| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 4918CF | WRENCH, CROWFOOT | 1 | |
| 4920CF | WRENCH, CROWFOOT | 1 | |
| 4924CF | WRENCH, CROWFOOT | 1 | |
| 4928CF | WRENCH, CROWFOOT | 1 | |
| F70312-32 | WRENCH, CROWFOOT | 8 | |
| F70312-34 | Wrench, Crowfoot | 9 | |
| FC42A | WRENCH, CROWFOOT | 4 | |
| J4918CF | WRENCH, CROWFOOT | 1 | |
| J4920CF | WRENCH, CROWFOOT | 1 | |
| J4924CF | WRENCH, CROWFOOT | 1 | |
| J4928CF | WRENCH, CROWFOOT | 1 | |
| PWA86156 | WRENCH, CROWFOOT | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 106TMCO | SET, WRENCH, CROWFOOT, OPEN | 4 | |
| 208AN | SNAP ON SET, WRENCH, CROWFOOT FLARE NUT, 12-POINT (8 PCS.) (5/8" TO 1 1/16") | 2 | |
| 211FCOA | Set, Wrench, Crowfoot Open End (11 pcs.) (3/8" to 1") | 2 | |
| 214FC | SET, WRENCH, CROWFOOT OPEN END WITH SIDE LOCK HOLE | 2 | |
| 315AN | SET, WRENCH, CROWFOOT FLARE 15 PCS. | 4 | |
| 4916CF | PROTO J4916CF CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1/2 INCH HEAD SIZE | 1 | |
| 4930CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 15/16 INCH HEAD SIZE | 1 | |
| 4934CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 1/16 INCH HEAD SIZE | 1 | |
| 4942CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 5/16 INCH HEAD SIZE | 1 | |
| 4944CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 3/8 INCH HEAD SIZE | 1 | |
| 4946CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 7/16 INCH HEAD SIZE | 1 | |
| 4950CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 9/16 INCH HEAD SIZE | 1 | |
| 4952CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 5/8 INCH HEAD SIZE | 1 | |
| 4954CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 11/16 INCH HEAD SIZE | 1 | |
| 4956CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 3/4 INCH HEAD SIZE | 1 | |
| 4958CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 13/16 INCH HEAD SIZE | 1 | |
| 4960CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 7/8 INCH HEAD SIZE | 1 | |
| 4962CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 15/16 INCH HEAD SIZE | 1 | |
| 4964CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 2 INCH HEAD SIZE | 1 | |
| 6MIT65B01500 | CROWFOOT - TORQUE WRENCH, HYDRAULIC ACTUATOR | 2 | |
| ADCF8 | WRENCH, CROWFOOT, AD | 2 | |
| AN850810B | DEEP CROWFOOT WRENCH, 3/8" DRIVE SAE 12-POINT SAE 5/8" FLANK DRIVE® FLARE NUT | 3 | |
| AN850812B | WRENCH, CROWFOOT, FL | 3 | |
| AN850813B | DEEP CROWFOOT WRENCH, 13/16" DRIVE SAE 12-POINT SAE 5/8" FLANK DRIVE® FLARE NUT | 3 | |
| AN850816B | WRENCH, CROWFOOT, FL | 3 | |
| AN850817B | WRENCH, CROWFOOT, FL | 3 | |
| AN850818B | WRENCH, CROWFOOT FLA | 2 | |
| AN850819B | WRENCH, CROWFOOT, FLARE NUT, 1-3/16" | 1 | |
| AN850820B | WRENCH, CROWFOOT, FLARE NUT, 1 1/4" | 2 | |
| AN850821B | WRENCH, CROWFOOT, FLARE NUT, 1-5/16" | 2 | |
| AN850822B | WRENCH, CROWFOOT, FL | 3 | |
| AN850823B | WRENCH, CROWFOOT, FLARE NUT, 1-7/16" | 1 | |
| AN850824B | WRENCH, CROWFOOT, FLARE NUT, 1 1/2" | 2 | |
| AN850825B | WRENCH, CROWFOOT, FLARE NUT, 1-9/16" | 1 | |
| AN850826B | WRENCH,CROWFOOT, FLA | 2 | |
| AN850827B | WRENCH, CROWFOOT, FLARE NUT,1-11/16" | 2 | |
| AN850828B | WRENCH, CROWFOOT, FLARE NUT, 1-3/4" | 2 | |
| AN850829B | WRENCH,CROWFOOT,FLARE NUT, 1-13/16" | 2 | |
| AN850830B | WRENCH, CROWFOOT, FLARE NUT, 1-7/8" | 2 | |
| AN850831B | WRENCH, CROWFOOT, FLARE NUT,1-15/16" | 3 | |
| AN850832B | WRENCH, CROWFOOT, FLARE NUT, 2" | 3 | |
| AN850834B | WRENCH, CROWFOOT, FL | 2 | |
| AN850836B | WRENCH, CROWFOOT, FL | 2 | |
| AN85086B | SNAP-ON - WRENCH, CROWFOOT, FLARE NUT, DEEP, 3/8 IN., 12-POINT | 1 | |
| AN85087B | WRENCH, CROWFOOT, FL | 3 | |
