| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A-2501-G01 | Wrench, Ratchet | 27 | |
| 856A2501G01 | WRENCH, RATCHET | 27 | |
| IAE1J12378 | WRENCH, RATCHET | 1 | |
| R1011C | WRENCH, RATCHET | 3 | |
| R1618C | WRENCH, RATCHET | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-11605 | WRENCH, RATCHET, 9X10MM | 1 | |
| 195-05 | WRENCH, TUBE RAPID ACTION RATCHET, 5/16 | 1 | |
| 195F14 | WRENCH,RATCHET | 2 | |
| 2C81156 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 2C81156G01 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 537100096 | SPECIAL RATCHET-WRENCH, 3/8 " | 1 | |
| 6064C | PROTO 6064C 3/8" (DRIVE FOOT POUND RATCHET HEAD TORQUE WRENCH, 40 FT LB - 200 FT LB) | 1 | |
| 6066C | STANLEY PROTO J6066C 3/8-INCH DRIVE RATCHETING HEAD MICROMETER TORQUE WRENCH, 200-1000-INCH POUND | 1 | |
| 856A1010 | WRENCH, RATCHET - COMPRESSOR ROTOR INTERNAL NUT | 1 | |
| 856A1010G01 | Wrench, Ratchet - C/R Internal Nut (ratchet wrench) | 7 | |
| 856A2310G02 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL (RATCHET WRENCH) | 10 | |
| 856A2310G03 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL (RATCHET WRENCH) | 1 | |
| 856A2501 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL | 5 | |
| 856A2501G01 | Wrench, Ratchet, Dual Purpose - VBV Manual Control (ratchet wrench) | 27 | |
| 9413M30 | WRENCH, RATCHETING BOX END SPLINE | 1 | |
| 99-8071-6000 | WRENCH, PROPELLER NUT RATCHET | 2 | |
| ATHR-TILT | WRENCH,RATCHET TILTING HEAD 1/4 DRIVE | 2 | |
| ATHR250 | HI-LOK & HI-LITE HAND RATCHET WRENCH, REVERSIBLE 1/4'' MALE SQUARE DRIVE WITH THROUGH HOLE FOR HEX KEY, REPLACES HI-SHEAR HLH101-21 OR HLH 101-250 | 2 | |
| BOER8 | WRENCH, RATCHETING B | 2 | |
| BOERF708A | Set, Wrench, Flex Head Ratcheting Box / Open End, Standard, 12° Offset, (8 pcs.) | 2 | |
| BT-A-0513 | Ratchet Wrench, 3/8" Drive | 2 | |
| BTWOS | WRENCH, BIT, RATCHET, REVERSIBLE, OFFSET, 15° | 2 | |
| BTWROS | WRENCH, BIT, RATCHET, REVERSIBLE, OFFSET, 15° | 2 | |
| BTWS | WRENCH, BIT, RATCHET, REVERSIBLE, FLAT | 2 | |
| BXOR1012 | WRENCH, RATCHETING B | 3 | |
| BXOR1416 | WRENCH, RATCHETING B | 2 | |
| F80254 | SPECIFICATION – WRENCH, BOX-END, RATCHET, AFT CONE BOLT | 1 | |
| F80257-1 | WRENCH, BOX END, RATCHET - AFT CONE BOLT | 9 | |
| F80275-1 | WRENCH, BOX END, RATCHET - AFT CONE BOLT | 1 | |
| GQT2R200NP | TORQUE WRENCH, ADJ. CLICK TYPE, U.S , FIXED RATCHET,40- 200IN IB,3/8 | 3 | |
| GQT3R250NP | TORQUE WRENCH, ADJ. CLICK TYPE, U.S., FIXED RATCHET, 50-250 FT-LB, 1/2" DRIVE | 1 | |
| IAE1J12378 | WRENCH, RATCHET LHT Dwg No.(537220076) | 1 | |
| J6062C | PROTO J6062C 1/4" DRIVE RATCHETING HEAD MICROMETER TORQUE WRENCH,40-200" POUND | 5 | |
| JHWRFW-28 | WRENCH,RATCHET | 1 | |
| JSCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 2 | |
| JSCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 2 | |
| JSCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 2 | |
| JSCV12 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 3/8 RIVERSIBLE) | 1 | |
| JSCV14 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 7/16”RIVERSIBLE) | 1 | |
| JSCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| JSCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| JSCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| JSCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| JSCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| JSCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| JSCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| JSCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| JSCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| MOIJSCV30 | WRENCH, COMBINATION, RATCHETIN | 1 | |
| NOR-11037 | WRENCH, TORQUE;1-4 RATCHET -ADJUSTABLE 1-20 | 1 | |
| PTR72 | WRENCH,RATCHET,PNEUMATIC | 1 | |
| QC1R200 | Torque Wrench, Adj. Click Type, U.S., Compact-Ratchet, 40-200 in. lb., 3/8" drive | 1 | |
| QC2R1000 | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 200-1000 in. lb., 3/8" drive | 1 | |
| QD1R200 | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 40-200 in. lb., 1/4" drive | 18 | |
| QD1R50 | Torque Wrench, Adj. Click-type, U.S., Fixed-Ratchet, 10-50 in. lb., 1/4" drive | 11 | |
| QD1RN6B | TORQUE WRENCH, ADJ. CLICK TYPE, NEWTON METER, FIXED-RATCHET, 12-60 DN•M, 1/4" DRIVE | 1 | |
| QD2R1000 | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 200-1000 in. lb., 3/8" drive | 16 | |
| QD2R1000A | TORQUE WRENCH, ADJ. CLICK TYPE, U.S., FIXED-RATCHET, 200-1000 IN. LB., 3/8" DRIVE | 7 | |
| QD2R200 | Torque Wrench, Adj. Click-type, U.S., Compact-Ratchet, 40-200 in. lb., 3/8" drive | 16 | |
| QD3R2500 | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 500-2500 in. lb., 1/2" drive | 8 | |
| QD4R400A | ¾” DRIVE TORQUE WRENCH, FIXED RATCHET, 75-400 FT. LBS. ALONG WITH RACHET SERVICE KIT | 3 | |
| QE2FR75 | TORQUE WRENCH, FLEX RATCHET, 5 TO 75 FT. LBS., 3/8" DRIVE | 1 | |
| QJR3209C | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 500-2500 in. lb., 1/2" drive | 1 | |
| R1011C | WRENCH, RATCHETING BOX | 3 | |
| R1012C | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 5/16"-3/8", 12-POINT | 1 | |
| R1214C | WRENCH, RATCHETING BOX | 4 | |
| R1618C | WRENCH, RATCHETING BOX | 5 | |
| R2022C | WRENCH, RATCHETING BOX | 4 | |
| R2426C | WRENCH, RATCHETING BOX | 2 | |
| R2428C | WRENCH, BOX, RATCHETING, 0° OFFSET, 12-POINT, 3/4"-7/8" (DOGBONE) | 2 | |
| R2830C | WRENCH, RATCHETING BOX | 2 | |
| R810C | WRENCH, RATCHETING BOX | 4 | |
| RB604C | SET, WRENCH, RATCHETING BOX 4 PCS. 3/8 TO 7/8 | 1 | |
| RBM1011A | WRENCH,RATCHET:10-11 MM SURFACE SZ | 1 | |
| RBM1011C | WRENCH,RATCHET:10-11 MM SURFACE SZ | 2 | |
| RBM1012C | WRENCH,RATCHET:174.6 MM NOM O/A LG | 1 | |
| RBM78A | WRENCH,RATCHET:7-8 MM SURFACE SZ | 1 | |
| RBM78C | WRENCH,RATCHET:7-8 MM SURFACE SZ | 2 | |
| RBM910A | WRENCH,RATCHET:9-10 MM SURFACE SZ | 1 | |
| RBM910C | WRENCH,RATCHET:9-10 MM SURFACE SZ | 1 | |
| RBYA605 | SET, WRENCH, RATCHET | 2 | |
| RBZ1214 | WRENCH, RATCHETING BOX, LATC | 3 | |
| RBZ1618 | WRENCH, RATCHETING BOX, LATC | 2 | |
| RBZ605 | SET, WRENCH, RATCHET | 3 | |
| RBZ810 | WRENCH, RATCHETING BOX, LATC | 3 | |
| RS40064 | RATCHETING 3 1/2" TAP WRENCH,1/16" - 1/4" | 2 | |
| RS40074 | RATCHETING TAP 4 1/4" WRENCH,1/4" - 1/2" | 2 | |
| RS40084 | RATCHETING 10" TAP WRENCH,1/16" - 1/4" | 1 | |
| RS40094 | RATCHETING 12" TAP WRENCH,1/4" - 1/2" | 1 | |
| RTB 607 | SNAP-ON - SET, WRENCH, RATCHETING BOX, T-HANDLE, 12-POINT (7 PCS.) (1/4 IN. TO 9/16 IN.) | 4 | |
