| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| MPT-250B | WIRE CRIMP | 1 | |
| PWC12A | WIRE CRIMP | 1 | |
| PWC14 | WIRE CRIMP | 2 | |
| PWC6 | WIRE CRIMP | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) MRT-250C | WIRE CRIMP PULL TESTER (CALIBRATION) | 1 | |
| 12145-020-001 | CRIMP TOOL LARGE GAGE WIRE | 1 | |
| 15N88-99 | Wire stripper & crimper | 1 | |
| 46673 | CRIMP TOOL - WIRE | 13 | |
| 57118-5000 | Hand Crimp Tool, 20-24 AWG Wire | 1 | |
| 57119-5000 | Hand Crimp Tool, 18-22 AWG Wire | 1 | |
| 576778 | COPPER WIRE CRIMPING TOOL AMP | 9 | |
| 576780 | COPPER WIRE CRIMPING TOOL AMP | 10 | |
| 58573-2 | PROCRIMP DIE SPARE WIRE CAP | 1 | |
| 63801-9100 | PT-1500 Bench-Top Wire Crimp Pull-Force Tester, Manual Lever-operated for 5.84mm 8-30 AWG | 1 | |
| 63811-9700 | Hand Crimp Tool for CP 2.8 Receptacle 14-16 AWG Type TXL Wire and>1.00-2.00mm² Type ID & ID Wire with 2.80mm, CMC Wire Seal Receptacle | 1 | |
| 63811-9800 | Hand Crimp Tool for CP 2.8 Receptacle for 2.50-3.00mm Type ID and IR Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63811-9900 | Hand Crimp Tool for CP 2.8 Receptacle 12-10 AWG Type TXL Wire and>3.00-5.00mm² Type ID & ID Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63813-3200 | Extraction Tool for Compact Robot Connector Crimp Female Terminal for 18-28 AWG Wire | 1 | |
| 63813-3400 | Extractor Tool for 1.25mm Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63813-3700 | Extractor Tool for 1.50mm Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63819-0300 | Hand Crimp Tool for 1.25mm Pitch Crimp Terminals, 26-32 AWG Wire | 1 | |
| 63819-0400 | Hand Crimp Tool for 1.25mm Pitch Crimp Terminals, 26-32 AWG Wire | 1 | |
| 63819-0900 | Hand Crimp Tool for Male and Female Crimp Terminals, 16-24 AWG Wire | 2 | |
| 63819-1500 | Hand Crimp Tool for 1.00mm Wire-to-Board Crimp Terminal, 28-32 AWG Wire | 1 | |
| 63819-1700 | Hand Crimp Tool for 3.96mm Humpback with Anti-Fish Hook Crimp Terminals, 18 AWG Wire | 1 | |
| 63819-1800 | Hand Crimp Tool for Male and Female Crimp Terminals, 18-20 AWG Wire | 1 | |
| 63819-2200 | Hand Tool for Power Crimp Pin, 14-18 AWG Wire | 1 | |
| 63819-2300 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Terminals | 1 | |
| 63819-2800 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Crimp Terminals, 22-26 AWG Wire | 1 | |
| 63819-3400 | Hand Crimp Tool for CP 2.8 Receptacle 18-20 AWG Type TXL Wire and 0.50-0.75mm² Type ID & ID Wire with 2.80mm, CMC Wire Seal Receptacle | 1 | |
| 63819-3500 | Hand Crimp Tool for CP 2.8 Receptacle 1.00mm Type ID & ID Wire with 2.80mm², CMC Wire Seal Receptacle | 1 | |
| 63819-3600 | Hand Tool for 3.96mm Crimp Terminals, 18-20 AWG Wire | 1 | |
| 63819-3900 | Hand Crimp Tool for CTX 1.50mm Receptacle Terminal, 0.30, 0.35, and 0.50mm² Wires | 1 | |
| 63819-4300 | Hand Crimp Tool for Wire-to-Board Terminal, 28-30 AWG Wire for Loose Parts Only | 1 | |
| 63819-4400 | Hand Tool for 1.25mm Wire-to-Board Crimp Terminal, 26-28 AWG Wire | 2 | |
