| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| HS 9458 | WRENCH , SPANNER | 3 | |
| PWC60142-100 | WRENCH , SPANNER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F71290-1 | Wrench - Spanner, Bearing Retainer Nut | 12 | |
| F71290-7 | Wrench - Spanner, Bearing Retainer Nut | 10 | |
| (CALIB) 6796529 | WRENCH-SPANNER, TURBINE REAR BEARING CAMP NUT (CALIBRATION) | 1 | |
| 11 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 008407 | "WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEAC | 1 | |
| 02314-0023-001 | WRENCH, SPANNER | 1 | |
| 0UT135 | SOCKET, WRENCH, FACE SPANNER | 3 | |
| 100-47825 | WRENCH, SPANNER | 1 | |
| 1025-921-1 | SPANNER WRENCH, DOOR SNUBBER ADJUSTMENT | 1 | |
| 109-3101-75-101 | WRENCH,SPANNER (FLIGHT CONTROL SERVO-ACTUATOR JOINT | 2 | |
| 117B | ADJ. PIN SPANNER WRENCH, L 9-3/4 IN. | 4 | |
| 125-120 | WRENCH, SPANNER | 1 | |
| 125-30 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 125-35 | WRENCH, SPANNER | 1 | |
| 125-35, | WRENCHES, ADJUSTABLE SPANNER | 1 | |
| 125-50 | WRENCH, SPANNER | 1 | |
| 125-80 | WRENCH, SPANNER | 1 | |
| 125A-.35 | WRENCH, SPANNER | 1 | |
| 125A.120 | WRENCH, SPANNER | 2 | |
| 125A.50 | WRENCH, SPANNER | 1 | |
| 125A.80 | WRENCH, SPANNER | 1 | |
| 17G130003-1 | WRENCH, SPANNER | 1 | |
| 196K8002 | WRENCH, SPANNER-ANTI-ICE DUCT SEAL NUT | 1 | |
| 196K8002 REV B | WRENCH, SPANNER-ANTI-ICE DUCT SEAL NUT | 1 | |
| 1C6344 | WRENCH,SPANNER | 1 | |
| 1C6344G01 | WRENCH,SPANNER | 1 | |
| 1C6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 | |
| 1C6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856 REV NC | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856G01 | Wrench, Spanner Nut, No.6 Bearing | 1 | |
| 1C6897 | WRENCH, SPANNER- RETAINING NUT, BEAR. 5 | 1 | |
| 1C6897 REV C | WRENCH, SPANNER- RETAINING NUT, BEAR. 5 | 1 | |
| 1C6897G02 | Wrench, Spanner Retaining Nut No.5 Bearing | 1 | |
| 1C6950 | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 1C6950 REV U | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 1C6950G05 | WRENCH, HORIZINTAL/VERTICAL HPT ROTOR NUT SPANNER | 1 | |
| 1C6952 | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| 1C6952 REV A | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| 1C6952G01 | WRENCH, SPANNER-OIL TUBE, HPT | 1 | |
| 1C6952P01 | Wrench, Spanner - Oil Tube High Pressure Turbine Rotor | 1 | |
| 1C8107 | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | 1 | |
| 1C8107 REV B | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | 1 | |
| 1R18674 | SPANNER, WRENCH | 1 | |
| 204-076-202-100B | WRENCH, SPANNER | 1 | |
| 20MIT65B01201-1 | SPANNER WRENCH - TORSION LINK NUT, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| 21C3012G002 | WRENCH, SPANNER | 1 | |
| 21C7001G01 | WRENCH, SPANNER | 1 | |
| 21C7060G01 | WRENCH, SPANNER | 1 | |
| 21C7060G02 | WRENCH, SPANNER | 1 | |
| 21C7384G01 | WRENCH, SPANNER | 1 | |
| 21C862G001 | WRENCH, SPANNER | 1 | |
| 2557806 | WRENCH, SPANNER, DISK RETAINER | 1 | |
| 269T9211-005 | Wrench Adapter Spanner, Lower Pulley FWD Nut | 2 | |
| 269T9211-5 | WRENCH ADAPTER SPANNER, LOWER PULLEY FWD NUT | 1 | |
| 2878925 | WRENCH, SPANNER | 1 | |
| 296445-1 | Adapter, Wrench Spanner (3IT) | 1 | |
| 2C14040G05 | WRENCH SPANNER ‐ COUPLING NUT, HPT ROTOR | 3 | |
| 2C14040G07 | WRENCH SPANNER ‐ COUPLING NUT, HPT ROTOR | 2 | |
| 2C14064G03TK | WRENCH, SPANNER NUT NO.4B AND NO.4R BEARING HOUSING | 1 | |
| 2C14637G01 | WRENCH, SPANNER NUT | 1 | |
| 2C14637G01TK | WRENCH, SPANNER NO.2 BEARING NUT, SEAL, GEAR | 1 | |
| 2C14647G01 | WRENCH, SPANNER NUT | 3 | |
| 2C14856G01 | WRENCH SET, SPANNER‐AIR | 6 | |
| 2C5192G01 | WRENCH, Nº 2 BEARING LOCKNUT SPANNER | 1 | |
| 2C5197 | WRENCH, SPANNER #7 BRG | 1 | |
| 2C5237G01 | WRENCH, HPT LOCKNUT SPANNER | 1 | |
| 2C5242G02 | WRENCH, NO. 1 BEARING LOCKNUT SPANNER | 1 | |
| 2C6001G01 | WRENCH, NO. 3R BEARING RACE SPANNER NUT | 1 | |
| 2C6001G01 | WRENCH, SPANNER NUT - NO. 3R B | 1 | |
| 2C6027 | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027 REV A | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027G01 | WRENCH, SPANNER-RETAINER NUT | 1 | |
| 2C6058 | WRENCH, SPANNER - OIL TUBE, BRG 5 | 1 | |
| 2C6058G04 | WRENCH, SPANNER - OIL TUBE, HPT ROTOR | 1 | |
| 2C6062G07 | WRENCH, SPANNER, HORIZONTAL - COUPLING NUT | 1 | |
