| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2C6192G02 | WRENCH, NUT | 1 | |
| 360A93-3208-00 | WRENCH, NUT | 1 | |
| PWC30114-09 | WRENCH, NUT | 5 | |
| PWC30114-16 | WRENCH, NUT | 6 | |
| PWC30414 | WRENCH, NUT | 2 | |
| PWC31050 | WRENCH, NUT | 8 | |
| PWC41050 | WRENCH, NUT | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 07482-21C49P011 | WRENCH, PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| 07482-2C90503P01 | WRENCH, PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| 109-3101-22-1 | WRENCH, M/R HUB RING NUT BOLTS TIGHTEN | 1 | |
| 109-3130-26-1 | WRENCH,RING NUT REMOVAL/INSTALLATION | 1 | |
| 109-3130-32-1 | WRENCH, TR RETAINING NUT REM/INST. | 2 | |
| 109-3400-68-9 | AGUSTA TOOL - FREEWHEEL NUT REMOVE/INSTL - WRENCH, REMOVING | 1 | |
| 109-3501-10-101 | WRENCH, WHEEL BRAKE VALVE NUT | 1 | |
| 10C2060 | WRENCH, CVT AFT LOCKNUT | 1 | |
| 10C2060G02 | Wrench,cvt aft locknut | 1 | |
| 140069 | WRENCH, ANTI-FLAIL BEARING NUT, NGB | 1 | |
| 196-T0166-401 | WRENCH, RMV/INSTL STEERING NUT - NLG | 1 | |
| 196-T0178-401 | WRENCH, RMV/INSTL LOWER CAM NUT - NLG | 1 | |
| 196K8002 | WRENCH, SPANNER-ANTI-ICE DUCT SEAL NUT | 1 | |
| 196K8002 REV B | WRENCH, SPANNER-ANTI-ICE DUCT SEAL NUT | 1 | |
| 1C3569G02 | WRENCH, TORQUE-NUT, RETAINING, COMPRESSOR STATOR ACTUATION ARMS | 1 | |
| 1C6793G01 | WRENCH, TORQUE BREAK - VSV LOCKNUT | 1 | |
| 1C6794P01 | WRENCH, TORQUE - VSV LOCKNUT | 1 | |
| 1C6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 | |
| 1C6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856 REV NC | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| 1C6856G01 | Wrench, Spanner Nut, No.6 Bearing | 1 | |
| 1C6897 | WRENCH, SPANNER- RETAINING NUT, BEAR. 5 | 1 | |
| 1C6897 REV C | WRENCH, SPANNER- RETAINING NUT, BEAR. 5 | 1 | |
| 1C6897G02 | Wrench, Spanner Retaining Nut No.5 Bearing | 1 | |
| 1C6950 | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 1C6950 REV U | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 1C6950G05 | WRENCH, HORIZINTAL/VERTICAL HPT ROTOR NUT SPANNER | 1 | |
| 1C8076 | WRENCH, SPANNNER COUPLING NUT | 1 | |
| 1C8107 | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | 1 | |
| 1C8107 REV B | WRENCH, SPANNER-RTNR NUT, LP TURB AFT SHAFT | 1 | |
| 1C8173 | WRENCH, SEAL NUT | 1 | |
| 1C8173G01 | WRENCH, SEAL NUT | 1 | |
| 1C9031G01 | WRENCH, HAND - LPTR COUPLING NUT | 1 | |
| 1C9032G01 | WRENCH, COUPLING NUT - LPTR | 1 | |
| 1C9307G01 | Wrench,retainer nut-inner race No.6 bearing | 1 | |
| 1C9428G01 | Wrench, VSV Locknut Torque Break | 1 | |
| 1C9617G01 | WRENCH, LPTS COUPLING NUT | 1 | |
| 208AN | SNAP ON SET, WRENCH, CROWFOOT FLARE NUT, 12-POINT (8 PCS.) (5/8" TO 1 1/16") | 2 | |
| 20MIT65B01211-1 | ADAPTER WRENCH, NUT - WLG UPPER SHOCK STRUT | 1 | |
| 21C49P011 | WRENCH, PGB STRUT TURNBUCKLE LOCKNUT | 1 | |
| 21C8886G01 | WRENCH,LOCKNUT,HORIZONTAL | 1 | |
| 2561517 | Wrench, operating lever locknut | 2 | |
| 23052528 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 23053554 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23058410 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23068605 | WRENCH, POWER-UNIT ACCESSORY-DRIVE FORWARD-END ALTERNATOR-SHAFT-NUT | 2 | |
| 25Y237A | WRENCH,RETAINER NUT GLAND NLG | 6 | |
| 25Y239A | WRENCH,RETAINER NUT AXLE NLG | 6 | |
| 25Y249AB | WRENCH, MODULATOR (AXLE TO PLUNGER NUT) | 7 | |
| 25Y257 A | WRENCH, MAXARET RETAINING NUT | 6 | |
| 25Y257A | Wrench, Maxaret Retaining Nut | 6 | |
