/2"-9/16" | 1 | |
| LTA2022 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 5/8"-11/16" | 3 | |
| LTA2426 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 3/4"-13/16" | 1 | |
| LTA2428 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 3/4"-7/8" | 1 | |
| LTA3032 | WRENCH, OPEN END, LOW TORQUE SLIMLINE, 15° OFFSETS, 15/16"-1" | 1 | |
| LTA805K | 5 PC SAE 15° OFFSET LOW TORQUE SLIMLINE OPEN-END WRENCH SET (7/16-1") | 2 | |
| LTA812 | 2 PC SAE 15° OFFSET LOW TORQUE SLIMLINE OPEN-END WRENCH SET (3/8-1-7 /8 ") | 2 | |
| MIT65B01201 | WRENCH- 10 OFFSET | 7 | |
| MIT65B19248 | WRENCH SET - TRAILING EDGE FLAPS | 1 | |
| MT173-5 | TORQUE WRENCH EXTENSION TOOL SET - FAN NUT | 1 | |
| MT173-5/PHP | TORQUE WRENCH EXTENSION TOOL SET - FAN NUT | 1 | |
| OES22B | LONG COMBO WRENCH SET (3/8-3/4") | 2 | |
| OEX707B | COMBINATION WRENCH SET 7 PC 12-POINT (3/8-3/4") | 1 | |
| OEX709B | SET WRENCH COMBINATION - 9 PC 12-POINT (3/8–7/8') | 1 | |
| OEX711B | 11 PC 12-POINT SAE FLANK DRIVE® COMBINATION WRENCH SET (3/8–1") | 2 | |
| OEX714KB | 4 PC 12-POINT SAE FLANK DRIVE COMBINATION WRENCH SET (3/8-1-1/8" AND 1-1/4") | 1 | |
| OEX724K | Set, Wrench, Combination, 12-Point (24 pcs.) (1/4" to 1 5/8") | 4 | |
| OEX724KB | 12-POINT SAE FLANK DRIVE® COMBINATION WRENCH SET (1/4–1-5/8") | 1 | |
| OEXL707B | SET, WRENCH COMBINATION, LONG 12-PT | 2 | |
| OEXLM710B | COMBINATION WRENCH SET SNAP DRIVE FLANK POINT (SNAP-ON) | 1 | |
| OEXS715K | 15 PC 12-POINT SAE FLANK DRIVE® SHORT COMBINATION WRENCH SET (1/4-1") | 2 | |
| OEXS721KB | COMBINATION WRENCH SET 1/4-1 3/8 | 1 | |
| OFW4KT | OFW4KT- 4 PC OIL FILTER WRENCH SET (BLUE-POINT®) | 1 | |
| OSH711B | Set, Wrench, Combination, 6-Point (11 pcs.) (3/8" to 1") | 1 | |
| OX1706B | Set, Wrench, Combination, Midget, 12-Point (6 pcs.)(7/16" to 3/4") | 1 | |
| OXI707BK | 7 PC 12-POINT SAE FLANK DRIVE® MIDGET COMBINATION WRENCH SET (3/16-3/8") | 2 | |
| OXI709SBK | Set, Wrench, Combination, Midget, 6-Point (10 pcs.) (1/8" to 3/8") | 1 | |
| OXKR707 | 12-POINT SAE FLANK DRIVE® 0° OFFSET SHORT RATCHETING COMBINATION WRENCH SET (3/8-3/4") | 1 | |
| OXR707A | SAE FLANK DRIVE® NON-REVERSIBLE RATCHETING COMBINATION WRENCH SET (3/8-3/4") | 1 | |
| QL50I-2A_*20-50IN-LB | TORQUE WRENCH-PRESET 50 IN-LB | 1 | |
| R-2426 | 3/4 -13/16 SNAP-ON OFFSET RATCHETING BOX WRENCH | 1 | |
| R1011C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-11/32", 12-POINT | 3 | |
| R1012C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| R1214C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 4 | |
| R1618C | 1/2 -9/16 SNAP-ON OFFSET RATCHETING BOX WRENCH | 5 | |
| R2022C | 5/8 - 11/16 SNAP-ON OFFSET RATCHETING BOX WRENCH | 4 | |
| R2428C | WRENCH, BOX, RATCHETING, 0° OFFSET, 12-POINT, 3/4"-7/8" (DOGBONE) | 2 | |
| R3032C | 15/16-1" 12-POINT SAE 0° OFFSET RATCHETING BOX WRENCH | 1 | |