| RTB607 | SET, WRENCH, RATCHET | 4 | |
| RYA1011 | WRENCH, RATCHETING BOX, 25° OFFSET, STANDARD LENGTH, 5/16IN-11/32IN, 12-POINT | 3 | |
| RYA1214 | WRENCH, RATCHETING B | 4 | |
| RYA1618 | WRENCH, RATCHETING B | 2 | |
| RYA810 | WRENCH, RATCHETING B | 3 | |
| SCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 1 | |
| SCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 1 | |
| SCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 1 | |
| SCV12 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 3/8 RIVERSIBLE) | 1 | |
| SCV14 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 7/16”RIVERSIBLE) | 1 | |
| SCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| SCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| SCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| SCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| SCV28 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 7/8) | 1 | |
| SCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| SCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| SCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| SCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| SHL80A | RATCHET WRENCH, ½ DRIVE | 1 | |
| STP SCV08 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/4) | 1 | |
| STP SCV09 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 9/32) | 1 | |
| STP SCV10 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/16) | 1 | |
| STP SCV12 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 3/8 RIVERSIBLE) | 1 | |
| STP SCV14 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 7/16”RIVERSIBLE) | 1 | |
| STP SCV16 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1/2) | 1 | |
| STP SCV20 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 5/8) | 1 | |
| STP SCV22 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 11/16) | 1 | |
| STP SCV24 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 3/4 ) | 1 | |
| STP SCV26 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 13/16) | 1 | |
| STP SCV28 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 7/8) | 1 | |
| STP SCV32 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1) | 1 | |
| STP SCV34 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/16) | 1 | |
| STP SCV36 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/8) | 1 | |
| STP SCV40 | RING RATCHET (WRENCH, RATCHET , COMB , SPLINE, 12 PT, 1-1/4) | 1 | |
| TDW1000 | WRENCH, RATCHETING, | 2 | |
| TE602FUAC | SNAP-ON TORQUE WRENCH, ADJ, CLIKC TYPE, FIXED-RATCHET, 0-600 FT/LBS., 1/2" DRIVE | 2 | |
| TECH2FR100 | TORQUE WRENCH, ELECTRONIC, FLEX RATCHET, 5 TO 100 FT. LBS., 3/8" DRIVE | 3 | |
| TECH2R100 | TORQUE WRENCH, ELECTRONIC, TECHWRENCH, FIXED HEAD RATCHET, 5 TO 100 FT. LBS., 3/8" DRIVE | 3 | |
| TECH4R600 | Torque Wrench, Digital, Flex Head Ratchet, 60 to 600 ft. lbs., 3/4 drive, Make : SNAP-ON | 3 | |
| TECH4RM600 | Torque Wrench, Electronics, Fixed Ratchet, 60 to 6 | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1 /4"-5/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 1/2"-9/16", 12-POINT | 1 | |
| WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | WRENCH, RATCHETING BOX, STANDARD LENGTH, 0° OFFSET, 3/8"-7/16", 12-POINT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
