| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1179-8000 | WORK STAND | 2 | |
| 3FT | WORK STAND | 1 | |
| 3FTWORKSTAND | WORK STAND | 1 | |
| 5FT | WORK STAND | 1 | |
| 5FTWORKSTAND | WORK STAND | 1 | |
| 7FT | WORK STAND | 1 | |
| 7FTWORKSTAND | WORK STAND | 1 | |
| 8647-010 | WORK STAND | 1 | |
| 8FT | WORK STAND | 1 | |
| 8FTWORKSTAND | WORK STAND | 1 | |
| 9FT | WORK STAND | 1 | |
| 9FTWORKSTAND | WORK STAND | 1 | |
| HU87509 | WORK STAND | 1 | |
| IAE1J12362 | WORK STAND | 1 | |
| IAE1J12395 | WORK STAND | 1 | |
| IAE1J13206-A | WORK STAND | 1 | |
| RRT099677 | WORK STAND | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) SG156-002 | RESCUE HOIST WORK STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG231-001 | Dual rescue hoist work stand (CALIBRATION) (CALIBRATION) | 1 | |
| 04-6005-1100 | PLATFORM - WORK STAND | 4 | |
| 04-6029-5111 | ENGINE WORK STAND | 8 | |
| 04-6030-5111 | WORK STAND - B5 TYPE | 4 | |
| 08-2001-0000 | PORTABLE TURBINE ENGINE WORK STAND | 5 | |
| 08-2021C0000 | ENGINEWORK STAND | 5 | |
| 08-2034-0010 | STAND: ENGINE,WORK,UNIV, NEED ADAPTER KIT | 2 | |
| 08-2220C0000 | STAND: ENGINE,WORK, WILLIAMS: FJ44 | 3 | |
| 10-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 1179-8000 | STAND - WORK - GENERAL PURPOSE - HYDRAULICALLY ACTUATED - TOWABLE - HEIGHT: 12 - 29 FEET | 2 | |
| 12-1-N | COLD WORKING TOOL STANDARD | 3 | |
| 12-2-N | COLD WORKING TOOL STANDARD | 1 | |
| 15F1900 | WORK STAND (ADJUSTABLE HEIGHT) | 3 | |
| 16-1-N | COLD WORKING TOOL STANDARD | 1 | |
| 182-534-10 | MITUTOYO WORKING STANDARD SCALE, 1000MM RANGE, 1MM GRAD | 1 | |
| 18502 | TAIL WORK STAND 6 METERS | 1 | |
| 1AE1N20005 | DOLLY & WORKSTAND THRUST REVERSER | 1 | |
| 1AE1N20005 REV D | DOLLY & WORKSTAND THRUST REVERSER | 1 | |
| 1AE1N20006 | DOLLY & WORKSTAND THRUST REVERSER DOORS | 1 | |
| 1AE1N20006 REV F | DOLLY & WORKSTAND THRUST REVERSER DOORS | 1 | |
| 1AE2R19854 | OUTER DIAMETER LOCATION WORKING STANDARD | 1 | |
| 1AE2R19860 | INNER DIAMETER LOCATION WORKING STANDARD | 1 | |
| 1C5830 | STAND, REWORK & STORAGE LPT ROTOR, VERTICAL | 1 | |
| 1C5830 REV H | STAND, REWORK & STORAGE LPT ROTOR, VERTICAL | 1 | |
| 1J13204 | STAND, WORK | 1 | |
| 41046 | HYDRAULIC PUMP KIT, 18500 WORK STAND | 1 | |
| 208857 | COLD WORKING TOOL STANDARD | 1 | |
| 2001099 | B-7 (2011) Maintenance & Crew Access Stairway/Stand. 7' to 15' platform height, 7' to 20' working height. Wide 4'x7' platform and full bumpers (handles DC-9, 727, DC8, 757, 767, A300, A310, A320 series airframes). | 1 | |
| 2001100 | model 2187 5-23' working height wing maintenance stand. 5-17' platform height, 750 lb. weight capacity, 4' x 4' platform with 10' x 10' railing for protected working area. Overhang: In the lowest position 5', from the edge of the safety fence to the fron | 1 | |