| 2C6062G09 | WRENCH, SPANNER, HORIZONTAL - COUPLING NUT | 1 | |
| 2C6084G03 | WRENCH, SPANNER NUT, NO. 5 BEARING | 1 | |
| 2C6084G04 | CF6-50 - WRENCH, SPANNER - RETAINER NUT, NO.5 BEARING INNER RACE | 1 | |
| 2C6092 | WRENCH, SPANNER - PRESS. TUBE, HIGH PRESS. TURB. ROTOR | 1 | |
| 2C6092 REV F | WRENCH, SPANNER - PRESS. TUBE, HIGH PRESS. TURB. ROTOR | 1 | |
| 2C6128G01TK | WRENCH, SPANNER NUT, NO.2 BEARING | 1 | |
| 2C6265 | WRENCH, SPANNER NUT - NO.1 BRG | 1 | |
| 2C6265 REV G | WRENCH, SPANNER NUT - NO.I BRG | 1 | |
| 2C6265G02 | WRENCH,SPANNER NUT #1 BEARING | 3 | |
| 2C6341 | WRENCH,SPANNER | 1 | |
| 2C6341G01 | WRENCH,SPANNER | 3 | |
| 2C6352 | WRENCH SET, SPANNER - AIRTUBE NUTS | 3 | |
| 2C6352 REV W | WRENCH SET, SPANNER - AIR TUBE NUTS | 1 | |
| 2C6352G01 | WRENCH SET, SPANNER-AIRTUBE NUTS | 1 | |
| 2C6352G02 | WRENCH SET, SPANNER-AIRTUBE NUTS | 2 | |
| 2C6352G03 | WRENCH SET, SPANNER-AIRTUBE NUTS | 1 | |
| 2C6352G04 | WRENCH SET, SPANNER-AIRTUBE NUTS | 1 | |
| 2C6352G05 | WRENCH SET, SPANNER-AIRTUBE NUTS | 2 | |
| 2C6352G06 | WRENCH SET, SPANNER-AIRTUBE NUTS | 4 | |
| 2C6352G07 | WRENCH SET, SPANNER-AIRTUBE NUTS | 4 | |
| 2C6352G08 | WRENCH SET, SPANNER - EXTERNAL TUBE | 1 | |
| 2C6647 | WRENCH, SPANNER-COMPR. STATOR VANE SPACER | 1 | |
| 2C6647 REV NC | WRENCH, SPANNER-COMPR. STATOR VANE SPACER | 1 | |
| 2C6647G01 | WRENCH, SPANNER, COM | 4 | |
| 2C6805 | WRENCH, SPANNER NUT - NO. 3 BRG. | 1 | |
| 2C6805 REV C | WRENCH, SPANNER NUT - NO. 3 BRG. | 1 | |
| 2C6805G01 | WRENCH, SPANNER NUT-NO.3 BEARING | 1 | |
| 2C6805G02 | WRENCH, SPANNER NUT | 2 | |
| 2C6826 | WRENCH, SPANNER NUT - NO. 2 BRG, | 1 | |
| 2C6826G01 | WRENCH, SPANNER NUT | 1 | |
| 2C8605 | WRENCH, SPANNER NUT- NO. 3 BRG | 1 | |
| 2C90503P01 | WRENCH, TURNBUCKLE LOCKNUT SPANNER | 1 | |
| 2C91102G01 | ADAPTER, HPT ROTOR LOCKNUT SPANNER WRENCH | 1 | |
| 2ME65B00002 | WRENCH - SPANNER, SAFETY LANYARD, TIEDOWN LOCKS | 10 | |
| 2ME65B0002 | WRENCH-SPANNER, SAFETY LANYARD, TIE DCWNLOCKS | 1 | |
| 2MIT65B01503 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 2MIT65B82591 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| 304AHSK | SET,WRENCH,SPANNER,ADJUSTABLE HOOK | 2 | |
| 32402760-1 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 332A93-3232-01 | WRENCH,SPANNER | 1 | |
| 332A93-3501-00 | WRENCH,SPANNER | 1 | |
| 3402760-1 | WRENCHES,ADJUSTABLE SPANNER | 1 | |
| 3404077-1 | SPANNER WRENCH KIT, MLG | 1 | |
| 3575-1182-01 | SPANNER WRENCH, 3/8” | 1 | |
| 360A93-3220-20 | WRENCH,SPANNER | 1 | |
| 360A93-3220-20/PHP | WRENCH, SPANNER | 1 | |
| 360A93-3223-20 | WRENCH,SPANNER | 1 | |
| 360A93322320 | WRENCH,SPANNER | 1 | |
| 3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
| 406-240-012-101 | WRENCH, SPANNER | 1 | |
| 407-240-006-101 | WRENCH, SPANNER | 1 | |
| 412-240-003-101 | WRENCH, SPANNER | 2 | |
| 427-240-102-101 | WRENCH, SPANNER | 1 | |
| 46D7578 | SPANNER,WRENCH | 1 | |
| 490-028 | SPANNER WRENCH, HYDRAULIC CASTER CAP | 1 | |
| 4MIT65B82585 | WRENCH - SPANNER, NOSE LANDING GEAR RETRACT ACTUATOR | 3 | |
| 5163A43 | WRENCH, SPANNER: ADJUSTABLE,1-1/8 IN,8 IN LG, CR PLTD | 1 | |
| 5385A12 | WRENCH: SPANNER, ADJUSTABLE 15/16 IN,6 IN LG, CR PLTD TOOLS - HAND / POWER: FORGED STL | 1 | |
| 5385A16 | WRENCH: SPANNER, ADJUSTABLE 1-11/16IN, 15IN LG, CR PLTD | 1 | |
| 5MIT65B01502 | ADAPTER - WRENCH, SPANNER | 1 | |
| 611000GSE190 | WRENCH-SPANNER, BEARING | 1 | |
| 72513 | SPANNER WRENCH, STOP RING | 1 | |
| 73388 | SPANNER WRENCH, STOP RING | 1 | |
| 83220 | SPANNER WRENCH, STOP RING | 1 | |
| 83221 | SPANNER WRENCH, OUTER BEARING | 1 | |
| 490028 | SPANNER WRENCH,HYDRAULIC CASTER CAP | 1 | |
| 730826 | SPANNER WRENCH, INNER BEARING | 1 | |
| 730827 | SPANNER WRENCH, CENTER BEARING | 1 | |
| 733273 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 3 | |
| 872840 | SPANNER WRENCH, INNER STOP RING | 1 | |
| 872841 | SPANNER WRENCH, OUTER STOP RING | 1 | |
| 3402760 | WRENCHES, ADJUSTABLE SPANNER | 1 | |
| 6795586 | WRENCH SPANNER, COMPRESSOR REAR BEARIN RETAINIG NUT | 2 | |
| 6795597 | Wrench â Spanner, Torque-meter Shaft and Shaft Support Nuts | 4 | |
| 6796020 | WRENCH, SPANNER NUT, OIL PUMP DR. | 1 | |
| 6796074 | WRENCH, SPANNER END SLOT | 1 | |
| 6796136 | WRENCH, SPANNER | 3 | |
