| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| SL90-315-3750 | WRENCH WRENCH - NO | 18 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| (CALIB) TER175 | TORQUE WRENCH - 175 ft-lb/230 Nm - 1/2 DRIVE TOOL - Renommé A44076 | 1 | |
| -SL90-374-1-1250 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 5 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11MIT65B01221-4 | HOLDING WRENCH - METERING ROD ANCHOR TUBE, NOSE LANDING GEAR | 1 | |
| 13002 | WRENCH TORQUE, NORBAR, MODEL 5, 10-50 LBF-IN, 1/4 INCH DV FEMALE HEX | 3 | |
| 13438 | NORBAR TORQUE WRENCH 8-35 FT.LBF | 1 | |
| 13445 | NORBAR TORQUE WRENCH 45-220 FT.LBF | 1 | |
| 13MIT65B01221-4 | WRENCH - LOWER CAM, INNER CYLINDER, NOSE LANDING GEAR | 5 | |
| 14701NSA506310 | WRENCHES-NOTCHED, TIGHTENING OF NUTS NSA5063 | 1 | |
| 14701NSA506316/18 | WRENCHES-NOTCHED, TIGHTENING OF NUTS NSA5063 | 1 | |
| 15003 | NORBAR TORQUE WRENCH 3/8 SD20-100NM | 1 | |
| 1C6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856 REV NC | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856G01 | WRENCH SPANNER - NUT NO. 6 BEARING | 1 | |
| 1C6897 | WRENCH SPANNER NUT-NO 5R B | 1 | |
| 1C6897G01 | WRENCH SPANNER NUT-NO 5R B | 1 | |
| 1C6897G02 | WRENCH, SPANNER - NO. 5 BEARING RETAINING NUT | 1 | |
| 1C6952 | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| 1C6952 REV A | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| 1C6952P01 | WRENCH,SPANNER-OIL TUBE-NO 5 BRG | 1 | |
| 1C9020G01 | WRENCH, SPAN-NO. 5 BRG. IN. RACE | 1 | |
| 1C9774 | WRENCH SET, RETAINER NUT-NO. 5 BRG INNER RACE | 1 | |
| 2C14007G02 | RETAINER NUT WRENCH-NO.6 BEARING. | 1 | |
| 2C14024G01 | WRENCH SET, RETAINER NUTS-NO4R&5R INNER BRG. RACE | 1 | |
| 2C14650 | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14650 REV F | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14650G01 | WRENCH, RETAINER NUT-INNER RACE NO 6 BEARING | 4 | |
| 2C14650G02 | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14664G01 | WRENCH SET, RETAINER NUT - NO. 5 INNER BEARING RACE | 4 | |
| 2C14664G02 | WRENCH SET, RETAINER NUT - NO. 5 INNER BEARING RACE | 1 | |
| 2C14664P02 | WRENCH SET, RETAINER NUT - NO. 5 INNER BRG RACE | 1 | |
| 2C6001 | WRENCH - SPANNER NUT - NO 3 BEARING RACE | 1 | |
| 2C6001G01 | WRENCH SPANNER NUT - NO. 3 BEARING | 1 | |
| 2C6001G01 | WRENCH, SPANNER NUT - NO. 3R B | 1 | |
| 2C6027 | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027 REV A | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6050 | WRENCH, NO. 4 BRG-SPLIT NUT COLLAR | 1 | |
| 2C6050G01 | WRENCH, NO. 4 BEARING-SPLIT | 1 | |
| 2C6084G04 | CF6-50 - WRENCH, SPANNER - RETAINER NUT, NO.5 BEARING INNER RACE | 1 | |
| 2C6265 | WRENCH, SPANNER NUT - NO.1 BRG | 1 | |
| 2C6265 REV G | WRENCH, SPANNER NUT - NO.I BRG | 1 | |
| 2C6805 | WRENCH, SPANNER NUT - NO. 3 BRG. | 1 | |
| 2C6805 REV C | WRENCH, SPANNER NUT - NO. 3 BRG. | 1 | |
| 2C6805G01 | WRENCH, SPANNER NUT-NO.3 BEARING | 1 | |
| 2C6805G02 | WRENCH, SPANNER NUT - NO. 3 BEARING | 2 | |
| 2C6826 | WRENCH, SPANNER NUT - NO. 2 BRG, | 1 | |
| 2C8605 | WRENCH, SPANNER NUT- NO. 3 BRG | 1 | |
| 2MIT65B01202 | WRENCH ADAPTER - GLAND NUT, NOSE GEAR | 8 | |