| 2001587 | 2865 Maintenance Stand. 136" to 29' working height with 42"x72" platform. Unit allows for clearance of DC10/MD11 fuselage for maintenance on #2 engine. | 1 | |
| 2003642 | B-4 (3060) Maintenance Stand. Foot actuated hydraulic pump, 8 Inch (20cm) heavy-duty swivel casters with brakes and swivel locks, Working height of 36-86 inches (91-218cm), Platform size of 30 x 76 inches (76-193cm), 500 lbs. (227kg) load capacity | 1 | |
| 2004082 | B-5 (3065) Maintenance Stand. Foot actuated hydraulic pump, 8 Inch (20cm) heavy-duty swivel casters with brakes and swivel locks, Working height of 88-138 inches (232-351cm), Platform size of 30 x 76 inches (76-193cm), 500 lbs. (227kg) load capacity | 1 | |
| 2008035 | Model 1986 Maintenance Stand (B1 extended platform): 3'-16' Working Height, 3' to 10' Platform Height, 4' x 11' Deck, Hydraulic hand pump. | 1 | |
| 2017837 | NB & WB Adjustable Fuel Stand. Provides a working height range of 112" to 209". Sturdy structural steel construction is powder coated for durability. Full bumpers on platform railings protect underwing of aircraft. High quality hydraulic lift allows easy | 1 | |
| 2C14048 | STAND, REWORK/STORAGE HP TURB ROTOR | 1 | |
| 2C14048 REV D | STAND, REWORK/STORAGE HP TURB ROTOR | 1 | |
| 2C14048G03 | STAND, REWORK STORAG | 3 | |
| 2C14048G03TK | STAND, REWORK/STORAGE-HPT ROTOR VERTICAL | 1 | |
| 2C14048G04 | STAND, REWORK/STORAG | 1 | |
| 2C6061 | STAND, REWORK & STORAGE HIGH PRESSURE TURBINE ROTR | 1 | |
| 2C6061G01 | STAND, REWORK AND STORAGE - HP | 1 | |
| 2C6061G04 | STAND, REWORK AND STORAGE | 1 | |
| 2C6067 | STAND, REWORK & STORAGE- HIGH PRESSURE TURBINE ROT | 1 | |
| 2R19869 | WORKING STANDARD | 1 | |
| 330FWS-FX | A330 FUSELAGE WORK STAND, FIXED HEIGHT | 1 | |
| 330FWS-FX 80024-002 | A330 FUSELAGE WORK STAND | 1 | |
| 330Fws-fx | A330 Fuselage work stand, fixed height | 1 | |
| 330RFWS-HA | A330 REAR FUSELAGE WORK STAND | 1 | |
| 3600-25 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 25' (7.6 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 3600-50 | ULTRA LIGHT AIR HOSE ( INNER DIAMETER: 1/4" )( MAXIMUM WORKING PRESSURE: 300 PSI )( OUTER DIAMETER: .472" )( OVERALL LENGTH: 50' (15.2 M) )( TYPE: STANDARD HOSE ) | 1 | |
| 5230TD16429-501 | Cargo Door Work Stand | 1 | |
| 6-2-N | COLD WORKING TOOL STANDARD | 3 | |
| 6-3-NRIB6 | COLD WORKING TOOL STANDARD | 1 | |
| 7011 SN | MITUTOYO MAGNETIC STAND 160MM WORKING RADIUS | 4 | |
| 7231TD14168 | Module Table Work Stand PW4000 | 1 | |
| 7832TD14391-101 | Parts & Rework (V2500 Stand) | 1 | |
| 7832TD14391-102 | Parts & Rework (V2500 Stand) | 1 | |
| 7832TD14393-101 | Parts & Rework (V2500 Stand) | 1 | |
| 7832TD14393-102 | Parts & Rework (V2500 Stand) | 1 | |
| 7832TD14397 | Parts & Rework (V2500 Stand) | 1 | |