| 6796529 | Wrench-Spanner, Turbine Rear Bearing Camp Nut | 3 | |
| 6796530 | WRENCH, SPANNER - TURBINE TIE BOLT LOCK NUT | 3 | |
| 6796533 | WRENCH, SPANNER, TIE BOLT | 3 | |
| 6796537 | SOCKET,WRENCH,FACE SPANNER | 2 | |
| 6796735 | WRENCH, SPANNER, OIL SCREEN | 3 | |
| 6796748 | WRENCH, SPANNER - NOSE SCAVENGER OIL PUMP OIL SCREEN | 4 | |
| 6797385 | WRENCH, SPANNER, OIL SCREEN | 1 | |
| 6798047 | Wrench â Spanner, Oil Sump, Turbine, STOCK | 2 | |
| 6798131 | WRENCH - SPANNER, REDUCTION GEAR OIL PUMP PRESSURE ADJUSTING VALVE THREADED BUSHING | 2 | |
| 6798224 | WRENCH, SPANNER END SLOT | 2 | |
| 6799535 | WRENCH, END SLOT SPANNER NUT | 3 | |
| 6799536 | Wrench â Spanner, Prop Break Outer Member Assy Retaining Nut (Spline) | 2 | |
| 6799875 | WRENCH -SPANNER, REAR CARRIER BEARING RETAINER | 2 | |
| 6889893 | WRENCH – SPANNER, NUT POWER TURBINE | 2 | |
| 6893387 | WRENCH, SPANNER TORQUEMETER SHAFT NUT | 2 | |
| 23053591 | Wrench & Holder - Spanner, Front Bearing Retaining Nut | 1 | |
| 23068605 | Wrench – Spanner, PMA Rotor Nut | 2 | |
| 460007036 | ADAPTOR,SOCKET WRENCH,A-LINK NUT SPANNER | 9 | |
| 6MIT65B04002 | SPANNER, WRENCH | 12 | |
| 6SV-85847 | WRENCH, SPANNER | 2 | |
| 7-562173005-601 | SPANNER WRENCH, | 1 | |
| 703A93-0010-00 | WRENCH,SPANNER | 1 | |
| 703A93-0023-20 | SPECIAL WRENCH,SPANNER | 1 | |
| 7ME65-73761-1 | Mech. Equipment - Spanner Wrench, FWD Trunnion Brg (MLG) | 18 | |
| 810-2005 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-2007 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-2007-KVS | WRENCH - SPANNER, UNDERWATER LOCATOR BEACON | 9 | |
| 810-2007/KVS | WRENCH - SPANNER, UNDERWATER LOCATOR BEACON | 9 | |
| 810-2007KVS | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACO | 9 | |
| 810-205 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-305 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| 810-325 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 21 | |
| 810-345 | ULB BATTERY, SPANNER WRENCH | 1 | |
| 8353-52 | WRENCH, SPANNER, MLG RETRACTION | 1 | |
| 8353-53 | WRENCH, SPANNER, MLG RETRACTION | 1 | |
| 8547006 | WRENCH, SPANNER | 4 | |
| 81270000 | WRENCH, SPANNER FILL BOSS ADAPTER | 4 | |
| 856A-1022-G03 | WRENCH SET, SPANNER | 13 | |
| 856A-1022-P05 | Wrench, Spanner | 6 | |
| 856A-1022-P06 | Wrench, Spanner | 7 | |
| 856A1022 | WRENCH SET, SPANNER - AIR TUBE NUTS | 1 | |
| 856A1022 REV J | WRENCH SET, SPANNER | 1 | |
| 856A1022G03 | WRENCH SET,SPANNER AIR TUBE NUTS | 13 | |
| 856A1469P05 | WRENCH SET,SPANNER | 1 | |
| 856A1612 | WRENCH SET, SPANNER - AIRTUBE NUTS | 1 | |
| 856A1612 REV D | ADAPTER SET, SPANNER AIRTUBE NUTS ( 5 WRENCH SET) | 1 | |
| 856A1612G01 | WRENCH SET, SPANNER - AIRTUBE NUTS | 8 | |
| 856AI022 | WRENCH SET, SPANNER | 1 | |
| 9001-IA | ALTERNATOR DRIVE HUB SPANNER WRENCH, CONTINENTAL | 1 | |
| 919584-1 | WRENCH, DIAPHRAGM SPANNER | 1 | |
| 9441M49 | WRENCH, SPANNER TORQUE NUT | 1 | |
| 9441M49 REV B | WRENCH, SPANNER TORQUE NUT | 1 | |
| 9441M53 | WRENCH, SPANNER | 1 | |
| 9441M53 REV A | WRENCH, SPANNER | 1 | |
| 96SPL-12757-C-0041 | SPANNER WRENCH, TLG | 1 | |
| 97880825 | WRENCH:SPANNER, ADJUSTABLE IN,4 IN LG,CR ... | 1 | |
| 97880826 | WRENCH:SPANNER, ADJUSTABLE 15/16 IN,6 IN ... | 1 | |
| 9809800007 | TOOL, SPANNER WRENCH | 1 | |
| 98D27504119000 | WRENCH,SPANNER;|SPANNER FLAP ADJUSTMENT; | 18 | |
| 98F52308330000 | Spanner Wrench, Lampholder | 14 | |
| A27114-13 | SPANNER WRENCH, BEARING | 1 | |
| A27114-3 | Spanner wrench assy，brg | 1 | |
| A27114-9 | SPANNER WRENCH, RETAINER | 1 | |
| A28010-1 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 4 | |
| A28010-2 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 3 | |
| A28012-1 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 11 | |
| A28012-2 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 8 | |
| A28015-1 | WRENCH SPANNER, FUEL RECEPTABLE | 2 | |
| A32035-1 | WRENCH, SPANNER | 17 | |
| A32045-1 | Wrench,Spanner | 5 | |
| A32045-100 | Wrench,Spanner | 7 | |
| A32045-101 | Wrench,Spanner | 10 | |
| A32045-105 | WRENCH, SPANNER R/I NLG WHEEL RETENTION NUT TORQUE | 2 | |
| A32045-105 | WRENCH, SPANNER R/I NLG WHEEL RETENTION NUT TORQUE | 2 | |
| A32045-108 | Wrench,Spanner | 9 | |
| A32045-109 | Wrench,Spanner | 8 | |
| A32045-110 | WRENCH - SPANNER, MLG GLAND NUT | 10 | |