| 2MIT65B01202-1 | Wrench adapter-gland nut，nose gear | 1 | |
| 2MIT65B01503 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 2MIT65B05413-1 | WRENCH - RETAINER, RESTRICTOR PLATE, NOSE LANDING GEAR | 1 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 2MIT65B82591 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| 3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 11 | |
| 460004716C | WRENCH-NOSE WHEEL | 1 | |
| 4MIT65B01500 | SPANNER WRENCH - NOSE LANDING GEAR RETRACT ACTUATOR | 1 | |
| 4MIT65B01503 | SOCKET - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| 4MIT65B82585 | SPANNER WRENCH - NOSE LANDING GEAR RETRACT ACTUATOR | 1 | |
| 5552A24 | Q-400 NOSE AXLE NUT WRENCH | 1 | |
| 6020NM | TORQUE WRENCH (NORBAR - RANGE (120.0-800.0) NM/(103.0-605.0) FT.1BS) | 1 | |
| 665248 | WRENCH ASSEMBLY - NOSE WHEEL NUT | 1 | |
| 6796645 | WRENCH-SPLINE, NO. 60 PROP SHAFT THRUST BEARING | 1 | |
| 6796748 | WRENCH, SPANNER - NOSE SCAVENGER OIL PUMP OIL SCREEN | 4 | |
| 23002215 | WRENCH-FUEL NOZZLE | 2 | |
| 23007638 | WRENCH-FUEL NOZZLE INSTALLA ON OR EQUIVALENT | 3 | |
| 50010004 | 755/4-No4 MANOSKOP TORQUE WRENCH 4-40Nm. No setting scale, have to be set with testers | 1 | |
| 50010010 | 755/10-No10 MANSKOP TORQUE WRENCH 20-100Nm No setting scale, have to be set with testers | 1 | |
| 50010020 | 755/20-No20 MANSKOP TORQUE WRENCH 40-200Nm No setting scale, have to be set with testers | 1 | |
| 50010030 | 755/30-No30 MANSKOP TORQUE WRENCH 60-300Nm No setting scale, have to be set with testers | 1 | |
| 50030080 | 71/80-MANOSKOP 71 T/WRENCH 160-800Nm | 1 | |
| 50100001 | 755R/1-MANOSKOP T/WRENCH 1.5-12.5Nm | 1 | |
| 50181010 | TORQUE WRENCH SERVICE MANOSKOP® WITH RECEPTACLE FOR INSERT TOOLS NO. 730N/10 20-100 NM 15-75 FT.LB 50181010 | 1 | |
| 50580001 | TORQUE WRENCH BASIC 730N/2 SERVICE-MANOSKOP, 17.5-87.5 IN.LB | 1 | |
| 65712165 | 65712165-LONG-NOSE SELF-GRIP WRENCH | 1 | |
| 6MIT65B01221-1 | WRENCH - LOCKING BOLT, RESTRICTOR TUBE ASSEMBLY, NOSE LANDING GEAR | 1 | |
| 6MIT65B01500 | CROWFOOT - TORQUE WRENCH, NOSE LANDING GEAR ACTUATOR | 2 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 714/10 | MANOSKOP TRQ WRENCH 10-100NM | 1 | |
| 714/2 | MANOSKOP TORQUE WRENCH 2-20NM | 1 | |
| 72-0254 | WRENCH - NIPPLE LINE, NO. 5 BEARING 0 (72-0254 AND PRE CFMI SB 72-0676)) | 1 | |
| 721NF/80 | STAHLWILLE 721NF/80 MONOSKOP TORQUE WRENCH 160-800 NM 120-600 FT LB STAHL WILLE | 5 | |
| 730N/10 | TORQUE WRENCH SERVICE MANOSKOP® WITH RECEPTACLE FOR INSERT TOOLS NO. 730N/10 20-100 NM 15-75 FT.LB 50181010 | 1 | |
| 755R/1 | MANOSKOP T/WRENCH 1.5-12.5NM | 1 | |
| 8168-IA | WRENCH- FUEL NOZZLE DISASSEMBLY TOOL | 1 | |
| 833274-1 | WRENCH - ADJUSTER, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K | 2 | |
| 833275-1 | WRENCH - JAMNUT, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K - 737-100/200/300/400/500 | 1 | |
| 834770 | Wrench - Monopole | 1 | |
| 834770-1 | Wrench - Monopole, APU 331-500(B) | 1 | |
| 856A1000 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G09 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 6 | |
| 856A1000G08 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 4 | |
