| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A5068 | UT Transducer | 3 | |
| AFS-1070AS | UT TRANSDUCER | 1 | |
| CX1070AT | UT TRANSDUCER | 1 | |
| LA-705S | UT TRANSDUCER | 2 | |
| SUS921L | UT TRANSDUCER | 2 | |
| SUS921R | UT TRANSDUCER | 2 | |
| SUSM1070AS | UT TRANSDUCER | 1 | |
| TEK5017-1 | UT TRANSDUCER | 1 | |
| TEK5017-7 | UT TRANSDUCER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0111 | ABSOLUTE PRESSURE TRANSDUCER | 1 | |
| 0339-99 | Langa 0339-99 Fully Automatic control system w/Lineal Transducers | 2 | |
| 113-241-043 | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) GAMMA RHP 1MHZ X 0.5' TRANSDUCER | 1 | |
| 113-244-043 | WAYGATE KRAUTKRAMER (FORMERLY GE INSPECTION TECHNOLOGIES) GAMMA RHP 5MHZ X 0.5' TRANSDUCER. COUNTRY | 1 | |
| 1695000-0300 | TRANSDUCER INPUT CABLE 300 INCHES | 1 | |
| 362-002-245 | KRAUTKRAMER BRANSON CUSTOM ACRYLIC TRANSDUCER WEDGE 45.6°, .812" RADIUS. INCLUDES CERTIFICATE OF CONFORMANCE. | 1 | |
| 389.044.140 | KRAUTKRAMER ULTRASONIC TRANSDUCER 10 MHZ, 75 DEGREE-MICRODOT CONNECTOR | 1 | |
| 5007 | TRANSDUCER (FüR LEMO 1 CONNECTOR FüR KARL DEUTSCH | 4 | |
| 904-3383A | Helmuth Bracket Transducer .38 HL SS | 1 | |
| A32069 | WRENCH ADAPTER RETAINER NUT ANTI SKID TRANSDUCER | 1 | |
| A32069-1 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 1 | |
| A32069-7 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 20 | |
| A571S-RM | UT Transducer A571S-RM 5MHz, 45 degree, Steel (NDT) | 2 | |
| A572S-RM | UT Transducer A572S-RM, 5MHz, 60 degree, steel (NDT) | 2 | |
| A573S-RM | UT Transducer A573S-RM, 5MHz, 70 degree, steel (NDT) | 2 | |
| A573SRM | UT TRANSDUCER A573S-RM, 5MHZ, 70 DEGREE, STEEL (NDT) | 2 | |
| A591S-RM | UT Transducer A591S-RM, 5MHz, 45 degree, Al (NDT) | 1 | |
| A592S-RM | UT Transducer A592S-RM, 5MHz, 60 degree, Al (NDT) | 1 | |
| A593S-RM | UT Transducer A593S-RM, 5MHz, 70 degree, Al (NDT) | 2 | |
| AFC-1012HT | High Damped High Resolution Contact Transducer, 10 MHz, 0.125 in. Element Diameter, .25"Ø Fingertip Case Style, top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AT | A 5 MHZ TRANSDUCER WITH A TOP MOUNTED CONNECTOR THAT PUTS A 60 DEGREE SHEAR WAVE INTO ALUMINUM. APPROXIMATE CASE DIMENSIONS: 0.750 INCH (19.05 MM) LON | 1 | |
| AFNDT-FBH30AL | Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel dista... | 1 | |
| AFNDT-FBH30CS | Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel dista... | 1 | |
| AFP-7512 | 7.5MHZ .125" dia. High Resolution focused Straight shaft pencil transducer with a .080" Replaceable tip. Standard microdot connector. ( K-PEN style ) | 1 | |
| AFP-7512/90 | 7.5MHZ 90° angle head. High Resolution .125" dia focused pencil transducer with a .080" Replaceable tip. Standard microdot connector. K-PEN Style | 1 | |
| AFS-0528 | 42.5° SHEAWAVE TRANSDUCER, 5MHZ OUTER LUG INSPECTION, LOW PROFILE SIDE MOUNT CONNECTOR | 1 | |
| AFS-0529 | 33.5° 5MHZ SHEARWAVE TRANSDUCER, NOSE AERA OF LUG, LOW PROFILE SIDE MOUTN TRANSDUCER | 1 | |
| AFS-0541 | A 5 MHZ TRANSDUCER WITH A TOP MOUNTED CONNECTOR THAT PUTS A 75 DEGREE SHEAR WAVE INTO ALUMINUM. APPROXIMATE CASE DIMENSIONS: 0.750 INCH (19.05 MM) LON | 1 | |
| AFS-0566 | PROBE 5 MHZ TRANSDUCER THAT PUTS A 47 DEGREE SHEAR WAVE | 1 | |