| A32045-111 | WRENCH, SPANNER, NLG | 8 | |
| A32045-112 | Wrench,Spanner | 6 | |
| A32045-114 | WRENCH, SPANNER R/I NLG WHEEL RETENTION NUT TORQUE | 18 | |
| A32045-12 | Wrench,Spanner | 11 | |
| A32045-121 | Wrench,Spanner | 1 | |
| A32045-123 | Wrench,Spanner | 3 | |
| A32045-125 | WRENCH, SPANNER | 1 | |
| A32045-14 | Wrench,Spanner | 1 | |
| A32045-19 | WRENCH, SPANNER | 15 | |
| A32045-2 | Wrench,Spanner | 2 | |
| A32045-20 | Wrench,Spanner | 1 | |
| A32045-23 | Wrench,Spanner | 1 | |
| A32045-24 | Wrench,Spanner | 5 | |
| A32045-25 | Wrench,Spanner | 5 | |
| A32045-26 | Wrench,Spanner | 1 | |
| A32045-3 | Wrench,Spanner | 1 | |
| A32045-34 | Wrench,Spanner | 11 | |
| A32045-37 | Wrench,Spanner | 3 | |
| A32045-38 | Wrench,Spanner | 4 | |
| A32045-40 | Wrench,Spanner | 1 | |
| A32045-45 | Wrench,Spanner | 5 | |
| A32045-46 | Wrench,Spanner | 3 | |
| A32045-48 | Wrench,Spanner | 6 | |
| A32045-53 | Wrench,Spanner | 1 | |
| A32045-54 | Wrench,Spanner | 1 | |
| A32045-57 | Wrench,Spanner | 1 | |
| A32045-58 | Wrench,Spanner | 1 | |
| A32045-62 | Wrench,Spanner | 1 | |
| A32045-64 | Wrench,Spanner | 1 | |
| A32045-65 | Wrench,Spanner | 4 | |
| A32045-66 | Wrench,Spanner | 1 | |
| A32045-70 | Wrench,Spanner | 1 | |
| A32045-75 | Wrench,Spanner | 2 | |
| A32045-76 | Wrench,Spanner | 1 | |
| A32045-77 | Wrench,Spanner | 1 | |
| A32045-78 | Wrench,Spanner | 2 | |
| A32045-79 | Wrench,Spanner | 1 | |
| A32045-8 | Wrench,Spanner | 1 | |
| A32045-83 | WRENCH, SPANNER | 10 | |
| A32045-85 | Wrench,Spanner | 11 | |
| A32045-87 | Wrench,Spanner | 7 | |
| A32045-88 | Wrench,Spanner | 1 | |
| A32045-90 | Wrench,Spanner | 1 | |
| A32045-91 | Wrench,Spanner | 6 | |
| A32045-92 | WRENCH - SPANNER, NLG GLAND NUT | 10 | |
| A32045-93 | Wrench,Spanner | 9 | |
| A32045-94 | Wrench,Spanner | 9 | |
| A32045-94 | WRENCH-SPANNER,MLG GLAND NUT | 9 | |
| A32053-1 | SPANNER WRENCH - RETAINING NUT, STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 1 | |
| A36004-15 | INSTALLATION EQUIPMENT - CF6-80C2B BALL JOINT, WRENCH-SPANNER | 6 | |
| A57006-1 | SPANNER WRENCH - SPECIAL NUT, INBOARD TRAILING EDGE MAIN FLAP | 1 | |
| AGE-10157 | WRENCH, DIODE SPANNER | 3 | |
| AGE-10372 | WRENCH ASSEMBLY, SPANNER | 3 | |
| AGE-10373 | WRENCH, SPANNER | 2 | |
| AGE-10374 | WRENCH ASSEMBLY, SPANNER | 3 | |
| AGE-11575 | WRENCH ASSEMBLY, SPANNER | 2 | |
| AGE-12964 | WRENCH ASSEMBLY, SPANNER | 3 | |
| AGE10157 | WRENCH, DIODE SPANNER | 3 | |
| AGE10161 | WRENCH ASSEMBLY, SPANNER | 1 | |
| AGE10372 | WRENCH ASSEMBLY, SPANNER | 3 | |
| AGE10373 | WRENCH, SPANNER | 2 | |
| AGE10374 | WRENCH ASSEMBLY, SPANNER | 3 | |
| AGE10800 | WRENCH ASSY, SPANNER | 2 | |
| AGE11575 | WRENCH ASSEMBLY, SPANNER | 2 | |
| AGE11637 | SPANNER, WRENCH | 2 | |
| AGE11671 | WRENCH, SPANNER | 1 | |
| AGE12780 | SPANNER,WRENCH | 1 | |
| AGE12805 | WRENCH, SPANNER | 2 | |
| AGE12964 | WRENCH ASSEMBLY, SPANNER | 3 | |
| AGE14059 | WRENCH, SPANNER ASSEMBLY | 2 | |
| AGE16844 | WRENCH, SPANNER | 2 | |
| AGEI0372 | WRENCH ASSEMBLY, SPANNER | 1 | |
| AGEI0373 | WRENCH, SPANNER | 1 | |
| AGEI0374 | WRENCH ASSEMBLY, SPANNER | 1 | |
| AGEI0I57 | WRENCH, DIODE SPANNER | 1 | |
| AHS301B | WRENCH, SPANNER, ADJ | 6 | |
| AHS307B | WRENCH, SPANNER, ADJ | 2 | |
| AN-8515 | Wrench, spanner | 2 | |
| AN8514 | WRENCH SPANNER, 3/8 INCH DRIVE SET | 1 | |
| AN8514-1 | WRENCH: SOCKET,SPANNER | 4 | |
| AN8514-4 | SPANNER, WRENCH | 1 | |
| AN8515 | WRENCH, SPANNER | 2 | |
| AN8515-1 | WRENCH SPANNER, 1/2 INCH | 2 | |
| AN8516-1 | SPANNER WRENCH, (3.5 TO 6 INCHES DIA) AN8516-2 | 1 | |
| APS357C | SPANNER, WRENCH | 1 | |
| AS32045-92 | WRENCH-SPANNER, NLG GLAND NUT_[AS32045-92] | 1 | |
| B-8515 | Wrench, spanner | 1 | |
| B362-04180A | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| B362-09111 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 5 | |
| B52023 | SPANNER WRENCH, HINGE NUT, #1, 2 & 4 DOORS | 1 | |
| B52023-1 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 5 | |
| B52023-2 | Spanner wrench，upr nut | 2 | |
| B52023-5 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 1 | |
| B52023-6 | Spanner wrench，lwr nut | 1 | |
| B52023-8 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 3 | |
| B54018-29 | Wrench /Spanner, Removal Installation Kit | 2 | |