| 856A1000G09 | Wrench, Installation and Removal - No. 3 Bearing Locking Nut (wrench) | 6 | |
| 856A1042 | WRENCH, TORQUE - NO 4 BRG RETAINER | 3 | |
| 856A1042G01 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G02 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G03 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G04 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G05 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G06 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G07 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 856A1042G08 | WRENCH, TORQUE - NO 4 BRG RETAINER | 10 | |
| 856A1045G01 | WRENCH NO.3 BEARING- RETAIN | 6 | |
| 856A1098G01 | ADAPTER TORQUE WRENCH- HPT NOZZLE | 5 | |
| 856A1098P01 | ADAPTER, TORQUE WRENCH - HPT NOZZLE (ADAPTER) | 1 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1865G04 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT | 5 | |
| 856A2390G01 | WRENCH, TORQUE - NO. 3 TO 4 LPT DISK (TORQUE WRENCH) | 3 | |
| 856A2391G01 | WRENCH, TORQUE - NO. 4 TO 5 LPT DISK (TORQUE WRENCH) | 2 | |
| 856A3269 | WRENCH - NO. 5 BEARING INNER RACE (WRENCH) | 1 | |
| 856A3269G01 | WRENCH-NO.5 BEARING INNER | 1 | |
| 856A3269G03 | Wrench - No. 5 Bearing Inner Race (wrench) | 9 | |
| 856A3492 | WRENCH-COUNTERTORQUE NO 5 BEARING NIPPLE LINE | 1 | |
| 856A3492G03 | WRENCH-COUNTERTORQUE NO 5 BEARING NIPPLE LINE | 6 | |
| 856A3492G04 | WRENCH - NIPPLE LINE, NO. 5 BEARING SUPPORT | 7 | |
| 856A3492G05 | WRENCH-COUNTERTORQUE NO 5 BEARING NIPPLE LINE | 7 | |
| 856A3492G06 | WRENCH- NIPPLE LINE, NO. 5 BEARING SUPPORT POST C | 8 | |
| 856A3572G01 | WRENCH - NO.1 BEARING INNER RACE NUT | 11 | |
| 856AI042 | WRENCH, TORQUE - NO 4 BRG RETAINER | 1 | |
| 885871 | NO.10 LONG TAP WRENCH M3-M6 X 250MM | 1 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 8MIT65B01221-1 | WRENCH - RESTRICTOR SUPPORT TUBE ASSEMBLY, NOSE LANDING GEAR | 2 | |
| 8MIT65B01221-4 | ADAPTER WRENCH - NUT, RESTRICTOR TUBE, NOSE LANDING GEAR | 1 | |
| 956A7627 | TORQUE WRENCH - NO.5 BEARING NUT | 1 | |
| 96500901 | 714/1-MANOSKOP TORQUE WRENCH 1-10Nm | 1 | |
| 96500902 | 714/2-MANOSKOP TORQUE WRENCH 2-20Nm | 1 | |
| 96500904 | 714/4-MANOSKOP TORQUE WRENCH 4-40Nm | 1 | |
| 96500906 | 714/6-MANOSKOP TORQUE WRENCH 6-60Nm | 1 | |
| 96500910 | 714/10-MANOSKOP TRQ WRENCH 10-100Nm | 1 | |
| 96500920 | 714/20-MANOSKOP TRQ WRENCH 20-200Nm | 1 | |
| 96500940 | 714/40-MANOSKOP TRQ WRENCH 40-400Nm | 1 | |
| 96502001 | 721NF/100-MANOSKOP TORQUE WRENCH 200-1000N-m (3/4" SQDR) | 1 | |
| 96504602 | 701/2 NO BATTERY-1-20Nm T/WRENCH NO BATTERY | 1 | |
| 96650-040042 | NORELEM Hook Wrench w/Lug 40-42mm | 1 | |
| 9C2330 | WRENCH, I/R - NO 1 BEARING NUT | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| A125-1006 | 8” NON-SPARKING ADJUSTABLE WRENCH | 1 | |
| A135A-1008 | 7/16” NON-SPARKING COMBINATION WRENCH | 1 | |
| A135A-1012 | 9/16” NON-SPARKING COMBINATION WRENCH | 1 | |
| A135A-1016 | 5/8” NON-SPARKING COMBINATION WRENCH | 1 | |
| A135A-1018 | 11/16” NON-SPARKING COMBINATION WRENCH | 1 | |
| A135A-1020 | 3/4” NON-SPARKING COMBINATION WRENCH | 1 | |
| A26007-1 | PLUG EQUIPMENT - DISCHARGE NOZZLE, CARGO COMPT FIRE EXTINGUISHER SUPPLY SOURCE - PNEUMATIC WRENCH - TORQUE, 0 TO 500 IN-LBS (0 TO 56.49 N·M) | 6 | |