| 8600176 | STAND, BR715 ENGINE WORK (POGO STICK) | 1 | |
| 8600177 | ENGINE WORK STAND (POGO STICK) | 1 | |
| 8600178 | ENGINE WORK STAND (POGO STICK) | 1 | |
| 8600179 | ENGINE WORK STAND (POGO STICK) | 1 | |
| 886-01 | ENGINE WORK STAND | 1 | |
| 886-02 | ENGINE WORK STAND | 1 | |
| 956A8429 | WORK STAND - TURBINE WHEELS | 1 | |
| 98F54003011000 | PYLON WORK STAND | 10 | |
| 98S71003002002 | ENGINE WORK STAND SUPPORT TOOL | 8 | |
| 9C1364G01 | SUPPORT, TCF HORIZONTAL (TCF HORIZONTAL SUPPORT) WHEN REWORK ACCOMPLISHED IN SHIPPING STAND 9C6001 | 1 | |
| 9C1364G02 | SUPPORT, TCF HORIZONTAL (TCF HORIZONTAL SUPPORT) WHEN REWORK ACCOMPLISHED IN SHIPPING STANDS 9C60019C6025 | 1 | |
| 9C3138G02 | ONE PIECE GUIDE TUBE EXTENSION (TUBE EXTENSION GUIDE) WHEN REWORKING IN 9C6025 STAND | 1 | |
| 9C6014G03 | STAND, PERSONNEL FAN INLET (PERSONNEL STAND)_FAN INNER WORK STAND._[9C6014G03] | 4 | |
| 9C6025P02 | STAND - TRANSPORTATION/WORK, GE90 THRUST REVERSER | 1 | |
| A20013-1 | Work Table - Pilots Aisle Stand | 5 | |
| A20013-2 | Work table-pilots aisle stand | 1 | |
| A961250 | RADOME ACCESS WORKSTAND | 1 | |
| A961500 | RADOME ACCESS WORKSTAND | 1 | |
| A962000 | CABIN ACCESS WORKSTAND | 1 | |
| AES-.187SS/1.5WL | STAINLESS STEEL STANDARD ELOTEST ROTARY PROBE, 3/16"Ø,100KHZ-2MHZ 1.5" (38.1mm) WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AES-6.3MSE | STANDARD ELOTEST ROTARY PROBE SPLIT END 6.3MM 100KHZ-2MHZ.. 2.0" WORKING LENGTH | 1 | |
| AESY-.125-.156 | STANDARD ELOTEST ROTARY PROBE ..100KHZ-2MHZ 1.3" WORKING LENGTH | 1 | |
| AESY-.156-.187 | STANDARD ELOTEST ROTARY PROBE..100KHZ-2MHZ 1.3" WORKING LENGTH | 1 | |
| AFK-AUR9 | Scanner Probe kit, ""SUB"" scanner series:9 probes with standard working lengths. Probes "SUB-8-10, SUB-10-12, SUB-12-14, SUB-14-16, SUB-16-18, SUB-18-20, SUB-20-24, SUB-24-28, SUB-28-32. Includes shipping/ transport kit capable of storing scanner cable a | 1 | |
| AJ65B08027 | WORK STAND - CARRIAGE ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| AJ65B08027 | WORK STAND - CARRIAGE ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| AJ65B10187 | WORK STAND - INBOARD TRAILING EDGE FLAP CARRIAGE ASSEMBLY | 1 | |
| AM-1020 | STAND - WORK, GENERAL PURPOSE HEIGHT 5-10 FEET | 1 | |
| AM-1022 | STAND - WORK, GENERAL PURPOSE | 1 | |
| AM-1022 | STAND – WORK, GENRAL PURPOSE | 1 | |
| AM-1737 | STAND - WORK, GENERAL PURPOSE | 1 | |
| AM1020 | STAND - WORK, GENERAL PURPOSE HEIGHT 5-10 FEET | 1 | |
| ATRSM20 | ENGINE WORK STAND SUPPORT TOOL | 6 | |
| AURFBSE-5.5M/40MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 40mm(1.57") WORKING LENGTH 100KHZ-2MHZ. EXPANDABLE PROBE HEAD DIAMETER= 5.5mm(0.2165Ø - APPROXIMATELY 6.91mmØ 0.272"Ø. Includes Test Report and C... | 1 | |
| AURFBSE-6.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.236"Ø) - 10.0mmØ(.315"Ø). Includes Test Report and Certificate of Con | 1 | |