| B78008-17 | SPANNER WRENCH - NUT, CYLINDER LOCKING ACTUATOR (B78008-17 INCLUDED IN B78008-19) | 6 | |
| BELZER NO 6Z | OPEN WRENCH, SPANNER 7/8-15-16" | 1 | |
| C27039-1 | Spanner Wrench - Hinge Bearing, Horizontal Stabilizer | 11 | |
| C27075-1 | Spanner Wrench - Brake Nut, Stabilizer Trim Actuator | 5 | |
| C27075-9 | SPANNER WRENCH - BRAKE NUT, STABILIZER TRIM ACTUATOR | 3 | |
| C28002-9 | WRENCH-SPANNER, FUEL SUMP DRAIN VALVE | 15 | |
| C32010-1 | Wrench - Spanner Hydraulic Actuator, MLG | 5 | |
| C32025-1 | Spanner Wrench - Gland Nut, Nose Landing Gear | 8 | |
| C32025-7 | Spanner Wrench - Gland Nut, Nose Landing Gear | 22 | |
| C32040-1 | WRENCH - SPANNER, STEERING COLLAR RETAINER, NOSE LANDING GEAR | 8 | |
| C32040-6 | WRENCH - SPANNER, ST | 22 | |
| C32062-1 | ADAPTER EQUIPMENT - WRENCH, HOOK SPANNER | 4 | |
| C54005-2 | Wrench, Spanner | 2 | |
| C54015-1 | WRENCH, SPANNER | 16 | |
| CA14065-001 | TOOL, HSTA SPANNER WRENCH/TORQUE ADAPTER | 4 | |
| COM-1619 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| COM-2543 | WRENCH - SPANNER, USED ON UNDERWATER LOCATOR BEACON | 1 | |
| CSRS603-3 | SPANNER WRENCH, 8-SPLINE, CURVED, #10 | 1 | |
| CSRS603-4 | SPANNER WRENCH, 8-SPLINE, CURVED, ¼” | 1 | |
| DAPT60-0115-00 | WRENCH, SPANNER | 10 | |
| DAPT60-0116-00 | WRENCH-SPANNER, RING NUT | 6 | |
| DAPT60-0400-00 | WRENCH-SPANNER, RING NUT | 7 | |
| DRT68032 | ADAPTOR,SOCKET WRENCH,A-LINK NUT SPANNER | 10 | |
| DRT68729 | Wrench,Spanner | 8 | |
| DRT68925 | Wrench,Spanner | 9 | |
| ESRS603-3 | SPANNER WRENCH, 8 SPLINE | 2 | |
| ESRS603-4 | SPANNER WRENCH, 8 SPLINE | 1 | |
| F66187 | WRENCH, SPANNER | 1 | |
| F70013 | WRENCH -0 HOOK SPANNER, 3 INCH DIAMETER USED TO | 1 | |
| F70085 | Wrench - Spanner, Bearing Retainer Nut | 22 | |
| F70107 | WRENCH -0 HOOK SPANNER, 9 INCH DIAMETER USED TO | 1 | |
| F70175-1 | Wrench adapter-face spanner，LUG | 1 | |
| F70257 | SPANNER WRENCH -0 JAM NUT, ACTUATOR USED TO | 1 | |
| F70312-15 | SPANNER WRENCH - PIVOT PIN NUT, WLG & BLG | 5 | |
| F70336 | WRENCH - SPANNER, MAIN ENTRY/GALLEY DOOR ASSIST HANDLE | 1 | |
| F70336-1 | Spanner Wrench - Assist Handle, Main Entry Door | 22 | |
| F70336-4 | SPANNER WRENCH-ASSIST HANDLE, | 5 | |
| F71189 | Wrench assembly-spanner，face pin 3.75 span | 1 | |
| F71207 | WRENCH -0 PIN SPANNER, SOCKET FOR INSTALLING AND | 1 | |
| F71228-500 | WRENCH - SPANNER, SPLINED | 11 | |
| F71289 | Wrench-spanner，bearing retainer nut | 1 | |
| F71290-1 | Wrench - Spanner, Bearing Retainer Nut | 12 | |
| F71290-1, -7 | WRENCH - SPANNER, BEARING RETAINER NUT | 1 | |
| F71290-10 | Wrench - Spanner, Bearing Retainer Nut | 3 | |
| F71290-2 | Wrench - Spanner, Bearing Retainer Nut | 2 | |
| F71290-7 | Wrench - Spanner, Bearing Retainer Nut | 10 | |
| F71290-7C | WRENCH-SPANNER,BEARING RETAINER NUT | 1 | |
| F71465 | WRENCH, SPANNER | 1 | |
| F72762 | Wrench-spanner lower gland nut，nose gear | 6 | |
| F72763-500 | Spanner wrench-upper seal retainer orifice rod，NLG | 3 | |
| F72764-500 | Spanner wrench-lower seal retainer，orifice rod NLG | 3 | |
| F72767 | WRENCH -0 SPANNER, GLAND NUT, MLG USED TO REMOVE | 2 | |
| F72767-3 | Wrench-spanner，gland nut，MLG | 8 | |
| F72768 | Wrench assy-spanner piston position instl，nose gear | 1 | |
| F72800-1 | Wrench-spanner gimbal nut，adjustment | 1 | |
| F72800-2 | Wrench-spanner gimbal nut，adjustment | 1 | |
| F72955-31 | SET - SPANNER WRENCH, A.N. SPANNER TYPE (-1 THRU -12 MADE TO OBSOLETE A.N. SPECS, -31 THRU -42 ARE IDENTI ICAL TO -1 TO (THE BOEING COMPANY) | 1 | |
| F72959 | SET - SPANNER WRENCH, A.N. SPANNER TYPE (-1 THRU -12 MADE TO OBSOLETE A.N. SPECS, -31 THRU -42 ARE IDENTI ICAL TO -1 TO (THE BOEING COMPANY) | 11 | |
| F72959-1 | Wrench spanner, 0,75-2,0 ( 1. of 12) | 8 | |
| F72959-2 | Wrench spanner, 0,75-2,0 ( 2.) | 3 | |
| F72959-33 | WRENCH, SPANNER | 10 | |
| F72959-35 | WRENCH, SPANNER | 12 | |
| F72959-4 | WRENCH - SPANNER, NOSE LANDING GEAR TRUNNION PIN RETAINER NUT | 7 | |
| F72959-40 | Wrench-Spanner, Nose Landing Gear Trunnion Pin Retainer Nut | 23 | |
| F72959-41 | WRENCH, SPANNER | 13 | |
| F72959-5 | Wrench spanner, 1,75-4,0 ( 5.) | 4 | |
| F72959-6 | Wrench spanner, 1,75-4,0 ( 6.) | 3 | |
| F72959-8 | Wrench spanner, 1,75-4,0 ( 8.) | 3 | |
| F72959-XX | SET - SPANNER WRENCH, AN STANDARD TYPE | 1 | |