| A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| A32025-1 | WRENCH ADAPTER - WHEEL RETAINING AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 8 | |
| A32035-1 | WRENCH - STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 17 | |
| A32053-1 | SPANNER WRENCH - RETAINING NUT, STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 1 | |
| A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
| AB20001-N2P | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| AB20001-N2Z | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| AB20001-N3F | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| AB20001-N3G | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| AB20001-N3J | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| AB20001-N3Q | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| AQC-N1418110 | TORQUE WRENCH WITH PLUG FOR REPLACEABLE NOZZLES (20 - 110 NM) | 1 | |
| B32034-1 | WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE ACTUATOR, LOCK RING, NOSE LANDING GEAR (NLG) | 1 | |
| B32067 | WRENCH ADAPTER -0 NOSE WHEEL STEERING TILLER | 1 | |
| B32067-1 | WRENCH ADAPTER - NOSE WHEEL STEERING TILLER HANDLE | 4 | |
| BE125-1010 | NON-SPARKING ADJUSTABLEWRENCH 10" | 1 | |
| C32025-1 | Spanner Wrench - Gland Nut, Nose Landing Gear | 9 | |
| C32025-7 | Spanner Wrench - Gland Nut, Nose Landing Gear | 22 | |
| C32040-1 | Spanner Wrench - Nose Landing Gear Steering Collar Retainer | 8 | |
| C32040-6 | Spanner Wrench - Nose Landing Gear Steering Collar Retainer | 22 | |
| C320401 | SPANNER WRENCH - NOSE LANDING GEAR STEERING COLLAR RETAINER | 8 | |
| C32043-1 | Wrench -Retaining Nut. Nose Landing Gear Steering Valve | 11 | |
| C32043-1-AZL | WRENCH - RETAINING NUT, NOSE LANDING GEAR STEERING VALVE | 1 | |
| C71001-1 | WRENCH-AFT CONE BOLT NUTSELL STOCK, NO QUOTE AFTER STOCK SOLD MAR 21 | 10 | |
| C71022-6 | Torque wrench-engine mount,TQFR250E,jednostranný | 17 | |
| CCM50I | WRENCH,TORQUE;?M;10.0 INCH-POUNDS MIN AND 50.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;|9.000";1.00 INCH-POUNDS;HEAD IS NOT INCLUDED,NO HARD CASE IS SUPPLIED;INCLUDES RUBBER GRIP HANDLE; CHROMIUM;PROFESS | 1 | |
| EMB-00053-001 | WRENCH-RECONNECT,AILERON/ELENO | 12 | |
| F70312-25 | TORQUE WRENCH ADAPTER CROW-FOOT 3.000（NOM'L）A/C FLATS | 2 | |
| F72759 | SPANNER WRENCH-NOSE GEAR | 5 | |
| F72762 | SPANNER WRENCH -0 NOSE GEAR USED TO LOOSEN AND | 6 | |
| F72763 | SPANNER WRENCH -0 NOSE GEAR STRUT ORIFICE USED | 1 | |
| F72764 | SPANNER WRENCH -0 NOSE GEAR STRUT ORIFICE USED | 2 | |
| F72768 | SPANNER WRENCH ASSEMBLY -0 NOSE GEAR USED TO | 1 | |
| F72776 | WRENCH -0 NOSE GEAR ACTUATOR ROD END. USED TO | 1 | |
| F72959-4 | WRENCH - SPANNER, NOSE LANDING GEAR TRUNNION PIN RETAINER NUT | 7 | |
| F72959-40 | Wrench-Spanner, Nose Landing Gear Trunnion Pin Retainer Nut | 23 | |
| FADH704 | WRENCH; ADJUSTABLEFLANK DRIVE PLUSCLUSHION GRIP; SNAP-ON TECHNOLOGIES INC-USA; FADH704; 6 IN - 12 IN; 4 PCS/SET | 1 | |
| FADH704CO | WRENCH; ADJUSTABLEFLANK DRIVE PLUSCLUSHION GRIP; SNAP-ON TECHNOLOGIES INC-USA; FADH704; 6 IN - 12 IN; 4 PCS/SET | 1 | |
| FPS-001 | WRENCH-FUEL NOZZLE | 8 | |