| 25Y613AB | WRENCH,RETAINER NUT GLAND SEAL | 4 | |
| 25Y613A\B | WRENCH,RETAINER NUT GLAND SEAL | 4 | |
| 25Y725A | Wrench, Wheel Retaining Nut | 6 | |
| 269A9228 | Wrench, Nut Main Rotor Thrust | 1 | |
| 269A9266 | Wrench, 269A4654 Nut Install (Transmission) | 1 | |
| 269T9307 | Wrench, 269A6258 Locknut Installation | 1 | |
| 287532-1-1 | WRENCH,TANG T/RFLEX DRIVE NUT BALL S | 1 | |
| 28753211 | WRENCH,TANG T/RFLEX DRIVE NUT BALL S | 1 | |
| 298104-1 | ADAPTER ASSY,TORQUE WRENCH,LPC NUT | 1 | |
| 2C14040 | WRENCH, PRESS. TUBE - COUPLING NUT, HP TURB. ROTOR | 1 | |
| 2C14040 REV M | WRENCH, PRESS. TUBE - COUPLING NUT, HP TURB. ROTOR | 1 | |
| 2C14040G05 | WRENCH, PRESS. TUBE-COUP.NUT HPTR | 3 | |
| 2C14040G06 | WRENCH, PRESSURE TUBE/COUPLING NUT-HP TURB ROTOR | 1 | |
| 2C14064G03TK | WRENCH, SPANNER NUT NO.4B AND NO.4R BEARING HOUSING | 1 | |
| 2C14092 | WRENCH, STARTER-LOW PRESSURE TURBINE NUT | 1 | |
| 2C14092 REV C | WRENCH, STARTER-LOW PRESSURE TURBINE NUT | 1 | |
| 2C14092G03 | WRENCH, STARTER LPT COUPLING NUT | 4 | |
| 2C14093 | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093 REV J | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093G03 | WRENCH, COUPLNG NUT | 6 | |
| 2C14093P09 | WRENCH,COUPLING NUT L.P.T | 1 | |
| 2C14637G01 | WRENCH, SPANNER NUT | 1 | |
| 2C14637G01TK | WRENCH, SPANNER NO.2 BEARING NUT, SEAL, GEAR | 1 | |
| 2C14637G02 | Wrench, spanner -no 2 brg nut, seal, gear | 1 | |
| 2C14647G01 | WRENCH, SPANNER NUT | 3 | |
| 2C14647G01R | WRENCH, RETAINING NUT NO. 6 BRG OUTER R | 1 | |
| 2C14650 | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14650 REV F | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14650G01 | WRENCH, RETAINER NUT- INNER RACE, # 6 BEARIING | 4 | |
| 2C14650G02 | WRENCH, RETAINER NUT - INNER RACE NO. 6 BEARING | 1 | |
| 2C14670G02 | WRENCH, 4R BEARING INNER RACE RETAINER NUT | 1 | |
| 2C14670G04 | WRENCH, 4R BEARING INNER RACE RETAINER NUT | 1 | |
| 2C5192G01 | WRENCH, Nº 2 BEARING LOCKNUT SPANNER | 1 | |
| 2C5237G01 | WRENCH, HPT LOCKNUT SPANNER | 1 | |
| 2C5242G02 | WRENCH, NO. 1 BEARING LOCKNUT SPANNER | 1 | |
| 2C5820G01 | WRENCH, HPT STAGES 1 AND 2 LOCKNUT TORQUE | 1 | |
| 2C6001G01 | Wrench,spanner nut-No 3 bearing race | 1 | |
| 2C6001G01 | WRENCH, SPANNER NUT - NO. 3R B | 1 | |
| 2C6027 | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027 REV A | WRENCH, SPANNER, RETAINER NUT - NO. 4 BALL BEARING | 1 | |
| 2C6027G01 | WRENCH, SPANNER-RETAINER NUT | 1 | |
| 2C6038G03 | WRENCH, COUPLING NUT - FAN SHAFT & AFT | 1 | |
| 2C6050 | WRENCH, NO. 4 BRG-SPLIT NUT COLLAR | 1 | |
| 2C6062G07 | WRENCH, SPANNER, HORIZONTAL - COUPLING NUT | 1 | |
| 2C6062G09 | WRENCH, SPANNER, HORIZONTAL - COUPLING NUT | 1 | |
| 2C6084G03 | WRENCH, SPANNER NUT, NO. 5 BEARING | 1 | |
| 2C6084G04 | CF6-50 - WRENCH, SPANNER - RETAINER NUT, NO.5 BEARING INNER RACE | 1 | |
| 2C6093G01 | Wrench,balance-coupling,nut hp turb rotor | 1 | |
| 2C6093G01 | WRENCH,BALANCE-COUPLING NUT. H | 1 | |
| 2C6128G01TK | WRENCH, SPANNER NUT, NO.2 BEARING | 1 | |
| 2C6173 | WRENCH, SEAL NUT - | 1 | |
| 2C6173G01 | WRENCH,SEAL NUT-COMPRESSOR RE | 1 | |
| 2C6265 | WRENCH, SPANNER NUT - NO.1 BRG | 1 | |
| 2C6265 REV G | WRENCH, SPANNER NUT - NO.I BRG | 1 | |
| 2C6265G02 | WRENCH,SPANNER NUT #1 BEARING | 3 | |
| 2C6352P16 | WRENCH, AIRTUBE NUT | 1 | |
| 2C6805 | WRENCH, SPANNER NUT - NO. 3 BRG. | 1 | |
| 2C6805 REV C | WRENCH, SPANNER NUT - NO. 3 BRG. | 1 | |
| 2C6805G01 | WRENCH, SPANNER NUT-NO.3 BEARING | 1 | |