| F73014 | SPANNER WRENCH-SIDE STRUT LOWER LINK, MAIN | 1 | |
| F73014-1 | Spanner wrench-side strut lower link，main landing gear | 3 | |
| F80018-1 | SPANNER WRENCH, FWD TRUN BRNG | 17 | |
| F80018-2 | Spanner Wrench - Forward Trunnion Bearing Nut, Main Gear | 11 | |
| F80018-3 | SPANNER WRENCH - FWD TRUNNION BEARING NUT, | 1 | |
| F80032-1 | Wrench Adapter - Face Spanner Lug, MLG | 7 | |
| F80033 | ADAPTER ASSY-WRENCH,HOOK SPANNER | 1 | |
| F80033-1 | Adapter Assembly - Wrench, Hook Spanner | 22 | |
| F80033-1GMI | WRENCH, HOOK SPANNER (SPECIAL) | 1 | |
| F80033-8 | Adapter Assembly - Wrench, Hook Spanner | 23 | |
| F80051-1 | Wrench adapter-face spanner，LUG | 1 | |
| F80053-1 | Wrench Assembly - Face Spanner, Lug | 12 | |
| F80106-1 | WRENCH, LUG SPANNER-- F80106-1 | 6 | |
| F80106-2 | WRENCH, LUG SPANNER-- F80106-2 | 7 | |
| F80253-1 | SPANNER WRENCH - HINGE BEARING, HORIZONTAL STABILIZER | 2 | |
| FA-117.B | ADJ. PIN SPANNER WRENCH, L 9-3/4 IN. | 1 | |
| G20015-1 | WRENCH - SPANNER, SAFETY LANYARD, TIE DOWN LOCKS | 6 | |
| G27106-1 | SPANNER WRENCH - REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS | 3 | |
| G52007 | WRENCH -0 SPANNER, AIRSTAIR DAMPER NUT | 1 | |
| GGFS63102 | WRENCH,OIL FILTER;|FILTER SPANNER 3 LUG TYPE; | 1 | |
| GGG-W-665 | WRENCH, SPANNER, CARGO HOOK | 2 | |
| GS11838 | WRENCH, SPANNER | 1 | |
| GS13090-1 | WRENCH, SPANNER | 1 | |
| GS19642-1 | WRENCH, SPANNER | 2 | |
| GS19847-1 | SPANNER WRENCH, BALLSCREW | 1 | |
| GS20232-1 | WRENCH, SPANNER PC ACCESS | 1 | |
| GS21192-1 | KIT, BRAKE SPANNER WRENCHES | 1 | |
| GS21252-1 | WRENCH, FEATHER VALVE SPANNER | 1 | |
| GS23426-1 | WRENCH,SPANNER | 3 | |
| GS24431-1 | WRENCH, SPANNER – A/C PACK. WATER EXTRACTER | 2 | |
| GSE 079 | ADJUSTABLEWRENCH,HOOKSPANNERGSE079 | 1 | |
| HS 7581 | WRENCH, SPANNER | 2 | |
| HS 7967 | WRENCH, SPANNER - DOME RETAINING NUT | 3 | |
| HS 9458 | WRENCH, SPANNER | 3 | |
| HS7564 | WRENCH, SPANNER | 2 | |
| HS7579 | WRENCH, SPANNER, PROP PITCHLOCK REG | 2 | |
| HS7581 | WRENCH, SPANNER | 2 | |
| HS7584 | WRENCH, SPANNER | 2 | |
| HS7585 | WRENCH, SPANNER | 1 | |
| HS7591 | WRENCH, SPANNER | 1 | |
| HS7595 | WRENCH, SPANNER | 1 | |
| HS7610 | WRENCH, SPANNER | 2 | |
| HS7611 | WRENCH, SPANNER | 2 | |
| HS7966 | WRENCH-SPANNER, DOME RETAINING NUT | 1 | |
| HS7967 | WRENCH, SPANNER DOME RETAINING NUT | 3 | |
| HS8457 | WRENCH, SPANNER | 1 | |
| HS9447 | WRENCH, SPANNER | 1 | |
| HS9457 | WRENCH, SPANNER | 6 | |
| HS9458 | WRENCH, SPANNER | 3 | |
| HS9459 | WRENCH, SPANNER | 1 | |
| HS9514 | WRENCH,SPANNER | 1 | |
| HS9950 | WRENCH-SPANNER, SERVO NUT | 1 | |
| HU26895 | WRENCH-SPANNER , C-TYPE - RB211-535 ENGINES | 7 | |
| IAE1J12260 | WRENCH, SPANNER | 3 | |
| IAE1J12335 | WRENCH, SPANNER | 1 | |
| IAE1J12339 | WRENCH, SPANNER LHT Dwg No.(537230217) | 1 | |
| IAE1J12346 | WRENCH, SPANNER | 1 | |
| IAE1J12353 | WRENCH, SPANNER | 1 | |
| IAE1J12355 | WRENCH,SPANNER | 1 | |
| IAE1J12366 | WRENCH, SPANNER | 1 | |
| IAE1N20033 | WRENCH SPANNER, ANTI | 1 | |
| IAE1R18635 | SPANNER, WRENCH LHT Dwg No.(537230134) | 1 | |
| J20010-1 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-2 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-3 | WRENCH - SPANNER, BEARING RETAINER NUT | 3 | |
| J20010-4 | Wrench - Spanner, Bearing Retainer Nut | 3 | |
| J20010-5 | WRENCH - SPANNER, BEARING RETAINER NUT | 3 | |
| J20010-6 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-7 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J20010-8 | WRENCH - SPANNER, BEARING RETAINER NUT | 2 | |
| J27074 | SPANNER WRENCH-TORQUE TUBE,INBOARD MAIN FLAP | 1 | |
| J27074-1 | SPANNER WRENCH - TORQUE TUBE, INBOARD MAIN FLAP | 10 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J32055-86 | Spanner wrench assy，brg | 1 | |
| J32059-1 | SPANNER WRENCH AND SOCKET - ROD GLAND NUT AND BOLT, MAIN LANDING GEAR ACTUATORS | 1 | |
| J32059-7 | SPANNER WRENCH AND SOCKET - ROD GLAND NUT AND BOLT, MAIN LANDING GEAR ACTUATORS | 1 | |
| J52040-1 | SPANNER WRENCH - LIFT LINK RETAINER NUT, MAIN DECK CARGO DOOR | 1 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL STAND SHAFT ASSEMBLY | 5 | |
| K-4637 | WRENCH: SPANNER, | 1 | |
| K28001-1 | Wrench - Spanner, Fuel Sump Drain Valve | 9 | |