| R810C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 4 | |
| RA166412MB | 12PC COMBINATION WRENCH BOX SET 6-19mm | 1 | |
| RA3674 | 8 PCS 3/8" Dr Torque Wrench Set 19-110nm | 1 | |
| RA4625M | 24pcs Socket Wrench Set Black CR-V | 1 | |
| RA4673 | 11 PCS 1/2" Dr Torque Wrench Set 40-210n | 1 | |
| RAAA1604 | A/F Combination Wrench Set 1/4" - 1 1/4" | 1 | |
| RATTK-4P | 12PC COMBI WRENCH CASE SET 8-10, max 24 | 1 | |
| RB604C | 4 PC 12-POINT SAE 0° OFFSET RATCHETING BOX WRENCH SET | 1 | |
| RBA9966 | Barrel Wrench Set T-Handle (2 Piece) | 2 | |
| RBT18717 | Compressor Case Wrench Set (250-C20 Engine Series) | 3 | |
| RBW895-3101-05-101 | Wrench Set, Flight Control Servo-Actuator Clutch Adjustment | 2 | |
| RBZ1214 | STANDARD O” OFFSET RATCHETING BOX WRENCH, 12 POINT 3/8-7/16” | 3 | |
| RBZ605 | SET, WRENCH, RATCHETING BOX, LATCH-ON®, 0° OFFSET, 1/4"-5/16" TO 3/4"-7/8" (5 PCS.) | 3 | |
| RSE1071 | WRENCH SET, SPANNER-ANTI-ICE DUCT (SET) | 11 | |
| RSE1071 REV NC | WRENCH SET, SPANNER-ANTI-ICE DUCT (SET) | 1 | |
| RSE1098 | WRENCH SET - AFT ENGINE MOUNT | 20 | |
| RSE1098 REV B | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RSE1098-1 | WRENCH SET - AFT ENGINE MOUNT | 11 | |
| RSE1098-1-3-5 | WRENCH SET - AFT ENGINE MOUNT | 1 | |
| RSE1098-3 | WRENCH SET - AFT ENGINE MOUNT | 8 | |
| RSE1113 | WRENCH SET - AFT ENGINE MOUNT | 20 | |
| RSEI07I | WRENCH SET, SPANNER-ANTI-ICE DUCT (SET) | 1 | |
| RSEI098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RTB 607 | SNAP-ON - SET, WRENCH, RATCHETING BOX, T-HANDLE, 12-POINT (7 PCS.) (1/4 IN. TO 9/16 IN.) | 4 | |
| RTB607 | WRENCH SET 7PSC T-HANDLE | 4 | |
| RXFS605B | 5 PC 6-POINT DOUBLE END SAE FLARE NUT WRENCH SET (1/4?13/16") | 2 | |
| RYA1011 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 5/16IN-11/32IN, 12-POINT | 3 | |
| RYA1214 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 3/8IN-7/16IN, 12-POINT | 4 | |
| RYA1618 | 1/2–9/16" 12-POINT SAE 25° OFFSET RATCHETING BOX WRENCH | 2 | |
| RYA810 | WRENCH,RATCHETING BOX,25 OFFSET.STANDARD LENGHT,1/4"-5/16",12- POINT | 3 | |
| SBX605 | WRENCH SET ""S"" SHAPE-5 Pcs | 2 | |
| SMA 8MM | HUBER-SUHNER STEEL TORQUE WRENCH SMA 8MM – FOR USE WITH SMA/PC 3.5 CONNECTOR SERIES. THE TORQUE SETTING IS 1.00 NM, AND IT HAS A 8 MM/.315” OPENING. | 1 | |
| SOEX710 | 10 PC 12-POINT SAE FLANK DRIVE® PLUS COMBINATION WRENCH SET | 2 | |
| SOEXL707B | LONG COMBO WRENCH SET (3/8-3/4") | 1 | |
| SOSR11 | 11/32" SAE, #11 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 1 | |
| SOSR12 | 3/8" SAE, #12 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 1 | |
| SOSR8 | 1/4" SAE, #8 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 1 | |
| SOTMIXBAH18 | WRENCHE SET (19-42MM) | 1 | |