| AFS-0569 | PROBE 5 MHZ TRANSDUCER THAT PUTS A 39 DEGREE SHEAR WAVE | 1 | |
| AFS-0576-L | PROBE 5 MHZ TRANSDUCERS THAT PUT A 25 DEGREE LONGITUDINAL WAVE | 1 | |
| AFS-0576-R | PROBE 5 MHZ TRANSDUCERS THAT PUT A 25 DEGREE LONGITUDINAL WAVE | 1 | |
| AFS-1012 | CUSTOM 10MHZ, 73° SHEAR WAVE TRANSDUCER. BOEING 727 UT INSPECTION FOR 57-10-27. | 1 | |
| AFS-1015 | UT TRANSDUCER 10MHZ 70° IN ALUMINUM, TOP MOUNT CONNECTOR | 1 | |
| AFS-1036 | CUSTOM 5MHZ 45° SHEAR WAVE TRANSDUCER (TEK-5086) .BOEING 767 UT INSPECTION FOR 57-20-04. | 1 | |
| AFS-1326L-O | CUSTOM 65 DEGREE IN ALUMINUM 5MHz (LEFT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT768 | 1 | |
| AFS-1326R-O | CUSTOM 65 DEGREE IN ALUMINUM 5MHz (RIGHT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT769 | 1 | |
| AFS-1327L-O | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT771 | 1 | |
| AFS-1327R-O | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT774 | 1 | |
| AFS-766-3 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Upper Surface. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-766/767-4 | CUSTOM 5MHz ANGLE BEAM TRANSDUCER .25" x .25" ELEMENT. USED WITH NDT766 Outboard Flange of the T-Chord/Lower Surface. Includes Test Report and Certificate of Conformance.REFERENCE: 777 PART 4 57-10-02 | 1 | |
| B32035 | INSTALL. TOOL SET-RTNR NUT, ANTI-SKID TRANSDUCER | 1 | |
| B32035 REV A | INSTALL. TOOL SET-RTNR NUT, ANTI-SKID TRANSDUCER | 1 | |
| B32035-10 | INSTALLATION TOOL SET - RETAINER NUT, ANTI-SKID TRANSDUCER | 14 | |
| BCM-74-6 | CABLE , 6-FOOT, MICRODOT/BNC CONNECTOR, FOR CONTACT TRANSDUCERS (LONGITUDINAL) FOR UT | 1 | |
| C15L | UTTransducer C15L( 5MHz, .25 diam).C15L-RM | 1 | |
| C32021 | WRENCH SET RETAINER NUT REMjINSTL ANTI SKID TRANSDUCER MLG | 1 | |
| C32021-1 | Wrench Set - Retainer Nut, Removal/Installation, Anti-Skid Transducer, Main Landing Gear | 24 | |
| C32021-2 | SET-TOOL MLG ANTI SKID TRANSDUCER RETAINER NUT | 1 | |
| CLF 4 | ULTRASONIC TRANSDUCER OR DMS GO UT THICKNESS GAUGE | 1 | |
| CLF4 | ULTRASONIC TRANSDUCER FOR DMS GO+ UT THICKNESS GAUGE | 1 | |
| CM0108S | UTTransducer ( 1MHz .5 diam) CM-0108-S-RM | 1 | |
| CM0508R | UTTransducer ( 5MHz .5 diam) CM-0508-R-RM | 1 | |
| CM1008R | UT Transducer ( 10MHz .5 diam). CM-1008-R-RM | 1 | |
| D798-LF | UT THICKNESS GAUGING TRANSDUCER | 1 | |
| F80218-40 | Test Set -Force Transducer. Control Wheel Steering Sp77 Auto Pilot Only | 2 | |
| F80218-41 | Test Set -Force Transducer. Control Wheel Steering Sp177 / Sp300 Auto Pilot | 3 | |
| G689708 | OUTPUT SHAFT TORQUE TRANSDUCER | 1 | |
| GR0504 | UT Transducer (5MHz .25 diam, delay linelength10mm) GR-0504-RM | 1 | |
| GR2004 | UT Transducer ( 20MHz .25 diam, delay linelength10mm) GR-2004-RM | 1 | |
| HC-398-RA-RDL-L | UT TRANSDUCER RIGHT ANGLE HANDLE FOR MRT | 1 | |
| HC-398-RDL-L | UT TRANSDUCER STRAIGHT HANDLE FOR MRT | 1 | |
| KB-A 67572 | STRAIGHT BEAM-TYPE TRANSDUCER (KRAUTKRAMER BRANSON) | 1 | |
| MA-655S | UT TRANSDUCER, MA-655S | 1 | |
| MSWS 224-580 | TRANSDUCER, MINIATURE (GAMMA SERIES 5 MHZ) KRAUTKRAMER- BRANSON P/N MSWS 224-580 | 1 | |
| MWB 45-4(E) | KRAUTKRAMER 45° ANGLE BEAM TRANSDUCER 8X9 4MHz | 1 | |
| MWB 60-4(E) | KRAUTKRAMER 60° ANGLE BEAM TRANSDUCER 8X9 4MHz | 1 | |