| K32008-131 | B787 MLG WRENCH KIT (WRENCHS, SOCKETS, SPANNERS AND THREAD PROTECTORS) | 8 | |
| K32008-132 | B787 MLG WRENCH KIT (WRENCHS, SOCKETS, SPANNERS AND THREAD PROTECTORS) | 8 | |
| K32028 | SPANNER WRENCH-GLAND NUT,MLG AND NLG | 1 | |
| K32028-1 | SPANNER WRENCH - GLAND NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR | 9 | |
| K32028-1 | SPANNER WRENCH-GLAND NUT,MLGAND NLG | 9 | |
| K32028-2 | SPANNER WRENCH - GLAND NUT, MAIN LANDING GEAR AND NOSE LANDING GEAR | 12 | |
| K32028-2 | SPANNER WRENCH-GLAND NUT,MLGAND NLG | 12 | |
| K32032-1 | SPANNER WRENCH - STEERING NUT, NOSE LANDING GEAR | 10 | |
| K32032-2 | Spanner wrench-steering nut，nlg | 2 | |
| LTCT1024 | Wrench, Spanner | 1 | |
| LTCT107 | WRENCH, SPANNER | 1 | |
| LTCT1109 | SOCKET, WRENCH, FACE SPANNER | 1 | |
| LTCT13931-01 | Wrench, Spanner | 1 | |
| LTCT2133 | SOCKET,WRENCH,FACE SPANNER | 1 | |
| LTCT3005 | SOCKET,WRENCH,FACE SPANNER | 1 | |
| LTCT3009 | SOCKET,WRENCH,FACE SPANNER | 2 | |
| LTCT4190 | SOCKET,WRENCH,FACE SPANNER | 1 | |
| LTCT487 | SOCKET, WRENCH, FASE SPANNER | 1 | |
| LTCT5331 | Wrench, Spanner | 1 | |
| LTCT5435 | Wrench, Spanner | 1 | |
| LTCT5675 | Wrench, Spanner Nut | 1 | |
| LTCT6707 | Body, Spanner Wrench | 1 | |
| LTCT7106 | Wrench, spanner | 1 | |
| LTCT915 | SOCKET, WRENCH, FACE SPANNER, COPPER ALLOY | 2 | |
| MBEU34491 | WRENCH,SPANNER | 1 | |
| MBEU52239 | WRENCH,SPANNER-SPANNER COLLAR NUT | 1 | |
| MBEU74273 | WRENCH, SPANNER | 1 | |
| MIT65B01202-1 | SPANNER/WRENCH, L/G WHEEL NUT | 10 | |
| MIT65B08803-1 | SPANNER WRENCH - RETAINING NUT, BUNGEE ASSEMBLY, WING LANDING GEAR | 1 | |
| MIT65BO1201 | SPANNER WRENCH - PIVOT PIN NUT, WLG & BLG | 7 | |
| MSE-43 | WRENCH - SPANNER, FAN REVERSER, SPL-6630 | 3 | |
| OUT134 | SOCKET, WRENCH, FACE SPANNER | 1 | |
| PU-50326 | WRENCH, SPANNER | 1 | |
| PWA50699 | WRENCH, SPANNER | 1 | |
| PWA50971 | WRENCH, SPANNER | 1 | |
| PWC60142-100 | Wrench, Spanner | 1 | |
| PWC60142-200 | WRENCH,SPANNER,HARNESSCONNECTOR | 2 | |
| RB AN8514-1-6 | Arm, Adjustable Spanner Wrench | 1 | |
| RB AN8514-1-7 | Arm, Adjustable Spanner Wrench | 1 | |
| RB T101392 | SOCKET,WRENCH,FACE SPANNER | 2 | |
| RB T101590 | Wrench, Face Spanner | 1 | |
| RB6795586 | WRENCH SPANNER, COMPRESSOR REAR BEARIN RETAINIG NUT | 2 | |
| RB6893387 | Wrench, Spanner Torquemeter Shaft Nut | 2 | |
| RBT400261 | Wrench, Spanner | 1 | |
| RSE-1060-1 | Wrench, Spanner - Anti-Ice Duct | 1 | |
| RSE1014 | WRENCH SPANNER - ANTI-ICING (A I) SEAL NUT , TORQUING | 2 | |
| RSE1014 REV A | WRENCH, SPANNER - ANTI-INE DUCT SEAL NUT | 1 | |
| RSE1031 | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSE1031 REV B | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSE1060 | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 6 | |
| RSE1060 REV NC | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSE1071 | WRENCH SET, SPANNER-ANTI-ICE DUCT (SET) | 12 | |
| RSE1071 REV NC | WRENCH SET, SPANNER-ANTI-ICE DUCT (SET) | 1 | |
| RSE1098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 20 | |
| RSE1098 REV B | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RSE1098-1 | WRENCH,SPANNER AFTENGINE MOUNT NUTS | 11 | |
| RSE1098-5 | Spanner wrench, CFM56-5, 38mm*6 fog/1/2" | 7 | |
| RSE1147 | WRENCH, SPANNER, INLET | 11 | |
| RSE1147 REV A | WRENCH, SPANNER, INLET | 1 | |
| RSE1202 | WRENCH, SPANNER | 11 | |
| RSE1243 | WRENCH, SPANNER | 3 | |
| RSE1243 REV NC | WRENCH, SPANNER | 1 | |
| RSEI03I | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSEI060 | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSEI07I | WRENCH SET, SPANNER-ANTI-ICE DUCT (SET) | 1 | |
| RSEI098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RSEI0I4 | WRENCH, SPANNER - ANTI-INE DUCT SEAL NUT | 1 | |
| RTTC08255 | WRENCH,SPANNER | 1 | |
| SPL-10484 | WRENCH - SPANNER, C-TYPE - RB211-535 ENGINES | 1 | |
| SPL-10997 | ADAPTER ASSY - WRENCH, HOOK SPANNER | 1 | |
| SPL-14429 | SPANNER WRENCH - REMOVAL/INSTALLATION, CANOE FAIRING AERO PLUGS | 1 | |
| SPL-1775 | WRENCH - SPANNER, FUEL SUMP DRAIN VALVE | 1 | |
| SPL-2339 | WRENCH - SPANNER, C-TYPE | 1 | |
| SPL-5216 | SPANNER WRENCH - ASSIST HANDLE, MAIN ENTRY DOOR | 1 | |
| SPL-9349 | WRENCH-SPANNER, GLAND NUT | 1 | |
| SPL-9977 | MECH. EQUIPMENT - SPANNER WRENCH, FWD TRUNNION BRG (MLG) | 1 | |
| SRS603-10 | SPANNER WRENCH, 8-SPLINE, 5/8” | 1 | |