| SOXR01FBRA | 8 PC 12-POINT SAE FLANK DRIVE PLUS 0° OFFSET NON-REVERSING RATCHETING COMBINATION WRENCH FOAM SET (1/4–11/16") | 1 | |
| SOXR8A | WRENCH OFFSET NON-REVERSING RATCHETING COMB | 1 | |
| SOXRM01FBRA | 11 PC 12-POINT METRIC FLANK DRIVE® PLUS 0° OFFSET NONREVERSING RATCHETING COMBINATION WRENCH SET WITH PRO-FI™ ORGANIZATION (6– 16 MM) | 1 | |
| SOXRM02FBRA | 6 PC 12-POINT METRIC FLANK DRIVE® PLUS 0° OFFSET NON-REVERSING RATCHETING COMBINATION WRENCH SET WITH PRO-FIT™ ORGANIZATION (17-24 MM) | 1 | |
| SPL-10485 | WRENCH - CROWFOOT, OFFSET OPEN-END (7/8 INCH X 3/8 | 1 | |
| SS-508 | BRISTOL SPLINE KEY WRENCH - 9-PIECE SET | 3 | |
| ST-2599-6S-K | PRE-SET TENSION WRENCH | 1 | |
| ST2580-163A | WRENCH SET-PASSENGER SEATS, ANTI- RATTLE NUT | 11 | |
| ST2580-173 | WRENCH - OFFSET CROW | 4 | |
| ST2580-292 | SPANNER WRENCHES - OFFSET AND STRAIGHT | 1 | |
| ST2580-292 | SPANNER WRENCHES - OFFSET AND STRAIGHT | 1 | |
| ST2580-469-2-12-20 | Standard tool-wrench offset box end | 1 | |
| ST2580-469-2-12-20-B | Standard Tool - Wrench Offset Box End | 2 | |
| ST2580-469-2-22-20 | WRENCH - OFFSET | 1 | |
| ST2580-469-2-24-40B | Standard tool-wrench offset box end | 1 | |
| ST2599A12SK | PRE-SET TORQUE WRENCH 1&1/4" | 1 | |
| STAHLWILLE 1/4 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE 3/16 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE 3/8 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE 5/16 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE 5/32 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE 7/32 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE 9/64 | BALL-ENDED HEXAGON KEY WRENCH SET | 1 | |
| STAHLWILLE MINI WRENCH | BALL-ENDED HEXAGON KEY MINI WRENCH SET | 1 | |
| T101588 | WRENCH SET - COUPLING NOT USED (HP, EP) | 1 | |
| T900175-1 | OFFSET WRENCH-T900175-1 | 2 | |
| TB100-14MMAFOE | WRENCH TORQUE, PRESET 13.5LBFIN MIGRATION-MAS-PSEU | 1 | |
| TB100-14MMFOE | WRENCH TORQUE PRESET 13.5LBFIN MIGRATION-MAS-PSEU | 1 | |
| THXB1214A- | WRENCH,BOXSTANDARD LG 10DEG OFFSET,3/8 X 7/16IN,12-PT | 1 | |
| THXB1618A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1/2 X 9/16IN,12-PT | 1 | |
| THXB2022A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 5/8 X 11/16IN,12-PT | 1 | |
| THXB2426A | WRENCH,BOX,STANDARD LG 10DEG OFFSET 3/4 X 13/16IN,12-PT | 1 | |
| THXB2830A | WRENCH,BOX STANDARD LG,10DEG OFFSET 7/8 X 15/16IN,12-PT | 1 | |
| THXB3234A- | WRENCH,BOX,STANDARD LG 10DEG OFFSET 1 X 1-1/16IN,12-PT | 1 | |
| THXB4042A | WRENCH,BOX,STD LG 10DEG OFFSET 1-1/4 X 1-5/16IN,12-PT | 1 | |
| THXSM67A | WRENCH BOX OFFSET 5-7MM 12PT | 1 | |
| TMY20-20-302 | WRENCH SET “W-O-F” TO-20-808 | 2 | |
| TOOL132 | McFarlane TOOL132 Anodized Blue 12 thru 1 Push-Pull Control Wrench Set | 1 | |
| TQAD422-8TL | WRENCH 1-15/16IN OFFSET | 1 | |