| 2C6805G02 | WRENCH, SPANNER NUT | 2 | |
| 2C6806G01 | WRENCH, HPT ROTOR, LOCKNUT | 2 | |
| 2C6826 | WRENCH, SPANNER NUT - NO. 2 BRG, | 1 | |
| 2C6826G01 | WRENCH, SPANNER NUT | 1 | |
| 2C6833G05 | Wrench, Coupling Nut - Fan Maintenance Unit | 2 | |
| 2C6833G07 | WRENCH, COUPLING NUT (WRENCH) | 1 | |
| 2C6943G02 | WRENCH,SPLINE ADAPTER NUT,ASSEM HPC | 1 | |
| 2C6964 | WRENCH, TORQUE BREAKING-COMPR STR ACT ARM RTNG NUT | 1 | |
| 2C6964G04 | WRENCH, TORQUE BREAKING, COMPRESSOR STATOR ACTUATION ARM RETAINING NUT | 3 | |
| 2C6965 | WRENCH,TORQUE-NUT RETAINING CSV ACTUATING ARMS | 1 | |
| 2C6965 REV B | WRENCH, TORQUE - NUT RETAINING | 1 | |
| 2C6965P03 | WRENCH WRENCH, TORQUE LIMITING VSV NUT | 3 | |
| 2C81050G01 | WRENCH, NO. 5 BEARING LOCKNUT | 3 | |
| 2C81156 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 2C81156G01 | WRENCH, RATCHET LOCKNUT HPCR | 1 | |
| 2C8605 | WRENCH, SPANNER NUT- NO. 3 BRG | 1 | |
| 2C90503P01 | WRENCH, TURNBUCKLE LOCKNUT SPANNER | 1 | |
| 330A93-2042-20 | WRENCH,TRANSMITTER NUT | 1 | |
| 330A93-2043-00 | WRENCH,MRH NUT | 1 | |
| 3401379-1 | WRENCH, AXLE NUT RETAINING | 2 | |
| 3401379-3 | WRENCH, NUT RETAINING, NLG WHEEL | 2 | |
| 3464-4 | WRENCH, NUT, COMPRESSOR, EXTENSION | 2 | |
| 3464-5 | WRENCH, NUT, COMPRESSOR, EXTENSION | 1 | |
| 350A93320020 | WRENCH, FOR M.G.B. RETAINING NUT | 2 | |
| 360A93-3220-20 | WRENCH,MGB FAN NUT | 1 | |
| 360A93-3223 | WRENCH,MGB FAN NUT | 1 | |
| 360A93322020 | WRENCH,MGB FAN NUT | 1 | |
| 365A93-3362-20 | WRENCH,TRH ATTACHMENT NUT | 1 | |
| 365A93336220 | WRENCH, TRH ATTACHMENT NUT | 1 | |
| 3828 | WRENCH, FLARE NUT 7/8 | 1 | |
| 3855 | WRENCH, COMPRESSOR REAR BEARING NUT | 3 | |
| 3G6205G26551 | Wrench, M/R lowerscissor bearinglocknut rem/instl | 1 | |
| 3G6205G26631 | Wrench, MR scissor retaining nut rem/instl | 1 | |
| 412-240-003-101 | WRENCH, REFERENCE GEAR RETAINING NUT | 2 | |
| 412-240-027-101 | WRENCH, LOWER MAST BEARING NUT | 1 | |
| 427-240-106-101 | WRENCH, CLUTCH BEARING NUT | 1 | |
| 6795635 | WRENCH, TURBINE TIE BOLT NUT | 2 | |
| 6795644 | WRENCH, GP FRONT BEARING NUT | 2 | |
| 6795985 | WRENCH, PT SHAFT BEARING RETAINING NUT | 2 | |
| 6796019 | WRENCH, NUT, ACC. DR. SHAFT BRG. | 2 | |
| 6796020 | WRENCH, SPANNER NUT, OIL PUMP DR. | 1 | |
| 6796046 | WRENCH, PINION REAR BRG. NUT | 1 | |
| 6796059 | WRENCH, REDUCTION GEAR EYEBOLT NUT | 2 | |
| 6796136 | WRENCH, SAFETY COUPLING OUTER MEMBER RETAINING NUT | 3 | |
| 6796351 | SUPPORT - WRENCH, SAFETY COUPLING NUT | 2 | |
| 6796529 | WRENCH, SPANNER, TURBINE REAR BEARING CLAMP NUT | 3 | |
| 6796530 | WRENCH, SPANNER - TURBINE TIE BOLT LOCK NUT | 3 | |
| 6797100 | WRENCH, SAFETY COUPLING RETAINER NUT | 1 | |
| 6799535 | WRENCH, END SLOT SPANNER NUT | 3 | |
| 6799538 | WRENCH, BOX SPEED SENSITIVE SWITCH MOUNTING NUT | 2 | |
| 6799621 | WRENCH, NUT, TURBINE COUPLING CLAMP | 3 | |
| 6893387 | WRENCH, SPANNER TORQUEMETER SHAFT NUT | 2 | |
| 460007011 | WRENCH, AXLE NUT MLG | 27 | |
| 460007036 | ADAPTOR,SOCKET WRENCH,A-LINK NUT SPANNER | 9 | |
| 703A93-0010-00 | WRENCH, IGB TGB NUT | 1 | |
| 703A93-0020-20 | WRENCH, SHUR-LOCK M16 NUT | 1 | |
| 703A93-0020-20/PHP | WRENCH, SHUR-LOCK M16 NUT | 1 | |
| 703A93-0023-20 | WRENCH, FOR SHUR-LOK M20 NUT | 1 | |
| 703A93001000 | WRENCH,IGB TGB NUT | 1 | |
| 703A93002020 | WRENCH, FOR SHUR-LOK M16 NUT | 1 | |
| 800-A-669 | WRENCH, RECLINE TRAVEL ADJUSTMENT NUTS (1 1/4") | 1 | |
| 828485-1 | WRENCH, GLAND NUT | 1 | |
| 828486-1 | WRENCH, ORIFICE SUPPORT TUBE NUT | 1 | |