| G27106-1 | SPANNER WRENCH - REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS | 3 | |
| G32043-1 | WRENCH KIT - NOSE LANDING GEAR | 5 | |
| GOES22B | WRENCH-COMB 11/16 OE NO.22 SPL | 1 | |
| GOES24B | WRENCH-COMB NO.24 SPLN 3/4 | 1 | |
| GS10679 | SOCKET WRENCH-SPEED GOVERNO SPUR AND SLEEVE ASSEMBLY | 1 | |
| GS18301-1 | TORQUE WRENCH - 175 FT-LB/230 NM - 1/2 DRIVE TOOL - RENOMMÉ A44076 | 9 | |
| GXDES1820ANP | WRENCH-BOX NO.18 AND 20 SPLINE | 1 | |
| HB1625 | WRENCH ASSEMBLY - NOSE WHEEL NUT | 1 | |
| IAE1F10015 | WRENCH, HYDRAULIC PACKAGE AH-2543TCLHT Dwg No.(537260032) | 1 | |
| J32085-76 | WRENCH KIT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 10 | |
| J32085-77 | WRENCH KIT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 9 | |
| J32085-87 | WRENCH KIT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 4 | |
| J32085-88 | WRENCH KIT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 4 | |
| K27069-1 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 7 | |
| K32022-1 | WRENCH - NOSE LANDING GEAR WHEEL RETENTION NUT | 18 | |
| K32028-1 | SPANNER WRENCH - GLAND NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR | 9 | |
| K32028-2 | SPANNER WRENCH - GLAND NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR | 12 | |
| K32032-1 | SPANNER WRENCH - STEERING NUT, NOSE LANDING GEAR | 10 | |
| MIT65B01471 | WRENCH - RESTRICTOR RETAINER PLATE, NOSE LANDING GEAR | 2 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B81276 | TORQUE WRENCH ADAPTER - NOSE LANDING GEAR | 1 | |
| NOR-15032 | NORBAR PRO 50 AUTOMOTIVE REVERSIBLE RATCHET TORQUE WRENCH 3/8" 90-440 | 1 | |
| NOR-15033 | NORBAR PRO 50 AUTOMOTIVE REVERSIBLE RATCHET TORQUE WRENCH 1/2" 90-440 | 1 | |
| OEX10B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 5/16X 146MM | 3 | |
| OEX12B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 3/8 X 165MM | 4 | |
| OEX14B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 7/16X 184MM | 4 | |
| OEX16B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 1/2 X 203MM | 4 | |
| OEX18B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 9/16X 222MM | 3 | |
| OEX20B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 5/8 X 241MM | 3 | |
| OEX24B | INCLINED COMBINATION WRENCH 15 GR NORM STEEL CR-V 3/4 X 279MM | 5 | |
| OEX32B | COMBINED WRENCH STD NORM STEEL CR-V 1 X 355MM | 4 | |
| OT 50 9280 | MANOEUVRE WRENCH - TOOL FOR SAFRAN ARRIEL 2E ENGINE | 1 | |
| OXR707A | SAE FLANK DRIVE® NON-REVERSIBLE RATCHETING COMBINATION WRENCH SET (3/8-3/4") | 1 | |
| PWA25128 | WRENCH - NO.3 BRG OUTER RACE NUT_[PWA25128] | 2 | |
| PWA25462 | WRENCH - NO.3 BRG INNER RACE RET NUT_[PWA25462] | 2 | |
| PWA26190 | WRENCH - ENG ASSY IMC NO.2 BRG SEAL_[PWA26190] | 2 | |
| PWA27614 | WRENCH - NO.2 BRG INNER RACE RETNG_[PWA27614] | 2 | |
| PWA32062 | WRENCH-BRG NO.5 NUT-HPT SHAFT | 3 | |
| PWA45023 | WRENCH - NO. 1 BRG INNER RACE RETAINING NUT | 2 | |
| PWA45023 REV NC | WRENCH - NO. 1 BRG INNER RACE RETAINING NUT | 1 | |
| PWA45030 | WRENCH NO.2 BEARING-NUT | 1 | |
| PWC40781 | ADAPTER, DYNO-TORQUE WRENCH | 4 | |
| PWC52294 | WRENCH, POST-SB7493/ POST-SB7526 FUEL NOZZLES | 1 | |
| QD1200 | TORQUE WRENCH NO 2 40-200 IN LB | 7 | |