| AURFBSE-8.0M/51MWL | STANDARD UNIVERSAL EXPANDABLE FLAT BOTTOM ROTARY EDGE PROBE ( CENTERED COIL ) , 4 PIN FISCHER CONNECTOR 51mm(2.0") WORKING LENGTH 100KHz-2MHz. EXPANDABLE PROBE HEAD DIAMETER= 8.0mm(0.315"Ø) - 10.0mmØ(.394"Ø). Includes Test Report and Certificate of Con | 1 | |
| B-1 | B1 AIRCRAFT MAINTENANCE STAND WORKING HEIGHT RANGES FROM 5' TO TO 15'. | 6 | |
| B-14 | STAND, WORK - FIN ACCESS - 4 FT BY 5 FT PLATFORM - TESTED TO 1000 LB - WORKING HEIGHT 9 - 39 FEET | 5 | |
| B-9 | WORK STAND (4-21 FT.) | 1 | |
| B14 | STAND - WORK, FIN ACCESS, WORKING HEIGHT 9-39 FEET | 5 | |
| B9 | WORK STAND (4-21 FT.) | 1 | |
| B9?????????????????? | STAND , WORK ??? FIN ACCESS ?????????????????????? | 1 | |
| B9 | STAND , WORK – FIN ACCESS | 1 | |
| BT780035 | Bushig, Pillow Blk, C N A Work Stand | 1 | |
| C78032-75 | TR WORKSTAND | 2 | |
| C78036-1 | STAND - STORAGE/WORK, CFM LEAP-1B THRUST REVERSER | 9 | |
| CBCE-14A-0601F | STANDARD NOSECAP (FOR 3/16" COLDWORK) | 1 | |
| CBCE-14A-0801F | STANDARD NOSECAP (FOR 1/4" COLDWORK) | 1 | |
| CFM56-3 (LH) | ENGINE WORK STAND (LH) | 1 | |
| CP30138/10 | WORKSHOP STAND | 1 | |
| CP30245 | SLING IDG REM/INST IN WORK STAND | 1 | |
| CT780049 | Bearing Blk, Trunnion, C N A Workstand | 1 | |
| D71STA00027G01 | GE90 WORKSHOP STAND | 1 | |
| DAPT60-0165-00 | Q400 PROP STAND W/ WORK PLATFORM & DAPT73-0010-00-IAS MANDREL | 5 | |
| DAPT60-0165-00-IAS | Q400 PROP STAND W/ WORK PLATFORM & DAPT73-0010-00-IAS MANDREL | 1 | |
| DIFUSSER STAND WORK | DIFUSSER STAND WORK | 1 | |
| DRG/4001-1 | WORKSTAND | 1 | |
| DT780020 | Nozzle Work Stand | 1 | |
| DT780025 | Shaft, Fork Rotation, C N A Workstand | 1 | |
| DT780026 | Brake Block, Fork, C N A Workstand | 1 | |
| DT780066 | Bracket, Trunnion, C N A Work Stand | 1 | |
| DT7830200BA3001 | Trent700 Thrust Reverser Workshop Stand | 1 | |
| DZZ7052 | WORKSTAND ASSY | 1 | |
| F72946-1 | DOLLY, WORK STAND,& ADAPTER-THRUST RVRSR TO | 1 | |
| F72946-2 | DOLLY - WORKSTAND | 1 | |
| FG16420-23 | Stand Assy Work Table | 1 | |
| G27080-1 | WORKSTAND - CARRIAGE ASSEMBLY, OUTBOARD TRAILING EDGE FLAP | 1 | |
| G27081-1 | WORKSTAND - CARRIAGE ASSEMBLY, INBOARD TRAILING EDGE FLAP | 1 | |
| G78010-1 | Stand -Transportation/Work. Thrust Reverser. Genx-2B | 1 | |
| G78010-87 | STAND - TRANSPORTATION/WORK, THRUST REVERSER, GEnx-2B | 3 | |
| GSB1200003 | STAND-ENGINE WORK | 1 | |
| H1X3001 | WORKSTAND MOBIL T/R | 1 | |
| HIX 3001-0G | THRUST REVERSER WORKSTAND | 5 | |
| HIX 3001−0G | MOBILE WORKSTAND | 5 | |
| HIX1003 | WORKSTAND-MOBILE | 12 | |
| HIX3001 | WORKSTAND-MOBILE | 11 | |
| HIX3001 REV B | WORKSTAND MOBILE | 1 | |
| HIX3001-0 | WORKSTAND-MOBILE | 1 | |
| HIX3001-01G | WORKSTAND-MOBILE | 1 | |
| HIX3001-0G | WORKSTAND-MOBILE | 5 | |