| VO806B | WRENCH SETS OPEN- END STANDAR: 1/4 X 5/16 - 3/8 X 7/16 - 1/2 X 9/16 - 5/8 X 11/16 - 3/4 X 13/16 - 7/8 X 15/16 | 1 | |
| VS814A | 14 PC SAE FOUR-WAY ANGLE HEAD OPEN-END WRENCH SET (3/8-1-1/4") | 1 | |
| W003320A | 8 PCS FLEX-HEAD RATCHETING COMBINATION WRENCH SET WITH ORGANIZER BAG | 1 | |
| WBE23505 | 45-DEGREE OFFSET BOX END WRENCH SET | 1 | |
| WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | WRENCH SET, L-SHAPE, BALL HEX, STANDARD (13 PCS.) (.050" TO 3/8') | 1 | |
| WRENCH SET, L-SHAPE, HEX (15 PCS.) (.028" TO 3/8") | WRENCH SET, L-SHAPE, HEX (15 PCS.) (.028" TO 3/8") | 1 | |
| WRENCH SET, RATCHETING BOX, 0° OFFSET, 12-POINT (4 PCS.) (3/8" TO 7/8") | WRENCH SET, RATCHETING BOX, 0° OFFSET, 12-POINT (4 PCS.) (3/8" TO 7/8") | 1 | |
| WRENCH, BOX, DEEP, 60° OFFSET, 1/4"-5/16", 12-POINT | WRENCH, BOX, DEEP, 60° OFFSET, 1/4"-5/16", 12-POINT | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| WRENCHPAK2 | WRENCH PAK-METRIC SETS/10MM WR | 1 | |
| WS-3510 | 30-DEGREE SERVICE WRENCH SET, 10 PIECE | 1 | |
| WSSCF-15 | CROWFOOT WRENCH SET WITH 1/2-INCH DRIVE, 15-PIECE | 1 | |
| XB1214A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XB1416A | WRENCH, BOX, STANDARD LENGTH, STANDARD LENGTH, 10° OFFSET, 7/16"-1/2", 12-POINT | 1 | |
| XB1618A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XB1820A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XB2022A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 5/8"-11/16", 12-POINT | 1 | |
| XB2224A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 11/16"-3/4", 12-POINT | 1 | |
| XB2426A | WRENCH, BOX, STANDARD LENGTH, 10° OFFSET, 3/4"-13/16", 12-POINT | 1 | |
| XBM1011A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-11 MM, 12 POINT | 1 | |
| XBM1012A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 10-12 MM, 12 POINT | 1 | |
| XBM1315A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 13-15 MM, 12 POINT | 1 | |
| XBM1417A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 14-17 MM, 12 POINT | 1 | |
| XBM1618A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 16-18 MM, 12 POINT | 1 | |
| XBM1719A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 17-19 MM, 12 POINT | 1 | |
| XBM2224A | WRENCH, METRIC, BOX, STANDARD LENGTH, 10 OFFSET, 22-24 MM, 12 POINT | 1 | |
| XDES1214A | #12-#14, 3/8-7/16" HEX, SAE SPLINE 15° OFFSET BOX WRENCH | 3 | |
| XDES1618A | #16-#18, 1/2-9/16" HEX, SAE SPLINE 15° OFFSET BOX WRENCH | 2 | |
| XDES810A | #8-#10, 1/4-5/16" HEX, SAE SPLINE 15° OFFSET BOX WRENCH | 3 | |
| XDH | KIT WRENCH HI-PERFORMANCE 15° OFFSET | 1 | |
| XDH1618A | WRENCH HI-PERFORMANCE 15° OFFSET 1/2"-9/16" | 1 | |
| XDH2024A | WRENCH HI-PERFORMANCE 15° OFFSET 5/8"- 3/4" | 1 | |
| XDH2226A | WRENCH HI-PERFORMANCE 15° OFFSET 11/16"-13/16" | 1 | |
| XDH605 | SET, WRENCH, HI-PERF | 1 | |
| XDH8018A | WRENCH HI-PERFORMANCE 15° OFFSET 1/4"-5/16" | 1 | |