| QD150 | TORQUE WRENCH NO 3 10-50 IN LB | 6 | |
| QD2100 | TORQUE WRENCH NO 1 200-100 IN LB | 6 | |
| SD12552-1 | WRENCH - NOSE WHEEL | 1 | |
| SD12553-1 | NOSE WHEEL WRENCH-STANDARD | 2 | |
| SL-90-374-7500 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL0 | 40-180 IN.LB NORBAR TORQ WRENCH TOOL | 1 | |
| SL2 | Torque Wrench 20-110 ft lb (nose wheels) | 2 | |
| SL90-303-1-1250 | WRENCHE - NOTCHED, TIGHTENING OF NUTS NSA5454 | 4 | |
| SL90-314-7500 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 24 | |
| SL90-315-.3750 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 18 | |
| SL90-315-.5625 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL90-315-1-0000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 6 | |
| SL90-315-1-2500 | WRENCH-NOTCHED | 5 | |
| SL90-315-1-3750 | WRENCH-NOTCHED | 1 | |
| SL90-315-1-5000 | WRENCH-NOTCHED | 2 | |
| SL90-315-1.0000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 6 | |
| SL90-315-3750 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 18 | |
| SL90-315-4375 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 12 | |
| SL90-315-5000 | WRENCH-NOTCHED,TIGHTENING OF NUTS NSA5454 | 10 | |
| SL90-315-5625 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL90-315-6250 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 12 | |
| SL90-315-7500 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL90-321-5000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 2 | |
| SL90-322-.5625 | WRENCH-NOTCHED, TIGHTENING OF NUTS | 23 | |
| SL90-322-4375 | WRENCH-NOTCHD NSA5454 | 1 | |
| SL90-322-5625 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 23 | |
| SL90-322-5626 | WRENCH- NOTCHED | 1 | |
| SL90-374-.6250 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL90-374-1-0000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 7 | |
| SL90-374-1-1250 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 5 | |
| SL90-374-1-2500 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 7 | |
| SL90-374-1-5625 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 4 | |
| SL90-374-1000 | WRENCH-NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| SL90-374-3750 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 9 | |
| SL90-374-4375 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 9 | |
| SL90-374-5000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 8 | |
| SL90-374-5625 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 3 | |
| SL90-374-6250 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL90-374-7500 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 15 | |
| SL90-374-8750 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 8 | |
| SL90-437-6250 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 5 | |
| SL90.322-1.0000 | WRENCH - NOTCHED, TIGHTENING OF NUTS NSA5454 | 1 | |
| SL903225625 | WRENCH-NOTCHED TIGHTENING | 23 | |
| SOSR11 | 11/32" SAE, #11 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 1 | |
| SOSR12 | 3/8" SAE, #12 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 1 | |
| SOSR8 | 1/4" SAE, #8 SPLINE, FLANK DRIVE® 0° OFFSET NON-REVERSIBLE RATCHETING COMBINATION WRENCH | 1 | |