| AN85088B | Wrench, Crowfoot, Flare Nut, Deep, 1/2", 12-Point | 3 | |
| AN85089B | SNAP-ON - WRENCH, CROWFOOT, FLARE NUT, DEEP, 9/16 IN., 12-POINT | 2 | |
| F70312-32 | ADAPTER - WRENCH, CROWFOOT | 8 | |
| F70312-34 | Wrench,Crowfoot | 9 | |
| F70312-49 | WRENCH,CROWFOOT MLG OFFSET 3.3/8" | 2 | |
| F70312-50 | WRENCH, CROWFOOT TRAP FITTING | 9 | |
| F70312-51 | Wrench, crowfoot-NLG door actuator | 6 | |
| FC020A | WRENCH, CROWFOOT, OP | 4 | |
| FC024A | WRENCH,CROWFOOT OPEN END | 6 | |
| FC34B | WRENCH, CROWFOOT, OP | 3 | |
| FC36A | WRENCH, CROWFOOT, OP | 5 | |
| FC38A | WRENCH, CROWFOOT, OP | 3 | |
| FC40A | WRENCH, CROWFOOT, OP | 3 | |
| FC42A | WRENCH, CROWFOOT, OPEN END, 1 5/16" | 4 | |
| FC44A | WRENCH, CROWFOOT, OP | 2 | |
| FC48A | WRENCH, CROWFOOT, OP | 2 | |
| FC54A | WRENCH, CROWFOOT, OP | 3 | |
| FC56A | WRENCH, CROWFOOT, OP | 3 | |
| FC58A | WRENCH, CROWFOOT, OPEN END, 13/16" | 4 | |
| FC60A | WRENCH, CROWFOOT, OP | 4 | |
| FC64A | WRENCH, CROWFOOT, OP | 3 | |
| FC68A | WRENCH, CROWFOOT, OP | 4 | |
| FC72A | WRENCH, CROWFOOT, OP | 4 | |
| FC76A | WRENCH, CROWFOOT, OP | 4 | |
| FC86A | WRENCH, CROWFOOT, OP | 4 | |
| FC96A | WRENCH, CROWFOOT, OP | 3 | |
| FCO18A | WRENCH, CROWFOOT, OP | 5 | |
| FCO22A | WRENCH, CROWFOOT, OP | 6 | |
| FCO24A | WRENCH, CROWFOOT, OP | 6 | |
| FCO26A | WRENCH, CROWFOOT, OP | 4 | |
| FCO28A | WRENCH, CROWFOOT, OP | 4 | |
| FCO30A | WRENCH, CROWFOOT, OP | 4 | |
| FCO32A | WRENCH, CROWFOOT, OP | 4 | |
| FPS-001 | WRENCH,CROWFOOT OPEN END | 8 | |
| J4914CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 7/16 INCH HEAD SIZE | 1 | |
| J4916CF | PROTO J4916CF CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1/2 INCH HEAD SIZE | 1 | |
| J4930CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 15/16 INCH HEAD SIZE | 1 | |
| J4934CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 1/16 INCH HEAD SIZE | 1 | |
| J4942CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 5/16 INCH HEAD SIZE | 1 | |
| J4944CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 3/8 INCH HEAD SIZE | 1 | |
| J4946CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 7/16 INCH HEAD SIZE | 1 | |
| J4950CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 9/16 INCH HEAD SIZE | 1 | |
| J4952CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 5/8 INCH HEAD SIZE | 1 | |
| J4954CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 11/16 INCH HEAD SIZE | 1 | |
| J4956CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 3/4 INCH HEAD SIZE | 1 | |
| J4958CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 13/16 INCH HEAD SIZE | 1 | |
| J4960CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 7/8 INCH HEAD SIZE | 1 | |
| J4962CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 1 15/16 INCH HEAD SIZE | 1 | |
| J4964CF | CROWFOOT SOCKET WRENCH, ALLOY STEEL, CHROME, 3/8 INCH DRIVE SIZE, 2 INCH HEAD SIZE | 1 | |
| K55003-3 | CROWFOOT WRENCH,3 INCH | 1 | |
| RRT040857 | WRENCH, CROWFOOT 1 1/8 | 1 | |
| SC036 | CROWFOOT WRENCH, 1 1/8 INCH, SNAP-ON | 4 | |
| SC046 | Wrench, Crowfoot 1 7/16" A/F | 5 | |
| SC052 | Wrench, Crowfoot 15/8" A/F, 1/2" Drive | 4 | |
| SCO36 | CROWFOOT WRENCH, 1 1/8 INCH, SNAP-ON | 4 | |
| SCO48 | WRENCH, CROWFOOT, OP | 3 | |
| SCO52 | WRENCH, CROWFOOT, OP | 4 | |
| SCO56 | WRENCH, CROWFOOT, OP | 5 | |
| TMCO12 | Wrench, Crowfoot, Open End, 3/8" | 2 | |
| TMRX10 | WRENCH, CROWFOOT, 1/4" DR,5/16", 12PT, | 2 | |
| TMRX12 | Wrench, Crowfoot, Flare Nut, Shallow, 3/8", 12-Point | 3 | |
| TMRX8 | WRENCH, CROWFOOT, FLARE NUT, SHALLOW, 1/4" | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