| 828490-101 | WRENCH, STEERING CYLINDER NUT | 1 | |
| 828492-1 | WRENCH, STEERING FRICTION NUT | 1 | |
| 828493-1 | WRENCH, GLAND NUT | 1 | |
| 853-100-113-0 | WRENCH,NUT-TURBINE TIE-ROD | 1 | |
| 8563392 | WRENCH, TORQUE – AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 1 | |
| 856A-1469-G01 | Wrench, Set of 5, MEC/FP Nuts | 21 | |
| 856A-1469-G02 | Wrench, Set of 3, MEC/FP Nuts | 15 | |
| 856A1000 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G09 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 7 | |
| 856A1000G08 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 3 | |
| 856A1000G09 | Wrench, Installation and Removal - No. 3 Bearing Locking Nut (wrench) | 7 | |
| 856A1006 | WRENCH, TORQUE ADAPTER - COMPRESSOR STATOR NUTS (TORQUE ADAPTER) | 1 | |
| 856A1006G01 | Wrench, Torque Adapter - Compressor Stator Nuts (torque adapter) | 11 | |
| 856A1010 | WRENCH, RATCHET - COMPRESSOR ROTOR INTERNAL NUT | 1 | |
| 856A1010G01 | Wrench, Ratchet - C/R Internal Nut (ratchet wrench) | 8 | |
| 856A1034 | WRENCH, 35 TOOTH BEVEL GEAR LOCKNUT | 1 | |
| 856A1034G01 | WRENCH, 35 TOOTH BEVEL GEAR LOCKNUT | 11 | |
| 856A1469G01 | WRENCH, SET OF 5, MEC/FP NUTS | 21 | |
| 856A1865G04 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT | 6 | |
| 856A2316 | WRENCH, TORQUE/LOOSEN LPT COUPLING NUT. | 1 | |
| 856A2316G01 | WRENCH,TORQUE LPT COUPLING NUT | 13 | |
| 856A2519 | WRENCH, COUNTERTORQUE - LPT COUPLING NUT (COUNTERTORQUE WRENCH) | 1 | |
| 856A2519G06 | WRENCH, COUNTER TORQUE - LPT COUPLING NUT (COUNTER TORQUE WRENCH) | 4 | |
| 856A2763 | WRENCH, ROLLER BEARING OUTER RACE NUTS - TGB (WRENCH) | 1 | |
| 856A2763G01 | WRENCH, ROLLER BEARING OUTER RACE NUTS - TGB (WRENCH) | 3 | |
| 856A2989G02 | TORQUE WRENCH, LPT NUT | 5 | |
| 856A2995G01 | WRENCH, TORQUE/LOOSEN - LPT COUPLING NUT | 1 | |
| 856A3268G02 | WRENCH, NUT CETER VENT TUBE SLEEVE | 13 | |
| 856A3392 | WRENCH, TORQUE - AFT ROTATING AIR/OIL SEPARATOR NUT (WRENCH) | 2 | |
| 856A3392G01 | Wrench, Torque - Aft Rotating Air/Oil Separator Nut (wrench) | 19 | |
| 856A3506 | WRENCH, TORQUE/LOOSEN-LPT COUPLING NUT | 2 | |
| 856A3506 G02 | WRENCH, TORQUE/LOOSEN - LPT COUPLING NUT | 9 | |
| 856A3506 REV E | WRENCH, TORQUE/LOOSEN-LPT COUPLING NUT | 1 | |
| 856A3506G01 | WRENCH, TORQUE/LOOSEN COUPLING NUT | 1 | |
| 856A3506G01 | WRENCH, TORQUE-LPT COUPLING NUT | 1 | |
| 856A3506G02 | WRENCH, TORQUE/LOOSEN COUPLING NUT | 9 | |
| 856A3506G02 | WRENCH, TORQUE-LPT COUPLING NUT | 9 | |
| 856A3506G03 | WRENCH, TORQUE/LOOSEN COUPLING NUT | 9 | |
| 856A3506G03 | WRENCH, TORQUE-LPT COUPLING NUT | 9 | |
| 856A3572 | WRENCH, NO. 1 BEARING INNER RACE NUT (WRENCH) | 1 | |
| 856A3572G01 | WRENCH, NO. 1 BEARING INNER RACE NUT (WRENCH) | 11 | |
| 856A3604 | WRENCH, HORIZ. DRIVE SHAFT NUT | 2 | |
| 856A3604 REV A | WRENCH, HORIZ. DRIVE SHAFT NUT | 1 | |
| 856A3604P01 | WRENCH, DRIVE SHAFT NUT | 19 | |
| 856A3798G01 | WRENCH, NO. 1 BEARING INNER RACE NUT | 4 | |
| 856AI034 | WRENCH, 35-TOOTH BEVEL GEAR LOCKMNUT | 1 | |
| 925932-1 | WRENCH, ORIFICE NUT | 1 | |
| 9441M49 | WRENCH, SPANNER TORQUE NUT | 1 | |
| 9441M49 REV B | WRENCH, SPANNER TORQUE NUT | 1 | |
| 956A7627G02 | Wrench,torque-No.5 bearing nut | 1 | |
| 956A8684G01 | WRENCH, REMOVE/INSTALL - TGB SHAFT NUT | 4 | |
| 983-9636-124 | Nut Wrench, Center Wheel Assembly | 1 | |
| 98A27207507025 | WRENCH, GROOVE NUT | 1 | |
| 98D27407517110 | Wrench, Groove Nut | 8 | |
| 98D27407517120 | Wrench, Groove Nut | 6 | |