| HIX7001 | WORKSTAND-MOBILE | 1 | |
| HU7118 | WORKSHOP STAND | 1 | |
| HU87118 | WORKSHOP STAND | 1 | |
| HU87509 | WORKSTAND | 1 | |
| IAE1F10049 | LPT STAND WORKLHT Dwg No.(537250072) | 2 | |
| IAE1J12362 | STAND WORK No2 Brg Supp. StandLHT Dwg No.(537220068) | 1 | |
| IAE1J12387 | STAND WORK FAN ROTOR CENTER LPC STUB SHAFT INTERMEDIATE | 1 | |
| IAE1J13206 | STAND,WORK | 1 | |
| IAE1N20004 | DOLLY-WORKSTAND THRUST REVERSER LEFT HAND OR DOLLY-THRUST REVERSER | 15 | |
| IAE1N20005 | DOLLY-WORKSTAND THRUST REVERSER LEFT HAND | 9 | |
| IAE1N200057 | DOLLY-WORKSTAND THRUST REVERSER LEFT HAND | 1 | |
| IAE1N20006 | DOLLY-WORKSTAND THRUST REVERSER RIGHT HAND | 8 | |
| IAE1N20007 | DOLLY-WORKSTAND THRUST REVERSER LEFT HAND | 10 | |
| IAE2R19426 | WORKING STANDARD | 2 | |
| IAE2R19819 | CALIBRATION WORKING STANDARD | 1 | |
| IAE2R19854 | WORKING STANDARD (PART OF IAE2R19878) | 1 | |
| IAE2R19860 | WORKING STANDARD | 1 | |
| IAEIN20005 | DOLLY-WORK STAND THRUST REVERSER LEFT HAND | 1 | |
| J32091-4 | TEST EQPT - SENSOR FIXTURE KIT FOR B32039 STAND (WORKS WITH OPTIONAL J32091-7 MACRO SET) J32091-4 | 1 | |
| J32091-5 | TEST EQPT - SENSOR FIXTURE KIT FOR G32009 STAND (WORKS WITH OPTIONAL J32091-9 MACRO SET) | 1 | |
| J78019-1 | STAND-TRANSPORT/WORK | 1 | |
| J78019-72 | TRANSPORTATION/WORK STAND - | 1 | |
| J78019-85 | STAND - TRANSPORTATION/WORK, RR TRENT 800 THRUST REVERSER | 6 | |
| J78031 | STAND - TRANSPORTATION/WORK GE90 THRUST REVERSER | 1 | |
| J78031-140 | Stand -transportaion/work GE90 thrust reverser | 3 | |
| J78031-146 | STAND - TRANSPORTATION/WORK, GE90 THRUST REVERSER | 4 | |
| J78031-85 | STAND - TRANSPORTATION/WORK GE90 THRUST REVERSER | 7 | |
| J78038-1 | Transportation/work stand-thrust reverser | 1 | |
| K-2032 | ADAPTER ENGINE WORK STAND | 5 | |
| K-2769 | PW-545a Adapter Kit for Engine Work Stand | 4 | |
| K20005 | WORK TABLE PILOT'S AISLE STAND | 1 | |
| K20005-1 | WORK TABLE - PILOT'S AISLE STAND | 2 | |
| K78008-1 | STAND - TRANSPORTATION/WORK GENERAL ELECTRIC GEnx THRUST REVERSER | 7 | |
| K78010-72 | TRANSPORTATION/WORK STAND - THRUST REVERSER, ROLLS-ROYCE TRENT 1000 | 5 | |
| LTCT7298-07 | ENGINE WORK STAND | 1 | |
| M346 SPAR 4 STD-1 | CUSTOM REFERENCE STANDARD, H346 SPAR 4 STD-1 HOLE INTERFACE WITH FLAPS HINGE REWORK. MATERIAL: 7050-T7451 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| MODEL 136 | STAND - WORK, GENERAL PURPOSE | 1 | |
| MS-0013-3A | WORKSTAND 2 STEPS | 1 | |
| MS-0521-001 | WORKSTAND 4 STEPS | 1 | |
| MS-0526-001 | WORKSTAND 5 STEPS | 1 | |
| MS0013-2A | WORKSTAND 3 STEPS | 1 | |
| MTSESBCFM56-3-5-7 | ENGINE WORK TRANSPORT STAND CFM56 | 1 | |
| PWA 107274 | ENGINE WORK STAND | 1 | |
| PWA107274 | ENGINE STAND WORK | 1 | |
| PWA88006 | DOLLY-WORKSTAND,THRUST REVERSER RH | 1 | |