| 63819-4500 | Hand Crimp Tool for 1.75mm Wire-to-Board Crimp Terminal, 24-28 AWG | 1 | |
| 63819-4600 | Hand Crimp Tool for Wire-to-Board Terminal, 24-28 AWG Wire | 1 | |
| 63819-4800 | Hand Tool for 1.20mm Crimp Terminals, 28 AWG Wire for Reeled Product | 1 | |
| 63819-5300 | Hand Crimp Tool for Bulb Socket Wedge Terminal for 0.50 to 0.85mm² wire used with Wire Seal | 1 | |
| 63819-5700 | Hand Tool for Wire to motor Connector Crimp Terminals, 0.3 to 0.52mm wire size | 1 | |
| 63819-6900 | Hand Crimp Tool for Industry standard 1.78mm Tab Terminals, 24-26 AWG Wire | 1 | |
| 63819-7500 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63819-7600 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63819-7700 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63819-9900 | Hand Tool for Power Crimp Sockets, 14-18 AWG Wire | 1 | |
| 63823-0100 | Hand Tool for 1.20mm Crimp Terminals, 30 AWG Wire for Reeled Product | 1 | |
| 63823-0900 | Hand Crimp Tool for 1.00mm Wire-to-Board Crimp Terminals | 1 | |
| 63823-3400 | Hand Crimp Tool for Wire-to-Board Terminals | 1 | |
| 63823-5100 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Crimp Terminal | 2 | |
| 63823-5200 | Hand Crimp Tool for 2.50mm / 3.00mm Pitch Wire-to-Board Female Crimp Terminal | 1 | |
| 63823-5300 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63823-5400 | Hand Crimp Tool for Wire-to-Wire and Wire-to-Board Terminals | 1 | |
| 63823-5900 | Hand Crimp Tool for Wire-to-Board Crimp Terminals | 1 | |
| 63823-7500 | Hand Crimp Tool for 2.50mm Wire-to-Board Crimp Terminals | 1 | |
| 63823-8000 | Hand Crimp Tool for 2.50mm Pitch Wire to Wire Crimp Terminals | 1 | |
| 63823-8700 | Hand Crimp Tool For 3.50 Wire-to-Wire Connector, Crimp Pin | 1 | |
| 63823-8800 | Hand Crimp Tool For 3.50 Wire-to-Wire Connector, Crimp Pin | 1 | |
| 63823-8900 | 1.0 Receptacle Crimp Terminals – AVS wire | 1 | |
| 63823-9800 | Hand Crimp Tool for 2.00mm Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63825-1200 | Hand Crimp Tool for 1.50mm (.059") Pitch CLICK-Mate™ Wire-to-Board Crimp Terminal | 2 | |
| 63825-2100 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-2200 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-2275 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-2500 | Hand Crimp Tool for 1.25mm (.049”) / 2.00mm (.078”) Wire-to-Board Crimp Terminal | 1 | |
| 63825-3200 | Hand Crimp Tool for .110 Receptacle Terminals (Magnet Wire) | 1 | |
| 63825-3300 | Hand Crimp Tool 1.25mm (.049”) / 2.00 (.078”) Wire-to-Board Crimp Terminal | 1 | |
| 63825-5000 | Hand Crimp Tool for 2.50mm Pitch Floating Wire-to-Board Plug Crimp Terminal | 1 | |
| 63825-9400 | Hand Crimp Tool For Wire to Motor Crimp Terminals | 1 | |
| 63827-0900 | Hand Crimp Tool for Wire-to-Board Crimp Terminals | 1 | |
| 63827-1000 | Hand Crimp Tool for IllumiMate™ 1.25mm Wire-to-Board Crimp Terminals | 1 | |
| 63827-2300 | Hand Crimp Tool for IllumiMate™ 1.25mm Wire-to-Board Crimp Terminals | 1 | |
| 63827-4600 | Hand Crimp Tool for 2.00mm (.079") Pitch Wire-to-Board Crimp Terminal | 1 | |