| XDHF 605 | SNAP-ON - SET, WRENCH, HI-PERFORMANCE, BOX, 0 DEG. OFFSET, 12-POINT, 5 PCS. (1/4 IN. TO 13/16 IN.) | 2 | |
| XDHF605 | SET, WRENCH, HI-PERF | 2 | |
| XDHF810 | 1/4–5/16" 12-POINT SAE FLANK DRIVE HIGH-PERFORMANCE 0° OFFSET BOX WRENCH | 2 | |
| XID1213A | WRENCH, BOX, 10° OFFSET, MIDGET, 12-POINT, 3/16"-13/64" | 1 | |
| XID1415A | WRENCH, BOX, 10° OFFSET, MIDGET, 12-POINT, 7/32"- 15/64" | 1 | |
| XID1618A | WRENCH, BOX, 10° OFFSET, MIDGET, 12-POINT, 1/4"-9/32" | 1 | |
| XID2022A | WRENCH, BOX, MIDGET, 10° OFFSET, 5/16"-11/32", 12-POINT | 1 | |
| XID604KA | Set, Wrench, Box, Midget, 10° Offset, 12-Point (4 pcs.) (3/16"-13/64" to 5/16"-11/32") | 2 | |
| XO1012 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| XO1214 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XO1618 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| XO1820 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 9/16"-5/8", 12-POINT | 1 | |
| XO2024 | WRENCH, BOX, STANDARD LENGTH, 60° DEEP OFFSET, 5/8"-3/4", 12-POINT | 1 | |
| XO605 | 12-POINT 7/8?15/16" DEEP 60° OFFSET BOX WRENCH | 1 | |
| XO810 | 1/4-5/16" 12-POINT SAE FLANK DRIVE® 60° DEEP OFFSET BOX WRENCH | 1 | |
| XS1012A | WRENCH, BOX, SHORT, 10° OFFSET, 5/16"-3/8", 12-POINT | 2 | |
| XS1214A | WRENCH, BOX, SHORT, 10° OFFSET, 3/8"-7/16", 12-POINT | 3 | |
| XS1416A | WRENCH, BOX, SHORT, 10° OFFSET, 7/16"-1/2", 12-POINT | 2 | |
| XS1618A | WRENCH, BOX, SHORT, 10° OFFSET, 1/2"-9/16", 12-POINT | 2 | |
| XS1820A | WRENCH, BOX, SHORT, 10° OFFSET, 9/16"-5/8", 12-POINT | 2 | |
| XS2024A | WRENCH, BOX, SHORT, 10° OFFSET, 5/8"-3/4", 12-POINT | 1 | |
| XS2226A | WRENCH, BOX, SHORT, 10° OFFSET, 11/16"-13/16", 12-POINT | 1 | |
| XS609A | 9 PC 12-POINT SHORT 10° OFFSET BOX WRENCH SET | 1 | |
| XS67A | WRENCH, BOX, SHORT, 10° OFFSET, 3/16"-7/32", 12-POINT | 1 | |
| XS810A | WRENCH, BOX, SHORT, 10° OFFSET, 1/4"-5/16", 12-POINT | 3 | |
| XSM1820A | WRENCH, METRIC, BOX, SHORT HANDLE, 10 OFFSET 18-20MM, 12-POINT | 1 | |
| XSM67A | WRENCH, METRIC, BOX, SHORT, 10 OFFSET, 6-7 MM, 12-POINT | 1 | |
| XSM89A | WRENCH, METRIC, BOX, SHORT, 10 OFFSET, 8-9 MM, 12-POINT | 1 | |
| XSO1214A | WRENCH, BOX, SHORT, 60° DEEP OFFSET, 3/8"-7/16", 12-POINT | 1 | |
| XSO1618 | SHORT HANDLE 60 DEGREE OFFSET 1/2-9/16 BO WRENCH SET 12 POINT | 1 | |
| XSO2022 | 5/8–11/16" 12-POINT SHORT 60° DEEP OFFSET BOX WRENCH | 1 | |
| XSO2024A | 5/8–3/4" 12-POINT SHORT 60° DEEP OFFSET BOX WRENCH | 1 | |
| XSO810 | SHORT HANDLE 60 DEGREE OFFSET 1/4-5/16 BOX WRENCH SET 12 POINT | 1 | |
| XSO810A | WRENCH, BOX, SHORT, 60° DEEP OFFSET, 1/4"-5/16", 12-POINT | 1 | |
| XSO89 | 1/4–9/32" 12-POINT SHORT 60° DEEP OFFSET BOX WRENCH | 1 | |
| 5120-01-429-1087 | 42 PC 3/8" DRIVE SAE OPEN-END CROWFOOT WRENCH SET (7/16-3") | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