| PWA88007 | DOLLY-WORKSTAND,THRUST REVERSER LH | 1 | |
| PWA88061 | WORKSTAND - INTAKE COWL | 2 | |
| RB T103363 | Combining Gear Box Work Stand | 1 | |
| RB211ENGW0RKSTAND | RB211 ENGINE WORKSTAND | 1 | |
| RBT18401 | Maintenance Work Stand | 1 | |
| RRT062470 | WORKING STANDARD TUBE | 1 | |
| RRT106887 | TURNOVER WORK STAND | 1 | |
| RRT112599 | MODULE 02 WORK STAND | 1 | |
| RRT115162 | WORKING STANDARD | 1 | |
| RSE1007 | DOLLY AND WORKSTAND-INLET COWL | 3 | |
| RSE1007 REV A | DOLLY, INLET COWL & WORK STAND | 1 | |
| RSE1021 | DOLLY, INLET COWL STORAGE AND WORK STAND | 4 | |
| RSE1021 REV D | DOLLY, INLET COWL STORAGE AND WORK STAND | 1 | |
| RSE1021-3B | DOLLY, INLET COWL STORAGE AND WORK STAND | 1 | |
| RSE1105 | DOLLY, INLET COWL & WORK STAND | 1 | |
| RSE1105 REV B | DOLLY, INLET COWL & WORK STAND | 1 | |
| RSE1108 | DOLLY-F-R WORKSTAND | 1 | |
| RSE1109 | DOLLY-F-R WORKSTAND | 1 | |
| RSE1116 | INLET COWL - WORK STAND | 14 | |
| RSE3408 | Inlet Cowl Workstand | 4 | |
| RSEI007 | DOLLY, INLET COWL & WORK STAND | 1 | |
| RSEI02I | DOLLY, INLET COWL STORAGE AND WORK STAND | 1 | |
| RSEII05 | DOLLY, INLET COWL & WORK STAND | 1 | |
| SEP RO 1750 | Workstand | 1 | |
| SEP RO 3000 | Workstand | 1 | |
| SEP RO 3700 | Workstand | 1 | |
| ST71240 | WORKING STAND | 2 | |
| STC 90446-1/-2 | STAND, ENGINE WORK | 1 | |
| STC90446- 80-1/-2 | STAND, ENGINE WORK | 1 | |
| STK35753 | WORK STAND BENCH CLAMP | 1 | |
| STK35756 | WORK STAND WHEELER | 1 | |
| TB3016G004 | WORKING STAND | 1 | |
| TB3016G005 | WORKING STAND | 1 | |
| TB3016G006 | Working Stand | 1 | |
| TB3027G001 | WORKING STAND | 1 | |
| TB3027G002 | WORKING STAND | 1 | |
| TB3113G001 | Working Stand | 1 | |
| TME608C0100 | GENX-2B THRUST REVERSER HALF WORKING STAND | 1 | |
| TMH SD16 | Working Stand - CFM56 ENGINE | 1 | |
| WCI-TK-06-2-N-2150 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-06-2-N-_2150 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-10-1-N-.3245 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-10-1-N-3245 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-10-2-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-12-1-N | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-1-N-.3870 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-1-N.3870 | COLD WORKING TOOL STANDARD | 2 | |
| WCI-TK-12-2-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-12-2-N-.4025 | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-16-1-N | COLD WORKING TOOL STANDARD | 1 | |
| WCI-TK-16-1-N-.5120 | COLD WORKING TOOL STANDARD | 1 | |
| WORK STAND | WORK STAND 7.5FT | 1 | |
| WORK STAND (TAIL) | WORK STAND (TAIL) 7.5 FT | 1 | |
| Z-45-25J | STAND-WORK ( WORKING HEIGHT 4-21 FEET) | 1 | |
| lC5830 | STAND, REWORK & STORAGE LPT ROTOR, VERTICAL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