| 98D55109009000 | WRENCH, GROOVE NUT | 12 | |
| 98D5510901000 | WRENCH WRENCH, GROOVE NUT | 3 | |
| 98D55109010000 | WRENCH, GROOVE NUT | 14 | |
| 98F27409001000 | WRENCH WRENCH, GROOVE NUT | 5 | |
| 98L55109007000 | WRENCH, FORWARD GROOVE NUT - TH | 1 | |
| 98L55109008000 | WRENCH, REAR GROOVE NUT - THS S | 1 | |
| 98S71005000000 | WRENCH, TORQUE, NUTS | 12 | |
| 98V55109009000 | WRENCH, THSA ARM BEARING NUT | 3 | |
| 99-8071-6000 | WRENCH, PROPELLER NUT RATCHET | 2 | |
| 9C2330 | WRENCH, I/R - NO 1 BEARING NUT | 1 | |
| A32004-1 | ADAPTER - WRENCH, MLG STRUT GLAND NUT | 12 | |
| A32012-13 | WRENCH, WHEEL RETAINING NUT | 26 | |
| A32021-1 | ADAPTER - WRENCH, GLAND NUT | 7 | |
| A32025-1 | ADAPTER - WRENCH, WHEEL RETAINING NUT, NLG | 20 | |
| A32034-1 | ADAPTER - WRENCH, STEERING NUT, NOSE LANDING GEAR | 8 | |
| A32045-105 | WRENCH, SPANNER R/I NLG WHEEL RETENTION NUT TORQUE | 2 | |
| A32045-105 | WRENCH, SPANNER R/I NLG WHEEL RETENTION NUT TORQUE | 2 | |
| A32045-114 | WRENCH, SPANNER R/I NLG WHEEL RETENTION NUT TORQUE | 18 | |
| A32045-34 | WRENCH, FWD TRUNION BEARING NUT | 12 | |
| A32069-1 | ADAPTER - WRENCH, ANTI-SKID TRANSDUCER RETAINER NUT | 1 | |
| A32069-7 | ADAPTER - WRENCH, ANTI-SKID TRANSDUCER RETAINER NUT | 20 | |
| A32101-1 | ADAPTER - WRENCH, WHEEL RETAINING NUT, NLG | 27 | |
| AGE-00076-003 | TORQUE-WRENCH, STAB. JOINT LOCK NUT | 3 | |
| AGE-03381-401 | WRENCH, TORQE SET FUEL LINE ISLR NUT | 3 | |
| AGE‐00076‐003 | TORQUE‐WRENCH, STAB. JOINT LOCK NUT | 3 | |
| AN850810B | DEEP CROWFOOT WRENCH, 3/8" DRIVE SAE 12-POINT SAE 5/8" FLANK DRIVE® FLARE NUT | 3 | |
| AN850813B | DEEP CROWFOOT WRENCH, 13/16" DRIVE SAE 12-POINT SAE 5/8" FLANK DRIVE® FLARE NUT | 3 | |
| AN850818B | WRENCH, CROWFOOT, FLARE NUT, 1 1/8" | 2 | |
| AN850819B | WRENCH, CROWFOOT, FLARE NUT, 1-3/16" | 1 | |
| AN850820B | WRENCH, CROWFOOT, FLARE NUT, 1 1/4" | 2 | |
| AN850821B | WRENCH, CROWFOOT, FLARE NUT, 1-5/16" | 2 | |
| AN850822B | WRENCH, CROWFOOT, FLARE NUT, 1-3/8" | 3 | |
| AN850823B | WRENCH, CROWFOOT, FLARE NUT, 1-7/16" | 1 | |
| AN850824B | WRENCH, CROWFOOT, FLARE NUT, 1 1/2" | 2 | |
| AN850825B | WRENCH, CROWFOOT, FLARE NUT, 1-9/16" | 1 | |
| AN850826B | WRENCH, CROWFOOT, FLARE NUT, 1-5/8" | 2 | |
| AN850827B | WRENCH, CROWFOOT, FLARE NUT,1-11/16" | 2 | |
| AN850828B | WRENCH, CROWFOOT, FLARE NUT, 1-3/4" | 2 | |
| AN850829B | WRENCH,CROWFOOT,FLARE NUT, 1-13/16" | 2 | |
| AN850830B | WRENCH, CROWFOOT, FLARE NUT, 1-7/8" | 2 | |
| AN850831B | WRENCH, CROWFOOT, FLARE NUT,1-15/16" | 3 | |
| AN850832B | WRENCH, CROWFOOT, FLARE NUT, 2" | 3 | |
| AN850835B | 1/2 SAE 12-POINT 2-3/16 DEEP FLARE WRENCH, NUT, CROWN WRENCH | 1 | |
| AN850838B | 1/2 SAE 12-POINT 2-3/8 DEEP FLARE WRENCH, DEEP FLARE NUT, CROWN WRENCH | 1 | |
| AN850839B | 1/2 12-POINT 2-7/16 DEEP FLARE WRENCH, DEEP FLARE NUT, CROWN WRENCH | 1 | |
| AN850841B | 1/2 SAE 12-POINT 2-7/16 DEEP FLARE WRENCH, DEEP FLARE NUT, CROWN WRENCH | 1 | |
| AN850842B | 1/2 SAE 12-POINT 2-9/16 DEEP FLARE WRENCH, NUT DEEP FLARED HANGER | 2 | |
| AN850850B | 1/2 SAE 12-POINT 3-1/8 DEEP FLARE WRENCH, DEEP FLARE NUT, CROWN WRENCH | 1 | |
| AN85086B | SNAP-ON - WRENCH, CROWFOOT, FLARE NUT, DEEP, 3/8 IN., 12-POINT | 1 | |
| AN85087B | SNAP-ON - WRENCH, CROWFOOT, FLARE NUT, DEEP, 7/16 IN., 12-POINT | 3 | |
| AN85088B | Wrench, Crowfoot, Flare Nut, Deep, 1/2", 12-Point | 3 | |
| AN85089B | SNAP-ON - WRENCH, CROWFOOT, FLARE NUT, DEEP, 9/16 IN., 12-POINT | 2 | |
| AN8514-1 | WRENCH, TAIL ROTOR RETAINING NUT | 4 | |