| MWB 70-4(E) | KRAUTKRAMER 70° ANGLE BEAM TRANSDUCER 8X9 4MHz | 1 | |
| PAB-0504-90S-SM | UT TRANSDUCER 5MHZ 0.250" CRYSTAL 90 ACRYLIC WEDGE | 1 | |
| PAB-1004 | UT Transducer p/n PAB-1004 ( 10MHz, 60 degree steel, side connector) | 1 | |
| PAB-1004-45-AL-RM | UT Transducer PAB-1004 ( 10MHz, 45degree Al, side connector) | 1 | |
| PAB-1004-45-ST-RM | UT Transducer PAB-1004 ( 10MHz, 45degree steel, side connector) MINI | 1 | |
| PAB-1004-60-AL-RM | UT Transducer 10MHz, 60 degree Al, side connector (NDT) | 1 | |
| PAB-1004-70-AL-SM | UT Transducer PAB-1004 ( 10MHz, 70 degree Al, side connector) | 1 | |
| PWC34460 | TRANSDUCER, MAIN OIL, PRESSUREE READ OUT | 1 | |
| RCSM-70-4MHZ-F89 | UT TRANSDUCER 4MHZ 70 | 1 | |
| SA-455T | SPECIAL UT TRANSDUCER, 5 MHZ, 45 DEGREE HAS A CASE 0.25 TO 0.26 INCHES WIDE AND MAXIMUM CASE LENGTH OF 0.50 INCHES, TOP MOUNTED, CAN FIT INTO TRANSDUCER POSITIONER NDT6048P. | 1 | |
| SUC166-8T | UT Transducer, 5MHz, 6mm element diam, gamma, 10mm diam, 13 mm long (NDT) | 3 | |
| SUS676-T1 | SUS676-T1,UT TRANSDUCER | 1 | |
| SUS676-T2 | SUS676-T2,UT TRANSDUCER | 1 | |
| TC-2510S | Contact Transducer, 10MHZ, .25" Element, Side Mount, .312 Case. Customer to specify with or without Knurling, | 1 | |
| TC7 | UT TRANSDUCER, 5MHZ, 6MM ELEMENT DIAM, GAMMA, 10MM DIAM, 13 MM LONG (NDT) | 1 | |
| TC8-1210H | Transducer, 10MHz, .125", .190"OD x .8" Long, Hardwired (ORDER FROM UTX), NDT690, NDT689, NDT687 | 1 | |
| TEK-5043 | UT Transducer, A320 57-29-03 | 1 | |
| TEK-5054 | 5 MHZ Transducer .25 crystal dia, crystal is set to 35 deg angle in steel, transducer case .985 radius to fit the outer dia for the crossbolt | 1 | |
| TEK-5127L-0 | UT PROBE / TRANSDUCER | 1 | |
| TEK-5127L-1 | UT PROBE / TRANSDUCER | 1 | |
| TEK-5127R-0 | UT PROBE TRANSDUCER | 1 | |
| TEK-5127R-1 | UT PROBE/ TRANSDUCER | 1 | |
| TEK-5154 | Transducer, Boeing 35° in Alum and 42° in Alum, 1 ring (to fit collar/nut) plus 2 transducers | 1 | |
| TEK-5168 | SUS676-T1,UT TRANSDUCER | 1 | |
| TEK-5169 | SUS676-T2,UT TRANSDUCER | 1 | |
| TEK-5510L-O | Transducer, Outboard, for NDT768 | 1 | |
| TEK-5510R-O | Transducer, Outboard, for NDT769 | 1 | |
| TEK-5549 | UT TRANSDUCER 10MHZ 70° IN ALUMINUM, TOP MOUNT CONNECTOR | 1 | |
| TEK-5567 | MHz deg., radius low profile transducer, outboard lug | 1 | |
| TRD-1210 | Replaceable Delay Line Transducer, .400" OD, .125" ES, 10 MHz (order from UTX) | 1 | |
| TRD-1215 | Replaceable Delay Line Transducer, .400" OD, .125" ES, 15 MHz (ORDER FROM UTX) | 1 | |
| TRD-1220 | Replaceable Delay Line Transducer, .125" Element x 20 MHz with Ø.190" x .390 LONG Delay for thickness measurement (ORDER FROM UTX) | 1 | |
| TRD-2510 | Delay Line Transducer, .39" Replaceable Delay, 10 MHz x Ø.25", Side Microdot (ORDER FROM UTX) | 1 | |
| TRD-255-T | Delay Line Transducer, .39" Replaceable Delay, 5 MHZ x Ø.25" (6mm) crystal, Top mount Microdot (ORDER FROM UTX) | 1 | |
| V101-RM | UT Transducer V101-RM ( 0.5MHz 1.0 diam) | 1 | |
| V103-RM | UT Transducer V103-RM ( 1MHz .5 diam) | 1 | |
| V260-SM 15/0.125 | DELAY LINE “PENCIL” PROBE UT TRANSDUCER WITH STRAIGHT HANDLE. FREQUENCY 15MHZ, NOMINAL ELEMENT DIAMETER 0.125”. | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