| 63827-5100 | 1.0 Receptacle Crimp Terminals – CAV wire Doc | 1 | |
| 63827-5200 | 1.0 Receptacle Crimp Terminals – CAVUS wire | 1 | |
| 63910-8400 | T2 Terminator for Crimp Terminal, Female 18-24 AWG Wire | 1 | |
| 64001-7500 | Hand Crimp Tool for Butt Splice 10-12 AWG Wire | 1 | |
| 64003-7300 | Right Hand Crimp Tool for Female Non-Insulated Standard Quick Disconnects, 12-16 AWG Wire | 1 | |
| 69272-1 | CRIMP TOOL - AMP (SAHT SPARE WIRE CAP .036 - .138) | 8 | |
| 782-1343 | CERTI-CRIMP II HAND RATCHETING CRIMP TOOL FOR MULTIMATE TYPE III+ CONTACTS, 0.2 → 1.25MM² WIRE | 1 | |
| 947679-1 | CRIMP TOOL HE13/14 CRIMP-ON & SNAP-IN CONTACTS, 28 → 24 AWG WIRE SIZE | 1 | |
| AC2D | CRIMPED WIRE BRUSH | 1 | |
| BLPES668 | AUTOMATIC WIRE STRIPPER/CRIMPE | 1 | |
| CAT-HT-246-1416-14 | SAMTEC CAT HAND RATCHETING CRIMP TOOL FOR CC46L CONTACTS, CC46R CONTACTS, 1.31MM² WIRE | 2 | |
| CTL9425111T | 11WRT WIRE ROPE CRIMP & CUTTING TOOL | 1 | |
| DA76080 | Klenk Tools DA76080 Black Handle 6 Electrical Model Two-in-One Wire StripperCrimper Tool | 1 | |
| DMC1264 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM). (DANIELS MANUFACTURING CORPORATION) | 7 | |
| DMC1430 | WIRE CRIMPER SET | 2 | |
| EP00M96R | WIRE CRIMPING SET | 4 | |
| EP03-66 | WIRE CRIMPING KIT | 2 | |
| EP04-62 | WIRE CRIMPING SET - ASNE0466TS0405 | 3 | |
| EP06-59 | WIRE CRIMPING KIT | 1 | |
| G01J3P3 | KIT, CRIMP TOOL - ELECTRICAL CONNECTOR REF FOUND IN STANDARD WIRE PRACTICES MANUAL (SWPM) (GRAPHIC DATAKITS INTERNATIONAL (6495 CORP.)) | 1 | |
| HE13 | CRIMP TOOL HE13/14 CRIMP-ON & SNAP-IN CONTACTS, 28 → 24 AWG WIRE SIZE | 1 | |
| JPK4 | PLIERS KIT, JOURNEYMAN, 4 PIECE, INCLUDING 8" DIAGONAL CUTTER, 8" HD LONG-NOSE WITH SIDE CUTTER AND WIRE STRIPPER, 9" NE-STYLE SIDE CUTTER WITH CRIMPER AND 9" CABLE CUTTER, MAKE: KLEIN TOOLS | 1 | |
| KLE1005 | WIRE CRIMPER | 1 | |
| M22520-5-01 | CRIMPER WIRE/CABLE | 23 | |
| M22520/2-01 | WIRE CRIMP TOOL | 18 | |
| M22520/2-06 | DMC AFM8 CRIMP TOOL, CRIMP QUALIFIED TO M22520/2-01, WIRE RANGE 32-20 AWG | 10 | |
| MPT-250C | Motorized Wire Crimp Pull Tester | 2 | |
| MPT-250C-SC | Alphatron® Motorized Wire Crimp Pull Tester w/ Safe-T-Cable® Pull & Grip Set | 1 | |
| MY29-11 | CRIMP TOOL - BURNDY (Wire lug crimping tool) | 2 | |
| PT-150HA | WIRE CRIMP PULL TESTER | 2 | |
| PWC14 | WIRE STRIPPER, CRIMPER, CUTTER | 2 | |
| PWC28A | WIRE STRIPPER/CUTTER/CRIMPER | 5 | |
| PWC30 | WIRE CRIMPERS | 1 | |
| PWC9 | WIRE STRIPPER/CUTTER/ CRIMPER/BOLT CUTTER | 1 | |
| RM20M12D28 | Souriau, Size 16 Crimp Pin Contact, for 22-20 AWG Wire, Gold Plated, Allied p/n 678-0234 | 1 | |
| SAG18950 | WIRE STRIPPER,CUTTER,TRM,CRIMP | 1 | |
| TBM14MC | AIRCRAFT WIRE CRIMP TOOL | 1 | |
| TR-490 | WIRE SPLICE CRIMPING TOOL, FOR LIGHT HARNESS | 9 | |
| W004163A | 582 PCS CRIMP TERMINALS WIRE CONNECTORS HEAT SHRINK TUBE ELECTRICAL REPAIR KIT WITH WIRE CUTTER STRIPPER | 1 | |
| Y539 | DIE SET: HEX,WIRE CRIMPER | 8 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