| AT-71684 | Assembly Wrench, Compensator Nut | 1 | |
| AT-71685 | Assembly Wrench, Compensator Nut | 1 | |
| AT-71685PM | ASSEMBLY WRENCH, COMPENSATOR NUT | 1 | |
| AT31794 | WRENCH,MLG SHOCK NUT | 5 | |
| AT57495 | WRENCH, NLG SHOCK STRUT GLAND NUT | 4 | |
| B52023 | SPANNER WRENCH, HINGE NUT, #1, 2 & 4 DOORS | 1 | |
| B52023-1 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 5 | |
| B52023-2 | Spanner wrench，upr nut | 2 | |
| B52023-5 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 1 | |
| B52023-6 | Spanner wrench，lwr nut | 1 | |
| B52023-8 | SPANNER WRENCH, HINGE NUT, NUMBER 1, 2 AND 4 DOORS | 3 | |
| C27025-1 | TORQUE WRENCH, RUDDER PCU ATTACHMENT NUT | 11 | |
| C27075-1 | SPANNER WRENCH, BRAKE NUT | 5 | |
| C32025-1 | WRENCH, NOSE LANDING GEAR OLEO GLAND NUT | 8 | |
| C32025-7 | Wrench, spanner, gland nut, NLG | 22 | |
| C32043-1 | WRENCH, NUT RETAINING | 11 | |
| C47261 | WRENCH, MAIN LG WHEEL NUT - TOOL | 23 | |
| C632G3106201 | WRENCH, SLOTTED NUT | 1 | |
| C71001 | ADAPTOR WRENCH, AFT CONE BOLT NUT | 8 | |
| C71001-1 | Wrench, Aft Conebolt Nut, CFM56-3 Engine | 11 | |
| C71014-1 | Wrench, Aft Conebolt Nut, CFM56-3 Engine | 18 | |
| C71014-3 | ADAPTER WRENCH, AFT CONEBOLT NUT | 13 | |
| C71019-1 | WRENCH, AFT CONE BOLT NUT | 7 | |
| CAT5643-3B | WRENCH, SPECIAL REMOVAL TOOL LOCKNUT | 3 | |
| CAT5925-1 | WRENCH, GLAND NUT | 1 | |
| DAPT60-0116-00 | WRENCH, RING NUT | 6 | |
| DAPT60-0400-00 | WRENCH, RING NUT | 7 | |
| DRT68032 | ADAPTOR,SOCKET WRENCH,A-LINK NUT SPANNER | 10 | |
| EMB-00064-001 | WRENCH, MAIN LANDING GEAR BALL JOINT NUT (GSE 073) EMB-120 | 2 | |
| F70038 | WRENCH, MECHANISM NUT | 13 | |
| F70085 | WRENCH, SPANNER - BEARING RETAINER NUT (DOOR VERTICAL POSITIONING) (THE BOEING COMPANY) | 23 | |
| F70312-30 | WRENCH, MLG ACTUATOR NUT CROWSFOOT | 10 | |
| F72955 | ADAPTER -0 TORQUE WRENCH, LG TRUNNION NUT TO | 1 | |
| F72959-40 | WRENCH, SPANNER - NOSE LANDING GEAR TRUNNION PIN RETAINER NUT | 24 | |
| F73011-1 | WRENCH, MLG AXLE NUT | 5 | |
| F80020-5 | Adapter Wrench, MLG Trunnion Nut | 17 | |
| F80033-8 | ADAPTER ASSY- WRENCH, HOOK SPANNER (MLG GLAND NUT) | 23 | |
| G25001-2 | WRENCH, ANTI-RATTLE NUT | 1 | |
| G25012-9 | WRENCH, ANTI RATTLE NUT | 3 | |
| G32011-1 | ADAPTER - WRENCH, WING AND BODY GEAR GLAND NUT | 6 | |
| G32039-25 | WRENCH, MLG WHEEL RETAINING NUT (MLG) | 5 | |
| G32039-42 | EQUIPMENT - WRENCH, MLG WHEEL RETAINING NUT | 5 | |
| G601R321101-1 | WRENCH, MLG PINTLE PIN NUT | 7 | |
| G601R321101−1 | WRENCH, MLG PINTLE PIN NUT | 7 | |
| G601R324101-1 | WRENCH, MLG AXLE NUT | 13 | |
| G601R324101−1 | WRENCH, MLG AXLE NUT | 13 | |
| G601R324202-1 | WRENCH, NLG AXLE NUT | 7 | |
| G71020-1 | WRENCH, FLEX NUT | 4 | |
| GS13272-1 | WRENCH, BEARING RET. NUT. | 1 | |
| GS19741-1 | WRENCH, BEARING NUT | 2 | |
| GSB6110012 | WRENCH, PROP NUT RACHET | 2 | |
| GSE55923 | Wrench, axle retaining nut | 5 | |
| GSE55933 | KIT-WRENCH,TORQUE REACTOR RETAINING PIN.NUT LWR TORQUE LINK-BLG | 2 | |
| GSE56528 | Wrench, nut, lower cardan pin, sidestay, WLG | 1 | |
| H47682 | WRENCH, MAIN LG WHEEL NUT - TOOL | 43 | |
| HS 7967 | WRENCH, SPANNER - DOME RETAINING NUT | 3 | |
| HS7564 | WRENCH, SPANNER, PROP HUB NUT | 2 | |
| HS7967 | WRENCH, SPANNER DOME RETAINING NUT | 3 | |
| HSP648 | WRENCH, DOME RETAINING NUT | 1 | |
| IAE1J12011 | WRENCH, COUPLING NUTLHT Dwg No.(537230003) | 1 | |
| IAE1J12012 | WRENCH, COUPLING NUTLHT Dwg No.(537230004) | 1 | |
| IAE1J12013 | WRENCH, COUPLING NUTLHT Dwg No.(537230005) | 1 | |