| SOXR01FBRA | 8 PC 12-POINT SAE FLANK DRIVE PLUS 0° OFFSET NON-REVERSING RATCHETING COMBINATION WRENCH FOAM SET (1/4–11/16") | 1 | |
| SOXR8A | WRENCH OFFSET NON-REVERSING RATCHETING COMB | 1 | |
| SOXRM01FBRA | 11 PC 12-POINT METRIC FLANK DRIVE® PLUS 0° OFFSET NONREVERSING RATCHETING COMBINATION WRENCH SET WITH PRO-FI™ ORGANIZATION (6– 16 MM) | 1 | |
| SOXRM02FBRA | 6 PC 12-POINT METRIC FLANK DRIVE® PLUS 0° OFFSET NON-REVERSING RATCHETING COMBINATION WRENCH SET WITH PRO-FIT™ ORGANIZATION (17-24 MM) | 1 | |
| SPL-14429 | SPANNER WRENCH - REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS | 1 | |
| SPL-1867 | WRENCH - NOSE LANDING GEAR OLEO GLAND NUT | 1 | |
| SPL-20727 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 1 | |
| SPL-8461 | WRENCH - NOSE LANDING GEAR WHEEL RETENTION NUT | 1 | |
| SR19W4A | DRIVE WRENCH NON-LOCKED | 1 | |
| SR25W4A | DRIVE WRENCH NON-LOCKED | 2 | |
| SR31W4A | DRIVE WRENCH NON-LOCKED | 1 | |
| SR37W4A | DRIVE WRENCH NON-LOCKED | 2 | |
| ST-905-072 | SPANNER WRENCH, NOSE GEAR AXLE ST-905-072 | 2 | |
| ST2580-242 | TORQUE WRENCH ADAPTER -0 BOX-TYPE 4-120 (NOML) | 1 | |
| ST2580-243 | TORQUE WRENCH ADAPTER - BOX TYPE, 3.37 NOMINAL ACROSS FLATS | 4 | |
| ST2580-245 | TORQUE WRENCH ADAPTER CROW-FOOT 3.000（NOM'L）A/C FLATS | 4 | |
| SWE 86072 | WRENCH - SPLINE, NO. 60 PROPELLER SHAFT THRUST BEARING NUT | 1 | |
| T-BOERM21-1 | 21MM WRENCH BODY-NO COO MARK | 1 | |
| T-BOERM22-1 | 22MM WRENCH BODY-NO COO MARK | 1 | |
| T-BOERM24-1 | 24mm WRENCH BODY-NO COO MARK | 1 | |
| T101588 | WRENCH SET - COUPLING NOT USED (HP, EP) | 1 | |
| T158093-001 | ADAPTER - TORQUE WRENCH, NO BACK BRAKE | 1 | |
| T3524-003 | WRENCH - RAT ACTUATOR SOLENOID | 1 | |
| TER175 | TORQUE WRENCH - 175 ft-lb/230 Nm - 1/2 DRIVE TOOL - Renommé A44076 | 8 | |
| TG70 | WRENCH - STRAP (FOR ELECTRICAL CONNECTORS WITH 2.0" DIAMETER MAX; NOT RECOMMENDED FOR TORQUE VALUE OF 120 IN-LBS OR GREATER) | 13 | |
| TOOL132 | McFarlane TOOL132 Anodized Blue 12 thru 1 Push-Pull Control Wrench Set | 1 | |
| TOOL132-11-12 | McFarlane TOOL132-1112 Anodized Blue 1116 and 34 Push-Pull Control Wrench | 1 | |
| TOOL132-14-16 | McFarlane TOOL132-1416 Anodized Blue 78 and 1 Push-Pull Control Wrench | 1 | |
| TOOL132-8-9 | McFarlane TOOL132-89 Anodized Blue 12 and 916 Push-Pull Control Wrench | 1 | |
| UT819 | WRENCH-SPANNER,C-TYPE (10 NOTCHES , 1,520" DIA. 3/8" DRIVE) | 10 | |
| WR-2006907X101-1-1 | WRENCH ADAPTER - NOSE WHEEL STEERING | 1 | |
| WR2006600X101-1-1 | WRENCH, SPANNER - NOSE LANDING GEAR | 1 | |
| WR2006600X101-3-1 | WRENCH, SPANNER - NOSE LANDING GEAR | 2 | |
| YA391 | MULTIPLIER,TORQUE WRENCH;1200.0 FOOT-POUNDS MAX;1ST END 0.500" NOMINAL#2ND END 0.750";1ST END INTERNAL SQUARE#2ND END EXTERNAL SQUARE;6 TO 1; STEEL;GEARED;|20.000"; CHROMIUM; | 1 | |
| lC6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| lC6952 | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| WE-075651 | TORQUE WRENCH WITH PLUG FOR REPLACEABLE NOZZLES (0 - 17 NM) | 1 | |
| SL90-349-5000 | WRENCH,NOTCHED,USED TO INSTALL OF STA-LO | 3 | |
| SL90-350-5000 | WRENCH,NOTCHED,USED TO INSTALL OF STA-LO | 6 | |
| SL90-356-3750 | WRENCH,NOTCHED,USED TO EXTRACT OF STA-LO | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