| SRS603-3 | SPANNER WRENCH, 8-SPLINE, #10 | 1 | |
| SRS603-4 | SPANNER WRENCH, 8-SPLINE, ¼” | 1 | |
| SRS603-5 | SPANNER WRENCH, 8-SPLINE, 5/16” | 1 | |
| SRS603-6 | SPANNER WRENCH, 8-SPLINE, 3/8” | 1 | |
| SRS603-7 | SPANNER WRENCH, 8-SPLINE, 7/16” | 1 | |
| SRS603-8 | SPANNER WRENCH, 8-SPLINE, ½” | 1 | |
| SRS603-9 | SPANNER WRENCH, 8-SPLINE, 9/16” | 1 | |
| ST-905-072 | SPANNER WRENCH, NOSE GEAR AXLE ST-905-072 | 2 | |
| ST2580-163A | WRENCH, SPANNER TYPE | 11 | |
| ST2580-267 | Wrench - Spanner, Adapter For BACN10RF Nuts. (See ST2580-267 Drawing For Correct Dash Number) | 15 | |
| ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-285-8 | STANDARD TOOL-SPANNER WRENCH,FACE TYPE | 1 | |
| ST2580-286-8 | STANDARD TOOL - SPANNER WRENCH, FACE TYPE | 6 | |
| ST2580-286-8-K | Standard tool spanner wrench，face type | 1 | |
| ST2580-302 | WRENCH - SPANNER, FUEL RECEPTACLE NUT, OVERWING | 12 | |
| ST2580-302, SPL5275 | WRENCH SPANNER, FUEL RECEPTABLE | 1 | |
| ST2580-341G-1 | SPANNER WRENCH, FUEL SUMP DRAIN VALVE | 2 | |
| ST2580-381 | WRENCH - SPANNER, FACE TYPE | 4 | |
| ST2580-381A | WRENCH - SPANNER, BEARING CAP, NLG DRAG BRACE | 2 | |
| ST2580-381A-15 | WRENCH, SPANNER, BEARING CAP | 2 | |
| ST2580-418 | Torque wrench-Spanner, Face type | 3 | |
| ST2580-422 | Spanner, Wrench | 5 | |
| ST2580-67 | WRENCH - SPANNER, COAXIAL CONNECTORS | 3 | |
| ST70230 | Wrench, Spanner | 3 | |
| T-00001 | WRENCH, SPANNER | 1 | |
| T-102 | WRENCH, SPANNER, UPLOCK CYLINDER, NLG | 3 | |
| T-446039 | Wrench, Spanner | 1 | |
| T101392 | SOCKET,WRENCH,FACE SPANNER | 1 | |
| T10144 | SOCKET, WRENCH, FACE SPANNER | 1 | |
| T101449 | SOCKET,WRENCH,FACE SPANNER | 2 | |
| T101590 | WRENCH, FACE SPANNER | 1 | |
| T101991 | WRENCH,SPANNER | 1 | |
| T204-076-202-100B | WRENCH, SPANNER | 1 | |
| T2595-5 | SPANNER WRENCH,USED TO REMOVE/INSTALL TH | 1 | |
| T458233 | Spanner, Nut Wrench | 1 | |
| T5-0497K | WRENCH - SPANNER, FUEL MEASURING STICK (KAISER ELECTROPRECISION) | 5 | |
| T5421 | WRENCH,SPANNER | 1 | |
| T90453 | SPANNER WRENCH, ORFICE RETAINER NUT | 1 | |
| TECHNO 5229 | TOOL GLAND NUT SPANNER WRENCH, G500, G600,G650 | 1 | |
| TN-550-440 | SMALL SPANNER WRENCH, TN550-440 | 1 | |
| TOOL KIT, CONTENTS SPANNER SET | TOOL KIT, CONTENTS SPANNER SET, SOCKET WRENCH, SCREW DRIVER | 1 | |
| UT630-2 | WRENCH - SPANNER, C-TYPE (0.625 IN. DIA) | 13 | |
| UT818 | WRENCH - SPANNER, C-TYPE | 12 | |
| UT819 | WRENCH-SPANNER,C-TYPE (10 NOTCHES , 1,520" DIA. 3/8" DRIVE) | 10 | |
| UT841-43 | WRENCH - SPANNER, C TYPE (8 POINT, 3/8 INCH DRIVE, 1.275 INCH) - RB211-535 ENGINES | 1 | |
| UT893 | WRENCH - SPANNER, C-TYPE (C-TYPE, 10 PT, 1/2" DRIVE, 2.025 DIA.) | 2 | |
| UT894 | WRENCH - SPANNER, C-TYPE 10PT, 1/2" DRIVE, 2.275 DIA | 10 | |
| W-271 | ADJUSTABLE C-SPANNER WRENCH 1 1/2" x 4" hose coupling, 2 1/2" to 6" dia., 12" O.A. | 2 | |
| WCS-33202 | WRENCH, SPANNER | 2 | |
| WCS-4948 | WRENCH, SPANNER | 1 | |
| WR-211 | WRENCH, SPANNER, SHOCK STRUT, MLG | 1 | |
| WR-212 | WRENCH, SPANNER, SHOCK STRUT, MAIN LANDING GEAR | 1 | |
| WR-215 | WRENCH, SPANNER, TORQUE STRUT, MAIN LANDING GEAR | 1 | |
| WR-216 | WRENCH, SPANNER, TORQUE STRUT, MAIN LANDING GEAR | 1 | |
| WR2006100X101-1-1 | WRENCH, SPANNER - LOWER MAIN LANDING | 1 | |
| WR2006600X101-1-1 | WRENCH, SPANNER - NOSE LANDING GEAR | 1 | |
| WR2006600X101-3-1 | WRENCH, SPANNER - NOSE LANDING GEAR | 2 | |
| WR211 | WRENCH,SPANNER | 1 | |
| WR212 | WRENCH, SPANNER, SHOCK STRUT, MLG | 1 | |
| WR213 | WRENCH, SPANNER, SHOCK STRUT, MAIN LANDING GEAR | 1 | |
| WR215 | WRENCH,SPANNER | 1 | |
| WR288 | WRENCH, SPANNER, NOSE LANDING GEAR | 1 | |
| WT-00848-2 | WRENCH, SPANNER, PLUG ASSEMBLY | 1 | |
| XW20509 | WRENCH, SPANNER | 1 | |
| Y065-002-000A | NSN 5120-14-576-8418/CAGE C F0554/ WRENCH, SPANNER | 1 | |
| lC6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 | |
| lC6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| lC6897 | WRENCH, SPANNER- RETAINING NUT, BEAR. 5 | 1 | |
| lC6950 | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| lC6952 | WRENCH, SPANNER - OIL TUBE NO.5 BRG. | 1 | |
| MBEU52239 | WRENCH,SPANNER | 1 | |
| MBEU74269 | WRENCH,SPANNER | 1 | |
| T2595-5 | SPANNER WRENCH,USED TO REMOVE/INSTALL TH | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