| IAE1P16139 | WRENCH, TIGHTEN - ENGINE ASSY, DIFFUSER FUEL MANIFOLD NUT | 10 | |
| J32032-22 | EQUIPMENT - WRENCH, MLG WHEEL RETAINING NUT | 23 | |
| J32032-23 | WRENCH, MLG WHEEL NUT | 11 | |
| J47549 | WRENCH, AXLE NUT NLG | 43 | |
| K32032-1 | SPANNER - WRENCH, NLG STEERING NUT | 10 | |
| L845-632 | WRENCH,RIVNUT TOOL, 6/32 | 2 | |
| LPRW-60-EA/1874 | H-60 LOCK PIN RATCHET FLARE NUT WRENCH, 7/8IN. WILLIAMS INDUSTRIAL | 1 | |
| LTCT14622-09 | Wrench, Bearing Nut | 1 | |
| LTCT5675 | Wrench, Spanner Nut | 1 | |
| MBEU52239 | WRENCH,SPANNER-SPANNER COLLAR NUT | 1 | |
| MIT65B01201 | ADAPTER - WRENCH, MLG STRUT GLAND NUT SPL-1861 | 7 | |
| MIT65B01202-1 | SPANNER/WRENCH, L/G WHEEL NUT | 10 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 5 | |
| MIT65BO120 | ADAPTER - WRENCH, MLG STRUT GLAND NUT | 1 | |
| P-1914 | WRENCH, NUT RETAINING, MAIN LANDING GEAR WHEEL | 1 | |
| P-1932 | WRENCH, NUT RETAINING | 1 | |
| P.1914 | Wrench, Retaining Nut | 1 | |
| P.1932 | Wrench, Retaining Nut | 1 | |
| PWA12200 | WRENCH, 4.5 NUT WRENCH | 1 | |
| PWA27026 | WRENCH,PROTECTOR - HPT TIEROD NUT_[PWA27026] | 2 | |
| PWA45014 | WRENCH, COUPLING NUT INSTALLER | 1 | |
| PWA50682 | WRENCH, BEARING NUT | 1 | |
| PWA85034 | WRENCH, TORQUE (NO. 2 FRONT SEAL SEAT NUT) | 1 | |
| PWA85429 | WRENCH, TORQUE (LPT NUT) | 1 | |
| PWA85510 | WRENCH, TORQUE (FRONT SEAL SEAT NUT) | 1 | |
| PWC30114-08 | WRENCH, RETAINING NUT | 6 | |
| PWC30114-16 | RETAINING, NUT WRENCH, PROP GOVERNOR | 6 | |
| PWC31050 | WRENCH, TURBINE DISK NUT | 8 | |
| RB T101501P | WRENCH, TRANSMISSION CASE NUT | 1 | |
| RB T101502P | WRENCH, GEARSHAFT NUT | 1 | |
| RB T101600 | WRENCH, QUILL SEAL NUT | 2 | |
| RB T103007 | Wrench, Splined Collector Pinion Nut | 1 | |
| RB T103134 | Wrench, Gear Box Nut | 2 | |
| RB0006-809-00650 | Barrel Wrench, Sherlock Nut | 1 | |
| RB6893358 | Wrench, Install & Removal Gas Producer Turbine Frt. Bearing Retaining Nut | 2 | |
| RB6893387 | Wrench, Spanner Torquemeter Shaft Nut | 2 | |
| RBA9826 | Wrench, Stud Nut | 2 | |
| RBT101960 | WRENCH, NUT, SEAL, ENGINE GEARBOX | 3 | |
| RBT400261 | WRENCH, REFERENCE GEAR RETAINING NUT | 1 | |
| RBT400358 | Wrench, Clutch Bearing Nut | 1 | |
| RBW109-3101-22-1 | Wrench, Locking Counter Nut | 2 | |
| RBW6205G26631-3G | Wrench, Special Nut Removal/Installation | 2 | |
| RBW6305G01052-3G | Wrench, Main Gear Box Oil Pump Ring Nut Removal/Install | 1 | |
| RSE1014 | WRENCH, SPANNER - ANTI-INE DUCT SEAL NUT | 2 | |
| RSE1014 REV A | WRENCH, SPANNER - ANTI-INE DUCT SEAL NUT | 1 | |
| RSE1031 | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSE1031 REV B | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSE1060 | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 6 | |
| RSE1060 REV NC | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSE1098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 20 | |
| RSE1098 REV B | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RSE1098-1 | WRENCH,SPANNER AFTENGINE MOUNT NUTS | 11 | |
| RSE1098-5 | WRENCH,SPANNER AFTENGINE MOUNT NUTS | 7 | |
| RSEI03I | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSEI060 | WRENCH, SPANNER - ANTI-ICE DUCT SEAL NUT | 1 | |
| RSEI098 | WRENCH, SPANNER -AFT. ENG. MOUNT NUTS (SET OF 3) | 1 | |
| RSEI0I4 | WRENCH, SPANNER - ANTI-INE DUCT SEAL NUT | 1 | |
| RXFS605B | Set, Wrench, Flare Nut Double End, 6-Point (5 pcs.) (1/4"-5/16" to 3/4"-13/16") | 2 | |
| SD12553-1 | WRENCH,RETAINER NUT,NOSEWHEEL | 3 | |
| SD12575-1 | WRENCH,LOCKNUT | 1 | |
| SD5523-1 | WRENCH,SOCKET,MLG WHEEL RETAINING NUT | 1 | |
| SL90-315-.3750 | Wrench, Brg. Locknut | 18 | |
| SL90-315-.4375 | WRENCH, BRG. LOCKNUT | 12 | |
| SL90-315-.5000 | Wrench, Brg. Locknut | 10 | |
| SL90-315-.5625 | Wrench, Brg. Locknut | 15 | |
| SL90-315-.6250 | Wrench, Brg. Locknut | 12 | |
| SL90-315-.7500 | Wrench, Brg. Locknut | 15 | |
| SL90-315-.8750 | WRENCH, BRG. LOCKNUT | 4 | |
| SL90-315-1.0000 | WRENCH, BRG. LOCKNUT | 6 | |
| SL90-315-1.2500 | WRENCH, BRG. LOCKNUT | 5 | |
| SL90-315-1.5625 | WRENCH, BRG. LOCKNUT | 2 | |
| SL90-315-3750 | WRENCH, BRG. LOCKNUT | 18 | |
| SL90-315-4375 | WRENCH, BRG. LOCKNUT | 12 | |
| SL90-315-5000 | WRENCH, BRG. LOCKNUT | 10 | |
| SL90-315-5625 | WRENCH, BRG. LOCKNUT | 15 | |
| SL90-315-6250 | WRENCH, BRG. LOCKNUT | 12 | |
| SL90-315-7500 | WRENCH, BRG. LOCKNUT | 15 | |
| SL90-315-7500 | WRENCH, NOTCHED, TIGHTENING of NUTS NSA5454 | 15 | |
| SL90-322-.5625 | Wrench, Brg. Locknut | 23 | |
| SL90-322-5625 | WRENCH, BRG. LOCKNUT | 23 | |
| SL90-374-.3750 | Wrench, Brg. Locknut | 9 | |
| SL90-374-.4375 | Wrench, Brg. Locknut | 9 | |
| SL90-374-.6250 | Wrench, Brg. Locknut | 15 | |
| SL90-374-4375 | WRENCH, BRG. LOCKNUT | 9 | |
| SL90-374-6250 | WRENCH, NOTCHED, TIGHTENING OF NUTS | 15 | |
| SL90-374-7500 | WRENCH, NOTCHED, TIGHTENING OF NUTS | 15 | |
| ST-374 | WRENCH, CYLINDER BASE NUT 9/16 HEX | 2 | |
| ST-375 | WRENCH, CYLINDER BASE NUT 3/4 HEX | 2 | |
| STI3108 | SOCKET WRENCH, T/R HEAD BOLT, NUT TIGHTEN | 1 | |
| STI3111 | SPECIAL WRENCH, MGB OIL PUMP RING NUT REM/INST | 1 | |
| SWE 84349-B | WRENCH, PROPELLER RETAINING NUT | 1 | |
| SWE84349 | WRENCH, PROPELLER RETAINING NUT | 4 | |
| T-448407 | Wrench,Locknut | 1 | |
| T-448407PM | WRENCH,LOCKNUT | 1 | |
| T101306 | SPLINED WRENCH, MAIN DRIVE SHAFT NUT | 4 | |
| T101449 | WRENCH, DUPLEX BEARING NUT | 2 | |
| T101500 | WRENCH, MUST BEARING NUT | 1 | |
| T101501 | WRENCH, TRANSMISSION CASE NUT | 1 | |
| T101502 | WRENCH, GEARSHAFT NUT | 1 | |
| T101513 | WRENCH, TAIL ROTOR OUTPUT SHAFT NUT | 2 | |
| T101600 | WRENCH, QUILL SEAL NUT | 1 | |
| T101960 | WRENCH, NUT, SEAL, ENGINE GEARBOX | 1 | |
| T103134 | WRENCH, GRBX NUT | 1 | |
| T5-0972K | WRENCH, AUTOPILOT DISCONNECT SWITCH NUT | 1 | |
| T9-1760K-1 | NUT WRENCH, CENTER WHEEL ASSEMBLY | 1 | |
| T9-2135K-1 | Nut Wrench, Center Wheel Assembly | 1 | |
| T90453 | SPANNER WRENCH, ORFICE RETAINER NUT | 1 | |
| TECHNO 5229 | TOOL GLAND NUT SPANNER WRENCH, G500, G600,G650 | 1 | |
| TMRX10 | Wrench, Crowfoot, Flare Nut, Shallow, 5/16", 12-Point | 2 | |
| TMRX12 | Wrench, Crowfoot, Flare Nut, Shallow, 3/8", 12-Point | 3 | |
| TMRX8 | WRENCH, CROWFOOT, FLARE NUT, SHALLOW, 1/4" | 2 | |
| WR341 | ORIFICE RETAINER NUT WRENCH, NLG | 1 | |
| lC6846 | WRENCH, SPANNER-RETAINER NUT, LPT AFT SHAFT | 1 | |
| lC6856 | WRENCH, SPANNER NUT - NO. 6 BEARING | 1 | |
| lC6897 | WRENCH, SPANNER- RETAINING NUT, BEAR. 5 | 1 | |
| lC6950 | WRENCH, SPANNER, VERT. & HORIZ.-CPLG NUT, HPTR | 1 | |
| 98A26213501000 | WRENCH,UNION NUT,SPECIAL | 8 | |
| 98A27603005000 | WRENCH,RACK,USED TO TIGHT SLOTTED NUT ON | 7 | |
| 98A29113501000 | WRENCH,UNION NUT,SPECIAL | 8 | |
| 98A29113502000 | WRENCH,UNION NUT,SPECIAL | 7 | |
| 98A29113503000 | WRENCH,UNION NUT,SPECIAL | 6 | |
| 98A76103503000 | WRENCH,CASTELLATED NUT | 5 | |
| 98A76103504000 | WRENCH,CASTELLATED NUT | 6 | |
| C47955 | CASTELLATED WRENCH,USED LOCK NUT FITED T | 10 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
